Pasar al contenido principal

CODIFICACION Y PROCESADO DE SEÑALES PARA REDES EMERGENTES DE COMUNICACION Y DE SENSORES INALAMBRICAS

TEC2016-75067-C4-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDADE DA CORUÑA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 54
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Acquisition of general competences using project-based learning

  • Laport, Francisco
  • Dapena, Adriana
  • Castro, Paula
  • Vazquez-Araujo, Francisco
[EN] During years, professors of higher education focused on the outcome of the assimilation of information through learning (i.e., in the acquisition of knowledge).  In a European context, the Bologna Process has accelerated and spread the process of defining explicit learning outcomes for higher education programs, including those in terms of general competences and transferable skills. Our teaching experience in engineering degrees have shown that these students have difficulties for understanding the math basics of some disciplines. For greater effectiveness in knowledge acquisition, we consider as an essential issue the inclusion of laboratory activities based on computer simulations performed using software. For acquiring those general competences and transferable skills, our proposal also includes several projects in which our students must develop skills such as communication, teamwork or problem solving. We have observed that such projects allow students the development of their creativity, an improvement in oral and written communication, and also an optimal training for the B.S. degree project work and even for their future professional life., This work has been funded by the Xunta de Galicia (ED431C 2016-045, ED341D R2016/012, ED431G/01), the Agencia Estatal de Investigación of Spain (TEC2015-69648-REDC, TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Building decentralized fog computing-based smart parking systems: from deterministic propagation modeling to practical deployment

  • Celaya Echarri, Mikel
  • Froiz Míguez, Iván
  • Azpilicueta Fernández de las Heras, Leyre
  • Iturri López, Peio
  • Falcone Lanas, Francisco
The traditional process of finding a vacant parking slot is often inefficient: it increases driving time, traffic congestion, fuel consumption and exhaust emissions. To address such problems, smart parking systems have been proposed to help drivers to find available parking slots faster using latest sensing and communications technologies. However, the deployment of the communications infrastructure of a smart parking is not straightforward due to multiple factors that may affect wireless propagation. Moreover, a smart parking system needs to provide not only accurate information on available spots, but also fast responses while guaranteeing the system availability even in the case of lacking connectivity. This article describes the development of a decentralized low-latency smart parking system: from its conception, design and theoretical simulation, to its empirical validation. Thus, this work first characterizes a real-world scenario and proposes a fog computing and Internet of Things (IoT) based communications architecture to provide smart parking services. Next, a thorough analysis on the wireless channel properties is carried out by means of an in-house developed deterministic 3D-Ray Launching (3D-RL) tool. The obtained results are validated through a real-world measurement campaign and then the communications architecture is implemented by using ZigBee sensor nodes. The implemented architecture also makes use of Bluetooth Low Energy beacons, an Android app, a decentralized database and fog computing gateways, whose performance is evaluated in terms of response latency and processing rate. Results show that the proposed system is able to deliver information to the drivers fast, with no need for relying on remote servers. As a consequence, the presented development methodology and communications evaluation tool can be useful for future smart parking developers, which can determine the optimal locations of the wireless transceivers during the simulation stage and then deploy a system that can provide fast responses and decentralized services., This work was supported in part by the School of Engineering and Sciences, Tecnológico de Monterrey, in part by the Xunta de Galicia under Grant ED431G2019/01, in part by the Agencia Estatal de Investigación of Spain under Grant TEC2016-75067-C4-1-R, Grant RED2018-102668-T, and Grant PID2019-104958RB-C42, in part by the European Regional Development Fund (ERDF) funds of the European Union (EU) (AEI/FEDER, UE), and in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCI-U/AEI/FEDER,UE) under Grant RTI2018-095499-B-C31.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Design and experimental validation of an augmented reality system with wireless integration for context aware enhanced show experience in auditoriums

  • Picallo Guembe, Imanol
  • Vidal Balea, A.
  • Blanco Novoa, Óscar
  • Iturri López, Peio
  • Fraga Lamas, Paula
  • Azpilicueta Fernández de las Heras, Leyre
  • Falcone Lanas, Francisco
  • Fernández Caramés, Tiago M.
  • Klaina, Hicham
The development of multiple cultural and social related activities, such as shows related with the performing arts, conferences or presentations rely on facilities such as auditoriums, theatres and conference sites, which are progressively including multiple technological features in order to enhance user experience. There are still however situations in which user experience is limited owing to lack of environment adaption, such as people with disabilities. In this sense, the adoption of Context Aware paradigms within auditoriums can provide adequate functionalities in order to comply with specific needs. This work is aimed at demonstrating the feasibility in enhancing user experience (e.g., improving the autonomy of disabled people) within auditorium and theatre environments, by means of an Augmented Reality (AR) device (HoloLens smart glasses) with wireless system integration. To carry out the demonstration, different elements to build AR applications are described and tested. First, an intensive measurement campaign was performed in a real auditorium in the city of Pamplona (Baluarte Congress Center) in order to evaluate the feasibility of using Wi-Fi enabled AR devices in a complex wireless propagation scenario. The results show that these environments exhibit high levels of interference, owing to the co-existence and non-coordinated operation of multiple wireless communication systems, such as on site and temporary Wi-Fi access points, wireless microphones or communications systems used by performers, staff and users. Deterministic wireless channel estimation based in volumetric 3D Ray Launching have been obtained for the complete scenario volume, in order to assess quality of service metrics. For illustration purposes, a user-friendly application to help hearing impaired people was developed and its main features were tested in the auditorium. Such an application provides users with a 3D virtual space to visualize useful multimedia content like subtitles or additional information about the show, as well as an integrated call button. © 2013 IEEE., This work was supported in part by the Article Processing Charges (APC) from the Xunta de Galicia under Grant ED431G 2019/01; in part by the Agencia Estatal de Investigación of Spain under Grant TEC2016-75067-C4-1-R, Grant RED2018-102668-T, and Grant PID2019-104958RB-C42; in part by the European Regional Development Fund (ERDF) of the European Union (EU) [Agencia Estatal de Investigación (AEI)/Fondo Europeo de Desarrollo Regional (FEDER), UE]; and in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE) under Project RTI2018-095499-B-C31.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Design, implementation, and empirical validation of an IoT smart irrigation system for fog computing applications based on Lora and Lorawan sensor nodes

  • Froiz Míguez, Iván
  • Iturri López, Peio
  • Fraga Lamas, Paula
  • Celaya Echarri, Mikel
  • Blanco Novoa, Óscar
  • Azpilicueta Fernández de las Heras, Leyre
  • Falcone Lanas, Francisco
  • Fernández Caramés, Tiago M.
Climate change is driving new solutions to manage water more efficiently. Such solutions involve the development of smart irrigation systems where Internet of Things (IoT) nodes are deployed throughout large areas. In addition, in the mentioned areas, wireless communications can be difficult due to the presence of obstacles and metallic objects that block electromagnetic wave propagation totally or partially. This article details the development of a smart irrigation system able to cover large urban areas thanks to the use of Low-Power Wide-Area Network (LPWAN) sensor nodes based on LoRa and LoRaWAN. IoT nodes collect soil temperature/moisture and air temperature data, and control water supply autonomously, either by making use of fog computing gateways or by relying on remote commands sent from a cloud. Since the selection of IoT node and gateway locations is essential to have good connectivity and to reduce energy consumption, this article uses an in-house 3D-ray launching radio-planning tool to determine the best locations in real scenarios. Specifically, this paper provides details on the modeling of a university campus, which includes elements like buildings, roads, green areas, or vehicles. In such a scenario, simulations and empirical measurements were performed for two different testbeds: a LoRaWAN testbed that operates at 868 MHz and a testbed based on LoRa with 433 MHz transceivers. All the measurements agree with the simulation results, showing the impact of shadowing effects and material features (e.g., permittivity, conductivity) in the electromagnetic propagation of near-ground and underground LoRaWAN communications. Higher RF power levels are observed for 433 MHz due to the higher transmitted power level and the lower radio propagation losses, and even in the worst gateway location, the received power level is higher than the sensitivity threshold (–148 dBm). Regarding water consumption, the provided estimations indicate that the proposed smart irrigation system is able to reduce roughly 23% of the amount of used water just by considering weather forecasts. The obtained results provide useful guidelines for future smart irrigation developers and show the radio planning tool accuracy, which allows for optimizing the sensor network topology and the overall performance of the network in terms of coverage, cost, and energy consumption., This work has been funded by the Xunta de Galicia (by Grant No. ED431C 2020/15, and Grant No. ED431G 2019/01 to support the Centro de Investigación de Galicia 'CITIC'), the Agencia Estatal de Investigación of Spain (by grants RTI2018-095499-B-C31, TEC2016-75067-C4-1-R, RED2018-102668-T, and PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia 2014-2020 and AEI/FEDER Programs, UE).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Implementación de una suite gráfica para reforzar el aprendizaje en representación de contenido multimedia

  • Fresnedo, Óscar
  • Laport, Francisco
  • Castro, Paula M.
  • Dapena, Adriana
  • Vázquez-Araújo, Francisco J.
Las prácticas de las asignaturas en los grados de Ingeniería Informática se diseñan habitualmente para que los estudiantes formulen y construyan la solución a un determinado problema usando algún lenguaje de programación. Este tipo de prácticas son adecuadas cuando el objetivo es el aprendizaje o refinamiento de sus habilidades en ese lenguaje. Sin embargo, si el objetivo es que profundicen sobre las ideas desarrolladas en las clases de teoría, una aproximación más eficiente es proporcionar a los estudiantes una herramienta software que les permita trabajar y analizar conceptos teóricos de forma sencilla y práctica. En el contexto de la información multimedia, la mayoría de las aplicaciones comerciales están orientadas al desarrollo profesional y resultan poco adecuadas desde un punto de vista didáctico. Por esa razón, los autores de este artículo hemos decidido desarrollar una suite gráfica que permita a los estudiantes comprobar de forma visual los conceptos teóricos de la asignatura y analizar el impacto de múltiples factores relacionados con la representación y procesado de imágenes. Con esta herramienta, se evita que los estudiantes tengan que programar directamente las funcionalidades en un lenguaje que no dominan, de forma que pueden invertir su tiempo en trabajar con dicha herramienta y lograr un aprendizaje más profundo.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

User Grouping for the Uplink of Multiuser Hybrid mmWave MIMO

  • Pérez-Adán, Darian
  • Fresnedo, Óscar
  • González-Coma, José P.
  • Castedo, Luis
[Abstract] Hybrid analog/digital schemes for precoding/combining have proved to be a low-complexity and/or low-power strategy to obtain reasonable beamforming gains in multiuser millimeter-wave (mmWave) multiple-input multiple-output (MIMO) systems. Hybrid precoding/combining performs jointly baseband processing and analog processing in the radio frequency (RF) domain. In these systems, the number of RF chains limits the maximum number of streams simultaneously handled by the transceivers. In the uplink of a multiuser mmWave MIMO system, the hardware reduction based on hybrid transceivers is limited by the number of data streams that must be simultaneously served by the centralized node. Most works approach hybrid transceiver design by considering more RF chains than data streams, an unrealistic assumption when the number of nodes is large. On the other hand, statistically independent information is conventionally assumed in multiuser mmWave systems. This assumption does not hold in scenarios like wireless sensor networks (WSNs), where the sources produce correlated information. In this paper, by enabling inter-user correlation exploitation, we propose a grouping approach to handle a high number of individual sources with a limited number of RF chains through distributed quantizer linear coding (DQLC) mappings. The allocation of the users per group and the hybrid design of the combiner at the common central node to serve the grouped users is also analyzed. We also propose a hybrid minimum mean square error (MMSE) combining design in order to exploit the spatial correlation between the sources in a conventional uncoded mmWave uplink. Simulation results show the performance advantages of the proposed approaches in various hardware-constrained system settings., 10.13039/501100010801-Xunta de Galicia (Grant Number: ED431G2019/01) 10.13039/501100011033-Agencia Estatal de Investigaci??n (Grant Number: TEC2016-75067-C4-1-R, RED2018-102668-T and PID2019-104958RB-C42) BES-2017-081955, Xunta de Galicia; ED431G2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Transmission of Spatio-Temporal Correlated Sources Over Fading Multiple Access Channels With DQLC Mappings

  • Fresnedo, Óscar
  • Suárez-Casal, Pedro
  • Castedo, Luis
© 2019 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/ 10.1109/TCOMM.2019.2912571., [Abstract]: The design of zero-delay Joint Source-Channel Coding (JSCC) schemes for the transmission of correlated information over fading Multiple Access Channels (MACs) is an interesting problem for many communication scenarios like Wireless Sensor Networks (WSNs). Among the different JSCC schemes so far proposed for this scenario, Distributed Quantizer Linear Coding (DQLC) represents an appealing solution since it is able to outperform uncoded transmissions for any correlation level at high Signal-to-Noise Ratios (SNRs) with a low computational cost. In this paper, we extend the design of DQLC-based schemes for fading MACs considering sphere decoding to make the optimal Minimum Mean Squared Error (MMSE) estimation computationally affordable for an arbitrary number of transmit users. The use of sphere decoding also allows to formulate a practical algorithm for the optimization of DQLC-based systems. Finally, non-linear Kalman Filtering for the DQLC is considered to jointly exploit the temporal and spatial correlation of the source symbols. The results of computer experiments show that the proposed DQLC scheme with the Kalman Filter decoding approach clearly outperforms uncoded transmissions for medium and high SNRs., This work has been funded by Office of Naval Research Global of United States (N62909-15-1-2014), the Xunta de Galicia (ED431C 2016-045, ED341D R2016/012, ED431G/01), the Agencia Estatal de Investigación of Spain (TEC2015-69648-REDC, TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE)., United States. Office of Naval Research Global of United States; N62909-15-1-2014, Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Interference Alignment Testbeds

  • Yetis, Cenk M.
  • Fanjul, Jacobo
  • García-Naya, José A.
  • Moghadam, Nima N.
  • Farhadi, Hamed
This version of the article has been accepted for publication, after peer review. The Version of Record is available online at: https://doi.org/10.1109/MCOM.2017.1600471., [Abstract]: Interference alignment has triggered high impact research in wireless communications since it was proposed nearly 10 years ago. However, the vast majority of research is centered on the theory of interference alignment and is hardly feasible in view of the existing state-of-the-art wireless technologies. Although several research groups have assessed the feasibility of interference alignment via testbed measurements in realistic environments, the experimental evaluation of interference alignment is still in its infancy since most of the experiments were limited to simpler scenarios and configurations. This article summarizes the practical limitations of experimentally evaluating interference alignment, provides an overview of the available interference alignment testbed implementations, including the costs, and highlights the imperatives for succeeding interference alignment testbed implementations. Finally, the article explores future research directions on the applications of interference alignment in the next generation wireless systems., Jacobo Fanjul’s research has been supported by the Ministerio de Economía y Competitividad (MINECO) of Spain, under grants TEC2013-47141-C4-R (RACHEL project) and FPI grant BES-2014- 069786. José A. García-Naya’s research has been funded by the Xunta de Galicia (ED431C 2016-045, ED341D R2016/012, ED431G/01), the Agencia Estatal de Investigación of Spain (TEC2013-47141-C4-1-R, TEC2015-69648-REDC, TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE). Hamed Farhadi’s research has been funded by the Swedish Research Council (VR), under grant 2015-00500., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01, Suecia. Vetenskapsrådet; 2015-00500
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Fake News, Disinformation, and Deepfakes: Leveraging Distributed Ledger Technologies and Blockchain to Combat Digital Deception and Counterfeit Reality

  • Fraga-Lamas, Paula
  • Fernández-Caramés, Tiago M.
[Absctract]: The rise of ubiquitous deepfakes, misinformation, disinformation, and post-truth, often referred to as fake news, raises concerns over the role of the Internet and social media in modern democratic societies. Due to its rapid and widespread diffusion, digital deception has not only an individual or societal cost, but it can lead to significant economic losses or to risks to national security. Blockchain and other distributed ledger technologies (DLTs) guarantee the provenance and traceability of data by providing a transparent, immutable, and verifiable record of transactions while creating a peer-to-peer secure platform for storing and exchanging information. This overview aims to explore the potential of DLTs to combat digital deception, describing the most relevant applications and identifying their main open challenges. Moreover, some recommendations are enumerated to guide future researchers on issues that will have to be tackled to strengthen the resilience against cyber-threats on today's online media., This work was supported by the Xunta de Galicia (ED431G2019/01), in part by the Agencia Estatal de Investigacion of Spain (TEC2016-75067-C4-1-R, RED2018-102668-T, and in part by ERDF funds of the EU (AEI/FEDER, UE)., Xunta de Galicia; ED431G2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Design and Experimental Validation of an Augmented Reality System With Wireless Integration for Context Aware Enhanced Show Experience in Auditoriums

  • Picallo, Imanol
  • Vidal-Balea, Aida
  • Blanco, Óscar
  • López Iturri, Peio
  • Fraga-Lamas, Paula
  • Klaina, Hicham
  • Fernández-Caramés, Tiago M.
  • Azpilicueta, Leyre
  • Falcone, Francisco
[Abstract] The development of multiple cultural and social related activities, such as shows related with the performing arts, conferences or presentations rely on facilities such as auditoriums, theatres and conference sites, which are progressively including multiple technological features in order to enhance user experience. There are still however situations in which user experience is limited owing to lack of environment adaption, such as people with disabilities. In this sense, the adoption of Context Aware paradigms within auditoriums can provide adequate functionalities in order to comply with specific needs. This work is aimed at demonstrating the feasibility in enhancing user experience (e.g., improving the autonomy of disabled people) within auditorium and theatre environments, by means of an Augmented Reality (AR) device (HoloLens smart glasses) with wireless system integration. To carry out the demonstration, different elements to build AR applications are described and tested. First, an intensive measurement campaign was performed in a real auditorium in the city of Pamplona (Baluarte Congress Center) in order to evaluate the feasibility of using Wi-Fi enabled AR devices in a complex wireless propagation scenario. The results show that these environments exhibit high levels of interference, owing to the co-existence and non-coordinated operation of multiple wireless communication systems, such as on site and temporary Wi-Fi access points, wireless microphones or communications systems used by performers, staff and users. Deterministic wireless channel estimation based in volumetric 3D Ray Launching have been obtained for the complete scenario volume, in order to assess quality of service metrics. For illustration purposes, a user-friendly application to help hearing impaired people was developed and its main features were tested in the auditorium. Such an application provides users with a 3D virtual space to visualize useful multimedia content like subtitles or additional information about the show, as well as an integrated call button., 10.13039/501100010801-Article Processing Charges (APC) from the Xunta de Galicia (Grant Number: ED431G 2019/01) 10.13039/501100011033-Agencia Estatal de Investigación of Spain (Grant Number: TEC2016-75067-C4-1-R, RED2018-102668-T and PID2019-104958RB-C42) 10.13039/501100008530-European Regional Development Fund (ERDF) of the European Union (EU) [Agencia Estatal de Investigación (AEI)/Fondo Europeo de Desarrollo Regional (FEDER), UE] 10.13039/100014440-Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE) (Grant Number: RTI2018-095499-B-C31), Xunta de Galicia; ED431G 2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Analog Transmission of Correlated Sources Over BC With Distortion Balancing

  • Suárez-Casal, Pedro
  • Fresnedo, Óscar
  • Castedo, Luis
  • Garcia-Frias, Javier
© 2017 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/TCOMM.2017.2726065., [Abstract]: Analog transmission of correlated information over Gaussian broadcast channels (BCs) using analog joint source- channel coding (JSCC) is addressed. This communication strategy has attractive advantages, such as low complexity, minimal delay, graceful degradation, and adaptation to time-varying environments. In this paper, we focus on the optimization of parametric continuous mappings that satisfy individual quality of service requirements over Gaussian BCs. This optimization is based on the balancing of the user distortions to ensure the feasibility of the resulting optimization problems. An analysis of the overall distortion corresponding to the considered mappings is carried out to design algorithms that determine the optimal values for the mappings parameters. Results show that the proposed analog JSCC scheme provides near optimal performance and an adequate balancing of the individual distortions., This work has been funded in part by NSF Award CCF- 1618653, ONRG of United States (N62909-15-1-2014), the Xunta de Galicia (ED431C 2016-045, ED431G/01), the Agencia Estatal de Investigación of Spain (TEC2013-47141-C4-1-R, TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE)., United States. National Science Foundation; CCF- 1618653, United States. Office of Naval Research; N62909-15-1-2014, Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Channel Estimation and Hybrid Precoding for Frequency Selective Multiuser mmWave MIMO Systems

  • González-Coma, José P.
  • Rodríguez-Fernández, Javier
  • González-Prelcic, Nuria
  • Castedo, Luis
  • Heath, Robert W.
© 2018 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/JSTSP.2018.2819130, [Abstract]: Configuring the hybrid precoders and combiners in a millimeter wave multiuser multiple-input multiple-output system is challenging in frequency selective channels. In this paper, we develop a system that uses compressive estimation on the uplink to configure precoders and combiners for the downlink. In the first step, the base station (BS) simultaneously estimates the channels from all the mobile stations on each subcarrier. To reduce the number of measurements required, compressed sensing techniques are developed that exploit common support on the different subcarriers. In the second step, exploiting reciprocity and the channel estimates the BS designs hybrid precoders and combiners. Two algorithms are developed for this purpose, with different performance and complexity tradeoffs: First, a factorization of the purely digital solution; and second, an iterative hybrid design. Extensive numerical experiments evaluate the proposed solutions comparing to the state-of-the-art strategies, and illustrating design tradeoffs in overhead, complexity, and performance., This work was supported in part by Xunta de Galicia (ED431C 2016-045, ED341D R2016/012, ED431G/01, ED431G/04), in part by AEI of Spain (TEC2015-69648-REDC, TEC2016-75067-C4-1-R, TEC2016- 75103-C2-2-R), in part by ERDF funds (AEI/FEDER, EU), and in part by the National Science Foundation under Grant 1702800., Xunta de Galicia; ED431C 2016/045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01, Xunta de Galicia; ED431G/04
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Multi-loop inductive sensor model for vehicle traffic applications

  • Lamas Seco, José Juan
  • Castro-Castro, Paula-María
  • Dapena, Adriana
  • Vázquez Araújo, Francisco Javier
©2017 Elsevier B.V. All rights reserved. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/bync-nd/4.0/. This version of the article has been accepted for publication in Sensors and Actuators A: Physical. The Version of Record is available online at https://doi.org/10.1016/j.sna.2017.06.020, [Abstract]: In this paper we develop an accurate sensor model for inductive loop detectors which are commonly used in traffic management systems. The model is based on rectangular coils and can be readily used for the analysis of vehicle inductive signatures, but it can be easily extended to other applications such as eddy-current non-destructive testing, magnetic resonance or induction heating. Our proposed model considers both flat and non-flat vehicle profiles and exhibits better performance than the standard approach under all the tested scenarios., This work has been funded by the Xunta de Galicia (ED431C 2016-045, ED341D R2016/012, ED431G/01), the Agencia Estatal de Investigación of Spain (TEC2013-47141-C4-1-R, TEC2015-69648-REDC, TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE)., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Transmission of Analog Information Over the Multiple Access Relay Channel Using Zero-Delay Non-Linear Mappings

  • Fresnedo, Óscar
  • Suárez-Casal, Pedro
  • Castedo, Luis
[Abstract]: We consider the zero-delay encoding of discrete-time analog information over the Multiple Access Relay Channel (MARC) using non-linear mapping functions. On the one hand, zero-delay non-linear mappings are capable to deal with the multiple access interference (MAI) caused by the simultaneous transmission of the information. On the other, the relaying operation is a Decode-and-Forward (DF) strategy where the decoded messages are merged into a single message using a specific continuous mapping depending on the correlation level of the source information. At the receiver, an approximated Minimum Mean Squared Error (MMSE) decoder is developed to obtain an estimate of the transmitted source symbols which exploits the information received from the relay node in combination with the messages received from the transmitters through the direct links. The resulting system provides better performance than the other alternative encoding strategies for the MARC with similar complexity and delay and also approaches the performance of theoretical strategies which require a significantly higher delay and computational cost., This work was supported in part by the Office of the Naval Research Global of United States under Grant N62909-15-1-2014, in part by the Xunta de Galicia under Grant ED431C 2016-045, Grant ED341D R2016/012, and Grant ED431G/01, in part by the Agencia Estatal de Investigación of Spain under Grant TEC2015-69648-REDC and Grant TEC2016-75067-C4-1-R, and in part by the ERDF funds of the EU (AEI/FEDER, UE)., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Implementación de una suite gráfica para reforzar el aprendizaje en representación de contenido multimedia

  • Fresnedo, Óscar
  • Laport, Francisco
  • Castro-Castro, Paula-María
  • Dapena, Adriana
  • Vázquez Araújo, Francisco Javier
Jornadas celebradas en Murcia, el 3, 4 y 5 de julio de 2019., [Resumen]: Las prácticas de las asignaturas en los grados de Ingeniería Informática se diseñan habitualmente para que los estudiantes formulen y construyan la solución a un determinado problema usando algún lenguaje de programación. Este tipo de prácticas son adecuadas cuando el objetivo es el aprendizaje o refinamiento de sus habilidades en ese lenguaje. Sin embargo, si el objetivo es que profundicen sobre las ideas desarrolladas en las clases de teoría, una aproximación más eficiente es proporcionar a los estudiantes una herramienta software que les permita trabajar y analizar conceptos teóricos de forma sencilla y práctica. En el contexto de la información multimedia, la mayoría de las aplicaciones comerciales están orientadas al desarrollo profesional y resultan poco adecuadas desde un punto de vista didáctico. Por esa razón, los autores de este artículo hemos decidido desarrollar una suite gráfica que permita a los estudiantes comprobar de forma visual los conceptos teóricos de la asignatura y analizar el impacto de múltiples factores relacionados con la representación y procesado de imágenes. Con esta herramienta, se evita que los estudiantes tengan que programar directamente las funcionalidades en un lenguaje que no dominan, de forma que pueden invertir su tiempo en trabajar con dicha herramienta y lograr un aprendizaje más profundo. | The practical activities for Degrees in Computer Engineering are usually designed to guarantee the students state and obtain the solution for a specific problem using some programming language. This type of activities are suitable when the purpose is to improve their skills in such a language. However, when the purpose is that the students achieve a deeper knowledge about theoretical ideas, a more efficient approach is to provide them a software tool to develop and analyse the theoretical concepts in a simple and practical way. In the context of multimedia information, most commercial applications are focused on professional development and they are not suitable from an educational point of view. For that, we decided to implement a graphic suite which allows the students to visually test the theoretical concepts in the subject, and to analyse the impact of multiple factors related to the representation and processing of images. Using this tool, the students do not need to implement the programme’s features, but they can spend their time on working with the developed tool and achieving a deeper learning., [Absctract]: The practical activities for Degrees in Computer Engineering are usually designed to guarantee the students state and obtain the solution for a specific problem using some programming language. This type of activities are suitable when the purpose is to improve their skills in such a language. However, when the purpose is that the students achieve a deeper knowledge about theoretical ideas, a more efficient approach is to provide them a software tool to develop and analyse the theoretical concepts in a simple and practical way. In the context of multimedia information, most commercial applications are focused on professional development and they are not suitable from an educational point of view. For that, we decided to implement a graphic suite which allows the students to visually test the theoretical concepts in the subject, and to analyse the impact of multiple factors related to the representation and processing of images. Using this tool, the students do not need to implement the programme’s features, but they can spend their time on working with the developed tool and achieving a deeper learning., Los autores pertenecen al grupo de innovación docente MATEES de la Universidade da Coruña. Este trabajo ha sido financiado por la Xunta de Galicia (ED431C 2016-045, ED431G/01) y la Agencia Estatal de Investigación de España (TEC2016-75067-C4-1-R)., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Educational graphic tool for teaching fundamentals of digital image representation

  • Fresnedo, Óscar
  • Laport, Francisco
  • Castro-Castro, Paula-María
  • Dapena, Adriana
This is the peer reviewed version of the article. It may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. This article may not be enhanced, enriched or otherwise transformed into a derivative work, without express permission from Wiley or by statutory rights under applicable legislation. Copyright notices must not be removed, obscured or modified. The article must be linked to Wiley’s version of record on Wiley Online Library and any embedding, framing or otherwise making available the article or pages thereof by third parties from platforms, services and websites other than Wiley Online Library must be prohibited., The data that support the findings of this study are openly available in the public repository MATEES/SEFRI at https://bitbucket.org/matees/sefri_code. In this repository, the entire source code of the developed tool can be visualised or downloaded., [Abstract]: In the last few decades, different teaching methodologies have been proposed to promote more active learning of students. However, it is still essential to understand the practical implications of the theoretical concepts incorporating additional methodologies, for example, problem-based learning. This methodology could include practises focused on students' programming or on using appropriate software tools. For more meaningful learning, the use of a graphic tool instead of programming provides more insight into those concepts throughout a simple and practical resource. Taking this into account, a software tool has been developed in addition to theoretical sessions in the context of a subject of the Degree in Computer Science, where the learning objectives are related to the representation and compression of multimedia content. In addition, this tool allows to configure useful exercises for these practical sessions, such that students can experiment and analyse the results from a visual perspective. The results of the surveys show a high degree of satisfaction of students, who highlight that the tool has helped them to better understand the curriculum content. In addition, there are signs of improvement in the academic results corresponding to the evaluation of performance with such software., The authors belong to the teaching innovation group MATEES at the University of A Coruna. This study has been funded by the Xunta de Galicia (ED431G2019/01), the Agencia Estatal de Investigacion of Spain (TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE), as well as by the European Social Fund of the European Union (Francisco Laport, code ED481A-2018/156)., Xunta de Galicia; ED431G2019/01, Xunta de Galicia; ED481A-2018/156
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Adapting Side Information to Transmission Conditions in Precoding Systems

  • Labrador, Josmary
  • Castro-Castro, Paula-María
  • Dapena, Adriana
  • Vázquez Araújo, Francisco Javier
The conference was hold in A Coruña, Spain, June 19-23, 2017, [Abstract]: This work proposes an hybrid precoding method in a Multiple-Input/Multiple-Output Frequency Division Duplex (MIMO FDD) system with the objective of reducing the load associated to transmit side information needed to adapt precoding matrices in both the transmitter and the receiver. The type of precoding is determined at the transmitter by using a simple rule that takes into account a receive Signal–to–Noise Ratio (SNR) estimate. The receiver computes the magnitude of the channel level fluctuations and determines the time instants when long pilot sequences are needed to estimate the precoding matrices. Using a low cost feedback channel, the receiver indicates to the transmitter both the type of precoder and transmit frames to be used., This work has been funded by the Galician Government under grants ED431C 2016-045 and ED341D R2016/012 as well as by the Spanish Government under grants TEC2013-47141-C4-1-R (RACHEL project) and TEC2016-75067-C4-1-R (CARMEN project)., Xunta de Galicia: ED431C 2016-045, Xunta de Galicia: ED341D R2016/012
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Utilization of a Mobile Application for Motor Skill Evaluation in Children

  • Moreno-Naya, David
  • Vázquez Araújo, Francisco Javier
  • Castro-Castro, Paula-María
  • Vivas-Costa, Jamile
  • Dapena, Adriana
  • González Doniz, Luz
[Abstract] The detection of needs in educational reinforcement must be done in the early stages of childhood during primary education to improve the acquisition of motor skills. An adequate early intervention can solve some detected difficulties, thus contributing to children’s motor progress and mitigating possible deficiencies such as weak motor coordination. In this work, we present a mobile application (app) that allows physiotherapists to design activities for the evaluation of motor skills. These activities can be adapted to the child’s progress and the corresponding reinforcement needs. We tested the app with children from ages 6 to 12, corresponding to the six primary school grades. The results show that these children did not have notable motor difficulties, although children in lower primary school years showed a higher level of error in movement precision. The results allow us to establish reference values for a future comparison with collectives with motor difficulties., This work has been funded by the Xunta de Galicia (ED431G2019/01), the Agencia Estatal de Investigación of Spain (TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE), Xunta de Galicia; ED431G2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Time-Modulated Multibeam Phased Arrays With Periodic Nyquist Pulses

  • Maneiro-Catoira, Roberto
  • Brégains, Julio
  • García-Naya, José A.
  • Castedo, Luis
© 2018 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/LAWP.2018.2880087., [Abstract]: We present a single sideband time-modulated multibeam phased array governed by periodic Nyquist pulsed signals. A Nyquist pulse is a physically realizable approach to the ideal sinc function. Hence, its low-pass spectrum suits particularly well for time-modulated arrays (TMAs) to perform harmonic beam steering. Contrarily to switched TMAs and standard solutions based on variable phase shifters, the performance and complexity of the proposed time modulation scheme is rather robust when increasing the number of multibeams., This work has been funded by the Xunta de Galicia (ED431C 2016-045, ED341D R2016/012, ED431G/01), the Agencia Estatal de Investigaci´on of Spain (TEC2015-69648-REDC, TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE)., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Bit Error Probability and Capacity Bound of OFDM Systems in Deterministic Doubly-Selective Channels

  • Domínguez-Bolaño, Tomás
  • Rodríguez Piñeiro, José
  • García-Naya, José A.
  • Castedo, Luis
© 2020 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/TVT.2020.3011365, [Abstract]: Doubly-selective channels, such as those that occur when the transmitter and the receiver move relative to each other at high speeds, are a key scenario for fifth generation (5G) cellular systems, which are mostly based in the use of the orthogonal frequency-division multiplexing (OFDM) modulation. In this paper, we consider an OFDM system using quadrature amplitude modulation (QAM) symbols and we show that, when transmitting over deterministic doubly-selective channels, the inter-carrier-interference (ICI) affecting a symbol can be well approximated by a complex-valued normal distribution. Based on this, we derive a lower bound for the link capacity using the Shannon-Hartley theorem. Finally, we provide an approximation of the bit error probability (BEP) using the well-known BEP expressions for Gray-coded QAM constellations over additive white Gaussian noise (AWGN) channels, and show numerical results that confirm that the proposed BEP expression approximates accurately the bit error ratio (BER) of the OFDM system for standardized channel models. The proposed closed-form analytical expressions for the capacity and the BEP do not only allow for discarding the need of computationally-costly Monte-Carlo system simulations, but also provide a theoretical framework to optimize the system parameters directly impacting on the achievable performance., Xunta de Galicia; ED431G2019/01, This work has been funded by the Xunta de Galicia (ED431G2019/01), the Agencia Estatal de Investigación of Spain (TEC2016-75067-C4-1-R, PID2019-104958RB-C42), ERDF funds of the EU (AEI/FEDER, UE), and the National Natural Science Foundation of China (NSFC) under Grants no. 61850410529 and 61971313., China, National Natural Science Foundation of China (NSFC); 61850410529, China, National Natural Science Foundation of China (NSFC); 61971313
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Analog Beamforming Using Time-Modulated Arrays With Digitally Preprocessed Rectangular Sequences

  • Maneiro-Catoira, Roberto
  • Brégains, Julio
  • García-Naya, José A.
  • Castedo, Luis
© 2018 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/LAWP.2018.2797971., [Abstract]: Conventional time-modulated arrays are based on the application of variable-width periodical rectangular pulses (easily implemented with radio frequency switches) to the individual antenna excitations. However, a serious bottleneck arises when the number of exploited harmonic beams increases. In this context, the modest windowing features of the rectangular pulses produce an inflexible and ineffective harmonic beamforming. The use of other pulses, such as sum of weighted cosines, partially solves these issues at the expense of introducing additional non-timing variables. We propose the discrete-time preprocessing of rectangular pulses before being applied to the antenna to accomplish an agile, efficient, and accurate harmonic beamforming, while keeping the simplicity of the hardware structure., This work has been funded by the Xunta de Galicia (ED431C 2016-045, ED341D R2016/012, ED431G/01), the Agencia Estatal de Investigación of Spain (TEC2013-47141-C4-1-R, TEC2015-69648-REDC, TEC2016-75067- C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE)., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Hybrid LISA for Wideband Multiuser Millimeter-Wave Communication Systems Under Beam Squint

  • González-Coma, José P.
  • Utschick, Wolfgang
  • Castedo, Luis
© 2019 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/TWC.2018.2890667, [Abstract]: This paper jointly addresses user scheduling and precoder/combiner design in the downlink of a wideband millimeter-wave communications system. We consider the orthogonal frequency-division multiplexing modulation to overcome the channel frequency selectivity and obtain a number of equivalent narrowband channels. Hence, the main challenge is that the analog preprocessing network is frequency flat and common to all the users at the transmitter side. Moreover, the effect of the signal bandwidth over the uniform linear array steering vectors has to be taken into account to design the hybrid precoders and combiners. The proposed algorithmic solution is based on the linear successive allocation, which greedily allocates streams to different users and computes the corresponding precoders and combiners. By taking into account the rank limitations imposed by the hardware at transmission and reception, the performance loss in terms of achievable sum rate for the hybrid approach is negligible. The numerical experiments show that the proposed method exhibits excellent performance with reasonable computational complexity., This work has been funded by Xunta de Galicia (ED431C 2016- 045, ED341D R2016/012, ED431G/01), AEI of Spain (TEC2015-69648-REDC, TEC2016-75067-C4-1-R), and ERDF funds (AEI/FEDER, EU)., Xunta de Galicia; ED431C 2016/045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Analog Transmission of Spatio-Temporal Correlated Sources Over MAC With Modulo Mappings

  • Suárez-Casal, Pedro
  • Fresnedo, Óscar
  • Castedo, Luis
© 2018 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/LCOMM.2018.2807427, [Abstract]: Modulo mappings is an appealing scheme for the analog transmission of spatially correlated discrete-time analog source symbols over multiple access channels. In this letter, we show that the modulo mappings are also useful to exploit temporal correlation with zero-delay and without impairing encoding/decoding computational complexity. Spatio-temporal source correlation is exploited with a Kalman filter-based receiver, coupled with a sphere decoder, that takes into account the non-linearities of the modulo mappings. We also explain how to optimize the mapping parameters., This work has been funded by Office of Naval Research Global of United States (N62909-15-1-2014), the Xunta de Galicia (ED431C 2016-045, ED341D R2016/012, ED431G/01), the Agencia Estatal de Investigación of Spain (TEC2015-69648-REDC, TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE). The authors thank Prof. Joaquín Míguez of Universidad Carlos III de Madrid, Spain, for his helpful suggestions., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01, United States. Office of Naval Research Global of United States; N62909-15-1-2014
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Study of Machine Learning Techniques for EEG Eye State Detection

  • Laport, Francisco
  • Castro-Castro, Paula-María
  • Dapena, Adriana
  • Vázquez Araújo, Francisco Javier
  • Iglesia, Daniel I.
[Abstract] A comparison of different machine learning techniques for eye state identification through Electroencephalography (EEG) signals is presented in this paper. (1) Background: We extend our previous work by studying several techniques for the extraction of the features corresponding to the mental states of open and closed eyes and their subsequent classification; (2) Methods: A prototype developed by the authors is used to capture the brain signals. We consider the Discrete Fourier Transform (DFT) and the Discrete Wavelet Transform (DWT) for feature extraction; Linear Discriminant Analysis (LDA) and Support Vector Machine (SVM) for state classification; and Independent Component Analysis (ICA) for preprocessing the data; (3) Results: The results obtained from some subjects show the good performance of the proposed methods; and (4) Conclusion: The combination of several techniques allows us to obtain a high accuracy of eye identification., Xunta de Galicia; ED431G2019/01, Xunta de Galicia; ED481A-2018/156, Agencia Estatal de Investigación de España; TEC2016-75067-C4-1-R, This work has been funded by the Xunta de Galicia (ED431G2019/01), the Agencia Estatal de Investigación of Spain (TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE), and the predoctoral Grant No. ED481A-2018/156 (Francisco Laport)
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Towards Post-Quantum Blockchain: A Review on Blockchain Cryptography Resistant to Quantum Computing Attacks

  • Fernández-Caramés, Tiago M.
  • Fraga-Lamas, Paula
[Abstract] Blockchain and other Distributed Ledger Technologies (DLTs) have evolved significantly in the last years and their use has been suggested for numerous applications due to their ability to provide transparency, redundancy and accountability. In the case of blockchain, such characteristics are provided through public-key cryptography and hash functions. However, the fast progress of quantum computing has opened the possibility of performing attacks based on Grover's and Shor's algorithms in the near future. Such algorithms threaten both public-key cryptography and hash functions, forcing to redesign blockchains to make use of cryptosystems that withstand quantum attacks, thus creating which are known as post-quantum, quantum-proof, quantum-safe or quantum-resistant cryptosystems. For such a purpose, this article first studies current state of the art on post-quantum cryptosystems and how they can be applied to blockchains and DLTs. Moreover, the most relevant post-quantum blockchain systems are studied, as well as their main challenges. Furthermore, extensive comparisons are provided on the characteristics and performance of the most promising post-quantum public-key encryption and digital signature schemes for blockchains. Thus, this article seeks to provide a broad view and useful guidelines on post-quantum blockchain security to future blockchain researchers and developers., 10.13039/501100010801-Xunta de Galicia (Grant Number: ED431G2019/01) 10.13039/501100011033-Agencia Estatal de Investigación (Grant Number: TEC2016-75067-C4-1-R and RED2018-102668-T) 10.13039/501100008530-European Regional Development Fund, Xunta de Galicia; ED431G2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Experimental Characterization of LTE Wireless Links in High-Speed Trains

  • Domínguez-Bolaño, Tomás
  • Rodríguez Piñeiro, José
  • García-Naya, José A.
  • Castedo, Luis
[Abstract]: Multimedia and data-based services experienced a nonstopping growth over the last few years. People are continuously on the move using devices to access multimedia contents or other data-based services. Due to this, railway companies are showing a great interest in deploying broadband mobile wireless networks in high-speed-trains with the aim of supporting both passenger services provisioning as well as automatic train control and signaling. Nowadays, the most widely used technology for communications between trains and the railway infrastructure is GSM for Railways (GSM-R); however, it has limited capabilities to support such advanced services. Due to its success in the mass market, Long Term Evolution (LTE) seems to be the best candidate to substitute GSM-R. In this paper, we experimentally characterize the downlink between an LTE Evolved NodeB (eNodeB) and a high-speed train in a commercial high-speed line. We consider two links: the one between the eNodeB and the antennas placed outdoors on the train roof, and the direct link between the eNodeB and a receiver inside the train. Such a characterization consists in assessing the path loss, the Signal to Noise Ratio, the -Factor, the Power Delay Profile, the delay spread, and the Doppler Power Spectral Density., This work has been funded by the Xunta de Galicia (ED431C 2016-045, ED341D R2016/012, and ED431G/01), the Agencia Estatal de Investigación of Spain (TEC2013-47141-C4-1-R, TEC2015-69648-REDC, and TEC2016-75067-C4-1-R), ERDF funds of the EU (AEI/FEDER, UE), and the predoctoral Grant BES-2014-069772. The authors would like to express their gratitude to the personnel from the TECRAIL consortium involved in the measurement campaign., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Measurement-Based Characterization of Train-to-Infrastructure 2.6 GHz Propagation Channel in a Modern Subway Station

  • Domínguez-Bolaño, Tomás
  • Rodríguez Piñeiro, José
  • García-Naya, José A.
  • Yin, Xuefeng
  • Castedo, Luis
[Abstract]: Channel characterization is essential when planning wireless communication deployments. We consider the wireless channel characterization in a modern subway station and its corresponding entrance tunnel, a topic greatly overlooked in the literature. We setup a Long-Term Evolution (LTE) Evolved NodeB (eNodeB) transmitter in the middle of the platform of a modern station in the Madrid Metro, Spain, to cyclically transmit frequency-division duplex (FDD) LTE signals at a carrier frequency of 2.6 GHz with a bandwidth of 10 MHz. Two receivers were used to investigate both the eNodeB-train and the eNodeB-mobile links. The train was moving at a constant speed of 18 km/h from the entrance tunnel until it is completely stopped at the end of the station. Using the multipath components extracted with the space-alternating generalized expectation-maximization (SAGE) algorithm, we characterized the wireless channel response for both links based on the following parameters: power delay profile, root mean square delay spread, Doppler power spectral density, small-scale fading distribution, and K-factor., This work was supported in part by the Xunta de Galicia under Grant ED431C 2016-045, Grant ED341D R2016/012, and Grant ED431G/01, in part by the Agencia Estatal de Investigación of Spain under Grant TEC2015-69648-REDC and Grant TEC2016-75067-C4-1-R, in part by the ERDF funds of the EU (AEI/FEDER, UE), in part by the Predoctoral Grant under Grant BES-2014-069772, and in part by the grant for research stays Estadías Predoutorais de Investigación INDITEX-UDC 2018., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

A Review on Blockchain Technologies for an Advanced and Cyber-Resilient Automotive Industry

  • Fraga-Lamas, Paula
  • Fernández-Caramés, Tiago M.
[Absctract]: In the last century, the automotive industry has arguably transformed society, being one of the most complex, sophisticated, and technologically advanced industries, with innovations ranging from the hybrid, electric, and self-driving smart cars to the development of IoT-connected cars. Due to its complexity, it requires the involvement of many Industry 4.0 technologies, like robotics, advanced manufacturing systems, cyber-physical systems, or augmented reality. One of the latest technologies that can benefit the automotive industry is blockchain, which can enhance its data security, privacy, anonymity, traceability, accountability, integrity, robustness, transparency, trustworthiness, and authentication, as well as provide long-term sustainability and a higher operational efficiency to the whole industry. This review analyzes the great potential of applying blockchain technologies to the automotive industry emphasizing its cybersecurity features. Thus, the applicability of blockchain is evaluated after examining the state-of-the-art and devising the main stakeholders' current challenges. Furthermore, the article describes the most relevant use cases, since the broad adoption of blockchain unlocks a wide area of short- and medium-term promising automotive applications that can create new business models and even disrupt the car-sharing economy as we know it. Finally, after strengths, weaknesses, opportunities, and threats analysis, some recommendations are enumerated with the aim of guiding researchers and companies in future cyber-resilient automotive industry developments., This work was supported in part by the Xunta de Galicia under Grant ED431C 2016-045 and Grant ED431G/01, in part by the Agencia Estatal de Investigación of Spain under Grant TEC2016-75067-C4-1-R, and by ERDF Funds under Grant AEI/FEDER, EU. The work of P. Fraga-Lamas was supported in part by BBVA and in part by the BritishSpanish Society, Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Low-Complexity Distance-Based Scheduling for Multi-User XL-MIMO Systems

  • González-Coma, José P.
  • López-Martínez, F.J.
  • Castedo, Luis
© 2021 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109//LWC.2021.3101940, [Abstract]: We introduce Distance-Based Scheduling (DBS), a new technique for user selection in downlink multi-user communications with extra-large (XL) antenna arrays. DBS categorizes users according to their equivalent distance to the antenna array. Such categorization effectively accounts for inter-user interference while largely reducing the computational burden. Results show that ( i ) DBS achieves the same performance as the reference zero-forcing beamforming scheme with a lower complexity; ( ii ) a simplified version of DBS achieves a similar performance when realistic spherical-wavefront (SW) propagation features are considered; ( iii ) SW propagation brings additional degrees of freedom, which allows for increasing the number of served users., This work was funded by the Xunta de Galicia (ED431G2019/01), the Agencia Estatal de Investigación of Spain (TEC2016-75067-C4-1-R, PID2020-118139RB-I00), ERDF funds of the EU (AEI/FEDER, UE), the Junta de Andalucia and the European Fund for Regional Development FEDER (project P18-RT-3175)
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Time-Modulated Phased Array Controlled With Nonideal Bipolar Squared Periodic Sequences

  • Maneiro-Catoira, Roberto
  • Brégains, Julio
  • García-Naya, José A.
  • Castedo, Luis
© 2019 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/LAWP.2019.2892657., [Abstract]: Bipolar (±1) sequences with no zero state suit particularly well for safeguarding the switched feeding network efficiency when applied to time-modulated arrays. During the zero state of a conventional time-modulating sequence, if a given array element is switched off, a certain amount of energy of the transmitted/received signal is wasted. We propose a novel single sideband time-modulated phased array (TMPA) architecture governed by realistic bipolar squared sequences in which the rise/fall time of the switches is considered. By using single-pole dual-throw switches and nonreconfigurable passive devices, the TMPA exploits, exclusively, the first positive harmonic pattern while exhibiting an excellent performance in terms of efficiency and control level of the undesired harmonics without using synthesis optimization algorithms (software simplicity)., This work has been funded by the Xunta de Galicia (ED431C 2016-045, ED341D R2016/012, ED431G/01), the Agencia Estatal de Investigaci´on of Spain (TEC2015-69648-REDC, TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE)., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Time-Modulated Arrays With Haar Wavelets

  • Maneiro-Catoira, Roberto
  • Brégains, Julio
  • García-Naya, José A.
  • Castedo, Luis
© 2020 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/LAWP.2020.2986832, [Abstract]. Time-modulated arrays (TMAs) can effectively perform beamsteering over the first positive harmonic pattern by applying progressively delayed versions of stair-step approximations of a sine waveform to the antenna excitations. In this letter, we consider synthesizing such stair-step sine approximations by means of Haar wavelets. Haar functions constitute a complete orthonormal set of rectangular waveforms, which have the ability to represent a given function with a high degree of accuracy using few constituent terms. Hence, when they are applied to the TMA synthesis, employing single-pole double-throw switches, such a feature leads to an excellent rejection level of the undesired harmonics as well as a bandwidth greater than that supported by conventional TMAs with on-off switches., This work has been funded by the Xunta de Galicia (ED431G2019/01), the Agencia Estatal de Investigación of Spain (TEC2016-75067-C4-1-R, RED2018-102668-T) and ERDF funds of the EU (AEI/FEDER, UE)., Xunta de Galicia; ED431G2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Time-Modulated Arrays Controlled With Sinusoidal Pulsewidth Modulation

  • Maneiro-Catoira, Roberto
  • Brégains, Julio
  • García-Naya, José A.
  • Castedo, Luis
This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/LAWP.2020.3000463., [Abstract]: In this letter, sinusoidal pulsewidth modulation (PWM) is applied to the design of time-modulated arrays (TMAs). The array excitations are modulated using PWM-synthesized sine waveforms. This provides increased signal bandwidth, excellent rejection of the undesired harmonics, and modulation efficiencies aligned with the best ones in the literature. The simplicity of the technique allows for an easily implementable antenna array feeding network., This work has been funded by the Xunta de Galicia (ED431G2019/01), the Agencia Estatal de Investigación of Spain (TEC2016-75067-C4-1-R, RED2018-102668-T, PID2019-104958RB-C42) and ERDF funds of the EU (AEI/FEDER, UE)., Xunta de Galicia; ED431G2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

A Review on the Application of Blockchain to the Next Generation of Cybersecure Industry 4.0 Smart Factories

  • Fernández-Caramés, Tiago M.
  • Fraga-Lamas, Paula
[Absctract]: Industry 4.0 is a concept devised for improving the way modern factories operate through the use of some of the latest technologies, like the ones used for creating the Industrial Internet of Things (IIoT), robotics, or Big Data applications. One of such technologies is blockchain, which is able to add trust, security, and decentralization to different industrial fields. This article focuses on analyzing the benefits and challenges that arise when using blockchain and smart contracts to develop Industry 4.0 applications. In addition, this paper presents a thorough review of the most relevant blockchain-based applications for Industry 4.0 technologies. Thus, its aim is to provide a detailed guide for the future Industry 4.0 developers that allows for determining how the blockchain can enhance the next generation of cybersecure industrial applications., This work was supported in part by the Xunta de Galicia under Grant ED431C 2016-045 and Grant ED431G/01, in part by the Agencia Estatal de Investigación of Spain under Grant TEC2016-75067-C4-1-R, and in part by ERDF Funds under Grant AEI/FEDER, EU. The work of P. Fraga-Lamas was supported in part by BBVA and in part by the British Spanish Society, Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

A Prototype of EEG System for IoT

  • Laport, Francisco
  • Dapena, Adriana
  • Castro-Castro, Paula-María
  • Vázquez Araújo, Francisco Javier
  • Iglesia, Daniel I.
[Abstract] In this work, we develop open source hardware and software for eye state classification and integrate it with a protocol for the Internet of Things (IoT). We design and build the hardware using a reduced number of components and with a very low-cost. Moreover, we propose a method for the detection of open eyes (oE) and closed eyes (cE) states based on computing a power ratio between different frequency bands of the acquired signal. We compare several real- and complex-valued transformations combined with two decision strategies: a threshold-based method and a linear discriminant analysis. Simulation results show both classifier accuracies and their corresponding system delays., Xunta de Galicia; ED431G2019/01), Agencia Estatal de Investigación de España; TEC2016-75067-C4-1-R, Xunta de Galicia; ED481A-2018/156, Xunta de Galicia; ED431G 2019/01, This work has been funded by the Xunta de Galicia (ED431G2019/01), the Agencia Estatal de Investigacion of Spain (TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE), and the predoctoral Grant No. ED481A-2018/156 (Francisco Laport). CITIC as a Research Centre of the Galician University System is financed by the Conselleria de Educacion, Universidades e Formacion Profesional (Xunta de Galicia) through the ERDF (80%), Operational Programme ERDF Galicia 2014–2020 and the remaining 20% by the Secretaria Xeral de Universidades (Ref. ED431G 2019/01)
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Channel Covariance Identification in FDD Massive MIMO Systems

  • González-Coma, José P.
  • Suárez-Casal, Pedro
  • Castro-Castro, Paula-María
  • Castedo, Luis
  • Joham, Michael
© 2018 IEEE. This version of the paper has been accepted for publication. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The final published paper is available online at: https://doi.org/10.1109/GlobalSIP.2018.8646448, [Abstract]: Many channel estimation methods in Massive MIMO FDD systems usually rely on the knowledge of the channel covariance matrix to operate. However, in real scenarios, this covariance is not known beforehand, and hence it should also be estimated. In this work, we investigate different existing techniques for covariance identification to achieve full knowledge of this matrix with very short training sequences. Moreover, we propose a modification of the spatial smoothing approach with the goal of improving the quality of the channel covariance identification., This work has been funded by Xunta de Galicia (ED431C 2016-045, ED341D R2016/012, ED431G/01), AEI of Spain (TEC2015-69648-REDC, TEC2016-75067-C4-1-R), and ERDF funds (AEI/FEDER, EU)., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

QoS constrained power minimization in the multiple stream MIMO broadcast channel

  • González-Coma, José P.
  • Joham, Michael
  • Castro-Castro, Paula-María
  • Castedo, Luis
This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/ licenses/by-nc-nd/4.0/. This version of the article: González-Coma, J. P., Joham, M., Castro, P. M., & Castedo, L. (2018). 'QoS constrained power minimization in the multiple stream MIMO broadcast channel', has been accepted for publication in Signal Processing, 143, 48–55. The Version of Record is available online at: https://doi.org/10.1016/ j.sigpro.2017.08.015., [Abstract]: This work addresses the design of optimal linear transmit filters for the Multiple Input-Multiple Output (MIMO) Broadcast Channel (BC) when several spatial streams are allocated to each user. We further consider that the Channel State Information (CSI) is perfect at the receivers but is only partial at the transmitter. A statistical model for the partial CSI is assumed and exploited for the filter design. The relationship between average rate and average Mean Square Error (MSE) is studied to determine the optimal way to distribute the per-user rates among the streams. Finally, the feasible average sum-MSE (sMSE) region is studied and the impact of the CSI uncertainty over the overall system performance is evaluated., This work was funded by Xunta de Galicia (ED431C 2016-045, ED341D R2016/012, ED431G/01), AEI of Spain (TEC2013-47141-C4-1-R, TEC2015-69648-REDC, TEC2016-75067-C4-1-R), and ERDF funds (AEI/FEDER, EU)., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Multibeam Single-Sideband Time-Modulated Arrays

  • Maneiro-Catoira, Roberto
  • García-Naya, José A.
  • Brégains, Julio
  • Castedo, Luis
[Abstract]: The design of efficient time-modulated arrays (TMAs) for multi-beam steering purposes must be based on both a type of periodical sequences that guarantees an adequate windowing of exploited harmonics, and a feeding network capable of providing low hardware insertion losses. Compliance with these two requirements is not simple and is aggravated by the fact that, as the number of exploited harmonic beams increases, not only drastically decreases the antenna efficiency, but also the beam steering flexibility. In this work, we propose three different single sideband (SSB) feeding networks for multibeam TMAs constructed considering different combinations of single-pole multiple-throw (SPMT) basic modules. The proposed feeding networks simultaneously accomplish excellent levels of modulation efficiency, reasonable hardware insertion losses, and beam scanning flexibility. In addition, a comparison with standard phased arrays in terms of performance, phase sensitivity, complexity, and cost-effectiveness is carried out., This work was supported in part by the Xunta de Galicia under Grant ED431G2019/01; in part by the Agencia Estatal de Investigación of Spain under Grant TEC2016-75067-C4-1-R, Grant RED2018-102668-T, and Grant PID2019-104958RB-C42; and in part by European Regional Development Fund (ERDF) Funds of the European Union (EU) (FEDER Galicia and Agencia Estatal de Investigación (AEI)/FEDER, EU)., Xunta de Galicia; ED431G2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Propagation modeling for outdoor-to-indoor and indoor-to-indoor wireless links in high-speed train

  • Zhang, Lei
  • Rodríguez Piñeiro, José
  • Fernández, Jean Raphaël Olivier
  • García-Naya, José A.
  • Matolak, David W.
  • Briso-Rodríguez, Cesar
  • Castedo, Luis
This version of the article: Zhang, L., Rodríguez-Piñeiro, J., Fernández, J. R. O., García-Naya, J. A., Matolak, D. W., Briso, C., & Castedo, L. (2017). ‘Propagation modeling for outdoor-to-indoor and indoor-to-indoor wireless links in high-speed train’ has been accepted for publication in: Measurement, 110, 43–52. The Version of Record is available online at https://doi.org/10.1016/j.measurement.2017.06.014., [Abstract]: Nowadays telecommunication companies have shown a great interest in deploying broadband mobile wireless networks in high-speed trains (HSTs) with the aim of supporting both passenger services provisioning as well as automatic train control and signaling. The train carriage, as a confined steel structure, has specific propagation characteristics, which motivates the study of the indoor-to-indoor and outdoor-to-indoor radio propagation characteristics for broadband wireless communication systems in high-speed railways, constituting the main contribution of this work. This study has been performed by means of measurements considering an actual Long Term Evolution (LTE) network deployment, as well as a portable test transmitter and different configurations of antennas and receivers at 2.4, 2.6 and 5.7 GHz in a commercial high-speed rail line in Spain. The results show that radio waves incur obvious waveguiding effects inside the HST car. Moreover, for the propagation from the railway station to a mobile receiver inside the HST car, waves at higher frequencies experience less attenuation through the train carriage, by better propagating through windows. Although the railway station and train interior contain objects that induce a rich set of multipath components, the analysis of small-scale fading statistics shows that the channel still has a dominant path. Also, the LTE coverage tests for Base Transceiver Station (BTS)-Train and BTS-Mobile links were conducted and with internal and external antennas on board the train. We found that there was a strong signal penetration loss of approximately 26 dB caused by the train carriage structure. The final results constitute an initial model for the propagation incurred by a relay-based communications system for fourth generation (4G) network in railways., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01, This work has been developed under the framework of ENABLING 5G TEC2014-55735-C3-2-R funded by the Spanish Ministry of Economy and Competitiveness. This work has been also funded by the Xunta de Galicia (ED431C 2016-045, ED341D R2016/012 and ED431G/01), the Agencia Estatal de Investigación of Spain (TEC2013-47141-C4-1-R, TEC2015-69648-REDC and TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE). Financial support of the China Scholarship Council (CSC) research fellowship given to Lei Zhang is also acknowledged.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Hybrid Precoding With Time-Modulated Arrays for Mmwave MIMO Systems

  • González-Coma, José P.
  • Maneiro-Catoira, Roberto
  • Castedo, Luis
[Abstract]: We consider the utilization of time-modulated arrays (TMAs) as a simple and cost-effective approach to hybrid digital–analog precoding in millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems. Instead of conventional variable phase shifters (VPSs), our proposed TMA hybrid precoders use radio frequency (RF) switches followed by 1-bit VPSs in the analog part. We study the insertion losses at mmWave of a TMA analog precoding network in terms of sideband radiation and hardware efficiency. In addition, we present different algorithms for the design of both the baseband and RF parts of a TMA hybrid precoder. The proposed methods exhibit different tradeoffs between performance, complexity, and power efficiency. Finally, TMA precoders are compared to those implemented with conventional VPSs in terms of insertion losses, chip area, and cost, concluding that precoding with TMAs is a competitive solution for mmWave MIMO systems., This work was supported in part by the Xunta de Galicia under Grant ED431C 2016-045, Grant ED341D R2016/012, and Grant ED431G/01, in part by the AEI of Spain under Grant TEC2015-69648-REDC and Grant TEC2016-75067-C4-1-R, and in part by ERDF funds under Grant AEI/FEDER, EU., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

A Review on the Use of Blockchain for the Internet of Things

  • Fernández-Caramés, Tiago M.
  • Fraga-Lamas, Paula
[Absctract]: Web automation applications are widely used for different purposes such as B2B integration, web mashups, automated testing of web applications, Internet metasearch or technology and business watch. One crucial part in intensive web automation applications, that require real time responses, is for them to execute the navigation sequences in the shortest possible time. The approach of building the automatic web navigation component by using the APIs of conventional browsers, followed by most of the current systems, is not appropriate in that scenario, because it presents performance problems. Other approach consist in creating custom browsers specially designed for web automation, which can develop some improvements based in the peculiarities of the web automation tasks. In this work, we present a new set of techniques and algorithms that allow the parallel evaluation of the scripting code when a custom browser loads a web page. We also outline the components that should be included in the custom browser architecture to implement these techniques. The tests executed with real web sources, to evaluate the validity of our proposal, show that a custom web browser loads the web pages faster when the scripts are executed in parallel using the designed techniques. The paradigm of Internet of Things (IoT) is paving the way for a world, where many of our daily objects will be interconnected and will interact with their environment in order to collect information and automate certain tasks. Such a vision requires, among other things, seamless authentication, data privacy, security, robustness against attacks, easy deployment, and self-maintenance. Such features can be brought by blockchain, a technology born with a cryptocurrency called Bitcoin. In this paper, a thorough review on how to adapt blockchain to the specific needs of IoT in order to develop Blockchain-based IoT (BIoT) applications is presented. After describing the basics of blockchain, the most relevant BIoT applications are described with the objective of emphasizing how blockchain can impact traditional cloud-centered IoT applications. Then, the current challenges and possible optimizations are detailed regarding many aspects that affect the design, development, and deployment of a BIoT application. Finally, some recommendations are enumerated with the aim of guiding future BIoT researchers and developers on some of the issues that will have to be tackled before deploying the next generation of BIoT applications., This work was supported in part by the Xunta de Galicia under Grant ED431C 2016-045, Grant ED341D R2016/012, and Grant ED431G/01, in part by the Agencia Estatal de Investigación of Spain under Grant TEC2015-69648-REDC and Grant TEC2016-75067-C4-1-R, and in part by ERDF funds of EU under Grant AEI/FEDER, UE. The work of P. Fraga-Lamas was supported in part by BBVA and the BritishSpanish Society Grant., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Mobile Application for Analysing the Development of Motor Skills in Children

  • Moreno-Naya, David
  • Vázquez Araújo, Francisco Javier
  • Castro-Castro, Paula-María
  • Vivas-Costa, Jamile
  • Dapena, Adriana
  • González Doniz, Luz
[Abstract] This work presents a mobile application to complement and reinforce the specific physical activities in children through training prior to such activities and monitoring their progress after it. This experiment has been developed on a healthy population of children from an education centre in the area of A Coruña. The results show increasing errors for lower primary school years, as expected, and also strongly dependent on the motor path type or characteristic. Therefore, this tool will be suitable for use with children affected by motor coordination difficulties., This work has been funded by the Xunta de Galicia (ED431G2019/01), the Agencia Estatal de Investigación of Spain (TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE), Xunta de Galicia; ED431G2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Algorithms for determining relative position between spheroids and hyperboloids with one sheet

  • Castro-Castro, Paula-María
  • Dapena, Adriana
  • Souto Salorio, María José
  • Tarrío-Tobar, Ana D.
©2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https:// creativecommons.org/licenses/by-nc-nd/4.0/. This version of the article: Castro, P. M., Dapena, A., Souto- Salorio, M. J., & Tarrío-Tobar, A. D. (2019). 'Algorithms for determining relative position between spheroids and hyperboloids with one sheet', has been accepted for publication in Mathematics and Computers in Simulation, 160, 168–179.The Version of Record is available online at https://doi.org/10.1016/j.matcom.2018.12.006., [Abstract]: In this work we present a new method for determining relative positions between one moving object, modelled by a bounding spheroid, and surrounding static objects, modelled by circular hyperboloids of one sheet. The proposed strategy is based on the real-time calculation of the coefficients of degree three polynomial. We propose several algorithms for two real applications of this geometric problem: the first one, oriented to the design of video games, and the second one, devoted to surveillance tasks of a quadcopter in industrial or commercial environments., This work has been funded by the Xunta de Galicia, Spain (ED431C 2016-045, ED341D R2016/012, ED431G/01), the Agencia Estatal de Investigación of Spain (TEC2013-47141-C4-1-R, TEC2015-69648-REDC, TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE). The authors wish to thank José Sanmartín for his helpful work in the graphic design of the pictures included in this paper., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Hardware and Software for Integrating Brain Computer Interface and Internet of Things

  • Laport, Francisco
  • Vázquez Araújo, Francisco Javier
  • Castro-Castro, Paula-María
  • Dapena, Adriana
Presented at: 8th International Work-Conference on the Interplay Between Natural and Artificial Computation, IWINAC 2019, Almería, 3 June 2019 through 7 June 2019, This version of the article has been accepted for publication, after peer review (when applicable) and is subject to Springer Nature’s AM terms of use, but is not the Version of Record and does not reflect post-acceptance improvements, or any corrections. The Version of Record is available online at: http://dx.doi.org/10.1007/978-3-030-19591-5_3, [Abstract]: This work shows a system that appropriately integrates a Brain–Computer Interface and an Internet of Things environment based on eye state identification. The Electroencephalography prototype for brain electrical signal acquisition has been designed by the authors. This prototype uses only one electrode and its size is very small, which facilitates its use for all type of applications. We also design a classifier based on the simple calculation of a threshold ratio between alpha and beta rhythm powers. As shown from some experiment results, this threshold-based classifier shows high accuracies for medium response times, and according to that state identification any smart home environment with those response requirements could correctly act, for example ON–OFF switching room lights., This work has been funded by the Xunta de Galicia (ED431C 2016-045, ED341D R2016/012, ED431G/01), the Agencia Estatal de Investigación of Spain (TEC2015-69648-REDC, TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE), and the predoctoral grant (ED481A-2018/156), Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

An IoT and Blockchain Based System for Monitoring and Tracking Real-Time Occupancy for COVID-19 Public Safety

  • Fernández-Caramés, Tiago M.
  • Froiz-Míguez, Iván
  • Fraga-Lamas, Paula
The conference was held online, 15-30 November 2020., [Abstract]: The COVID-19 pandemic has brought several limitations regarding physical distancing in order to reduce the interactions among large groups that could have prolonged close contact. For health reasons, such physical distancing requirements should be guaranteed in private and public spaces. In Spain, occupancy is restricted by law but, in practice, certain spaces may become overcrowded, existing law infringements in places that rely on occupancy estimations that are not accurate enough. For instance, although the number of passengers who enter a public transportation service is known, it is difficult to determine the actual occupancy of such a vehicle, since it is commonly unknown when and where passengers descend. Despite a number of counting systems existing, they are either prone to counting errors in overcrowded scenarios or require the active involvement of the people to be counted (e.g., going through a lathe or tapping a card when entering or exiting a monitored area) or of a person who manages the entering/exit process. This paper presents a novel IoT occupancy system that allows estimating in real time the people occupancy level of public spaces such as buildings, classrooms, businesses or moving transportation vehicles. The proposed system is based on autonomous wireless devices that, after powering them on, do not need active actions from the passengers/users and require a minimum amount of infrastructure. The system does not collect any personal information to ensure user privacy and includes a decentralized traceability subsystem based on blockchain, which guarantees the availability, security and immutability of the collected information. Such data will be shared among smart city stakeholders to ensure public safety and then deliver transparent decision-making based on data-driven analysis and planning., This work was funded by the Xunta de Galicia (by grant ED431C 2020/15, as well as grant ED431G 2019/01 to support the Centro de Investigación de Galicia “CITIC”), the Agencia Estatal de Investigación of Spain (by grants TEC2016-75067-C4-1-R, RED2018-102668-T and PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia 2014-2020 and AEI/FEDER Programs, UE)., Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED431G 2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Dual-Signal Transmission Using RF Precoding and Analog Beamforming With TMAs

  • Maneiro-Catoira, Roberto
  • Brégains, Julio
  • García-Naya, José A.
  • Castedo, Luis
This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/LCOMM.2018.2848274., [Abstract]: Time-modulated arrays (TMAs) receiving beamforming provide a noteworthy hardware simplicity given the ability of this multi-antenna technique to transform spatial diversity into frequency diversity. However, the dual behavior at transmission seems to be as simple as limited: a given signal is simultaneously transmitted over all the different TMA harmonic patterns. We investigate the efficient and simultaneous transmission of two different signals over the same physical antenna using two independent harmonic beam-patterns of the TMA. For that purpose, we propose an innovative dual-signal TMA transmitter based on two complementary operations: the complex mixing of the baseband signals and the TMA processing with quadrature and time-delayed periodic pulses., This work has been funded by the Xunta de Galicia (ED431C 2016-045, ED341D R2016/012, ED431G/01), the Agencia Estatal de Investigación of Spain (TEC2015-69648-REDC, TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE)., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Analysis, Design and Practical Validation of an Augmented Reality Teaching System Based on Microsoft HoloLens 2 and Edge Computing

  • Vidal-Balea, Aida
  • Blanco, Óscar
  • Picallo, Imanol
  • Celaya-Echarri, Mikel
  • Fraga-Lamas, Paula
  • López Iturri, Peio
  • Azpilicueta, Leyre
  • Falcone, Francisco
  • Fernández-Caramés, Tiago M.
[Absctract]: In recent years, the education sector has incorporated the use of new technologies and computing devices into classrooms, which allowed for implementing new ways for enhancing teaching and learning. One of these new technologies is augmented reality (AR), which enables creating experiences that mix reality and virtual elements in an attractive and visual way, thus helping teachers to foster student interest in learning certain subjects and abstract concepts in novel visual ways. This paper proposes to harness the potential of the latest AR devices in order to enable giving AR-enabled lectures and hands-on labs. Specifically, it proposes an architecture for providing low-latency AR education services in a classroom or a laboratory. Such a low latency is achieved thanks to the use of edge computing devices, which offload the cloud from the traditional tasks that are required by dynamic AR applications (e.g., near real-time data processing, communications among AR devices). Depending on the specific AR application and the number of users, the wireless link (usually WiFi) could be overloaded if the network has not been properly designed, and the overall performance of the application can be compromised, leading to high latency and even to wireless communication failure. In order to tackle this issue, radio channel measurements and simulation results have been performed by means of an in-house developed 3D ray-launching tool, which is able to model and simulate the behaviour of an AR-enabled classroom/laboratory in terms of radio propagation and quality of service. To corroborate the obtained theoretical results, a Microsoft HoloLens 2 teaching application was devised and tested, thus demonstrating the feasibility of the proposed approach., This work has been funded by the Xunta de Galicia (by grant ED431C 2020/15, and grant ED431G 2019/01 to support the Centro de Investigación de Galicia “CITIC”), the Agencia Estatal de Investigación of Spain (by grants TEC2016-75067-C4-1-R, RED2018-102668-T and PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia 2014-2020 and AEI/FEDER Programs, UE)., Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED431G 2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Analog Transmission of Correlated Sources Over Fading SIMO Multiple Access Channels

  • Suárez-Casal, Pedro
  • Fresnedo, Óscar
  • Castedo, Luis
  • Garcia-Frias, Javier
© 2017 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/TCOMM.2017.2695197., [Abstract]: Joint source-channel coding for discrete-time analog sources is an appealing transmission approach because of its extremely low delay and complexity. When the users access the channel orthogonally, analog transmission of correlated information over fading multiple access channels (MACs) using modulo-like mappings provides better performance than uncoded transmission. In this paper, we propose a simplified decoder for modulo mappings in possibly non-orthogonal MAC scenarios with a single-antenna users and a multiple-antenna receiver. Sphere decoding is investigated to reduce the computational complexity when the number of users is large. In addition, affordable strategies are proposed to optimize the mapping parameters according to the channel conditions and the source correlation. The obtained results show that the use of modulo mappings is suitable when the number of antennas at the receiver is larger than the number of users and for high correlation between user data., This work has been funded by the ONRG of United States (N62909-15-1-2014), the NSF (award CCF-1618653), Xunta de Galicia (ED431C 2016-045), the Agencia Estatal de Investigación of Spain (TEC2013-47141-C4-1-R, TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE)., United States. Office of Naval Research; N62909-15-1-2014, United States. National Science Foundation; CCF-1618653, Xunta de Galicia; ED431C 2016-045
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Building Decentralized Fog Computing-Based Smart Parking Systems: From Deterministic Propagation Modeling to Practical Deployment

  • Celaya-Echarri, Mikel
  • Froiz-Míguez, Iván
  • Azpilicueta, Leyre
  • Fraga-Lamas, Paula
  • López Iturri, Peio
  • Falcone, Francisco
  • Fernández-Caramés, Tiago M.
[Abstract] The traditional process of finding a vacant parking slot is often inefficient: it increases driving time, traffic congestion, fuel consumption and exhaust emissions. To address such problems, smart parking systems have been proposed to help drivers to find available parking slots faster using latest sensing and communications technologies. However, the deployment of the communications infrastructure of a smart parking is not straightforward due to multiple factors that may affect wireless propagation. Moreover, a smart parking system needs to provide not only accurate information on available spots, but also fast responses while guaranteeing the system availability even in the case of lacking connectivity. This article describes the development of a decentralized low-latency smart parking system: from its conception, design and theoretical simulation, to its empirical validation. Thus, this work first characterizes a real-world scenario and proposes a fog computing and Internet of Things (IoT) based communications architecture to provide smart parking services. Next, a thorough analysis on the wireless channel properties is carried out by means of an in-house developed deterministic 3D-Ray Launching (3D-RL) tool. The obtained results are validated through a real-world measurement campaign and then the communications architecture is implemented by using ZigBee sensor nodes. The implemented architecture also makes use of Bluetooth Low Energy beacons, an Android app, a decentralized database and fog computing gateways, whose performance is evaluated in terms of response latency and processing rate. Results show that the proposed system is able to deliver information to the drivers fast, with no need for relying on remote servers. As a consequence, the presented development methodology and communications evaluation tool can be useful for future smart parking developers, which can determine the optimal locations of the wireless transceivers during the simulation stage and then deploy a system that can provide fast responses and decentralized services., Xunta de Galicia; ED431G2019/01, Agencia Estatal de Investigación of Spain; TEC2016-75067-C4-1-R, Agencia Estatal de Investigación of Spain; RED2018-102668-T, Agencia Estatal de Investigación of Spain; PID2019-104958RB-C42, Ministerio de Ciencia, Innovación y Universidades; RTI2018-095499-B-C31
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Service-Learning Projects in University Degrees Based on Sustainable Development Goals: Proposals and Results

  • Castro-Castro, Paula-María
  • Ares-Pernas, Ana
  • Dapena, Adriana
[Abstract] We present several Service-Learning projects developed considering Sustainable Development Goals to provide the students skills for the support of a sustainable society. This project begins with collecting initial impressions from surveys and reflections to know both the students’ expectations and their degree of involvement in the development of a sustainable society. Next, the students design academic projects taking into account the needs of the specific collective to which the Service-Learning activity is oriented. When this design has finished, such projects are developed with the users and the activity is evaluated. During 2019–2020, these projects were done with four entities oriented to people either with Asperger’s syndrome, Down syndrome, Alzheimer’s disease or mental health illnesses. A total of 35 and 10 students, respectively, from the Bachelor’s Degree of Engineering in Industrial Design and Product Development and from the Master’s Degree in Professorship of High School have participated in this experience. We analyze the results from the perspective of the different agents involved, considering both qualitative and quantitative metrics. The results show that both users and staff are satisfied with this collaboration between the university and their entities. Moreover, this experience clearly has contributed to a better personal and professional student’s development., This work has been funded by the Xunta de Galicia-FEDER (ED431C 2020/15 and ED431G2019/01 to support the Centro de Investigación de Galicia “CITIC”), the Agencia Estatal de Investigación of Spain (TEC2016-75067-C4-1-R, RED2018-102668-T, PID2019-104958RB-C42), and ERDF funds of the EU (AEI/FEDER, UE), Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED431G2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

From Pre-Quantum to Post-Quantum IoT Security: A Survey on Quantum-Resistant Cryptosystems for the Internet of Things

  • Fernández-Caramés, Tiago M.
© 2020 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., [Absctract]: Although quantum computing is still in its nascent age, its evolution threatens the most popular public-key encryption systems. Such systems are essential for today's Internet security due to their ability for solving the key distribution problem and for providing high security in insecure communications channels that allow for accessing websites or for exchanging e-mails, financial transactions, digitally signed documents, military communications or medical data. Cryptosystems like Rivest-Shamir-Adleman (RSA), elliptic curve cryptography (ECC) or Diffie-Hellman have spread worldwide and are part of diverse key Internet standards like Transport Layer Security (TLS), which are used both by traditional computers and Internet of Things (IoT) devices. It is especially difficult to provide high security to IoT devices, mainly because many of them rely on batteries and are resource constrained in terms of computational power and memory, which implies that specific energy-efficient and lightweight algorithms need to be designed and implemented for them. These restrictions become relevant challenges when implementing cryptosystems that involve intensive mathematical operations and demand substantial computational resources, which are often required in applications where data privacy has to be preserved for the long term, like IoT applications for defense, mission-critical scenarios or smart healthcare. Quantum computing threatens such a long-term IoT device security and researchers are currently developing solutions to mitigate such a threat. This article provides a survey on what can be called post-quantum IoT systems (IoT systems protected from the currently known quantum computing attacks): the main post-quantum cryptosystems and initiatives are reviewed, the most relevant IoT architectures and challenges are analyzed, and the expected future trends are indicated. Thus, this article is aimed at providing a wide view of post-quantum IoT security and give useful guidelines..., This work was supported in part by the Xunta de Galicia under Grant ED431G2019/01, in part by the Agencia Estatal de Investigación of Spain under Grant TEC2016-75067-C4- 1-R and Grant RED2018-102668-T, and in part by ERDF funds of the EU (AEI/FEDER, UE)., Xunta de Galicia; ED431G2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Time-modulated array beamforming with periodic stair-step pulses

  • Maneiro-Catoira, Roberto
  • Brégains, Julio
  • García-Naya, José A.
  • Castedo, Luis
© 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/. This version of the article: Maneiro-Catoira, R., Brégains, J., García-Naya, J. A., & Castedo, L. (2020). “Time-modulated array beamforming with periodic stair-step pulses”, has been accepted for publication in Signal Processing, 166(107247). The Version of Record is available online at https://doi.org/10.1016/j.sigpro.2019.107247., [Abstract]: Time-modulated arrays (TMAs) are able to improve the side-lobe level of the radiation pattern at the fundamental mode but cannot steer the beam at such a mode towards a given direction. Beam-steering is possible in a TMA, but only at the harmonic patterns and at the expense of a severe TMA efficiency reduction. In this work we propose a TMA approach that simultaneously performs both features over the same beam by using two sets of switches: (1) single-pole four-throw switches to generate periodic stair-step pulses suitable for efficiently synthesizing a uniform steerable beam over the first positive harmonic, and (2) single-pole single-throw switches to reconfigure the side-lobe level of the previous beam. Performance, small size, cost-effectiveness, and performance invariability with the carrier frequency are features that make this TMA approach a competitive solution for analog beamforming. Accordingly, the structure is an attractive proposal for the design of multibeam transceivers., This work has been funded by the Xunta de Galicia (ED431C 2016-045, ED431G/01), the Agencia Estatal de Investigación of Spain (TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE)., Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Design, Implementation, and Empirical Validation of an IoT Smart Irrigation System for Fog Computing Applications Based on LoRa and LoRaWAN Sensor Nodes

  • Froiz-Míguez, Iván
  • López Iturri, Peio
  • Fraga-Lamas, Paula
  • Celaya-Echarri, Mikel
  • Blanco, Óscar
  • Azpilicueta, Leyre
  • Falcone, Francisco
  • Fernández-Caramés, Tiago M.
[Absctract]: Climate change is driving new solutions to manage water more efficiently. Such solutions involve the development of smart irrigation systems where Internet of Things (IoT) nodes are deployed throughout large areas. In addition, in the mentioned areas, wireless communications can be difficult due to the presence of obstacles and metallic objects that block electromagnetic wave propagation totally or partially. This article details the development of a smart irrigation system able to cover large urban areas thanks to the use of Low-Power Wide-Area Network (LPWAN) sensor nodes based on LoRa and LoRaWAN. IoT nodes collect soil temperature/moisture and air temperature data, and control water supply autonomously, either by making use of fog computing gateways or by relying on remote commands sent from a cloud. Since the selection of IoT node and gateway locations is essential to have good connectivity and to reduce energy consumption, this article uses an in-house 3D-ray launching radio-planning tool to determine the best locations in real scenarios. Specifically, this paper provides details on the modeling of a university campus, which includes elements like buildings, roads, green areas, or vehicles. In such a scenario, simulations and empirical measurements were performed for two different testbeds: a LoRaWAN testbed that operates at 868 MHz and a testbed based on LoRa with 433 MHz transceivers. All the measurements agree with the simulation results, showing the impact of shadowing effects and material features (e.g., permittivity, conductivity) in the electromagnetic propagation of near-ground and underground LoRaWAN communications. Higher RF power levels are observed for 433 MHz due to the higher transmitted power level and the lower radio propagation losses, and even in the worst gateway location, the received power level is higher than the sensitivity threshold (−148 dBm). Regarding water consumption, the provided estimations indicate that the proposed smart irrigation system is able to reduce roughly 23% of the amount of used water just by considering weather forecasts. The obtained results provide useful guidelines for future smart irrigation developers and show the radio planning tool accuracy, which allows for optimizing the sensor network topology and the overall performance of the network in terms of coverage, cost, and energy consumption., This work has been funded by the Xunta de Galicia (by Grant No. ED431C 2020/15, and Grant No. ED431G 2019/01 to support the Centro de Investigación de Galicia “CITIC”), the Agencia Estatal de Investigación of Spain (by grants RTI2018-095499-B-C31, TEC2016-75067-C4-1-R, RED2018-102668-T, and PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia 2014-2020 and AEI/FEDER Programs, UE)., Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED431G 2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Design of Linear Precoders for Correlated Sources in MIMO Multiple Access Channels

  • Suárez-Casal, Pedro
  • González-Coma, José P.
  • Fresnedo, Óscar
  • Castedo, Luis
© 2018 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/TCOMM.2018.2863362, [Abstract]: This paper focuses on distributed linear precoding when users transmit correlated information over a fading multiple-input and multiple-output multiple access channel. The precoders are optimized in order to minimize the sum-mean square error (MSE) between the source and the estimated symbols. When sources are correlated, minimizing the sum-MSE results in a non-convex optimization problem. The precoders for an arbitrary number of users and transmit and receive antennas are thus obtained via a projected steepest-descent algorithm and a low-complexity heuristic approach. For the more restrictive case of two single-antenna users, a closed-form expression for the minimum sum-MSE precoders is derived. Moreover, for the scenario with a single receive antenna and any number of users, a solution is obtained by means of a semi-definite relaxation. Finally, we also consider precoding schemes where the precoders are decomposed into complex scalars and unit norm vectors. Simulation results show a significant improvement when source correlation is exploited at precoding, especially for low signal-to-noise ratios and when the number of receive antennas is lower than the number of transmitting nodes., This work has been funded by Office of Naval Research Global of United States (N62909-15-1-2014), the Xunta de Galicia (ED431C 2016-045, ED341D R2016/012, ED431G/01), the Agencia Estatal de Investigación of Spain (TEC2015-69648-REDC, TEC2016-75067-C4-1-R) and ERDF funds of the EU (AEI/FEDER, UE)., United States. Office of Naval Research Global of United States; N62909-15-1-2014, Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED341D R2016/012, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Numerical Model of a 28-GHz Frequency Diverse Array Antenna

  • Angoue Avele, Marc Bernice
  • Brégains, Julio
  • Maneiro-Catoira, Roberto
  • García-Naya, José A.
  • Castedo, Luis
[Abstract] In this work we make use of the frequency diverse array (FDA) concept, whose design is based upon a frequency increment across the antenna elements to generate a beam steering that is a function of angle, time and range. For a possible use of this technique in 5G detection systems, a 28-GHz FDA numerical model, designed with help of a software tool, is analyzed. Some practical conclusions are drawn from the presented results., This research received This work has been funded by the Xunta de Galicia (ED431G2019/01), the Agencia Estatal de Investigación of Spain (TEC2016-75067-C4-1-R, RED2018-102668-T, PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia & AEI/FEDER, UE), Xunta de Galicia; ED431G2019/01