Pasar al contenido principal

ADAPTIVE SOUND-PROCESSING TECHNOLOGIES FOR SOUNDFIELD DEPLOYMENT: ALGORITHMS, TOOLS AND TEST BEDS

PID2021-125736OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gpu generation of binary 2-separating codes

  • Fernandez, Marcel
  • Livieratos, John
  • Martínez Zaldívar, Francisco José|||0000-0002-7845-6273
  • García Mollá, Víctor Manuel|||0000-0003-4768-7367
  • Simarro, M. Angeles|||0000-0001-6238-2532
  • Gonzalez, Alberto|||0000-0002-6984-3212
[EN] This paper addresses the generation of binary 2-separating codes and the study of the code rates that can be achieved in practice. In the case of binary 2-separating codes, there exist lower and upper theoretical bounds in the rates that can be achieved. The generation of 2-separating codes has been studied from a theoretical point of view, but, as far as we know, it has not been tackled from a practical point of view. In this paper, we consider and analyze two different generation algorithms. Both algorithms were implemented in CUDA and executed in GPUs, for the sake of efficiency. The first algorithm is inspired by the Moser-Tardos algorithm, which is based on the Local Lov & aacute;sz Lemma. This algorithm has a strong theoretical appeal; codes obtained through this first algorithm can be shown to match the best known lower bound. To generate codes with rates as large as possible, a second algorithm has been implemented. The rates achieved are larger than those achieved with the first algorithm, but they still are very far from the theoretical upper bound. The results obtained suggest that the theoretical upper bound can probably be improved., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work was supported in part by the Spanish Ministery of Science and Innovation under grant PID2021-125736OB-I00 (MCIN/AEI /10.13039/501100011033/, ERDF A way of making Europe ), and by GVA under grant CIPROM/2022/20. The work of Marcel Fernández has been supported by TCO-RISEBLOCK (PID2019-110224RB-I00) MINECO.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of stability of distributed FxLMS active noise control systems

  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • García Mollá, Víctor Manuel|||0000-0003-4768-7367
  • Vidal Maciá, Antonio Manuel
  • de Diego Antón, María|||0000-0001-9948-3396
  • Gonzalez, Alberto|||0000-0002-6984-3212
[EN] This paper addresses the assessment of the stability of distributed active noise control (ANC) systems, which are designed to cancel acoustic noise at given points in space. These systems distribute the control task across several simple acoustic nodes that generate the control signals by filtering a noise reference signal. The coefficients of each node filter are iteratively calculated by the filtered-X LMS algorithm. The nodes remain stable when the adaptive filters computed in each node converge to finite values. However, the acoustic coupling among nodes can cause instability (i.e., divergence). Collaboration among nodes is required to avoid this phenomenon. It is shown that the properties of the system are summarized in a system matrix and that the system remains stable when the real parts of all of the eigenvalues of this system matrix are positive. However, computation of all of the eigenvalues is computationally expensive. In this paper, we propose a fast method for checking the positiveness of the real parts of the system matrix eigenvalues. It is shown that the proposed method is faster than the direct calculation of eigenvalues and it assesses the stability/instability of the ANC systems without any false stability outcomes and more accurately than existing alternatives., This work has been partially supported by RTI2018-098085-BC41 and PID2021-125736OB-I00 (MCIN/AEI/10.13039/501100011033/, ERDF A way of making Europe) and GVA through PROMETEO/2019/109.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low Cost Variable Step-Size LMS With Maximum Similarity to the Affine Projection Algorithm

  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • de Diego Antón, María|||0000-0001-9948-3396
  • Gonzalez, Alberto|||0000-0002-6984-3212
[EN] The LMS algorithm is widely employed in adaptive systems due to its robustness, simplicity, and reasonable performance. However, it is well known that this algorithm suffers from a slow convergence speed when dealing with colored reference signals. Numerous variants and alternative algorithms have been proposed to address this issue, though all of them entail an increase in computational cost. Among the proposed alternatives, the affine projection algorithm stands out. This algorithm has the peculiarity of starting from N data vectors of the reference signal. It transforms these vectors into as many data vectors suitably normalized in energy and mutually orthogonal. In this work, we propose a version of the LMS algorithm that, similar to the affine projection algorithm, starts from N data vectors of the reference signal but corrects them by using only a scalar factor that functions as a convergence step. Our goal is to align the behavior of this algorithm with the behavior of the affine projection algorithm without significantly increasing the computational cost of the LMS., This work was supported in part by MICIN under Grant PID2021-125736OB-I00 MCIN/AEI/10.13039/501100011033/, ERDF A way of making Europe ), in part by GVA under Grant CIPROM/2022/20, and in part by EU under IN-NOVA: Active reduction of noise transmitted into and from enclosures through encapsulated structures, Marie Sklodowska-Curie under Grant 101073037.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selection of the convergence step of the Fx-LMS algorithm

  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • de Diego Antón, María|||0000-0001-9948-3396
  • García Mollá, Víctor Manuel|||0000-0003-4768-7367
  • Gonzalez, Alberto|||0000-0002-6984-3212
[EN] The choice of a suitable convergence step that allows the fast convergence of the filtered-x LMS algorithm in practical scenarios is usually carried out by trial and error, since the theoretical developments provide only indicative values. The particularity of the filtered-x structure, which adds a delay between the output of the adaptive filter and the error signal and colors the reference signal, increases the inaccuracy of the theoretical models. Furthermore, the use of band-limited reference signals is beyond the scope of most theoretical studies, which focus on the cases of full-band reference signals, making it difficult to extrapolate these models to band-limited signals. In this paper, we propose a low-cost and meaningful method for selecting the convergence step that is well tuned in most practical cases. It can be used regardless of the type of the reference signal, the system delays, and the nature of the filter required in the filtered-x structure. Numerical simulations are performed to validate the effectiveness of the proposed approach., This work has been partially supported by RTI2018-098085-BC41 and PID2021-125736OB-I00 (MCIN/AEI/10.13039/501100011033/, "ERDF A way of making Europe") and GVA through PROMETEO/2019/109.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Parallel border tracking in binary images for multicore computers

  • García Mollá, Víctor Manuel|||0000-0003-4768-7367
  • Alonso-Jordá, Pedro|||0000-0002-6882-6592
[EN] Border tracking in binary images is an important operation in many computer vision applications. The problem consists in finding borders in a 2D binary image (where all of the pixels are either 0 or 1). There are several algorithms available for this problem, but most of them are sequential. In a former paper, a parallel border tracking algorithm was proposed. This algorithm was designed to run in Graphics Processing units, and it was based on the sequential algorithm known as the Suzuki algorithm. In this paper, we adapt the previously proposed GPU algorithm so that it can be executed in multicore computers. The resulting algorithm is evaluated against its GPU counterpart. The results show that the performance of the GPU algorithm worsens (or even fails) for very large images or images with many borders. On the other hand, the proposed multicore algorithm can efficiently cope with large images., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work has been partially supported by the Spanish Ministry of Science, Innovation, and Universities, jointly with the European Union, through Grants RTI2018-098085-BC41, PID2021-125736OB-I00 and PID2020-113656RB-C22 (MCIN/AEI/10.13039/501100011033/, "ERDF A way of making Europe"). Also, the GVA has partially supported this research through project PROMETEO/2019/109.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Remote Microphone Technique for Active Noise Control Over Distributed Networks

  • Antoñanzas, Christian
  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • de Diego Antón, María|||0000-0001-9948-3396
  • Gonzalez, Alberto|||0000-0002-6984-3212
[EN] Multichannel Active Noise Control (ANC) headrest systems have usually been designed with the objective of creating quiet areas at the passenger positions within the cabin of a public transport. Due to the high computational demands of dealing with multiple loudspeakers and multiple microphones by using a single centralized processor, and the convenience of a scalable system, a distributed implementation may be advisable. On the other hand, the addition of the remote microphone (RM) technique to the ANC headrest systems has recently allowed the creation of local zones of quiet at unachievable placements for the error sensors. This technique allows the quiet zone to be shifted to a desired location away from the physical sensor. However, to our knowledge, the implementation of an ANC headrest system with virtual microphones over a distributed acoustic sensor network has not been addressed. In this work, a distributed version of the multiple-error FxLMS (MEFxLMS) algorithm considering the RM method (RM-DMEFxLMS) is proposed by using an alternative formulation of the RM method. Through a set of simulations, it is found that on a non-constrained communication network, the proposed algorithm presents the same performance of its centralized version and provides a scalable and more versatile ANC system., This work was supported in part by MCIN/AEI/10.13039/501100011033/, ERDF A way of making Europe under Grants RTI2018-098085-BC41 and PID2021-125736OB-I00, and in part by GVA through PROMETEO/2019/109. The associate editor coordinating the review of this manuscript and approving it for publication was Dr. Romain Serizel.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selective collaboration in distributed FxLMS active noise control systems

  • García Mollá, Víctor Manuel|||0000-0003-4768-7367
  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • de Diego Antón, María|||0000-0001-9948-3396
  • Gonzalez, Alberto|||0000-0002-6984-3212
[EN] This paper addresses the selection of the collaboration configuration on distributed active noise control (ANC) systems. ANC systems aim to cancel out acoustic noise within a listening area. In distributed systems, the control task is delegated among multiple acoustic control nodes that generate the control signals by filtering a noise reference signal. The coefficients of each node filter are iteratively calculated using the filtered-X LMS algorithm. The stability is achieved when the adaptive filters computed in each node converge to finite values. However, acoustic coupling among nodes could lead to instability (i.e., divergence). Collaboration among selected nodes may avoid this phenomenon, although not just any collaboration configuration guarantees network stability. On the other hand, a collaborative distributed system presents two drawbacks: the stability assessment is computationally expensive, and communication requirements increase with the number of collaborations among nodes. In this paper, we propose and discuss several methods to establish a collaboration configuration that ensures system stability. The optimal configuration, which is characterized by the minimal number of necessary collaborations between nodes, can be identified through exhaustive search. However, this approach incurs a high computational cost, particularly in networks with many nodes. To address this challenge, we introduce several heuristic methods aimed at efficiently obtaining stable configurations., This work was supported in part by the Spanish Ministery of Science and Innovation under grant PID2021-125736OB-I00 (MCIN/AEI/10.13039/501100011033/, "ERDF A way of making Europe") , and by GVA under grant CIPROM/2022/20, and by EU under IN-NOVA: Active reduction of noise transmitted into and from enclosures through encapsulated structures, Marie Sklodowska-Curie grant agreement no. 101073037.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multi-tone Active Noise Equalizer with Spatially Distributed User-selected Profiles

  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • de Diego Antón, María|||0000-0001-9948-3396
  • Piñero, Gema|||0000-0002-8719-8106
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • Hassani, Amin
  • Moonen, Marc
[EN] In this work we propose a multi-channel active noise equalizer (ANE) that can deal with multi-frequency noise signals and assigns simultaneously different equalization gains to each frequency component at each monitoring sensor. For this purpose, we state a pseudo-error noise signal for each sensor of the ANE, which has to be cancelled out in order to get the desired equalization profiles. Firstly the optimal analytic solution for the ANE filters in the case of single-frequency noise is provided, and an adaptive algorithm based on the Least Mean Squared (LMS) is proposed for the same case. We also show that this adaptive strategy reaches the theoretical solution in steady state. Secondly, we state an equivalent approach for the case of multi-frequency noise based on two alternatives: a common pseudo-error signal at each sensor for all frequencies, and a different pseudo-error signal at each sensor for each frequency. The analytic and adaptive solutions for the ANE control filters have been developed for both pseudo-error alternatives. Finally, the ability of the proposed ANE to achieve simultaneously different user-selected noise profiles in different locations has been validated by their transfer functions and simulations., This work was supported by EU jointly with Spanish Government and Generalitat Valenciana under Grants RTI2018-098085-BC41, PID2021-125736OB-I00 (MCIU/AEI/FEDER), RE D2018-102668-T, and PROMETEO/2019/109.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-Complexity Machine Learning Models for Active Noise Control in Nonlinear Systems

  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • de Diego Antón, María|||0000-0001-9948-3396
  • Gonzalez, Alberto|||0000-0002-6984-3212
[EN] Active Noise Control (ANC) systems are typically based on adaptive filters. However, electroacoustic transducers and their associated electronic components often exhibit nonlinear behaviors that linear controllers cannot accurately model, resulting in suboptimal performance. While neural networks and other advanced models have been proposed to address these limitations, their high computational demands and inherent latency frequently restrict real-time deployment. This work investigates the use of lightweight, computationally efficient machine learning (ML) models that operate on a sample-by-sample basis using simple digital operators. The proposed models are applied to ANC under nonlinear conditions, including distortions in the primary path, the secondary path, and the reference signal. The approach enhances noise attenuation while preserving low computational complexity, thereby enabling real-time implementation on embedded systems. Simulation results confirm the effectiveness of the method across a variety of nonlinear scenarios, demonstrating superior noise reduction and control accuracy compared to conventional linear ANC schemes, and achieving this at a significantly lower cost than alternative nonlinear approaches., This work was supported in part by State Research Agency (AEI), MICIU/AEI/10.13039/501100011033 under Grant PID2021-125736OB-I00 and Grant PID2024-161353NB-C22, in part by Generalitat Valenciana, Conselleria de Innovation, Universities, Science and Digital Society, through PROMETEO Programme under Project CIPROM/2022/20, and in part by the EU through IN-NOVA, active reduction of noise transmitted into and from enclosures through encapsulated structures under Grant 101073037.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Filtered-X Quasi Affine Projection Algorithm for Active Noise Control Networks

  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • de Diego Antón, María|||0000-0001-9948-3396
  • Gonzalez, Alberto|||0000-0002-6984-3212
[EN] The affine projection (AP) algorithm enhances the performance of gradient-based adaptive algorithms when dealing with colored reference signals, which is typically the case with filtered-X type algorithms. This enhancement is achieved by using various delayed versions of the reference signal data vector, which are appropriately orthogonalized and normalized to optimize convergence performance. The number of these vectors, known as the projection order of the AP, increases the computational requirements, mainly due to the calculation of a matrix inversion whose dimensions are proportional to this projection order. When used in distributed systems, the AP algorithm typically requires each acoustic node in the system to compute the complete matrix inversion, even though they only need a specific set of data (a subblock) from it. This means that the AP does not offer much advantage in terms of computational savings when used in distributed collaborative networks. To address this issue, an approximate version of the filtered-X affine projection (FXAP) algorithm is introduced in this work. This approximate version avoids the matrix inversion computation in each iteration using a precalculated inverse matrix. This strategy provides computational savings and enables easy distribution of the algorithm. Additionally, a variable step-size approach is proposed to mitigate the deviation caused by a precalculated matrix, which provides good performance, high robustness, and cost-effective distribution., This work was supported in part by MICIN under Grant PID2021-125736OB-I00, in part by MCIN/AEI/10.13039/501100011033/, ERDF A way of making Europe, in part by GVA/CIUCSD under Grant CIPROM/2022/20, in part by EU through IN-NOVA, active reduction of noise transmitted into and from enclosures through encapsulated structures, and in part by Marie Sklodowska-Curie under Grant 101073037.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Error Innovation-based Adaptive Kalman Filter for multi-channel Active Noise Control

  • Islam, Tahmida
  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • de Diego Antón, María|||0000-0001-9948-3396
  • Gonzalez, Alberto|||0000-0002-6984-3212
[EN] This paper presents an Error Innovation-based Adaptive Estimation Kalman Filter (eIAEKF) tailored for multi-channel Active Noise Control (ANC) systems using MIMO filtered-x structures. Conventional Kalman-based ANC methods are computationally demanding and typically rely on fixed or manually tuned noise covariance matrices, limiting their robustness under changing acoustic conditions. The proposed eIAEKF introduces an error-driven mechanism that adaptively updates the measurement-noise covariance using the measured error signal, directly aligning the estimation process with the ANC objective. Building on the principles of innovation-based adaptive estimation, the algorithm reduces computational complexity by avoiding the need for an explicit transition matrix and by simplifying the computation of the Kalman gain, while also improving robustness to poor initialization. Simulation results under both stationary and dynamic scenarios, including changes in the primary noise spectrum, source position, and microphone location, show that eIAEKF achieves faster convergence and higher attenuation than an adaptive Kalman-like baseline, while maintaining numerical stability. Real-time experiments on a hardware platform further demonstrate the practical viability of the proposed approach., This work was supported by in part by MICIN under Grants PID2021-125736OB-I00 and PID2024-161353NB-C22 (MCIN/AEI/10.13039/501100011033/FEDER UE, "ERDF A way of making Europe") , in part by GVA under Grant CIPROM/2022/20, and in part by EU through Marie Sklodowska-Curie Action, HORIZON-MSCA-2021-DN, IN-NOVA (Active reduction of noise transmitted into and from enclosures through encapsulated structures) under Grant 101073037.