Pasar al contenido principal

NUEVAS ANTENAS PARA COMUNICACIONES MOVILES POR SATELITE EN BANDA KA

TEC2016-79700-C2-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 28
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Grating Lobes Reduction Using a Multilayer Frequency Selective Surface on a Dual-Polarized Aperture Array Antenna in Ka-Band

  • Sánchez-Escuderos, Daniel
  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
[EN] This paper presents a multilayer frequency selective surface for a dual-polarized aperture array antenna in Ka-band. The elements of the array are cylindrical open cavities with a diameter of at 30 GHz, and spaced one wavelength. Due to this separation between elements, which is limiting and not reducible by the architecture of the feeding network and the size of the radiating element, grating lobes appear. Frequency Selective Surfaces (FSS) can be a solution to this problem without modifying the feeder architecture nor the radiating elements. This paper presents the FSS design for reducing grating lobes level, the antenna assembly, and the experimental validation. The full antenna performance demonstrates that FSS operates in a range identical to the feeder (29.5 GHz to 31 GHz) with the added benefit of reducing the grating lobes level more than 10 dB for both polarizations., This work was supported by the Spanish Ministry of Economy and Competitiveness (Ministerio de Economia y Competitividad) under Project TEC2016-79700-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Compact Combline Filter Embedded in a Bed of Nails

  • Baquero Escudero, Mariano|||0000-0001-8772-5431
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] In this paper, we propose a compact topology for high-frequency bandpass filters using coaxial cavities embedded in a bed of nails, including a complete design procedure combining equivalent circuit models and full-wave simulators. The resonance generated around a shortened cylindrical nail of the bed hosting structure is used as the basic element of the proposed filter, which is fed through groove gap waveguides. For design purposes, an equivalent circuit model of the considered resonance is first obtained, and then the coupling levels between resonators are recovered with the distance between adjacent shortened nails. In order to validate the proposed structure and its design procedure, a filter prototype with a bandpass response (centered at 30 GHz and with relative bandwidth of 1.7%) has been designed, manufactured, and measured. Good experimental results, in terms of insertion losses (with a minimum value of 1.6 dB) and return losses (greater than 16.6 dB in the whole passband), have been achieved., This work was supported in part by the Spanish Government, Ministry of Economy, National Program of Research, Development and Innovation through the project SATCOM-KA "New antennas for mobile satellite communications in Ka-band" under Project TEC2016-79700-C2-1-R and in part by the "Demostradores tecnologicos de filtros y multiplexores con respuestas selectivas y sintonizables en nuevas guias compactas para aplicaciones espaciales" under Project TEC2016-75934-C4-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gap Waveguide Technology for Millimeter-Wave Antenna Systems

  • Rajo Iglesias, Eva
  • Uz Zaman, Ashraf
  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
[EN] Millimeter-wave communication systems require many innovative antennas adapted for future application scenarios such as the upcoming 5G cellular networks. Due to the strong path loss in free space at the millimeter-wave frequency range, high gain and low-cost antennas are in great demand. Also, advanced features such as multi-beam for multiple user, dual-polarization, or even complete phased arrays with enormous degrees of freedom in beamforming are some of the key research lines for antenna designers nowadays. In this article an overview of a new type of family of low-loss antennas and components based on the recently developed gap waveguide technology is presented. With the advent of new millimeter-wave applications, this low-cost and low-loss waveguide technology can be considered as a good candidate to be used as the core RF building block., This work has been partly funded by the Spanish Government through projects TEC2013-44019-R, TEC2016-79700-C2-1-R and TEC2016-79700-C2-2-R and by Madrid Regional Government under the project S2013/ICE-3000.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A Novel Circularly-Polarized T-shaped Slot Array Antenna in Ka-band

  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Sánchez-Escuderos, Daniel
[EN] A T-shaped slot-array antenna fed through a Groove Gap Waveguide (GGW) is presented in this paper. The array antenna operates at 30 GHz. The way the slots are excited, along with the T-shape on its lid allows a compact single-layer architecture. A uniform linear array of 12 elements is designed to demonstrate the viability of this concept for high-efficient singlelayer slot-array antennas. Preliminary results show a frequency bandwidth of 1 GHz with input reflection coefficient better than ¿12 dB. In addition, being a full-metal antenna, the expected efficiency is high. It is worth stressing the good polarization purity achieved, being below 1.5 dB within the band of interest., This work has been supported by the Spanish Ministry of Science, Innovation and Universities (Ministerio de Ciencia, Innovacion y Universidades) under project TEC2016-79700-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

8 x 8 Ka-Band Dual-Polarized Array Antenna Based on Gap Waveguide Technology

  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
  • ZAMAN, ASHRAF UZ
  • Yang, Jian
[EN] This paper describes an 8 x 8 fully metallic high-efficiency dual-polarized array antenna working at the Ka-band, based on the gap waveguide (GW) concept. The radiating element is a circular aperture backed by two stacked cylindrical cavities, which are orthogonally fed to achieve a dual-polarized performance. Both feeding layers consist of a GW corporate network to reach all the cavities backing each radiating element. Cavities are naturally integrated within the bed of nails hosting grooves and ridges for the guiding electromagnetic (EM) field, leading to a low-profile dual-polarized array in the Ka-band. The experimental results present good agreement with simulations. The measured radiation patterns agree well with the simulation and the antenna provides an average gain over 27 dBi within its operating bandwidth (29.5-31 GHz)., This work was supported by the Spanish Ministry of Science, Innovation and Universities (Ministerio de Ciencia, Innovacion y Universidades) under Project TEC2013-47360-C3-3-P and Project TEC2016-79700-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Mechanical phase shifter in gap-waveguide technology

  • Sánchez-Escuderos, Daniel
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
[EN] This contribution presents a low-loss mechanical phase shifter in gap-waveguide technology. The phase shifter is aimed at ground terminals for Ka-band satellite on-the-move applications. The use of the gap-waveguide technology allows to divide the device into two main blocks distributed in two levels: a lower-rotatable block, in charge of the power distribution and the phase shifting; and an upper-fixed block with the output waveguides. In this paper, the lower and upper blocks are designed using Groove-gap waveguides (GGW), and Ridge-gap waveguides, respectively, connected to each other by coupling slots. Results show a good performance within the operating frequency band in terms of the phase shift between consecutive output ports (suitable for array feeding), and the return loss level at the input port., This work has been supported by the Spanish Ministry of Science, Innovation and Universities (Ministerio de Ciencia, Innovacion y Universidades) under project TEC2016-79700- C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Dual Circularly-Polarized Slot-Array Antenna in Ka-Band fed by Groove Gap Waveguide

  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Sánchez-Escuderos, Daniel
[EN] A dual circularly-polarized slot-array antenna fed by a Groove Gap Waveguide (GGW) and operating in the KaBand is presented in this paper. A simple mechanism is proposed to switch the polarization, from RHCP to LHCP, and viceversa. The lid of the antenna has two pieces: one fixed and one sliding. The fixed piece hosts T-shaped slots, and the sliding block is in charge of adjusting the offset of the perpendicular grooves with respect to the longitudinal slots. Preliminary results show an axial ratio below 1.5 dB for both, RHCP and LHCP, within a bandwidth of 1 GHz centered at 30 GHz., This work has been supported by the Spanish Ministry of Science, Innovation and Universities (Ministerio de Ciencia, Innovacion y Universidades) under project TEC2016-79700-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dual Circularly Polarized Aperture Array Antenna in Gap Waveguide for High-Efficiency Ka-Band Satellite Communications

  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
[EN] A novel fully metallic Ka-band dual circularly polarized antenna array is presented in this contribution. It consists of 64 circular apertures (8x8) and it is implemented in gap waveguide technology. The antenna includes 4 layers, which are completely metallic, leading to a highly efficient performance. The experimental results confirm reflection coefficient values lower than -10 dB from 29 GHz to 31 GHz as well as stable radiation patterns throughout the whole frequency range. Good average axial ratio (AR) of 1.5 dB has been measured in the working band for both polarizations. Measured directivity is 28 dBi and antenna efficiency keeps close to 80%., This work was supported by the Spanish Ministry of Economy and Competitiveness (Ministerio de Economía y Competitividad) under Project TEC2016-79700-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Guía de onda ranurada con polarización circular conmutable en banda Ka y usando tecnología Gap Waveguide

  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
[ES] Se presenta una guia de onda ranurada con polarizacion dual circular y alimentada por una guia de onda Groove Gap (GGW) y que funciona en la banda Ka. Se propone un mecanismo simple para cambiar la polarizacion circular a ¿ derechas por circular a izquierdas, y viceversa. La tapa de la antena tiene dos piezas: una fija y otra deslizante. La pieza fija alberga ranuras en forma de T, y el bloque deslizante se encarga de ajustar el desplazamiento de las ranuras perpendiculares con respecto a las ranuras longitudinales. Los resultados preliminares muestran una relacion axial por debajo de 1.5 dB para ambos ¿ sentidos de polarizacion circular, dentro de un ancho de banda ¿ de 1 GHz centrado en 30 GHz., Este trabajo ha sido apoyado por el Ministerio de Ciencia, Innovación y Universidades en el marco del proyecto TEC2016-79700-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evanescent-Mode Ridge-Waveguide Radiating Filters for Space Applications

  • Sánchez-Escuderos, Daniel
  • Tosso, Giovanni
  • Angeletti, P.
  • GUGLIELMI, MARCO
  • Ruiz-Garnica, Jesús|||0000-0002-2361-2806
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This paper describes a new family of all-metallic radiators based on below-cutoff apertures fed by evanescentmode ridge waveguide filters. The pass band of the filters and the polarization of the apertures are configured to radiate orthogonal signals at different center frequencies. The simultaneous operation of these radiators in an array configuration results in interleaved apertures producing overlapped fields. This strategy reduces the volume and weight of the antenna system, which is a specially appealing characteristic in satellite antennas. Each isolated evanescent-mode filter ends in a small-size aperture and is designed following a novel synthesis procedure. Next, the radiating elements are combined, and the resulting array is analyzed as a multiplexer from the input ports to the freespace region thus accounting for all mutual couplings between different apertures. To validate the theoretical formulations, a prototype has also been manufactured. The results obtained show very good agreement between simulation and measurements in terms of reflection coefficient, side-lobe level and realized gain, thereby fully validating the new family of radiating arrays., This work was supported by the Spanish Ministry of Economics and Competitiveness under Project TEC2016-79700-C2-1-R, Project TEC2016-78028-C3-3-P, Project TEC2013-47037-C5-1-R, and Project TEC2016-75934-C4-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Single-Layer Circularly-Polarized Ka-Band Antenna Using Gap Waveguide Technology

  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Vila Jiménez, Antonio|||0000-0003-3730-3083
[EN] A single-layer circularly polarized array antenna is proposed in the context of the so-called gap waveguide (GW) technology. This ultra-compact antenna combines the corporate feeding network and the radiating apertures over one single layer, standing out among other solutions proposed so far in this technology. Apertures are backed by chamfered cylindrical cavities and are fed through a corporate feeding network, which combines both groove and ridge GWs. Cavities are naturally integrated within the bed of nails hosting grooves and ridges, leading to a very low-profile 4×4 array. Experimental results are presented to confirm the good radiation performance obtained by simulations. The proposed array architecture may be seamlessly enlarged to any size thanks to the scalability of the gap-based corporate feeding network, making this solution very attractive for medium to high-gain applications., This work was supported by the Spanish Ministry of Economics and Competitiveness under Project TEC2013-47360-C3-3-P and Project TEC2016-79700-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Full-Metal K-Ka Dual-Band Shared-Aperture Array Antenna Fed by Combined Ridge-Groove Gap Waveguide

  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
[EN] This letter presents an 8 x 8 dual-band shared-aperture array antenna operating in K-(19.5-21.5 GHz) and Ka-band (29-31 GHz) using gap waveguide technology. Radiating elements consist of circular apertures located on the top plate of the antenna and excited by two stacked cavities with different diameters for dual-frequency operation. A waffle grid is used on top to increase the effective area of apertures and reduce grating lobes. Each stacked cavity is fed by its appropriate corporate-feeding net-work: The upper feeding layer operates at 20 GHz band, and the lower one at 30 GHz band. As a result, the antenna presents two ports, one for each band, which radiate a directive far-field pattern with linear polarization, orthogonal to each other. Experimental results show impedance and radiation pattern bandwidths larger than 1.5 GHz in both bands., This work was supported by the Spanish Ministry of Economics and Competitiveness under Project TEC2016-79700-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dual-polarized planar lens antenna designed with a quad-ridged frequency selective surface

  • Moy-Li, Hon Ching
  • Sánchez-Escuderos, Daniel
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] This letter presents a microwave planar lens illuminated by a radially corrugated horn antenna. The lens is formed by a set of 5x5 multilevel unit cells working as a frequency selective surface. Each layer of the unit cells is formed by a square metallic ring with two sets of orthogonal stubs. The length of each set of stubs controls the transmission phase shift for each polarization, so that the lens can be configured independently for two orthogonal polarizations. The lens presented in this letter makes use of this operation to compensate the phase profile of the radiation pattern generated by the feeder. A prototype, with the lens located at 0.59 lambda from the feeder, has been fabricated. Measured results show a maximum gain above 14.44 dBi within the operating frequency band (12.55-13.10 GHz), and a crosspolar level below -32 dB within the HPBW., Spanish Ministry of Economics and Competitiveness, Grant/Award Number: TEC2016-78028-C3-3-P and TEC2016-79700-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis and Design of a Metamaterial Lens Antenna Using the Theory of Characteristic Modes

  • Santillán-Haro, Daniel Antonio
  • Sánchez-Escuderos, Daniel
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] A new single-layer metamaterial lens antenna aimed to operate at 10 GHz is proposed in this paper. The lens antenna consists of twelve capacitively coupled unit cells distributed along a ring and illuminated by an open-ended circular waveguide with a metallic resonant ring. The theory of characteristic modes is used to analyze the metamaterial lens, in order to provide an insight into the radiation characteristics of the antenna. The proposed antenna has been optimized, obtaining a large bandwidth and a maximum directivity of 12.88 dBi at 10 GHz., This work has been supported by the Spanish Ministry of Economy and Competitiveness (Ministerio de Economia y Competitividad) under the projects TEC2016-79700-C2-1-R and TEC2016-78028-C3-3-P and college scholarship grant of the National University of Chimborazo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Planar Lens Antenna for High Data Rate Applications

  • Santillan-Haro, Daniel
  • Sánchez-Escuderos, Daniel
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] A low-profile lens antenna formed by 2 metallic rings with strips short-circuiting both rings is presented. The theory of characteristic modes is used to facilitate the design, optimization, and analysis of the structure. Simulations and measurements are presented for the optimized single-layer metallic lens antenna. Measured results show a large operating bandwidth (14.7% relative -14 dB impedance bandwidth) with a maximum directivity above 13.70 dBi and a return loss better than 14 dB, This work has been supported by the Spanish Ministry of Science, Innovation and Universities (Ministerio Ciencia, Innovacion y Universidades) under the projects TEC2016-79700-C2-1-Rand TEC2016-78028-C3-3-P and college scholarship graduate of the National University of Chimborazo
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On Multimode Equivalent Network Representation of Finite Arrays of Open-Ended Waveguides

  • Sánchez-Escuderos, Daniel
  • Guglielmi, Marco
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This communication describes a multimode equivalent network (MEN) representation of a finite array of open-ended lossless waveguides on an infinite ground plane. The derivation is based on an integral equation formulated at the interface between the waveguides and the free-space region. The MEN is formulated using the concept of accessible and localized modes, and includes ports for the free-space plane waves. The MEN derived can be easily combined with the MENs of other microwave components, thus allowing for the accurate analysis and design of more complex systems composed of waveguide elements and radiating apertures. Both simulated and experimental results are presented showing a very good agreement, thereby fully validating the proposed equivalent network representation., This work was supported in part by the Spanish Ministry of Economics and Competitiveness under Project TEC2013-47360-C3-3-P, Project TEC2016-79700-C2-1-R, Project TEC2016-78028-C3-3-P, Project TEC2013-47037-C5-1-R, and Project TEC2016-75934-C4-1-R and in part by the Generalitat Valenciana under Project GV/2015/065.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cross polarization in microwave antennas: Case study of a circular waveguide, Polarización cruzada en antenas de microondas: Caso de estudio de una guía de onda circular

  • Santillán-Haro, Daniel Antonio
  • Sánchez-Escuderos, Daniel
  • Navarro-Méndez, Diana Verónica
  • Carrera-Suárez, Luis Fernando
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[ES] Durante la ultima d ¿ ecada, el tema de la polarizaci ¿ on de la antena atrae gran inter ¿ es. ¿ La mejora de la polarizacion cruzada genera una distribuci ¿ on de un campo altamente ¿ simetrico en la apertura de una antena, sin embargo, es dif ¿ ¿¿cil hacer fuentes circulares de baja polarizacion cruzada que operen en un ancho de banda amplio. En este art ¿ ¿¿culo se presenta un caso de estudio para mejorar la polarizacion cruzada de una apertura ¿ circular. Como la gu¿¿a de onda circular tiene una polarizacion cruzada pobre, se han ¿ considerado tres soluciones posibles para mejorar la polarizacion cruzada, que ha sido ¿ presentada en trabajos anteriores. La primera solucion se basa en un disco met ¿ alico ¿ que, despues de un proceso de optimizaci ¿ on, se obtiene un di ¿ ametro externo optimizado ¿ de 90.42 mm. La segunda solucion se basa en un anillo met ¿ alico alrededor de la gu ¿ ¿¿a de onda circular, la dimension optimizada del anillo de di ¿ ametro externo es de 90.42 ¿ mm con un grosor de 1.63 mm. La tercera solucion se basa en dos anillos alrededor de ¿ la gu¿¿a de onda circular, cuyas dimensiones optimizadas son un diametro exterior de ¿ 122.48 mm y un diametro interno de 90.42 mm. El conocimiento obtenido es valioso ¿ para explicar la mejora del nivel de adaptacion de una antena de parche con un anillo ¿ de alrededor a 5.8 GHz, [EN] During the last decade, the subject of antenna polarization attracts great interest. The improve of the cross polarization generates a distribution of a highly symmetric field in the aperture of the antenna, however, it is difficult to make low cross polarization circular sources to operate over a wide bandwidth. In this paper, a study case is presented to improve the cross polarization of a circular aperture. As the circular waveguide has a poor cross polarization, three possible solutions have been considered to improve the cross polarization in previous works. The first solution is based on a metallic disk, which after an optimization process obtains an external diameter of 90.42mm. The second solution is based on a metallic ring around the circular waveguide, the optimized dimension of the external diameter ring is 90.42mm with a thickness of 1.63mm. The third solution is based on two rings around the circular waveguide, which optimized dimensions of the rings are an outer diameter of 122.48mm, and an inner diameter of 90.42mm. This knowledge is valuable to explain the improvement of matching level of a patch antenna with a ring around 5.8 GHz., This work has been supported by the Spanish Ministry of Science, Innovation and Universities (Ministerio de Ciencia, Innovacion y Universidades) under ´ the projects TEC2016-79700-C2-1-R, TEC2016- 78028-C3-3-P and college scholarship graduate of the National University of Chimborazo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Performance Assessment of Gap Waveguide Array Antennas: CNC Milling vs. 3D Printing

  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
[EN] This letter focuses on comparing manufacturing features of three-dimensional (3-D) printing techniques versus conventional computer numerical control (CNC) milling in the context of gap waveguide technology. To this end, a single-layer array antenna has been designed as a demonstrator. The antenna under test, intended for Ka-band, is composed of 8 x 8 radiators fed by a gap-waveguide (GW) corporate network. Two identical prototypes have been manufactured, but each applying a different fabrication technique, i.e., 3-D printing and CNC milling. The experimental results of both antennas are presented, under the same conditions and measurement facilities. The conclusions drawn in this letter provide a valuable assessment of 3-D-printing viability for GW arrays against the conventional milling technique., This work was supported by the Spanish Ministry of Economy and Competitiveness (Ministerio de Economia y Competitividad) under Grant TEC2016-79700-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-Cost Ka-band Switchable RHCP/LHCP Antenna Array for Mobile SATCOM Terminal

  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
  • Vila Jiménez, Antonio|||0000-0003-3730-3083
  • Lenormand, Regis
[EN] Achieving a functional antenna for mobile satellite communications terminals in Ka-band is probably one of the most challenging tasks in current antenna engineering, particularly bearing in mind they need to be low profile and "affordable." This quest is involving many companies in the field. Our contribution represents one of such efforts. The antenna is based on a slotted waveguide array technology to maximize efficiency and it features a number of novel solutions, going from its robust polarization switching mechanism, to the use of a thin wideband polarizer and the utilization of groove gap waveguides. This communication reports the measured data of a fully functional prototype to validate its novel contributions., This work was supported by the European Space Agency through project LOCOMO under Contract 400010860913NLUS.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-Profile Radially Corrugated Horn Antenna

  • Moy-Li, Hon Ching
  • Sánchez-Escuderos, Daniel
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] This letter proposes a low-profile horn antenna with radial corrugations. The depth and width of the corrugations are suitably chosen to excite the mode HE11 in the corrugated section. This mode spreads uniformly across the whole aperture, thereby maximizing the radiating area and the aperture efficiency. The good polarization purity of mode HE11 provides a good cross-polar level and a low sidelobe level. The structure is fed by a circular waveguide with two matching elements on the feeding plane that minimize the return loss level. A prototype has been fabricated and measured to operate in the Ku band. The prototype, with a height of just 6.9 mm, i.e., 0.3 lambda0, provides a maximum gain above 12.2 dBi and an aperture efficiency better than 72% within the operating frequency band., This work was supported by the Spanish Ministry of Economics and competitiveness under projects TEC2016-79700-C2-1-R and TEC2016-78028-C3-3-P. (Corresponding author: Daniel Sanchez-Escuderos.)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

60-GHz Single-Layer Slot-Array Antenna fed by Groove Gap Waveguide

  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Teniente, Jorge
[EN] A V-band single-layer low-loss slot-array antenna is presented in this letter. Radiating slots are backed by coaxial cavities, which are fed through a groove gap waveguide E-plane corporate feed network. Cavity resonances are created by shortening nails with respect to the surrounding ones. This fact enables a compact single-layer architecture since coaxial cavities and feeding network can share the same bed of nails. A 16 x 16 array is designed, constructed, and measured to demonstrate the viability of this concept for high-gain single-layer slot-array antennas. In addition, this solution can be extended to circular polarization by seamlessly adding a polarizer above the slots without changing the feeding network piece. Measurements show a relative bandwidth of 10% with input reflection coefficient better than -10 dB and a mean antenna efficiency above 70% within the operating frequency band (57-66 GHz)., This work was supported by the Spanish Ministry of Economy and Competitiveness under Project TEC2016-79700-C2-1-R.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

60 GHz Single-Layer Slot-Array Antenna Fed by Groove Gap Waveguide

  • Ferrando-Rocher, Miguel
  • Valero-Nogueira, Alejandro
  • Herranz-Herruzo, Jose Ignacio
  • Teniente, Jorge
A V-band single-layer low-loss slot-array antenna is presented in this letter. Radiating slots are backed by coaxial cavities, which are fed through a groove gap waveguide E-plane corporate feed network. Cavity resonances are created by shortening nails with respect to the surrounding ones. This fact enables a compact single-layer architecture since coaxial cavities and feeding network can share the same bed of nails. A 16 × 16 array is designed, constructed, and measured to demonstrate the viability of this concept for high-gain single-layer slot-array antennas. In addition, this solution can be extended to circular polarization by seamlessly adding a polarizer above the slots without changing the feeding network piece. Measurements show a relative bandwidth of 10% with input reflection coefficient better than -10 dB and a mean antenna efficiency above 70% within the operating frequency band (57-66 GHz).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

True-Time-Delay Mechanical Phase Shifter in Gap Waveguide Technology for Slotted Waveguide Arrays in Ka-band

  • Sánchez-Escuderos, Daniel
  • Herranz-Herruzo, Jose Ignacio
  • Ferrando-Rocher, Miguel
  • Valero-Nogueira, Alejandro
This paper proposes a novel all-metal mechanical phase shifter in gap waveguide technology. The phase shifter is aimed at providing beam-scanning capabilities to conventional slot array antennas along the elevation plane. To validate experimentally the beam-steering functionality, a 4×8 slot-array antenna has been designed and fabricated, along with the phase-shifting mechanism. The whole antenna consists of two pieces: a lower rotatable block, which changes the length of concentric Groove Gap Waveguides, and an upper fixed block, where the slot-array antenna is placed. Experimental results validate the proposed concept, having obtained steering angles of up to 25∘, with gain levels around 20 dBi with an antenna efficiency close to 90%. A reflection coefficient below –10 dB is achieved for a wide range of rotation angles from 29.5 GHz to 30.5 GHz. The proposed phase shifter is completely scalable to any array size and its true-time-delay nature enables wide steering ranges for closely-spaced slot arrays with wideband radiation performance.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Grating Lobes Reduction Using a Multilayer Frequency Selective Surface on a Dual-Polarized Aperture Array Antenna in Ka-Band

  • Sánchez-Escuderos, Daniel
  • Ferrando-Rocher, Miguel
  • Herranz-Herruzo, Jose Ignacio
  • Valero-Nogueira, Alejandro
This paper presents a multilayer frequency selective surface for a dual-polarized aperture array antenna in Ka-band. The 8×8 elements of the array are cylindrical open cavities with a diameter of 0.6λ0 at 30 GHz, and spaced one wavelength. Due to this separation between elements, which is limiting and not reducible by the architecture of the feeding network and the size of the radiating element, grating lobes appear. Frequency Selective Surfaces (FSS) can be a solution to this problem without modifying the feeder architecture nor the radiating elements. This paper presents the FSS design for reducing grating lobes level, the antenna assembly, and the experimental validation. The full antenna performance demonstrates that FSS operates in a range identical to the feeder (29.5 GHz to 31 GHz) with the added benefit of reducing the grating lobes level more than 10 dB for both polarizations.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Dual Circularly Polarized Aperture Array Antenna in Gap Waveguide for High-Efficiency Ka-Band Satellite Communications

  • Ferrando-Rocher, Miguel
  • Herranz-Herruzo, Jose Ignacio
  • Valero-Nogueira, Alejandro
  • Bernardo-Clemente, Bernardo
A novel fully metallic Ka-band dual circularly polarized antenna array is presented in this contribution. It consists of 64 circular apertures (8x8) and it is implemented in gap waveguide technology. The antenna includes 4 layers, which are completely metallic, leading to a highly efficient performance. The experimental results confirm reflection coefficient values lower than −10 dB from 29 GHz to 31 GHz as well as stable radiation patterns throughout the whole frequency range. Good average axial ratio (AR) of 1.5 dB has been measured in the working band for both polarizations. Measured directivity is 28 dBi and antenna efficiency keeps close to 80%.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Guía de onda ranurada con polarización circular conmutable en banda Ka y usando tecnología Gap Waveguide

  • Ferrando-Rocher, Miguel
  • Herranz-Herruzo, Jose Ignacio
  • Valero-Nogueira, Alejandro
  • Bernardo-Clemente, Bernardo
Se presenta una guía de onda ranurada con polarización dual circular y alimentada por una guía de onda Groove Gap (GGW) y que funciona en la banda Ka. Se propone un mecanismo simple para cambiar la polarización circular a derechas por circular a izquierdas, y viceversa. La tapa de la antena tiene dos piezas: una fija y otra deslizante. La pieza fija alberga ranuras en forma de T, y el bloque deslizante se encarga de ajustar el desplazamiento de las ranuras perpendiculares con respecto a las ranuras longitudinales. Los resultados preliminares muestran una relación axial por debajo de 1.5 dB para ambos sentidos de polarización circular, dentro de un ancho de banda de 1 GHz centrado en 30 GHz.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Full-Metal K-Ka Dual-Band Shared-Aperture Array Antenna Fed by Combined Ridge-Groove Gap Waveguide

  • Ferrando-Rocher, Miguel
  • Herranz-Herruzo, Jose Ignacio
  • Valero-Nogueira, Alejandro
  • Bernardo-Clemente, Bernardo
This letter presents an 8 × 8 dual-band shared-aperture array antenna operating in K-(19.5-21.5 GHz) and Ka-band (29-31 GHz) using gap waveguide technology. Radiating elements consist of circular apertures located on the top plate of the antenna and excited by two stacked cavities with different diameters for dual-frequency operation. A waffle grid is used on top to increase the effective area of apertures and reduce grating lobes. Each stacked cavity is fed by its appropriate corporate-feeding network: The upper feeding layer operates at 20 GHz band, and the lower one at 30 GHz band. As a result, the antenna presents two ports, one for each band, which radiate a directive far-field pattern with linear polarization, orthogonal to each other. Experimental results show impedance and radiation pattern bandwidths larger than 1.5 GHz in both bands.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

8×8 Ka -Band Dual-Polarized Array Antenna Based on Gap Waveguide Technology

  • Ferrando-Rocher, Miguel
  • Herranz-Herruzo, Jose Ignacio
  • Valero-Nogueira, Alejandro
  • Bernardo-Clemente, Bernardo
  • Zaman, Ashraf Uz
  • Yang, Jian
This paper describes an 8 × 8 fully metallic highefficiency dual-polarized array antenna working at the Ka-band, based on the gap waveguide (GW) concept. The radiating element is a circular aperture backed by two stacked cylindrical cavities, which are orthogonally fed to achieve a dual-polarized performance. Both feeding layers consist of a GW corporate network to reach all the cavities backing each radiating element. Cavities are naturally integrated within the bed of nails hosting grooves and ridges for the guiding electromagnetic (EM) field, leading to a low-profile dual-polarized array in the Ka-band. The experimental results present good agreement with simulations. The measured radiation patterns agree well with the simulation and the antenna provides an average gain over 27 dBi within its operating bandwidth (29.5-31 GHz).