Pasar al contenido principal

TECNICAS DE ACCESO RADIO PARA REDES INALAMBRICAS HETEROGENEAS

TEC2013-47141-C4-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDADE DA CORUÑA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Interference Alignment Testbeds

  • Yetis, Cenk M.
  • Fanjul, Jacobo
  • García-Naya, José A.
  • Moghadam, Nima N.
  • Farhadi, Hamed
This version of the article has been accepted for publication, after peer review. The Version of Record is available online at: https://doi.org/10.1109/MCOM.2017.1600471., [Abstract]: Interference alignment has triggered high impact research in wireless communications since it was proposed nearly 10 years ago. However, the vast majority of research is centered on the theory of interference alignment and is hardly feasible in view of the existing state-of-the-art wireless technologies. Although several research groups have assessed the feasibility of interference alignment via testbed measurements in realistic environments, the experimental evaluation of interference alignment is still in its infancy since most of the experiments were limited to simpler scenarios and configurations. This article summarizes the practical limitations of experimentally evaluating interference alignment, provides an overview of the available interference alignment testbed implementations, including the costs, and highlights the imperatives for succeeding interference alignment testbed implementations. Finally, the article explores future research directions on the applications of interference alignment in the next generation wireless systems., Jacobo Fanjul’s research has been supported by the Ministerio de Economía y Competitividad (MINECO) of Spain, under grants TEC2013-47141-C4-R (RACHEL project) and FPI grant BES-2014- 069786. José A. García-Naya’s research has been funded by the Xunta de Galicia (ED431C 2016-045, ED341D R2016/012, ED431G/01), the Agencia Estatal de Investigación of Spain (TEC2013-47141-C4-1-R, TEC2015-69648-REDC, TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE). Hamed Farhadi’s research has been funded by the Swedish Research Council (VR), under grant 2015-00500., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01, Suecia. Vetenskapsrådet; 2015-00500
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

A framework to learn graph theory using simple wireless network models

  • Dapena, Adriana
  • Vázquez Araújo, Francisco Javier
  • Castro-Castro, Paula-María
  • Souto Salorio, María José
This is the peer reviewed version of the article, which has been published in final form at https://doi.org/10.1002/cae.21753. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. This article may not be enhanced, enriched or otherwise transformed into a derivative work, without express permission from Wiley or by statutory rights under applicable legislation. Copyright notices must not be removed, obscured or modified. The article must be linked to Wiley’s version of record on Wiley Online Library and any embedding, framing or otherwise making available the article or pages thereof by third parties from platforms, services and websites other than Wiley Online Library must be prohibited., [Abstract]: In order to improve the student learning process, we present a framework to define attractivecomputer laboratory lessons in Engineering Degrees. Theoretical concepts are illustrated from a practical point ofview using a graphical user interface designed to establish the relationship between wireless network models andgraph theory concepts. In this paper, we will explain some simple routing protocols to illustrate both Dijkstra’salgorithm and the graph dominant set., The authors wish to thank Xunta de Galicia and Ministerio de Economía y Competitividad of Spain for its financial support with the grants no. R2014/037 and TEC2013-47141-C4-1-R,respectively., Xunta de Galicia; R2014/037
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Analog Transmission of Correlated Sources Over BC With Distortion Balancing

  • Suárez-Casal, Pedro
  • Fresnedo, Óscar
  • Castedo, Luis
  • Garcia-Frias, Javier
© 2017 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/TCOMM.2017.2726065., [Abstract]: Analog transmission of correlated information over Gaussian broadcast channels (BCs) using analog joint source- channel coding (JSCC) is addressed. This communication strategy has attractive advantages, such as low complexity, minimal delay, graceful degradation, and adaptation to time-varying environments. In this paper, we focus on the optimization of parametric continuous mappings that satisfy individual quality of service requirements over Gaussian BCs. This optimization is based on the balancing of the user distortions to ensure the feasibility of the resulting optimization problems. An analysis of the overall distortion corresponding to the considered mappings is carried out to design algorithms that determine the optimal values for the mappings parameters. Results show that the proposed analog JSCC scheme provides near optimal performance and an adequate balancing of the individual distortions., This work has been funded in part by NSF Award CCF- 1618653, ONRG of United States (N62909-15-1-2014), the Xunta de Galicia (ED431C 2016-045, ED431G/01), the Agencia Estatal de Investigación of Spain (TEC2013-47141-C4-1-R, TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE)., United States. National Science Foundation; CCF- 1618653, United States. Office of Naval Research; N62909-15-1-2014, Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Evaluation of Analog Joint Source-Channel Coding Systems for Multiple Access Channels

  • Fresnedo, Óscar
  • González-Coma, José P.
  • Hassanin, Mohamed
  • Castedo, Luis
  • Garcia-Frias, Javier
© 2015 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/TCOMM.2015.2427164, [Abstract]: We address the evaluation of low-complexity analog Joint Source Channel Coding (JSCC) methods for the transmission of discrete-time analog symbols over Multiple-Input Multiple-Output (MIMO) Multiple Access Channels (MAC). Analog JSCC is employed to encode the source information at each transmitter prior to be directly input to the MAC access scheme. Three channel access methods are considered to ensure the receiver is able to recover the user information: Code Division Multiple Access (CDMA), linear MMSE access codes and opportunistic access. CDMA allows the orthogonal transmission of the user data requiring only Channel State Information (CSI) at reception. On the other hand, linear MMSE access codes exploit CSI knowledge at transmission and exhibit better performance. Finally, opportunistic access also exploits CSI at transmission and allocates all MAC resources to the user with the strongest channel. This latter access scheme exhibits the best performance in terms of sum distortion although it may lead to unfair rate distributions among users., This work has been funded by Xunta de Galicia, Ministerio de Economía y Competitividad of Spain, and FEDER funds of the European Union under grants 2012/287, TEC2010-19545-C04-01, CSD2008-00010 and TEC2013-47141-C4-1-R. This work has also been supported in part by NSF Award CIF- 0915800 and by the Air Force Research Laboratory under agreement number FA9550-12-1-0086., Xunta de Galicia; CN 2012/287, United States. National Science Foundation; CIF- 0915800, United States. Air Force Research Laboratory; FA9550-12-1-0086
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Emulating extreme velocities of mobile LTE receivers in the downlink

  • Rodríguez Piñeiro, José
  • Lerch, Martin
  • García-Naya, José A.
  • Caban, Sebastian
  • Rupp, Markus
  • Castedo, Luis
[Abstract]: Long-Term Evolution (LTE) is expected to substitute the Global System for Mobile (GSM) Communications as the radio access technology for railway communications. Recently, considerable attention has been devoted to high-speed trains since this particular environment poses challenging problems in terms of performance simulation and measurement. In order to considerably decrease the cost and complexity of high-speed measurement campaigns, we have proposed a technique to induce effects caused by highly time-varying channels on Orthogonal Frequency-Division Multiplexing (OFDM) signals while conducting measurements at low speeds. In this work, we illustrate the performance of this technique by comparing the results of LTE measurements at different velocities in a controlled measurement environment. Additionally, we validate this technique by means of simulations, considering one of the scenarios defined as part of the Winner Phase II Channel Models, specifically designed for high-speed train scenarios., This work has been funded by the Christian Doppler Laboratory for Wireless Technologies for Sustainable Mobility, KATHREIN Werke KG, and A1 Telekom Austria AG. This work was supported in part by the Xunta de Galicia, MINECO of Spain, and FEDER funds of the E.U. under Grant 2012/287, Grant IPT-2011-1034-370000, Grant TEC2013-47141-C4-1-R, Grant FPU12/04139, and Grant EST13/00272. The financial support by the Austrian Federal Ministry of Economy, Family and Youth and the National Foundation for Research, Technology and Development is gratefully acknowledged., Xunta de Galicia; 2012/287
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

A Novel Criterion for Vehicle Classification using Inductive Vehicle Signatures

  • Lamas Seco, José Juan
  • Dapena, Adriana
  • Vázquez Araújo, Francisco Javier
  • Castro-Castro, Paula-María
[Abstract]: Inductive Loop Detectors (ILD) are the most commonly used sensors in traffic management systems. Using the acquired inductive signatures, most proposed systems classify the vehicles using a criterion based on the estimation of the vehicle length, which requires to have a good a-priori estimate of its speed. Contrary to such standard proposals, in this paper we present a method for vehicle classification based on the criterion of the Fourier Transform (FT), which shows several interesting properties: firstly, robustness against variations in vehicle speed or constant acceleration, and secondly, only one inductive signature is required. Our method will be evaluated using real inductive signatures captured with a hardware prototype also developed by us., The authors thank Xunta de Galicia and Ministerio de Economía y Competitividad of Spain for its financial support under grants number R2014/037 and TEC2013-47141-C4-1- R respectively. The authors also thank Dimaco S.C.G. (A Coruña) by the assignment of infrastructures needed for the experimental tests in real scenarios., Xunta de Galicia; R2014/037
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Multi-loop inductive sensor model for vehicle traffic applications

  • Lamas Seco, José Juan
  • Castro-Castro, Paula-María
  • Dapena, Adriana
  • Vázquez Araújo, Francisco Javier
©2017 Elsevier B.V. All rights reserved. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/bync-nd/4.0/. This version of the article has been accepted for publication in Sensors and Actuators A: Physical. The Version of Record is available online at https://doi.org/10.1016/j.sna.2017.06.020, [Abstract]: In this paper we develop an accurate sensor model for inductive loop detectors which are commonly used in traffic management systems. The model is based on rectangular coils and can be readily used for the analysis of vehicle inductive signatures, but it can be easily extended to other applications such as eddy-current non-destructive testing, magnetic resonance or induction heating. Our proposed model considers both flat and non-flat vehicle profiles and exhibits better performance than the standard approach under all the tested scenarios., This work has been funded by the Xunta de Galicia (ED431C 2016-045, ED341D R2016/012, ED431G/01), the Agencia Estatal de Investigación of Spain (TEC2013-47141-C4-1-R, TEC2015-69648-REDC, TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE)., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

QoS constrained power minimization in the MISO broadcast channel with imperfect CSI

  • González-Coma, José P.
  • Joham, Michael
  • Castro-Castro, Paula-María
  • Castedo, Luis
This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/. This version of the article: González-Coma, J. P., Joham, M., Castro, P. M., & Castedo, L. (2017). 'QoS constrained power minimization in the MISO broadcast channel with imperfect CSI', has been accepted for publication in Signal Processing, 131, 447–455. The Version of Record is available online at: https://doi.org/10.1016/j.sigpro.2016.09.007., [Abstract]: In this paper we consider the design of linear precoders and receivers in a Multiple-Input Single-Output (MISO) Broadcast Channel (BC). We aim to minimize the transmit power while meeting a set of per-user Quality-of-Service (QoS) constraints expressed in terms of per-user average rate requirements. The Channel State Information (CSI) is assumed to be known perfectly at the receivers but only partially at the transmitter. To solve this problem we convert the QoS constraints into Minimum Mean Square Error (MMSE) constraints. We then leverage MSE duality between the BC and the Multiple Access Channel (MAC), as well as standard interference functions in the dual MAC, to perform power minimization by means of an Alternating Optimization (AO) algorithm. Problem feasibility is also studied to determine whether the QoS constraints can be met or not. Finally, we present an algorithm to balance the average rates and manage situations that may be unfeasible, or lead to an unacceptably high transmit power., This work was supported by Xunta de Galicia, MINECO of Spain, and FEDER funds of EU, under grants 2012/287 and TEC2013-47141-C4-1-R., Xunta de Galicia; 2012/287
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Evolving military broadband wireless communication systems: WiMAX, LTE and WLAN

  • Fraga-Lamas, Paula
  • Castedo, Luis
  • Morales-Méndez, Antonio
  • Camas-Albar, J. M.
© 2016 IEEE. This version of the paper has been accepted for publication. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The final published paper is available online at: https://doi.org/10.1109/ICMCIS.2016.7496570., [Abstract]: Emerging technologies for mobile broadband wireless are being considered as a Commercial Off-The-Shelf solution to cover the operational requirements of the future warfare. The capabilities of these technologies are being enhanced to meet the growing market demands on performance. In this context, several standards such as WiMAX, LTE or WLAN are introducing themselves as strong candidates to fulfill these requirements. This paper presents an innovative scenario-based approach to develop a Military Broadband Wireless Communication System (MBWCS). Its main objective is to analyze how similar a military MBWCS can be to the identified civil standards, taking operational and high level technical requirements into account. This specification will be used for analyzing the applicability and the modifications of each of the standards layers individually. Proving the feasibility and aptitude of each standard provides strong foundations to address a MBWCS in the most efficient way., This work has been funded by MINECO of Spain under grant TEC2013-47141-C4-1-R and Indra Sistemas S.A. The authors acknowledge to Colin Brown, Mehmet Hayri K üçüktabak and Matthias Tschauner their collaboration in the NATO IST-ET-068.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Experimental evaluation of interference alignment for broadband WLAN systems

  • Lameiro, Christian
  • González Fernández, Óscar
  • García-Naya, José A.
  • Santamaría, Ignacio
  • Castedo, Luis
[Abstract]: In this paper, we present an experimental study on the performance of spatial interference alignment (IA) in indoor wireless local area network scenarios that use orthogonal frequency division multiplexing (OFDM) according to the physical-layer specifications of the IEEE 802.11a standard. Experiments have been carried out using a wireless network testbed capable of implementing a 3-user MIMO interference channel. We have implemented IA decoding schemes that can be designed according to distinct criteria (e.g., zero-forcing or MaxSINR). The measurement methodology has been validated considering practical issues like the number of OFDM training symbols used for channel estimation or feedback time. In case of asynchronous users, a time-domain IA decoding filter is also compared to its frequency-domain counterpart. We also evaluated the performance of IA from bit error ratio measurement-based results in comparison to different time-division multiple access transmission schemes. The comparison includes single- and multiple-antenna systems transmitting over the dominant mode of the MIMO channel. Our results indicate that spatial IA is suitable for practical indoor scenarios in which wireless channels often exhibit relatively large coherence times., This work has been supported by Xunta de Galicia, MINECO of Spain, and by FEDER funds of the E.U. under Grant 2012/287, Grant TEC2013-47141-C4-R (RACHEL project), Grant CSD2008-00010 (COMONSENS project), and FPU Grants AP2010-2189 and AP2009-1105., Xunta de Galicia; 2012/287
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Adapting Side Information to Transmission Conditions in Precoding Systems

  • Labrador, Josmary
  • Castro-Castro, Paula-María
  • Dapena, Adriana
  • Vázquez Araújo, Francisco Javier
The conference was hold in A Coruña, Spain, June 19-23, 2017, [Abstract]: This work proposes an hybrid precoding method in a Multiple-Input/Multiple-Output Frequency Division Duplex (MIMO FDD) system with the objective of reducing the load associated to transmit side information needed to adapt precoding matrices in both the transmitter and the receiver. The type of precoding is determined at the transmitter by using a simple rule that takes into account a receive Signal–to–Noise Ratio (SNR) estimate. The receiver computes the magnitude of the channel level fluctuations and determines the time instants when long pilot sequences are needed to estimate the precoding matrices. Using a low cost feedback channel, the receiver indicates to the transmitter both the type of precoder and transmit frames to be used., This work has been funded by the Galician Government under grants ED431C 2016-045 and ED341D R2016/012 as well as by the Spanish Government under grants TEC2013-47141-C4-1-R (RACHEL project) and TEC2016-75067-C4-1-R (CARMEN project)., Xunta de Galicia: ED431C 2016-045, Xunta de Galicia: ED341D R2016/012
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Analog Beamforming Using Time-Modulated Arrays With Digitally Preprocessed Rectangular Sequences

  • Maneiro-Catoira, Roberto
  • Brégains, Julio
  • García-Naya, José A.
  • Castedo, Luis
© 2018 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/LAWP.2018.2797971., [Abstract]: Conventional time-modulated arrays are based on the application of variable-width periodical rectangular pulses (easily implemented with radio frequency switches) to the individual antenna excitations. However, a serious bottleneck arises when the number of exploited harmonic beams increases. In this context, the modest windowing features of the rectangular pulses produce an inflexible and ineffective harmonic beamforming. The use of other pulses, such as sum of weighted cosines, partially solves these issues at the expense of introducing additional non-timing variables. We propose the discrete-time preprocessing of rectangular pulses before being applied to the antenna to accomplish an agile, efficient, and accurate harmonic beamforming, while keeping the simplicity of the hardware structure., This work has been funded by the Xunta de Galicia (ED431C 2016-045, ED341D R2016/012, ED431G/01), the Agencia Estatal de Investigación of Spain (TEC2013-47141-C4-1-R, TEC2015-69648-REDC, TEC2016-75067- C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE)., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Experimental Characterization of LTE Wireless Links in High-Speed Trains

  • Domínguez-Bolaño, Tomás
  • Rodríguez Piñeiro, José
  • García-Naya, José A.
  • Castedo, Luis
[Abstract]: Multimedia and data-based services experienced a nonstopping growth over the last few years. People are continuously on the move using devices to access multimedia contents or other data-based services. Due to this, railway companies are showing a great interest in deploying broadband mobile wireless networks in high-speed-trains with the aim of supporting both passenger services provisioning as well as automatic train control and signaling. Nowadays, the most widely used technology for communications between trains and the railway infrastructure is GSM for Railways (GSM-R); however, it has limited capabilities to support such advanced services. Due to its success in the mass market, Long Term Evolution (LTE) seems to be the best candidate to substitute GSM-R. In this paper, we experimentally characterize the downlink between an LTE Evolved NodeB (eNodeB) and a high-speed train in a commercial high-speed line. We consider two links: the one between the eNodeB and the antennas placed outdoors on the train roof, and the direct link between the eNodeB and a receiver inside the train. Such a characterization consists in assessing the path loss, the Signal to Noise Ratio, the -Factor, the Power Delay Profile, the delay spread, and the Doppler Power Spectral Density., This work has been funded by the Xunta de Galicia (ED431C 2016-045, ED341D R2016/012, and ED431G/01), the Agencia Estatal de Investigación of Spain (TEC2013-47141-C4-1-R, TEC2015-69648-REDC, and TEC2016-75067-C4-1-R), ERDF funds of the EU (AEI/FEDER, UE), and the predoctoral Grant BES-2014-069772. The authors would like to express their gratitude to the personnel from the TECRAIL consortium involved in the measurement campaign., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Experimental evaluation of the WiMAX downlink physical layer in high-mobility scenarios

  • Suárez-Casal, Pedro
  • Rodríguez Piñeiro, José
  • García-Naya, José A.
  • Castedo, Luis
[Abstract]: The experimental evaluation of the WiMAX downlink physical layer in high-mobility scenarios is extremely difficult to carry out because it requires the realization of measurement campaigns with expensive fast-moving vehicles. In this work, however, we succeeded in doing such an experimental evaluation with a low-mobility vehicle. The key idea is the enlargement of the symbol period prior to its transmission over the air. Such enlargement reduces the frequency spacing between the orthogonal frequency division multiplexing (OFDM) subcarriers in WiMAX transmissions and hence induces significant inter-carrier interference (ICI) on the received signals. The performance impact of such ICI in terms of error vector magnitude (EVM) and throughput is analyzed under different conditions like the use of multiple antennas, the placement of the receive antennas, or the accuracy of the channel information to adapt the transmission rate., The authors thank Ismael Rozas Ramallal for his support in developing and testing the testbed and conducting the measurement campaigns. This work was supported in part by Xunta de Galicia, MINECO of Spain, and by FEDER funds of the E.U. under Grant 2012/287, Grant IPT-2011-1034-370000, and Grant TEC2013-47141-C4-1-R., Xunta de Galicia; 2012/287
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Enhanced Time-Modulated Arrays for Harmonic Beamforming

  • Maneiro-Catoira, Roberto
  • Brégains, Julio
  • García-Naya, José A.
  • Castedo, Luis
This version of the article has been accepted for publication, after peer review. The Version of Record is available online at: https://doi.org/10.1109/JSTSP.2016.2627178., [Abstract]: One of the primary features of time-modulated arrays (TMAs) is their ability to adapt their harmonic patterns to exploit the angular diversity of multipath wireless channels. In such a case, the TMA excitations must provide an adequate level of harmonic windowing in order to safeguard both the antenna efficiency and the signal-to-noise ratio at reception. In this work, we propose to time-modulate the array excitations with periodic sum-of-weighted-cosine (SWC) pulses rather than with the periodic rectangular pulses corresponding to the on-off switches of conventional TMAs. We show that how the larger flexibility of the SWC pulses allows for a more versatile design of the TMA harmonic radiation patterns without penalizing the array gain for each exploited harmonic., This work has been funded by Xunta de Galicia, MINECO of Spain, and FEDER funds of the EU under grants 2012/287 and TEC2013-47141-C4-1-R. The authors would like to express their gratitude to Dr. Lorenzo Poli and to Dr. Paolo Rocca (ELEDIA Research Center, University of Trento, Italy) for their support with the adaptive nulling algorithms., Xunta de Galicia; 2012/287
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Estimation of Laplacian Symbols for Analog Transmission Over MIMO Channels

  • Suárez-Casal, Pedro
  • Fresnedo, Óscar
  • Castedo, Luis
© 2015 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/LCOMM.2015.2485216., [Abstract]: The MAP and MMSE estimation of Laplace-distributed symbols transmitted over multiple-input multiple-output channels is studied. This is an important problem in analog joint source channel coding with spiral mappings, where the probability density function of the transmitted symbols approximates a Laplace distribution in the low SNR regime. Simulation results are presented to illustrate the suitability of these estimators in uncoded and coded analog communications., This work was supported by Xunta de Galicia and MINECO of Spain under grants 2012/287 and TEC2013-47141-C4-1-R., Xunta de Galicia; CN 2012/287
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

QoS constrained power minimization in the multiple stream MIMO broadcast channel

  • González-Coma, José P.
  • Joham, Michael
  • Castro-Castro, Paula-María
  • Castedo, Luis
This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/ licenses/by-nc-nd/4.0/. This version of the article: González-Coma, J. P., Joham, M., Castro, P. M., & Castedo, L. (2018). 'QoS constrained power minimization in the multiple stream MIMO broadcast channel', has been accepted for publication in Signal Processing, 143, 48–55. The Version of Record is available online at: https://doi.org/10.1016/ j.sigpro.2017.08.015., [Abstract]: This work addresses the design of optimal linear transmit filters for the Multiple Input-Multiple Output (MIMO) Broadcast Channel (BC) when several spatial streams are allocated to each user. We further consider that the Channel State Information (CSI) is perfect at the receivers but is only partial at the transmitter. A statistical model for the partial CSI is assumed and exploited for the filter design. The relationship between average rate and average Mean Square Error (MSE) is studied to determine the optimal way to distribute the per-user rates among the streams. Finally, the feasible average sum-MSE (sMSE) region is studied and the impact of the CSI uncertainty over the overall system performance is evaluated., This work was funded by Xunta de Galicia (ED431C 2016-045, ED341D R2016/012, ED431G/01), AEI of Spain (TEC2013-47141-C4-1-R, TEC2015-69648-REDC, TEC2016-75067-C4-1-R), and ERDF funds (AEI/FEDER, EU)., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Propagation modeling for outdoor-to-indoor and indoor-to-indoor wireless links in high-speed train

  • Zhang, Lei
  • Rodríguez Piñeiro, José
  • Fernández, Jean Raphaël Olivier
  • García-Naya, José A.
  • Matolak, David W.
  • Briso-Rodríguez, Cesar
  • Castedo, Luis
This version of the article: Zhang, L., Rodríguez-Piñeiro, J., Fernández, J. R. O., García-Naya, J. A., Matolak, D. W., Briso, C., & Castedo, L. (2017). ‘Propagation modeling for outdoor-to-indoor and indoor-to-indoor wireless links in high-speed train’ has been accepted for publication in: Measurement, 110, 43–52. The Version of Record is available online at https://doi.org/10.1016/j.measurement.2017.06.014., [Abstract]: Nowadays telecommunication companies have shown a great interest in deploying broadband mobile wireless networks in high-speed trains (HSTs) with the aim of supporting both passenger services provisioning as well as automatic train control and signaling. The train carriage, as a confined steel structure, has specific propagation characteristics, which motivates the study of the indoor-to-indoor and outdoor-to-indoor radio propagation characteristics for broadband wireless communication systems in high-speed railways, constituting the main contribution of this work. This study has been performed by means of measurements considering an actual Long Term Evolution (LTE) network deployment, as well as a portable test transmitter and different configurations of antennas and receivers at 2.4, 2.6 and 5.7 GHz in a commercial high-speed rail line in Spain. The results show that radio waves incur obvious waveguiding effects inside the HST car. Moreover, for the propagation from the railway station to a mobile receiver inside the HST car, waves at higher frequencies experience less attenuation through the train carriage, by better propagating through windows. Although the railway station and train interior contain objects that induce a rich set of multipath components, the analysis of small-scale fading statistics shows that the channel still has a dominant path. Also, the LTE coverage tests for Base Transceiver Station (BTS)-Train and BTS-Mobile links were conducted and with internal and external antennas on board the train. We found that there was a strong signal penetration loss of approximately 26 dB caused by the train carriage structure. The final results constitute an initial model for the propagation incurred by a relay-based communications system for fourth generation (4G) network in railways., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01, This work has been developed under the framework of ENABLING 5G TEC2014-55735-C3-2-R funded by the Spanish Ministry of Economy and Competitiveness. This work has been also funded by the Xunta de Galicia (ED431C 2016-045, ED341D R2016/012 and ED431G/01), the Agencia Estatal de Investigación of Spain (TEC2013-47141-C4-1-R, TEC2015-69648-REDC and TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE). Financial support of the China Scholarship Council (CSC) research fellowship given to Lei Zhang is also acknowledged.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Algorithms for determining relative position between spheroids and hyperboloids with one sheet

  • Castro-Castro, Paula-María
  • Dapena, Adriana
  • Souto Salorio, María José
  • Tarrío-Tobar, Ana D.
©2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https:// creativecommons.org/licenses/by-nc-nd/4.0/. This version of the article: Castro, P. M., Dapena, A., Souto- Salorio, M. J., & Tarrío-Tobar, A. D. (2019). 'Algorithms for determining relative position between spheroids and hyperboloids with one sheet', has been accepted for publication in Mathematics and Computers in Simulation, 160, 168–179.The Version of Record is available online at https://doi.org/10.1016/j.matcom.2018.12.006., [Abstract]: In this work we present a new method for determining relative positions between one moving object, modelled by a bounding spheroid, and surrounding static objects, modelled by circular hyperboloids of one sheet. The proposed strategy is based on the real-time calculation of the coefficients of degree three polynomial. We propose several algorithms for two real applications of this geometric problem: the first one, oriented to the design of video games, and the second one, devoted to surveillance tasks of a quadcopter in industrial or commercial environments., This work has been funded by the Xunta de Galicia, Spain (ED431C 2016-045, ED341D R2016/012, ED431G/01), the Agencia Estatal de Investigación of Spain (TEC2013-47141-C4-1-R, TEC2015-69648-REDC, TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE). The authors wish to thank José Sanmartín for his helpful work in the graphic design of the pictures included in this paper., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Performance Analysis of Time-Modulated Arrays for the Angle Diversity Reception of Digital Linear Modulated Signals

  • Maneiro-Catoira, Roberto
  • Brégains, Julio
  • García-Naya, José A.
  • Castedo, Luis
  • Rocca, Paolo
  • Poli, Lorenzo
This version of the article has been accepted for publication, after peer review. The Version of Record is available online at: https://doi.org/10.1109/JSTSP.2016.2609852., [Abstract]: Diversity occurs whenever several copies of the same transmitted signal arrive at a receiver. Such a situation allows for improving the performance of a wireless communication system transmitting over a radio channel without increasing the transmit power. Previous works have shown that time-modulated arrays are capable of faithfully acquiring digital signals while exploiting angular diversity through the adaptive beamforming of their harmonic patterns. In this work, we take a step further and consider a wireless communication system employing digital linear modulated signals and an innovative receiver that includes a time-modulated array and a maximum ratio combining subsystem. The maximum ratio combiner is adapted to optimally exploit the multipath channel angular diversity. The performance of the system is analyzed in terms of two metrics: the signal-to-noise ratio and the symbol error rate. The results are compared to those achieved with other receivers that include conventional antenna arrays, exhibiting the time-modulated array solution a good tradeoff between performance and hardware complexity., This work has been funded by Xunta de Galicia, MINECO of Spain, and FEDER funds of the EU under grants 2012/287 and TEC2013-47141-C4-1-R., Xunta de Galicia; 2012/287
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Analog Transmission of Correlated Sources Over Fading SIMO Multiple Access Channels

  • Suárez-Casal, Pedro
  • Fresnedo, Óscar
  • Castedo, Luis
  • Garcia-Frias, Javier
© 2017 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/TCOMM.2017.2695197., [Abstract]: Joint source-channel coding for discrete-time analog sources is an appealing transmission approach because of its extremely low delay and complexity. When the users access the channel orthogonally, analog transmission of correlated information over fading multiple access channels (MACs) using modulo-like mappings provides better performance than uncoded transmission. In this paper, we propose a simplified decoder for modulo mappings in possibly non-orthogonal MAC scenarios with a single-antenna users and a multiple-antenna receiver. Sphere decoding is investigated to reduce the computational complexity when the number of users is large. In addition, affordable strategies are proposed to optimize the mapping parameters according to the channel conditions and the source correlation. The obtained results show that the use of modulo mappings is suitable when the number of antennas at the receiver is larger than the number of users and for high correlation between user data., This work has been funded by the ONRG of United States (N62909-15-1-2014), the NSF (award CCF-1618653), Xunta de Galicia (ED431C 2016-045), the Agencia Estatal de Investigación of Spain (TEC2013-47141-C4-1-R, TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE)., United States. Office of Naval Research; N62909-15-1-2014, United States. National Science Foundation; CCF-1618653, Xunta de Galicia; ED431C 2016-045