Pasar al contenido principal

FUNCIONALIZACION DE SILICES MESOPOROSAS PARA LA OPTIMIZACION DE LAS PRESTACIONES FINALES EN (NANO)COMPUESTOS POLIMERICOS

BES-2017-082284

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Contratos Predoctorales
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of Content in D Isomer and Incorporation of SBA-15 Silica on the Crystallization Ability and Mechanical Properties in PLLA Based Materials

  • Díez-Rodríguez, Tamara M.
  • Blázquez-Blázquez, Enrique
  • Pérez, Ernesto
  • Cerrada, María L.
Two L-rich polylactides (PLLA) with distinct contents in D isomer and their composites with an intermediate amount of mesoporous Santa Barbara Amorphous-15 (SBA-15) (about 9 wt.%) particles were attained by melt extrusion for the evaluation of the effect of content in D isomer and incorporation of mesoporous silica on the structural PLLA features and on their ultimate mechanical performance. For that, samples have been crystallized under dynamic and isothermal tests (from the melt and from the glassy states). The results from DSC and X-ray diffraction show obtainment of the pure α’ and α modifications at different intervals of crystallization temperature depending on the D steroisomer amount of the PLLA used. Furthermore, several phase transitions are observed depending on the crystallinity reached and the polymorphs developed during the isothermal crystallization from the glass: an additional cold crystallization, the α’/α transformation and the subsequent melting process, appearing all of them at temperatures clearly dependent on the D content. Rigidity, measured through microhardness in amorphous samples, is also affected by the D isomer and the presence of SBA-15 particles. Reinforcement effect of mesoporous silica is relatively more important in the matrix with the highest D content., This work was supported by the Agencia Estatal de Investigación (AEI, Spain) (PID2020-114930GB-I00 project) and ALBA Synchrotron Light Facility. Authors thank the funding. TMDR is also thankful for her pre-doctoral funding (contract number BES-2017-082284)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biocidal mesoporous SBA-15 particles decorated with Ag nanowires: Nucleant role in PLLA crystallization and antimicrobial transfer of their activity to the resultant biobased PLLA-SBA15@Ag composites

  • Díez-Rodríguez, Tamara M.
  • Blázquez-Blázquez, Enrique
  • Fernández-García, Marta
  • Muñoz-Bonilla, Alexandra
  • Pérez, Ernesto
  • Cerrada, María L.
Different composites based on an L-rich poly(lactic acid) (PLLA) and mesoporous SBA-15 functionalized with silver (SBA-15@Ag) are prepared by a solvent casting protocol, and subsequently processed as films by compression molding. Characterization of hybrid SBA-15@Ag particles shows that Ag is mainly incorporated as nanowires within the nanometric silica channels, and is able to provide its antimicrobial character to these hybrid particles. PLLA crystallinity, crystallization ability and the polymorphs able to be developed are strongly dependent on cooling rate and in less extent on silica content. These hybrid particles exert an important nucleating and reinforcing effect in the resultant composites. They also show very interesting and remarkable antimicrobial features, which are transferred to the PLLA composites. The most important antimicrobial activity is found against P. aeruginosa, E. coli and C. parapsilosis, Gram negative bacteria and yeast, respectively., Grants PID2020-114930 GB-I00 and PID2019-104600RB-I00 were funded by MCIN/AEI/10.13039/501100011033. Authors acknowledge this support together with that received from ALBA Synchrotron Light Facility. Grant BES-2017-082284 was also funded by MCIN/AEI/ 10.13039/501100011033 and, thus, TMDR is also thankful for her predoctoral funding. The synchrotron experiments were carried out in the beamline BL11-NCD-SWEET at ALBA Synchrotron Light Facility with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combined Effects from Dual Incorporation of ATBC as Plasticizer and Mesoporous MCM-41 as Nucleating Agent on the PLA Isothermal Crystallization in Environmentally-Friendly Ternary Composite Systems

  • Blázquez-Blázquez, Enrique
  • Barranco-García, Rosa
  • Díez-Rodríguez, Tamara M.
  • Cerrada, María L.
  • Pérez, Ernesto
Different materials, based on an L-rich polylactide (PLA) as matrix, acetyl tri-n-butyl citrate (ATBC) as plasticizer, and mesoporous Mobile Crystalline Material.41 (MCM-41) particles as nucleating agent, were attained by melt extrusion. These materials are constituted by (a) binary blends of PLA and ATBC with different contents of the latest; (b) a dual compound of PLA and a given amount of MCM-41 silica (5 wt.%); and (c) ternary composites that include PLA, ATBC at several compositions and mesoporous MCM-41 at 5 wt.%. Influence of the incorporation of the plasticizer and nucleating particles has been comprehensively analyzed on the different phase transitions: glass transition, cold crystallization, melt crystallization and melting processes. Presence of both additives moves down the temperature at which PLA phase transitions take place, while allowing the PLA crystallization from the melt at 10 °C/min in the composites. This tridimensional ordering is not noticeable in the pristine PLA matrix and, accordingly, PLA crystallization rate is considerably increased under dynamic conditions and also after isothermal crystallization from either the melt or the glassy state. An important synergistic effect of dual action of ATBC and MCM-41 has been, therefore, found., This research was funded by MCIN/AEI/10.13039/501100011033, grant number PID2020-114930GB-I00. Grant BES-2017-082284 was also funded by MCIN/AEI/10.13039/501100011033 and, thus, TMDR is also thankful for this pre-doctoral funding, Peer reviewed