Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-Performance Compact Diplexers for Ku/K-Band Satellite Applications

  • Teberio, Fernando
  • Arregui, Iván
  • Laso, Miguel A.G.
  • Guglielmi, Marco
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] In this paper, two novel compact diplexers for satellite applications are presented. The first covers the Ku-band with two closely spaced channels (Ku-transmission band: 10.7-13 GHz and Ku-reception band: 13.75-14.8 GHz). The second is wider than the first (overall bandwidth up to 50%) achieves the suppression of the higher order modes, and covers the Ku/K-band with a reception channel between 17.2 and 18.5 GHz. Both diplexers are composed of two novel bandpass filters, joined together with an E-plane T-junction. The bandpass filters are designed by combining a low-pass filtering function (based lambda/4-step-shaped band-stop elements separated by very short waveguide sections) and a high-pass filtering structure (based on the waveguide propagation cutoff effect). The novel diplexers show a very compact footprint and very relaxed fabrication tolerances, and are especially attractive for wideband applications. A prototype Ku/K-band diplexer has also been fabricated by milling. Measurements show a very good agreement with simulations, thereby demonstrating the validity and manufacturing robustness of the proposed topology., The authors would like to thank the European High RF Power Space Laboratory, European Space Agency and Val Space Consortium for contributing with its measuring installations-Laboratory co-funded by the European Regional Development Fund-A way of making Europe. This work was supported by the Spanish Ministry of Economy and Competitiveness under Project TEC2014-55735-C3-R and Project TEC2013-47037-C5-1-R.
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

High temporal resolution refractivity retrieval from radar phase measurements

  • Nocelo López, Rubén
  • Santalla del Río, Maria Veronica
Knowledge of the spatial and temporal variability of near-surface water vapor is of great importance to successfully model reliable radio communications systems and forecast atmospheric phenomena such as convective initiation and boundary layer processes. However, most current methods to measure atmospheric moisture variations hardly provide the temporal and spatial resolutions required for detection of such atmospheric processes. Recently, considering the high correlation between refractivity variations and water vapor pressure variations at warm temperatures, and the good temporal and spatial resolution that weather radars provide, the measurement of the refractivity with radar became of interest. Firstly, it was proposed to estimate refractivity variations from radar phase measurements of ground-based stationary targets returns. For that, it was considered that the backscattering from ground targets is stationary and the vertical gradient of the refractivity could be neglected. Initial experiments showed good results over flat terrain when the radar and target heights are similar. However, the need to consider the non-zero vertical gradient of the refractivity over hilly terrain is clear. Up to date, the methods proposed consider previous estimation of the refractivity gradient in order to correct the measured phases before the refractivity estimation. In this paper, joint estimation of the refractivity variations at the radar height and the refractivity vertical gradient variations using scan-to-scan phase measurement variations is proposed. To reduce the noisiness of the estimates, a least squares method is used. Importantly, to apply this algorithm, it is not necessary to modify the radar scanning mode. For the purpose of this study, radar data obtained during the Refractivity Experiment for H2O Research and Collaborative Operational Technology Transfer (REFRACTT_2006), held in northeastern Colorado (USA), are used. The refractivity estimates obtained show a good performance of the algorithm proposed compared to the refractivity derived from two automatic weather stations located close to the radar, demonstrating the possibility of radar based refractivity estimation in hilly terrain and non-homogeneous atmosphere with high spatial resolution., Ministerio de Economía y Competitividad | Ref. TEC2014-55735-C3-3-R, Xunta de Galicia | Ref. GRC2015/019
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Propagation modeling for outdoor-to-indoor and indoor-to-indoor wireless links in high-speed train

  • Zhang, Lei
  • Rodríguez Piñeiro, José
  • Fernández, Jean Raphaël Olivier
  • García-Naya, José A.
  • Matolak, David W.
  • Briso-Rodríguez, Cesar
  • Castedo, Luis
This version of the article: Zhang, L., Rodríguez-Piñeiro, J., Fernández, J. R. O., García-Naya, J. A., Matolak, D. W., Briso, C., & Castedo, L. (2017). ‘Propagation modeling for outdoor-to-indoor and indoor-to-indoor wireless links in high-speed train’ has been accepted for publication in: Measurement, 110, 43–52. The Version of Record is available online at https://doi.org/10.1016/j.measurement.2017.06.014., [Abstract]: Nowadays telecommunication companies have shown a great interest in deploying broadband mobile wireless networks in high-speed trains (HSTs) with the aim of supporting both passenger services provisioning as well as automatic train control and signaling. The train carriage, as a confined steel structure, has specific propagation characteristics, which motivates the study of the indoor-to-indoor and outdoor-to-indoor radio propagation characteristics for broadband wireless communication systems in high-speed railways, constituting the main contribution of this work. This study has been performed by means of measurements considering an actual Long Term Evolution (LTE) network deployment, as well as a portable test transmitter and different configurations of antennas and receivers at 2.4, 2.6 and 5.7 GHz in a commercial high-speed rail line in Spain. The results show that radio waves incur obvious waveguiding effects inside the HST car. Moreover, for the propagation from the railway station to a mobile receiver inside the HST car, waves at higher frequencies experience less attenuation through the train carriage, by better propagating through windows. Although the railway station and train interior contain objects that induce a rich set of multipath components, the analysis of small-scale fading statistics shows that the channel still has a dominant path. Also, the LTE coverage tests for Base Transceiver Station (BTS)-Train and BTS-Mobile links were conducted and with internal and external antennas on board the train. We found that there was a strong signal penetration loss of approximately 26 dB caused by the train carriage structure. The final results constitute an initial model for the propagation incurred by a relay-based communications system for fourth generation (4G) network in railways., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01, This work has been developed under the framework of ENABLING 5G TEC2014-55735-C3-2-R funded by the Spanish Ministry of Economy and Competitiveness. This work has been also funded by the Xunta de Galicia (ED431C 2016-045, ED341D R2016/012 and ED431G/01), the Agencia Estatal de Investigación of Spain (TEC2013-47141-C4-1-R, TEC2015-69648-REDC and TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE). Financial support of the China Scholarship Council (CSC) research fellowship given to Lei Zhang is also acknowledged.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Synthesis of one dimensional electromagnetic bandgap structures with fully controlled parameters

  • Arnedo Gil, Israel
  • Chudzik, Magdalena
  • Percaz Ciriza, Jon Mikel
  • Arregui Padilla, Iván
  • Teberio Berdún, Fernando
  • Benito Pertusa, David
  • Lopetegui Beregaña, José María
  • Gómez Laso, Miguel Ángel
In this paper, we propose a novel synthesis strategy for the design of one dimensional electromagnetic bandgap (1- D-EBG) structures where all the performance parameters of these devices can fully be controlled, i.e., the central frequency of the forbidden band, its attenuation level and bandwidth, and the ripple level at the passbands. The novel synthesis strategy employs a new inverse-scattering technique to accurately synthesize the 1-D-EBG structure, targeting a properly interpolated version of a classical periodic filter fulfilling the required frequency specifications. The new inverse-scattering technique follows a continuous layer peeling approach and relies on the coupled-mode theory to precisely model the microwave structures. Telecommunication and radar systems, as well as material characterization devices, will be profited by this proposal with which enhanced filters, sensors, power dividers, couplers, mixers, oscillators, and amplifiers can be designed in many different technologies. As a proof of concept, a 1-D-EBG structure in microstrip technology with a single forbidden band (free of spurious stopband replicas), with attenuation level of 30 dB, fractional bandwidth larger than 100%, and return loss level at the passbands of 20 dB, has been designed and fabricated. The measurements obtained are in very good agreement with the simulations and target specifications, being free of spurious replicas up to the 15th harmonic, showing the robustness and very good performance of the novel design strategy proposed., This work was supported by MINECO (Spain) under Projects TEC2014-51902-C2-2-R and TEC2014-55735-C3-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Design procedure for new compact waffle-iron ilters with transmission zeros

  • Teberio Berdún, Fernando
  • Percaz Ciriza, Jon Mikel
  • Arregui Padilla, Iván
  • Martín Iglesias, Petronilo
  • Lopetegui Beregaña, José María
  • Gómez Laso, Miguel Ángel
  • Arnedo Gil, Israel
In this paper, a novel waffle-iron filter with transmission zeros at multiple frequencies, along with its design procedure, is presented. The proposed filter features a high-power behavior and a wide rejected band in a single compact structure by means of a set of transmission zeros that can also be placed close to the passband. Its design method rests on a divide-and-rule strategy, where the physical dimensions of the constituent design entities (DEs) can be easily computed in a very short time. A novel high-power compact waffle-iron filter with transmission zeros at multiple frequencies has been designed as well as several classical waffle-iron filters with transmission zeros at one frequency only, using a detailed step-by-step procedure which avoids the bruteforce optimizations needed until now. Multipactor and corona simulations have been conducted proving a high-power handling capability of 1.8 kW and 78.6 W, respectively. A prototype of the novel filter has been fabricated, obtaining a remarkable accordance between the simulated and measured results., This work was supported in part by the ESA’s Networking/Partnering Initiati ve under Contract 4000114859/15/NL/HK and in part by the MINECO (Spain) under Project TEC2017-85529-C3-2-R, Project TEC2014-55735-C3-R, and Project TEC2014-51902-C2-2-R. This paper is an expanded version from the 2018 International Microwave Sym- posium, Philadelphia, PA, USA, June 10–15 2018. (Corresponding author: Fernando Teberio.)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Chirping techniques to maximize the power-handling capability of harmonic waveguide low-pass filters

  • Teberio Berdún, Fernando
  • Arregui Padilla, Iván
  • Gómez Torrent, Adrián
  • Arnedo Gil, Israel
  • Chudzik, Magdalena
  • Zedler, Michael
  • Goertz, Franz-Josef
  • Jost, Rolf
  • Lopetegui Beregaña, José María
  • Gómez Laso, Miguel Ángel
A novel chirping technique is applied to the design of very high-power waveguide harmonic low-pass filters. The technique could be used, for instance, to avoid multipactor testing in multicarrier systems such as the output multiplexer of a communications satellite. The novel chirped filter shows low insertion loss, all higher order mode suppression, and broad stopband rejection up to the third harmonic. This paper focuses on the maximization of the filter power-handling capability without affecting its excellent frequency behavior. Given a certain frequency response, the E-plane mechanical gap of the structure and the length (in the propagation direction) of the waveguide sections between its constituent bandstop elements can be considered to improve the high-power behavior. However, the power performance may not be sufficient yet in some applications if we wish, for instance, multipactor testing to be avoided. This becomes feasible by chirping the length (in the propagation direction) of the bandstop elements. An example for Ku band is discussed for relevant frequency specifications. An improvement from ∼8 kW (non-chirped filter) to more than 100 kW (chirped filter) is obtained. As a reference, the equivalent waffle-iron filter can handle only 0.15 kW. Such high-power threshold levels have never been reported before for such kind of filters., This work was supported by the Spanish Ministry of Science and Innovation under Project TEC 2014-55735‐C3‐R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Routing with classical corrugated waveguide low-pass filters with embedded bends

  • Teberio Berdún, Fernando
  • Percaz Ciriza, Jon Mikel
  • Arregui Padilla, Iván
  • Martín Iglesias, Petronilo
  • Lopetegui Beregaña, José María
  • Gómez Laso, Miguel Ángel
  • Arnedo Gil, Israel
A very simple design method to embed routing capabilities in classical corrugated filters is presented in this paper. The method is based on the calculation of the heights and lengths of the so-called filters design building blocks, by means of a consecutive and separate extraction of their local reflection coefficients along the device. The proposed technique is proved with a 17th-order Zolotarev filter whose topology is bent twice so that the input and output ports are in the same plane while preserving the in-line filters behaviour. This new filter allows the possibility of eliminating subsequent bending structures, reducing the insertion loss, weight, and PIM., This work was supported by MINECO (Spain) (grant TEC2014-55735-C3-R, TEC2014-51902-C2-2-R, and TEC2017-85529-C3-2-R).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Resonant quasi-periodic structure for rectangular waveguide technology with wide stopband and band-pass behavior

  • Arregui Padilla, Iván
  • Teberio Berdún, Fernando
  • Arnedo Gil, Israel
  • Percaz Ciriza, Jon Mikel
  • Gómez Torrent, Adrián
  • Chudzik, Magdalena
  • Gómez Laso, Miguel Ángel
  • Lopetegui Beregaña, José María
In this paper, a novel quasi-periodic structure for rectangular waveguide technology is proposed. The constituent unit cells of the structure feature a resonant behavior, providing high attenuation levels in the stopband with a compact (small period) size. By applying a smooth taper-like variation to the height of the periodic structure, very good matching is achieved in the passband while the bandwidth of the stopband is strongly increased. Moreover, by smoothly tapering the width of the structure, a band-pass frequency behavior is obtained. In order to demonstrate the capabilities of the novel quasi-periodic structure proposed, a band-pass structure with good matching, wide rejected band, and high-power handling capability has been designed, fabricated, and measured obtaining very good results., This work was supported by MINECO (Spain) under projects TEC2014-51902-C2-2-R and TEC2014- 55735-C3-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Wideband channel modeling for mm-wave inside trains for 5G-related applications

  • Moreno García-Loygorri, Juan
  • Briso Rodríguez, César
  • Arnedo Gil, Israel
  • Calvo, César
  • Gómez Laso, Miguel Ángel
  • He, Danping
  • Jiménez, Florentino
  • González Posadas, Vicente
Passenger trains and especially metro trains have been identified as one of the key scenarios for 5G deployments. The wireless channel inside a train car is reported in the frequency range between 26.5GHz and 40GHz. These bands have received a lot of interest for high-density scenarios with a high-traffic demand, two of the most relevant aspects of a 5G network. In this paper we provide a full description of the wideband channel estimating Power-Delay Profiles (PDP), Saleh-Valenzuela model parameters, time-of-arrival (TOA) ranging, and path-loss results.Moreover, the performance of an automatic clustering algorithm is evaluated. The results show a remarkable degree of coherence and general conclusions are obtained., Enabling 5G TEC2014-55735-C3-2-R is funded by the Spanish Ministry of Economy and Competitiveness and also is funded by the Chinese Strategic International Cooperative Project of National key R&D Plan, 2016YFE0200200.