Pasar al contenido principal

SOLUCIONES TECNOLOGICAS COMPACTAS PARA DISPOSITIVOS PASIVOS DE ALTA FRECUENCIA CON RESPUESTAS AVANZADAS Y RECONFIGURABLES

TEC2013-47037-C5-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 38
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design of Capacitively Loaded Coupled-Line Bandpass Filters With Compact Size and Spurious Suppression

  • Orellana, Marco
  • Selga, Jordi
  • Vélez, París
  • Sans, Marc
  • Rodríguez Pérez, Ana María
  • Bonache, Jordi
  • Martin, Ferran
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This paper is focused on the synthesis of capacitively loaded coupled lines for the design of bandpass filters with compact size and spurious suppression. The filters consist of cascaded pairs of coupled lines periodically loaded with patch capacitors. The loading capacitances provide a slow-wave effect to the coupled lines useful for filter miniaturization, whereas periodicity introduces bandgaps that can be controlled in order to achieve spurious suppression. Filter design is achieved following an automated process based on aggressive space mapping (ASM) optimization. The two reported examples, a third-order filter with central frequency f0=1.0 GHz, 8% fractional bandwidth, and 0.1-dB ripple level and a fifth-order filter with central frequency f0=1.8 GHz, 8% fractional bandwidth, and 0.1-dB ripple level, demonstrate the potential of the proposed ASM-based design approach, as well as the effectiveness of the loading capacitances to reduce filter size and reject the spurious bands. Significant size reduction in both filters is achieved, whereas the out-of-band rejection is better than 30 and 45 dB in the third-order and fifth-order filters, respectively, up to at least 4f0 ., This work was supported in part by MINECO-Spain under Project TEC2013-47037-C5-1-R, Project TEC2013-40600-R, and Project TEC2013-49221-EXP, in part by the Generalitat de Catalunya under Project 2014SGR-157, and in part by FEDER funds. The work of F. Martin was supported by the Institucio Catalana de Recerca i Estudis Avancats. The work of M. Orellana was supported in part by the Universidad de Costa Rica, in part by MICITT, and in part by CONICIT
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Propagation Characteristics of Groove Gap Waveguide Below and Above Cutoff

  • Berenguer Verdú, Antonio José
  • Fusco, Vincent
  • Zelenchuk, Dmitry E.
  • Sánchez-Escuderos, Daniel
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
Recently, gap waveguides have been shown as a potential alternative to convenational waveguides in the millimeter-wave band. Until now, groove gap waveguide (GGW) has been studied through direct correspondence with rectangular waveguide with the same physical dimensions. However, there have been observed differences in the above cutoff propagation characteristics between these two waveguide types. Furthermore, the behavior of GGW below cutoff remains unknown. This work presents a discussion of both below and above cutoff propagation characteristics of GGW, and introduces a simple model that explains the observed GGW behavior and establishes well its propagation characteristics. Two thru-reflect-line calibration kits have been manufactured, and the measurements have good agreement with the proposed analysis model results., This work was supported by the Spanish Ministerio de Economia y Competitividad under Project TEC2013-47360-C3-3-P and Project TEC2013-47037-C5-1-R and by the Spanish Ministerio de Educacion under FPU Research Fellowship Program AP2010-4227.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improved low reflection transition from microstrip line to empty substrate integrated waveguide

  • Esteban González, Héctor|||0000-0002-5936-658X
  • Sánchez-Marín, Juan Rafael|||0000-0003-4887-5810
  • Bachiller Martin, Maria Carmen|||0000-0002-5518-5060
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Belenguer, Ángel
[EN] Substrate-integrated waveguides (SIWs) maintain the advantages of planar circuits (low loss, low profile, easy manufacturing, and integration in a planar circuit board) and improve the quality factor of filter resonators. Empty substrateinte-grated waveguides (ESIWs) substantially reduce the insertion losses, because waves propagate through air instead of a lossy dielectric. The first ESIW used a simple tapering transition that cannot be used for thin substrates. A new transition has recently been proposed, which includes a taper also in the microstrip line, not only inside the ESIW, and so it can be used for all substrates, although measured return losses are only 13 dB. In this letter, the cited transition is improved by placing via holes that prevent undesired radiation, as well as two holes that help to ensure good accuracy in the mechanization of the input iris, thus allowing very good return losses (over 20 dB) in the measured results. A design procedure that allows the successful design of the proposed new transition is also provided. A back-to-back configuration of the improved new transition has been successfully manufactured and measured., This work was supported in part by the Ministerio de Economia y Competitividad, Spanish Goverment, under Grant TEC2013-47037-C05-3-R and Grant TEC2013-47037-C05-1-R, and in part by the Ministerio de Educacion, Cultura y Deporte under the Fellowship Program for Training University Professors under Grant FPU14/00150.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Empty SIW Technologies: A Major Step Toward Realizing Low-Cost and Low-Loss Microwave Circuits

  • Belenguer, Angel
  • Borja, Alejandro L.
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] Substrate-integrated circuits (SICs) [1] have attracted much attention in the last several years because of their great potential. The first implementation of the concept can be found in [2] as a feeding mechanism for a slot array antenna. Deslandes and Wu [3], [4] used the term substrate-integrated waveguide (SIW) to define this waveguide integrated in a substrate where the lateral walls are synthesized with metallized via holes, and the upper and lower walls are the top and bottom metallization of the substrate. Many other SICs have been developed since the appearance of the SIW. In the substrate-integrated slab waveguide [5], the guide is synthesized on a substrate by cutting an air hole in the center of an SIW, and the frequency operating bandwidth is increased. The ridge SIW [6] also increases the operation bandwidth by drilling cylindrical air holes in the middle of the SIW. The substrate-integrated nonradiative dielectric waveguide [7] uses a specific pattern of air holes as lateral walls, creating a dielectric waveguide channel that reduces the radiation losses with respect to the SIW. The half-mode SIW [8] reduces the size of the SIW by half by exploiting the fact that there is a symmetry plane along the propagation direction that is equivalent to a magnetic wall., This work was supported by the Ministerio de Economia, Industria, y Competitividad, Spanish government, under research projects TEC2013-47037-C5-3-R, TEC2013-47037-C5-1-R, TEC2016-75934-C4-1-R, and TEC2016-75934-C4-4-R and by Generalitat Valenciana under research project PROMETEOII/2015/005.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cross-guide Moreno directional coupler in empty substrate integrated waveguide

  • Miralles-Navarro, Enric
  • Belenguer, Ángel
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] Substrate integrated waveguides (SIWs) combine the advantages of rectangular waveguides (low losses) and planar circuits (low cost and low profile). Empty substrate integrated waveguide (ESIW) has been proposed as a novel configuration in SIWs recently. This technology significantly reduces the losses of conventional SIW by removing its inner dielectric. The cross-guide directional coupler is a well-known low-profile design for having a broadband waveguide coupler. In this paper a cross-guide coupler with ESIW technique is proposed. In such a manner, the device can be integrated with microwave circuits and other printed circuit board components. It is the first time that a cross-guide coupler is implemented in ESIW technology. The designed, fabricated, and measured device presents good results as a matter of insertion loss of 1 dB (including transitions), reflection under 20 dB, coupling between 19.5 and 21.5 dB, and directivity higher than 15 dB over targeted frequency range from 12.4 GHz to 18 GHz. The coupler implemented in ESIW improves the directivity when compared to similar solutions in other empty substrate integrated waveguide solutions., This work was supported by the Ministerio de Economia y Competitividad, Spanish Goverment, under research projects TEC2013-47037-C5-3-R and TEC2013-47037-C5-1-R. All the data related with this work can be requested from H. Esteban (hesteban@dcom.upv.es).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automated design of bandpass filters based on open complementary split ring resonators (OCSRRs) using aggressive space mapping (ASM) optimization

  • Rodríguez Pérez, Ana María
  • Selga, Jordi
  • Sans, Marc
  • Martin, Ferran
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This paper is focused on the design of bandpass filters based on open complementary split ring resonators (OCSRRs) in microstrip technology. The filters are obtained by coupling the corresponding shunt resonators (OCSRRs) through admittance inverters (quarter wavelength transmission line sections). Different undesirable effects derived from the chosen topology are taken into account and are compensated at the design level. These effects include the reduction in bandwidth (caused by the narrowband functionality of the line sections acting as admittance inverters), and the presence of a spurious band above the filter passband. The proposed technique is based on the well-known aggressive space mapping algorithm, which is a powerful tool for the synthesis and design of microwave components. The design of the OCSRR-based filter is provided in a fully automated way as the main result of this paper. Copyright (c) 2015 John Wiley & Sons, Ltd., This work has been supported by MINECO-Spain (projects TEC2010-17512 METATRANSFER, TEC2013-47037-C5-1-R, CONSOLIDER EMET CSD2008-00066, TEC2013-40600-R, and TEC2013-49221-EXP), Generalitat de Catalunya (project 2014SGR-157), and Institucio Catalana de Recerca i Estudis Avancats (who has awarded Ferran Martin).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evanescent-Mode Ridge-Waveguide Radiating Filters for Space Applications

  • Sánchez-Escuderos, Daniel
  • Tosso, Giovanni
  • Angeletti, P.
  • GUGLIELMI, MARCO
  • Ruiz-Garnica, Jesús|||0000-0002-2361-2806
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This paper describes a new family of all-metallic radiators based on below-cutoff apertures fed by evanescentmode ridge waveguide filters. The pass band of the filters and the polarization of the apertures are configured to radiate orthogonal signals at different center frequencies. The simultaneous operation of these radiators in an array configuration results in interleaved apertures producing overlapped fields. This strategy reduces the volume and weight of the antenna system, which is a specially appealing characteristic in satellite antennas. Each isolated evanescent-mode filter ends in a small-size aperture and is designed following a novel synthesis procedure. Next, the radiating elements are combined, and the resulting array is analyzed as a multiplexer from the input ports to the freespace region thus accounting for all mutual couplings between different apertures. To validate the theoretical formulations, a prototype has also been manufactured. The results obtained show very good agreement between simulation and measurements in terms of reflection coefficient, side-lobe level and realized gain, thereby fully validating the new family of radiating arrays., This work was supported by the Spanish Ministry of Economics and Competitiveness under Project TEC2016-79700-C2-1-R, Project TEC2016-78028-C3-3-P, Project TEC2013-47037-C5-1-R, and Project TEC2016-75934-C4-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Highly efficient full-wave electromagnetic analysis of 3D arbitrarily-shaped waveguide microwave devices using an integral equation technique

  • Vidal Pantaleoni, Ana|||0000-0002-3853-6260
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • San Blas Oltra, Ángel Antonio
  • Quesada Pereira, Fernando Daniel
  • Pérez Soler, Francisco Javier
  • Gil Raga, Jordi
  • Vicente Quiles, Carlos Pascual
  • Gimeno Martinez, Benito
A novel technique for the full-wave analysis of 3-D complex waveguide devices is presented. This new formulation, based on the Boundary Integral-Resonant Mode Expansion (BI-RME) method, allows the rigorous full-wave electromagnetic characterization of 3-D arbitrarily shaped metallic structures making use of extremely low CPU resources (both time and memory). The unknown electric current density on the surface of the metallic elements is represented by means of Rao-Wilton-Glisson basis functions, and an algebraic procedure based on a singular value decomposition is applied to transform such functions into the classical solenoidal and nonsolenoidal basis functions needed by the original BI-RME technique. The developed tool also provides an accurate computation of the electromagnetic fields at an arbitrary observation point of the considered device, so it can be used for predicting high-power breakdown phenomena. In order to validate the accuracy and efficiency of this novel approach, several new designs of band-pass waveguides filters are presented. The obtained results (S-parameters and electromagnetic fields) are successfully compared both to experimental data and to numerical simulations provided by a commercial software based on the finite element technique. The results obtained show that the new technique is specially suitable for the efficient full-wave analysis of complex waveguide devices considering an integrated coaxial excitation, where the coaxial probes may be in contact with the metallic insets of the component., This work was supported by the Ministerio de Economia y Competitividad, Spanish Government, under the Research Projects TEC2013-47037-C5-1-R and TEC2013-47037-C5-4-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Groove Gap Waveguide as an alternative to rectangular waveguide for H-plane components

  • Berenguer Verdú, Antonio José
  • Sánchez-Escuderos, Daniel
  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
A comparative study between groove gap waveguide (GGW) technology and classical H-plane rectangular waveguide (RWG) technology is presented by evaluating their performance in the implementation of a narrow-band filter at the V-band. A filter with the same specifications has been manufactured and measured for each technology. Measured responses are compared and a re-assembling robustness test is carried out. The GGW filter presents a better response and remains completely invariant to the re-assembling process, which is shown to affect notably the RWG filter response. Remarkable low insertion loss of only 1.5 dB (cavities equivalent quality factor higher than 800) is obtained for the GGW filter., This work was supported by the Spanish Ministerio de Economia y Competitividad under projects TEC2013-47360-C3-3-P and TEC2013-47037-C5-1-R, and by the Spanish Ministerio de Educacion under FPU research fellowship program AP2010-4227.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automated Design of Common-Mode Suppressed Balanced Wideband Bandpass Filters by Means of Aggressive Space Mapping

  • Sans, M.
  • Selga, J.
  • Velez, P.
  • Rodriguez Perez, Ana Maria
  • Bonache Albacete, Jordi
  • Martin, Ferran
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
The automated and unattended design of balanced microstrip wideband bandpass filters by means of aggressive space mapping (ASM) optimization is reported in this paper. The proposed filters are based on multisection mirrored stepped impedance resonators (SIRs) coupled through quarter-wavelength transmission lines, acting as admittance inverters., This work was supported by MINECO-Spain (projects TEC2013-47037-C5-1-R, TEC2013-40600-R, TEC2013-49221-EXP), Generalitat de Catalunya (project 2014SGR-157), Institucio Catalana de Recerca i Estudis Avancats (who awarded Ferran Martin), and by FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Practical Design of Filters Using EBG Waveguides Periodically Loaded with Metal Ridges

  • MARINI, STEPHAN
  • COVES, ANGELA
  • GIMENO MARTINEZ, BENITO
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] The dispersion diagram of infinite periodic structures is useful for the practical design of waveguide filters. Starting from the dispersion diagram of a unit cell, it is possible to generate a finite structure with very similar pass- and stop-bands (gaps). However, truncation of the infinite periodic structure degrades the pass-band performance. In this paper, these impairments are overcome by means of suitable waveguide tapers matching the impedance of the periodic structure to the access ports. As a result, the design of practical low-pass filters, derived from passive structures based on Electromagnetic Band-Gap (EBG) waveguides periodically loaded with metal ridges, is successfully addressed. According to this procedure, a five-order and an eight-order EBG low-pass filters are obtained after an optimization step. Measurements of a manufactured prototype fully validate the proposed approach., This work was supported by the Ministerio de Economía y Competitividad (MINECO), Spanish Government, under the R&D projects TEC2013-47037-C5-1-R and TEC2013-47037-C5-4-R. The authors would like to thank ITACA (Instituto de Aplicaciones de las Tecnologías y de las Comunicaciones Avanzadas), from Technical University of Valencia (Valencia, Spain), for their support in the accurate manufacturing of the low-pass filter prototype
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design of Hybrid Folded Rectangular Waveguide Filters With Transmission Zeros Below the Passband

  • Carceller Candau, Carlos
  • Guglielmi, Marco
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
The design and physical implementation of hybrid folded rectangular waveguide filters providing multiple transmission zeros (TZs) below the passband are considered in this paper. These structures offer great flexibility to locate the TZs in a wide frequency range. Different implementations have been considered, each one offering certain advantages in terms of ease of manufacture, number of TZs, and their separation from the passband. A simple design procedure is also described. Measurements of a manufactured five-pole filter prototype and simulations fully validate the novel configurations proposed in this study., This work was supported by the Spanish Ministerio de Economia y Competitividad under Reseach and Development Project TEC2013-47037-C5-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Segmentation strategy for the efficient analysis and design of substrate integrated waveguide directly coupled cavity filters

  • Martínez-Zamora, Juan Ángel
  • Belenguer, Ángel
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
In this study, a new segmentation strategy is presented for the full-wave analysis of directly coupled cavity filters in substrate integrated waveguide (SIW) technology. The whole SIW filter is enclosed inside an external fictitious rectangular waveguide, which does not affect the propagation inside the SIW assuming that the SIW is well designed and there is no significant power leakage. The external rectangular waveguide allows to easily segment the structure into building blocks that are composed of circular metallic vias inside a rectangular waveguide. The generalised scattering matrix of these building blocks is obtained with highly efficient techniques specifically suited for the analysis of H-plane rectangular waveguide devices. Some building blocks are repeated along the structure, and their scattering matrix has to be computed only once. The scattering matrices of all the building blocks are cascaded and the scattering matrix of the whole filter is obtained. A SIW filter of eight coupled cavities with a bandpass response centred at 11 GHz is analysed. Results from this analysis show that the computational time has been significantly reduced when compared with other specific SIW analysis methods or with commercial general purpose software, while maintaining a good accuracy., This work was funded by the Ministerio de Economia y Competitividad of the Spanish Government under the project number TEC2013-47037-C5-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Empty substrate integrated waveguide technology for E plane high-frequency and high-performance circuits

  • Belenguer, Ángel
  • Cano, Juan Luis
  • Artal, Eduardo
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] Substrate integrated circuits (SIC) have attracted much attention in the last years because of their great potential of low cost, easy manufacturing, integration in a circuit board, and higher-quality factor than planar circuits. A first suite of SIC where the waves propagate through dielectric have been first developed, based on the well-known substrate integrated waveguide (SIW) and related technological implementations. One step further has been made with a new suite of empty substrate integrated waveguides, where the waves propagate through air, thus reducing the associated losses. This is the case of the empty substrate integrated waveguide (ESIW) or the air-filled substrate integrated waveguide (air-filled SIW). However, all these SIC are H plane structures, so classical H plane solutions in rectangular waveguides have already been mapped to most of these new SIC. In this paper a novel E plane empty substrate integrated waveguide (ESIW-E) is presented. This structure allows to easily map classical E plane solutions in rectangular waveguide to this new substrate integrated solution. It is similar to the ESIW, although more layers are needed to build the structure. A wideband transition (covering the frequency range between 33 GHz and 50 GHz) from microstrip to ESIW-E is designed and manufactured. Measurements are successfully compared with simulation, proving the validity of this new SIC. A broadband high-frequency phase shifter (for operation from 35 GHz to 47 GHz) is successfully implemented in ESIW-E, thus proving the good performance of this new SIC in a practical application., This work was supported by the Ministerio de Economia y Competitividad, Spanish Goverment, under research projects TEC2013-47037-C5-3-R, TEC2013-47037-C5-1-R, AYA2013-49759-EXP, and CSD2010-00064. All the data related with this work can be requested to H. Esteban writing to hesteban@dcom.upv.es
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automated design of balanced wideband bandpass filters based on mirrored stepped impedance resonators (SIRs) and interdigital capacitors

  • Sans, Marc
  • Selga, Jordi
  • Vélez, París
  • Rodriguez Perez, Ana Maria
  • Bonache, Jordi
  • Martin, Ferran
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This paper presents small balanced bandpass filters exhibiting wide differential-mode pass bands and high common-mode suppression. The filters are implemented in microstrip technology and their topology consists of multisection mirrored stepped impedance resonators (SIRs) alternating with mirrored interdigital capacitors. The mirrored SIRs provide the required common-mode transmission zeros to achieve effective rejection of that mode in the region of interest, i.e. the differential-mode pass band. An automated design method for such filters, based on aggressive space mapping, is reported. The method uses the equivalent circuit model of both the mirrored SIRs and the interdigital capacitors, and filter synthesis is based on a quasi-Newton iterative algorithm where parameter extraction is the key aspect. The automated design approach is illustrated through an order-3 filter, where it is demonstrated that the filter topology is generated from the specifications. As compared with previous balanced filters based on mirrored SIRs coupled through admittance inverters, the proposed filters of this work are smaller and the design method is simplified, since bandwidth compensation due to the narrowband functionality of the inverters is avoided., This work was supported by MINECO-Spain (projects no. TEC2013-47037-C5-1-R, TEC2013-40600-R, and TEC2013-49221-EXP), Generalitat de Catalunya (project no. 2014SGR-157), and Institucio Catalana de Recerca i Estudis Avancats (who has awarded Ferran Martin).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of slow-wave structures based on capacitive-loaded lines through aggressive space mapping (ASM)

  • Orellana, M.
  • Selga, J.
  • Sans, M.
  • Rodriguez Perez, Ana Maria
  • Martín Antolín, Juan Fernando
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This article is focused on the automated synthesis of slow-wave structures based on microstrip lines loaded with patch capacitors. Thanks to the presence of the shunt capacitors, the effective capacitance of the line is enhanced, and the phase velocity of the structure can be made significantly smaller than the one of the unloaded line. The target is to achieve the layout of the slow-wave structure able to provide the required slow-wave ratio, characteristic (Bloch) impedance and electrical length (i.e., the usual specifications in the design of slow-wave transmission lines). To this end, a two-step synthesis method, based on the aggressive space mapping (ASM) algorithm, is proposed for the first time. Through the first ASM algorithm, the circuit schematic providing the target specifications is determined. Then, the second ASM optimizer is used to generate the layout of the structure. To illustrate the potential of the proposed synthesis method, three application examples are successfully reported. The two-step ASM algorithm is able to provide the layout of the considered structures from the required specifications, without the need of an external aid in the process., This work has been supported by MINECO-Spain (projects TEC2010-17512 METATRANSFER, TEC2010-21520-C04-01, TEC2013-47037-C5-1-R, CONSOLIDER EMET CSD2008-00066, TEC2013-40600-R and TEC2013-49221-EXP), Generalitat de Catalunya (project 2014SGR-157), Institucio Catalana de Recerca i Estudis Avancats (who has awarded Ferran Martin) and FEDER Funds. Marco Orellana acknowledges the support of the Universidad de Costa Rica, MICITT and CONICIT to study at the Univesitat Autonoma de Barcelona.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Capacitive Obstacle Realizing Multiple Transmission Zeros for In-Line Rectangular Waveguide Filters

  • Carceller Candau, Carlos
  • Guglielmi, Marco
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This paper presents a capacitive obstacle for rectangular waveguide filters capable of realizing multiple transmission zeros (TZs). By combining a capacitive window with multiple thin stubs, a filter designer has the ability to control the total coupling implemented by the obstacle, and the frequency location of the TZs generated. The resulting structure is compact, and can be employed at the input/output and intermediate stages of direct-coupled-resonator filters. This letter includes a parametric analysis of the obstacle and practical design guidelines. To validate its practical application, an in-line five-pole filter realizing three TZs has been successfully realized., This work was supported by the Spanish Ministerio de Economia y Competitividad under R&D project TEC2013-47037-C5-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Highly Versatile Coplanar Waveguide Line With Electronically Reconfigurable Bandwidth and Propagation Characteristics

  • Martinez Cano, Leticia
  • Lucas Borja, Alejandro
  • Belenguer, Angel
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This paper describes a coplanar waveguide coupled to two split-ring resonators that, in turn, are loaded with two different reactive elements. By these means, balanced composite right/left-handed-like (CRLH-like) and also dual balanced CRLH-like (D-CRLH-like) responses can be obtained with the same structure showing opposite propagation characteristics. This behavior is achieved by simply varying one of the reactive elements, i.e., the capacitive or inductive load. The physical behavior of these transmission lines has been successfully explained by means of a single equivalent circuit. Besides, the proposed transmission lines have an extended bandwidth due to the balanced nature of the structure. The bandwidth of these lines can be electronically controlled using varactor diodes reverse-biased by an external dc voltage. Thus, a reconfigurable cell with CRLH-like and D-CRLH-like propagation has been designed and manufactured. The simulated and measured results show fractional bandwidths from 0% (no transmission) to 9.3% for simulations and from 0% (no transmission) to 8.7% for measurements. Undoubtedly, these new proposed transmission lines will be useful for designing reconfigurable devices that can be used in future communication systems such as radar, wireless applications, global positioning systems, or radio-frequency identification systems, among others., This work was supported by the Ministerio de Economia y Competitividad, Spanish Government, under Research Project TEC2013-47037-C05-3-R and Research Project TEC2013-47037-C05-1-R and by the Ministerio de Educacion, Cultura y Deporte under the Fellowship Program for Training University Professors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design of planar wideband bandpass filters from specifications using a two-step aggressive space mapping (ASM) optimization algorithm

  • Sans, Marc
  • Selga, Jordi
  • Rodríguez Pérez, Ana María
  • Bonache, Jordi
  • Martín, Ferran
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This paper is focused on the automated and unattended optimization of a type of planar wideband bandpass filters by means of aggressive space mapping (ASM). The considered filters are microstrip filters implemented through a combination of shunt connected stepped impedance resonators (SIRs) and grounded stubs coupled through admittance inverters. The most relevant and novel aspect of this paper is the fact that the filter layout is automatically generated from filter specifications, i.e., central frequency, fractional bandwidth, in-band ripple and order, without the need of any external aid to the design process. To achieve this layout generation, filter optimization has been divided into two independent ASM processes. The first one generates the filter schematic (circuit element values) providing the required specifications. This first iterative process is necessary since, due to the narrow band operation of the admittance inverters, the target specifications are achieved by compensating the effects of such narrow band operation. The purpose of the second ASM algorithm is to automatically generate the layout from the filter schematic resulting from the first ASM process. To validate the new two-step ASM optimization tool, two sets of filter specifications (inputs of the developed tool), are considered. The generated filter layouts exhibit frequency responses that satisfy the specifications, and are in excellent agreement with the responses of the schematics., This work was supported by MINECO-Spain (projects TEC2010-17512 METATRANSFER, TEC2010-21520-C04-01 and TEC2013-47037-C5-1-R, CONSOLIDER EMET CSD2008-00066, TEC2013-40600-R and TEC2013-49221-EXP), Generalitat de Catalunya (project 2014SGR-157), and Institucio Catalana de Recerca i Estudis Avancats (who has awarded F. Martin). This paper was presented in part at the IEEE MTT-S International Microwave Symposium, Tampa Bay, FL, USA, June 1-6, 2014.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On Multimode Equivalent Network Representation of Finite Arrays of Open-Ended Waveguides

  • Sánchez-Escuderos, Daniel
  • Guglielmi, Marco
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This communication describes a multimode equivalent network (MEN) representation of a finite array of open-ended lossless waveguides on an infinite ground plane. The derivation is based on an integral equation formulated at the interface between the waveguides and the free-space region. The MEN is formulated using the concept of accessible and localized modes, and includes ports for the free-space plane waves. The MEN derived can be easily combined with the MENs of other microwave components, thus allowing for the accurate analysis and design of more complex systems composed of waveguide elements and radiating apertures. Both simulated and experimental results are presented showing a very good agreement, thereby fully validating the proposed equivalent network representation., This work was supported in part by the Spanish Ministry of Economics and Competitiveness under Project TEC2013-47360-C3-3-P, Project TEC2016-79700-C2-1-R, Project TEC2016-78028-C3-3-P, Project TEC2013-47037-C5-1-R, and Project TEC2016-75934-C4-1-R and in part by the Generalitat Valenciana under Project GV/2015/065.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-Performance Coplanar Waveguide to Empty Substrate Integrated Coaxial Line Transition

  • Belenguer Martínez, Ángel
  • Borja, A.L.
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
Recently, a new empty coaxial structure, entirely built with printed circuit boards, has been proposed. The resulting coaxial line has low radiation, low losses, high-quality factor, and is nondispersive. Up to now, this coaxial line has not been completely integrated in a planar substrate, since a working transition to a traditional planar line has not been defined yet. Therefore, in this paper, a high-quality transition from coplanar waveguide to this new empty coaxial line is proposed. With this transition, the coaxial line is completely integrated in a planar circuit board, so that it truly becomes an empty substrate-integrated coaxial line. The proposed transition has been fabricated. Both full-wave simulated and measured results show an excellent agreement. Therefore, the proposed transition is suitable to develop completely substrate-integrated components for applications in wideband communication systems that require very high quality responses and protection from external interferences. To show this fact, this new transition has been applied to integrate a high-performance empty coaxial filter in a planar substrate. The measured response of this filter is excellent, and proves the goodness of the proposed transition that has enabled, for the first time, the complete integration of an empty coaxial line in a planar substrate., This work was supported by the Ministerio de Economia y Competitividad, Spanish Goverment under Research Projects TEC2013-47037-C5-3-R and TEC2013-47037-C5-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design of Compact Wideband Manifold-Coupled Multiplexers

  • Carceller Candau, Carlos
  • GUGLIELMI, MARCO
  • Gil Raga, Jordi
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
The design of manifold-coupled multiplexers for wideband applications is considered in this paper. A systematic procedure, based on the sequential connection of filters to the manifold and subsequent adjustment of the interconnection elements, is presented. The filters are attached to the manifold without using stubs in order to minimize the effect of spurious resonances. The interconnection elements, the manifold, and the remaining filters are considered as the first inverter of each new filter that is attached. This technique has been applied to several practical examples. The obtained results validate the proposed design methodology., This work was supported by the Spanish Ministerio de Economi-a y Competitividad under Research and Development Project TEC2013-47037-C5-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Compact Dual-Mode Substrate Integrated Waveguide Coaxial Cavity for Bandpass Filter Design

  • Sánchez-Soriano, Miguel Ángel
  • Sirci, Stefano
  • Martínez Pérez, Jorge Daniel|||0000-0002-7119-3714
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This letter proposes a new compact filtering building block. It consists of two via holes embedded into a substrate integrated waveguide (SIW) cavity connected to capacitive metal patches at the top layer. This topology provides two coaxial modes performing a doublet filtering configuration. The proposed dualmode SIWcoaxial cavity is studied in detail and guidelines for the filter design are given. As will be shown, the proposed building block presents a high degree of design flexibility, which allows for the design of multiple kind of bandpass filter (BPF) responses, including both narrow- and wide-band BPFs along with transmission zero generation. As a verification, several filters are designed and implemented at 8 GHz., This work has been supported in part by MINECO (Spanish Government) under projects TEC2013-47037-C5-1-R and TEC2013-48036-C3-3-R, and by a "Juan de la Cierva" Research fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Systematic Procedure to Avoid Unintended Polarity Mismatch in the Cascade Connection of Multiport Devices with Symmetric Feeding Lines

  • Belenguer Martínez, Ángel
  • Borja, A.L.
  • Díaz Caballero, Elena
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
The traditional cascading of generalised scattering matrices (GSMs) assumes that the modal sets at the connected ports of a cascaded network are strictly equal. This implies a careful selection of the modal polarities, or the reference systems, of every port. Usually, the connection scheme of every device is known a priori. Then, the individual GSMs are pre-processed, or auxiliary devices, which correct possible modal mismatches at the ports, are included in appropriate positions among the cascade, so that the traditional cascading-by-pairs approach can be directly applied. This scheme clearly complicates the reutilisation of previously calculated GSMs, and mixes the cascading with the solution of the individual building blocks. In this study, a systematic procedure is proposed to define the polarity of the modes at the ports of a device fed with transmission lines or waveguides showing a single or double symmetry. The modified expressions to calculate the scattering parameters of the cascade of two multiport devices, incorporating the regular modal corrections to apply when this criterion is used to define the modal polarity at the ports, is also presented in this study. This strategy is more convenient from the point of view of programming, less error-prone and easier to implement., This work was supported by the Ministry of Science and Innovation, Spanish Government, under Research Projects TEC2013-47037-C05-3-R and TEC2013-47037-C05-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-Power Multicarrier Generation for RF Breakdown Testing

  • Monerris Belda, Óscar
  • Díaz Caballero, Elena
  • Gimeno Martinez, Benito
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
Testing of satellite components for high RF power breakdown effects, such as multipactor and corona or passive-intermodulation, is a topic of growing interest in the aerospaceindustry. Switching fromthe classical single carrier approach to the more realisticmulticarrier scenario is very challenging from the experimental point of view. Themulticarrier signals, amplifiedby several RF power amplifiers, need to have controlled phase, amplitude, and frequency in each carrier. Fine tuning of the signal generator phases is required in order to compensate the phase drift occurring in the active elements of the test bed. This paper presents an efficient and low-cost technique to generate multicarrier signals, valid for testing vacuum breakdown phenomena in satellite components., This work was supported in part by the European High RF Power Space Laboratory of European Space Agency and Val Space Consortium, Laboratory co-Funded by the European Regional Development Fund and in part by the Ministerio de Economia y Competitividad, Spanish Government, under the Research Project TEC 2013-47037-C5-1-R and Project TEC 2013-47037-C5-4-R. The review of this paper was arranged by Editor L. Kumar.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microstrip Filters with Enhanced Stopband Based on Lumped Bisected Pi-Sections with Parasitics

  • Marín-Martínez, Sandra
  • Valero, Clara Isabel
  • Martínez Pérez, Jorge Daniel|||0000-0002-7119-3714
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] A procedure for improving the stopband response of planar bandpass filters is presented in this letter. The technique is based on the introduction of transmission zeros by using lumpedelement bisected-pi sections at the filter input/output. As an example, a 3¿pole 10% FBW bandpass filter with Chebyshev response centered at 1 GHz, based on strongly loaded combline microstrip resonators has been designed, manufactured and measured. The proposed solution can be used on any planar topology in order to improve the stopband performance with a negligible additional footprint., This work was supported in part by MINECO (Spanish Government) under project TEC2013-48036-C3-3-R and TEC2013-47037-C5-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-Performance Compact Diplexers for Ku/K-Band Satellite Applications

  • Teberio, Fernando
  • Arregui, Iván
  • Laso, Miguel A.G.
  • Guglielmi, Marco
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] In this paper, two novel compact diplexers for satellite applications are presented. The first covers the Ku-band with two closely spaced channels (Ku-transmission band: 10.7-13 GHz and Ku-reception band: 13.75-14.8 GHz). The second is wider than the first (overall bandwidth up to 50%) achieves the suppression of the higher order modes, and covers the Ku/K-band with a reception channel between 17.2 and 18.5 GHz. Both diplexers are composed of two novel bandpass filters, joined together with an E-plane T-junction. The bandpass filters are designed by combining a low-pass filtering function (based lambda/4-step-shaped band-stop elements separated by very short waveguide sections) and a high-pass filtering structure (based on the waveguide propagation cutoff effect). The novel diplexers show a very compact footprint and very relaxed fabrication tolerances, and are especially attractive for wideband applications. A prototype Ku/K-band diplexer has also been fabricated by milling. Measurements show a very good agreement with simulations, thereby demonstrating the validity and manufacturing robustness of the proposed topology., The authors would like to thank the European High RF Power Space Laboratory, European Space Agency and Val Space Consortium for contributing with its measuring installations-Laboratory co-funded by the European Regional Development Fund-A way of making Europe. This work was supported by the Spanish Ministry of Economy and Competitiveness under Project TEC2014-55735-C3-R and Project TEC2013-47037-C5-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multilevel transition in empty substrate integrated waveguide

  • Morro, J. V.|||0000-0002-4699-6208
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Rodriguez Perez, Ana Maria
  • Belenguer Martínez, Ángel
Empty substrate integrated waveguide (ESIW) is an improvement of the well-known substrate integrated waveguide. While maintaining the low cost, easy manufacturing, small size, and integration with other circuits in the same substrate, ESIW decreases the related losses by removing the dielectric substrate, thus rendering it more interesting for practical applications. A wide band transition has been already developed to connect ESIW to microstrip lines. Filters, couplers, and antennas have also been developed in ESIW. For multilevel configurations, where different ESIW devices are implemented in different stacked substrates, a transition is needed that connects ESIW lines in different substrate levels. A low reflection wideband transition is presented for connecting two stacked ESIW lines., This work was supported by the Ministerio de Economia y Competitividad, Spanish Goverment, under Research Projects TEC2013-47037-C05-3-R and TEC2013-47037-C05-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Substrate Integrated Waveguide Diplexer Based on Circular Triplet Combline Filters

  • Sirci, Stefano
  • Martínez Pérez, Jorge Daniel|||0000-0002-7119-3714
  • Vague Cardona, José Joaquín|||0000-0001-5935-3116
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
The design of substrate integrated waveguide (SIW) diplexers, based on combline triplet sections with transmission zeros (TZs) placed below and above the passband, is presented. In order to control the location of the TZs, positive and negative couplings are conveniently provided. A highly compact implementation based on circular substrate integrated coaxial resonators is proposed. An X band diplexer with channel center frequencies at 9.5 and 10.5 GHz and absolute bandwidths of 400 MHz is designed. The structure shows important advantages in terms of size reduction, while keeping good insertion losses as well as high rejection and isolation levels., This work was supported by MINECO (Spanish Government) under projects TEC2103-47037-C5-1-R and TEC2013-48036-C3-3-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design of Narrow-Band Dielectric Frequency-Selective Surfaces for Microwave Applications

  • Coves, Angela
  • Marini, Stephan
  • Gimeno, Benito
  • Sánchez-Escuderos, Daniel
  • Rodriguez Perez, Ana Maria
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
Two types of narrow-band dielectric frequency-selective surfaces (DFSSs) have been designed at microwave frequencies. First, a DFSS showing total reflection has been analysed under guided-mode resonance conditions, based on a single dielectric grating which is illuminated by a TM polarised two-dimensional plane wave at Brewster-angle incidence, presenting extremely low-reflectance sidebands adjacent to the resonance peak. Second, a DFSS exhibiting total transmission at normal TE incidence has been designed, by superimposing the resonance condition of a dielectric grating on the classical high-reflectance response of a periodic (band-gap based) structure formed by alternating homogeneous dielectric layers. Finally, the oblique incidence and polarisation effects on the spectral response of the designed DFSSs have been also studied. In addition, dielectric ohmic losses and the problem of the finite size of the periodic structures have been accounted for in both structures. The obtained results have been successfully validated with the commercial software tool high frequency structure simulator., This work was supported in part by Ministerio de Economia y Competitividad (MINECO) under Coordinated Project TEC2013-47037-C5.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Compensation of the impact of low-cost manufacturing techniques in the design of E-plane multiport waveguide junctions

  • San Blas Oltra, Ángel Antonio
  • Roca, J. M.
  • Morro, J. V.
  • Gimeno Martinez, Benito
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
In this work, a full-wave tool for the accurate analysis and design of compensated E-plane multiport junctions is proposed. The implemented tool is capable of evaluating the undesired effects related to the use of low-cost manufacturing techniques, which are mostly due to the introduction of rounded corners in the cross section of the rectangular waveguides of the device. The obtained results show that, although stringent mechanical effects are imposed, it is possible to compensate for the impact of the cited low-cost manufacturing techniques by redesigning the matching elements considered in the original device. Several new designs concerning a great variety of E-plane components (such as right-angled bends, T-junctions and magic-Ts) are presented, and useful design guidelines are provided. The implemented tool, which is mainly based on the boundary integral-resonant mode expansion technique, has been successfully validated by comparing the obtained results to simulated data provided by a commercial software based on the finite element method., All the data necessary to understand, evaluate, replicate, and generate the figures and results presented in this paper have been included in the present manuscript. A full-wave custom code and the commercial software Ansys HFSS have been used to generate the simulated results provided by the authors. This work was supported by the Ministerio de Economia y Competitividad, Spanish Government, under the Research Projects TEC2013-47037-C5-1-R and TEC2013-47037-C5-4-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design and Multiphysics Analysis of Direct and Cross-Coupled SIW Combline Filters Using Electric and Magnetic Couplings

  • Sirci, Stefano
  • Sánchez Soriano, Miguel Ángel
  • Gentili, Fabrizio
  • Boesch, W.
  • Sorrentino, Roberto
  • Martínez Pérez, Jorge Daniel|||0000-0002-7119-3714
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
In this paper, combline substrate integrated waveguide (SIW) filters using electric and magnetic couplings are thoroughly studied. Thus, a negative coupling scheme consisting on an open-ended coplanar probe is proposed and analyzed in detail. Several in-line 3-pole filters at C-band are designed, manufactured and measured showing how the presented approach can be used for implementing direct couplings while enabling an important size reduction and improved spurious-free band compared to conventional magnetic irises. A fully-packaged quasi-elliptic 4-pole filter is also designed at 5.75 GHz showing how the negative coupling structure can be used for introducing transmission zeros by means of cross-couplings between non-adjacent resonators. Finally, average and peak power handling capabilities of these filters have been also analyzed from a multiphysics point of view. Measured results validate the theoretical predictions confirming that combline SIW filters can handle significant levels of continuous and peak power, providing at the same time easy integration, compact size and advanced filtering responses., This work was supported in part by MINECO (Spanish Government) under projects TEC2013-47037-C5-1-R and TEC2013-48036-C3-3-R. This paper is an expanded version from the IEEE MTT-S International Microwave Symposium, Phoenix, AZ, USA, May 17-22, 2015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Flexible and Efficient Computer-Aided Design (CAD) Tool for Advanced Comb-Line Rectangular Waveguide Filters

  • San Blas Oltra, Ángel Antonio
  • Müller, Andrei
  • Mira Pérez, Fermín Elías
  • Pérez Soler, Francisco Javier
  • Gimeno Martinez, Benito
  • Vidal Pantaleoni, Ana|||0000-0002-3853-6260
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] A very flexible and efficient computer-aided design (CAD) tool, specifically suited for advanced comb-line rectangular waveguide filters, is presented in this work. The developed software tool, which makes use of a full-wave analysis technique based on the Boundary Integral-Resonant Mode Expansion method, allows loading the considered comb-line resonators with any number of radially symmetrical partial-height metallic posts. The implemented CAD tool also allows dealing with coupling windows of arbitrary cross-section, thus drastically enhancing the flexibility of the CAD process. The excitation of the analyzed components, which is performed using generalized coaxial probes, has also been integrated in the implemented software tool, thus achieving a full-wave electromagnetic characterization of the whole component. Furthermore, a novel simple procedure to efficiently connect all the obtained wide-band matrices is proposed. To validate the accuracy and efficiency of this novel CAD tool, several new designs concerning advanced band-pass comb-line waveguide filters are presented. The accuracy of the developed CAD tool has been successfully validated by comparing the obtained results with numerical data provided by a commercial tool based on the finite-element method. (C) 2015 Wiley Periodicals, Inc., This work has been supported by the Ministerio de Economia y Competitividad, Spanish Government, under the Research Projects TEC2013-47037-C5-1-R and TEC2013-47037-C5-4-R, as well as by the FP7 PCIG11-2012-322162 Marie Curie CIG grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of Multipactor RF Breakdown in a Waveguide Containing a Transversely Magnetized Ferrite

  • Gonzalez Iglesias, Daniel
  • Gomez, Alvaro
  • Gimeno Martinez, Benito
  • Fernández, o.
  • Vegas, A.
  • Casas, Fernando
  • Anza Hormigo, Sergio
  • Vicente Quiles, Carlos Pascual
  • Gil Raga, Jordi
  • Mata Sanz, Rafael
  • Montero, Isabel
  • Raboso García-Baquero, David
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
In this paper, the multipactor RF breakdown in a parallel-plate waveguide partially filled with a ferrite slab magnetized normal to the metallic plates is studied. An external magnetic field is applied along the vertical direction between the plates in order to magnetize the ferrite. Numerical simulations using an in-house 3-D code are carried out to obtain the multipactor RF voltage threshold in this kind of structures. The presented results show that the multipactor RF voltage threshold at certain frequencies becomes considerably lower than for the corresponding classical metallic parallel-plate waveguide with the same vacuum gap, This work was supported in part by the European Space Agency under Novel Investigation in Multipactor Effect in Ferrite and other Dielectrics used in high power RF Space Hardware under Contract AO 1-7551/13/NL/GLC, in part by the Spanish Government under Coordinated R&D Project TEC2013- 47037-5-R and Project TEC2014-55463-C3-3-P, and in part by the European Commission (ERDF). The review of this paper was arranged by Editor R. Carter.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Study of Periodic Dielectric Frequency-selective Surfaces under 3D Plane Wave Incidence

  • Coves Soler, Ángela María
  • Marini, Stephan
  • Gimeno Martínez, Benito
  • Boria Esbert, Vicente Enrique
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
A periodic Dielectric Frequency-Selective Surface (DFSS) is studied under 3D plane-wave incidence, whose unit cell in the periodic direction is composed of a dielectric grating and a homogeneous dielectric layer. The structure is excited by a linearly polarized plane-wave. The procedure for computing the Brillouin diagram of the structure under 2D plane-wave incidence with TE or TM polarization was already described by the authors, and the extension to the 3D incidence case has been performed in a similar way. Following the same formalism, it has been obtained the Generalized Scattering Matrix (GSM) of one period of the infinite periodic lattice. This requires the knowledge of the modal spectrum in both homogeneous and periodic dielectric media. To this end, a numerical technique based on a vectorial modal method originally proposed by the authors has been used. Once the S matrix of one period of the periodic medium is computed, the corresponding generalized ABCD matrix of the unit cell can be easily derived, which provides a standard multimodal eigenvalue matrix problem whose solution yields the transverse field distributions and the modal propagation constants in the periodic lattice. In the 3D incidence case, a given number of modes considered in the construction of the ABCD matrix yields the dispersion diagram of TE and TM modes simultaneously. The identification of the modes can be easily performed through the comparison of their dispersion diagram with the reflectance spectra of the structure under a given incidence polarization (TE or TM). Finally, some numerical result effects, varying the incidence direction of the exciting plane-wave in the dispersion diagram of an Electromagnetic Band Gap (EBG) material, are shown.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Design and Multiphysics Analysis of Direct and Cross-Coupled SIW Combline Filters Using Electric and Magnetic Couplings

  • Sirci, Stefano
  • Sánchez-Soriano, Miguel Ángel
  • Martínez, Jorge D.
  • Boria Esbert, Vicente Enrique
  • Gentili, Fabrizio
  • Bösch, Wolfgang
  • Sorrentino, Roberto
  • Sánchez-Soriano, Miguel Ángel|||/items/b47af293-b2ab-4567-88b8-66decd71861b
In this paper, combline substrate integrated waveguide (SIW) filters using electric and magnetic couplings are thoroughly studied. Thus, a negative coupling scheme consisting on an open-ended coplanar probe is proposed and analyzed in detail. Several in-line 3-pole filters at C-band are designed, manufactured and measured showing how the presented approach can be used for implementing direct couplings while enabling an important size reduction and improved spurious-free band compared to conventional magnetic irises. A fully-packaged quasi-elliptic 4-pole filter is also designed at 5.75 GHz showing how the negative coupling structure can be used for introducing transmission zeros by means of cross-couplings between non-adjacent resonators. Finally, average and peak power handling capabilities of these filters have been also analyzed from a multiphysics point of view. Measured results validate the theoretical predictions confirming that combline SIW filters can handle significant levels of continuous and peak power, providing at the same time easy integration, compact size and advanced filtering responses.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Compact Dual-Mode Substrate Integrated Waveguide Coaxial Cavity for Bandpass Filter Design

  • Sánchez-Soriano, Miguel Ángel
  • Sirci, Stefano
  • Martínez, Jorge D.
  • Boria Esbert, Vicente Enrique
  • Sánchez-Soriano, Miguel Ángel|||/items/b47af293-b2ab-4567-88b8-66decd71861b
This letter proposes a new compact filtering building block. It consists of two via holes embedded into a substrate integrated waveguide (SIW) cavity connected to capacitive metal patches at the top layer. This topology provides two coaxial modes performing a doublet filtering configuration. The proposed dual-mode SIW coaxial cavity is studied in detail and guidelines for the filter design are given. As will be shown, the proposed building block presents a high degree of design flexibility, which allows for the design of multiple kind of bandpass filter (BPF) responses, including both narrow- and wide-band BPFs along with transmission zero generation. As a verification, several filters are designed and implemented at 8 GHz.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Design of narrow-band dielectric frequency-selective surfaces for microwave applications

  • Coves Soler, Ángela María
  • Marini, Stephan
  • Gimeno Martínez, Benito
  • Sánchez, Daniel
  • Rodríguez, Ana
  • Boria Esbert, Vicente Enrique
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
Two types of narrow-band dielectric frequency-selective surfaces (DFSSs) have been designed at microwave frequencies. First, a DFSS showing total reflection has been analysed under guided-mode resonance conditions, based on a single dielectric grating which is illuminated by a TM polarised two-dimensional plane wave at Brewster-angle incidence, presenting extremely low-reflectance sidebands adjacent to the resonance peak. Second, a DFSS exhibiting total transmission at normal TE incidence has been designed, by superimposing the resonance condition of a dielectric grating on the classical high-reflectance response of a periodic (band-gap based) structure formed by alternating homogeneous dielectric layers. Finally, the oblique incidence and polarisation effects on the spectral response of the designed DFSSs have been also studied. In addition, dielectric ohmic losses and the problem of the finite size of the periodic structures have been accounted for in both structures. The obtained results have been successfully validated with the commercial software tool high frequency structure simulator.