Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publicación Artículo científico (JournalArticle)

Microwave-Driven Exfoliation of Bulk 2H-MoS2 after Acetonitrile Prewetting Produces Large-Area Ultrathin Flakes with Exceptionally High Yield

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic, mechanically interlocked porphyrin–carbon nanotubes for quantum computation and spintronics

  • Moreno-Da Silva, Sara
  • Martínez, Jesús I.
  • Develioglu, Aysegul
  • Nieto-Ortega, Belén
  • Juan-Fernández, Leire de
  • Ruiz-Gonzalez, Luisa
  • Picón, Antonio
  • Oberli, Soléne
  • Alonso, Pablo J.
  • Moonshiram, Dooshaye
  • Pérez, Emilio M.
  • Burzurí, Enrique
Atomic-scale reproducibility and tunability endorse magnetic molecules as candidates for spin qubits and spintronics. A major challenge is to implant those molecular spins into circuit geometries that may allow one, two, or a few spins to be addressed in a controlled way. Here, the formation of mechanically bonded, magnetic porphyrin dimeric rings around carbon nanotubes (mMINTs) is presented. The mechanical bond places the porphyrin magnetic cores in close contact with the carbon nanotube without disturbing their structures. A combination of spectroscopic techniques shows that the magnetic geometry of the dimers is preserved upon formation of the macrocycle and the mMINT. Moreover, the metallic core selection determines the spin location in the mMINT. The suitability of mMINTs as qubits is explored by measuring their quantum coherence times (Tm). Formation of the dimeric ring preserves the Tm found in the monomer, which remains in the μs scale for mMINTs. The carbon nanotube is used as vessel to place the molecules in complex circuits. This strategy can be extended to other families of magnetic molecules. The size and composition of the macrocycle can be tailored to modulate magnetic interactions between the cores and to introduce magnetic asymmetries (heterometallic dimers) for more complex molecule-based qubits., E.B. acknowledges funds from the Ministerio de Innovación y Ciencia through the Ramón y Cajal fellowship (RYC2019-028429-I), Programa de Atracción del Talento Investigador de la Comunidad de Madrid (2017-T1/IND-5562), and Spanish Ministerio de Ciencia e Innovación through Project (RTI2018-096075-A-C22). E.M.P. acknowledges the European Research Council (ERC-PoC-842606), MINECO (CTQ2017-86060-P), and Comunidad de Madrid (S2018/NMT-4367). IMDEA Nanociencia receives support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (MINECO, Grant SEV-2016-0686). D.M. thanks the Acciones de Dinamización Europa Investigacion grant (EIN2019-103399) and the Spanish Ministerio de Ciencia, Innovacion y Universidades grant (PID2019-111086RA-I00). A.D. acknowledges funds from the Comunidad de Madrid through project Y2018/NMT4783 (QUIMITRONIC-CM). S.O. and A.P. acknowledge funding from the Comunidad de Madrid through TALENTO Grant 2017-T1/IND-5432 and from Grant RTI2018-097355-A-I00 (MCIU/AEI/FEDER, UE). The research leading to part of the results has further been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. In addition, this research used resources of the XAFS beamline at the Elettra light source (Italy), Petra P64 beamline (Germany), and the Advanced Photon Source (APS, Beamline 29 BM-B) at Argonne National Laboratory (USA). The APS is a U.S. DOE Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication of devices featuring covalently linked MoS2–graphene heterostructures

  • Vázquez Sulleiro, Manuel
  • Develioglu, Aysegul
  • Quirós‐Ovies, Ramiro
  • Martín-Pérez, Lucía
  • Martín Sabanés, Natalia
  • Gonzalez-Juarez, Maria Lourdes
  • Gómez, I. Jénnifer
  • Vera‐Hidalgo, Mariano
  • Sebastián, Víctor
  • Santamaría, Jesús
  • Burzurí, Enrique
  • Pérez, Emilio M.
The most widespread method for the synthesis of 2D–2D heterostructures is the direct growth of one material on top of the other. Alternatively, flakes of different materials can be manually stacked on top of each other. Both methods typically involve stacking 2D layers through van der Waals forces—such that these materials are often referred to as van der Waals heterostructures—and are stacked one crystal or one device at a time. Here we describe the covalent grafting of 2H-MoS2 flakes onto graphene monolayers embedded in field-effect transistors. A bifunctional molecule featuring a maleimide and a diazonium functional group was used, known to connect to sulfide- and carbon-based materials, respectively. MoS2 flakes were exfoliated, functionalized by reaction with the maleimide moieties and then anchored to graphene by the diazonium groups. This approach enabled the simultaneous functionalization of several devices. The electronic properties of the resulting heterostructure are shown to be dominated by the MoS2–graphene interface., The authors acknowledge European Research Council (ERC-PoC- 842606 (E.M.P.); ERC-AdG-742684 (J. S.) and the MSCA program MSCA-IF-2019-892667 (N.M.S.), MINECO (CTQ2017-86060-P (E.M.P.) and CTQ2016-79419-R), Ministerio de Ciencia e Innovación (RTI2018-096075-A-C22 (E.B.), RYC2019-028429-I (E.B.)) the Comunidad de Madrid (MAD2D-CM S2013/ MIT-3007 (E.M.P.), Y2018/NMT-4783 (A.D.)) and the Programa de Atracción del Talento Investigador 2017-T1/IND-5562 (E.B.)). CzechNanoLab Research Infrastructure supported by MEYS CR (LM2018110) are gratefully acknowledged. IMDEA Nanociencia acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (MINECO, grant no. SEV-2016-0686)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microwave-Driven Exfoliation of Bulk 2H-MoS2 after Acetonitrile Prewetting Produces Large-Area Ultrathin Flakes with Exceptionally High Yield

  • Quirós‐Ovies, Ramiro
  • Laborda, María
  • Martín Sabanés, Natalia
  • Martín-Pérez, Lucía
  • Moreno-Da Silva, Sara
  • Burzurí, Enrique
  • Sebastián, Víctor
  • Pérez, Emilio M.
  • Santamaría, Jesús
2D materials display exciting properties in numerous fields, but the development of applications is hindered by the low yields, high processing times, and impaired quality of current exfoliation methods. In this work we have used the excellent MW absorption properties of MoS2 to induce a fast heating that produces the near-instantaneous evaporation of an adsorbed, low boiling point solvent. The sudden evaporation creates an internal pressure that separates the MoS2 layers with high efficiency, and these are kept separated by the action of the dispersion solvent. Our fast method (90 s) gives high yields (47% at 0.2 mg/mL, 35% at 1 mg/mL) of highly exfoliated material (90% under 4 layers), large area (up to several μm2), and excellent quality (no significant MoO3 detected)., The authors acknowledge European Research Council (ERC-PoC-842606 (E.M.P.)); ERC-AdG-742684 (J. S.), MINECO (CTQ2017-86060-P and PID2020-116661RB-I00(E.M.P.)), MINECO (PID2021-127847OB-I00 (V.S.)), the Comunidad de Madrid (MAD2D-CM S2013/MIT-3007 (E.M.P.). IMDEA Nanociencia acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (MINECO, grant no. SEV-2016-0686). We also thank CIBER-BBN, an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III and by Fondo Europeo de Desarrollo Regional (Feder) “Una manera de hacer Europa”, with the assistance of the European Regional Development Fund. LMA-ELECMI and NANBIOSIS ICTs are gratefully acknowledged. N.M.S. acknowledges the MSCA program MSCA-IF-2019-892667. Finally, authors acknowledge Roberta Manno for her assistance in the microwave experiments and data analysis., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Covalent cross-linking of 2H-MoS nanosheets

  • Vázquez Sulleiro, Manuel
  • Quirós‐Ovies, Ramiro
  • Vera‐Hidalgo, Mariano
  • Gómez, I. Jénnifer
  • Sebastián, Víctor
  • Santamaría, Jesús
  • Pérez, Emilio M.
The combination of 2D materials opens a wide range of possibilities to create new-generation structures with multiple applications. Covalently cross-linked approaches are a ground-breaking strategy for the formation of homo or heterostructures made by design. However, the covalent assembly of transition metal dichalcogenides flakes is relatively underexplored. Here, a simple covalent cross-linking method to build 2H-MoS2–MoS2 homostructures is described, using commercially available bismaleimides. These assemblies are mainly connected vertically, basal plane to basal plane, creating specific molecular sized spaces between MoS2 sheets. Therefore, this straightforward approach gives access to the controlled connection of sulfide-based 2D materials., The European Research Council (ERC-StG-307609; ERC-PoC-842606; ERC-AdG-742684), MINECO (CTQ2017-86060-P and CTQ2016-79419-R) the Comunidad de Madrid (MAD2D-CM S2013/ MIT-3007), CzechNanoLab Research Infrastructure supported by MEYS CR (LM2018110) are gratefully acknowledged. IMDEA Nanociencia acknowledges support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (MINECO, Grant SEV- 2016-0686)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Covalent Cross-Linking of 2H-MoS2 Nanosheets

  • Vázquez Sulleiro, M.
  • Quirós-Ovies, R.
  • Vera-Hidalgo, M.
  • Gómez, I.J.
  • Sebastián, V.
  • Santamaría, J.
  • Pérez, E.M.
The combination of 2D materials opens a wide range of possibilities to create new-generation structures with multiple applications. Covalently cross-linked approaches are a ground-breaking strategy for the formation of homo or heterostructures made by design. However, the covalent assembly of transition metal dichalcogenides flakes is relatively underexplored. Here, a simple covalent cross-linking method to build 2H-MoS2–MoS2 homostructures is described, using commercially available bismaleimides. These assemblies are mainly connected vertically, basal plane to basal plane, creating specific molecular sized spaces between MoS2 sheets. Therefore, this straightforward approach gives access to the controlled connection of sulfide-based 2D materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Microwave-driven exfoliation of bulk 2H-MoS[sub]2 after acetonitrile prewetting produces large-area ultrathin flakes with exceptionally high yield

  • Quirós-Ovies, R.
  • Laborda, M.
  • Martín Sabanés, N.
  • Martín-Pérez, L.
  • Moreno Da-Silva, S.
  • Burzurí, E.
  • Sebastian, V.
  • Pérez, E. M.
  • Santamaría, J.
2D materials display exciting properties in numerous fields, but the development of applications is hindered by the low yields, high processing times, and impaired quality of current exfoliation methods. In this work we have used the excellent MW absorption properties of MoS2 to induce a fast heating that produces the near-instantaneous evaporation of an adsorbed, low boiling point solvent. The sudden evaporation creates an internal pressure that separates the MoS2 layers with high efficiency, and these are kept separated by the action of the dispersion solvent. Our fast method (90 s) gives high yields (47% at 0.2 mg/mL, 35% at 1 mg/mL) of highly exfoliated material (90% under 4 layers), large area (up to several μm2), and excellent quality (no significant MoO3 detected).