Pasar al contenido principal

THEORETICAL AND EXPERIMENTAL CHANNEL MODELING OF MILLIMITER AND SUBMILLIMITER WAVE SYSTEMS FOR COMMUNICATION AND IMAGING

TEC2013-47360-C3-2-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD POLITÉCNICA DE CARTAGENA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Channel sounding and indoor radio channel characteristics in the W-band

  • Martínez Inglés, M.T.
  • Gaillot, D.
  • Pascual-García, Juan
  • Molina-García-Pardo, José María
  • Rodríguez Rodríguez, José Víctor
  • Juan Llácer, Leandro
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
This work presents directional radio channel measurements in the W-band using a commercial versatile channel sounder based on a vector network analyzer (VNA), capable of measuring scattering parameters from 75 to 500 GHz with frequency converters. The commercial setup has been modified by increasing the distance for one of the converters using precision coaxial cables and avoiding the use of amplifiers. Firstly, initial distance-dependent single-input single-output (SISO) measurements of indoor radio channels are presented to assess the validity of the setup in the 75 110 GHz frequency band with highly directive horn antennas. Then, single-input multiple-output (SIMO) radio channels were measured at 94 GHz using one directional and one omnidirectional antenna mounted on two positioners. Initial channel characterization is presented comprising root mean square (rms) delay spread, rms angular spread, K-factor, and path loss in an indoor environment at 94 GHz., This work was supported by MINECO, Spain (TEC2013-47360-C3-2-P TEC2013-47360-C3-3-P) and by European FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of the Receiver Attachment Position on Ultra Wideband Off-Body Channels

  • García Serna, Rubén Gregorio
  • Molina-García-Pardo, J.M.
  • Garcia-Pardo, Concepcion|||0000-0002-2774-980X
An experimental characterization of the off-body propagation channel for the ultrawideband (UWB) band from 3.1 GHz to 8 GHz for body area networks (BAN) is presented in this letter. The channel is evaluated in terms of path loss (PL) and Root Mean Square (RMS) delay spread. Channel statistics from measurements carried out considering subjects of different gender in standing still position under line-of-sight (LOS) conditions are compared to the ones without the presence of the body to evaluate the variation on the statistics of the channel in presence of a human body. It is observed a high variation on the path loss and the RMS delay spread parameters for the same attachment position of the receiver antenna on the body of the subjects and a dependence of the statistics with the number of received multipath components (MPC) because of the shadowing effect of the body., This work was supported in part by MINECO, Spain (TEC2013-47360-C3-2-P), and in part by the European FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of LTCC-Based Dielectric Flat Lens Antennas and Switched-Beam Arrays for Future 5G Millimeter-Wave Communication Systems

  • Imbert, Marc
  • Romeu, Jordi
  • Martinez-Ingles, Maria-Teresa
  • Molina-García-Pardo, José María
  • Jofre, Lluis
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
[EN] This paper presents the design, low-temperature co-fired ceramics (LTCC) fabrication, and full experimental verification of novel dielectric flat lens antennas for future high data rate 5G wireless communication systems in the 60 GHz band. We introduce and practically completely evaluate and compare the performance of three different inhomogeneous gradient-index dielectric lenses with the effective parameters circularly and cylindrically distributed. These lenses, despite their planar profile antenna configuration, allow full 2-D beam scanning of high-gain radiation beams. A time-domain spectroscopy system is used to practically evaluate the permittivity profile achieved with the LTCC manufacturing process, obtaining very good results to confirm the viability of fabricating inhomogeneous flat lenses in a mass production technology. Then, the lenses performance is evaluated in terms of radiation pattern parameters, maximum gain, beam scanning, bandwidth performance, efficiencies, and impedance matching in the whole frequency band of interest. Finally, the performance of the three lenses is also experimentally evaluated and compared to a single omni-directional antenna and to a ten-element uniform linear array of omni-directional antennas in real 60 GHz wireless personal area network indoor line-of-sight (LOS) and obstructed-LOS environments, obtaining interesting and promising remarkable results in terms of measured received power and root-mean-square delay spread. At the end of this paper, an innovative switched-beam antenna array concept based on the presented cylindrically distributed effective parameters lens is also introduced and completely evaluated, confirming the potential applicability of the proposed antenna solution for future 5G wireless millimeter-wave communication system., This work was supported in part by the Spanish Inter-Ministerial Commission on Science and Technology (CICYT) under Projects TEC2013-47360-C3-1-P, TEC2013-47360-C3-2-P, and TEC2016-78028-C3-1-P, by FEDER and the Unidad de Excelencia Maria de Maeztu MDM-2016-0600, which is financed by the Agenda Estatal de Investigacion, Spain, and by the "Ministerio de Economia" through the FPI fellowship program.