Pasar al contenido principal

RED COMONSENS

RED2018-102668-T

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Redes Investigación /Redes Excelencia
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 51
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improved Aures tonality metric for complex sounds

  • Estreder-Campos, Juan|||0000-0001-9728-4422
  • Piñero, Gema|||0000-0002-8719-8106
  • de Diego Antón, María|||0000-0001-9948-3396
  • Ramo, Jussi
  • Välimäki, Vesa
[EN] This paper proposes improvements to the Aures' tonality metric, which can be used for estimating the frequency masking of complex sounds. The perception of tonality has been extensively studied in simple sounds, such as pure tones and narrowband noise signals, but there are no solid conclusions in the case of complex sounds. Previously, Aures' method has been mostly used in the psychoacoustic analysis of noise signals. The modifications presented here are a better spectral resolution, a lowered tonal threshold, and a different exponent in one of their weighting functions. These may appear to be minor changes from the original Aures (OA) method, but they have proven to be significant for perception. The improved Aures (IA) method has been validated by a subjective test using three different multitone signals in the presence of a narrowband noise, whose result is the subjectively perceived masking thresholds. Results show that the IA method presents an average error of 0.8 dB when predicting the subjective masking thresholds provided by the test, while the average errors of the OA and a baseline spectral flatness method exceed 5 dB. In addition, a second subjective test has been carried out to assess the perceptual equalization of a music signal using the proposed IA and spectral flatness methods. The second test confirms that the IA method is preferred. Therefore, the improved Aures method is proposed as a reliable tonality metric for complex sounds, such as multi-tone signals and music., This work has been partially supported by the GVA Regional Government through PROMETEO/2019/109, the Spanish Government through BES-2016-077899 and RED2018-102668-T, and the European Union together with the Spanish Government through RTI2018-098085-BC41 (MCIU/AEI/FEDER) . This research is also part of the activities of the "Nordic Sound and Music Computing Network" (NordicSMC), NordForsk project No. 86892. Juan Estreder's work has been carried out partly during his research stay at the Acoustics Lab of Aalto University.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-complexity soft ML detection for generalized spatial modulation

  • Simarro, M. Angeles|||0000-0001-6238-2532
  • García Mollá, Víctor Manuel|||0000-0003-4768-7367
  • Martínez Zaldívar, Francisco José|||0000-0002-7845-6273
  • Gonzalez, Alberto|||0000-0002-6984-3212
[EN] Generalized Spatial Modulation (GSM) is a recent Multiple-Input Multiple-Output (MIMO) scheme, which achieves high spectral and energy efficiencies. Specifically, soft-output detectors have a key role in achiev-ing the highest coding gain when an error-correcting code (ECC) is used. Nowadays, soft-output Maxi-mum Likelihood (ML) detection in MIMO-GSM systems leads to a computational complexity that is un-feasible for real applications; however, it is important to develop low-complexity decoding algorithms that provide a reasonable computational simulation time in order to make a performance benchmark available in MIMO-GSM systems. This paper presents three algorithms that achieve ML performance. In the first algorithm, different strategies are implemented, such as a preprocessing sorting step in order to avoid an exhaustive search. In addition, clipping of the extrinsic log-likelihood ratios (LLRs) can be incor-porating to this algorithm to give a lower cost version. The other two proposed algorithms can only be used with clipping and the results show a significant saving in computational cost. Furthermore clipping allows a wide-trade-off between performance and complexity by only adjusting the clipping parameter., Acknowledgements This work has been partially supported by Spanish Ministry of Science, Innovation and Universities and by European Union through grant RTI2018-098085-BC41 (MCUI/AEI/FEDER) , by GVA
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Personal Sound Zones by Subband Filtering and Time Domain Optimization

  • Molés-Cases, Vicent
  • Piñero, Gema|||0000-0002-8719-8106
  • de Diego Antón, María|||0000-0001-9948-3396
  • Gonzalez, Alberto|||0000-0002-6984-3212
[EN] Personal Sound Zones (PSZ) systems aim to render independent sound signals to multiple listeners within a room by using arrays of loudspeakers. One of the algorithms used to provide PSZ is Weighted Pressure Matching (wPM), which computes the filters required to render a desired response in the listening zones while reducing the acoustic energy arriving to the quiet zones. This algorithm can be formulated in time and frequency domains. In general, the time-domain formulation (wPM-TD) can obtain good performance with shorter filters and delays than the frequency-domain formulation (wPM-FD). However, wPM-TD requires higher computation for obtaining the optimal filters. In this article, we propose a novel approach to the wPM algorithm named Weighted Pressure Matching with Subband Decomposition (wPMSD), which formulates an independent time-domain optimization problem for each of the subbands of a Generalized Discrete Fourier Transform (GDFT) filter bank. Solving the optimization independently for each subband has two main advantages: 1) lower computational complexity than wPM-TD to compute the optimal filters; 2) higher versatility than the classic wPM algorithms, as it allows different configurations (sets of loudspeakers, filter lengths, etc.) in each subband. Moreover, filtering the input signals with a GDFT filter bank (as in wPM-SD) requires lower computational effort than broadband filtering (as in wPM-TD and wPM-FD), which is beneficial for practical PSZ systems. We present experimental evaluations showing that wPM-SD offers very similar performance to wPM-TD. In addition, two cases where the versatility of wPM-SD is beneficial for a PSZ system are presented and experimentally validated., This work was supported by Grants RTI2018-098085-B-C41 (MCIU/AEI/FEDER, UE), RED2018-102668-T and PROMETEO/2019/109. The work of Vicent Moles-Cases has been supported by Spanish Ministry of Education under Grant FPU17/01288.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Parallel signal detection for generalized spatial modulation MIMO systems

  • García Mollá, Víctor Manuel|||0000-0003-4768-7367
  • Simarro, M. Angeles|||0000-0001-6238-2532
  • Martínez Zaldívar, Francisco José|||0000-0002-7845-6273
  • Alonso-Jordá, Pedro|||0000-0002-6882-6592
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • Boratto, Murilo
[EN] Generalized Spatial Modulation is a recently developed technique that is designed to enhance the efficiency of transmissions in MIMO Systems. However, the procedure for correctly retrieving the sent signal at the receiving end is quite demanding. Specifically, the computation of the maximum likelihood solution is computationally very expensive. In this paper, we propose a parallel method for the computation of the maximum likelihood solution using the parallel computing library OpenMP. The proposed parallel algorithm computes the maximum likelihood solution faster than the sequential version, and substantially reduces the worst-case computing times., This work has been partially supported by the Spanish Ministry of Science, Innovation and Universities and by the European Union through grant RTI2018- 098085-BC41 (MCUI/AEI/FEDER), by GVA through PROMETEO/2019/109, and by RED 2018-102668-T. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multi-tone Active Noise Equalizer with Spatially Distributed User-selected Profiles

  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • de Diego Antón, María|||0000-0001-9948-3396
  • Piñero, Gema|||0000-0002-8719-8106
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • Hassani, Amin
  • Moonen, Marc
[EN] In this work we propose a multi-channel active noise equalizer (ANE) that can deal with multi-frequency noise signals and assigns simultaneously different equalization gains to each frequency component at each monitoring sensor. For this purpose, we state a pseudo-error noise signal for each sensor of the ANE, which has to be cancelled out in order to get the desired equalization profiles. Firstly the optimal analytic solution for the ANE filters in the case of single-frequency noise is provided, and an adaptive algorithm based on the Least Mean Squared (LMS) is proposed for the same case. We also show that this adaptive strategy reaches the theoretical solution in steady state. Secondly, we state an equivalent approach for the case of multi-frequency noise based on two alternatives: a common pseudo-error signal at each sensor for all frequencies, and a different pseudo-error signal at each sensor for each frequency. The analytic and adaptive solutions for the ANE control filters have been developed for both pseudo-error alternatives. Finally, the ability of the proposed ANE to achieve simultaneously different user-selected noise profiles in different locations has been validated by their transfer functions and simulations., This work was supported by EU jointly with Spanish Government and Generalitat Valenciana under Grants RTI2018-098085-BC41, PID2021-125736OB-I00 (MCIU/AEI/FEDER), RE D2018-102668-T, and PROMETEO/2019/109.
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Design and experimental validation of an augmented reality system with wireless integration for context aware enhanced show experience in auditoriums

  • Picallo Guembe, Imanol
  • Vidal Balea, Aida
  • Blanco Novoa, Óscar
  • López Iturri, Peio
  • Fraga Lamas, Paula
  • Klaina , Hicham
  • Fernández Caramés, Tiago M.
  • Azpilicueta, Leyre
  • Falcone Lanas, Francisco
The development of multiple cultural and social related activities, such as shows related with the performing arts, conferences or presentations rely on facilities such as auditoriums, theatres and conference sites, which are progressively including multiple technological features in order to enhance user experience. There are still however situations in which user experience is limited owing to lack of environment adaption, such as people with disabilities. In this sense, the adoption of Context Aware paradigms within auditoriums can provide adequate functionalities in order to comply with specific needs. This work is aimed at demonstrating the feasibility in enhancing user experience (e.g., improving the autonomy of disabled people) within auditorium and theatre environments, by means of an Augmented Reality (AR) device (HoloLens smart glasses) with wireless system integration. To carry out the demonstration, different elements to build AR applications are described and tested. First, an intensive measurement campaign was performed in a real auditorium in the city of Pamplona (Baluarte Congress Center) in order to evaluate the feasibility of using Wi-Fi enabled AR devices in a complex wireless propagation scenario. The results show that these environments exhibit high levels of interference, owing to the co-existence and non-coordinated operation of multiple wireless communication systems, such as on site and temporary Wi-Fi access points, wireless microphones or communications systems used by performers, staff and users. Deterministic wireless channel estimation based in volumetric 3D Ray Launching have been obtained for the complete scenario volume, in order to assess quality of service metrics. For illustration purposes, a user-friendly application to help hearing impaired people was developed and its main features were tested in the auditorium. Such an application provides users with a 3D virtual space to visualize useful multimedia content like subtitles or additional information about the show, as well as an integrated call button., Xunta de Galicia | Ref. ED431G 2019/01, Agencia Estatal de Investigación | Ref. TEC2016-75067-C4-1-R, Agencia Estatal de Investigación | Ref. RED2018-102668-T, Agencia Estatal de Investigación | Ref. PID2019-104958RB-C42, Ministerio de Ciencia, Innovación y Universidades | Ref. RTI2018-095499-B-C31
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Trabajos fin de grado para el desarrollo de competencias de la titulación mediante un servicio a personas con diversidad funcional y cognitiva

  • Castro, Paula M.
  • Fresnedo, Óscar
  • Dapena, Adriana
  • Pereira, Javier
Aprendizaje y servicio es un modelo pedagógico orientado a la adquisición de competencias transversales y específicas de los títulos a través de la colaboración con entidades sin ánimo de lucro. Este artículo muestra una experiencia, iniciada en el curso académico 2019-2020, para el desarrollo de Trabajos Fin de Grado (TFG) en el Grado en Ingeniería Informática. Los tres objetivos básicos de esta experiencia son: 1) garantizar la adquisición de las competencias específicas y transversales; 2) formar profesionales con responsabilidad social y 3) prestar un servicio adaptado a las necesidades específicas de entidades de nuestro entorno dedicadas a personas con diversidad funcional y/o cognitiva. La experiencia que se ha desarrollado a lo largo de este curso académico abarca dos proyectos realizados en colaboración con asociaciones que trabajan con personas con parálisis cerebral y con niños con trastorno de espectro autista.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

User Grouping for the Uplink of Multiuser Hybrid mmWave MIMO

  • Pérez-Adán, Darian
  • Fresnedo, Óscar
  • González-Coma, José P.
  • Castedo, Luis
[Abstract] Hybrid analog/digital schemes for precoding/combining have proved to be a low-complexity and/or low-power strategy to obtain reasonable beamforming gains in multiuser millimeter-wave (mmWave) multiple-input multiple-output (MIMO) systems. Hybrid precoding/combining performs jointly baseband processing and analog processing in the radio frequency (RF) domain. In these systems, the number of RF chains limits the maximum number of streams simultaneously handled by the transceivers. In the uplink of a multiuser mmWave MIMO system, the hardware reduction based on hybrid transceivers is limited by the number of data streams that must be simultaneously served by the centralized node. Most works approach hybrid transceiver design by considering more RF chains than data streams, an unrealistic assumption when the number of nodes is large. On the other hand, statistically independent information is conventionally assumed in multiuser mmWave systems. This assumption does not hold in scenarios like wireless sensor networks (WSNs), where the sources produce correlated information. In this paper, by enabling inter-user correlation exploitation, we propose a grouping approach to handle a high number of individual sources with a limited number of RF chains through distributed quantizer linear coding (DQLC) mappings. The allocation of the users per group and the hybrid design of the combiner at the common central node to serve the grouped users is also analyzed. We also propose a hybrid minimum mean square error (MMSE) combining design in order to exploit the spatial correlation between the sources in a conventional uncoded mmWave uplink. Simulation results show the performance advantages of the proposed approaches in various hardware-constrained system settings., 10.13039/501100010801-Xunta de Galicia (Grant Number: ED431G2019/01) 10.13039/501100011033-Agencia Estatal de Investigaci??n (Grant Number: TEC2016-75067-C4-1-R, RED2018-102668-T and PID2019-104958RB-C42) BES-2017-081955, Xunta de Galicia; ED431G2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

A TMA-FDA Approach for Two-Beam Steering

  • Maneiro-Catoira, Roberto
  • Brégains, Julio
  • García-Naya, José A.
  • Castedo, Luis
This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/LAWP.2021.3101362., [Abstract]: Frequency diverse arrays (FDAs) allow the synthesis of dot-shaped radiated patterns in the range-angle space by applying frequency offsets to the antenna elements. Conventional FDAs are usually implemented with costly variable phase shifters and mixers and require an independent feeding network per beam for multibeam operation. In this letter, we propose an innovative approach to FDA that makes use of time-modulated array (TMA) building blocks modeled with inexpensive single-pole dual-throw switches. Our approach is able to simultaneously and independently steer two dot-shaped beam patterns, over the two most significant TMA harmonics, with an almost 90% time modulation efficiency., This work has been funded by the Xunta de Galicia (by grant ED431C 2020/15, and grant ED431G 2019/01 to support the Centro de Investigación de Galicia “CITIC”), the Agencia Estatal de Investigación of Spain (by grants RED2018-102668-T and PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia 2014-2020 & AEI/FEDER Programs, UE)., Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED431G 2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Fake News, Disinformation, and Deepfakes: Leveraging Distributed Ledger Technologies and Blockchain to Combat Digital Deception and Counterfeit Reality

  • Fraga-Lamas, Paula
  • Fernández-Caramés, Tiago M.
[Absctract]: The rise of ubiquitous deepfakes, misinformation, disinformation, and post-truth, often referred to as fake news, raises concerns over the role of the Internet and social media in modern democratic societies. Due to its rapid and widespread diffusion, digital deception has not only an individual or societal cost, but it can lead to significant economic losses or to risks to national security. Blockchain and other distributed ledger technologies (DLTs) guarantee the provenance and traceability of data by providing a transparent, immutable, and verifiable record of transactions while creating a peer-to-peer secure platform for storing and exchanging information. This overview aims to explore the potential of DLTs to combat digital deception, describing the most relevant applications and identifying their main open challenges. Moreover, some recommendations are enumerated to guide future researchers on issues that will have to be tackled to strengthen the resilience against cyber-threats on today's online media., This work was supported by the Xunta de Galicia (ED431G2019/01), in part by the Agencia Estatal de Investigacion of Spain (TEC2016-75067-C4-1-R, RED2018-102668-T, and in part by ERDF funds of the EU (AEI/FEDER, UE)., Xunta de Galicia; ED431G2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

TMA–FDA Range-Angle Beamforming With Periodic Linear-Phase Time-Modulating Waveforms

  • Maneiro-Catoira, Roberto
  • Brégains, Julio
  • García-Naya, José A.
  • Castedo, Luis
© 2022 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/LAWP.2022.3175107, [Abstract]: Frequency diverse arrays (FDAs) provide range-angle time-invariant transmit–receive beamforming, although a fine focus of their radiation patterns is costly since high-resolution mixers and phase shifters are required. An innovative approach to FDAs is proposed in which mixers and phase shifters are replaced by the application of periodic linear-phase time-modulating waveforms to the antenna excitations implemented with 2-bit variable phase shifters controlled with periodic on–off instants of binary sequences, which leads to a simple and precise method for FDA beam focusing., This work has been funded by the Xunta de Galicia (by grant ED431C 2020/15, and grant ED431G 2019/01 to support the Centro de Investigación de Galicia “CITIC”), the Agencia Estatal de Investigación of Spain (by grants RED2018-102668-T and PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia 2014-2020 & AEI/FEDER Programs, UE)., Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED431G 2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Intelligent Reflective Surfaces for Wireless Networks: An Overview of Applications, Approached Issues, and Open Problems

  • Pérez-Adán, Darian
  • Fresnedo, Óscar
  • González-Coma, José P.
  • Castedo, Luis
This article belongs to the Special Issue Reconfigurable Intelligent Surface (RIS) for Wireless Communications, [Abstract] An intelligent reflective surface (IRS) is a novel and revolutionizing communication technology destined to enable the control of the radio environment. An IRS is a real-time controllable reflectarray with a massive number of low-cost passive elements which introduce a phase shift to the incoming signals from the sources before the propagation towards the destination. This technology introduces the notion of a smart propagation environment with the aim of improving the system performance. In this paper, we provide a comprehensive literature overview on IRS technology, including its basic concepts and reconfiguration, as well as its design aspects and applications for wireless communication systems. We also study the performance metrics and the setups considered in recent publications related to IRS and provide suggestions of future research lines based on still unexplored use cases in the state-of-the-art., This work has been funded by the Xunta de Galicia (by grant ED431C 2020/15, and grant ED431G2019/01 to support the Centro de Investigación de Galicia “CITIC”), the Agencia Estatal de Investigación of Spain (by grants RED2018-102668-T and PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia 2014–2020 & AEI/FEDER Programs, UE), and the predoctoral grant BES-2017-081955, Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED431G2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Direct Antenna FSK Modulation with Time Modulated Arrays

  • Maneiro-Catoira, Roberto
  • Brégains, Julio
  • García-Naya, José A.
  • Castedo, Luis
This version of the paper has been accepted for publication. The final published paper is available online at: https://doi.org/10.1109/AP-S/USNC-URSI47032.2022.9886941 ., [Abstract]: An innovative time-modulated array (TMA) approach capable of simultaneously performing direct antenna frequency-shift keying (FSK) modulation and beam steering (BS) is proposed. Conventional binary FSK (BFSK) modulators are based on the commutation of two carriers and, to perform BS, a standard phased array with variable phase shifters (VPSs) is needed. Alternatively, the proposed TMA approach jointly performs BFSK modulation by transmitting each symbol over a different harmonic frequency, and BS by adjusting the on-off instants of the periodic binary sequences which control low-complexity 2-bit VPSs., This work has been funded by the Xunta de Galicia (by grant ED431C 2020/15, and grant ED431G 2019/01 to support the Centro de Investigación de Galicia “CITIC”), the Agencia Estatal de Investigación of Spain (by grants RED2018-102668-T and PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia 2014-2020 & AEI/FEDER Programs, UE)., Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED431G 2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Design and Experimental Validation of an Augmented Reality System With Wireless Integration for Context Aware Enhanced Show Experience in Auditoriums

  • Picallo, Imanol
  • Vidal-Balea, Aida
  • Blanco, Óscar
  • López Iturri, Peio
  • Fraga-Lamas, Paula
  • Klaina, Hicham
  • Fernández-Caramés, Tiago M.
  • Azpilicueta, Leyre
  • Falcone, Francisco
[Abstract] The development of multiple cultural and social related activities, such as shows related with the performing arts, conferences or presentations rely on facilities such as auditoriums, theatres and conference sites, which are progressively including multiple technological features in order to enhance user experience. There are still however situations in which user experience is limited owing to lack of environment adaption, such as people with disabilities. In this sense, the adoption of Context Aware paradigms within auditoriums can provide adequate functionalities in order to comply with specific needs. This work is aimed at demonstrating the feasibility in enhancing user experience (e.g., improving the autonomy of disabled people) within auditorium and theatre environments, by means of an Augmented Reality (AR) device (HoloLens smart glasses) with wireless system integration. To carry out the demonstration, different elements to build AR applications are described and tested. First, an intensive measurement campaign was performed in a real auditorium in the city of Pamplona (Baluarte Congress Center) in order to evaluate the feasibility of using Wi-Fi enabled AR devices in a complex wireless propagation scenario. The results show that these environments exhibit high levels of interference, owing to the co-existence and non-coordinated operation of multiple wireless communication systems, such as on site and temporary Wi-Fi access points, wireless microphones or communications systems used by performers, staff and users. Deterministic wireless channel estimation based in volumetric 3D Ray Launching have been obtained for the complete scenario volume, in order to assess quality of service metrics. For illustration purposes, a user-friendly application to help hearing impaired people was developed and its main features were tested in the auditorium. Such an application provides users with a 3D virtual space to visualize useful multimedia content like subtitles or additional information about the show, as well as an integrated call button., 10.13039/501100010801-Article Processing Charges (APC) from the Xunta de Galicia (Grant Number: ED431G 2019/01) 10.13039/501100011033-Agencia Estatal de Investigación of Spain (Grant Number: TEC2016-75067-C4-1-R, RED2018-102668-T and PID2019-104958RB-C42) 10.13039/501100008530-European Regional Development Fund (ERDF) of the European Union (EU) [Agencia Estatal de Investigación (AEI)/Fondo Europeo de Desarrollo Regional (FEDER), UE] 10.13039/100014440-Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE) (Grant Number: RTI2018-095499-B-C31), Xunta de Galicia; ED431G 2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Wideband User Grouping for Uplink Multiuser mmWave MIMO Systems With Hybrid Combining

  • Pérez-Adán, Darian
  • Fresnedo, Óscar
  • González-Coma, José P.
  • Castedo, Luis
[Abstract] Analog-digital hybrid precoding and combining schemes constitute an interesting approach to millimeter-wave (mmWave) multiple-input multiple-output (MIMO) systems due to the low hardware complexity and/or low power required for its deployment. However, the design of the hybrid precoders and combiners of a wideband multiuser (MU) mmWave MIMO system is challenging because the signal processing in the analog domain is constrained to be frequency flat. Furthermore, the number of radio frequency (RF) chains limits the number of individual streams that a common base station (BS) can simultaneously serve. This work jointly addresses the user scheduling, the user precoder design, and the BS hybrid combining design for the uplink of wideband MU mmWave MIMO systems. On the one hand, user precoding and BS hybrid combining are jointly designed to minimize the impact of having frequency-flat RF components. On the other hand, a number of users larger than the number of RF chains are served at the BS by employing a distributed quantizer linear coding (DQLC)-based non-orthogonal multiple access (NOMA) scheme. The use of this encoding strategy also allows exploiting the spatial correlation between the source information. Simulation results show remarkable performance gains of the proposed approaches for wideband mmWave MIMO hardware-constrained systems., 10.13039/501100010801-Xunta de Galicia (Grant Number: ED431C 2020/15) 10.13039/501100010801-Centro de Investigación de Galicia CITIC (Grant Number: ED431G2019/01) 10.13039/501100011033-Agencia Estatal de Investigación of Spain (Grant Number: RED2018-102668-T and PID2019-104958RB-C42) European Regional Development Funds (ERDF) of the EU (ERDF Galicia 2014-2020 & AEI/ERDF programs, UE) Predoctoral (Grant Number: BES-2017-081955), Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED431G2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Assessment of selective attention in children through Digital Teddy: preliminary study

  • González-Eiroa, Irene
  • Vázquez Araújo, Francisco Javier
  • Castro-Castro, Paula-María
  • Robles-García, Verónica
  • Dapena, Adriana
Comunicación presentada al V Congreso XoveTIC, organizado por el Centro de Investigación en TIC da Universidade da Coruña (CITIC), 5 y 6 de octubre de 2022, A Coruña., [Abstract]: Cancellation tests are adequate to detect selective attention in children. These tests are usually performed using paper and pencil, which considerably reduces the capacity to register important parameters and requires some motor skills. In this paper, we present a mobile application that replicates the original Teddy Bear Cancellation Test and adds new features so that therapists can carry out broader studies., This work was supported by the Agencia Estatal de Investigación (AEI), Gobierno de España, under Grants PID2020-118857RA-I00, PID2019-104958RB-C42, RED2018-102668-T and PID2019-104958RB-C42; Ministerio de Ciencia e Innovación, AEI and FEDER (PID2021- 126782OA-100); Xunta de Galicia (ED431C 2020/15 and ED431G 2019/01 to support the Centro de Investigación de Galicia “CITIC”) and ERDF funds of the EU (FEDER Galicia 2014-2020 & AEI/FEDER Programs, UE)., Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED431G 2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Capítulo o parte de un libro (BookPart)

Tactical Edge IoT in Defense and National Security

  • Fraga-Lamas, Paula
  • Fernández-Caramés, Tiago M.
This is the peer reviewed version of the following article: Fraga-Lamas, P. and Fernández-Caramés, T.M. (2022). Tactical Edge IoT in Defense and National Security. In IoT for Defense and National Security (eds R. Douglass, K. Gremban, A. Swami and S. Gerali), which has been published in final form at https://doi.org/10.1002/9781119892199.ch20. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. This article may not be enhanced, enriched or otherwise transformed into a derivative work, without express permission from Wiley or by statutory rights under applicable legislation. Copyright notices must not be removed, obscured or modified. The article must be linked to Wiley’s version of record on Wiley Online Library and any embedding, framing or otherwise making available the article or pages thereof by third parties from platforms, services and websites other than Wiley Online Library must be prohibited., [Abstract]: The deployment of internet of things (IoT) systems in Defense and National Security faces some limitations that can be addressed with Edge Computing approaches. The Edge Computing and IoT paradigms combined bring potential benefits, since they confront the limitations of traditional centralized cloud computing approaches, which enable easy scalability, real-time applications, or mobility support, but whose use poses certain risks in aspects like cybersecurity. This chapter identifies scenarios in which Defense and National Security can leverage commercial off-the-shelf (COTS) Edge IoT capabilities to deliver greater survivability to warfighters or first responders, while lowering costs and increasing operational efficiency and effectiveness. In addition, it presents the general design of a Tactical Edge IoT communications architecture, it identifies the open challenges for a widespread adoption and provides research guidelines and some recommendations for enabling cost-effective Edge IoT for Defense and National Security., This work has been funded by the Xunta de Galicia (by grant ED431C 2020/15, and grant ED431G 2019/01 to support the Centro de Investigación de Galicia \CITIC"), the Agencia Estatal de Investigación of Spain (by grants RED2018-102668-T, PID2020-118857RA-I00 and PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia 2014-2020 & AEI/FEDER Programs, UE)., Xunta de Galicia; ED431G 2019/01, Xunta de Galicia; ED431C 2020/15
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Developing the Next Generation of Augmented Reality Games for Pediatric Healthcare: An Open-Source Collaborative Framework Based on ARCore for Implementing Teaching, Training and Monitoring Applications

  • Vidal-Balea, Aida
  • Blanco, Óscar
  • Fraga-Lamas, Paula
  • Fernández-Caramés, Tiago M.
[Abstract] Augmented Reality (AR) provides an alternative to the traditional forms of interaction between humans and machines, and facilitates the access to certain technologies to groups of people with special needs like children. For instance, in pediatric healthcare, it is important to help children to feel comfortable during medical procedures and tests that may be performed on them. To tackle such an issue with the help of AR-based solutions, this article presents the design, implementation and evaluation of a novel open-source collaborative framework that enables to develop teaching, training, and monitoring pediatric healthcare applications. Specifically, such a framework allows for building collaborative applications and shared experiences for AR devices, providing functionalities for connecting with other AR devices and enabling real-time visualization and simultaneous interaction with virtual objects. Since all the communications involved in AR interactions are handled by AR devices, the proposed collaborative framework is able to operate autonomously through a Local Area Network (LAN), thus requiring no cloud or external servers. In order to demonstrate the potential of the proposed framework, a practical use case application is presented. Such an application has been designed to motivate pediatric patients and to encourage them to increase their physical activity through AR games. The presented games do not require any previous configuration, as they use ARCore automatic surface detection technology. Moreover, the AR mobile gaming framework allows multiple players to engage in the same AR experience, so children can interact and collaborate among them sharing the same AR content. In addition, the proposed AR system provides a remote web application that is able to collect and to visualize data on patient use, aiming to provide healthcare professionals with qualified data about the mobility and mood of their patients through an intuitive and user-friendly web tool. Finally, to determine the performance of the proposed AR system, this article presents its evaluation in terms of latency and processing time. The results show that both times are low enough to provide a good user experience., This work has been funded by the Xunta de Galicia (by grant ED431C 2020/15, and grant ED431G 2019/01 to support the Centro de Investigación de Galicia “CITIC”), the Agencia Estatal de Investigación of Spain (by grants RED2018-102668-T and PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia 2014-2020 & AEI/FEDER Programs, UE), Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED431G 2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Eye State Identification Based on Discrete Wavelet Transforms

  • Laport, Francisco
  • Castro-Castro, Paula-María
  • Dapena, Adriana
  • Vázquez Araújo, Francisco Javier
  • Fresnedo, Óscar
[Abstract]: We present a prototype to identify eye states from electroencephalography signals captured from one or two channels. The hardware is based on the integration of low-cost components, while the signal processing algorithms combine discrete wavelet transform and linear discriminant analysis. We consider different parameters: nine different wavelets and two features extraction strategies. A set of experiments performed in real scenarios allows to compare the performance in order to determine a configuration with high accuracy and short response delay., Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED431G2019/01, Xunta de Galicia; ED481A-2018/156, This work has been funded by the Xunta de Galicia (by grant ED431C 2020/15 and grant ED431G2019/01 to support the Centro de Investigación de Galicia “CITIC”), the Agencia Estatal de Investigación of Spain (by grants RED2018-102668-T and PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia & AEI/FEDER, UE); and the predoctoral Grant No. ED481A-2018/156 (Francisco Laport).
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Dual-Beam Steerable TMAs Combining AM and PM Switched Time-Modulation

  • Maneiro-Catoira, Roberto
  • Brégains, Julio
  • García-Naya, José A.
  • Castedo, Luis
[Abstract] Wireless sensor networks (WSN) are increasingly requiring directional antennas that not only provide higher capacity, security, transmission range or robustness against interference, but also contribute with smart antenna capabilities such as adaptive beamforming or multi beam radiation patterns. Standard phased arrays provide these features, but employing feeding networks based on digitally controlled variable phase shifters (VPSs) which have the disadvantage of high cost and limited angular resolution. Instead, time-modulated arrays (TMAs) use switched feeding networks governed by digital periodic sequences which allow harmonic patterns to be radiated and endows (TMAs) with attractive multifunctional capabilities. In this paper, we analyze and properly combine (TMA) switched feeding networks capable of time-modulating an antenna array with discretized amplitude modulation (AM) and phase modulation (PM) waveforms. The advantages of the proposed innovative dual-beam (TMA) with respect to the competing architectures are, on the one hand, its power efficiency and beamsteering (BS) phase sensitivity and, on the other, its hardware simplicity, which allows for an excellent relative cost advantage., This research has been funded by the Xunta de Galicia (by grant ED431C 2020/15, and grant ED431G 2019/01 to support the Centro de Investigación de Galicia “CITIC”), the Agencia Estatal de Investigación of Spain (by grants RED2018-102668-T and PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia 2014–2020 & AEI/FEDER Programs, UE, Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED431G 2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Green IoT and Edge AI as Key Technological Enablers for a Sustainable Digital Transition towards a Smart Circular Economy: An Industry 5.0 Use Case

  • Fraga-Lamas, Paula
  • Lopes, Sérgio Ivan
  • Fernández-Caramés, Tiago M.
[Abstract] Internet of Things (IoT) can help to pave the way to the circular economy and to a more sustainable world by enabling the digitalization of many operations and processes, such as water distribution, preventive maintenance, or smart manufacturing. Paradoxically, IoT technologies and paradigms such as edge computing, although they have a huge potential for the digital transition towards sustainability, they are not yet contributing to the sustainable development of the IoT sector itself. In fact, such a sector has a significant carbon footprint due to the use of scarce raw materials and its energy consumption in manufacturing, operating, and recycling processes. To tackle these issues, the Green IoT (G-IoT) paradigm has emerged as a research area to reduce such carbon footprint; however, its sustainable vision collides directly with the advent of Edge Artificial Intelligence (Edge AI), which imposes the consumption of additional energy. This article deals with this problem by exploring the different aspects that impact the design and development of Edge-AI G-IoT systems. Moreover, it presents a practical Industry 5.0 use case that illustrates the different concepts analyzed throughout the article. Specifically, the proposed scenario consists in an Industry 5.0 smart workshop that looks for improving operator safety and operation tracking. Such an application case makes use of a mist computing architecture composed of AI-enabled IoT nodes. After describing the application case, it is evaluated its energy consumption and it is analyzed the impact on the carbon footprint that it may have on different countries. Overall, this article provides guidelines that will help future developers to face the challenges that will arise when creating the next generation of Edge-AI G-IoT systems., This work has been supported through funds ED431G 2019/01 provided by Centro de Investigación de Galicia “CITIC” for a three-month research stay in Instituto Técnico de Viana do Castelo between 15 June and 15 September 2021. This work has also been funded by the Xunta de Galicia (by grant ED431C 2020/15), the Agencia Estatal de Investigación of Spain (by grants RED2018-102668-T and PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia 2014–2020 & AEI/FEDER Programs, UE), Xunta de Galicia; ED431G 2019/01, Xunta de Galicia; ED431C 2020/15
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Towards Post-Quantum Blockchain: A Review on Blockchain Cryptography Resistant to Quantum Computing Attacks

  • Fernández-Caramés, Tiago M.
  • Fraga-Lamas, Paula
[Abstract] Blockchain and other Distributed Ledger Technologies (DLTs) have evolved significantly in the last years and their use has been suggested for numerous applications due to their ability to provide transparency, redundancy and accountability. In the case of blockchain, such characteristics are provided through public-key cryptography and hash functions. However, the fast progress of quantum computing has opened the possibility of performing attacks based on Grover's and Shor's algorithms in the near future. Such algorithms threaten both public-key cryptography and hash functions, forcing to redesign blockchains to make use of cryptosystems that withstand quantum attacks, thus creating which are known as post-quantum, quantum-proof, quantum-safe or quantum-resistant cryptosystems. For such a purpose, this article first studies current state of the art on post-quantum cryptosystems and how they can be applied to blockchains and DLTs. Moreover, the most relevant post-quantum blockchain systems are studied, as well as their main challenges. Furthermore, extensive comparisons are provided on the characteristics and performance of the most promising post-quantum public-key encryption and digital signature schemes for blockchains. Thus, this article seeks to provide a broad view and useful guidelines on post-quantum blockchain security to future blockchain researchers and developers., 10.13039/501100010801-Xunta de Galicia (Grant Number: ED431G2019/01) 10.13039/501100011033-Agencia Estatal de Investigación (Grant Number: TEC2016-75067-C4-1-R and RED2018-102668-T) 10.13039/501100008530-European Regional Development Fund, Xunta de Galicia; ED431G2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Proposals and Comparisons from One-Sensor EEG and EOG Human-Machine Interfaces

  • Laport, Francisco
  • Iglesia, Daniel I.
  • Dapena, Adriana
  • Castro-Castro, Paula-María
  • Vázquez Araújo, Francisco Javier
[Abstract] Human-Machine Interfaces (HMI) allow users to interact with different devices such as computers or home elements. A key part in HMI is the design of simple non-invasive interfaces to capture the signals associated with the user’s intentions. In this work, we have designed two different approaches based on Electroencephalography (EEG) and Electrooculography (EOG). For both cases, signal acquisition is performed using only one electrode, which makes placement more comfortable compared to multi-channel systems. We have also developed a Graphical User Interface (GUI) that presents objects to the user using two paradigms—one-by-one objects or rows-columns of objects. Both interfaces and paradigms have been compared for several users considering interactions with home elements., Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED431G2019/01, Agencia Estatal de Investigación de España; RED2018-102668-T, Agencia Estatal de Investigación de España; PID2019-104958RB-C42, Xunta de Galicia; ED481A-2018/156, This work has been funded by the Xunta de Galicia (by grant ED431C 2020/15, and grant ED431G2019/01 to support the Centro de Investigación de Galicia “CITIC”), the Agencia Estatal de Investigación of Spain (by grants RED2018-102668-T and PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia & AEI/FEDER, UE); and the predoctoral Grant No. ED481A-2018/156 (Francisco Laport)
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Combining Switched TMAs and FDAs to Synthesize Dot-Shaped Beampatterns

  • Maneiro-Catoira, Roberto
  • Brégains, Julio
  • García-Naya, José A.
  • Castedo, Luis
This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/LAWP.2021.3094936., [Abstract]: The application of frequency offsets to the elements of a conventional phased array with variable phase shifters (VPSs) leads to frequency diverse arrays (FDAs) with the ability to provide range-angle spatial focusing. In this letter, we propose an innovative approach to FDA using switched time-modulated arrays (TMAs) instead of VPSs. The time modulation efficiency of the combined FDA-TMA approach is over 94% when using Kaiser windows to determine the frequency offsets. Such windows have the advantage of flexibly handling the tradeoff between the beam collection efficiency and the half power beamwidth without the need of difficult optimizations., This work has been funded by the Xunta de Galicia (by grant ED431C 2020/15, and grant ED431G 2019/01 to support the Centro de Investigación de Galicia “CITIC”), the Agencia Estatal de Investigación of Spain (by grants RED2018-102668-T and PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia 2014-2020 & AEI/FEDER Programs, UE)., Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED431G 2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Rank Constrained Precoding for the Downlink of mmWave Massive MIMO Hybrid Systems

  • González-Coma, José P.
  • Fresnedo, Óscar
  • Castedo, Luis
[Abstract] The hybrid design of precoding schemes for millimeter-wave communications allows exploiting the gains by using large antenna array with an affordable hardware cost and power consumption. In this work, we present a novel design strategy based on limiting the rank of the fully digital solutions before their decomposition into the analog and digital baseband components. This rank constraint on the digital formulation leads to a joint precoding and scheduling scheme where the number of allocated streams is limited according to the hardware constraints. In this way, the proposed approach can significantly reduce the performance losses caused by the direct decomposition of the unconstrained digital precoders. The resulting rank-constrained problems for the considered scenario are not convex and difficult to sort out. However, we propose several algorithms to compute the rank-constrained digital solutions with the help of the uplink-downlink duality for the achievable sum-rate. The obtained results show that this strategy achieves considerably higher sum-rates regardless of the channel conditions or available hardware resources., 10.13039/501100010801-Xunta de Galicia (Grant Number: ED431C 2020/15 and ED431G2019/01) Centro de Investigación de Galicia “CITIC” 10.13039/501100011033-Agencia Estatal de Investigación of Spain (Grant Number: RED2018-102668-T and PID2019-104958RB-C42) 10.13039/501100008530-European Regional Development Fund (ERDF) of the EU (FEDER Galicia 2014-2020 & AEI/FEDER Programs, UE), Xunta de Galicia; ED431G 2019/01, Xunta de Galicia; ED431C 2020/15
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Time-Modulated Arrays With Haar Wavelets

  • Maneiro-Catoira, Roberto
  • Brégains, Julio
  • García-Naya, José A.
  • Castedo, Luis
© 2020 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/LAWP.2020.2986832, [Abstract]. Time-modulated arrays (TMAs) can effectively perform beamsteering over the first positive harmonic pattern by applying progressively delayed versions of stair-step approximations of a sine waveform to the antenna excitations. In this letter, we consider synthesizing such stair-step sine approximations by means of Haar wavelets. Haar functions constitute a complete orthonormal set of rectangular waveforms, which have the ability to represent a given function with a high degree of accuracy using few constituent terms. Hence, when they are applied to the TMA synthesis, employing single-pole double-throw switches, such a feature leads to an excellent rejection level of the undesired harmonics as well as a bandwidth greater than that supported by conventional TMAs with on-off switches., This work has been funded by the Xunta de Galicia (ED431G2019/01), the Agencia Estatal de Investigación of Spain (TEC2016-75067-C4-1-R, RED2018-102668-T) and ERDF funds of the EU (AEI/FEDER, UE)., Xunta de Galicia; ED431G2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

JSCC-Cast: A Joint Source Channel Coding Video Encoding and Transmission System with Limited Digital Metadata

  • Balsa, José
  • Fresnedo, Óscar
  • García-Naya, José A.
  • Domínguez-Bolaño, Tomás
  • Castedo, Luis
[Abstract] This work considers the design and practical implementation of JSCC-Cast, a comprehensive analog video encoding and transmission system requiring a reduced amount of digital metadata. Suitable applications for JSCC-Cast are multicast transmissions over time-varying channels and Internet of Things wireless connectivity of end devices having severe constraints on their computational capabilities. The proposed system exhibits a similar image quality compared to existing analog and hybrid encoding alternatives such as Softcast. Its design is based on the use of linear transforms that exploit the spatial and temporal redundancy and the analog encoding of the transformed coefficients with different protection levels depending on their relevance. JSCC-Cast is compared to Softcast, which is considered the benchmark for analog and hybrid video coding, and with an all-digital H.265-based encoder. The results show that, depending on the scenario and considering image quality metrics such as the structural similarity index measure, the peak signal-to-noise ratio, and the perceived quality of the video, JSCC-Cast exhibits a performance close to that of Softcast but with less metadata and not requiring a feedback channel in order to track channel variations. Moreover, in some circumstances, the JSCC-Cast obtains a perceived quality for the frames comparable to those displayed by the digital one., This work has been funded by the Xunta de Galicia (by grant ED431C 2020/15 and grant ED431G 2019/01 to support the Centro de Investigación de Galicia “CITIC”), the Agencia Estatal de Investigación of Spain (by grants RED2018-102668-T and PID2019-104958RB-C42), and ERDF funds of the EU (FEDER Galicia 2014–2020 and AEI/FEDER Programs, UE), Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED431G 2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Time-Modulated Arrays Controlled With Sinusoidal Pulsewidth Modulation

  • Maneiro-Catoira, Roberto
  • Brégains, Julio
  • García-Naya, José A.
  • Castedo, Luis
This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The Version of Record is available online at: https://doi.org/10.1109/LAWP.2020.3000463., [Abstract]: In this letter, sinusoidal pulsewidth modulation (PWM) is applied to the design of time-modulated arrays (TMAs). The array excitations are modulated using PWM-synthesized sine waveforms. This provides increased signal bandwidth, excellent rejection of the undesired harmonics, and modulation efficiencies aligned with the best ones in the literature. The simplicity of the technique allows for an easily implementable antenna array feeding network., This work has been funded by the Xunta de Galicia (ED431G2019/01), the Agencia Estatal de Investigación of Spain (TEC2016-75067-C4-1-R, RED2018-102668-T, PID2019-104958RB-C42) and ERDF funds of the EU (AEI/FEDER, UE)., Xunta de Galicia; ED431G2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Multibeam Single-Sideband Time-Modulated Arrays

  • Maneiro-Catoira, Roberto
  • García-Naya, José A.
  • Brégains, Julio
  • Castedo, Luis
[Abstract]: The design of efficient time-modulated arrays (TMAs) for multi-beam steering purposes must be based on both a type of periodical sequences that guarantees an adequate windowing of exploited harmonics, and a feeding network capable of providing low hardware insertion losses. Compliance with these two requirements is not simple and is aggravated by the fact that, as the number of exploited harmonic beams increases, not only drastically decreases the antenna efficiency, but also the beam steering flexibility. In this work, we propose three different single sideband (SSB) feeding networks for multibeam TMAs constructed considering different combinations of single-pole multiple-throw (SPMT) basic modules. The proposed feeding networks simultaneously accomplish excellent levels of modulation efficiency, reasonable hardware insertion losses, and beam scanning flexibility. In addition, a comparison with standard phased arrays in terms of performance, phase sensitivity, complexity, and cost-effectiveness is carried out., This work was supported in part by the Xunta de Galicia under Grant ED431G2019/01; in part by the Agencia Estatal de Investigación of Spain under Grant TEC2016-75067-C4-1-R, Grant RED2018-102668-T, and Grant PID2019-104958RB-C42; and in part by European Regional Development Fund (ERDF) Funds of the European Union (EU) (FEDER Galicia and Agencia Estatal de Investigación (AEI)/FEDER, EU)., Xunta de Galicia; ED431G2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

PICTOTEMPO: An App for Personal Organization in Autism Spectrum Disorders

  • Vila Muñoz, Noé
  • Castro-Castro, Paula-María
  • Fresnedo, Óscar
Presented at the 4th XoveTIC Conference, A Coruña, Spain, 7–8 October 2021., [Abstract] In this work, we develop a mobile application which allows to create digital schedules for children with autism spectrum disorder. These schedules comprise a sorted sequence of tasks or activities which facilitates children to understand and anticipate the upcoming events, thus reducing their stress and frustration. For that, the activities are identified and described with the help of visual supports (pictograms) which can be visualized on the screen of any mobile device. The developed application also allows to gather valuable information about the performance and interests of the children from their interactions with it, helping to refine and define more appropriate routines or support therapies for the children. In this way, the aim of this work is to contribute to improve the lives of people with functional and cognitive diversity, especially children with these disorders, and also their families., This work has been funded by the Xunta de Galicia (by grant ED431C 2020/15, and grant ED431G 2019/01 to support the Centro de Investigación de Galicia “CITIC”), the Agencia Estatal de Investigación of Spain (by grants RED2018-102668-T and PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia 2014-2020 & AEI/FEDER Programs, UE), Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED431G 2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

An IoT and Blockchain Based System for Monitoring and Tracking Real-Time Occupancy for COVID-19 Public Safety

  • Fernández-Caramés, Tiago M.
  • Froiz-Míguez, Iván
  • Fraga-Lamas, Paula
The conference was held online, 15-30 November 2020., [Abstract]: The COVID-19 pandemic has brought several limitations regarding physical distancing in order to reduce the interactions among large groups that could have prolonged close contact. For health reasons, such physical distancing requirements should be guaranteed in private and public spaces. In Spain, occupancy is restricted by law but, in practice, certain spaces may become overcrowded, existing law infringements in places that rely on occupancy estimations that are not accurate enough. For instance, although the number of passengers who enter a public transportation service is known, it is difficult to determine the actual occupancy of such a vehicle, since it is commonly unknown when and where passengers descend. Despite a number of counting systems existing, they are either prone to counting errors in overcrowded scenarios or require the active involvement of the people to be counted (e.g., going through a lathe or tapping a card when entering or exiting a monitored area) or of a person who manages the entering/exit process. This paper presents a novel IoT occupancy system that allows estimating in real time the people occupancy level of public spaces such as buildings, classrooms, businesses or moving transportation vehicles. The proposed system is based on autonomous wireless devices that, after powering them on, do not need active actions from the passengers/users and require a minimum amount of infrastructure. The system does not collect any personal information to ensure user privacy and includes a decentralized traceability subsystem based on blockchain, which guarantees the availability, security and immutability of the collected information. Such data will be shared among smart city stakeholders to ensure public safety and then deliver transparent decision-making based on data-driven analysis and planning., This work was funded by the Xunta de Galicia (by grant ED431C 2020/15, as well as grant ED431G 2019/01 to support the Centro de Investigación de Galicia “CITIC”), the Agencia Estatal de Investigación of Spain (by grants TEC2016-75067-C4-1-R, RED2018-102668-T and PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia 2014-2020 and AEI/FEDER Programs, UE)., Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED431G 2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Using the Power Delay Profile to Accelerate the Training of Neural Network-Based Classifiers for the Identification of LOS and NLOS UWB Propagation Conditions

  • Barral Vales, Valentín
  • Domínguez-Bolaño, Tomás
  • Escudero, Carlos J.
  • García-Naya, José A.
[Abstract]: Ultra-wideband (UWB) technology enables centimeter-level localization systems based on the accurate estimation of the actual distance between transmitter and receiver, by means of the precise estimation of the signal time-of-flight. However, this is only possible when correctly detecting the first path of the incoming signal instead of a bounce or a reflection, which becomes challenging in non line-of-sight (NLOS) situations. There are many different approaches in the literature to alleviate the wrong detection of the first incoming UWB signal path. One of them considers machine learning techniques to design classifiers capable of distinguishing between line-of-sight (LOS) and NLOS propagation from available signal features. However, the performance and complexity of the obtained classifiers depend largely on the size of the input data associated to such features. Thus, features such as the channel impulse response (CIR) produce large amounts of data, yielding very complex classifiers. In this paper, we propose using a downsampled power delay profile (PDP) as an alternative feature consisting of input data much smaller than the CIR, although sufficiently representative, hence resulting in a lower computational cost while exhibiting a similar classification performance. Furthermore, another of the tasks addressed in this work is the study of the impact on the classification results of using a dataset for training where the samples of each class are not balanced from the point of view of energy. Finally, this work also studies how the classifiers based on the CIR or the PDP improve their performance when considering additional signal features such as the estimated range value or its energy level., This work was supported in part by the Xunta de Galicia under Grant ED431C 2020/15 and Grant ED431G2019/01 to support the Centro de Investigación de Galicia, Centro de Investigación en Tecnologías de la Información y las Comunicaciones (CITIC), in part by the Agencia Estatal de Investigación of Spain under Grant RED2018-102668-T and Grant PID2019-104958RB-C42, and in part by the European Regional Development Fund of the EU under Grant FEDER Galicia 2014-2020 & AEI/FEDER Programs, UE., Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED431G2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Analysis, Design and Practical Validation of an Augmented Reality Teaching System Based on Microsoft HoloLens 2 and Edge Computing

  • Vidal-Balea, Aida
  • Blanco, Óscar
  • Picallo, Imanol
  • Celaya-Echarri, Mikel
  • Fraga-Lamas, Paula
  • López Iturri, Peio
  • Azpilicueta, Leyre
  • Falcone, Francisco
  • Fernández-Caramés, Tiago M.
[Absctract]: In recent years, the education sector has incorporated the use of new technologies and computing devices into classrooms, which allowed for implementing new ways for enhancing teaching and learning. One of these new technologies is augmented reality (AR), which enables creating experiences that mix reality and virtual elements in an attractive and visual way, thus helping teachers to foster student interest in learning certain subjects and abstract concepts in novel visual ways. This paper proposes to harness the potential of the latest AR devices in order to enable giving AR-enabled lectures and hands-on labs. Specifically, it proposes an architecture for providing low-latency AR education services in a classroom or a laboratory. Such a low latency is achieved thanks to the use of edge computing devices, which offload the cloud from the traditional tasks that are required by dynamic AR applications (e.g., near real-time data processing, communications among AR devices). Depending on the specific AR application and the number of users, the wireless link (usually WiFi) could be overloaded if the network has not been properly designed, and the overall performance of the application can be compromised, leading to high latency and even to wireless communication failure. In order to tackle this issue, radio channel measurements and simulation results have been performed by means of an in-house developed 3D ray-launching tool, which is able to model and simulate the behaviour of an AR-enabled classroom/laboratory in terms of radio propagation and quality of service. To corroborate the obtained theoretical results, a Microsoft HoloLens 2 teaching application was devised and tested, thus demonstrating the feasibility of the proposed approach., This work has been funded by the Xunta de Galicia (by grant ED431C 2020/15, and grant ED431G 2019/01 to support the Centro de Investigación de Galicia “CITIC”), the Agencia Estatal de Investigación of Spain (by grants TEC2016-75067-C4-1-R, RED2018-102668-T and PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia 2014-2020 and AEI/FEDER Programs, UE)., Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED431G 2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Building Decentralized Fog Computing-Based Smart Parking Systems: From Deterministic Propagation Modeling to Practical Deployment

  • Celaya-Echarri, Mikel
  • Froiz-Míguez, Iván
  • Azpilicueta, Leyre
  • Fraga-Lamas, Paula
  • López Iturri, Peio
  • Falcone, Francisco
  • Fernández-Caramés, Tiago M.
[Abstract] The traditional process of finding a vacant parking slot is often inefficient: it increases driving time, traffic congestion, fuel consumption and exhaust emissions. To address such problems, smart parking systems have been proposed to help drivers to find available parking slots faster using latest sensing and communications technologies. However, the deployment of the communications infrastructure of a smart parking is not straightforward due to multiple factors that may affect wireless propagation. Moreover, a smart parking system needs to provide not only accurate information on available spots, but also fast responses while guaranteeing the system availability even in the case of lacking connectivity. This article describes the development of a decentralized low-latency smart parking system: from its conception, design and theoretical simulation, to its empirical validation. Thus, this work first characterizes a real-world scenario and proposes a fog computing and Internet of Things (IoT) based communications architecture to provide smart parking services. Next, a thorough analysis on the wireless channel properties is carried out by means of an in-house developed deterministic 3D-Ray Launching (3D-RL) tool. The obtained results are validated through a real-world measurement campaign and then the communications architecture is implemented by using ZigBee sensor nodes. The implemented architecture also makes use of Bluetooth Low Energy beacons, an Android app, a decentralized database and fog computing gateways, whose performance is evaluated in terms of response latency and processing rate. Results show that the proposed system is able to deliver information to the drivers fast, with no need for relying on remote servers. As a consequence, the presented development methodology and communications evaluation tool can be useful for future smart parking developers, which can determine the optimal locations of the wireless transceivers during the simulation stage and then deploy a system that can provide fast responses and decentralized services., Xunta de Galicia; ED431G2019/01, Agencia Estatal de Investigación of Spain; TEC2016-75067-C4-1-R, Agencia Estatal de Investigación of Spain; RED2018-102668-T, Agencia Estatal de Investigación of Spain; PID2019-104958RB-C42, Ministerio de Ciencia, Innovación y Universidades; RTI2018-095499-B-C31
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Service-Learning Projects in University Degrees Based on Sustainable Development Goals: Proposals and Results

  • Castro-Castro, Paula-María
  • Ares-Pernas, Ana
  • Dapena, Adriana
[Abstract] We present several Service-Learning projects developed considering Sustainable Development Goals to provide the students skills for the support of a sustainable society. This project begins with collecting initial impressions from surveys and reflections to know both the students’ expectations and their degree of involvement in the development of a sustainable society. Next, the students design academic projects taking into account the needs of the specific collective to which the Service-Learning activity is oriented. When this design has finished, such projects are developed with the users and the activity is evaluated. During 2019–2020, these projects were done with four entities oriented to people either with Asperger’s syndrome, Down syndrome, Alzheimer’s disease or mental health illnesses. A total of 35 and 10 students, respectively, from the Bachelor’s Degree of Engineering in Industrial Design and Product Development and from the Master’s Degree in Professorship of High School have participated in this experience. We analyze the results from the perspective of the different agents involved, considering both qualitative and quantitative metrics. The results show that both users and staff are satisfied with this collaboration between the university and their entities. Moreover, this experience clearly has contributed to a better personal and professional student’s development., This work has been funded by the Xunta de Galicia-FEDER (ED431C 2020/15 and ED431G2019/01 to support the Centro de Investigación de Galicia “CITIC”), the Agencia Estatal de Investigación of Spain (TEC2016-75067-C4-1-R, RED2018-102668-T, PID2019-104958RB-C42), and ERDF funds of the EU (AEI/FEDER, UE), Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED431G2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

From Pre-Quantum to Post-Quantum IoT Security: A Survey on Quantum-Resistant Cryptosystems for the Internet of Things

  • Fernández-Caramés, Tiago M.
© 2020 IEEE. This version of the article has been accepted for publication, after peer review. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., [Absctract]: Although quantum computing is still in its nascent age, its evolution threatens the most popular public-key encryption systems. Such systems are essential for today's Internet security due to their ability for solving the key distribution problem and for providing high security in insecure communications channels that allow for accessing websites or for exchanging e-mails, financial transactions, digitally signed documents, military communications or medical data. Cryptosystems like Rivest-Shamir-Adleman (RSA), elliptic curve cryptography (ECC) or Diffie-Hellman have spread worldwide and are part of diverse key Internet standards like Transport Layer Security (TLS), which are used both by traditional computers and Internet of Things (IoT) devices. It is especially difficult to provide high security to IoT devices, mainly because many of them rely on batteries and are resource constrained in terms of computational power and memory, which implies that specific energy-efficient and lightweight algorithms need to be designed and implemented for them. These restrictions become relevant challenges when implementing cryptosystems that involve intensive mathematical operations and demand substantial computational resources, which are often required in applications where data privacy has to be preserved for the long term, like IoT applications for defense, mission-critical scenarios or smart healthcare. Quantum computing threatens such a long-term IoT device security and researchers are currently developing solutions to mitigate such a threat. This article provides a survey on what can be called post-quantum IoT systems (IoT systems protected from the currently known quantum computing attacks): the main post-quantum cryptosystems and initiatives are reviewed, the most relevant IoT architectures and challenges are analyzed, and the expected future trends are indicated. Thus, this article is aimed at providing a wide view of post-quantum IoT security and give useful guidelines..., This work was supported in part by the Xunta de Galicia under Grant ED431G2019/01, in part by the Agencia Estatal de Investigación of Spain under Grant TEC2016-75067-C4- 1-R and Grant RED2018-102668-T, and in part by ERDF funds of the EU (AEI/FEDER, UE)., Xunta de Galicia; ED431G2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Design, Implementation, and Empirical Validation of an IoT Smart Irrigation System for Fog Computing Applications Based on LoRa and LoRaWAN Sensor Nodes

  • Froiz-Míguez, Iván
  • López Iturri, Peio
  • Fraga-Lamas, Paula
  • Celaya-Echarri, Mikel
  • Blanco, Óscar
  • Azpilicueta, Leyre
  • Falcone, Francisco
  • Fernández-Caramés, Tiago M.
[Absctract]: Climate change is driving new solutions to manage water more efficiently. Such solutions involve the development of smart irrigation systems where Internet of Things (IoT) nodes are deployed throughout large areas. In addition, in the mentioned areas, wireless communications can be difficult due to the presence of obstacles and metallic objects that block electromagnetic wave propagation totally or partially. This article details the development of a smart irrigation system able to cover large urban areas thanks to the use of Low-Power Wide-Area Network (LPWAN) sensor nodes based on LoRa and LoRaWAN. IoT nodes collect soil temperature/moisture and air temperature data, and control water supply autonomously, either by making use of fog computing gateways or by relying on remote commands sent from a cloud. Since the selection of IoT node and gateway locations is essential to have good connectivity and to reduce energy consumption, this article uses an in-house 3D-ray launching radio-planning tool to determine the best locations in real scenarios. Specifically, this paper provides details on the modeling of a university campus, which includes elements like buildings, roads, green areas, or vehicles. In such a scenario, simulations and empirical measurements were performed for two different testbeds: a LoRaWAN testbed that operates at 868 MHz and a testbed based on LoRa with 433 MHz transceivers. All the measurements agree with the simulation results, showing the impact of shadowing effects and material features (e.g., permittivity, conductivity) in the electromagnetic propagation of near-ground and underground LoRaWAN communications. Higher RF power levels are observed for 433 MHz due to the higher transmitted power level and the lower radio propagation losses, and even in the worst gateway location, the received power level is higher than the sensitivity threshold (−148 dBm). Regarding water consumption, the provided estimations indicate that the proposed smart irrigation system is able to reduce roughly 23% of the amount of used water just by considering weather forecasts. The obtained results provide useful guidelines for future smart irrigation developers and show the radio planning tool accuracy, which allows for optimizing the sensor network topology and the overall performance of the network in terms of coverage, cost, and energy consumption., This work has been funded by the Xunta de Galicia (by Grant No. ED431C 2020/15, and Grant No. ED431G 2019/01 to support the Centro de Investigación de Galicia “CITIC”), the Agencia Estatal de Investigación of Spain (by grants RTI2018-095499-B-C31, TEC2016-75067-C4-1-R, RED2018-102668-T, and PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia 2014-2020 and AEI/FEDER Programs, UE)., Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED431G 2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Numerical Model of a 28-GHz Frequency Diverse Array Antenna

  • Angoue Avele, Marc Bernice
  • Brégains, Julio
  • Maneiro-Catoira, Roberto
  • García-Naya, José A.
  • Castedo, Luis
[Abstract] In this work we make use of the frequency diverse array (FDA) concept, whose design is based upon a frequency increment across the antenna elements to generate a beam steering that is a function of angle, time and range. For a possible use of this technique in 5G detection systems, a 28-GHz FDA numerical model, designed with help of a software tool, is analyzed. Some practical conclusions are drawn from the presented results., This research received This work has been funded by the Xunta de Galicia (ED431G2019/01), the Agencia Estatal de Investigación of Spain (TEC2016-75067-C4-1-R, RED2018-102668-T, PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia & AEI/FEDER, UE), Xunta de Galicia; ED431G2019/01
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Stochastic geometry analysis and design of wireless powered MTC networks

  • Liesegang Maria, Sergi
  • Muñoz Medina, Olga
  • Pascual Iserte, Antonio
©2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Machine-type-communications (MTC) are being crucial in the development of next generation mobile networks. Given that MTC devices are usually battery constrained, wireless power transfer (WPT) and energy harvesting (EH) have emerged as feasible options to enlarge the lifetime of the devices, leading to wireless powered networks. In that sense, we consider a setup where groups of sensors are served by a base station (BS), which is responsible for the WPT. Additionally, EH is used to collect energy from the wireless signals transmitted by other sensors. To characterize the energy obtained from both procedures, we model the sporadic activity of sensors as Bernoulli random variables and their positions with repulsive Matérn cluster processes. This way, the random activity and spatial distribution of sensors are introduced in the analysis of the energy statistics. This analysis can be useful for system design aspects such as energy allocation schemes or optimization of idle-active periods, among others. As an example of use of the developed analysis, we include the design of a WPT scheme under a proportional fair policy., The work presented in this paper was carried out within the framework of the project 5G&B RUNNER-UPC (TEC2016-77148-C2-1-R (AEI/FEDER, UE)), the research network RED2018-102668-T Red COMONSENS and the FPI grant BES-2017-079994, funded by the Spanish Ministry of Science, Innovation and Universities; and the grant 2017 SGR 578, funded by the Catalan Government (AGAUR, Secretaria d’Universitats i Recerca, Departament d’Empresa i Coneixement, Generalitat de Catalunya)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Higher-order link prediction via learnable maximum mean discrepancy

  • Karanikolas, Georgios V.
  • Pagès Zamora, Alba Maria
  • Giannakis, Georgios B.
Higher-order link prediction (HOLP) seeks missing links capturing dependencies among three or more network nodes. Predicting high-order links (HOLs) can for instance reveal hyperlinks in the structure of drug substance and metabolic networks. Existing methods either make restrictive assumptions regarding the emergence of HOLs, or, they rely on reduced dimensionality models of limited expressiveness. To overcome these limitations, the HOLP approach developed here leverages distribution similarities across embeddings as captured by a learnable probability metric. The intuition underpinning the novel approach is that sets of nodes whose embeddings are less similar in distribution, are less likely to be connected by a HOL. Specifically, nonlinear dimensionality reduction is effected through a Gaussian process latent variable model that yields nodal embeddings, and also learns a data-driven similarity function (kernel). This kernel forms the core of a maximum mean discrepancy probability metric. Tests on benchmark datasets illustrate the potential of the proposed approach., This work was supported in part by NSF grants 1901134, 2126052, 2212318, 2220292. A. Pages-Zamora was supported by grants PID 2019-104958RB-C41 and RED2018-102668-T funded by MCIN/AEI/10.13039/501100011033; and by 2021 SGR 01033 funded by Dept. de Recerca i Univ. de la Generalitat de Catalunya 10.13039/501100002809., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Energy-efficient analog beamforming with short packets in millimeter-wave MIMO systems

  • Borràs Pino, Jordi
  • Molina Oliveras, Francesc
  • López Valcarce, Roberto
  • Sala Álvarez, José
The energy-aware design of fully analog precoders and combiners is investigated in this paper. To that aim, we consider a millimeter-wave short-packet communication scenario where power consumption and hardware complexity constitute relevant factors. User terminals employ a single channel encoder and, at hardware level, they implement analog architectures that combine phase shifters and switches. Additionally, transmitting terminals also leverage a power control system. An energy efficiency figure of merit is considered, and its optimization subject to finite packet-length constraints is tackled cyclically over disconnected feasible sets. Numerical results are reported firstly, to illustrate the advantages of the proposed short-packet fully analog design, secondly, to compare its performance to that of on-off beamforming, and finally, to discuss the optimality of proposed optimization algorithm., J. Borras, F. Molina and J. Sala-Álvarez are supported in part by Agencia Estatal de Investigación (AEI, Spain) and by European Regional Development Fund (ERDF) under projects WINTER (TEC2016-76409-C2-1-R) and RODIN (PID2019-105717RB-C22), and in part by the Catalan Government (AGAUR) through Grant 2017 SGR 578. J. Borras is also supported by Fellowship FPI BES-2017-080071 (Spanish Government and ERDF). F. Molina is also supported by Fellowship 2019FI_B1 00085 (Catalan Government, AGAUR). R. López-Valcarce is supported in part by AEI (Spain) and by ERDF under projects WINTER (TEC2016-76409-C2-2-R) and RODIN (PID2019- 105717RB-C21), and in part by Xunta de Galicia (Agrupación Estratéxica Consolidada de Galicia accreditation 2016-2019). All authors are also supported by the AEI and ERDF through the research network COMONSENS Network (RED2018-102668-T)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Unsupervised ensemble learning for genome sequencing

  • Pagès Zamora, Alba Maria
  • Ochoa Álvarez, Idoia
  • Ruiz Cavero, Gonzalo
  • Villalvilla Ornat, Pol
Unsupervised ensemble learning refers to methods devised for a particular task that combine data provided by decision learners taking into account their reliability, which is usually inferred from the data. Here, the variant calling step of the next generation sequencing technologies is formulated as an unsupervised ensemble classification problem. A variant calling algorithm based on the expectation-maximization algorithm is further proposed that estimates the maximum-a-posteriori decision among a number of classes larger than the number of different labels provided by the learners. Experimental results with real human DNA sequencing data show that the proposed algorithm is competitive compared to state-of-the-art variant callers as GATK, HTSLIB, and Platypus., This work has been funded by the Agencia Estatal de Investigación, Ministerio de Ciencia, Innovación y Universidades of the Spanish Government and ERDF funds (PID2019-104958RB-C41, RED2018-102668-T); and by Gipuzkoa Fellows grant and Ramon y Cajal grant., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Perfect and quasi-perfect codes for the Bosonic classical-quantum channel

  • Blasco Coll, Andreu
  • Rodríguez Fonollosa, Javier
We explore perfect and quasi-perfect codes for the Bosonic channel, where information is generated by a laser and conveyed in the form of coherent states. In particular, we consider the phase-modulation codebook for coherent states in a Bosonic channel. We show that these phase-modulation codes are quasi-perfect as long as the cardinality of the code is the same as the dimension of the coherent states. These codes feature the smallest error probability among all codes of the same cardinality and the same dimension of the channel Hilbert space. We study the performance of these codes in terms of error probability, incorporating the degradation caused by a depolarizing or an erasure quantum channel., This work was supported in part by the MCIN/AEI/ 10.13039/501100011033 under Grant PID2019-104958RB-C41 and Grant RED2018-102668-T, in part by the Departament de Recerca i Universitats de la Generalitat de Catalunya 10.13039/501100002809 under Grant 2017 SGR 578 and Grant QuantumCAT 001-P-001644, and in part by the European Regional Development Funds (ERDF) ., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Random-Walk laplacian for frequency analysis in periodic graphs

  • Boukrab, Rachid
  • Pagès Zamora, Alba Maria
This paper presents the benefits of using the random-walk normalized Laplacian matrix as a graph-shift operator and defines the frequencies of a graph by the eigenvalues of this matrix. A criterion to order these frequencies is proposed based on the Euclidean distance between a graph signal and its shifted version with the transition matrix as shift operator. Further, the frequencies of a periodic graph built through the repeated concatenation of a basic graph are studied. We show that when a graph is replicated, the graph frequency domain is interpolated by an upsampling factor equal to the number of replicas of the basic graph, similarly to the effect of zero-padding in digital signal processing., This work has been funded by the Agencia Estatal de Investigación, Ministerio de Ciencia, Innovación y Universidades of the Spanish Government and ERDF funds (PID2019-104958RB-C41, RED2018-102668-T); and by the Catalan Government-Secretaria d'Universitats i Recerca, Departament d'Empresa i Coneixement, Generalitat de Catalunya, AGAUR (2020 FI_B 00495, 2017 SGR 578)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Polar coding for confidential broadcasting

  • Olmo Alòs, Jaume del
  • Rodríguez Fonollosa, Javier
A polar coding scheme is proposed for the Wiretap Broadcast Channel with two legitimate receivers and one eavesdropper. We consider a model in which the transmitter wishes to send the same private (non-confidential) message and the same confidential message reliably to two different legitimate receivers, and the confidential message must also be (strongly) secured from the eavesdropper. The coding scheme aims to use the optimal rate of randomness and does not make any assumption regarding the symmetry or degradedness of the channel. This paper extends previous work on polar codes for the wiretap channel by proposing a new chaining construction that allows to reliably and securely send the same confidential message to two different receivers. This construction introduces new dependencies between the random variables involved in the coding scheme that need to be considered in the secrecy analysis., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Polar coding for the wiretap broadcast channel with multiple messages

  • Olmo Alòs, Jaume del
  • Rodríguez Fonollosa, Javier
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., A polar coding scheme is proposed for the Wiretap Broadcast Channel with two legitimate receivers and one eaves-dropper. We consider a model in which the transmitter wishes to to reliably send different confidential and private messages to the different legitimate receivers, and the confidential message must also be (strongly) secured from the eavesdropper. There are two different inner-bounds on the achievable region of this model in the literature. Both are characterized by using Marton's coding and the only difference between them is the decoding strategy: one is characterized by using joint decoding, while the other uses successive decoding. In this paper we present a polar coding scheme that achieves the larger inner-bound, and we show that polar-based joint decoding is crucial for this purpose., This work has been funded by the AEI of Ministerio de Ciencia, Innovación y Universidades of Spain, TEC2016-75067-C4-2-R, RED2018-102668-T with ESF and PID2019-104958RB-C41 and Dept. d’Empresa i Coneixement de la Generalitat de Catalunya, 2017 SGR 578 AGAUR and 001-P-001644 QuantumCAT with ERDF., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Quantum multiple hypothesis testing based on a sequential discarding scheme

  • Pérez Guijarro, Jordi
  • Pagès Zamora, Alba Maria
  • Rodríguez Fonollosa, Javier
We consider the quantum multiple hypothesis testing problem, focusing on the case of hypothesis represented by pure states. A sequential adaptive algorithm is derived and analyzed first. This strategy exhibits a decay rate in the error probability with respect to the expected value of measurements greater than the optimal decay rate of the fixed-length methods. A more elaborated scheme is developed next, by serially concatenating multiple implementations of the first scheme. In this case each stage considers as a priori hypothesis probability the a posteriori probability of the previous stage. We show that, by means of a fixed number of concatenations, the expected value of measurements to be performed decreases considerably. We also analyze one strategy based on an asymptotically large concatenation of the initial scheme, demonstrating that the expected number of measurements in this case is upper bounded by a constant, even in the case of zero average error probability. A lower bound for the expected number of measurements in the zero error probability setting is also derived., This work was supported in part by the Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación, of the Spanish Government, under Grant RED2018-102668-T and Grant PID2019-104958RB-C41; in part by the Catalan Government under Grant 2017 SGR 578 AGAUR; and in part by the QuantumCAT within the European Regional Development Fund (ERDF) Program of Catalunya under Grant 001-P-001644., Postprint (published version)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Building decentralized fog computing-based smart parking systems: from deterministic propagation modeling to practical deployment

  • Celaya Echarri, Mikel
  • Froiz Míguez, Iván
  • Azpilicueta Fernández de las Heras, Leyre
  • Iturri López, Peio
  • Falcone Lanas, Francisco
The traditional process of finding a vacant parking slot is often inefficient: it increases driving time, traffic congestion, fuel consumption and exhaust emissions. To address such problems, smart parking systems have been proposed to help drivers to find available parking slots faster using latest sensing and communications technologies. However, the deployment of the communications infrastructure of a smart parking is not straightforward due to multiple factors that may affect wireless propagation. Moreover, a smart parking system needs to provide not only accurate information on available spots, but also fast responses while guaranteeing the system availability even in the case of lacking connectivity. This article describes the development of a decentralized low-latency smart parking system: from its conception, design and theoretical simulation, to its empirical validation. Thus, this work first characterizes a real-world scenario and proposes a fog computing and Internet of Things (IoT) based communications architecture to provide smart parking services. Next, a thorough analysis on the wireless channel properties is carried out by means of an in-house developed deterministic 3D-Ray Launching (3D-RL) tool. The obtained results are validated through a real-world measurement campaign and then the communications architecture is implemented by using ZigBee sensor nodes. The implemented architecture also makes use of Bluetooth Low Energy beacons, an Android app, a decentralized database and fog computing gateways, whose performance is evaluated in terms of response latency and processing rate. Results show that the proposed system is able to deliver information to the drivers fast, with no need for relying on remote servers. As a consequence, the presented development methodology and communications evaluation tool can be useful for future smart parking developers, which can determine the optimal locations of the wireless transceivers during the simulation stage and then deploy a system that can provide fast responses and decentralized services., This work was supported in part by the School of Engineering and Sciences, Tecnológico de Monterrey, in part by the Xunta de Galicia under Grant ED431G2019/01, in part by the Agencia Estatal de Investigación of Spain under Grant TEC2016-75067-C4-1-R, Grant RED2018-102668-T, and Grant PID2019-104958RB-C42, in part by the European Regional Development Fund (ERDF) funds of the European Union (EU) (AEI/FEDER, UE), and in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCI-U/AEI/FEDER,UE) under Grant RTI2018-095499-B-C31.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Design and experimental validation of an augmented reality system with wireless integration for context aware enhanced show experience in auditoriums

  • Picallo Guembe, Imanol
  • Vidal Balea, A.
  • Blanco Novoa, Óscar
  • Iturri López, Peio
  • Fraga Lamas, Paula
  • Azpilicueta Fernández de las Heras, Leyre
  • Falcone Lanas, Francisco
  • Fernández Caramés, Tiago M.
  • Klaina, Hicham
The development of multiple cultural and social related activities, such as shows related with the performing arts, conferences or presentations rely on facilities such as auditoriums, theatres and conference sites, which are progressively including multiple technological features in order to enhance user experience. There are still however situations in which user experience is limited owing to lack of environment adaption, such as people with disabilities. In this sense, the adoption of Context Aware paradigms within auditoriums can provide adequate functionalities in order to comply with specific needs. This work is aimed at demonstrating the feasibility in enhancing user experience (e.g., improving the autonomy of disabled people) within auditorium and theatre environments, by means of an Augmented Reality (AR) device (HoloLens smart glasses) with wireless system integration. To carry out the demonstration, different elements to build AR applications are described and tested. First, an intensive measurement campaign was performed in a real auditorium in the city of Pamplona (Baluarte Congress Center) in order to evaluate the feasibility of using Wi-Fi enabled AR devices in a complex wireless propagation scenario. The results show that these environments exhibit high levels of interference, owing to the co-existence and non-coordinated operation of multiple wireless communication systems, such as on site and temporary Wi-Fi access points, wireless microphones or communications systems used by performers, staff and users. Deterministic wireless channel estimation based in volumetric 3D Ray Launching have been obtained for the complete scenario volume, in order to assess quality of service metrics. For illustration purposes, a user-friendly application to help hearing impaired people was developed and its main features were tested in the auditorium. Such an application provides users with a 3D virtual space to visualize useful multimedia content like subtitles or additional information about the show, as well as an integrated call button. © 2013 IEEE., This work was supported in part by the Article Processing Charges (APC) from the Xunta de Galicia under Grant ED431G 2019/01; in part by the Agencia Estatal de Investigación of Spain under Grant TEC2016-75067-C4-1-R, Grant RED2018-102668-T, and Grant PID2019-104958RB-C42; in part by the European Regional Development Fund (ERDF) of the European Union (EU) [Agencia Estatal de Investigación (AEI)/Fondo Europeo de Desarrollo Regional (FEDER), UE]; and in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE) under Project RTI2018-095499-B-C31.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Tackling the biological meaning of the human olfactory bulb dyshomeostatic proteome across neurological disorders: an integrative bioinformatic approach

  • Cartas Cejudo, Paz
  • Lachén Montes, Mercedes
  • Fernández Irigoyen, Joaquín
  • Santamaría Martínez, Enrique
Olfactory dysfunction is considered an early prodromal marker of many neurodegenerative diseases. Neuropathological changes and aberrant protein aggregates occur in the olfactory bulb (OB), triggering a tangled cascade of molecular events that is not completely understood across neurological disorders. This study aims to analyze commonalities and differences in the olfactory protein homeostasis across neurological backgrounds with different spectrums of smell dysfunction. For that, an integrative analysis was performed using OB proteomics datasets derived from subjects with Alzheimer’s disease (AD), Parkinson´s disease (PD), mixed dementia (mixD), dementia with Lewy bodies (DLB), frontotemporal lobar degeneration (FTLD-TDP43), progressive supranuclear palsy (PSP) and amyotrophic lateral sclerosis (ALS) with respect to OB proteome data from neurologically intact controls. A total of 80% of the differential expressed protein products were potentially disease-specific whereas the remaining 20% were commonly altered across two, three or four neurological phenotypes. A multi-level bioinformatic characterization revealed a subset of potential disease-specific transcription factors responsible for the downstream effects detected at the proteome level as well as specific densely connected protein complexes targeted by several neurological phenotypes. Interestingly, common or unique pathways and biofunctions were also identified, providing novel mechanistic clues about each neurological disease at olfactory level. The analysis of olfactory epithelium, olfactory tract and primary olfactory cortical proteotypes in a multi-disease format will functionally complement the OB dyshomeostasis, increasing our knowledge about the neurodegenerative process across the olfactory axis., This work was funded by grants from the Spanish Ministry of Science, Innovation and Universities (Ref. PID2019-110356RB-I00/ AEI / 10.13039/501100011033 to JF-I and ES) and the Department of Economic and Business Development of the Government of Navarra (Ref. 0011-14112020-000028 to ES).The Proteomics Platform of Navarrabiomed, member of Proteored (PRB3ISCIII), was supported by grant PT17/0019/009, of the PE I+D+I 2013-2016 funded by ISCIII and FEDER to JF. The Clinical Neuroproteomics Unit of Navarrabiomed is member of the Spanish Olfactory Network (ROE) (supported by grant RED2018-102662-T funded by Spanish Ministry of Science and Innovation) and the Global Consortium for Chemosensory Research (GCCR).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Design, implementation, and empirical validation of an IoT smart irrigation system for fog computing applications based on Lora and Lorawan sensor nodes

  • Froiz Míguez, Iván
  • Iturri López, Peio
  • Fraga Lamas, Paula
  • Celaya Echarri, Mikel
  • Blanco Novoa, Óscar
  • Azpilicueta Fernández de las Heras, Leyre
  • Falcone Lanas, Francisco
  • Fernández Caramés, Tiago M.
Climate change is driving new solutions to manage water more efficiently. Such solutions involve the development of smart irrigation systems where Internet of Things (IoT) nodes are deployed throughout large areas. In addition, in the mentioned areas, wireless communications can be difficult due to the presence of obstacles and metallic objects that block electromagnetic wave propagation totally or partially. This article details the development of a smart irrigation system able to cover large urban areas thanks to the use of Low-Power Wide-Area Network (LPWAN) sensor nodes based on LoRa and LoRaWAN. IoT nodes collect soil temperature/moisture and air temperature data, and control water supply autonomously, either by making use of fog computing gateways or by relying on remote commands sent from a cloud. Since the selection of IoT node and gateway locations is essential to have good connectivity and to reduce energy consumption, this article uses an in-house 3D-ray launching radio-planning tool to determine the best locations in real scenarios. Specifically, this paper provides details on the modeling of a university campus, which includes elements like buildings, roads, green areas, or vehicles. In such a scenario, simulations and empirical measurements were performed for two different testbeds: a LoRaWAN testbed that operates at 868 MHz and a testbed based on LoRa with 433 MHz transceivers. All the measurements agree with the simulation results, showing the impact of shadowing effects and material features (e.g., permittivity, conductivity) in the electromagnetic propagation of near-ground and underground LoRaWAN communications. Higher RF power levels are observed for 433 MHz due to the higher transmitted power level and the lower radio propagation losses, and even in the worst gateway location, the received power level is higher than the sensitivity threshold (–148 dBm). Regarding water consumption, the provided estimations indicate that the proposed smart irrigation system is able to reduce roughly 23% of the amount of used water just by considering weather forecasts. The obtained results provide useful guidelines for future smart irrigation developers and show the radio planning tool accuracy, which allows for optimizing the sensor network topology and the overall performance of the network in terms of coverage, cost, and energy consumption., This work has been funded by the Xunta de Galicia (by Grant No. ED431C 2020/15, and Grant No. ED431G 2019/01 to support the Centro de Investigación de Galicia 'CITIC'), the Agencia Estatal de Investigación of Spain (by grants RTI2018-095499-B-C31, TEC2016-75067-C4-1-R, RED2018-102668-T, and PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia 2014-2020 and AEI/FEDER Programs, UE).