Pasar al contenido principal

DISEÑO DE MATERIALES 2D PARA APLICACIONES EN ENERGIA II: DISEÑO Y PROCESABILIDAD

PID2022-138908NB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD AUTONOMA DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Free PCR virus detection via few-layer bismuthene and tetrahedral DNA nanostructured assemblies

  • Gutiérrez-Gálvez, Laura
  • García-Fernández, Daniel
  • Barrio Redondo, Melisa del
  • Luna, Mónica
  • Torres, Íñigo
  • Zamora, Félix
  • Navío, Cristina
  • Milán-Rois, Paula
  • Castellanos, Milagros
  • Abreu, Melanie
  • Cantón, Rafael
  • Galán, Juan Carlos
  • Somoza, Álvaro
  • Miranda, Rodolfo
  • García-Mendiola, Tania
  • Lorenzo, Encarnación
In this work we describe a highly sensitive method based on a biocatalyzed electrochemiluminescence approach. The system combines, for the first time, the use of few-layer bismuthene (FLB) as a platform for the oriented immobilization of tetrahedral DNA nanostructures (TDNs) specifically designed and synthetized to detect a specific SARS-CoV-2 gene sequence. In one of its vertices, these TDNs contain a DNA capture probe of the open reading frame 1 ab (ORF1ab) of the virus, available for the biorecognition of the target DNA/RNA. At the other three vertices, there are thiol groups that enable the stable anchoring/binding to the FLB surface. This novel geometry/approach enables not only the binding of the TDNs to surfaces, but also the orientation of the capture probe in a direction normal to the bismuthine surface so that it is readily accessible for binding/recognition of the specific SARS-CoV-2 sequence. The analytical signal is based on the anodic electrochemiluminescence (ECL) intensity of luminol which, in turn, arises as a result of the reaction with H2O2, generated by the enzymatic reaction of glucose oxidation, catalyzed by the biocatalytic label avidin-glucose oxidase conjugate (Av-GOx), which acts as co-reactant in the electrochemiluminescent reaction. The method exhibits a limit of detection (LOD) of 4.31 aM and a wide linear range from 14.4 aM to 1.00 μM, and its applicability was confirmed by detecting SARS-CoV-2 in nasopharyngeal samples from COVID-19 patients without the need of any amplification process., This work has been financially supported by the Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, PID2020-116661RB-I00, PID2020-119352RB-I00, PDC2021-120782-C21, PID2022-138908NB-C31, CTQ2015-71955-REDT (ELECTROBIONET)) and Community of Madrid (REACT-UE NANOCOV-CM, TRANSNANOAVANSENS, S2018/NMT-4349). We acknowledge the support from the “(MAD2D-CM)-UAM” project funded by Comunidad de Madrid, by the Recovery, Transformation and Resilience Plan, and by NextGenerationEU from the European Union. Laura Gutiérrez-Gálvez was supported by a Formación del Profesorado Universitario (FPU) grant from the Spanish Ministry of Universities (FPU19/06309). Daniel García-Fernández was supported by a Programa Investigo grant from Autonomous Community of Madrid in the framework of the Plan de Recuperación, Transformación y Resiliencia financed by the European Union – NextGenerationEU (09-PIN1-00013.4/2022-Puesto 83). The authors acknowledge the support of the European Union (EU) and Horizon 2020 through Instruct Proposal PID: 21859, and the CRIOMECORR project (ESFRI-2019-01-CSIC-16) to the cryoEM CNB-CSIC facility. We also acknowledge María U. González help with Fluorescence Microscopy and the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). IMDEA Nanociencia acknowledges support from the ‘Severo Ochoa’Programme for Centres of Excellence in R&D (MINECO, CEX2020-001039-S). Paula Milán-Rois thanks the Spanish Science and Innovation Ministry (BES-2017-082521) for the PhD fellowship. The authors also want to thank Marta Failde, Álvaro Villamayor, and Mario Mencía from the Department of Molecular Biology of UAM for their technical help with DNA analysis., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bismuthene - Tetrahedral DNA nanobioconjugate for virus detection

  • Enebral-Romero, Estefanía
  • García-Fernández, Daniel
  • Gutiérrez-Gálvez, Laura
  • López-Diego, David
  • Luna, Mónica
  • García-Martín, Adrián
  • Salagre, Elena
  • Michel, Enrique G.
  • Torres, Íñigo
  • Zamora, Félix
  • García-Mendiola, Tania
  • Lorenzo, Encarnación
In this work, we present an electrochemical sensor for fast, low-cost, and easy detection of the SARS-CoV-2 spike protein in infected patients. The sensor is based on a selected combination of nanomaterials with a specific purpose. A bioconjugate formed by Few-layer bismuthene nanosheets (FLB) and tetrahedral DNA nanostructures (TDNs) is immobilized on Carbon Screen-Printed Electrodes (CSPE). The TDNs contain on the top vertex an aptamer that specifically binds to the SARS-CoV-2 spike protein, and a thiol group at the three basal vertices to anchor to the FLB. The TDNs are also marked with a redox indicator, Azure A (AA), which allows the direct detection of SARS-CoV-2 spike protein through changes in the current intensity of its electrolysis before and after the biorecognition reaction. The developed sensor can detect SARS-CoV-2 spike protein with a detection limit of 1.74 fg mL-1 directly in nasopharyngeal swab human samples. Therefore, this study offers a new strategy for rapid virus detection since it is versatile enough for different viruses and pathogens., This work has been financially supported by the Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, RED2022-134120-T), Spanish Ministry of Science, Innovation and Universities (TED2021-129738B–I00) and Community of Madrid (REACT-UE NANOCOV-CM, TRANSNANOAVANSENS, S2018/NMT-4349). Estefanía Enebral-Romero thanks the financial support of “Nanotecnología para detección del SARS-CoV-2 y sus variantes. NANOCOV” project and a contract as a predoctoral researcher funded by grant CEX2020-001039-S, supported by MCIN/AEI/10.13039/501100011033. Laura Gutiérrez-Gálvez was supported by a Formación del Profesorado Universitario (FPU) grant from the Spanish Ministry of Universities (FPU19/06309). Daniel García-Fernández and Adrián García-Martín were supported by a Programa Investigo grant from Autonomous Community of Madrid in the framework of the Plan de Recuperación, Transformación y Resiliencia financed by the European Union – NextGenerationEU (09-PIN1-00013.4/2022- 83rd and 66rd place, respectively). The authors acknowledge the support of the European Union (EU) and Horizon 2020 through Instruct Proposal PID: 21859, and the CRIOMECORR project (ESFRI-2019-01-CSIC-16) to the cryoEM CNB-CSIC facility. F. Z. acknowledges financial support from the Spanish Ministry of Science and Innovation, through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2023-001316-M, PDC2021-120782-C21, and PID2022-138908NB-C31), the “(MAD2D-CM)-UAM” project funded by Comunidad de Madrid, by the Recovery, Transformation and Resilience Plan, and by NextGenerationEU from the European Union. F.Z. also acknowledge support from the European Innovation Council under grant Agreement 101047081 (EVA). EGM acknowledges financial support from the Spanish Ministry of Science and Innovation, through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2018-000805-M) and through grant PID2021-123295NB-I00. We also acknowledge María U. González help with Fluorescence Microscopy and the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

β-Ketoenamine-linked covalent organic frameworks synthesized via gel-to-gel monomer exchange reaction: From aerogel monoliths to electrodes for supercapacitors

  • Martín-Illán, Jesús Á.
  • Sierra, Laura
  • Guillem-Navajas, Ana
  • Suárez, José Antonio
  • Royuela, Sergio
  • Rodríguez-San Miguel, David
  • Maspoch, Daniel
  • Ocón, Pilar
  • Zamora, Félix
Covalent organic frameworks (COFs) possess intrinsic nanoscale pores, limiting mass transport and impacting their utility in many applications, such as catalysis, supercapacitors, and gas storage, demanding efficient diffusion throughout the material. Hierarchical porous structures, integrating larger macropores with inherent micro-/meso-pores, facilitate rapid mass transport. Recently, the fabrication of aerogel monoliths is reported exclusively from imine-linked COFs, offering flexibility in aerogel composition. However, challenges in synthesizing robust β-ketoenamine-based COFs with comparable surface areas prompted innovative synthetic approaches. Leveraging the dynamic nature of COF bonds, in this work efficient monomer exchange from imine to partially β-ketoenamine-linked COFs within the gel phase is demonstrated. These aerogels can be transformed into electrodes using the compression technique. The new flexible electrodes-based β-ketoenamine-linked COF composites with C super P exhibit superior durability and redox activity. Through supercapacitor assembly, the β-ketoenamine-linked COF electrodes outperform their imine-based counterparts, showcasing enhanced capacitance (88 mF cm−2) and stability at high current densities (2.0 mA cm−2). These findings underscore the promise of β-ketoenamine-linked COFs for pseudocapacitor energy storage applications., This work was supported by the Spanish Ministry of Science and Innovation, through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2018-000805-M and CEX2023-001316-M), PDC2022-133498-I00, TED2021-129886B-C42, PID2019-106268GB-C32, PID2022-138908NB-C31, MAT2016-77608-C3-1-P, PCI2018-093081, PID2019-108028GB-C21, and RTI2018-095622-B-I00), and the Catalan AGAUR (project 2017 SGR 238). The authors acknowledge the support from the “(MAD2D-CM)-UAM” project funded by Comunidad de Madrid, the Recovery, Transformation, and Resilience Plan, and NextGenerationEU from the European Union. This work was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 was supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2018-000805-M)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001316-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advancing diagnostics with BODIPY-bismuthene DNA biosensors

  • Gutiérrez-Gálvez, Laura
  • Enebral-Romero, Estefanía
  • Valle Amores, Miguel Ángel
  • Pina Coronado, Clara
  • Torres, Iñigo
  • López-Diego, David
  • Luna, Mónica
  • Fraile, Alberto
  • Zamora, Félix
  • Alemán, José
  • Álvarez, Jesús
  • Capitán, M. J.
  • Lorenzo, Encarnación
  • García-Mendiola, Tania
In this work, an electrochemical biosensor is prepared based on few-layer bismuthene hexagons (FLBHs) and a water-soluble BODIPY (BDP) derivative (BDP-NaSO3) for early infection diagnosis. In particular, the detection in advance of a virus sequence in nasopharyngeal swab samples was developed. The combination of the FLBHs and BDP-NaSO3 facilitates the direct, sensitive, and specific detection of gene viruses without the need for any prior amplification step. This work demonstrates that the FLBHs provide an improved electrochemical platform for immobilizing thiolated DNA capture probes that increase the sensitivity of the biosensor, while BDP-NaSO3 serves as a newly powerful electrochemical indicator of the hybridization event. As a proof of concept, SARS-CoV-2 was selected as the model virus. The developed biosensor demonstrated selective, rapid, and straightforward detection of the specific sequence RNA-dependent RNA-polymerase (RdRp) of SARS-CoV-2 with a detection limit of 4.97 fM and a linear range from 16.6 fM to 100 fM. Furthermore, this platform successfully detects the virus directly in nasopharyngeal swab samples with a viral load of at least 19 Cts without being subjected to any prior amplification stage. Finally, the high stability of the biosensor response, which has been working under ambient conditions for over one month, the selectivity and rapidity for specific virus detection, and the requirement of low-volume samples for the determination are remarkable characteristics that make it ideal for its potential application in clinical diagnosis in point-of-care settings., This work was financially supported by the Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, RED2022-134120-T, PID2023-150844OB-I00, PID2022- 138908NB-C31, and PID2021-122299NB-I00), the Community of Madrid (REACT-UE NANOCOV-CM and Y2020/NMT6469), the Spanish Ministry of Science, Innovation and Universities (TED2021-129738B-I00, TED2021-130470B-I00, and TED2021- 129999B-C32) and the “María de Maeztu” Programme for Units of Excellence in R&D, CEX2023-001316-M. Laura Gutiérrez-Gálvez gratefully acknowledges the financial support of a Formación del Profesorado Universitario (FPU) grant from the Spanish Ministry of Universities (FPU19/06309). Estefanía Enebral-Romero received financial support from the “Nanotecnología para detección del SARS-CoV-2 y sus variantes, NANOCOV” project and a contract as a pre-doctoral researcher funded by a grant CEX2020-001039-S, supported by MCIN/AEI/10.13039/501100011033. We also acknowledge María U. González and Raquel Alvaro for their help with fluorescence microscopy and EDAX mapping, respectively, and the services of the MiNa Laboratory at IMN and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and the EU (FEDER, FSE). We also acknowledge the “Servicio de Microbiología, Hospital Universitario Ramón y Cajal and Instituto Ramón y Cajal de Investigación Sanitaria (IRYCIS)” for providing the clinical samples. We acknowledge the support from the “(MAD2D-CM)-UAM” project funded by Comunidad de Madrid by the Recovery, Transformation and Resilience Plan and by NextGenerationEU from the European Union., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dendrimer-based DNA biosensor for HIV virus detection

  • Enebral Romero, Estefanía
  • Toldos-Torres, Marta
  • López-Diego, David
  • Luna, Mónica
  • Failde, Marta
  • González-Tobío, Brais
  • Zamora, Félix
  • Falces-Romero, Iker
  • Montes, María Luisa
  • García-Mendiola, Tania
In this work, we propose an innovative electrochemical DNA biosensor for the early, rapid, selective, and sensitive detection of the human immunodeficiency virus (HIV) based on its genetic code. This platform is based on the integration of few-layer bismuthene (FLB) which provides a nanostructured surface and facilitates the anchoring of the DNA dendrimer which incorporates the biorecognition element (a capture probe complementary to the HIV-specific DNA sequence). The hybridization between the capture probe and the specific HIV target sequence is detected using Azure A (AA) as a redox indicator. The dendrimer-based DNA biosensor selectively detects HIV from 10.0 fM to 10.0 pM, exhibit a low detection limit of 3.03 fM and a 60-day stability, and has been validated using plasma samples from infected patients with varying viral loads., This work was financially supported by the Spanish Ministry of Science, Innovation and Universities through the following projects: MCIU-25-RED2024-153970-T, PID2023-150844OB-I00, RED2022-134120-T, PID2022-138908NB-C31, PDC2021-120782-C21, and TED2021-129738B-I00. F.Z. acknowledges support from Spanish Ministry of Science, Innovation and Universities with the grant PID2022-138908NB-C31, from the Community of Madrid, the European Union's NextGenerationEU programme and the Recovery, Transformation and Resilience Plan, with the “MAD2D-CM-UAM” project, and from the Spanish Ministry of Science and Innovation through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2023-001316-M). B. G. acknowledges the financial support from the “Ayuda para Contratos Predoctorales para la Formación de Doctores” program of MICINN (PRE2020-093162). Additional support was provided by the European Innovation Council under grant agreement 101047081 (EVA). We also acknowledge the MiNa Laboratory at IMN for technical support, and funding from the MCIN/AEI/10.13039/501100011033, EU (FEDER, FSE), and Next Generation EU/PRTR (EQC2021-006944-P)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Designing covalent organic frameworks for organic catalysis: bridging reticular and molecular chemistry

  • Shirani, Mohammad Ali
  • Afshari, Mohaddeseh
  • Romero-Muñiz, Ignacio
  • Platero Prats, Ana Eva
  • Dinari, Mohammad
  • Zamora, Félix
Covalent organic frameworks (COFs) have gained significant attention over the past decade as heterogeneous catalysts for a wide range of applications. Among the most prominent is organic synthesis, a key area in disciplines such as medicinal chemistry, materials science, and designing molecules with optoelectronic properties. In this review, we provide an overview of the fundamental advances in the synthetic design of COFs, specifically focusing on strategies to enhance their catalytic activity for organic transformations. The discussion is organized around four key areas: catalysis driven by the material's backbone, ligand design for organocatalysis, support for metals, and the hosting of nanostructures such as nanoparticles or enzymes., M. A. S., M. A. and M. D., gratefully acknowledge the Iranian National Science Foundation (INSF) for their financial (Grant No. 4026090) support and the Research Affairs Division of the Isfahan University of Technology (IUT), for partial financial support. I. R.-M. and F. Z., acknowledge financial support from the Comunidad de Madrid and the Spanish State through the Recovery, Transformation and Resilience Plan [“Materiales Disruptivos Bidimensionales (2D)” (MAD2D-CM) (UAM2)-MRR Materiales Avanzados], and the European Union through the Next Generation EU funds. F. Z. acknowledges the grants PDC2022-133498-I00, TED2021-129886B-C42, and PID2022-138908NB-C31. F. Z. also acknowledges support from the European Innovation Council under grant agreement 101047081 (EVA). A. E. P.-P. acknowledges the grants PID2021-123839OB-I00, RYC2018-024328-I, and CNS2022-135261 funded by MICIU/AEI/10.13039/501100011033. F. Z. and A. E. P.-P. acknowledge support from the Spanish Ministry of Science, Innovation and Universities through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2023-001316 M). I. R.-M. also acknowledges Juan de la Cierva programme JDC2023-051645-I, funded by MCIU/AEI/10.13039/501100011033 and by the FSE+., With funding form the Spanish government through the “María de Maeztu Unit of Excellence” accreditation (CEX2023-001316 M)., Peer reviewed