Pasar al contenido principal

POLIMEROS MECANICAMENTE ENLAZADOS CON NANOTUBOS DE CARBONO PARA ELECTRODOS DE BATERIAS

PID2020-116661RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACION IMDEA NANOCIENCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Pathogen Sensing Device Based on 2D MOS2/Graphene Heterostructure

  • Enebral-Romero, Estefanía
  • Gutiérrez-Gálvez, Laura
  • Del Caño, Rafael
  • Vázquez Sulleiro, Manuel
  • Naranjo, Alicia
  • Gómez Pérez, Inmaculada Jénnifer
  • Pariente, Félix
  • Pérez, Emilio M.
  • García Mendiola, Tania
  • Lorenzo Abad, Encarnación
[Abstract] In this work we propose a new methodology for selective and sensitive pathogen detection based on a 2D layered heterostructured biosensing platform. As a proof of concept, we have chosen SARS-CoV-2 virus because the availability of new methods to detect this virus is still a great deal of interest. The prepared platform is based on the covalent immobilization of molybdenum disulphide functionalized with a diazonium salt (f-MoS2) onto graphene screen-printed electrodes (GPH SPE) by electrografting of the diazonium salt. This chemistry-based method generates an improved heterostructured biosensing platform for aptamer immobilization and aptasensor development. Electrochemical impedance spectroscopy (EIS) is used to obtain the signal response of the device, proving the ability of the sensor platform to detect the virus. SARS-CoV-2 spike RBD recombinant protein (SARS-CoV-2 S1 protein) has been detected and quantified with a low detection limit of 2.10 fg/mL. The selectivity of the developed biosensor has been confirmed after detecting the S1 protein even in presence of other interfering proteins. Moreover, the ability of the device to detect SARS-CoV-2 S1 protein has been also tested in nasopharyngeal swab samples., This work has been financially supported by the Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, PID2020-116661RB-I00, CTQ2015-71955-REDT (ELECTROBIONET)) and Community of Madrid (TRANSNANOAVANSENS, S2018/NMT-4349, and PhotoArt P2018/NMT-4367). E. Enebral thank the financial support of “Nanotecnología para detección del SARS-CoV-2 y sus variantes. NANOCOV” project. IMDEA Nanociencia receives support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (MINECO, Grant CEX2020-001039-S). We also thank the Spanish Ministry of Universities for supporting Laura Gutiérrez-Gálvez with the Formación del Profesorado Universitario (FPU) grant (FPU19/06309)., Comunidad de Madrid; S2018/NMT-4349, Comunidad de Madrid; P2018/NMT-4367
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

MOS2-Carbon Nanodots as a New Electrochemiluminescence Platform for Breast Cancer Biomarker Detection

  • Gutiérrez-Gálvez, Laura
  • Vázquez Sulleiro, Manuel
  • Gutiérrez-Sánchez, Cristina
  • García-Nieto, Daniel
  • Luna, Mónica
  • Pérez, Emilio M.
  • García-Mendiola, Tania
  • Lorenzo Abad, Encarnación
[Abstract] In this work, we present the combination of two different types of nanomaterials, 2D molybdenum disulfide nanosheets (MoS2-NS) and zero-dimensional carbon nanodots (CDs), for the development of a new electrochemiluminescence (ECL) platform for the early detection and quantification of the biomarker human epidermal growth factor receptor 2 (HER2), whose overexpression is associated with breast cancer. MoS2-NS are used as an immobilization platform for the thiolated aptamer, which can recognize the HER2 epitope peptide with high affinity, and CDs act as coreactants of the anodic oxidation of the luminophore [Ru(bpy)3]2+. The HER2 biomarker is detected by changes in the ECL signal of the [Ru(bpy)3]2+/CD system, with a low detection limit of 1.84 fg/mL and a wide linear range. The proposed method has been successfully applied to detect the HER2 biomarker in human serum samples., This work has been financially supported by the Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, PID2020-116661RB-I00, CTQ2015-71955-REDT (ELECTROBIONET)), Community of Madrid (TRANSNANOAVANSENS, S2018/NMT-4349, and FotoArt (P2018/NMT-4367), project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). IMDEA Nanociencia receives support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (MINECO, Grant CEX2020-001039-S), Comunidad de Madrid; S2018/NMT-4349, Comunidad de Madrid; P2018/NMT-4367, Comunidad de Madrid; S2018/NMT-4291
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Direct Magnetic Evidence, Functionalization, and Low-Temperature Magneto-Electron Transport in Liquid-Phase Exfoliated FEPS3

  • Martín-Pérez, Lucía
  • Medina Rivero, Samara
  • Vázquez Sulleiro, Manuel
  • Naranjo, Alicia
  • Gómez Pérez, Inmaculada Jénnifer
  • Ruíz-González, María Luisa
  • Castellanos-Gómez, Andrés
  • García-Hernández, Mar
  • Pérez, Emilio M.
  • Burzurí, Enrique
[Abstract] Magnetism and the existence of magnetic order in a material is determined by its dimensionality. In this regard, the recent emergence of magnetic layered van der Waals (vdW) materials provides a wide playground to explore the exotic magnetism arising in the two-dimensional (2D) limit. The magnetism of 2D flakes, especially antiferromagnetic ones, however, cannot be easily probed by conventional magnetometry techniques, being often replaced by indirect methods like Raman spectroscopy. Here, we make use of an alternative approach to provide direct magnetic evidence of few-layer vdW materials, including antiferromagnets. We take advantage of a surfactant-free, liquid-phase exfoliation (LPE) method to obtain thousands of few-layer FePS3 flakes that can be quenched in a solvent and measured in a conventional SQUID magnetometer. We show a direct magnetic evidence of the antiferromagnetic transition in FePS3 few-layer flakes, concomitant with a clear reduction of the Néel temperature with the flake thickness, in contrast with previous Raman reports. The quality of the LPE FePS3 flakes allows the study of electron transport down to cryogenic temperatures. The significant through-flake conductance is sensitive to the antiferromagnetic order transition. Besides, an additional rich spectra of electron transport excitations, including secondary magnetic transitions and potentially magnon-phonon hybrid states, appear at low temperatures. Finally, we show that the LPE is additionally a good starting point for the mass covalent functionalization of 2D magnetic materials with functional molecules. This technique is extensible to any vdW magnetic family., E.B. acknowledges funds from Ministerio de Ciencia e Innovación in Spain (RTI2018-096075-A-C22, RYC2019-028429-I). E.M.P. thanks the Spanish Ministerio de Ciencia e Innovación (PID2020-116661RB-I00) and Comunidad de Madrid (P2018/NMT-4367). M.G.H. and A.C.-G. acknowledge funds from European Union Horizon 2020 research and innovation program (Graphene Core3-Grant agreement no. 881603 Graphene-based disruptive technologies), EU FLAG-ERA through the project To2Dox (JTC-2019-009), and Comunidad de Madrid through the project CAIRO-CM project (Y2020/NMT-6661). A.C.-G. also acknowledges funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 755655, ERC-StG 2017 project 2D-TOPSENSE) and the Ministry of Science and Innovation (Spain) through the project PID2020-115566RB-I00. M.L.R.G. acknowledges support by the Spanish Ministry of Science and Innovation through Research Project PID 2020-113753RB-100. The National Centre for Electron Microscopy (ELECMI National Singular Scientific Facility) is also acknowledge for provision of access to corrected aberration microscopy facilities. CzechNanoLab Research Infrastructure supported by MEYS CR (LM2018110) is acknowledged, Comunidad de Madrid; P2018/NMT-4367, Comunidad de Madrid; Y2020/NMT-6661, República checa. Ministerstvo školství, mládeže a tělovýchovy České republiky; LM2018110
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publicación Artículo científico (JournalArticle)

Microwave-Driven Exfoliation of Bulk 2H-MoS2 after Acetonitrile Prewetting Produces Large-Area Ultrathin Flakes with Exceptionally High Yield

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct Magnetic Evidence, Functionalization, and Low-Temperature Magneto-Electron Transport in Liquid-Phase Exfoliated FePS3

  • Martín-Pérez, Lucía
  • Medina Rivero, Samara
  • Vázquez Sulleiro, Manuel
  • Naranjo, Alicia
  • Gómez, I. Jénnifer
  • Ruíz-González, María Luisa
  • Castellanos-Gómez, Andrés
[EN] Magnetism and the existence of magnetic order in a material is determined by its dimensionality. In this regard, the recent emergence of magnetic layered van der Waals (vdW) materials provides a wide playground to explore the exotic magnetism arising in the two-dimensional (2D) limit. The magnetism of 2D flakes, especially antiferromagnetic ones, however, cannot be easily probed by conventional magnetometry techniques, being often replaced by indirect methods like Raman spectroscopy. Here, we make use of an alternative approach to provide direct magnetic evidence of few-layer vdW materials, including antiferromagnets. We take advantage of a surfactant-free, liquid-phase exfoliation (LPE) method to obtain thousands of few-layer FePS3 flakes that can be quenched in a solvent and measured in a conventional SQUID magnetometer. We show a direct magnetic evidence of the antiferromagnetic transition in FePS3 few-layer flakes, concomitant with a clear reduction of the Néel temperature with the flake thickness, in contrast with previous Raman reports. The quality of the LPE FePS3 flakes allows the study of electron transport down to cryogenic temperatures. The significant through-flake conductance is sensitive to the antiferromagnetic order transition. Besides, an additional rich spectra of electron transport excitations, including secondary magnetic transitions and potentially magnon-phonon hybrid states, appear at low temperatures. Finally, we show that the LPE is additionally a good starting point for the mass covalent functionalization of 2D magnetic materials with functional molecules. This technique is extensible to any vdW magnetic family., Funds from Ministerio de Ciencia e Innovación in Spain (RTI2018-096075-A-C22, RYC2019-028429-I). E.M.P. thanks the Spanish Ministerio de Ciencia e Innovación (PID2020-116661RB-I00) and Comunidad de Madrid (P2018/NMT-4367). M.G.H. and A.C.-G. acknowledge funds from European Union Horizon 2020 research and innovation program (Graphene Core3-Grant agreement no. 881603 Graphene-based disruptive technologies), EU FLAGACS ERA through the project To2Dox (JTC-2019-009), andComunidad de Madrid through the project CAIRO-CMproject (Y2020/NMT-6661). A.C.-G. also acknowledges funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 755655, ERC-StG 2017 project 2D-TOPSENSE) and the Ministry of Science and Innovation (Spain) through the project PID2020-115566RB-I00. M.L.R.G. acknowledges support by the Spanish Ministry of Science and Innovation through Research Project PID 2020- 113753RB-100. The National Centre for Electron Microscopy (ELECMI National Singular Scientific Facility) is also acknowledge for provision of access to corrected aberration microscopy facilities. CzechNanoLab Research Infrastructure supported by MEYS CR (LM2018110) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MoS2-Carbon nanodots as a new electrochemiluminescence platform for breast cancer biomarker detection

  • Gutiérrez-Gálvez, Laura
  • Vázquez Sulleiro, Manuel
  • Gutiérrez-Sánchez, Cristina
  • García-Nieto, Daniel
  • Luna, Mónica
  • Pérez, Emilio M.
  • García-Mendiola, Tania
  • Lorenzo, Encarnación
In this work, we present the combination of two different types of nanomaterials, 2D molybdenum disulfide nanosheets (MoS2-NS) and zero-dimensional carbon nanodots (CDs), for the development of a new electrochemiluminescence (ECL) platform for the early detection and quantification of the biomarker human epidermal growth factor receptor 2 (HER2), whose overexpression is associated with breast cancer. MoS2-NS are used as an immobilization platform for the thiolated aptamer, which can recognize the HER2 epitope peptide with high affinity, and CDs act as coreactants of the anodic oxidation of the luminophore [Ru(bpy)3]2+. The HER2 biomarker is detected by changes in the ECL signal of the [Ru(bpy)3]2+/CD system, with a low detection limit of 1.84 fg/mL and a wide linear range. The proposed method has been successfully applied to detect the HER2 biomarker in human serum samples., This work has been financially supported by the Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, PID2020-116661RB-I00, CTQ2015-71955-REDT (ELECTROBIONET)), Community of Madrid (TRANSNANOAVANSENS, S2018/NMT-4349, and FotoArt (P2018/NMT-4367), project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). IMDEA Nanociencia receives support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (MINECO, Grant CEX2020-001039-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (referencia del instituto). Por ejemplo: With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2020-001039-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microwave-Driven Exfoliation of Bulk 2H-MoS2 after Acetonitrile Prewetting Produces Large-Area Ultrathin Flakes with Exceptionally High Yield

  • Quirós‐Ovies, Ramiro
  • Laborda, María
  • Martín Sabanés, Natalia
  • Martín-Pérez, Lucía
  • Moreno-Da Silva, Sara
  • Burzurí, Enrique
  • Sebastián, Víctor
  • Pérez, Emilio M.
  • Santamaría, Jesús
2D materials display exciting properties in numerous fields, but the development of applications is hindered by the low yields, high processing times, and impaired quality of current exfoliation methods. In this work we have used the excellent MW absorption properties of MoS2 to induce a fast heating that produces the near-instantaneous evaporation of an adsorbed, low boiling point solvent. The sudden evaporation creates an internal pressure that separates the MoS2 layers with high efficiency, and these are kept separated by the action of the dispersion solvent. Our fast method (90 s) gives high yields (47% at 0.2 mg/mL, 35% at 1 mg/mL) of highly exfoliated material (90% under 4 layers), large area (up to several μm2), and excellent quality (no significant MoO3 detected)., The authors acknowledge European Research Council (ERC-PoC-842606 (E.M.P.)); ERC-AdG-742684 (J. S.), MINECO (CTQ2017-86060-P and PID2020-116661RB-I00(E.M.P.)), MINECO (PID2021-127847OB-I00 (V.S.)), the Comunidad de Madrid (MAD2D-CM S2013/MIT-3007 (E.M.P.). IMDEA Nanociencia acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (MINECO, grant no. SEV-2016-0686). We also thank CIBER-BBN, an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III and by Fondo Europeo de Desarrollo Regional (Feder) “Una manera de hacer Europa”, with the assistance of the European Regional Development Fund. LMA-ELECMI and NANBIOSIS ICTs are gratefully acknowledged. N.M.S. acknowledges the MSCA program MSCA-IF-2019-892667. Finally, authors acknowledge Roberta Manno for her assistance in the microwave experiments and data analysis., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multiplex Portable Biosensor for Bacteria Detection

  • Kaci, Karim
  • Enebral-Romero, Estefanía
  • Martínez-Periñán, Emiliano
  • Garrido, Marina
  • Pérez, Emilio M.
  • López-Diego, David
  • Luna, Mónica
  • González de Rivera, Guillermo
  • García-Mendiola, Tania
  • Lorenzo, Encarnación
An advanced, cost-effective, and portable DNA biosensor capable of detecting multiple bacteria simultaneously has been developed. The biosensor comprises a fast and inexpensive potentiostat that controls the applied potential to a screen-printed electrochemical array platform functionalized with MoS2 flakes and bacterial DNA probes. The current response obtained by à la carte thionine functionalized carbon nanodots (Ty-CDs) is monitored as an electrochemical indicator of the hybridization event. The design of the potentiostat prioritizes achieving an optimal signal-to-noise ratio and incorporates a user-friendly interface compatible with various devices, including computers, mobile phones, and tablets. The device is compact, lightweight, and manufactured at a low cost. The key components of the potentiostat include a data acquisition board capable of analyzing multiple samples simultaneously and a controller board. The results of this study confirm the ability of the multiplex portable biosensor to successfully detect specific bacterial DNA sequences, demonstrating its reliability and superior performance compared with a traditional, more complex, and laboratory-oriented potentiostat., This work has been financially supported by the Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, PID2020-116661RB-I00), Spanish Ministry of Science, Innovation, and Universities (Red de “Sensores y Biosensores Electroquímicos: retos ante la transformación digital e industrial” RED2022-134120-T). Estefanía Enebral-Romero received contract financial support as a predoctoral researcher funded by grant CEX2020-001039-S, supported by CIN/AEI/10.13039/501100011033. This work have also been funded by CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). Comunidad de Madrid (P2018/NMT-4367, and MAD2D-CM)-UCM” project funded by Comunidad de Madrid, by the Recovery, Transformation and Resilience Plan, and by NextGenerationEU from the European Union. IMDEA Nanociencia receives support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (MINECO, Grant CEX2020-001039-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2020-001039-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rapid and simple viral protein detection by functionalized 2D MoS2/graphene electrochemiluminescence aptasensor

  • Gutiérrez-Gálvez, Laura
  • El Hajioui-El Ghalbzouri, Hanaa
  • Enebral-Romero, Estefanía
  • Garrido, Marina
  • Naranjo, Alicia
  • López-Diego, David
  • Luna, Mónica
  • Pérez, Emilio M.
  • García-Mendiola, Tania
  • Lorenzo, Encarnación
In this work we present the development of an electrochemiluminescence aptasensor based on electrografting molybdenum disulphide nanosheets functionalized with diazonium salt (MoS2-N2+) upon screen-printed electrodes of graphene (SPEs GPH) for viral proteins detection. In brief, this aptasensor consists of SPEs GPH electrografted with MoS2-N2+ and modified with a thiolated aptamer, which can specifically recognize the target protein analyte. In this case, we have used SARS-CoV-2 spike protein as model protein. Electrochemiluminescence detection was performed by using the [Ru(bpy)3]2+/TPRA (tripropylamine) system, which allows the specific detection of the SARS-CoV-2 spike protein easily and rapidly with a detection limit of 9.74 fg/mL and a linear range from 32.5 fg/mL to 50.0 pg/mL. Moreover, the applicability of the aptasensor has been confirmed by the detection of the protein directly in human saliva samples. Comparing our device with a traditional saliva antigen test, our aptasensor can detect the spike protein even when the saliva antigen test gives a negative result., This work has been financially supported by the Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, RED2022-134120-T) and Community of Madrid (TRANSNANOAVANSENS (S2018/NMT-4349) and FotoArt (P2018/NMT-4367)). E.M.P. acknowledges funding from the Ministerio de Ciencia, Innovación y Universidades (PID2020-116661RB-I00), and Comunidad de Madrid “Materiales Disruptivos Bidimensionales (2D)” (MAD2D-CM)-UAM and (MAD2D-CM)-IMDEA-NC funded by the Recovery, Transformation and Resilience Plan, and by NextGenerationEU from the European Union. IMDEA Nanoscience acknowledges support from the ‘‘Severo Ochoa’’ Programme for Centres of Excellence in R&D CEX2020-001039-S. We also acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Free PCR virus detection via few-layer bismuthene and tetrahedral DNA nanostructured assemblies

  • Gutiérrez-Gálvez, Laura
  • García-Fernández, Daniel
  • Barrio Redondo, Melisa del
  • Luna, Mónica
  • Torres, Íñigo
  • Zamora, Félix
  • Navío, Cristina
  • Milán-Rois, Paula
  • Castellanos, Milagros
  • Abreu, Melanie
  • Cantón, Rafael
  • Galán, Juan Carlos
  • Somoza, Álvaro
  • Miranda, Rodolfo
  • García-Mendiola, Tania
  • Lorenzo, Encarnación
In this work we describe a highly sensitive method based on a biocatalyzed electrochemiluminescence approach. The system combines, for the first time, the use of few-layer bismuthene (FLB) as a platform for the oriented immobilization of tetrahedral DNA nanostructures (TDNs) specifically designed and synthetized to detect a specific SARS-CoV-2 gene sequence. In one of its vertices, these TDNs contain a DNA capture probe of the open reading frame 1 ab (ORF1ab) of the virus, available for the biorecognition of the target DNA/RNA. At the other three vertices, there are thiol groups that enable the stable anchoring/binding to the FLB surface. This novel geometry/approach enables not only the binding of the TDNs to surfaces, but also the orientation of the capture probe in a direction normal to the bismuthine surface so that it is readily accessible for binding/recognition of the specific SARS-CoV-2 sequence. The analytical signal is based on the anodic electrochemiluminescence (ECL) intensity of luminol which, in turn, arises as a result of the reaction with H2O2, generated by the enzymatic reaction of glucose oxidation, catalyzed by the biocatalytic label avidin-glucose oxidase conjugate (Av-GOx), which acts as co-reactant in the electrochemiluminescent reaction. The method exhibits a limit of detection (LOD) of 4.31 aM and a wide linear range from 14.4 aM to 1.00 μM, and its applicability was confirmed by detecting SARS-CoV-2 in nasopharyngeal samples from COVID-19 patients without the need of any amplification process., This work has been financially supported by the Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, PID2020-116661RB-I00, PID2020-119352RB-I00, PDC2021-120782-C21, PID2022-138908NB-C31, CTQ2015-71955-REDT (ELECTROBIONET)) and Community of Madrid (REACT-UE NANOCOV-CM, TRANSNANOAVANSENS, S2018/NMT-4349). We acknowledge the support from the “(MAD2D-CM)-UAM” project funded by Comunidad de Madrid, by the Recovery, Transformation and Resilience Plan, and by NextGenerationEU from the European Union. Laura Gutiérrez-Gálvez was supported by a Formación del Profesorado Universitario (FPU) grant from the Spanish Ministry of Universities (FPU19/06309). Daniel García-Fernández was supported by a Programa Investigo grant from Autonomous Community of Madrid in the framework of the Plan de Recuperación, Transformación y Resiliencia financed by the European Union – NextGenerationEU (09-PIN1-00013.4/2022-Puesto 83). The authors acknowledge the support of the European Union (EU) and Horizon 2020 through Instruct Proposal PID: 21859, and the CRIOMECORR project (ESFRI-2019-01-CSIC-16) to the cryoEM CNB-CSIC facility. We also acknowledge María U. González help with Fluorescence Microscopy and the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). IMDEA Nanociencia acknowledges support from the ‘Severo Ochoa’Programme for Centres of Excellence in R&D (MINECO, CEX2020-001039-S). Paula Milán-Rois thanks the Spanish Science and Innovation Ministry (BES-2017-082521) for the PhD fellowship. The authors also want to thank Marta Failde, Álvaro Villamayor, and Mario Mencía from the Department of Molecular Biology of UAM for their technical help with DNA analysis., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Real-Time Imaging of the Mechanobactericidal Action of Colloidal Nanomaterials and Nanostructured Topographies

  • Viela, Felipe
  • Ortega, Ingrid V.
  • Hernández, Jaime J.
  • Rodríguez, Isabel
  • Moreno-Da Silva, Sara
  • López-Moreno, Alejandro
  • Pérez, Emilio M.
  • Flors, Cristina
Mechanobactericidal nanomaterials, such as low-dimensional nanoparticles in suspension or high-aspect-ratio nanofabricated topographies, rely on their mechanical or physical interactions with bacteria and are promising antimicrobial strategies that overcome bacterial resistance to classical antibiotics. However, the underlying killing mechanisms are poorly understood, given the challenges associated with the real-time characterization of the mechanical interaction in a biologically relevant environment. Indeed, different death mechanisms have been proposed depending on the magnitude of the interaction forces. Herein, the real-time and single-cell response of bacteria to weak mechanical interactions with nanostructured topographies and “nanodarts,” exemplified by flowing single-walled carbon nanotubes, is investigated. To that end, an advanced reporting strategy is used to follow sublethal physiological effects on bacteria upon contact with these materials. With this method, it is estimated that the contact time at which the initial stages of bacterial death occur is in the order of a few tens of minutes. This information contributes to a full understanding of the complex mechanisms of mechanically induced bacterial death., F.V. and I.V.O. contributed equally to this work. This work was supported by Spanish Ministerio de Ciencia e Innovación (PID2021-122231NB-I00, PRE2018-084983, PDC2021-121515-I00, PID2020-116661RB-I00, and CEX2020-001039-S), Comunidad de Madrid (P2018/NMT-4367), and the IDEAL Postdoctoral Fellowship Program (Agreement Number 101034431—IDEAL—H2020-MSCA-COFUND-2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Continuous exfoliation of 2H-MoS2 in a microwave-heated microfluidic contactor

  • Quirós‐Ovies, Ramiro
  • Martín Sabanés, Natalia
  • García-Pérez, Cristina
  • Bernardo-Gavito, Ramón
  • Granados, Daniel
  • Pérez, Emilio M.
  • Santamaría, Jesús
  • Sebastián, Víctor
Microwave (MW)-assisted exfoliation of molybdenum disulfide (MoS2) has been demonstrated to produce exceptionally large area (in the µm2 range), ultrathin (< 4 layers) flakes operating in the batch mode. Here, we develop a continuous system capable of producing few-layer MoS2 flakes of similar quality to those obtained through the batch procedure but with enhanced efficiency and scalability. The proposed microfluidic-based method introduces a controlled, stable, and reproducible process for exfoliating MoS2 in a liquid medium. By optimizing parameters such as flow rate, channel geometry, power of the MW heating and solvent selection, we were able to consistently achieve flake sizes in the µm range and thicknesses below 6 nm, comparable to those obtained via batch MW exfoliation. The continuous nature of the system allows for scalable production, addressing one of the major limitations of batch processes. While developed for MoS2 flakes, it can be translated to any two-dimensional (2D) material with suitable microwave-absorbing properties, potentially paving the way for the continuous production of a wide variety of large-area ultrathin flakes., The authors acknowledge MINECO (CTQ2017-86060-P and PID2020-116661RB-I00(E.M.P.)), 2021-127847OB-I00 MCIN/AEI/10.13039/ 501100011033 and PDC2022-133866-I00 MCIN/AEI/10.13039/501100011033 (Unión Europea Next GenerationEU/PRTR), the Comunidad de Madrid (MAD2D-CM PRTR-CM PR47/21 (E.M.P.). INMA and IMDEA Nanociencia acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D “Ayuda CEX2023-001286-S financiada por MICIU/AEI /10.13039/501100011033” and (CEX2020-001039-S), respectively. We also thank CIBER-BBN, an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III and by Fondo Europeo de Desarrollo Regional (Feder) “Una manera de hacer Europa”, with the assistance of the European Regional Development Fund. LMA-ELECMI and NANBIOSIS ICTs are gratefully acknowledged., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MoS₂-DNA tetrahedral bioconjugate for high-performance DNA biosensors: application in viral infection diagnostics

  • Enebral-Romero, Estefanía
  • Martínez-Periñán, Emiliano
  • López-Diego, David
  • Luna, Mónica
  • Garrido, Marina
  • Navío, Cristina
  • Pérez, Emilio M.
  • Lorenzo, Encarnación
  • García-Mendiola, Tania
An electrochemical DNA biosensor is presented for early viral infection detection, integrating molybdenum disulphide (MoS₂), tetrahedral DNA nanostructures (TDNs), and thionine-modified carbon nanodots (CNDsTy). The innovation of this work lies in the first-time integration of these nanomaterials for the preparation of a bioconjugate, whose synergy enables the biosensor's functionality. MoS₂ anchors the TDNs, which carry the capture probe for virus identification via genetic code recognition. CNDsTy allow the electrochemical detection based on their different affinity for single-stranded (ssDNA) and double-stranded DNA (dsDNA), enabling hybridization event identification. The biosensor achieves high sensitivity (detection limit of 5.00 fM) and can distinguish viral loads, validated with the SARS-CoV-2 ORF1ab sequence in human nasopharyngeal samples., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. The research leading to these results received funding from Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, RED2022-134120-T, and PID2023-150844OB-I00), Community of Madrid (REACT-UE NANOCOV-CM, (MAD2D-CM)-IMDEA and S2018/NMT-4291 TEC2SPACE), Spanish Ministry of Science, Innovation and Universities (TED2021-129738B-I00, PID2020-116661RB-I00, and CEX2020-001039-S), the Recovery, Transformation and Resilience Plan, the European Union (NextGenerationEU and FEDER, FSE), and by MINECO (CSIC13-4E-1794)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Microwave-driven exfoliation of bulk 2H-MoS[sub]2 after acetonitrile prewetting produces large-area ultrathin flakes with exceptionally high yield

  • Quirós-Ovies, R.
  • Laborda, M.
  • Martín Sabanés, N.
  • Martín-Pérez, L.
  • Moreno Da-Silva, S.
  • Burzurí, E.
  • Sebastian, V.
  • Pérez, E. M.
  • Santamaría, J.
2D materials display exciting properties in numerous fields, but the development of applications is hindered by the low yields, high processing times, and impaired quality of current exfoliation methods. In this work we have used the excellent MW absorption properties of MoS2 to induce a fast heating that produces the near-instantaneous evaporation of an adsorbed, low boiling point solvent. The sudden evaporation creates an internal pressure that separates the MoS2 layers with high efficiency, and these are kept separated by the action of the dispersion solvent. Our fast method (90 s) gives high yields (47% at 0.2 mg/mL, 35% at 1 mg/mL) of highly exfoliated material (90% under 4 layers), large area (up to several μm2), and excellent quality (no significant MoO3 detected).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Continuous exfoliation of 2H-MoS2 in a microwave-heated microfluidic contactor

  • Quirós-Ovies, Ramiro
  • Sabanés, Natalia Martín
  • García-Pérez, Cristina
  • Bernardo-Gavito, Ramón
  • Granados, Daniel
  • Pérez, Emilio M.
  • Santamaría, Jesús
  • Sebastian, Víctor
Microwave (MW)-assisted exfoliation of molybdenum disulfide (MoS2) has been demonstrated to produce exceptionally large area (in the µm2 range), ultrathin (< 4 layers) flakes operating in the batch mode. Here, we develop a continuous system capable of producing few-layer MoS2 flakes of similar quality to those obtained through the batch procedure but with enhanced efficiency and scalability. The proposed microfluidic-based method introduces a controlled, stable, and reproducible process for exfoliating MoS2 in a liquid medium. By optimizing parameters such as flow rate, channel geometry, power of the MW heating and solvent selection, we were able to consistently achieve flake sizes in the µm range and thicknesses below 6 nm, comparable to those obtained via batch MW exfoliation. The continuous nature of the system allows for scalable production, addressing one of the major limitations of batch processes. While developed for MoS2 flakes, it can be translated to any two-dimensional (2D) material with suitable microwave-absorbing properties, potentially paving the way for the continuous production of a wide variety of large-area ultrathin flakes.