Pasar al contenido principal

DESARROLLO DE MATERIALES BIOPOLIMERICOS SOSTENIBLES PARA APOSITOS

PID2022-136516OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Adhesives Based on Poly(glycidyl methacrylate-co-butyl acrylate) with Controlled Structure: Curing Behavior and Adhesion Properties on Metal Substrates

  • Cañamero, Pedro
  • Fernández García, Marta
  • de la fuente, Jose Luis
The adhesion properties of poly(glycidyl methacrylate (GMA)-co-butyl acrylate (BA)) statistical copolymers, synthesized by atom transfer radical polymerization (ATRP), are investigated employing three different curing agents or hardeners, such as diethanolamine (DEA), dicyandiamide (DICY), and 2-cyanoacetamide (2-CA) on copper, iron, brass, aluminum, and titanium metal surfaces. This work describes the treatment of the different surfaces, establishes the optimal curing conditions from differential scanning calorimetry (DSC) analysis of these novel adhesive systems, and evaluates the results of the single-lap shear test for metal joints. Thus, by dynamic DSC measurements of the mixtures, a low curing temperature of 90 °C is defined when DEA is used as a curative; while systems based on DICY and 2-CA require temperatures of 150 °C and 160 °C, respectively. In addition, the curing process of this controlled acrylic copolymer with DICY exhibits a singular behavior, possibly due to the curing reaction mechanism, where multiple epoxy-amine ring-opening polyaddition reactions take place between DICY's active hydrogens and epoxy groups of poly(GMA-co-BA). This latter curing system shows the highest adhesion features with lap-shear strength at room temperature of 15.5 MPa, using copper as metallic substrate; however, the best results are obtained using 2-CA as curing agent with aluminum and iron., This work was funded by the MICINN (project PID2022-136516OB-I00), the Agencia Estatal de Investigación (AEI,Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU). The authors used the research facilities of the ICTP and were supported by the INTA., Peerreview
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adhesives Based on Poly(glycidyl methacrylate-co-butyl acrylate) with Controlled Structure: Curing Behavior and Adhesion Properties on Metal Substrates

  • Cañamero, Pedro
  • Fernández-García, Marta
  • Fuente, José Luis de la
The adhesion properties of poly(glycidyl methacrylate (GMA)-co-butyl acrylate (BA)) statistical copolymers, synthesized by atom transfer radical polymerization (ATRP), are investigated employing three different curing agents or hardeners, such as diethanolamine (DEA), dicyandiamide (DICY), and 2-cyanoacetamide (2-CA) on copper, iron, brass, aluminum, and titanium metal surfaces. This work describes the treatment of the different surfaces, establishes the optimal curing conditions from differential scanning calorimetry (DSC) analysis of these novel adhesive systems, and evaluates the results of the single-lap shear test for metal joints. Thus, by dynamic DSC measurements of the mixtures, a low curing temperature of 90 °C is defined when DEA is used as a curative; while systems based on DICY and 2-CA require temperatures of 150 °C and 160 °C, respectively. In addition, the curing process of this controlled acrylic copolymer with DICY exhibits a singular behavior, possibly due to the curing reaction mechanism, where multiple epoxy-amine ring-opening polyaddition reactions take place between DICY's active hydrogens and epoxy groups of poly(GMA-co-BA). This latter curing system shows the highest adhesion features with lap-shear strength at room temperature of 15.5 MPa, using copper as metallic substrate; however, the best results are obtained using 2-CA as curing agent with aluminum and iron., This work was funded by the MICINN (project PID2022-136516OB-I00), the Agencia Estatal de Investigación (AEI,Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU). The authors used the research facilities of the ICTP and were supported by the INTA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functionalization of chitosan films using essential oils by supercritical CO2 impregnation method for various applications

  • Muñoz-Núñez, Carolina
  • Hevilla, Víctor
  • Blázquez-Blázquez, Enrique
  • Zagora, Jakub
  • Placha, Daniela
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
Herein, chitosan films obtained by different approaches were functionalized with essential oils, i.e. mentha, clove, and cinnamon, by Supercritical Solvent Impregnation method to impart antioxidant and antimicrobial activity. The films were prepared from solutions with two different polymer concentrations (1 and 2.5 wt%) following three methodologies: casting and then drying at air (25 ◦C, 39 % relative humidity), casting and drying at 60 ◦C in humid conditions (82 % relativity humidity) and casting and water elimination by a freeze-drying process. The films were, then, characterized by scanning electron microscopy and X-ray diffraction, proving that the thickness, porosity, and crystallinity of the films are highly dependent on the preparation method. These structural variations affected the impregnation of essential oils by supercritical fluids, in terms of the amount and composition of the active compounds. Subsequently, yellowness, antioxidant and antimicrobial properties of the impregnated films were evaluated. The results demonstrated that the impregnated films retained high concen- tration of essential oils, especially the films impregnated with clove and produced by the freeze-drying process due to their higher porosity and lower crystallinity. These films also exhibited superior antimicrobial activity against Gram-positive and Gram-negative bacteria in comparison with the other two analyzed preparation methods., This work was funded by the MICINN (PID2019-104600RB-I00 and PID2022-136516OB-I00), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU) and by CSIC (LINKA20364). C. Muñoz-Nuñez acknowledges MICINN for her PRE2020-093596 fellowship. D. Placha and J. Zagora acknowledge to the Doctoral grant competition VSB-Technical University of Ostrava, reg. n◦. CZ.02.2.69/0.0/0.0/19_073/0016945 within the Operational Programme Research, Development and Education, under project DGS/ INDIVIDUAL/2020-001 “Development of antimicrobial biobased poly- meric material using supercritical fluid technology”. This work was also financially supported by the European Union under the REFRESH – Research Excellence for Region Sustainability and High-tech Industries project number CZ.10.03.01/00/22_003/0000048 via the Operational Programme Just Transition. This paper was created as part of the project No CZ.02.01.01/00/22_008/0004631 Materials and technologies for sustainable development within the Jan Amos Komensky Operational Program financed by the European Union and from the state budget of the Czech Republic.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phase transitions in mixtures based on poly(lactic acid) and two polymeric nucleants processed under a fast or slow cooling from the melt

  • Barranco-García, Rosa
  • Muñoz-Bonilla, Alexandra
  • Cerrada, María L.
  • Echeverría, Coro
  • Fernández-García, Marta
Mixtures based on two different poly(lactic acid)s (PLA) matrices and two distinct nucleating agents, incorporated at several contents, were prepared by extrusion. Furthermore, two thermal treatments were applied during the processing of films from the melt: a quenching (Q) and a slow (S) cooling. Crystalline characteristics of the resultant polymeric systems were mainly triggered by the PLA matrix used and by the cooling rate applied, turning out less important the nature of the nucleant. Thus, stereocomplex crystals were developed almost exclusively in the Q samples while coexistence of homo and stereocomplex crystallites was noticed when slow cooling was imposed. The type of homocrystallites present in the specimens was also dependent on the cooling rate applied during film processing. In the Q systems, crystals were grown on heating through a cold crystallization, as observed by differential scanning calorimetry; while they were developed along the cooling stage in the S materials. Influence of these structural characteristics on mechanical response was also evaluated by microhardness measurements., This work was funded by the Ministerio de Ciencia e Innovación (projects PID2020-114930GB-I00, PID2021-123553OA-I00 and PID2022-136516OB-I00), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU) as well as PTI Salud Global belonging to CSIC. R.B.-G. thanks the Ministerio de Ciencia e Innovación for her Juan de la Cierva contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of Different Concentrations of Antimicrobial Quaternary Polymers on the Behavior of Gelatin- and Starch-Based Films

  • Cottet, C.
  • Fernández-García, Marta
  • Peltzer, M. A.
Nowadays, incorporating quaternary ammonium groups into polymers is one of the most promising strategies for preparing antimicrobial biomaterials for general applications. The main objective of this work was to evaluate the effect of different concentrations of antimicrobial quaternary polymers in gelatin- and starch-based films for the development of active materials intended for applications in food packaging and medical fields. Two antimicrobial biobased polymers, called MeFPIAx (MeFPIA1 and MeFPIA2), were previously synthesized through the radical polymerization of itaconic acid (IA), followed by their subsequent functionalization and modification. Both polymers were incorporated into a new blend of gelatin and starch (15% w/w, 4:1 mass ratio), using glycerol (30% w/w) as a plasticizer. Films were prepared using the casting technique from aqueous dispersions of the polymers and their structure was characterized by Fourier Transform Infrared Spectroscopy with Attenuated Total Reflectance (FTIR-ATR). The findings of this study showed the addition of MeFPIAx had a significant effect (p < 0.05), resulting in films with higher tensile strength (TS) and a higher Young’s modulus (YM), with values close to 20 MPa and exceeding 250 MPa, respectively. On the other hand, elongation at break (EB) values lower than 80% were obtained. Additionally, the swelling was reduced from ~400% to 100% and a reduction in water vapor permeability (P) was observed, thanks to the increased interaction between the polymeric chains. Differential scanning calorimetry (DSC) scans showed that the addition of MeFPIAx increased the glass transition temperatures (T) from 29 °C to 65 °C. Furthermore, thermogravimetry analysis (TGA) indicated an increase in the initial degradation temperatures, suggesting that the films were more thermally resistant. Finally, the films exhibited slight antioxidant activity but significant antimicrobial activity, achieving bacterial reduction values greater than 70% with the incorporation of MeFPIAx polymers against Gram-positive Staphylococcus aureus., Universidad Nacional de Quilmes (UNQ, Argentina) through R&D program PUNQ 827-1300/19.R 990/19, to the Agencia Nacional de Promoción Científica y Tecnológica (Argentina) through the PICT-2015-3150 (PRESTAMO BID 3497 OC-AR), CSIC (EMHE-CSIC Program 2017, MHE-200043) and MINECO (PID2022-136516OB-I00; AEI, Spain and FEDER, EU). Celeste Cottet received a scholarship from the Scientific Research Commission (CIC) and by the Spanish National Research Council (CSIC, España) through EMHE-CSIC Program 2017, MHE-200043.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bio-Based Citrate Plasticizers as Nucleating Agents for PLA Fibers: Unlocking Antioxidant and Antimicrobial Potential

  • Mena-Prado, Ignacio
  • Fernández-García, Marta
  • López García, Daniel
  • Limbo, Sara
  • Rollini, Manuela
  • Martins, Daniele Maria
  • Campo, Ángel Adolfo del
  • Muñoz-Bonilla, Alexandra
Nano/microfibers are ideal systems for active packaging due to their high surface area, which enables efficient delivery of active compounds, improves food safety and quality, and extends shelf life. Herein, polylactic acid (PLA) fibers were blended with antioxidant and antimicrobial bioplasticizers (CITREM and ACETEM) at 10 wt.% and produced by force spinning using a total polymer concentration of 20 wt.%. The resulting functional fibers were analyzed by Raman confocal microscopy and scanning electron microscopy, which demonstrated uniform fiber formation for most of the bioplasticizer formulations. Thermogravimetric analysis showed a slight decrease in thermal stability associated with plasticizer incorporation, while differential scanning calorimetry revealed a reduction in glass transition temperature and a significant increase in crystallinity, evidencing the nucleating action of CITREM and ACETEM. Antimicrobial activity was evaluated against Gram-positive and Gram-negative bacteria, and antioxidant activity was measured using the Blois method. The results indicate that these bioplasticizers impart new functionalities to PLA, including antimicrobial activity against Gram-positive bacteria and antioxidant properties. These findings provide preliminary evidence that bio-based CITREM and ACETEM can confer bioactive properties to PLA fibers, warranting further investigation of their performance in food contact applications and mechanical characterization to assess their suitability for active packaging., his work was supported by the EU H2020 Project, “Characterisation andHarmonisation for Industrial Standardisation of Advanced Materials”(CHARISMA), under Grant Agreement no. 952921 and by the Ministerio de Ciencia, Innovación y Universidades (PID2022-13651OB-100), theAgencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functionalizing Calendered PLA/PBAT Films with Natural Food Additives

  • Mena-Prado, Ignacio
  • Fernández-García, Marta
  • Blázquez-Blázquez, Enrique
  • Limbo, Sara
  • Rollini, Manuela
  • Martins, Daniele Maria
  • Fernández-Blázquez, Juan P.
  • Campo, Ángel Adolfo del
  • Muñoz-Bonilla, Alexandra
Herein, biodegradable and functional films based on PLA/PBAT (Ecovio<sup>®</sup>) blends were prepared by calandering processing that allows high-quality films and proper blend mixing. To provide functional properties such as antioxidant and antimicrobial activity, food additives were incorporated including sodium stearoyl lactylate (designated as E481) at 5 wt% and bioplasticizers derived from vegetable oils, namely CITREM (E472C) and ACETEM (E472A) at 10 wt%. Chitin nanocrystals were also added to enhance barrier and mechanical properties. The films of around 200 μm thick were produced resulting in uniform and high-quality materials. Scanning electron microscopy and confocal Raman microscopy demonstrated good mixing of PLA and PBAT biopolymers, as well as a homogeneous dispersion of the additives. This effective blending provides excellent mechanical performance, particularly elongation at break, with values approaching 500% for most of the prepared films. The additives had minimal effect on the crystallinity, thermal and barrier properties while imparting antioxidant and antimicrobial properties with negligible migration into food simulant media, bellow 0.08 mg/Kg in all the cases. Citroglycerides, mono-and diglycerides of fatty acids and sodium stearoyl lactylate provides Trolox equivalent antioxidant capacity (TEAC) values between 14 and 18 µmol Trolox/g, and were effective against Gram-positive Staphylococcus aureus and Listeria innocua achieving complete bacterial inhibition at the contact tested concentration (ΔLog CFU/mL: 4.54 and 3.71, respectively). Finally, the disintegration of the films under industrial composting condition was demonstrated; this issue is essential to evaluate the environmental impact of the packaging at the end of its life cycle., This work was funded by the EU H2020 Project, “Characterisation and Harmonisation for Industrial Standardisation of Advanced Materials” (CHARISMA), under Grant Agreement no. 952921 and by the Ministerio de Ciencia, Innovación y Universidades (PID2022-13651OB-100), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly effective antimicrobial surface modification of polylactide prepared by supercritical fluid technology

  • Zágora, Jakub
  • Rybková, Zuzana
  • Škrlová, Kateřina
  • Malachová, Kateřina
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
  • Plachá, Daniela
Raw data in Zenodo repository: 10.5281/zenodo.12934250, Antimicrobial surface treatment has emerged as an effective strategy to control microbial growth and mitigate infection spread across various materials, including plastics, metals, and textiles. These modifications enhance hygiene, extend material lifespan, and reduce environmental impact by lowering the need for frequent cleaning and disinfection. Their application spans healthcare, food production, and industry due to their ability to inhibit bacteria, fungi, and viruses. A variety of materials and methods are used to produce these modifications, with supercritical fluid technology (SFT) gaining prominence for its high efficiency and eco-friendliness. This study focuses on developing an antimicrobial surface by integrating poly[3‑butyl‑5-(2-methacryloyloxy)ethyl]-4-methylthiazol-3-ium iodide (PMTABul) with polylactide (PLA) using SFT. The resultant blend was characterized using spectroscopic, morphological, and thermal analysis techniques. Antimicrobial efficacy was assessed against bacterial strains Acinetobacter baumannii, Escherichia coli, Staphylococcus aureus , and methicillin-resistant Staphylococcus aureus (MRSA), demonstrating significant inhibition of biofilm formation (80–90%) and potential for broad-spectrum antimicrobial applications., This study was supported by project No CZ.02.01.01/00/22_008/ 0004631. “Materials and technologies for sustainable development” within the Jan Amos Komensky Operational Program financed by the European Union and from the state budget of the Czech Republic, and the financial support of the European Union under the REFRESH – Research Excellence For REgion Sustainability and High-tech Industries project number CZ.10.03.01/00/22_003/0000048 via the Operational Programme Just Transition. This study was also supported in „Advanced Materials for Energy and Environmental Technologies“project, reg. nr. CZ.02.01.01/00/23_021/0008592 within the Programme Johannes Amos Comenius. “ . This work is also part of the project PID2022–136516OB-I00 founded 501,100,011,033/FEDER, UE., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring the Surface of Polylactide/Poly(itaconate derivative) Fibers: A Path to Antibacterial Enhancement

  • Zágora, Jakub
  • Rybková, Zuzana
  • Škrlová, Kateřina
  • Malachová, Kateřina
  • Muňoz-Bonilla, Alexandra
  • Fernández-García, Marta
  • Plachá, Daniela
Polylactide (PLA) is a biodegradable polymer with satisfactory mechanical properties but lacks antimicrobial activity. In this work, PLA fibers were functionalized with a cationic derivative of poly-(itaconic acid) (PTTIBuI) and treated using supercritical carbon dioxide (scCO2). Electrospun PLA and PLA + PTTIBuI fibers were subjected to scCO2 treatment at 200 bar and 60 °C for 3 and 6 h and subsequently characterized. Surface analysis revealed wrinkling, crystallization, increased crystallinity, and reduced hydrophobicity after treatment. Antimicrobial testing showed that PLA + PTTIBuI fibers significantly inhibited biofilm formation, with stronger effects against Acinetobacter baumannii (50-60%) than against methicillin-resistant Staphylococcus aureus (43-55%). Long-term scCO2 exposure increased antibacterial activity, likely due to increased surface accessibility of cationic groups. These results demonstrate that the combination of poly-(itaconic acid)-based antimicrobial agents with supercritical fluid treatment is an effective strategy for tailoring PLA fibers with improved antimicrobial activity. The modified materials show strong potential for biomedical applications such as wound dressings and infection prevention agents., This study was supported by the project “Advanced Materials for Energy and Environmental Technologies,” reg. no. CZ.02.01.01/00/23_021/0008592, and the project “Materials and Technologies for Sustainable Development,” reg. no. CZ.02.01.01/00/22_008/0004631, both under the Jan Amos Comenius Operational Program, funded by the European Union and the state budget of the Czech Republic, and was also established with financial support from the European Union as part of the REFRESH project�Research Excellence for Regional Sustainability and High-tech Industries, project number CZ. 10.03.01/00/22_003/0000048, under the “Just Transition” Operational Program and the project. This work is also part of project PID2022-136516OB-I00, funded by MCIN/AEI/10.13039/501100011033/FEDER, EU, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced antimicrobial activity of cellulose nanocrystals with added triazole and imidazolium groups

  • Echeverría, Coro
  • Ayensa, Naroa
  • Barranco-García, Rosa
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
The development of sustainable materials with active functionalities is crucial for advancing a circular economy. Cellulose nanocrystals (CNCs), derived from the most abundant biopolymer, offer a renewable and biocompatible platform for such materials. In this work, CNCs were chemically modified with imidazolium and triazole-imidazolium cations to create sustainable antimicrobial agents. The strategies involved chlorination of CNCs, followed by two approaches, i) substitution with N-methyl imidazolium (MI) groups to obtain CNC-MI, or ii) a click chemistry reaction for triazole-imidazolium (TrMI) modification to obtain CNC-TrMI. The analysis of the modified CNCs using Fourier transform infrared spectroscopy (FTIR), elemental analysis, and solid-state nuclear magnetic resonance (ssNMR) confirmed the successful modifications, resulting in CNC-MI showing a 30% degree of substitution, and CNC-TrMI demonstrating a 50% degree of substitution. However, such modifications affected both the structure and thermal stability of the CNCs as determined by X-ray diffraction (XRD) and thermogravimetric analysis (TGA). Nevertheless, the resulting cationic CNC derivatives, confirmed by Zeta potential analysis, exhibited remarkable antimicrobial activity against both Gram-positive Staphylococcus epidermidis and Gram-negative Pseudomonas aeruginosa. In particular CNC-TrMI exhibited excellent activity giving a reduction of more than 99.99% against both bacteria., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. Ministerio de Ciencia e Innovación, PID2021-123553OA-I00, FJC2021 046585-I, PID2022-136516OB-I00, PID2022-136516OB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Datos experimentales asociados a publicaciones científicas sobre biomateriales, polímeros funcionales, bioplásticos, quitosano, PLA, ingeniería tisular y materiales antimicrobianos desarrolladas entre 2023 y 2026 en el marco del proyecto PID2022-136516OB-I00 /AEI/ 10.13039/501100011033/ERDF, UE.

  • Fernández-García, Marta
  • Muñoz-Bonilla, Alexandra
2. DESCRIPCIÓN DE LOS DATOS Los datos generados en estas publicaciones comprenden: A. Datos de caracterización físico-químicos Relacionados especialmente con: - Derivados metacrilicos e itacónicos - PLA y mezclas poliméricas - Quitosano y derivados - Celulosa y derivados [Técnicas] - FTIR - Raman - RMN (1H y 13C) - XRD - SEM - TEM - AFM - XPS - DSC - TGA - Cristalinidad - Ensayos de tracción - Módulo elástico - Resistencia máxima - Elongación a rotura, B. Datos microbiológicos Presentes en las publicaciones relativas a: - Membranas antimicrobianas - Films activos - Andamios para regeneración tisular - Superficies antibacterianas [Datos generados] - MIC - Actividad antifúngica - Recuento de UFC, C. Datos biológicos y de ingeniería tisular [Ensayos] - Citocompatibilidad - Viabilidad celular - Proliferación celular - Inmunomodulación - Estrés oxidativo - Adhesión celular [Técnicas] - MTT - Alamar Blue - Live/Dead - Microscopía confocal - ELISA, D. Datos de impregnación con CO₂ supercrítico Relacionados con las publicaciones: 3, 6 y 16 [Variables] - Presión - Temperatura - Tiempo de impregnación - Carga incorporada, 4. ORGANIZACIÓN Y DOCUMENTACIÓN. [Estructura de carpetas Proyecto PID2022-136516OB-I00]│ 1- Journal of Thermal Analysis and Calorimetry, 149, 6051, 2024 │ 2- International Journal of Molecular Sciences, 25, 1961, 2024 │ 3- Carbohydrate Polymer Technologies and Applications, 8, 100559, 2024 │ 4- Polymers, 16, 3168, 2024 │ 5- ACS Applied Material & Interfaces, 16, 70883, 2024 │ 6- Journal of Polymer and the Environment, 33, 96, 2025 │ 7- Packaging Technology and Science, 38, 511, 2025 │ 8- Journal of Polymer and the Environment, 33, 1337, 2025 │ 9- Carbohydrate Polymer Technologies and Applications, 11, 100915, 2025 │ 10- Polymers, 17, 2608, 2025 │ 11- International Journal of Molecular Science, 26, 10403, 2025 │ 12- Reactive and Functional Polymers, 218, 106554, 2026 │ 13- Carbohydrate Polymer Technologies and Applications, 13, 101069, 2026 │ 14- Green Chemistry, 28, 7029, 2026 │ 15- Journal of Polymers and the Environment, 34, 101, 2026 │ 16- Results in Engineering, 30, 110648, 2026 │ 17- Regenerative Biomaterials, 13, rbag077, 2026 │ 18- Macromolecular Chemistry and Physics, 227, e00473, 2026 │ 19- ACS Omega, 11, 46723, 2026 │ 20- Cellulose, 33, 6531, 2026 │ 21- Journal of Polymers and the Environment,, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Research data supporting the publications of the BE-ACTIVE project: cationic cellulose and cellulose nanocrystal derivatives, biobased antimicrobial polymers and PLA-based materials (PID2021-123553OA-I00)

  • Echeverría, Coro
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
  • Barranco-García, Rosa
  • Chiloeches, Alberto
  • Arnaldos-Perez, Irene
  • Ayensa Serrano, Naroa
  • Cerrada, María L.
[METHODOLOGICAL INFORMATION] 1. Description of methods used for collection/generation of data: Folder 02. Microcrystalline cellulose (Avicel PH-101) was chlorinated with thionyl chloride in DMF (3 h, 85 C) to give 6-chloro-6-deoxycellulose (Cl-Cel), purified by precipitation in cold water, neutralization with ammonium hydroxide, dialysis (5 days) and lyophilization. Cl-Cel was reacted with 1-methylimidazole (24 h, 95 C) to yield the cationic cellulose MIm-Cel, purified by precipitation in cold methanol, vacuum drying at 45 C and dialysis (48 h). Folder 04. Cellulose nanocrystals were chlorinated and then modified by two routes: direct substitution with N-methylimidazole to obtain CNC-MI, and azidation followed by Cu(I)-catalyzed azide-alkyne cycloaddition with 1-methyl-3-propargyl imidazole (PMDTA/CuCl, DMSO, 40 C, 48 h) to obtain CNC-TrMI. Products were purified by dialysis and lyophilization. Folder 01. A clickable polymer with pendant alkyne groups was synthesized from biobased itaconic acid and functionalized by click chemistry with thiazolium groups derived from vitamin B1 (PTTIQ) and with the antimicrobial peptide temporin L (PTTIQ-AMP). Both antimicrobial agents were incorporated into electrospun poly(lactic acid) fibres by supercritical CO2 impregnation. Folder 03. Mixtures of two poly(lactic acid) matrices with two polymeric nucleating agents at several contents were prepared by extrusion, and films were processed from the melt under two thermal treatments: quenching (Q) and slow cooling (S)., 2. Methods for processing the data: Spectra, diffractograms and thermograms were exported from the instrument software as ASCII tables and converted to CSV without smoothing, scaling or baseline manipulation beyond the background subtraction described below; decimal separators were normalized to the dot and column headers were added with explicit units. FTIR spectra were recorded in transmission or ATR mode after acquiring a background spectrum before each sample. Crystallinity indices were calculated from the diffractograms as CI (%) = Ac/Atotal x 100, where Ac is the integrated area of the crystalline peaks and Atotal the total integrated area. Degrees of substitution were calculated from the C, H, N and S contents obtained by elemental analysis., 3. Instrument- or software-specific information needed to interpret/reproduce the data: - Solid-state 13C NMR: Bruker Avance 400WB, wide-bore magnet (89 mm), 9.4 T, 400.14 MHz for 1H and 100 MHz for 13C, 296.5 K, acquisition time 0.05 s, 2000 scans. - FTIR: PerkinElmer Spectrum Two, transmission mode, KBr pellets (1 wt% sample), 400-4000 cm-1, resolution 4 cm-1. The ATR spectra of folder 03 were recorded on the same instrument with an ATR accessory. - Elemental analysis: LECO CNHS932 elemental microanalyzer (C, H, N, S). - X-ray diffraction: Bruker D8 Advance, Cu K-alpha radiation. Folder 02: lambda = 1.54 A, 2theta = 4-60 degrees, step 0.024 degrees, 0.5 s per step. Folder 04: Bragg-Brentano reflection geometry, Ni-filtered Cu K-alpha (lambda = 1.5418 A), Vantec1 detector, silicon zero-background holder, 2theta = 4-60 degrees, step 0.02 degrees, 0.2 s per step. - Thermogravimetric analysis: TA Instruments Q500, 25-800 C (folder 02: up to 830 C), heating rate 10 C/min, nitrogen atmosphere. - Electron microscopy: Hitachi SU 8000 FE-SEM; for TEM imaging of nanocrystals, dispersions in acetone deposited on carbon-coated copper grids and dried at room temperature. - Differential scanning calorimetry and microhardness (folder 03):, 4. Standards and calibration information: Antibacterial assays of folder 04 followed standard ASTM E2149-20 (antimicrobial activity under dynamic contact conditions). Bacterial inocula were adjusted against the 0.5 McFarland turbidity standard, verified with a DEN-1 densitometer (Biosan). Reference strains were obtained from the American Type Culture Collection: Staphylococcus epidermidis ATCC 12228 and Pseudomonas aeruginosa ATCC 27853. Instruments of the ICTP-CSIC characterization services are calibrated periodically following the internal procedures of those services. Chemical nomenclature follows IUPAC recommendations and all magnitudes are expressed in SI units., 5. Environmental/experimental conditions: Synthesis: chlorination at 85 C for 3 h in DMF; reaction with 1-methylimidazole at 95 C for 24 h; click reaction at 40 C for 48 h in DMSO. Purification by dialysis and lyophilization or vacuum drying at 45 C. All samples were vacuum-dried before spectroscopic measurements. Antibacterial assays: 10 mg of sample in 10 mL of phosphate-buffered saline at a working concentration of about 1E5 CFU/mL, incubated at 37 C and 120 rpm for 24 h; plates incubated at 37 C for 24 h on 5% sheep blood Columbia agar, 6. Describe any quality-assurance procedures performed on the data: Antibacterial assays were performed in triplicate, with control experiments run in parallel using unmodified cellulose, the chlorinated intermediate and no material at all. A background spectrum was acquired before every FTIR measurement and all samples were vacuum-dried before analysis. NMR signal assignments were checked against literature values for analogous cellulose derivatives. All data included in this dataset underwent peer review as part of the four publications listed above., Grant PID2021-123553OA-I00 ("Generation of antimicrobial all-biobased electroactive polymers for biomedical applications", acronym BE-ACTIVE), funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU "A way of making Europe". Principal Investigator: Coro Echeverria (ICTP-CSIC). Part of the data in folders 01 and 03 was also supported by grants PID2019-104600RB-I00 and PID2022-136516OB-I00 (MICIU/AEI and ERDF), as acknowledged in the corresponding publications., Each top-level folder contains the data underlying one publication: 01 - Chiloeches, A.; Zagora, J.; Placha, D.; Torres, M. D. T.; de la Fuente-Nunez, C.;Lopez-Fabal, F.; Gil-Romero, Y.; Fernandez-Garcia, R.; Fernandez-Garcia, M.; Echeverria, C.;Munoz-Bonilla, A. "Synergistic combination of antimicrobial peptides and cationic polyitaconates in multifunctional PLA fibers". ACS Applied Bio Materials 6(11), 4805-4813 (2023). https://doi.org/10.1021/acsabm.3c00576; 02 - Echeverria, C.; Arnaldos-Perez, I.; Barranco, R.; Munoz-Bonilla, A.; Fernandez-Garcia, M. "Synthesis and characterization of cellulose derivatives for enhanced antimicrobial activity". Cellulose 31, 1729-1740 (2024). https://doi.org/10.1007/s10570-023-05655-1; 03 - Barranco-Garcia, R.; Munoz-Bonilla, A.; Cerrada, M. L.; Echeverria, C.; Fernandez-Garcia, M. "Phase transitions in mixtures based on poly(lactic acid) and two polymeric nucleantes processed under a fast or slow cooling from the melt". Journal of Thermal Analysis and Calorimetry 149, 6051-6062 (2024). https://doi.org/10.1007/s10973-024-13188-3; 04 - Echeverria, C.; Ayensa, N.; Barranco-Garcia, R.; Munoz-Bonilla, A.; Fernandez-Garcia, M. "Enhanced antimicrobial activity of cellulose nanocrystals with added triazole and imidazolium groups". Cellulose (2026). https://doi.org/10.1007/s10570-026-07162-5., Peer reviewed