Pasar al contenido principal

ONDAS MILIMETRICAS EN TECNOLOGIA LTCC PARA SISTEMAS DE ANTENAS 2020

TEC2013-47360-C3-3-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the Contribution to the Field of the Nonphysical Characteristic Modes in Infinite Dielectric Circular Cylinders Under Normal Excitation

  • Bernabeu Jiménez, Tomás
  • Kishk, A. A.
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Vico Bondía, Felipe|||0000-0003-1292-3657
[EN] Here, a detailed analysis of characteristic modes and fields of an infinite dielectric circular cylinder when computed through the Poggio-Miller-Chang-Harrington-Wu-Tsai formulation is carried out. The purpose is to determine their contribution to the total field, inside and outside the dielectric body and under two possible excitations: incident plane wave or electric line source within the cylinder. The study has been done analytically to provide necessary physical insight of the results obtained. New details about the so-called nonphysical modes are provided. It is found that these modes, that can be neglected outside the dielectric body, do have a significant contribution to the inner field when the excitation source is within the dielectric body. It is concluded that the terms physical and nonphysical characteristic modes should be replaced for radiating and nonradiating characteristic modes.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Channel sounding and indoor radio channel characteristics in the W-band

  • Martínez Inglés, M.T.
  • Gaillot, D.
  • Pascual-García, Juan
  • Molina-García-Pardo, José María
  • Rodríguez Rodríguez, José Víctor
  • Juan Llácer, Leandro
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
This work presents directional radio channel measurements in the W-band using a commercial versatile channel sounder based on a vector network analyzer (VNA), capable of measuring scattering parameters from 75 to 500 GHz with frequency converters. The commercial setup has been modified by increasing the distance for one of the converters using precision coaxial cables and avoiding the use of amplifiers. Firstly, initial distance-dependent single-input single-output (SISO) measurements of indoor radio channels are presented to assess the validity of the setup in the 75 110 GHz frequency band with highly directive horn antennas. Then, single-input multiple-output (SIMO) radio channels were measured at 94 GHz using one directional and one omnidirectional antenna mounted on two positioners. Initial channel characterization is presented comprising root mean square (rms) delay spread, rms angular spread, K-factor, and path loss in an indoor environment at 94 GHz., This work was supported by MINECO, Spain (TEC2013-47360-C3-2-P TEC2013-47360-C3-3-P) and by European FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Propagation Characteristics of Groove Gap Waveguide Below and Above Cutoff

  • Berenguer Verdú, Antonio José
  • Fusco, Vincent
  • Zelenchuk, Dmitry E.
  • Sánchez-Escuderos, Daniel
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
Recently, gap waveguides have been shown as a potential alternative to convenational waveguides in the millimeter-wave band. Until now, groove gap waveguide (GGW) has been studied through direct correspondence with rectangular waveguide with the same physical dimensions. However, there have been observed differences in the above cutoff propagation characteristics between these two waveguide types. Furthermore, the behavior of GGW below cutoff remains unknown. This work presents a discussion of both below and above cutoff propagation characteristics of GGW, and introduces a simple model that explains the observed GGW behavior and establishes well its propagation characteristics. Two thru-reflect-line calibration kits have been manufactured, and the measurements have good agreement with the proposed analysis model results., This work was supported by the Spanish Ministerio de Economia y Competitividad under Project TEC2013-47360-C3-3-P and Project TEC2013-47037-C5-1-R and by the Spanish Ministerio de Educacion under FPU Research Fellowship Program AP2010-4227.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Path Loss Characterization Vehicular-to-Infrastructure Communications at 700 MHz and 5.9 GHz in Urban Environments

  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Reig, Juan|||0000-0003-4541-9326
  • FERNÁNDEZ GONZÁLEZ, HERMAN ANTONIO
[EN] In this work, we perform a path loss characterization of the vehicular-to-infrastructure (V2I) channel in an urban environment based on a log-distance path loss propagation model. The model parameters have been derived from channel measurements at 700 MHz and 5.9 GHz. The correlation between the path loss exponent and the height of the antenna used in the infrastructure side is investigated. The measurements have been collected in an urban area of Valencia, Spain, under real road traffic conditions., This work was supported in part by the Spanish Ministerio de Economia y Competitividad under Project TEC2013-47360-C3-3-P, and the Departamento Administrativo de Ciencia, Tecnologia e Innovacion COLCIENCIAS de Colombia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Small-Scale Fading Analysis of the Vehicular-to-Vehicular Channel inside Tunnels

  • Loredo, Susana
  • del Castillo, Adrian
  • Fernandez, Herman
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Reig, Juan|||0000-0003-4541-9326
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
[EN] We present a small-scale fading analysis of the vehicular-to-vehicular (V2V) propagation channel at 5.9 GHz when both the transmitter (Tx) and the receiver (Rx) vehicles are inside a tunnel and are driving in the same direction. This analysis is based on channel measurements carried out at different tunnels under real road traffic conditions. The Rice distribution has been adopted to fit the empirical cumulative distribution function (CDF). A comparison of the K factor values inside and outside the tunnels shows differences in the small-scale fading behavior, with the K values derived from the measurements being lower inside the tunnels. Since there are so far few published results for these confined environments, the results obtained can be useful for the deployment of V2V communication systems inside tunnels., The authors want to thank J. A. Campuzano, D. Balaguer, and L. Morag on for their support during the measurement campaign, as well as B. Bernardo-Clemente and A. VilaJimenez for their support and assistance in the laboratory activities. This work has been funded in part by Programa Estatal de Fomento de la Investigacion Cientifica y Tecnica de Excelencia delMinisterio de Economia y Competitividad, Spain, TEC2013-47360-C3-3-P, and Departamento Administrativo de Ciencia, Tecnologia e Innovacion COLCIENCIAS en Colombia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

8 x 8 Ka-Band Dual-Polarized Array Antenna Based on Gap Waveguide Technology

  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
  • ZAMAN, ASHRAF UZ
  • Yang, Jian
[EN] This paper describes an 8 x 8 fully metallic high-efficiency dual-polarized array antenna working at the Ka-band, based on the gap waveguide (GW) concept. The radiating element is a circular aperture backed by two stacked cylindrical cavities, which are orthogonally fed to achieve a dual-polarized performance. Both feeding layers consist of a GW corporate network to reach all the cavities backing each radiating element. Cavities are naturally integrated within the bed of nails hosting grooves and ridges for the guiding electromagnetic (EM) field, leading to a low-profile dual-polarized array in the Ka-band. The experimental results present good agreement with simulations. The measured radiation patterns agree well with the simulation and the antenna provides an average gain over 27 dBi within its operating bandwidth (29.5-31 GHz)., This work was supported by the Spanish Ministry of Science, Innovation and Universities (Ministerio de Ciencia, Innovacion y Universidades) under Project TEC2013-47360-C3-3-P and Project TEC2016-79700-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modal pattern stability factor as a figure of merit for characteristic modes

  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
  • Mohamed Mohamed-Hicho, Nora
This Letter proposes the use of a modal pattern stability factor (MPSF) parameter to quantify the pattern stability associated to characteristic modes (CM). The proposed parameter can be used as a figure of merit for CM associated to arbitrary-shaped structures, aiding the antenna design process. This parameter can be used (together with other modal parameters) to optimise the geometry of a radiating element in order to improve the radiation pattern stability in a desired range of frequencies. Two examples are presented for analysis. First, MPSF for the CM of three ring antennas with different width are analysed, showing how pattern stability of CM depend on this geometrical parameter. Secondly, three metallic plates with different shapes are analysed in terms of MPSF, in order to assess the stability of the CM for each geometry., This work was supported by the Spanish Ministry of Economics and Competitiveness under project TEC2013-47360-C3-3-P, and by Generalitat Valenciana under project GV/2015/065.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transition between gap waveguides for use in multilayer structures at millimeter-wave frequencies

  • Carrera-Suárez, Luis Fernando
  • Navarro-Méndez, Diana Verónica
  • Sánchez-Escuderos, Daniel
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
A compact twist to connect a ridge-gap waveguide and a groove-gap waveguide in the Ka-band is presented. Measured insertion loss for a single twist is around 0.5 dB between 37.5 and 39 GHz. Return loss for a double twist is better than 12 dB in the same frequency range. (c) 2016 Wiley Periodicals, Inc. Microwave Opt Technol Lett 58:102-106, 2016, This This work was supported in part by the Spanish Ministerio de Economia y Competitividad under Project TEC2013-47360-C3-3-P, and by the Government of Ecuador under a SENESCYT grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of Small-Scale Fading Distributions in Vehicle-to-Vehicle Communications

  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Reig, Juan|||0000-0003-4541-9326
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Fernández González, Herman Antonio
  • Loredo, Susana
[EN] This work analyzes the characteristics of the small-scale fading distribution in vehicle-to-vehicle (V2V) channels. The analysis is based on a narrowband channelmeasurements campaign at 5.9GHz designed specifically for that purpose.Themeasurements were carried out in highway and urban environments around the city of Valencia, Spain.Theexperimental distribution of the small-scale fading is compared to several analytical distributions traditionally used to model the fast fading in wireless communications, such as Rayleigh, Nakagami-𝑚,Weibull, Rice, and 𝛼-𝜇 distributions. The parameters of the distributions are derived through statistical inference techniques and their goodness-of-fit is evaluated using the Kolmogorov-Smirnov (K-S) test. Our results show that the 𝛼-𝜇 distribution exhibits a better fit compared to the other distributions, making its use interesting to model the small-scale fading in V2V channels., This work has been funded in part by the Programa Estatal de Fomento de la Investigacion Cientifica y Tecnica de Excelencia del Ministerio de Economia y Competitividad, Spain, TEC2013-47360-C3-3-P, and the Departamento Administrativo de Ciencia, Tecnologia e Innovacion COLCIENCIAS en Colombia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A high-order locally corrected Nyström scheme for charge-current integral equations

  • Vico Bondía, Felipe|||0000-0003-1292-3657
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Berenguer Verdú, Antonio José
A high-order Nyström scheme is developed for electromagnetic (EM) scattering problems of smooth objects. The implementation is based on different well-known charge-current formulations. This study aims to develop a novel quadrature scheme to compute different singular integrals that appear on integral equation methods in EMs. The proposed quadrature scheme is used on a locally corrected Nyström method, and applied to charge-current integral equations to obtain a fast, accurate, and a low-frequency stable method to solve EM scattering problems. The proposed method allows obtaining accuracy in the range 4–10 digits in the near electric and magnetic scattered field for certain simple geometries and a wide range of frequencies. We also do a preliminary research on nonsmooth geometries obtaining a certain degree of accuracy depending on the particular charge-current integral equation used., Manuscript received September 29, 2013; revised December 13, 2014; accepted December 14, 2014. Date of publication January 14, 2015; date of current version April 03, 2015. This work was supported by the Spanish Ministry of Science and Innovation (Ministerio de Ciencia e Innovacion) under projects CSD2008-00068, TEC2010-20841-C04-01, and TEC2013-47360-C3-3-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Wideband double monopole for mobile, WLAN and C2C services in vehicular applications

  • Navarro-Méndez, Diana Verónica
  • Carrera-Suárez, Luis Fernando
  • Sánchez-Escuderos, Daniel
  • Gallo, Michele
  • Zarnberlan, Daniel
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
[EN] In this letter, a three-dimensional antenna solution for automotive applications is presented. The proposed solution is formed by two independent antennas, perpendicularly placed inside a plastic cover with a shark-fin shape. The antennas, designed with low-cost materials, exhibit omnidirectional radiation patterns in the azimuthal plane. The first antenna is a doubleshorted monopole that provides service from 698 to 960 MHz (in the LTE700, GSM850, and GSM900 bands), whereas the second antenna is a drop-shaped monopole that operates from 1.7 to 2.7 GHz (in the DCS1800, PCS1900, WCDMA2100, WLAN2400, LTE2600, WiMAX2350, and Wi-Fi at 2.4-GHz bands), and from 5.1 to 6 GHz (in theWi-Fi at 5 GHz and C2C bands). Results show a good matching and radiation efficiency at all bands., This work was supported by Project SEESAW P.O.R. 2007-2013-bando 2009-Azione 1.1.2, the Spanish Ministry of Economics and competitiveness under Projects TEC2013-47360-C3-3-P and CSD2008-00068, and the Government of Ecuador under the SENESCYT.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A novel low-profile high-gain UHF antenna using high-impedance surfaces

  • Mohamed Mohamed-Hicho, Nora
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
A novel wideband low-profile planar antenna design based on the use of a high-impedance surface (HIS) is presented for digital television (DTV) reception in the UHF band. The proposed design is based on a wideband monopole antenna in close proximity to an artificial ground plane, composed of an array of square metal loops at the top, an air gap and a ground plane at the bottom, without grounded vias. Low-cost substrates are employed in the design: rigid PVC for the antenna and foamed PVC for the artificial ground plane. The advantages of the proposed design for DTV applications are high gain, low profile, light weight, low cost and large bandwidth. Details of the proposed antenna design are described, and measurements together with a comparison to a conventional antenna with PEC ground plane are presented., This work was supported by the Spanish Ministry of Science and Innovation under Projects TEC2010-20841-C04-01, TEC2013-47360-C3-3-P, and CSD2008-00068.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Single-Layer Circularly-Polarized Ka-Band Antenna Using Gap Waveguide Technology

  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Vila Jiménez, Antonio|||0000-0003-3730-3083
[EN] A single-layer circularly polarized array antenna is proposed in the context of the so-called gap waveguide (GW) technology. This ultra-compact antenna combines the corporate feeding network and the radiating apertures over one single layer, standing out among other solutions proposed so far in this technology. Apertures are backed by chamfered cylindrical cavities and are fed through a corporate feeding network, which combines both groove and ridge GWs. Cavities are naturally integrated within the bed of nails hosting grooves and ridges, leading to a very low-profile 4×4 array. Experimental results are presented to confirm the good radiation performance obtained by simulations. The proposed array architecture may be seamlessly enlarged to any size thanks to the scalability of the gap-based corporate feeding network, making this solution very attractive for medium to high-gain applications., This work was supported by the Spanish Ministry of Economics and Competitiveness under Project TEC2013-47360-C3-3-P and Project TEC2016-79700-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Groove Gap Waveguide as an alternative to rectangular waveguide for H-plane components

  • Berenguer Verdú, Antonio José
  • Sánchez-Escuderos, Daniel
  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
A comparative study between groove gap waveguide (GGW) technology and classical H-plane rectangular waveguide (RWG) technology is presented by evaluating their performance in the implementation of a narrow-band filter at the V-band. A filter with the same specifications has been manufactured and measured for each technology. Measured responses are compared and a re-assembling robustness test is carried out. The GGW filter presents a better response and remains completely invariant to the re-assembling process, which is shown to affect notably the RWG filter response. Remarkable low insertion loss of only 1.5 dB (cavities equivalent quality factor higher than 800) is obtained for the GGW filter., This work was supported by the Spanish Ministerio de Economia y Competitividad under projects TEC2013-47360-C3-3-P and TEC2013-47037-C5-1-R, and by the Spanish Ministerio de Educacion under FPU research fellowship program AP2010-4227.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-loss Circularly Polarized Periodic Leaky-Wave Antenna

  • Sánchez-Escuderos, Daniel
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
This letter presents a periodic leaky-wave array antenna with circular polarization at millimeter-wave frequencies. The antenna is designed on the low-loss planar Goubau transmission line to maximize the radiation efficiency of the antenna. The unit cell of the array is formed by four dipoles located on both faces of the Goubau line s substrate. A prototype has been fabricated and measured. Experimental results show an impedance bandwidth above 15% for S11 < - 10 and a 3-dB axial-ratio bandwidth of 7.6%. The radiation efficiency and maximum gain of the prototype are above 90% and 15.6 dBi, respectively, from 38 to 41 GHz. The maximum gain and the minimum axial ratio present the characteristic steering behavior of leaky-wave antennas., This work was supported by the Spanish Ministry of Education and Science (Ministerio de Educacion y Ciencia) under Projects TEC2010-20841-C04-01, TEC2013-47360-C3-3-P, and CSD2008-00068.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Untilted narrow-wall slots excited by parasitic dipoles in groove-gap waveguide technology

  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Vila Jiménez, Antonio|||0000-0003-3730-3083
  • Martínez Giner, Sara
This work describes a new way to excite untilted slots in the narrow wall of a rectangular waveguide. The radiating structure consists of an inclined parasitic dipole located within the waveguide, parallel to narrow wall, and close to the untilted slot. Furthermore, the rectangular waveguide is advantageously replaced by a groove gap waveguide so that nonwraparound resonant slots can be used. The concept is discussed in detail and demonstrated experimentally through a linear array, This work was supported in part by the Spanish Ministerio de Economia y Competitividad under project TEC2013-47360-C3-3P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Ring Resonances in Groove Gap Waveguides with Application to Slot Array Antennas

  • Jiménez Sáez, Alejandro
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
[EN] This paper describes a simple procedure to create a compact resonance effect in the context of new contactless gap waveguide structures. The resonance is achieved shortening a given nail in the textured surface and can be used to feed slots in a slot array. In the following, the resonance effect is explained and a basic radiating cell with two slots is designed to illustrate the potential of the resonant device., This work was supported by the Spanish Ministerio de Economia y Competitividad under Project TEC2013-47360-C3-3-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On Multimode Equivalent Network Representation of Finite Arrays of Open-Ended Waveguides

  • Sánchez-Escuderos, Daniel
  • Guglielmi, Marco
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This communication describes a multimode equivalent network (MEN) representation of a finite array of open-ended lossless waveguides on an infinite ground plane. The derivation is based on an integral equation formulated at the interface between the waveguides and the free-space region. The MEN is formulated using the concept of accessible and localized modes, and includes ports for the free-space plane waves. The MEN derived can be easily combined with the MENs of other microwave components, thus allowing for the accurate analysis and design of more complex systems composed of waveguide elements and radiating apertures. Both simulated and experimental results are presented showing a very good agreement, thereby fully validating the proposed equivalent network representation., This work was supported in part by the Spanish Ministry of Economics and Competitiveness under Project TEC2013-47360-C3-3-P, Project TEC2016-79700-C2-1-R, Project TEC2016-78028-C3-3-P, Project TEC2013-47037-C5-1-R, and Project TEC2016-75934-C4-1-R and in part by the Generalitat Valenciana under Project GV/2015/065.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of LTCC-Based Dielectric Flat Lens Antennas and Switched-Beam Arrays for Future 5G Millimeter-Wave Communication Systems

  • Imbert, Marc
  • Romeu, Jordi
  • Martinez-Ingles, Maria-Teresa
  • Molina-García-Pardo, José María
  • Jofre, Lluis
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
[EN] This paper presents the design, low-temperature co-fired ceramics (LTCC) fabrication, and full experimental verification of novel dielectric flat lens antennas for future high data rate 5G wireless communication systems in the 60 GHz band. We introduce and practically completely evaluate and compare the performance of three different inhomogeneous gradient-index dielectric lenses with the effective parameters circularly and cylindrically distributed. These lenses, despite their planar profile antenna configuration, allow full 2-D beam scanning of high-gain radiation beams. A time-domain spectroscopy system is used to practically evaluate the permittivity profile achieved with the LTCC manufacturing process, obtaining very good results to confirm the viability of fabricating inhomogeneous flat lenses in a mass production technology. Then, the lenses performance is evaluated in terms of radiation pattern parameters, maximum gain, beam scanning, bandwidth performance, efficiencies, and impedance matching in the whole frequency band of interest. Finally, the performance of the three lenses is also experimentally evaluated and compared to a single omni-directional antenna and to a ten-element uniform linear array of omni-directional antennas in real 60 GHz wireless personal area network indoor line-of-sight (LOS) and obstructed-LOS environments, obtaining interesting and promising remarkable results in terms of measured received power and root-mean-square delay spread. At the end of this paper, an innovative switched-beam antenna array concept based on the presented cylindrically distributed effective parameters lens is also introduced and completely evaluated, confirming the potential applicability of the proposed antenna solution for future 5G wireless millimeter-wave communication system., This work was supported in part by the Spanish Inter-Ministerial Commission on Science and Technology (CICYT) under Projects TEC2013-47360-C3-1-P, TEC2013-47360-C3-2-P, and TEC2016-78028-C3-1-P, by FEDER and the Unidad de Excelencia Maria de Maeztu MDM-2016-0600, which is financed by the Agenda Estatal de Investigacion, Spain, and by the "Ministerio de Economia" through the FPI fellowship program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microwave Planar Lens Antenna Designed with a Three-Layer Frequency Selective Surface

  • Sánchez-Escuderos, Daniel
  • Moy-Li, Hon Ching
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] A multilevel Frequency Selective Surface (FSS) formed by a non-uniform distribution of circular holes on a metallic sheet is presented. The FSS is aimed at working as a planar lens to increase the gain of the feeding aperture. The unit cell of the FSS acts as a high-pass filter that provides the necessary phase shift to focus the beam on the far-field region. The phase shift is synthesized by suitably configuring the size and position of each unit cell in the FSS. The planar lens is placed next to the feeding aperture to confer the structure a low-profile shape. A prototype has been designed, fabricated and measured. Results show an increment of 7.32 dB in the gain compared to the feeding aperture within a 7.33% bandwidth around 20.45 GHz, and a side-lobe level below &#1048576;12 dB, with an aperture efficiency of 65% and a radiation efficiency above 90%., This work was supported in part by the Spanish Ministry of Economics and competitiveness under Project TEC2013-47360-C3-3-P and in part by Generalitat Valenciana under Project GV/2015/065.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Investigation of the paht loss propagation for V2V communications in the opposite direction

  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Reig, Juan|||0000-0003-4541-9326
  • FERNÁNDEZ GONZÁLEZ, HERMAN ANTONIO
[EN] In this work, we investigate the path loss propagation of the vehicular-to-vehicular (V2V) channel when the vehicles are driving in the opposite direction. The investigation is based on narrowband channel measurements at 700 MHz and 5.9 GHz carried out in different environments under real road traffic conditions, i.e., rural, highway, suburban and urban environments. The results show that there is a path loss offset between the forward and reverse directions, which is related to the environment. Also, we provide mean values of the path loss propagation exponent showing that are higher than the values derived when the vehicles are driving in the same direction. These results should be considered for a proper simulation and design of the future V2V communications systems., This work was supported in part by the Spanish Ministerio de Economía y Competitividad under Project TEC2013-47360-C3-3-P, and the Departamento Administrativo de Ciencia, Tecnología e Innovacion COLCIENCIAS de Colombia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Internal Natural Resonances Prediction through the Theory of Characteristic Modes

  • Bernabeu Jiménez, Tomás
  • Kishk, A. A.
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Vico Bondía, Felipe|||0000-0003-1292-3657
[EN] Some aspects in the interpretation of the resonances provided by the theory of characteristic modes for dielectric bodies are analyzed. The analysis has been performed analytically based on the Poggio-Miller-Chang-Harrington-Wu-Tsai formulation on a canonical problem, the infinite dielectric circular cylinder. First, natural resonances and characteristic mode resonances are presented and compared. It has been observed that characteristic mode resonances are in general near to internal natural resonances but not to external ones. It is also demonstrated that characteristic resonances become closer to internal natural ones as the relative permittivity of the dielectric cylinder is increased, This work was supported by the Spanish Ministerio de Economia y Competitividad under the project TEC2013-47360-C3-3P. This paper is a theoretical research article and contains no data.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Antena plana con polarización circular para comunicaciones por satélite en banda Ka: desafíos y resultados

  • Ferrando-Rocher, Miguel
  • Herranz-Herruzo, Jose Ignacio
  • Valero-Nogueira, Alejandro
  • Bernardo-Clemente, Bernardo
This paper reports the design and measurements of two radiating panels (TX / RX) for satellite communications on the move in Ka-band. A multilayer structure, both in the power distribution network and in the circularly-polarized radiating element, is adopted to ensure the demanded bandwidth. These panels provide answers and solve problems for future antennas with similar characteristics.
UPCommons. Portal del coneixement obert de la UPC
Publicación Capítulo o parte de un libro (BookPart)

Design of minimum nonlinear distortion reconfigurable antennas for next-generation communication systems

  • Ramírez Arroyave, Germán Augusto
  • Barlabe Dalmau, Antoni|||0000-0002-1176-1329
  • Pradell i Cara, Lluís|||0000-0003-4026-226X
  • Araque Araque, Javier Leonardo
  • Cetiner, Bedri Artug
  • Jofre Roca, Lluís|||0000-0002-0547-901X
Nonlinear effects in the radio front-end can degrade communication quality and system performance. In this paper we present a new design technique for reconfigurable antennas that minimizes the nonlinear distortion and maximizes power efficiency through the minimization of the coupling between the internal switching ports and the external feeding ports. As a nonlinear design and validation instance, we present the nonlinear characterization up to 50 GHz of a PIN diode commonly used as a switch for reconfigurable devices in the microwave band. Nonlinear models are extracted through X-parameter measurements supported by accurate calibration and de-embedding procedures. Nonlinear switch models are validated by S-parameter measurements in the low power signal regime and by harmonic measurements in the large-signal regime and are further used to predict the measured nonlinearities of a reconfigurable antenna. These models have the desired particularity of being integrated straightforwardly in the internal multi-port method formulation, which is used and extended to account for the power induced on the switching elements. A new figure of merit for the design of reconfigurable antennas is introduced—the power margin, that is, the power difference between the fed port and the switching elements, which combined with the nonlinear load models directly translates into nonlinearities and power-efficiency-related metrics. Therefore, beyond traditional antenna aspects such as port match, gain, and beam orientation, switch power criteria are included in the design methodology. Guidelines for the design of reconfigurable antennas and parasitic layers of minimum nonlinearity are provided as well as the inherent trade-offs. A particular antenna design suitable for 5G communications in the 3.5 GHz band is presented according to these guidelines, in which the specific switching states for a set of target performance metrics are obtained via a balancing of the available figures of merit with multi-objective separation criteria, which enables good control of the various design trade-offs. Average Error Vector Magnitude (EVM) and power efficiency improvement of 12 and 6 dB, respectively, are obtained with the application of this design approach. In summary, this paper introduces a new framework for the nonlinear modeling and design of reconfigurable antennas and provides a set of general-purpose tools applicable in cases beyond those used as examples and validation in this work. Additionally, the use of these models and guidelines is presented, demonstrating one of the most appealing advantages of the reconfigurable parasitic layer approach, their low nonlinearity., This research was supported by the Spanish “Comision Interministerial de Ciencia y Tecnologia” (CICYT) under projects TEC2013-47360-C3-1-P/AEI/10.13039/501100011033, TEC2016-78028-C3-1-P/AEI/10.13039/501100011033, and MDM2016-O6OO, and Catalan Research Group 2017 SGR 219, and by the Colombian “Departamento Administrativo de Ciencia, Tecnología e Innovación” (Colciencias) through convocatoria 727 de 2015, Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Design of minimum nonlinear distortion reconfigurable antennas for next-generation communication systems

  • Ramírez Arroyave, Germán Augusto
  • Barlabe Dalmau, Antoni
  • Pradell i Cara, Lluís
  • Araque Araque, Javier Leonardo
  • Cetiner, Bedri Artug
  • Jofre Roca, Lluís
Nonlinear effects in the radio front-end can degrade communication quality and system performance. In this paper we present a new design technique for reconfigurable antennas that minimizes the nonlinear distortion and maximizes power efficiency through the minimization of the coupling between the internal switching ports and the external feeding ports. As a nonlinear design and validation instance, we present the nonlinear characterization up to 50 GHz of a PIN diode commonly used as a switch for reconfigurable devices in the microwave band. Nonlinear models are extracted through X-parameter measurements supported by accurate calibration and de-embedding procedures. Nonlinear switch models are validated by S-parameter measurements in the low power signal regime and by harmonic measurements in the large-signal regime and are further used to predict the measured nonlinearities of a reconfigurable antenna. These models have the desired particularity of being integrated straightforwardly in the internal multi-port method formulation, which is used and extended to account for the power induced on the switching elements. A new figure of merit for the design of reconfigurable antennas is introduced—the power margin, that is, the power difference between the fed port and the switching elements, which combined with the nonlinear load models directly translates into nonlinearities and power-efficiency-related metrics. Therefore, beyond traditional antenna aspects such as port match, gain, and beam orientation, switch power criteria are included in the design methodology. Guidelines for the design of reconfigurable antennas and parasitic layers of minimum nonlinearity are provided as well as the inherent trade-offs. A particular antenna design suitable for 5G communications in the 3.5 GHz band is presented according to these guidelines, in which the specific switching states for a set of target performance metrics are obtained via a balancing of the available figures of merit with multi-objective separation criteria, which enables good control of the various design trade-offs. Average Error Vector Magnitude (EVM) and power efficiency improvement of 12 and 6 dB, respectively, are obtained with the application of this design approach. In summary, this paper introduces a new framework for the nonlinear modeling and design of reconfigurable antennas and provides a set of general-purpose tools applicable in cases beyond those used as examples and validation in this work. Additionally, the use of these models and guidelines is presented, demonstrating one of the most appealing advantages of the reconfigurable parasitic layer approach, their low nonlinearity., This research was supported by the Spanish “Comision Interministerial de Ciencia y Tecnologia” (CICYT) under projects TEC2013-47360-C3-1-P/AEI/10.13039/501100011033, TEC2016-78028-C3-1-P/AEI/10.13039/501100011033, and MDM2016-O6OO, and Catalan Research Group 2017 SGR 219, and by the Colombian “Departamento Administrativo de Ciencia, Tecnología e Innovación” (Colciencias) through convocatoria 727 de 2015, Peer Reviewed, Postprint (published version)