Pasar al contenido principal

DYNAMIC ACOUSTIC NETWORKS FOR CHANGING ENVIRONMENTS

RTI2018-098085-B-C41

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

FIWARE based low-cost wireless acoustic sensor network for monitoring and classification of urban soundscape

  • Arce Vila, Pau|||0000-0001-5726-9228
  • Piñero, Gema|||0000-0002-8719-8106
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • Salvo, David
[EN] This work presents a wireless acoustic sensor network (WASN) that monitors urban environments by recognizing a given set of sound events or classes. The nodes of the WASN are Raspberry Pi devices that not only record the ambient sound, but also detect and recognize different sound events. All the signal processing tasks, from the recording to the classification carried out by a convolutional neural network (CNN), are run on Raspberry Pi devices. Due to the low cost of the proposed acoustic nodes, the system exhibits a very high potential scalability. Regarding the underlying WASN, it has been designed according to the open standard FIWARE, thus the whole system can be deployed without the need of proprietary software. Regarding the performance of the sound classifier, the proposed WASN achieves similar accuracy compared to other WASNs that make use of cloud computing. However, the proposed WASN significantly minimizes the network traffic since it does not exchange audio signals, but only contextual information in form of labels. On the other hand, most of the time the class reported by the WASN nodes is the "background'' soundscape, which usually contains no event of interest. This is the case when monitoring the soundscape of big avenues, where four events have been identified: "traffic'', "siren'', "horn'' and "noisy vehicles'', being the "traffic'' class associated to the background soundscape. In this paper, the use of a simple pre-detection stage prior to the CNN classification is proposed, with the aim of saving computation and power consumption at the nodes. The pre-detection stage is able to differentiate the other three relevant sounds from the "traffic'' and activates the classifier only when some of these three events is likely occurring. The proposed pre-detection stage has been validated through data recorded in the city of Valencia (Spain), achieving a reduction of the Raspberry Pi CPU's usage by a factor of six., This work has been partially supported by European Commission (EC) through GA 774477 -MAtchUP, EC together with Spanish Government through RTI2018-098085-B-C41 (MINECO/FEDER) and Generalitat Valenciana through PROMETEO/2019/109. Authors would like to thank Daniel Sanz Montrull for aid in data collection.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improved Aures tonality metric for complex sounds

  • Estreder-Campos, Juan|||0000-0001-9728-4422
  • Piñero, Gema|||0000-0002-8719-8106
  • de Diego Antón, María|||0000-0001-9948-3396
  • Ramo, Jussi
  • Välimäki, Vesa
[EN] This paper proposes improvements to the Aures' tonality metric, which can be used for estimating the frequency masking of complex sounds. The perception of tonality has been extensively studied in simple sounds, such as pure tones and narrowband noise signals, but there are no solid conclusions in the case of complex sounds. Previously, Aures' method has been mostly used in the psychoacoustic analysis of noise signals. The modifications presented here are a better spectral resolution, a lowered tonal threshold, and a different exponent in one of their weighting functions. These may appear to be minor changes from the original Aures (OA) method, but they have proven to be significant for perception. The improved Aures (IA) method has been validated by a subjective test using three different multitone signals in the presence of a narrowband noise, whose result is the subjectively perceived masking thresholds. Results show that the IA method presents an average error of 0.8 dB when predicting the subjective masking thresholds provided by the test, while the average errors of the OA and a baseline spectral flatness method exceed 5 dB. In addition, a second subjective test has been carried out to assess the perceptual equalization of a music signal using the proposed IA and spectral flatness methods. The second test confirms that the IA method is preferred. Therefore, the improved Aures method is proposed as a reliable tonality metric for complex sounds, such as multi-tone signals and music., This work has been partially supported by the GVA Regional Government through PROMETEO/2019/109, the Spanish Government through BES-2016-077899 and RED2018-102668-T, and the European Union together with the Spanish Government through RTI2018-098085-BC41 (MCIU/AEI/FEDER) . This research is also part of the activities of the "Nordic Sound and Music Computing Network" (NordicSMC), NordForsk project No. 86892. Juan Estreder's work has been carried out partly during his research stay at the Acoustics Lab of Aalto University.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-complexity soft ML detection for generalized spatial modulation

  • Simarro, M. Angeles|||0000-0001-6238-2532
  • García Mollá, Víctor Manuel|||0000-0003-4768-7367
  • Martínez Zaldívar, Francisco José|||0000-0002-7845-6273
  • Gonzalez, Alberto|||0000-0002-6984-3212
[EN] Generalized Spatial Modulation (GSM) is a recent Multiple-Input Multiple-Output (MIMO) scheme, which achieves high spectral and energy efficiencies. Specifically, soft-output detectors have a key role in achiev-ing the highest coding gain when an error-correcting code (ECC) is used. Nowadays, soft-output Maxi-mum Likelihood (ML) detection in MIMO-GSM systems leads to a computational complexity that is un-feasible for real applications; however, it is important to develop low-complexity decoding algorithms that provide a reasonable computational simulation time in order to make a performance benchmark available in MIMO-GSM systems. This paper presents three algorithms that achieve ML performance. In the first algorithm, different strategies are implemented, such as a preprocessing sorting step in order to avoid an exhaustive search. In addition, clipping of the extrinsic log-likelihood ratios (LLRs) can be incor-porating to this algorithm to give a lower cost version. The other two proposed algorithms can only be used with clipping and the results show a significant saving in computational cost. Furthermore clipping allows a wide-trade-off between performance and complexity by only adjusting the clipping parameter., Acknowledgements This work has been partially supported by Spanish Ministry of Science, Innovation and Universities and by European Union through grant RTI2018-098085-BC41 (MCUI/AEI/FEDER) , by GVA
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of stability of distributed FxLMS active noise control systems

  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • García Mollá, Víctor Manuel|||0000-0003-4768-7367
  • Vidal Maciá, Antonio Manuel
  • de Diego Antón, María|||0000-0001-9948-3396
  • Gonzalez, Alberto|||0000-0002-6984-3212
[EN] This paper addresses the assessment of the stability of distributed active noise control (ANC) systems, which are designed to cancel acoustic noise at given points in space. These systems distribute the control task across several simple acoustic nodes that generate the control signals by filtering a noise reference signal. The coefficients of each node filter are iteratively calculated by the filtered-X LMS algorithm. The nodes remain stable when the adaptive filters computed in each node converge to finite values. However, the acoustic coupling among nodes can cause instability (i.e., divergence). Collaboration among nodes is required to avoid this phenomenon. It is shown that the properties of the system are summarized in a system matrix and that the system remains stable when the real parts of all of the eigenvalues of this system matrix are positive. However, computation of all of the eigenvalues is computationally expensive. In this paper, we propose a fast method for checking the positiveness of the real parts of the system matrix eigenvalues. It is shown that the proposed method is faster than the direct calculation of eigenvalues and it assesses the stability/instability of the ANC systems without any false stability outcomes and more accurately than existing alternatives., This work has been partially supported by RTI2018-098085-BC41 and PID2021-125736OB-I00 (MCIN/AEI/10.13039/501100011033/, ERDF A way of making Europe) and GVA through PROMETEO/2019/109.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selection of the convergence step of the Fx-LMS algorithm

  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • de Diego Antón, María|||0000-0001-9948-3396
  • García Mollá, Víctor Manuel|||0000-0003-4768-7367
  • Gonzalez, Alberto|||0000-0002-6984-3212
[EN] The choice of a suitable convergence step that allows the fast convergence of the filtered-x LMS algorithm in practical scenarios is usually carried out by trial and error, since the theoretical developments provide only indicative values. The particularity of the filtered-x structure, which adds a delay between the output of the adaptive filter and the error signal and colors the reference signal, increases the inaccuracy of the theoretical models. Furthermore, the use of band-limited reference signals is beyond the scope of most theoretical studies, which focus on the cases of full-band reference signals, making it difficult to extrapolate these models to band-limited signals. In this paper, we propose a low-cost and meaningful method for selecting the convergence step that is well tuned in most practical cases. It can be used regardless of the type of the reference signal, the system delays, and the nature of the filter required in the filtered-x structure. Numerical simulations are performed to validate the effectiveness of the proposed approach., This work has been partially supported by RTI2018-098085-BC41 and PID2021-125736OB-I00 (MCIN/AEI/10.13039/501100011033/, "ERDF A way of making Europe") and GVA through PROMETEO/2019/109.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Parallel border tracking in binary images for multicore computers

  • García Mollá, Víctor Manuel|||0000-0003-4768-7367
  • Alonso-Jordá, Pedro|||0000-0002-6882-6592
[EN] Border tracking in binary images is an important operation in many computer vision applications. The problem consists in finding borders in a 2D binary image (where all of the pixels are either 0 or 1). There are several algorithms available for this problem, but most of them are sequential. In a former paper, a parallel border tracking algorithm was proposed. This algorithm was designed to run in Graphics Processing units, and it was based on the sequential algorithm known as the Suzuki algorithm. In this paper, we adapt the previously proposed GPU algorithm so that it can be executed in multicore computers. The resulting algorithm is evaluated against its GPU counterpart. The results show that the performance of the GPU algorithm worsens (or even fails) for very large images or images with many borders. On the other hand, the proposed multicore algorithm can efficiently cope with large images., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work has been partially supported by the Spanish Ministry of Science, Innovation, and Universities, jointly with the European Union, through Grants RTI2018-098085-BC41, PID2021-125736OB-I00 and PID2020-113656RB-C22 (MCIN/AEI/10.13039/501100011033/, "ERDF A way of making Europe"). Also, the GVA has partially supported this research through project PROMETEO/2019/109.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis de maestría (MasterThesis)

Clasificador de sonidos urbanos mediante redes neuronales en dispositivos de bajo coste

  • Salvo Gutiérrez, David
[ES] En este TFM se presenta un clasificador de sonidos urbanos con una CNN empleando dispositivos de bajo coste. Se emplea una red neuronal CNN para clasificar los eventos, y se implementa el modelo en un dispositivo de bajo coste como es el caso de la Raspberry Pi. En este proyecto se ha realizado todo el conjunto de tareas desde la implementación del clasificador en la Raspberry Pi hasta la comunicación y visualización de los resultados en una aplicación web en forma de Dashboard., [EN] In this TFM a classifier of urban sounds with a CNN is presented using low-cost devices. A CNN neural network is used to classify the events, and the model is implemented in a low-cost device such as the Raspberry Pi. In this project, the entire set of tasks has been carried out from the implementation of the classifier on the Raspberry Pi to the communication and visualization of the results in a web application in the form of Dashboard.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automatic QoE evaluation for asymmetric encoding of 3D videos for DASH streaming service

  • Guzmán-Castillo, Paola Fernanda|||0000-0002-1887-8562
  • Arce Vila, Pau|||0000-0001-5726-9228
  • Guerri Cebollada, Juan Carlos|||0000-0002-5807-1923
[EN] The paper is based on the study of the performance of a Dynamic Adaptive Streaming over HTTP (DASH) system in the context of 3D video streaming, using different scenarios and network conditions, specifically with bandwidth variations. The objective is the development of a framework for the evaluation of QoE in 3D adaptive video streaming scenarios, which allows to analyze the impact on the user's Quality of Experience (QoE) using different bandwidth variation patterns (switching frequency, range and type of variation), among other aspects. A set of subjective tests will be carried out, with the aim of identifying the correlation between the quality of the user experience and the frequency, type, range and temporal location of the bandwidth switching events. The proposed framework allows performance measurements to be carried out in an automated and systematic way for the evaluation of DASH systems in 2D and 3D video streaming service. We have used Puppeteer, the Node.js library developed by Google, which provides a high-level API, to automate actions on Chrome Devtools Protocol, such as starting playback, causing bandwidth changes and saving the results of quality change processes, timestamps, stalls and so on. From this data, a processing is made to allow the reconstruction of the visualized video, as well as the extraction of quality metrics and the users' QoE assessment using the ITU-T P.1203 recommendation., This work has been partially supported by Spanish Ministry of Science, Innovation and Universities and by European Union through grant RTI2018-098085-BC41 (MCUI/AEI/FEDER), SSENCE project (Telefonica Chair UPV), PROMETEO/2019/109 (Generalitat Valenciana) and UPV Line I + D + i "Technologies for distribution and processing of multimedia information and QoE".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the performance of a GPU-based SoC in a distributed spatial audio system

  • Belloch, José A.
  • Badía, José M.
  • Larios, Diego F.
  • Personal, Enrique
  • Lupoiu, Mihaita
  • León, Carlos
  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • Fuster Criado, Laura|||0000-0003-2633-0449
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • Vidal Maciá, Antonio Manuel
  • Quintana-Ortí, Enrique S.|||0000-0002-5454-165X
[EN] Many current system-on-chip (SoC) devices are composed of low-power multicore processors combined with a small graphics accelerator (or GPU) offering a trade-off between computational capacity and low-power consumption. In this context, spatial audio methods such as wave field synthesis (WFS) can benefit from a distributed system composed of several SoCs that collaborate to tackle the high computational cost of rendering virtual sound sources. This paper aims at evaluating important aspects dealing with a distributed WFS implementation that runs over a network of Jetson Nano boards composed of embedded GPU-based SoCs: computational performance, energy efficiency, and synchronization issues. Our results show that the maximum efficiency is obtained when the WFS system operates the GPU frequency at 691.2 MHz, achieving 11 sources-per-Watt. Synchronization experiments using the NTP protocol show that the maximum initial delay of 10 ms between nodes does not prevent us from achieving high spatial sound quality., This work has been supported by the Spanish Government through TIN2017-82972-R, ESP2015-68245-C4-1-P, the Valencian Regional Government through PROMETEO/2019/109 and the Universitat Jaume I through UJI-B2019-36.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Weighted pressure matching with windowed targets for personal sound zones

  • Molés-Cases, Vicent
  • Elliott, Stephen J.
  • Cheer, Jordan
  • Piñero, Gema|||0000-0002-8719-8106
  • Gonzalez, Alberto|||0000-0002-6984-3212
[EN] Personal sound zones (PSZ) systems use an array of loudspeakers to render independent audio signals to multiple listeners within a room. The performance of a PSZ system, designed using weighted pressure matching, depends on the selected target responses for the bright zone. In reverberant environments, the target responses are generally chosen to be the room impulse responses from one of the loudspeakers to the control points in the selected bright zone. This approach synthesizes the direct propagation component and all the reverberant components in the bright zone, while minimizing the energy in the dark zone. We present a theoretical analysis to show that high energy differences cannot be achieved for the diffuse reverberant components in the bright and dark zones, and so trying to synthesize these components in the bright zone does not lead to the best performance. It is then shown that the performance can be improved by using windowed versions of these measured impulse responses as target signals, in order to control which reverberant components are synthesized in the bright zone and which are not. This observation is supported by experimental measurements in two scenarios with different levels of reverberation., Vicent Moles-Cases was supported by the Spanish Ministry of Education through Grant No. FPU17/01288. Stephen J. Elliott was supported by the EPSRC DigiTwin project (EP/R006768/1). Jordan Cheer was supported by the Intelligent Structures for Low Noise Environments (ISLNE) EPSRC Prosperity Partnership (EP/S03661X/1). This research was supported by the Spanish Ministry of Science, Innovation and Universities through Grant No. RTI2018-098085-B-C41 (MCIU/AEI/FEDER, UE). Open access was funded by Universitat Politecnica de Valencia through Grant No. PAID-12-21.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Maximum likelihood low-complexity GSM detection for large MIMO systems

  • García Mollá, Víctor Manuel|||0000-0003-4768-7367
  • Martínez Zaldívar, Francisco José|||0000-0002-7845-6273
  • Simarro, M. Angeles|||0000-0001-6238-2532
  • Gonzalez, Alberto|||0000-0002-6984-3212
[EN] Hard-Output Maximum Likelihood (ML) detection for Generalized Spatial Modulation (GSM) systems involves obtaining the ML solution of a number of different MIMO subproblems, with as many possible antenna configurations as subproblems. Obtaining the ML solution of all of the subproblems has a large computational complexity, especially for large GSM MIMO systems. In this paper, we present two techniques for reducing the computational complexity of GSM ML detection. The first technique is based on computing a box optimization bound for each subproblem. This, together with sequential processing of the subproblems, allows fast discarding of many of these subproblems. The second technique is to use a Sphere Detector that is based on box optimization for the solution of the subproblems. This Sphere Detector reduces the number of partial solutions explored in each subproblem. The experiments show that these techniques are very effective in reducing the computational complexity in large MIMO setups., This work has been partially supported by Spanish Ministry of Science, Innovation and Universities and by European Union through grant RTI2018-098085-BC41 (MCUI/AEI/FEDER), by GVA through PROMETEO/2019/109 and by Catedra Telefonica-UPV through SSENCE project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Remote Microphone Technique for Active Noise Control Over Distributed Networks

  • Antoñanzas, Christian
  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • de Diego Antón, María|||0000-0001-9948-3396
  • Gonzalez, Alberto|||0000-0002-6984-3212
[EN] Multichannel Active Noise Control (ANC) headrest systems have usually been designed with the objective of creating quiet areas at the passenger positions within the cabin of a public transport. Due to the high computational demands of dealing with multiple loudspeakers and multiple microphones by using a single centralized processor, and the convenience of a scalable system, a distributed implementation may be advisable. On the other hand, the addition of the remote microphone (RM) technique to the ANC headrest systems has recently allowed the creation of local zones of quiet at unachievable placements for the error sensors. This technique allows the quiet zone to be shifted to a desired location away from the physical sensor. However, to our knowledge, the implementation of an ANC headrest system with virtual microphones over a distributed acoustic sensor network has not been addressed. In this work, a distributed version of the multiple-error FxLMS (MEFxLMS) algorithm considering the RM method (RM-DMEFxLMS) is proposed by using an alternative formulation of the RM method. Through a set of simulations, it is found that on a non-constrained communication network, the proposed algorithm presents the same performance of its centralized version and provides a scalable and more versatile ANC system., This work was supported in part by MCIN/AEI/10.13039/501100011033/, ERDF A way of making Europe under Grants RTI2018-098085-BC41 and PID2021-125736OB-I00, and in part by GVA through PROMETEO/2019/109. The associate editor coordinating the review of this manuscript and approving it for publication was Dr. Romain Serizel.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Providing Spatial Control in Personal Sound Zones Using Graph Signal Processing

  • Molés-Cases, Vicent
  • Piñero, Gema|||0000-0002-8719-8106
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • de Diego Antón, María|||0000-0001-9948-3396
[EN] Personal audio systems aim to create listening (or bright) and quiet (or dark) zones in a room using an array of loudspeakers. For this purpose, many algorithms have been presented in the literature, being Weighted Pressure Matching (wPM) one of the most versatile. The main strength of wPM is that it can render a target soundfield in the listening zone while having control over the mean acoustic potential energy in the quiet zone. In this paper, we propose a variation of wPM such that it can provide control not only over the mean energy, but also over the spatial energy differences, obtaining a more uniform soundfield in the dark zone. The new algorithm is called wPM with Total Variation (wPM-TV), where TV is a tool used in the field of Graph Signal Processing (GSP). Firstly, we propose a graph representation of the control microphones of the dark zone and secondly, we use the wPM-TV algorithm to provide spatial control over that zone. Simulations show the good performance of the proposed algorithm and its versatility to obtain a more uniform distribution of the acoustic potential energy in the dark zone at the cost of slightly increasing the mean square reproduction error in the bright zone., This work has been partially supported by Spanish Ministry of Science, Innovation and Universities through grant FPU17/01288 and by European Union together with Spanish Government through grant RTI2018-098085-BC41 (MCIU/AEI/FEDER)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Low Complexity Near-ML Sphere Decoding based on a MMSE ordering for Generalized Spatial Modulation

  • Simarro, M. Angeles|||0000-0001-6238-2532
  • García Mollá, Víctor Manuel|||0000-0003-4768-7367
  • Martínez Zaldívar, Francisco José|||0000-0002-7845-6273
  • Gonzalez, Alberto|||0000-0002-6984-3212
[EN] Generalized Spatial Modulation (GSM) is a trans-mission technique used in wireless communications in which only part of the transmitter antennas are activated during each time signaling period. A low complexity Sphere Decoding (SD) algorithm to achieve maximum likelihood (ML) detection has recently been proposed by using subproblem partitions, sorting preprocessing and radius updating. However, the ordering method has a serious limitation when the number of activated antennas is equal to the number of received antennas. Therefore, alternative sorting methods are studied in the present paper. In addition, the computational cost of the ML algorithm can be high when the system sizes increases. In this paper a suboptimal version is proposed where only the first L SD subproblems are carried out. The results show that the proposed algorithm achieves near optimal performance at lower computational cost than ML algorithms., This work has been partially supported by Spanish Ministry of Science, Innovation and Universities and by European Union through grant RTI2018-098085- BC41 (MCUI/AEI/FEDER), by GVA through PROMETEO/2019/109 and by Catedra Telefonica-UPV through SSENCE project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Personal Sound Zones by Subband Filtering and Time Domain Optimization

  • Molés-Cases, Vicent
  • Piñero, Gema|||0000-0002-8719-8106
  • de Diego Antón, María|||0000-0001-9948-3396
  • Gonzalez, Alberto|||0000-0002-6984-3212
[EN] Personal Sound Zones (PSZ) systems aim to render independent sound signals to multiple listeners within a room by using arrays of loudspeakers. One of the algorithms used to provide PSZ is Weighted Pressure Matching (wPM), which computes the filters required to render a desired response in the listening zones while reducing the acoustic energy arriving to the quiet zones. This algorithm can be formulated in time and frequency domains. In general, the time-domain formulation (wPM-TD) can obtain good performance with shorter filters and delays than the frequency-domain formulation (wPM-FD). However, wPM-TD requires higher computation for obtaining the optimal filters. In this article, we propose a novel approach to the wPM algorithm named Weighted Pressure Matching with Subband Decomposition (wPMSD), which formulates an independent time-domain optimization problem for each of the subbands of a Generalized Discrete Fourier Transform (GDFT) filter bank. Solving the optimization independently for each subband has two main advantages: 1) lower computational complexity than wPM-TD to compute the optimal filters; 2) higher versatility than the classic wPM algorithms, as it allows different configurations (sets of loudspeakers, filter lengths, etc.) in each subband. Moreover, filtering the input signals with a GDFT filter bank (as in wPM-SD) requires lower computational effort than broadband filtering (as in wPM-TD and wPM-FD), which is beneficial for practical PSZ systems. We present experimental evaluations showing that wPM-SD offers very similar performance to wPM-TD. In addition, two cases where the versatility of wPM-SD is beneficial for a PSZ system are presented and experimentally validated., This work was supported by Grants RTI2018-098085-B-C41 (MCIU/AEI/FEDER, UE), RED2018-102668-T and PROMETEO/2019/109. The work of Vicent Moles-Cases has been supported by Spanish Ministry of Education under Grant FPU17/01288.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Parallel signal detection for generalized spatial modulation MIMO systems

  • García Mollá, Víctor Manuel|||0000-0003-4768-7367
  • Simarro, M. Angeles|||0000-0001-6238-2532
  • Martínez Zaldívar, Francisco José|||0000-0002-7845-6273
  • Alonso-Jordá, Pedro|||0000-0002-6882-6592
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • Boratto, Murilo
[EN] Generalized Spatial Modulation is a recently developed technique that is designed to enhance the efficiency of transmissions in MIMO Systems. However, the procedure for correctly retrieving the sent signal at the receiving end is quite demanding. Specifically, the computation of the maximum likelihood solution is computationally very expensive. In this paper, we propose a parallel method for the computation of the maximum likelihood solution using the parallel computing library OpenMP. The proposed parallel algorithm computes the maximum likelihood solution faster than the sequential version, and substantially reduces the worst-case computing times., This work has been partially supported by the Spanish Ministry of Science, Innovation and Universities and by the European Union through grant RTI2018- 098085-BC41 (MCUI/AEI/FEDER), by GVA through PROMETEO/2019/109, and by RED 2018-102668-T. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multi-tone Active Noise Equalizer with Spatially Distributed User-selected Profiles

  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • de Diego Antón, María|||0000-0001-9948-3396
  • Piñero, Gema|||0000-0002-8719-8106
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • Hassani, Amin
  • Moonen, Marc
[EN] In this work we propose a multi-channel active noise equalizer (ANE) that can deal with multi-frequency noise signals and assigns simultaneously different equalization gains to each frequency component at each monitoring sensor. For this purpose, we state a pseudo-error noise signal for each sensor of the ANE, which has to be cancelled out in order to get the desired equalization profiles. Firstly the optimal analytic solution for the ANE filters in the case of single-frequency noise is provided, and an adaptive algorithm based on the Least Mean Squared (LMS) is proposed for the same case. We also show that this adaptive strategy reaches the theoretical solution in steady state. Secondly, we state an equivalent approach for the case of multi-frequency noise based on two alternatives: a common pseudo-error signal at each sensor for all frequencies, and a different pseudo-error signal at each sensor for each frequency. The analytic and adaptive solutions for the ANE control filters have been developed for both pseudo-error alternatives. Finally, the ability of the proposed ANE to achieve simultaneously different user-selected noise profiles in different locations has been validated by their transfer functions and simulations., This work was supported by EU jointly with Spanish Government and Generalitat Valenciana under Grants RTI2018-098085-BC41, PID2021-125736OB-I00 (MCIU/AEI/FEDER), RE D2018-102668-T, and PROMETEO/2019/109.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Smart Sound Control in Acoustic Sensor Networks: a Perceptual Perspective

  • Estreder-Campos, Juan|||0000-0001-9728-4422
[ES] Los sistemas de audio han experimentado un gran desarrollo en los últimos años gracias al aumento de dispositivos con procesadores de alto rendimiento capaces de realizar un procesamiento cada vez más eficiente. Además, las comunicaciones inalámbricas permiten a los dispositivos de una red estar ubicados en diferentes lugares sin limitaciones físicas. La combinación de estas tecnologías ha dado lugar a la aparición de las redes de sensores acústicos (ASN). Una ASN está compuesta por nodos equipados con transductores de audio, como micrófonos o altavoces. En el caso de la monitorización acústica del campo, sólo es necesario incorporar sensores acústicos a los nodos ASN. Sin embargo, en el caso de las aplicaciones de control, los nodos deben interactuar con el campo acústico a través de altavoces. La ASN puede implementarse mediante dispositivos de bajo coste, como Raspberry Pi o dispositivos móviles, capaces de gestionar varios micrófonos y altavoces y de ofrecer una buena capacidad de cálculo. Además, estos dispositivos pueden comunicarse mediante conexiones inalámbricas, como Wi-Fi o Bluetooth. Por lo tanto, en esta tesis, se propone una ASN compuesta por dispositivos móviles conectados a altavoces inalámbricos mediante un enlace Bluetooth. Además, el problema de la sincronización entre los dispositivos de una ASN es uno de los principales retos a abordar, ya que el rendimiento del procesamiento de audio es muy sensible a la falta de sincronismo. Por lo tanto, también se lleva a cabo un análisis del problema de sincronización entre dispositivos conectados a altavoces inalámbricos en una ASN. En este sentido, una de las principales aportaciones es el análisis de la latencia de audio cuando los nodos acústicos de la ASN están formados por dispositivos móviles que se comunican altavoces mediante enlaces Bluetooth. Una segunda contribución significativa de esta tesis es la implementación de un método para sincronizar los diferentes dispositivos de una ASN, junto con un estudio de sus limitaciones. Por último, se ha introducido el método propuesto para implementar aplicaciones de zonas sonoras personales (PSZ). Por lo tanto, la implementación y el análisis del rendimiento de diferentes aplicaciones de audio sobre una ASN compuesta por dispositivos móviles y altavoces inalámbricos es también una contribución significativa en el área de las ASN. Cuando el entorno acústico afecta negativamente a la percepción de la señal de audio emitida por los altavoces de la ASN, se uti­lizan técnicas de ecualización para mejorar la percepción de la señal de audio. Para ello, en esta tesis se implementa un sistema de ecualización inteligente. Para ello, se emplean algoritmos psicoacústicos para implementar un procesamiento inteligente basado en el sis­tema auditivo humano capaz de adaptarse a los cambios del entorno. Por ello, otra contribución importante de esta tesis es el análisis del enmas­caramiento espectral entre dos sonidos complejos. Este análisis permitirá calcular el umbral de enmascaramiento de un sonido con más precisión que los métodos utilizados actualmente. Este método se utiliza para implementar una aplicación de ecualización perceptiva que pretende mejorar la percepción de la señal de audio en presencia de un ruido ambien­tal. Para ello, esta tesis propone dos algoritmos de ecualización diferentes: 1) la pre-ecualización de la señal de audio para que se perciba por encima del umbral de enmascaramiento del ruido ambiental y 2) diseñar un con­trol de ruido ambiental perceptivo en los sistemas de ecualización activa de ruido (ANE), para que el nivel de ruido ambiental percibido esté por debajo del umbral de enmascaramiento de la señal de audio. Por lo tanto, la ultima aportación de esta tesis es la implementación de una aplicación de ecualización perceptiva con los dos diferentes algorit­mos de ecualización embebidos y el análisis de su rendimiento a través del banco de pruebas realizado en el laboratorio GTAC-iTEAM., [CA] El sistemes de so han experimentat un gran desenvolupament en els últims anys gràcies a l'augment de dispositius amb processadors d'alt rendiment capaços de realitzar un processament d'àudio cada vegada més eficient. D'altra banda, l'expansió de les comunicacions inalàmbriques ha permès implementar xarxes en les quals els dispositius poden estar situats a difer­ents llocs sense limitacions físiques. La combinació d'aquestes tecnologies ha donat lloc a l'aparició de les xarxes de sensors acústics (ASN). Una ASN està composta per nodes equipats amb transductors d'àudio, com micr`ofons o altaveus. En el cas del monitoratge del camp acústic, només cal incorporar sensors acústics als nodes de l'ASN. No obstant això, en el cas de les aplicacions de control, els nodes han d'interactuar amb el camp acústic a través d'altaveus. Una ASN pot implementar-se mitjant¿cant dispositius de baix cost, com ara Raspberry Pi o dispositius mòbils, capaços de gestionar di­versos micròfons i altaveus i d'oferir una bona capacitat computacional. A més, aquests dispositius poden comunicar-se a través de connexions inalàmbriques, com Wi-Fi o Bluetooth. Per això, en aquesta tesi es proposa una ASN composta per dispositius mòbils connectats a altaveus inalàmbrics a través d'un enllaç Bluetooth. El problema de la sincronització entre els dispositius d'una ASN és un dels principals reptes a abordar ja que el rendiment del processament d'àudio és molt sensible a la falta de sincronisme. Per tant, també es duu a terme una anàlisi profunda del problema de la sincronització entre els dispositius comercials connectats als altaveus inalàmbrics en una ASN. En aquest sentit, una de les principals contribucions és l'anàlisi de la latència d'àudio quan els nodes acústics en l'ASN estan compostos per dispositius mòbils que es comuniquen amb els altaveus corresponents mitjançant enllaços Bluetooth. Una segona contribuciò sig­nificativa d'aquesta tesi és la implementació d'un mètode per sincronitzar els diferents dispositius d'una ASN, juntament amb un estudi de les seves limitacions. Finalment, s'ha introduït el mètode proposat per implemen­tar aplicacions de zones de so personal. Per tant, la implementació i l'anàlisi del rendiment de diferents aplicacions d'àudio sobre una ASN composta per dispositius mòbils i al­taveus inalàmbrics és també una contribució significativa a l'àrea de les ASN. Quan l'entorn acústic afecta negativament a la percepció del senyal d'àudio emesa pels altaveus de l'ASN, es fan servir tècniques d'equalització per a millorar la percepció del senyal d'àudio. En consequència, en aquesta tesi s'implementa un sistema d'equalització intel·ligent. Per això, s'utilitzen algoritmes psicoacústics per implementar un processament intel·ligent basat en el sistema audi­tiu humà capaç d'adaptar-se als canvis de l'entorn. Per aquest motiu, una altra contribució important d'aquesta tesi és l'anàlisi de l'emmascarament espectral entre dos sons complexos. Aquesta anàlisi permetrà calcular el llindar d'emmascarament d'un so sobre amb més precisió que els mètodes utilitzats actualment. Aquest mètode s'utilitza per a imple­mentar una aplicació d'equalització perceptual que pretén millorar la per­cepció del senyal d'àudio en presència d'un soroll ambiental. Per això, aquesta tesi proposa dos algoritmes d'equalització diferents: 1) la pree­qualització del senyal d'àudio perquè es percebi per damunt del llindar d'emmascarament del soroll ambiental i 2) dissenyar un control de soroll ambiental perceptiu en els sistemes d'equalització activa de soroll (ANE) de manera que el nivell de soroll ambiental percebut estiga per davall del llindar d'emmascarament del senyal d'àudio. Per tant, l'última aportació d'aquesta tesi és la implementació d'una aplicació d'equalització perceptiva amb els dos algoritmes d'equalització embeguts i l'anàlisi del seu rendiment a través del banc de proves realitzat al laboratori GTAC-iTEAM., [EN] Audio systems have been extensively developed in recent years thanks to the increase of devices with high-performance processors able to per­form more efficient processing. In addition, wireless communications allow devices in a network to be located in different places without physical limitations. The combination of these technologies has led to the emergence of Acoustic Sensor Networks (ASN). An ASN is com­posed of nodes equipped with audio transducers, such as microphones or speakers. In the case of acoustic field monitoring, only acoustic sensors need to be incorporated into the ASN nodes. However, in the case of control applications, the nodes must interact with the acoustic field through loudspeakers. ASN can be implemented through low-cost devices, such as Rasp­berry Pi or mobile devices, capable of managing multiple mi­crophones and loudspeakers and offering good computational capacity. In addition, these devices can communicate through wireless connections, such as Wi-Fi or Bluetooth. Therefore, in this dissertation, an ASN composed of mobile devices connected to wireless speak­ers through a Bluetooth link is proposed. Additionally, the problem of syn­chronization between the devices in an ASN is one of the main challenges to be addressed since the audio processing performance is very sensitive to the lack of synchronism. Therefore, an analysis of the synchroniza­tion problem between devices connected to wireless speakers in an ASN is also carried out. In this regard, one of the main contributions is the analysis of the audio latency of mobile devices when the acoustic nodes in the ASN are comprised of mobile devices communicating with the corresponding loudspeakers through Bluetooth links. A second significant contribution of this dissertation is the implementation of a method to synchronize the different devices of an ASN, together with a study of its limitations. Finally, the proposed method has been introduced in order to implement personal sound zones (PSZ) applications. Therefore, the imple­mentation and analysis of the performance of different audio applications over an ASN composed of mobile devices and wireless speakers is also a significant contribution in the area of ASN. In cases where the acoustic environment negatively affects the percep­tion of the audio signal emitted by the ASN loudspeakers, equalization techniques are used with the objective of enhancing the perception thresh­old of the audio signal. For this purpose, a smart equalization system is implemented in this dissertation. In this regard, psychoacous­tic algorithms are employed to implement a smart processing based on the human hearing system capable of adapting to changes in the envi­ronment. Therefore, another important contribution of this thesis focuses on the analysis of the spectral masking between two complex sounds. This analysis will allow to calculate the masking threshold of one sound over the other in a more accurate way than the currently used methods. This method is used to implement a perceptual equalization application that aims to improve the perception threshold of the audio signal in presence of ambient noise. To this end, this thesis proposes two different equalization algorithms: 1) pre-equalizing the audio signal so that it is perceived above the ambient noise masking threshold and 2) designing a perceptual control of ambient noise in active noise equalization (ANE) systems, so that the perceived ambient noise level is below the masking threshold of the audio signal. Therefore, the last contribution of this dissertation is the imple­mentation of a perceptual equalization application with the two different embedded equalization algorithms and the analysis of their performance through the testbed carried out in the GTAC-iTEAM laboratory., This work has received financial support of the following projects: • SSPRESING: Smart Sound Processing for the Digital Living (Reference: TEC2015-67387-C4-1-R. Entity: Ministerio de Economia y Empresa. Spain). • FPI: Ayudas para contratos predoctorales para la formación de doctores (Reference: BES-2016-077899. Entity: Agencia Estatal de Investigación. Spain). DANCE: Dynamic Acoustic Networks for Changing Environments (Reference: RTI2018-098085-B-C41-AR. Entity: Agencia Estatal de Investigación. Spain). • DNOISE: Distributed Network of Active Noise Equalizers for Multi-User Sound Control (Reference: H2020-FETOPEN-4-2016-2017. Entity: I+D Colaborativa competitiva. Comisión de las comunidades europea).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Affine Projection Algorithm Over Acoustic Sensor Networks for Active Noise Control

  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • de Diego Antón, María|||0000-0001-9948-3396
  • Piñero, Gema|||0000-0002-8719-8106
  • Gonzalez, Alberto|||0000-0002-6984-3212
[EN] Acoustic sensor networks (ASNs) are an effective solution to implement active noise control (ANC) systems by using distributed adaptive algorithms. On one hand, ASNs provide scalable systems where the signal processing load is distributed among the network nodes. On the other hand, their noise reduction performance is comparable to that of their respective centralized processing systems. In this sense, the distributed multiple error filtered-x least mean squares (DMEFxLMS) adaptive algorithm has shown to obtain the same performance than its centralized counterpart as long as there are no communications constraints in the underlying ASN. Regarding affine projection (AP) adaptive algorithms, some distributed approaches that are approximated versions of the multichannel filtered-x affine projection (MFxAP) algorithm have been previously proposed. These AP algorithms can efficiently share the processing load among the nodes, but at the expense of worsening their convergence properties. In this paper we develop the exact distributed multichannel filtered-x AP (EFxAP) algorithm, which obtains the same solution as that of the MFxAP algorithm as long as there are no communications constraints in the underlying ASN. In the EFxAP algorithm each node can compute a part or the entire inverse matrix needed by the centralized MFxAP algorithm. Thus, we propose three different strategies that obtain significant computational saving: 1) Gauss Elimination, 2) block LU factorization, and 3) matrix inversion lemma. As a result, each node computes only between 25%¿60% of the number of multiplications required by the direct inversion of the matrix. Regarding the performance in transient and steady states, the EFxAP exhibits the fastest convergence and the highest noise level reduction for any size of the acoustic network and any projection order of the AP algorithm compared to the DMEFxLMS and two previously reported distributed AP algorithms., This work was supported by EU together with Spanish Government through RTI2018-098085B-C41 (MINECO/FEDER) and Generalitat Valenciana through PROMETEO/2019/109.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Parallel border tracking in binary images using GPUs

  • García Mollá, Víctor Manuel|||0000-0003-4768-7367
  • Alonso-Jordá, Pedro|||0000-0002-6882-6592
  • García-Laguía, Ricardo
[EN] Border tracking in binary images is an important kernel for many applications. There are very efficient sequential algorithms, most notably, the algorithm proposed by Suzuki et al., which has been implemented for CPUs in well-known libraries. However, under some circumstances, it would be advantageous to perform the border tracking in GPUs as efficiently as possible. In this paper, we propose a parallel version of the Suzuki algorithm that is designed to be executed in GPUs and implemented in CUDA. The proposed algorithm is based on splitting the image into small rectangles. Then, a thread is launched for each rectangle, which tracks the borders in its associated rectangle. The final step is to perform the connection of the borders belonging to several rectangles. The parallel algorithm has been compared with a state-of-the-art sequential CPU version, using two different CPUs and two different GPUs for the evaluation. The computing times obtained show that in these experiments with the GPUs and CPUs that we had available, the proposed parallel algorithm running in the fastest GPU is more than 10 times faster than the sequential CPU routine running in the fastest CPU., This work has been partially supported by the Spanish Ministry of Science, Innovation and Universities and the European Union through Grant RTI2018-098085-BC41 (MCUI/AEI/FEDER) and by GVA through PROMETEO/2019/109. The authors would also like to thank the AUTIS, S.L. company for their support of this work.