Pasar al contenido principal

IMPLEMENTACION DE ENTORNOS CONTEXTUALES INTERACTIVOS, CONECTADOS Y SEGUROS PARA EL TRANSPORTE FERROVIARIO DE PASAJEROS APOYADOS EN LA IOT Y TECNICAS DE SOFT COMPUTING

RTI2018-095499-B-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 65
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Implementation of an interactive environment with multilevel wireless links for distributed botanical garden in University Campus

  • Klaina , Hicham
  • Picallo, Imanol
  • López Iturri, Peio
  • Astrain, José Javier
  • Azpilicueta, Leyre
  • Aghzout, Otman
  • Vázquez Alejos, Ana Maria
  • Falcone Lanas, Francisco
In this contribution, an end to end system to enable user interaction with a distributed botanicaluniversity campus garden is designed, implemented and tested. The proposed system employs differentwireless links to collect data related to different bio physiological parameters of both the vegetation massand the surrounding environment. Detailed analysis of these multilevel communication links is performedby using deterministic volumetric wireless channel estimation and considering underground, near groundand over ground radio propagation conditions. An in-house developed technique enables accurate wirelesschannel characterization for complete campus scenario considering the multiple link types and all itscomposing elements. Node definition and network topology is thus obtained by wireless channel analysis ofover ground, near ground and underground communication for both 868 MHz and 2.4 GHz Wireless SensorNetworks in an inhomogeneous vegetation environment. Connectivity to enable user interaction as well asfor telemetry and tele-control purposes within the campus is achieved by combining ZigBee and LoRaWANtransceivers with the corresponding sensor/actuator platforms. Coverage studies have been performed inorder to assess communication capabilities in the set of multiple underground/near ground/over groundlinks, by means of deterministic channel analysis for the complete university campus location. Measurementresults in lab environment as well as full system deployment are presented, showing good agreement withdeterministic simulations. Moreover, system level tests have been performed over a physical campus cloud,providing adequate quality of experience metrics. The proposed solution is a scalable system that providesreal time trees status monitoring by a cloud-based platform, enabling user interaction within a distributedbotanical garden environment in the university campus., Ministerio de Economía y Competitividad | Ref. TEC2017-85529-C03-3R, Agencia Estatal de Investigación | Ref. RTI2018-095499-B-C31, Xunta de Galicia
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Aggregator to electric vehicle LoRaWAN based communication analysis in vehicle-to-grid systems in smart cities

  • Klaina , Hicham
  • Guembe, Imanol Picallo
  • Lopez Iturri, Peio
  • Astrain, Jose Javier
  • Azpilicueta, Leyre
  • Aghzout, Otman
  • Vázquez Alejos, Ana Maria
  • Falcone, Francisco
Recently, there has been growing attention to the power grid management due to the increasing concerns on global warming. With the advancement in electric vehicles (EV) industry and the evolution in batteries, EVs become an important contributor to the grid with capability of bidirectional power exchange with the grid. In this context, Vehicle-to-Grid (V2G) systems enable multiple functionalities between EVs and the corresponding aggregator. Thus, reliable, long-range communication capabilities between aggregator and EVs is compulsory. In this paper, wireless channel analysis for aggregator and electrical vehicle communication using Long-Range Wide Area Network (LoRaWAN) technology in V2G is presented,in order to test a low-cost solution with large coverage and reduced power consumption profile. Wireless channel and system-level measurements have been performed in a real urban scenario between EV’s charging station in Pamplona (Spain) and a vehicle in motion using LoRaWAN 868 MHz devices. Wireless channel characterization is performed by implementing a full 3D urban scenario model, including elements such as buildings, vehicles, users and urban infrastructure such as lamp posts and benches. By means of in-house developed 3D Ray Launching algorithm with hybrid simulation capabilities, estimations of received power levels, signal to noise ratio and time domain parameters have been obtained, for the complete volume of the scenario under test in dense urban conditions. V2G end to end communication has been validated by implementing an intra-vehicle Controller Area Network-BUS (CAN BUS) data gathering system connected to the vehicle LoRaWAN transceiver and subsequently, to a cloud-based web service. The results show that the accurate deterministic based radio channel analysis enables to optimize the network design of LoRaWAN networks in a vehicular environment, considering inter-vehicular and infrastructure links, enabling scalable,low cost end to end data exchange for the deployment of ancillary V2G services., Agencia Estatal de Investigación | Ref. RTI2018-095499-B-C31, Ministerio de Economía y Competitividad | Ref. TEC2017-85529-C03-3R, Xunta de Galicia
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Validation of 3D simulation tool for radio channel modeling at 60 GHz: A meeting point for empirical and simulation-based models

  • Celaya Echarri, Mikel
  • Azpilicueta, Leyre
  • López Iturri, Peio
  • Falcone Lanas, Francisco
  • García Sánchez, Manuel
  • Vázquez Alejos, Ana Maria
The radio channel modelling of the millimeter wave bands for the fifth generation of wireless mobile communications, appears as a challenge for both empirical and simulation approaches. In this paper we discuss the use of experimental datasets for validation of a simulation tool based on deterministic 3D ray-launching technique. The goal it twofold: validating the simulation tool and achieving more consistent results considering the restrictions and performance limits of hardware elements. A microcell canyon street scenario has been chosen for interleaving ray launching prediction and empirical analysis. Simulation results such as received power or angular distribution of path loss, as well as channel dispersion parameters such as root-mean-square delay spread have been presented. In addition, the line-of-sight to non-line-of-sight transition has been modeled as a result of the empirical-simulation interaction. Comparison of simulation and measurement results for the proposed microcellular urban scenario exhibit good agreement, validating the proposed methodology., Agencia Estatal de Investigación | Ref. RTI2018-095499-B-C31, Agencia Estatal de Investigación | Ref. TEC2017-85529-C03-3R, Universidade de Vigo
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Propagation models in vehicular communications

  • Rodríguez Corbo, Fidel Alejandro
  • Azpilicueta, Leyre
  • Celaya Echarri, Mikel
  • Vázquez Alejos, Ana Maria
  • Falcone Lanas, Francisco
In the advent of becoming reality, the era of autonomous vehicles is closer than ever, and with it, the need for faster and reliable wireless connections. The propagation channel determines the performance limits of wireless communications, and with the aid of empirical measurements, channel modeling is the best approach to predict and recreate how signal propagation conditions may perform. To this end, many different approaches and techniques have been implemented, from specific applications to general models, considering the characteristics of the environment (geometry-based or non-geometry-based) as well as seeking high performance algorithms in order to achieve good balance between accuracy and computational cost. This paper provides an updated overview of propagation channel models for vehicular communications, beginning with some specific propagation characteristics of these complex heterogeneous environments in terms of diverse communication scenarios, different combinations of link types, antenna placement/diversity, potentially high Doppler shifts, or non-stationarity, among others. The presented channel models are classified in four categories: empirical, non-geometry-based stochastic, geometry-based stochastic, and deterministic models, following the classical approach. The features and key concepts of the different vehicular communications channel models are presented, from sub 6 GHz to millimeter wave (mmWave) frequency bands. The advantages and disadvantages of the main works in the area are discussed and compared in a comprehensive way, outlining their contributions. Finally, future critical challenges and research directions for modeling reliable vehicular communications are introduced, such as the effects of vegetation, pedestrians, common scatterers, micro-mobility or spherical wavefront, which in the context of the near future are presented as research opportunities., Agencia Estatal de Investigación | Ref. RTI2018-095499-B-C31, Ministerio de Economía y Competitividad | Ref. TEC2017-85529-C03-3R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Deterministic and empirical approach for millimeter-wave complex outdoor smart parking solution deployments

  • Rodríguez Corbo, Fidel Alejandro
  • Azpilicueta, Leyre
  • Celaya Echarri, Mikel
  • López Iturri, Peio
  • Vázquez Alejos, Ana Maria
  • Shubair, Raed M.
  • Falcone, Francisco
The characterization of different vegetation/vehicle densities and their corresponding effects on large-scale channel parameters such as path loss can provide important information during the deployment of wireless communications systems under outdoor conditions. In this work, a deterministic analysis based on ray-launching (RL) simulation and empirical measurements for vehicle-to-infrastructure (V2I) communications for outdoor parking environments and smart parking solutions is presented. The study was carried out at a frequency of 28 GHz using directional antennas, with the transmitter raised above ground level under realistic use case conditions. Different radio channel impairments were weighed in, considering the progressive effect of first, the density of an incremental obstructed barrier of trees, and the effect of different parked vehicle densities within the parking lot. On the basis of these scenarios, large-scale parameters and temporal dispersion characteristics were obtained, and the effect of vegetation/vehicle density changes was assessed. The characterization of propagation impairments that different vegetation/vehicle densities can impose onto the wireless radio channel in the millimeter frequency range was performed. Finally, the results obtained in this research can aid communication deployment in outdoor parking conditions., Ministerio de Ciencia, Innovación y Universidades | Ref. RTI2018-095499-B-C31
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Analysis of low power wide area network wireless technologies in smart agriculture for large-scale farm monitoring and tractor communications

  • Klaina , Hicham
  • Guembe, Imanol Picallo
  • López Iturri, Peio
  • Campo Bescós, Miguel Ángel
  • Azpilicueta, Leyre
  • Aghzout, Otman
  • Vázquez Alejos, Ana Maria
  • Falcone, Francisco
In this paper, the assessment of multiple scenario cases for large-scale farm monitoring using Low-Power Wide-Area Network (LPWAN) based near-ground sensor nodes with the interaction of both tractors and farmers are presented. The proposed scenario under analysis considers multiple communication links, namely nodes to infrastructure, nodes to tractor, nodes to farmer, tractor to infrastructure and farmer to infrastructure communications. Moreover, these scenarios are proposed for tractors and agricultural equipment performance improvement and tracking, as well as resources management within the farm field. Different link type configurations are tested in order to consider the impact of ground, spatial distribution as well as infrastructure elements. The results show that LPWAN-based WSNs can provide better performance in terms of coverage and radio link quality results than ZigBee for a non-flat large-scale farm field in both cases of near-ground fixed nodes and moving tractor and farmer. The proposed systems are validated by cloud-based platforms for LoRaWAN, Sigfox and NB-IoT communications, providing flexible and scalable solutions to enable interactive farming applications., Agencia Estatal de Investigación | Ref. TEC2017-85529-C03-3R, Agencia Estatal de Investigación | Ref. RTI2018-095499-B-C31
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Design and experimental validation of an augmented reality system with wireless integration for context aware enhanced show experience in auditoriums

  • Picallo Guembe, Imanol
  • Vidal Balea, Aida
  • Blanco Novoa, Óscar
  • López Iturri, Peio
  • Fraga Lamas, Paula
  • Klaina , Hicham
  • Fernández Caramés, Tiago M.
  • Azpilicueta, Leyre
  • Falcone Lanas, Francisco
The development of multiple cultural and social related activities, such as shows related with the performing arts, conferences or presentations rely on facilities such as auditoriums, theatres and conference sites, which are progressively including multiple technological features in order to enhance user experience. There are still however situations in which user experience is limited owing to lack of environment adaption, such as people with disabilities. In this sense, the adoption of Context Aware paradigms within auditoriums can provide adequate functionalities in order to comply with specific needs. This work is aimed at demonstrating the feasibility in enhancing user experience (e.g., improving the autonomy of disabled people) within auditorium and theatre environments, by means of an Augmented Reality (AR) device (HoloLens smart glasses) with wireless system integration. To carry out the demonstration, different elements to build AR applications are described and tested. First, an intensive measurement campaign was performed in a real auditorium in the city of Pamplona (Baluarte Congress Center) in order to evaluate the feasibility of using Wi-Fi enabled AR devices in a complex wireless propagation scenario. The results show that these environments exhibit high levels of interference, owing to the co-existence and non-coordinated operation of multiple wireless communication systems, such as on site and temporary Wi-Fi access points, wireless microphones or communications systems used by performers, staff and users. Deterministic wireless channel estimation based in volumetric 3D Ray Launching have been obtained for the complete scenario volume, in order to assess quality of service metrics. For illustration purposes, a user-friendly application to help hearing impaired people was developed and its main features were tested in the auditorium. Such an application provides users with a 3D virtual space to visualize useful multimedia content like subtitles or additional information about the show, as well as an integrated call button., Xunta de Galicia | Ref. ED431G 2019/01, Agencia Estatal de Investigación | Ref. TEC2016-75067-C4-1-R, Agencia Estatal de Investigación | Ref. RED2018-102668-T, Agencia Estatal de Investigación | Ref. PID2019-104958RB-C42, Ministerio de Ciencia, Innovación y Universidades | Ref. RTI2018-095499-B-C31
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

IoT enabled low cost distributed angle measurement fault detection system for LFR plants

  • Meligy, Rowida
  • Klaina , Hicham
  • Picallo, Imanol
  • López Iturri, Peio
  • Azpilicueta, Leyre
  • Astrain, Jose Javier
  • Rady, Mohamed
  • Villadangos, Jesus
  • Vázquez Alejos, Ana Maria
  • Falcone, Francisco
The advances in renewable solar energy generation have led to the development of Linear Fresnel Reflector (LFR) technology, in which solar energy is focused by means of a set of longitudinal mirrors onto a tubular receiver. The efficiency in the energy generation process is mainly given by the relation between the angle of incidence of incoming sunlight rays and the fixed location of the elevated tubular receiver. In order to maximize efficiency, the tilt angles for each one of the longitudinal mirrors should vary as a function of solar position tracking. The angular variation process is generally based on the use of encoders implementing a closed-loop feedback system to provide information to the controller in relation with actual mirror angular position. An alternative that has recently emerged is the use of inclinometers in order to obtain angular information, providing a cost-effective solution in order to employ angular information for mirror position control. In this work, a low cost monitoring system for LFR plants is presented, based on the use of a distributed configuration to obtain information related to mirror inclination angles. The proposed system is based on the use of accelerometers coupled to low cost wireless transceivers, enabling distributed real time data collection. The system allows fault or damage detection at all monitored mirror sections, avoiding long periods of efficiency loss of the LFR plant. The configuration and location of the wireless sensor nodes has been analyzed by means of deterministic 3D Ray Launching channel modeling, in order to optimize coverage/capacity relations within the scenario under test. The proposed system has been implemented enabling remote LFR facility monitoring by means of cloud-based infrastructure. In addition, the system is highly scalable, allowing the inclusion of other interesting applications such as intruder detection for security., Agencia Estatal de Investigación | Ref. RTI2018-095499-B-C31
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Deterministic 3D ray-launching millimeter wave channel characterization for vehicular communications in urban environments

  • Rodríguez Corbo, Fidel Alejandro
  • Azpilicueta, Leire
  • Celaya Echarri, Mikel
  • López Iturri, Peio
  • Picallo Guembe, Imanol
  • Falcone Lanas, Francisco
  • Vázquez Alejos, Ana Maria
The increasing demand for more sensors inside vehicles pursues the intention of making vehicles more “intelligent”. In this context, the vision of fully connected and autonomous cars is becoming more tangible and will turn into a reality in the coming years. The use of these intelligent transport systems will allow the integration of efficient performance in terms of route control, fuel consumption, and traffic administration, among others. Future vehicle-to-everything (V2X) communication will require a wider bandwidth as well as lower latencies than current technologies can offer, to support high-constraint safety applications and data exhaustive information exchanges. To this end, recent investigations have proposed the adoption of the millimeter wave (mmWave) bands to achieve high throughput and low latencies. However, mmWave communications come with high constraints for implementation due to higher free-space losses, poor diffraction, poor signal penetration, among other channel impairments for these high-frequency bands. In this work, a V2X communication channel in the mmWave (28 GHz) band is analyzed by a combination of an empirical study and a deterministic simulation with an in-house 3D ray-launching algorithm. Multiple mmWave V2X links has been modeled for a complex heterogeneous urban scenario in order to capture and analyze different propagation phenomena, providing full volumetric estimation of frequency/power as well as time domain parameters. Large- and small-scale propagation parameters are obtained for a combination of different situations, taking into account the obstruction between the transceivers of vehicles of distinct sizes. These results can aid in the development of modeling techniques for the implementation of mmWave frequency bands in the vehicular context, with the capability of adapting to different scenario requirements in terms of network topology, user density, or transceiver location. The proposed methodology provides accurate wireless channel estimation within the complete volume of the scenario under analysis, considering detailed topological characteristics., Ministerio de Ciencia, Innovación y Universidades, | Ref. RTI2018-095499-B-C31
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Design and Empirical Validation of a LoRaWAN IoT Smart Irrigation System

  • Fraga-Lamas, Paula
  • Celaya-Echarri, Mikel
  • Azpilicueta, Leyre
  • López Iturri, Peio
  • Falcone, Francisco
  • Fernández-Caramés, Tiago M.
[Abstract] In some parts of the world, climate change has led to periods of drought that require managing efficiently the scarce water and energy resources. This paper proposes an IoT smart irrigation system specifically designed for urban areas where remote IoT devices have no direct access to the Internet or to the electrical grid, and where wireless communications are difficult due to the existence of long distances and multiple obstacles. To tackle such issues, this paper proposes a LoRaWAN-based architecture that provides long distance and communications with reduced power consumption. Specifically, the proposed system consists of IoT nodes that collect sensor data and send them to local fog computing nodes or to a remote cloud, which determine an irrigation schedule that considers factors such as the weather forecast or the moist detected by nearby nodes. It is essential to deploy the IoT nodes in locations within the provided coverage range and that guarantee good speed rates and reduced energy consumption. Due to this reason, this paper describes the use of an in-house 3D-ray launching radio-planning tool to determine the best locations for IoT nodes on a real medium-scale scenario (a university campus) that was modeled with precision, including obstacles such as buildings, vegetation, or vehicles. The obtained simulation results were compared with empirical measurements to assess the operating conditions and the radio planning tool accuracy. Thus, it is possible to optimize the wireless network topology and the overall performance of the network in terms of coverage, cost, and energy consumption., This work was funded by Xunta de Galicia (ED431C 2016-045, ED431G/01) and Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE), Project RTI2018-095499-B-C31, Xunta de Galicia; ED431C 2016-045, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Design and Experimental Validation of an Augmented Reality System With Wireless Integration for Context Aware Enhanced Show Experience in Auditoriums

  • Picallo, Imanol
  • Vidal-Balea, Aida
  • Blanco, Óscar
  • López Iturri, Peio
  • Fraga-Lamas, Paula
  • Klaina, Hicham
  • Fernández-Caramés, Tiago M.
  • Azpilicueta, Leyre
  • Falcone, Francisco
[Abstract] The development of multiple cultural and social related activities, such as shows related with the performing arts, conferences or presentations rely on facilities such as auditoriums, theatres and conference sites, which are progressively including multiple technological features in order to enhance user experience. There are still however situations in which user experience is limited owing to lack of environment adaption, such as people with disabilities. In this sense, the adoption of Context Aware paradigms within auditoriums can provide adequate functionalities in order to comply with specific needs. This work is aimed at demonstrating the feasibility in enhancing user experience (e.g., improving the autonomy of disabled people) within auditorium and theatre environments, by means of an Augmented Reality (AR) device (HoloLens smart glasses) with wireless system integration. To carry out the demonstration, different elements to build AR applications are described and tested. First, an intensive measurement campaign was performed in a real auditorium in the city of Pamplona (Baluarte Congress Center) in order to evaluate the feasibility of using Wi-Fi enabled AR devices in a complex wireless propagation scenario. The results show that these environments exhibit high levels of interference, owing to the co-existence and non-coordinated operation of multiple wireless communication systems, such as on site and temporary Wi-Fi access points, wireless microphones or communications systems used by performers, staff and users. Deterministic wireless channel estimation based in volumetric 3D Ray Launching have been obtained for the complete scenario volume, in order to assess quality of service metrics. For illustration purposes, a user-friendly application to help hearing impaired people was developed and its main features were tested in the auditorium. Such an application provides users with a 3D virtual space to visualize useful multimedia content like subtitles or additional information about the show, as well as an integrated call button., 10.13039/501100010801-Article Processing Charges (APC) from the Xunta de Galicia (Grant Number: ED431G 2019/01) 10.13039/501100011033-Agencia Estatal de Investigación of Spain (Grant Number: TEC2016-75067-C4-1-R, RED2018-102668-T and PID2019-104958RB-C42) 10.13039/501100008530-European Regional Development Fund (ERDF) of the European Union (EU) [Agencia Estatal de Investigación (AEI)/Fondo Europeo de Desarrollo Regional (FEDER), UE] 10.13039/100014440-Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE) (Grant Number: RTI2018-095499-B-C31), Xunta de Galicia; ED431G 2019/01
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Design and Empirical Validation of a Bluetooth 5 Fog Computing Based Industrial CPS Architecture for Intelligent Industry 4.0 Shipyard Workshops

  • Fraga-Lamas, Paula
  • López Iturri, Peio
  • Celaya-Echarri, Mikel
  • Blanco, Óscar
  • Azpilicueta, Leyre
  • Varela-Barbeito, José
  • Falcone, Francisco
  • Fernández-Caramés, Tiago M.
[Abstract] Navantia, one of largest European shipbuilders, is creating a fog computing based Industrial Cyber-Physical System (ICPS) for monitoring in real-time its pipe workshops in order to track pipes and keep their traceability. The deployment of the ICPS is a unique industrial challenge in terms of communications, since in a pipe workshop there is a significant number of metallic objects with heterogeneous typologies. There are multiple technologies that can be used to track pipes, but this article focuses on Bluetooth 5, which is a relatively new technology that represents a cost-effective solution to cope with harsh environments, since it has been significantly enhanced in terms of low power consumption, range, speed and broadcasting capacity. Thus, it is proposed a Bluetooth 5 fog computing based ICPS architecture that is designed to support physically-distributed and low-latency Industry 4.0 applications that off-load network traffic and computational resources from the cloud. In order to validate the proposed ICPS design, one of the Navantia’s pipe workshops was modeled through an in-house developed 3D-ray launching radio planning simulator that allows for estimating the coverage provided by the deployed Bluetooth 5 fog computing nodes and Bluetooth 5 tags. The experiments described in this article show that the radio propagation results obtained by the simulation tool are really close to the ones obtained through empirical measurements. As a consequence, the simulation tool is able to reduce ICPS design and deployment time and provide guidelines to future developers when deploying Bluetooth 5 fog computing nodes and tags in complex industrial scenarios., Auto-ID for Intelligent Products research line of the Navantia-UDC Joint Research Unit (Grant Number: IN853B-2018/02) 10.13039/100014440-Ministerio de Ciencia, Innovaci??n y Universidades (Grant Number: RTI2018-095499-B-C31)
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Building Decentralized Fog Computing-Based Smart Parking Systems: From Deterministic Propagation Modeling to Practical Deployment

  • Celaya-Echarri, Mikel
  • Froiz-Míguez, Iván
  • Azpilicueta, Leyre
  • Fraga-Lamas, Paula
  • López Iturri, Peio
  • Falcone, Francisco
  • Fernández-Caramés, Tiago M.
[Abstract] The traditional process of finding a vacant parking slot is often inefficient: it increases driving time, traffic congestion, fuel consumption and exhaust emissions. To address such problems, smart parking systems have been proposed to help drivers to find available parking slots faster using latest sensing and communications technologies. However, the deployment of the communications infrastructure of a smart parking is not straightforward due to multiple factors that may affect wireless propagation. Moreover, a smart parking system needs to provide not only accurate information on available spots, but also fast responses while guaranteeing the system availability even in the case of lacking connectivity. This article describes the development of a decentralized low-latency smart parking system: from its conception, design and theoretical simulation, to its empirical validation. Thus, this work first characterizes a real-world scenario and proposes a fog computing and Internet of Things (IoT) based communications architecture to provide smart parking services. Next, a thorough analysis on the wireless channel properties is carried out by means of an in-house developed deterministic 3D-Ray Launching (3D-RL) tool. The obtained results are validated through a real-world measurement campaign and then the communications architecture is implemented by using ZigBee sensor nodes. The implemented architecture also makes use of Bluetooth Low Energy beacons, an Android app, a decentralized database and fog computing gateways, whose performance is evaluated in terms of response latency and processing rate. Results show that the proposed system is able to deliver information to the drivers fast, with no need for relying on remote servers. As a consequence, the presented development methodology and communications evaluation tool can be useful for future smart parking developers, which can determine the optimal locations of the wireless transceivers during the simulation stage and then deploy a system that can provide fast responses and decentralized services., Xunta de Galicia; ED431G2019/01, Agencia Estatal de Investigación of Spain; TEC2016-75067-C4-1-R, Agencia Estatal de Investigación of Spain; RED2018-102668-T, Agencia Estatal de Investigación of Spain; PID2019-104958RB-C42, Ministerio de Ciencia, Innovación y Universidades; RTI2018-095499-B-C31
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Design, Implementation, and Empirical Validation of an IoT Smart Irrigation System for Fog Computing Applications Based on LoRa and LoRaWAN Sensor Nodes

  • Froiz-Míguez, Iván
  • López Iturri, Peio
  • Fraga-Lamas, Paula
  • Celaya-Echarri, Mikel
  • Blanco, Óscar
  • Azpilicueta, Leyre
  • Falcone, Francisco
  • Fernández-Caramés, Tiago M.
[Absctract]: Climate change is driving new solutions to manage water more efficiently. Such solutions involve the development of smart irrigation systems where Internet of Things (IoT) nodes are deployed throughout large areas. In addition, in the mentioned areas, wireless communications can be difficult due to the presence of obstacles and metallic objects that block electromagnetic wave propagation totally or partially. This article details the development of a smart irrigation system able to cover large urban areas thanks to the use of Low-Power Wide-Area Network (LPWAN) sensor nodes based on LoRa and LoRaWAN. IoT nodes collect soil temperature/moisture and air temperature data, and control water supply autonomously, either by making use of fog computing gateways or by relying on remote commands sent from a cloud. Since the selection of IoT node and gateway locations is essential to have good connectivity and to reduce energy consumption, this article uses an in-house 3D-ray launching radio-planning tool to determine the best locations in real scenarios. Specifically, this paper provides details on the modeling of a university campus, which includes elements like buildings, roads, green areas, or vehicles. In such a scenario, simulations and empirical measurements were performed for two different testbeds: a LoRaWAN testbed that operates at 868 MHz and a testbed based on LoRa with 433 MHz transceivers. All the measurements agree with the simulation results, showing the impact of shadowing effects and material features (e.g., permittivity, conductivity) in the electromagnetic propagation of near-ground and underground LoRaWAN communications. Higher RF power levels are observed for 433 MHz due to the higher transmitted power level and the lower radio propagation losses, and even in the worst gateway location, the received power level is higher than the sensitivity threshold (−148 dBm). Regarding water consumption, the provided estimations indicate that the proposed smart irrigation system is able to reduce roughly 23% of the amount of used water just by considering weather forecasts. The obtained results provide useful guidelines for future smart irrigation developers and show the radio planning tool accuracy, which allows for optimizing the sensor network topology and the overall performance of the network in terms of coverage, cost, and energy consumption., This work has been funded by the Xunta de Galicia (by Grant No. ED431C 2020/15, and Grant No. ED431G 2019/01 to support the Centro de Investigación de Galicia “CITIC”), the Agencia Estatal de Investigación of Spain (by grants RTI2018-095499-B-C31, TEC2016-75067-C4-1-R, RED2018-102668-T, and PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia 2014-2020 and AEI/FEDER Programs, UE)., Xunta de Galicia; ED431C 2020/15, Xunta de Galicia; ED431G 2019/01
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Deterministic wireless channel characterization towards the integration of communication capabilities to enable context aware industrial internet of thing environments

  • Picallo Guembe, Imanol
  • Iturri López, Peio
  • Celaya Echarri, Mikel
  • Azpilicueta Fernández de las Heras, Leyre
  • Falcone Lanas, Francisco
In order to provide interactive capabilities within the context of Internet of Thing (IoT) applications, wireless communication systems play a key role, owing to in-herent mobility, ubiquity and ease of deployment. However, to comply with Quality of Service (QoS) and Quality of Experience (QoE) metrics, coverage/capacity analysis must be performed, to account for the impact of signal blockage as well as multiple interference sources. This analysis is especially complex in the case of indoor scenarios, such as those derived from Industrial Internet of Things (IIoT). In this work, a fully volumetric approach based on hybrid deterministic 3D Ray Launching is employed providing precise wireless channel characterization and hence, system level analysis of indoor scenarios. Coverage/capacity, interference mapping and time domain characterization estimations will be derived, considering different frequencies of operation below 6 GHz. The proposed methodology will be tested against a real measurement scenario, providing full flexibility and scalability for adoption in a wide range of IIoT capable environments., Open Access funding provided by Universidad Pública de Navarra. This work was supported by the European Union’s Horizon 2020 research and Innovation programme under grant agreement N°774094 (Stardust-Holistic and Integrated Urban Model for Smart Cities) and by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional -FEDER-, European Union) under the research grant RTI2018-095499-B-C31 IoTrain.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Impedance bandwidth improvement of a planar antenna based on metamaterial-inspired T-matching network

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Shukla, Panchamkumar
  • Wang, Yan
  • Azpilicueta Fernández de las Heras, Leyre
  • Naser Moghadasi, Mohammad
  • See, Chan H.
  • Elfergani, Issa
  • Zebiri, Chemseddine
  • Abd-Alhameed, Raed
  • Huynen, Isabelle
  • Rodriguez, Jonathan
  • Denidni, Tayeb A.
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
In this paper a metamaterial-inspired T-matching network is directly imbedded inside the feedline of a microstrip antenna to realize optimum power transfer between the front-end of an RF Wireless transceiver and the antenna. The proposed T-matching network, which is composed of an arrangement of series capacitor, shunt inductor, series capacitor, exhibits left-handed metamaterial characteristics. The matching network is first theoretically modelled to gain insight of its limitations. It was then implemented directly in the 50-Ω feedline to a standard circular patch antenna, which is an unconventional methodology. The antenna’s performance was verified through measurements. With the proposed technique there is 2.7 dBi improvement in the antenna’s radiation gain and 12% increase in the efficiency at the center frequency,and this is achieved over a significantly wider frequency range by a factor of approximately twenty. Moreover, there is good correlation between the theoretical model, method of moments simulation, and the measurement results., This work was supported in part by the Ministerio de Ciencia, Innovacion y Universidades, Gobierno de Espana (MCIU/AEI/FEDER,UE), under Grant RTI2018-095499-B-C31, in part by the British Council (UK-China-BRI Countries Education Partnership Initiative 2019), in part by the Innovation Programme under Grant H2020-MSCA-ITN-2016 SECRET-722424, and in part by the U.K. Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Intelligent SDN-based multi-protocol selector for IoT-enabled NMT networks

  • Al-Rahamneh, Anas
  • Astrain Escola, José Javier
  • Iturri López, Peio
  • Picallo Guembe, Imanol
  • Falcone Lanas, Francisco
The popularity of the Internet of Things is increasing and it is being used in many commercial sectors, using customized technologies for specific environments. Applications and protocols, and the unique requirements of each environment, pose a significant challenge for IoT applications, necessitating communication and message exchange support. This paper aims to propose an intelligent SDN-Based multi-protocol selector for IoT-enabled NMT (NonMotorized Transportation) networks. The main goal of this work is to give the mobile nodes within IoT-enabled NMT networks the flexibility to choose the appropriate wireless communication protocol from several protocols they have to transmit information according to criteria, including battery life, data size and priority of the packet, to pass the most important data first., This work was supported by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España, Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional and Unión Europea (MCIU/AEI/FEDER,UE), under Grant RTI2018-095499-B-C31.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Optimum power transfer in RF front end systems using adaptive impedance matching technique

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Azpilicueta Fernández de las Heras, Leyre
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Althuwayb, Ayman Abdulhadi
  • Falcone Lanas, Francisco
  • Huynen, Isabelle
  • Denidni, Tayeb A.
  • Limiti, Ernesto
Matching the antenna’s impedance to the RF-front-end of a wireless communications system is challenging as the impedance varies with its surround environment. Autonomously matching the antenna to the RF-front-end is therefore essential to optimize power transfer and thereby maintain the antenna’s radiation efficiency. This paper presents a theoretical technique for automatically tuning an LC impedance matching network that compensates antenna mismatch presented to the RF-front-end. The proposed technique converges to a matching point without the need of complex mathematical modelling of the system comprising of non-linear control elements. Digital circuitry is used to implement the required matching circuit. Reliable convergence is achieved within the tuning range of the LC-network using control-loops that can independently control the LC impedance. An algorithm based on the proposed technique was used to verify its effectiveness with various antenna loads. Mismatch error of the technique is less than 0.2%. The technique enables speedy convergence (< 5 µs) and is highly accurate for autonomous adaptive antenna matching networks., This work is partially supported by RTI2018-095499-B-C31, Funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE), and innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

3D-ray launching MIMO channel geometric estimation

  • Rodríguez Corbo, Fidel Alejandro
  • Azpilicueta Fernández de las Heras, Leyre
  • Celaya Echarri, Mikel
  • Shubair, Raed M.
  • Falcone Lanas, Francisco
The complete multiple-input–multiple-output (MIMO) channel simulation in deterministic techniques can be a computationally intensive task, due to the inherent scenario’s complexity and number of antennas. The spatial coherence among MIMO elements is a reasonable assumption to approximate the channel from a single point simulation. In this letter, a novel method to incorporate a geometrical approximation of the MIMO channel into a three-dimensional ray launching (3D-RL) algorithm is presented. The method is antenna type independent and the orientation of the array is embedded in the antenna representation. Relevant information of the MIMO channel characteristics like the root mean square (rms) delay spread, the maximum delay spread, phase and channel capacity are obtained and compared with the full 3D-RL simulation of the entire MIMO array, achieving 93.4% reduction in computational time., This work was supported by Project RTI2018-095499-B-C31 and funded by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Wireless characterization and assessment of an UWB-Based system in industrial environments

  • Picallo Guembe, Imanol
  • Iturri López, Peio
  • Klaina, Hicham
  • Glaría Ezker, Guillermo
  • Sáez de Jáuregui Urdanoz, Félix
  • Zabalza Cestau, José Luis
  • Azpilicueta Fernández de las Heras, Leyre
  • Falcone Lanas, Francisco
The advent of Indsutrial Internet of Things is one of the main drivers for the implementation of Industry 4.0 scenarios and applications, in which wireless communication systems play a key role in terms of flexibility, mobility and deployment capabilities. However, the integration of wireless communication systems poses challenges, owing to variable path loss conditions and interference impact. In this work, an Ultra-Wideband (UWB) system for indoor location in very large, complex industrial scenarios is presented. Precise wireless channel characterization for the complete volume of a logistical plant is performed, based on 3D hybrid ray launching approximation, in order to aid network node design process. Wireless characterization, implementation and measurement results are obtained for both 4 GHz and 6 GHz frequency bands, considering different densities of scatterers within the scenario under test. Time domain estimation results have been obtained and compared with time of flight measurement results, showing good agreement. The proposed methodology enables to perform system design and performance tasks, analyzing the impact of variable object density conditions in wireless channel response, providing accurate time of flight estimations without the need of complex channel sounder systems, aiding in optimal system planning and implementation., This work was supported in part by the European Union’s Horizon 2020 Research and Innovation Programme (Stardust-Holistic and Integrated Urban Model for Smart Cities) under Grant 774094, in part by the Ministerio de Ciencia through the Innovación y Universidades, Gobierno de España (Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional—FEDER, European Union) under Grant RTI2018-095499-B-C31 IoTrain, and in part by the Gobierno de Navarra-Departamento de Desarrollo Económico under Grant 0011-1365-2019-000097 OEE LOG.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Empirical and modeling approach for environmental indoor RF-EMF assessment in complex high-node density scenarios: public shopping malls case study

  • Celaya Echarri, Mikel
  • Azpilicueta Fernández de las Heras, Leyre
  • Ramos, Victoria
  • Iturri López, Peio
  • Falcone Lanas, Francisco
This work provides an intensive and comprehensive in-depth study from an empirical and modeling approach of the environmental radiofrequency electromagnetic fields (RF-EMF) radiation exposure in public shopping malls, as an example of an indoor high-node user density context aware environment, where multiple wireless communication systems coexist. For that purpose, current personal mobile communications (2G-5G FR 1) as well as Wi-Fi services (IEEE 802.11n/ac) have been precisely analyzed in order to provide clear RF-EMF assessment insight and to verify compliance with established regulation limits. In this sense, a complete measurements campaign has been performed in different countries, with frequency-selective exposimeters (PEMs), providing real empirical datasets for statistical analysis and allowing discussion and comparison regarding current health effects and safety issues between some of the most common RF-EMF exposure safety standards: ICNIRP 2020 (Spain), IEEE 2019 (Mexico) and a more restrictive regulation (Poland). In addition, environmental RF-EMF exposure assessment simulation results, in terms of spatial E-field characterization and Cumulative Distribution Function (CDF) probabilities, have been provided for challenging incremental high-node user dense scenarios in worst case conditions, by means of a deterministic in-house 3D Ray-Launching (3D-RL) RF-EMF safety simulation technique, showing good agreement with the experimental measurements. Finally, discussion highlighting the contribution and effects of the coexistence of multiple heterogenous networks and services for the environmental RF-EMF radiation exposure assessment has been included, showing that for all measured results and simulated cases, the obtained E-Field levels are well below the exposure limits established in the internationally accepted standards and guidelines. In consequence, the obtained results and the presented methodology could become a starting point to stablish the RF-EMF assessment basis of future complex heterogeneous 5G FR 2 developments on the millimeter wave (mmWave) frequency range, where massive high-node user density networks are expected.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

High-isolation antenna array using SIW and realized with a graphene layer for sub-terahertz wireless applications

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Salekzamankhani, Shahram
  • Aïssa, Sonia
  • See, Chan H.
  • Soin, Navneet
  • Fishlock, Sam J.
  • Althuwayb, Ayman Abdulhadi
  • Abd-Alhameed, Raed
  • Huynen, Isabelle
  • McLaughlin, James A.
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
This paper presents the results of a study on developing an effective technique to increase the performance characteristics of antenna arrays for sub-THz integrated circuit applications. This is essential to compensate the limited power available from sub-THz sources. Although conventional array structures can provide a solution to enhance the radiation-gain performance however in the case of small-sized array structures the radiation properties can be adversely affected by mutual coupling that exists between the radiating elements. It is demonstrated here the effectiveness of using SIW technology to suppress surface wave propagations and near field mutual coupling effects. Prototype of 2x3 antenna arrays were designed and constructed on a polyimide dielectric substrate with thickness of 125 mu m for operation across 0.19-0.20 THz. The dimensions of the array were 20x13.5x0.125 mm(3). Metallization of the antenna was coated with 500 nm layer of Graphene. With the proposed technique the isolation between the radiating elements was improved on average by 22.5 dB compared to a reference array antenna with no SIW isolation. The performance of the array was enhanced by transforming the patch to exhibit metamaterial characteristics. This was achieved by embedding the patch antennas in the array with sub-wavelength slots. Compared to the reference array the metamaterial inspired structure exhibits improvement in isolation, radiation gain and efficiency on average by 28 dB, 6.3 dBi, and 34%, respectively. These results show the viability of proposed approach in developing antenna arrays for application in sub-THz integrated circuits., This work was supported in part by the Ministerio de Ciencia, Innovacion y Universidades, Gobierno de Espana (MCIU/AEI/FEDER, UE) under Grant RTI2018-095499-B-C31, in part by the Innovation Programme under Grant H2020-MSCA-ITN-2016 SECRET-722424, and in part by the U.K. Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

VTOL UAV digital twin for take-off, hovering and landing in different wind conditions

  • Aláez Gómez, Daniel
  • Olaz Moratinos, Xabier
  • Prieto Míguez, Manuel
  • Villadangos Alonso, Jesús
  • Astrain Escola, José Javier
With UAVs becoming increasingly popular in the industry, vertical take-off and landing (VTOL) convertiplanes are emerging as a compromise between the advantages of planes and multicopters. Due to their large wing surface area, VTOL convertiplanes are subject to a strong wind dependence on critical phases such as take-off, landing, and hovering. Developing a new and improved unmanned aerial vehicle (UAV) is often expensive and associated with failures and accidents. This paper proposes the dynamic characterization of a commercial VTOL convertiplane UAV in copter mode and provides a novel method to estimate the aerodynamic forces and moments for any possible wind speed and direction. Starting from Euler’s equations of rigid body dynamics, we have derived the mathematical formulation to precisely consider aerodynamic forces and moments caused by any wind speed and direction. This unique approach will allow for VTOL convertiplane UAVs to be trained and tested digitally in takeoff, hovering, and landing maneuvers without the cost and hassle of physical testing, and the dependence on existing wind conditions. A digital twin of a VTOL convertiplane UAV in copter mode has been modeled and tested in the Gazebo robotics simulator. Take-off, hovering and landing maneuvers have been compared with and without the wind physics model. Finally, the simulator has been tested against real flight conditions (reproducing the mean wind speed and direction only), showing a natural and realistic behavior., This work has been supported in part by the Ministerio de Ciencia e Innovación (Spain) under the research grant RTI2018-095499-B-C31 IoTrain; in part by Agencia Estatal de Investigación (AEI) and European Union NextGenerationEU/PRTR PLEC2021-007997: Holistic power lines predictive maintenance system; and in part by the Government of Navarre (Departamento de Desarrollo Económico) under the research grants 0011-1411-2021-000021 EMERAL: Emergency UAVs for long range operations, 0011-1365-2020-000078 DIVA, and 0011-1411-2021-000025 MOSIC: Plataforma logística de largo alcance, eléctrica y conectada.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Basketball player on-body biophysical and environmental parameter monitoring based on wireless sensor network integration

  • Picallo Guembe, Imanol
  • Iturri López, Peio
  • Astrain Escola, José Javier
  • Aguirre Gallego, Erik
  • Azpilicueta Fernández de las Heras, Leyre
  • Celaya Echarri, Mikel
  • Villadangos Alonso, Jesús
  • Falcone Lanas, Francisco
Sport activities have benefited in recent years from the progressive adoption of different technological assets in order to improve individual as well as group training, collect different statistics or enhance the spectator experiences. The progressive adoption of Internet of Things paradigms can also be considered within the scope of sport activities, providing high levels of user interactivity as well as enabling cloud-based data storage and processing. In this work, a system for monitoring biophysical, kinematic and environmental parameters within the development of basketball training is presented. A set of on-body nodes with multiple sensors and wireless body area network capabilities have been designed, implemented and tested under real training conditions during a match. Wireless channel analysis results have been obtained with the aid of in house implemented deterministic 3D ray launching algorithm, providing accurate coverage/capacity estimations in relation with human body consideration in the field as well as in the stadium. Measurement results give relevant information in relation with individual player characteristics as well as with team characteristics, providing a flexible tool to improve training development of basketball., This work was supported in part by the Ministerio de Ciencia, Innovación y Universidades, Spain, (MCIU)/Agencia Estatal de Investigación (AEI)/Fondo Europeo de Desarrollo Regional (FEDER)/European Union under Grant RTI2018-095499-B-C31 (IoTrain), and in part by the European Union's Horizon 2020 Research and Innovation Program (Stardust-Holistic and Integrated Urban Model for Smart Cities) under Grant 774094.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

IoT-based COVID-19 diagnosing and monitoring systems: a survey

  • Anjum, Nasreen
  • Alibakhshikenari, Mohammad
  • Rashid, Junaid
  • Jabeen, Fouzia
  • Asif, Amna
  • Mohamed, Ehab Mahmoud
  • Falcone Lanas, Francisco
To date, the novel Coronavirus (SARS-CoV-2) has infected millions and has caused the deaths of thousands of people around the world. At the moment, five antibodies, two from China, two from the U.S., and one from the UK, have already been widely utilized and numerous vaccines are under the trail process. In order to reach herd immunity, around 70% of the population would need to be inoculated. It may take several years to hinder the spread of SARS-CoV-2. Governments and concerned authorities have taken stringent measurements such as enforcing partial, complete, or smart lockdowns, building temporary medical facilities, advocating social distancing, and mandating masks in public as well as setting up awareness campaigns. Furthermore, there have been massive efforts in various research areas and a wide variety of tools, technologies and techniques have been explored and developed to combat the war against this pandemic. Interestingly, machine learning (ML) algorithms and internet of Things (IoTs) technology are the pioneers in this race. Up till now, several real-time and intelligent IoT-based COVID-19 diagnosing, and monitoring systems have been proposed to tackle the pandemic. In this article we have analyzed a wide range of IoTs technologies which can be used in diagnosing and monitoring the infected individuals and hotspot areas. Furthermore, we identify the challenges and also provide our vision about the future research on COVID-19., Dr. Mohammad Alibakhshikenari acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538. Additionally, this work was supported by Project RTI2018-095499-B-C31, funded by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Metamaterial-inspired antenna array for application in microwave breast imaging systems for tumor detection

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Shukla, Panchamkumar
  • Ojaroudi Parchin, Naser
  • Azpilicueta Fernández de las Heras, Leyre
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Falcone Lanas, Francisco
  • Huynen, Isabelle
  • Denidni, Tayeb A.
  • Limiti, Ernesto
This paper presents a study of a planar antenna-array inspired by the metamaterial concept where the resonant elements have sub-wavelength dimensions for application in microwave medical imaging systems for detecting tumors in biological tissues. The proposed antenna consists of square-shaped concentric-rings which are connected to a central patch through a common feedline. The array structure comprises several antennas that are arranged to surround the sample breast model. One antenna at a time in the array is used in transmission-mode while others are in receive-mode. The antenna array operates over 2-12 GHz amply covering the frequency range of existing microwave imaging systems. Measured results show that compared to a standard patch antenna array the proposed array with identical dimensions exhibits an average radiation gain and efficiency improvement of 4.8 dBi and 18%, respectively. The average refiection-coefficient of the array over its operating range is better than S11 = -20 dB making it highly receptive to weak signals and minimizing the distortion encountered with the transmission of short duration pulse-trains. Moreover, the proposed antenna-array exhibits high-isolation on average of 30dB between radiators. This means that antennas in the array (i) can be closely spaced to accommodate more radiators to achieve higher-resolution imaging scans, and (ii) the imagining scans can be done over a wider frequency range to ascertain better contrast in electrical parameters between malignant tumor-tissue and the surrounding normal breast-tissue to facilitate the detection of breast-tumor. It is found that short wavelength gives better resolution. In this experimental study a standard biomedical breast model that mimics a real-human breast in terms of dielectric and optical properties was used to demonstrate the viability of the proposed antenna over a standard patch antenna in the detection and the localization of tumor. These results are encouraging for clinical trials and further refinement of the antenna-array., This work was partially supported by RTI2018-095499-B-C31, funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE), and Innovation Programme under Grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the U.K. Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Building decentralized fog computing-based smart parking systems: from deterministic propagation modeling to practical deployment

  • Celaya Echarri, Mikel
  • Froiz Míguez, Iván
  • Azpilicueta Fernández de las Heras, Leyre
  • Iturri López, Peio
  • Falcone Lanas, Francisco
The traditional process of finding a vacant parking slot is often inefficient: it increases driving time, traffic congestion, fuel consumption and exhaust emissions. To address such problems, smart parking systems have been proposed to help drivers to find available parking slots faster using latest sensing and communications technologies. However, the deployment of the communications infrastructure of a smart parking is not straightforward due to multiple factors that may affect wireless propagation. Moreover, a smart parking system needs to provide not only accurate information on available spots, but also fast responses while guaranteeing the system availability even in the case of lacking connectivity. This article describes the development of a decentralized low-latency smart parking system: from its conception, design and theoretical simulation, to its empirical validation. Thus, this work first characterizes a real-world scenario and proposes a fog computing and Internet of Things (IoT) based communications architecture to provide smart parking services. Next, a thorough analysis on the wireless channel properties is carried out by means of an in-house developed deterministic 3D-Ray Launching (3D-RL) tool. The obtained results are validated through a real-world measurement campaign and then the communications architecture is implemented by using ZigBee sensor nodes. The implemented architecture also makes use of Bluetooth Low Energy beacons, an Android app, a decentralized database and fog computing gateways, whose performance is evaluated in terms of response latency and processing rate. Results show that the proposed system is able to deliver information to the drivers fast, with no need for relying on remote servers. As a consequence, the presented development methodology and communications evaluation tool can be useful for future smart parking developers, which can determine the optimal locations of the wireless transceivers during the simulation stage and then deploy a system that can provide fast responses and decentralized services., This work was supported in part by the School of Engineering and Sciences, Tecnológico de Monterrey, in part by the Xunta de Galicia under Grant ED431G2019/01, in part by the Agencia Estatal de Investigación of Spain under Grant TEC2016-75067-C4-1-R, Grant RED2018-102668-T, and Grant PID2019-104958RB-C42, in part by the European Regional Development Fund (ERDF) funds of the European Union (EU) (AEI/FEDER, UE), and in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCI-U/AEI/FEDER,UE) under Grant RTI2018-095499-B-C31.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Patient tracking in a multi-building, tunnel-connected hospital complex

  • Trigo Vilaseca, Jesús Daniel
  • Klaina, Hicham
  • Picallo Guembe, Imanol
  • Iturri López, Peio
  • Astrain Escola, José Javier
  • Falcone Lanas, Francisco
  • Serrano Arriezu, Luis Javier
Patients admitted to Intensive Care Units (ICU) are transported from and to other units. Knowing their location is strategic for a sound planning of intra-hospital transports as well as resources management. This is even more crucial in big hospital complexes, comprised of several buildings often connected through tunnels. In this work, a patient tracking application in a multi-building, tunnel-connected hospital complex (the Hospital Complex of Navarre) is presented. The system leverages Internet of Medical Things (IoMT) communication technologies, such as Long Range Wide-Area Network (LoRaWAN) and Near Field Communication (NFC). The locations of the LoRaWAN nodes were selected based on several factors, including the situation of the tunnels, buildings services and medical equipment and a literature review on intra-hospital ICU patients' trips. The possible locations of the LoRaWAN gateways were selected based on 3D Ray Launching Simulations, in order to obtain accurate characterization. Once the locations were set, a LoRaWAN radio coverage studio was performed. The main conclusion drawn is that just one LoRaWAN gateway would be enough to cover all overground LoRaWAN nodes deployed. A second one would be required for underground coverage. In addition, a remote, private cloud infrastructure together with a mobile application was created to manage the information generated. On-field tests were performed to assess the technical feasibility of the system. The application provides with on-demand ICU patients' movement flow around the complex. Although designed for the ICU-admitted patients' context, the system could be easily extrapolated to other use cases., This work was supported in part by the Project 'Arquitectura 'Internet of Medical Things' (IoMT) para la monitorización y gestión semántica de datos relativos a enfermedades cardiovasculares' funded by the Universidad Pública de Navarra under Grant PJUPNA29, in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE) under Project TEC2017-85529-C03-3R and Project RTI2018-095499-B-C31, and in part by the European Union's Horizon 2020 Research and Innovation Programme (Stardust-Holistic and Integrated Urban Model for Smart Cities) under Agreement N. 774094.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

A metasurface-based single-layered compact AMC-backed dual-band antenna for off-body IoT devices

  • Ahmad, Sarosh
  • Paracha, Kashif Nisar
  • Sheikh, Yawar Ali
  • Ghaffar, Adnan
  • Butt, Arslan Dawood
  • Alibakhshikenari, Mohammad
  • Soh, Ping Jack
  • Khan, Salahuddin
  • Falcone Lanas, Francisco
In this article, a compact printed monopole dual-band antenna using artificial magnetic conductor (AMC)-plane with improved gain and broader bandwidth, applicable for off-body internet of things (IoT) devices is presented. The monopole antenna consists of two C-shaped resonators connected through a U-shaped monopole, parasitic elements, discrete ground circular rings and a co-planar waveguide (CPW) feedline. Each artificial magnetic conductor (AMC) unit cell consists of a slotted circular and a square stubs, designed with two zero-crossing phases for improving the radiation characteristics and to achieve the high gain. The overall size of the proposed AMC-backed antenna is 44.4 mm ×44.4 mm ×1.6 mm with electrical dimensions of 0.75λ g × 0.75λ g× 0.027λ g. This AMC-backed antenna featured measured bandwidths of 9.6% and 12.4% with improved measured gain values of 4.88 dB and 4.73 dB at 2.45 GHz and 5.8 GHz, respectively. The specific absorption rate (SAR) values are analysed and found to be 1.58 W/kg at 2.45 GHz and 0.9 W/kg at 5.8 GHz. Therefore, the proposed AMC-backed antenna is useful for off-body IoT devices operating at 2.45 and 5.8 GHz industrial, scientific, and medical (ISM) band applications., This work was supported in part by the Universidad Carlos III de Madrid; in part by the European Union’s Horizon 2020 Research and Innovation Programme under Marie Sklodowska-Curie Grant 801538; in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER and UE) under Grant RTI2018-095499-B-C31; and in part by the Researchers Supporting Project, King Saud University, Riyadh, Saudi Arabia, under Project number RSP-2021/58.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Deterministic 3D ray-launching millimeter wave channel characterization for vehicular communications in urban environments

  • Rodríguez Corbo, Fidel Alejandro
  • Azpilicueta Fernández de las Heras, Leyre
  • Iturri López, Peio
  • Picallo Guembe, Imanol
  • Falcone Lanas, Francisco
The increasing demand for more sensors inside vehicles pursues the intention of making vehicles more 'intelligent'. In this context, the vision of fully connected and autonomous cars is becoming more tangible and will turn into a reality in the coming years. The use of these intelligent transport systems will allow the integration of efficient performance in terms of route control, fuel consumption, and traffic administration, among others. Future vehicle-to-everything (V2X) communication will require a wider bandwidth as well as lower latencies than current technologies can offer, to support high-constraint safety applications and data exhaustive information exchanges. To this end, recent investigations have proposed the adoption of the millimeter wave (mmWave) bands to achieve high throughput and low latencies. However, mmWave communications come with high constraints for implementation due to higher free-space losses, poor diffraction, poor signal penetration, among other channel impairments for these high-frequency bands. In this work, a V2X communication channel in the mmWave (28 GHz) band is analyzed by a combination of an empirical study and a deterministic simulation with an in-house 3D ray-launching algorithm. Multiple mmWave V2X links has been modeled for a complex heterogeneous urban scenario in order to capture and analyze different propagation phenomena, providing full volumetric estimation of frequency/power as well as time domain parameters. Large-and small-scale propagation parameters are obtained for a combination of different situations, taking into account the obstruction between the transceivers of vehicles of distinct sizes. These results can aid in the development of modeling techniques for the implementation of mmWave frequency bands in the vehicular context, with the capability of adapting to different scenario requirements in terms of network topology, user density, or transceiver location. The proposed methodology provides accurate wireless channel estimation within the complete volume of the scenario under analysis, considering detailed topological characteristics., Project RTI2018-095499-B-C31, funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Metasurface-based wideband MIMO antenna for 5G millimeter-wave systems

  • Sehrai, Daniyal Ali
  • Asif, Muhammad
  • Shah, Wahab Ali
  • Khan, Jalal
  • Ullah, Ibrar
  • Ibrar, Muhammad
  • Jan, Saeedullah
  • Alibakhshikenari, Mohammad
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
This paper presents a metasurface based multiple-input multiple-output (MIMO) antenna with a wideband operation for millimeter-wave 5G communication systems. The antenna system consists of four elements placed with a 90 degree shift in order to achieve a compact MIMO system while a 2× 2 non-uniform metasurface (total four elements) is placed at the back of the MIMO configuration to improve the radiation characteristics of it. The overall size of the MIMO antenna is 24× 24 mm2 while the operational bandwidth of the proposed antenna system ranges from 23.5-29.4 GHz. The peak gain achieved by the proposed MIMO antenna is almost 7dB which is further improved up to 10.44 dB by employing a 2× 2 metasurface. The total efficiency is also observed more than 80% across the operating band. Apart from this, the MIMO performance metrics such as envelope correlation coefficient (ECC), diversity gain (DG), and channel capacity loss (CCL) are analyzed which demonstrate good characteristics. All the simulations of the proposed design are carried out in computer simulation technology (CST) software, and measured results reveal good agreement with the simulated one which make it a potential contender for the upcoming 5G communication systems., This work was supported in part by the Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant Agreement No 801538, and in part by the the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE) under Grant RTI2018-095499-B-C31
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Analysis of low power wide area network wireless technologies in smart agriculture for large-scale farm monitoring and tractor communications

  • Klaina, Hicham
  • Picallo Guembe, Imanol
  • Iturri López, Peio
  • Campo-Bescós, Miguel
  • Azpilicueta Fernández de las Heras, Leyre
  • Aghzout, Otman
  • Falcone Lanas, Francisco
In this paper, the assessment of multiple scenario cases for large-scale farm monitoring using Low-Power Wide-Area Network (LPWAN) based near-ground sensor nodes with the interaction of both tractors and farmers are presented. The proposed scenario under analysis considers multiple communication links, namely nodes to infrastructure, nodes to tractor, nodes to farmer, tractor to infrastructure and farmer to infrastructure communications. Moreover, these scenarios are proposed for tractors and agricultural equipment performance improvement and tracking, as well as resources management within the farm field. Different link type configurations are tested in order to consider the impact of ground, spatial distribution as well as infrastructure elements. The results show that LPWAN-based WSNs can provide better performance in terms of coverage and radio link quality results than ZigBee for a non-flat large-scale farm field in both cases of near-ground fixed nodes and moving tractor and farmer. The proposed systems are validated by cloud-based platforms for LoRaWAN, Sigfox and NB-IoT communications, providing flexible and scalable solutions to enable interactive farming applications., This research is supported by the 2017 Predoctoral Research Grant supported by the Xunta de Galicia and the research projects TEC2017-85529-C03-3R and RTI2018-095499-B-C31, funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU, AEI, FEDER, UE), as well as from European Union's Horizon 2020 research and Innovation programme under grant agreement N°774094 (Stardust-Holistic and Integrated Urban Model for Smart Cities).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

An analytic representation of the second symmetric standard elliptic integral in terms of elementary functions

  • Bujanda Cirauqui, Blanca
  • López García, José Luis
  • Pagola Martínez, Pedro Jesús
  • Palacios Herrero, Pablo
We derive new convergent expansions of the symmetric standard elliptic integral RD(x,y,z), for x,y,z∈C∖(−∞,0], in terms of elementary functions. The expansions hold uniformly for large and small values of one of the three variables x, y or z (with the other two fixed). We proceed by considering a more general parametric integral from which RD(x,y,z) is a particular case. It turns out that this parametric integral is an integral representation of the Appell function F1(a;b,c;a+1;x,y). Therefore, as a byproduct, we deduce convergent expansions of F1(a;b,c;a+1;x,y). We also compute error bounds at any order of the approximation. Some numerical examples show the accuracy of the expansions and their uniform features., Open Access funding provided by Universidad Pública de Navarra. This work was supported by the research grant RTI2018-095499-B-C31 Io Train and Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

A frequency reconfigurable compact planar inverted-F antenna for portable devices

  • Ghaffar, Adnan
  • Altaf, Ahsan
  • Aneja, Aayush
  • Li, Xue Jun
  • Khan, Salahuddin
  • Alibakhshikenari, Mohammad
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
In this paper, a low-profile, compact size, inexpensive, and easily integrable frequency reconfigurable antenna system is proposed. The proposed antenna consists of an inverted-F shape antenna, capacitors, and switching PIN diodes. The designed antenna element is fabricated on easy available and less expensive FR-4 substrate ( εr  = 4.4, tan δ  = 0.02). The switching diodes are incorporated within the radiating structure of the antenna design, and by changing the different states of PIN diodes, frequency reconfigurable response is achieved. While adjusting the different states of the diodes, the antenna resonates between 0.841 GHz and 2.12 GHz and covers six different frequency bands. The proposed system has compact size of . The gain of the antenna is between 1.89 and 2.12 dBi. The measurement results shows the good agreement with simulated results for different key performance parameters. Additionally, the proposed antenna shows omni-directional far-field characteristics for various different frequencies., This study received funding from Universidad Carlos III de Madrid and the European Union's Horizon 2020 Research and Innovation Programme under Marie Sklodowska-Curie grant 801538. This study was also partially supported by Ministerio de Ciencia, Innovacion y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE) (RTI2018-095499-B-C31). Additionally, the authors sincerely appreciate funding from Researchers Supporting Project (RSP2021/58), King Saud University, Riyadh, Saudi Arabia.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Study on on-chip antenna design based on metamaterial-inspired and substrate-integrated waveguide properties for millimetre-wave and THz integrated-circuit applications

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Althuwayb, Ayman Abdulhadi
  • Aïssa, Sonia
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
This paper presents the results of a study on improving the performance parameters such as the impedance bandwidth, radiation gain and efficiency, as well as suppressing substrate loss of an innovative antenna for on-chip implementation for millimetre-wave and terahertz integrated-circuits. This was achieved by using the metamaterial and the substrate-integrated waveguide (SIW) technologies. The on-chip antenna structure comprises five alternating layers of metallization and silicon. An array of circular radiation patches with metamaterial-inspired crossed-shaped slots are etched on the top metallization layer below which is a silicon layer whose bottom surface is metalized to create a ground plane. Implemented in the silicon layer below is a cavity above which is no ground plane. Underneath this silicon layer is where an open-ended microstrip feedline is located which is used to excite the antenna. The feed mechanism is based on the coupling of the electromagnetic energy from the bottom silicon layer to the top circular patches through the cavity. To suppress surface waves and reduce substrate loss, the SIW concept is applied at the top silicon layer by implementing the metallic via holes at the periphery of the structure that connect the top layer to the ground plane. The proposed on-chip antenna has an average measured radiation gain and efficiency of 6.9 dBi and 53%, respectively, over its operational frequency range from 0.285–0.325 THz. The proposed on-chip antenna has dimensions of 1.35 × 1 × 0.06 mm3. The antenna is shown to be viable for applications in millimetre-waves and terahertz integrated-circuits. © 2020, The Author(s)., Open access funding provided by Università degli Studi di Roma Tor Vergata within the CRUI-CARE Agreement. This work is partially supported by RTI2018-095499-B-C31, Funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE), innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Miniaturization trends in substrate integrated waveguide (SIW) filters: a review

  • Iqbal, Amjad
  • Tiang, Jun Jiat
  • Wong, Sew Kin
  • Alibakhshikenari, Mohammad
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
This review provides an overview of the technological advancements and miniaturization trends in Substrate Integrated Waveguide (SIW) filters. SIW is an emerging planar waveguide structure for the transmission of electromagnetic (EM) waves. SIW structure consists of two parallel copper plates which are connected by a series of vias or continuous perfect electric conductor (PEC) channels. SIW is a suitable choice for designing and developing the microwave and millimetre-wave (mm-Wave) radio frequency (RF) components: because it has compact dimensions, low insertion loss, high-quality factor (QF), and can easily integrate with planar RF components. SIW technology enjoys the advantages of the classical bulky waveguides in a planar structure; thus is a promising choice for microwave and mm-Wave RF components. © 2013 IEEE., This work was supported by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España under Grant RTI2018-095499-B-C31.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Towards environmental RF-EMF assessment of mmwave high-node density complex heterogeneous environments

  • Celaya Echarri, Mikel
  • Azpilicueta Fernández de las Heras, Leyre
  • Rodríguez Corbo, Fidel Alejandro
  • Iturri López, Peio
  • Ramos González, Victoria
  • Alibakhshikenari, Mohammad
  • Shubair, Raed M.
  • Falcone Lanas, Francisco
The densification of multiple wireless communication systems that coexist nowadays, as well as the 5G new generation cellular systems advent towards the millimeter wave (mmWave) frequency range, give rise to complex context-aware scenarios with high-node density heterogeneous networks. In this work, a radiofrequency electromagnetic field (RF-EMF) exposure assessment from an empirical and modeling approach for a large, complex indoor setting with high node density and traffic is presented. For that purpose, an intensive and comprehensive in-depth RF-EMF E-field characterization study is provided in a public library study case, considering dense personal mobile communications (5G FR2 @28 GHz) and wireless 802.11ay (@60 GHz) data access services on the mmWave frequency range. By means of an enhanced in-house deterministic 3D ray launching (3D-RL) simulation tool for RF-EMF exposure assessment, different complex heterogenous scenarios of high complexity are assessed in realistic operation conditions, considering different user distributions and densities. The use of directive antennas and MIMO beamforming techniques, as well as all the corresponding features in terms of radio wave propagation, such as the body shielding effect, dispersive material properties of obstacles, the impact of the distribution of scatterers and the associated electromagnetic propagation phenomena, are considered for simulation. Discussion regarding the contribution and impact of the coexistence of multiple heterogeneous networks and services is presented, verifying compliance with the current established international regulation limits with exposure levels far below the aforementioned limits. Finally, the proposed simulation technique is validated with a complete empirical campaign of measurements, showing good agreement. In consequence, the obtained datasets and simulation estimations, along with the proposed RF-EMF simulation tool, could be a reference approach for the design, deployment and exposure assessment of the current and future wireless communication technologies on the mmWave spectrum, where massive high-node density heterogeneous networks are expected., Project RTI2018-095499-B-C31 was funded by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE). This project received funding from Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under Marie Sklodowska-Curie Grant 801538.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Design and experimental validation of an augmented reality system with wireless integration for context aware enhanced show experience in auditoriums

  • Picallo Guembe, Imanol
  • Vidal Balea, A.
  • Blanco Novoa, Óscar
  • Iturri López, Peio
  • Fraga Lamas, Paula
  • Azpilicueta Fernández de las Heras, Leyre
  • Falcone Lanas, Francisco
  • Fernández Caramés, Tiago M.
  • Klaina, Hicham
The development of multiple cultural and social related activities, such as shows related with the performing arts, conferences or presentations rely on facilities such as auditoriums, theatres and conference sites, which are progressively including multiple technological features in order to enhance user experience. There are still however situations in which user experience is limited owing to lack of environment adaption, such as people with disabilities. In this sense, the adoption of Context Aware paradigms within auditoriums can provide adequate functionalities in order to comply with specific needs. This work is aimed at demonstrating the feasibility in enhancing user experience (e.g., improving the autonomy of disabled people) within auditorium and theatre environments, by means of an Augmented Reality (AR) device (HoloLens smart glasses) with wireless system integration. To carry out the demonstration, different elements to build AR applications are described and tested. First, an intensive measurement campaign was performed in a real auditorium in the city of Pamplona (Baluarte Congress Center) in order to evaluate the feasibility of using Wi-Fi enabled AR devices in a complex wireless propagation scenario. The results show that these environments exhibit high levels of interference, owing to the co-existence and non-coordinated operation of multiple wireless communication systems, such as on site and temporary Wi-Fi access points, wireless microphones or communications systems used by performers, staff and users. Deterministic wireless channel estimation based in volumetric 3D Ray Launching have been obtained for the complete scenario volume, in order to assess quality of service metrics. For illustration purposes, a user-friendly application to help hearing impaired people was developed and its main features were tested in the auditorium. Such an application provides users with a 3D virtual space to visualize useful multimedia content like subtitles or additional information about the show, as well as an integrated call button. © 2013 IEEE., This work was supported in part by the Article Processing Charges (APC) from the Xunta de Galicia under Grant ED431G 2019/01; in part by the Agencia Estatal de Investigación of Spain under Grant TEC2016-75067-C4-1-R, Grant RED2018-102668-T, and Grant PID2019-104958RB-C42; in part by the European Regional Development Fund (ERDF) of the European Union (EU) [Agencia Estatal de Investigación (AEI)/Fondo Europeo de Desarrollo Regional (FEDER), UE]; and in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE) under Project RTI2018-095499-B-C31.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Multimode HMSIW-based bandpass filter with improved selectivity for fifth-generation (5G) RF front-ends

  • Iqbal, Amjad
  • Tiang, Jun Jiat
  • Wong, Sew Kin
  • Alibakhshikenari, Mohammad
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
This article presents the detailed theoretical, simulation, and experimental analysis of a half-mode substrate integrated waveguide (HMSIW)-based multimode wideband filter. A third-order, semicircular HMSIW filter is developed in this paper. A semicircular HMSIW cavity resonator is adopted to achieve wide band characteristics. A U-shaped slot (acts as a lambda/4 stub) in the center of a semicircular HMSIW cavity resonator and L-shaped open-circuited stubs are used to improve the out-of-band response by generating multiple transmission zeros (TZs) in the stop-band region of the filter. The TZs on either side of the passband can be controlled by adjusting dimensions of a U-shaped slot and L-shaped open-circuited stubs. The proposed filter covers a wide fractional bandwidth, has a lower insertion loss value, and has multiple TZs (which improves the selectivity). The simulated response of filter agrees well with the measured data. The proposed HMSIW bandpass filter can be integrated with any planar wideband communication system circuit, thanks to its planar structure., This work is partially supported by RTI2018-095499-B-C31, funded by Ministerio de Ciencia, Innovacion y Universidades, Gobierno de Espana (MCIU/AEI/FEDER, UE).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Future smartphone: MIMO antenna system for 5G mobile terminals

  • Abdullah, Mujeeb
  • Altaf, Ahsan
  • Anjum, Muhammad Rizwan
  • Arain, Zulfiqar Ali
  • Jamali, Abdul Aleem
  • Alibakhshikenari, Mohammad
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
In this article, an inverted L-shaped monopole eight elements Multiple Input Multiple Output (MIMO) antenna system is presented. The multi-antenna system is designed on a low cost 0.8 mm thick FR4 substrate having dimensions of 136 x 68 mm2 resonating at 3.5GHz with a 6dB measured bandwidth of 450MHz, and with inter element isolation greater than 15 dB and gain of 4 dBi. The proposed design consists of eight inverted L-shaped elements and parasitic L-shaped strips extending from the ground plane. These shorted stripes acted as tuning stubs for the four inverted L-shaped monopole elements on the side of chassis. This is done to achieve the desired frequency range by increasing the electrical length of the antennas. A prototype is fabricated, and the experimental results show good impedance matching with reasonable measured isolation within the desired frequency range. The MIMO performances, such as envelope correlation coefficient (ECC) and mean effective gain (MEG) are also calculated along with the channel capacity of 38.1bps/Hz approximately 2.6 times that of 4 x 4 MIMO system. Due to its simple shape and slim design, it may be a potential chassis for future handsets. Therefore, user hand scenarios, i.e. both single and dual hand are studied. Also, the effects of hand scenarios on various MIMO parameters are discussed along with the SAR. The performance of the proposed system in different scenarios suggests that the proposed structure holds promising future within the next generation radio smart phones., This work was supported in part by the Antenna and Wireless Propagation Group, and in part by the Ministerio de Ciencia, Innovación yUniversidades, Gobierno de España (MCIU/AEI/FEDER, UE) under Grant RTI2018-095499-B-C31.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

A comprehensive survey on "Various decoupling mechanisms with focus on metamaterial and metasurface principles applicable to SAR and MIMO antenna systems"

  • Alibakhshikenari, Mohammad
  • Babaeian, Fatemeh
  • Virdee, Bal S.
  • Aïssa, Sonia
  • Azpilicueta Fernández de las Heras, Leyre
  • See, Chan H.
  • Falcone Lanas, Francisco
  • Althuwayb, Ayman Abdulhadi
  • Huynen, Isabelle
  • Abd-Alhameed, Raed
  • Limiti, Ernesto
Nowadays synthetic aperture radar (SAR) and multiple-input-multiple-output (MIMO) antenna systems with the capability to radiate waves in more than one pattern and polarization are playing a key role in modern telecommunication and radar systems. This is possible with the use of antenna arrays as they offer advantages of high gain and beamforming capability, which can be utilized for controlling radiation pattern for electromagnetic (EM) interference immunity in wireless systems. However, with the growing demand for compact array antennas, the physical footprint of the arrays needs to be smaller and the consequent of this is severe degradation in the performance of the array resulting from strong mutual-coupling and crosstalk effects between adjacent radiating elements. This review presents a detailed systematic and theoretical study of various mutual-coupling suppression (decoupling) techniques with a strong focus on metamaterial (MTM) and metasurface (MTS) approaches. While the performance of systems employing antenna arrays can be enhanced by calibrating out the interferences digitally, however it is more ef cient to apply decoupling techniques at the antenna itself. Previously various simple and cost-effective approaches have been demonstrated to effectively suppress unwanted mutual-coupling in arrays. Such techniques include the use of defected ground structure (DGS), parasitic or slot element, dielectric resonator antenna (DRA), complementary split-ring resonators (CSRR), decoupling networks, P.I.N or varactor diodes, electromagnetic bandgap (EBG) structures, etc. In this review, it is shown that the mutual-coupling reduction methods inspired by MTM and MTS concepts can provide a higher level of isolation between neighbouring radiating elements using easily realizable and cost-effective decoupling con gurations that have negligible consequence on the array's characteristics such as bandwidth, gain and radiation ef ciency, and physical footprint., This work was supported in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE) under Grant RTI2018-095499-B-C31, in part by the Innovation Programme under Grant H2020-MSCA-ITN-2016 SECRET-722424, and in part by the U.K. Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Uniform approximations of the first symmetric elliptic integral in terms of elementary functions

  • Bujanda Cirauqui, Blanca
  • López García, José Luis
  • Pagola Martínez, Pedro Jesús
  • Palacios Herrero, Pablo
We consider the standard symmetric elliptic integral RF(x, y, z) for complex x, y, z. We derive convergent expansions of RF(x, y, z) in terms of elementary functions that hold uniformly for one of the three variables x, y or z in closed subsets (possibly unbounded) of C\ (−∞, 0]. The expansions are accompanied by error bounds. The accuracy of the expansions and their uniform features are illustrated by means of some numerical examples., The financial support of the following entities is acknowledged: Ministerio de Economía y Competitividad, project MTM2017-83490-P; Ministerio de Ciencia, Innovación y Universidades, research grant RTI2018-095499-B-C31 IoTrain; Gobierno de Navarra, Grant 0011-1365-2019-000083 - SIAGUS; the European Union-European Regional Development Fund ERDF-FEDER.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Enabling customizable services for multimodal smart mobility with city-platforms

  • Al-Rahamneh, Anas
  • Astrain Escola, José Javier
  • Villadangos Alonso, Jesús
  • Klaina, Hicham
  • Picallo Guembe, Imanol
  • Iturri López, Peio
  • Falcone Lanas, Francisco
In the last decades, the cities' capacity for generating digital information has grown exponentially. In this context, the successful implementation of smart cities' concept depends on the current possibility of handling the significant volumes of sensed data. This is particularly notorious in the case of urban mobility. Researchers in the field of urban planning have shown a great interest in urban mobility problems, proposing different route recommendation services towards making it easier and safer to move around the city. This paper addresses the development of an urban data platform and how to obtain and integrate information from sensors and other data sources to provide aggregated and intelligent views of raw data to support urban mobility. With the aim of evaluating the efficiency of the developed platform, we present an intelligent urban mobility solution, where the context-awareness, user preferences, and environmental factors play a significant role in the process of route planning. Finally, our work provides an experiment to assess different long-range wireless communication technologies to enable its implementation within an urban environment., This work was supported in part by the European Union's Horizon 2020 Research and Innovation Programme (Stardust-Holistic and Integrated Urban Model for Smart Cities) under Grant 774094, in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional-FEDER-, European Union) under Grant RTI2018-095499-B-C31 IoTrain, and in part by the European Commission through the STARDUST Project, and specifically the local partners involved such as the Pamplona City Council, Mancomunidad de la Comarca de Pamplona (MCP), National Renewable Energy Centre of Spain (CENER), Sociedad Ibérica de Construcciones Eléctricas, S. A. (SICE), Asociación Navarra de Informática Municipal (ANIMSA), and Government of Navarre.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Stripline multilayer devices based on Complementary Split Ring Resonators

  • Jarauta Ayensa, Eduardo
  • Falcone Lanas, Francisco
A new analytic design for multilayer stripline devices in planar circuit technology is presented. The Complementary Split Ring Resonator (CSRR) is used as a sub-wavelength resonant particle, which provides high-Q resonances in a compact size. The electromagnetic field distribution achieved along the stripline enables enhanced excitation of the resonators. An optimal solution for multilayer power dividers is presented, in a configuration in which each output is obtained in different layers and also in a different layer than the input line. The solution is expanded to design different devices, such as diplexers, resonators, and multi-frequency resonators, leading to vertical filters. As the resonances are achieved by stacking resonators, the effective circuit footprint is very compact. The proposed devices can be implemented in a volumetric chip fashion, allowing integration with planar transmission line circuits and flexible output connection placement. A complete analysis of the different devices is proposed, extracting and verifying their equivalent circuit models., This work was supported by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional -FEDER-, European Union) under the research grant RTI2018-095499-B-C31 IoTrain.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Deterministic and empirical approach for millimeter-wave complex outdoor smart parking solution deployments

  • Rodríguez Corbo, Fidel Alejandro
  • Azpilicueta Fernández de las Heras, Leyre
  • Celaya Echarri, Mikel
  • Iturri López, Peio
  • Alejos, Ana V.
  • Shubair, Raed M.
  • Falcone Lanas, Francisco
The characterization of different vegetation/vehicle densities and their corresponding effects on large-scale channel parameters such as path loss can provide important information during the deployment of wireless communications systems under outdoor conditions. In this work, a deterministic analysis based on ray-launching (RL) simulation and empirical measurements for vehicle-to-infrastructure (V2I) communications for outdoor parking environments and smart parking solutions is presented. The study was carried out at a frequency of 28 GHz using directional antennas, with the transmitter raised above ground level under realistic use case conditions. Different radio channel impairments were weighed in, considering the progressive effect of first, the density of an incremental obstructed barrier of trees, and the effect of different parked vehicle densities within the parking lot. On the basis of these scenarios, large-scale parameters and temporal dispersion characteristics were obtained, and the effect of vegetation/vehicle density changes was assessed. The characterization of propagation impairments that different vegetation/vehicle densities can impose onto the wireless radio channel in the millimeter frequency range was performed. Finally, the results obtained in this research can aid communication deployment in outdoor parking conditions., Project RTI2018-095499-B-C31, funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

An ontology-based system to avoid UAS flight conflicts and collisions in dense traffic scenarios

  • Martín Lammerding, David
  • Astrain Escola, José Javier
  • Córdoba Izaguirre, Alberto
  • Villadangos Alonso, Jesús
New Unmanned Aerial Systems (UAS) applications will increase air traffic densities in metropolitan regions. Collision avoidance systems (CAS) are a key component in integrating a high number of UAS into the airspace in a safe way. This paper presents a distributed, autonomous, and knowledge-based CAS, called Dronetology System (DroS), for UASs. The CAS proposed here is managed using a novel ontology, called Dronetology-cas, which allows to make autonomous decisions according to the knowledge inferred from the data gathered by the UAS. DroS is deployed as part of the payload of the UAS. So, it is designed to run in an embedded platform with limited processing capacity and low battery consumption. DroS collects data from sensors and collaborative elements to make smart decisions using knowledge obtained from collaborative UASs, adapting the maneuvers of the aerial vehicles to their original flight plans, their kind of vehicle, and the collision scenario. DroS accountability involves recording its internal operation to assist with reconstructing the circumstances surrounding an autonomous maneuver or the details previous to a collision. DroS has been verified using the hardware in the loop (HIL) technique with a UAS traffic environment simulator. Results obtained show a significant improvement in terms of safety by avoiding collisions., This work has been supported in part by the Ministerio de Ciencia e Innovación (Spain) under the research grant RTI2018-095499-B-C31 IoTrain; in part by Agencia Estatal de Investigación (AEI) and European Union NextGeneration EU/PRTR PLEC2021-007997: Holistic power lines predictive maintenance system; and in part by the Government of Navarre (Departamento de Desarrollo Económico) under the research grants 0011-1411-2021-000021 EMERAL: Emergency UAVs for long range operations, 0011-1365-2020-000078 DIVA, and 0011-1411-2021-000025 MOSIC: Plataforma logística de largo alcance, eléctrica y conectada.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

A 3-D indoor analysis of path loss modeling using kriging techniques

  • Diago Mosquera, Melissa
  • Aragón Zavala, Alejandro
  • Azpilicueta Fernández de las Heras, Leyre
  • Shubair, Raed M.
  • Falcone Lanas, Francisco
This study proposes a novel measurement-based method to predict and model three-dimensional (3-D) path loss in indoor scenarios, which first regresses 28 GHz measurements via median path loss modeling and then includes ordinary Kriging to interpolate shadowing. The performance of this method is evaluated by investigating the spatial structure that follows shadowing through the semivariogram, covariance function, and correlogram as variography tools. It is shown that semivariogram outperforms the other statistics to describe shadowing spatial continuity in path loss modeling in terms of the mean absolute error., This work was supported by the National Council of Science and Technology CONACYT, through the student scholarship number 746015, under Project RTI2018-095499-B-C31, funded by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Detection of signals in MC-CDMA using a novel iterative block decision feedback equalizer

  • Bagadi, Kalapraveen
  • Ravikumar, Chinthaginjala V.
  • Sathish, K.
  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Kouhalvandi, Lida
  • Olan Núñez, Karen N.
  • Pau, Giovanni
  • See, Chan H.
  • Dayoub, Iyad
  • Livreri, Patrizia
  • Aïssa, Sonia
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
This paper presents a technique to mitigate multiple access interference (MAI) in multicarrier code division multiple access (MC-CDMA) wireless communications systems. Although under normal circumstances the MC-CDMA system can achieve high spectral efficiency and resistance towards inter symbol interference (ISI) however when exposed to substantial nonlinear distortion the issue of MAI manifests. Such distortion results when the power amplifiers are driven into saturation or when the transmit signal experiences extreme adverse channel conditions. The proposed technique uses a modified iterative block decision feedback equalizer (IB-DFE) that uses a minimal mean square error (MMSE) receiver in the feed-forward path to nullify the residual interference from the IB-DFE receiver. The received signal is re-filtered in an iterative process to significantly improve the MC-CDMA system's performance. The effectiveness of the proposed modified IB-DFE technique in MC-CDMA systems has been analysed under various harsh nonlinear conditions, and the results of this analysis presented here confirm the effectiveness of the proposed technique to outperform conventional methodologies in terms of the bit error rate (BER) and lesser computational complexity., Dr. Mohammad Alibakhshikenari acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538. Also, this work was supported by Project RTI2018-095499-B-C31, funded by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Broadband 3-D shared aperture high isolation nine-element antenna array for on-demand millimeter-wave 5G applications

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Vadalà, Valeria
  • Dalarsson, Mariana
  • Cos Gómez, María Elena de
  • Alharbi, Abdullah G.
  • Burokur, Shah Nawaz
  • Aïssa, Sonia
  • Dayoub, Iyad
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
The paper presents the results of a novel 3-D shared aperture 3 × 3 matrix antenna-array for 26 GHz band 5 G wireless networks. Radiation elements constituting the array are hexagonal-shaped patches that are elevated above the common dielectric substrate by 3.35 mm and excited through a metallic rod of 0.4 mm diameter. The rod protrudes through the substrate of 0.8 mm thickness. It is shown that by isolating each radiating element in the array with a wall suppresses unwanted electromagnetic (EM) wave interactions, resulting in improvement in the antenna’s impedance matching and radiation characteristics. Moreover, the results show that by embedding hexagonalshaped slots in the patches improve the antenna’s gain and radiation efficiency performance. The subwavelength length slots in the patches essentially transform the radiating elements to exhibit metasurface characteristics when the array is illuminated by EM-waves. The proposed array structure has an average gain and radiation efficiency of 20 dBi and 93%, respectively, across 24.0–28.4 GHz. The isolation between its radiation elements is greater than 22 dB. Compared to the unslotted array the improvement in isolation between radiating elements is greater than 11dB, and the gain and efficiency are better than 10.5 dBi, and 25%, respectively. The compact array has a fractional bandwidth of 16% and a form factor of 20 × 20 × 3.35 mm3., Dr. Mohammad Alibakhshikenari acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538. Also, this work was supported by Project RTI2018-095499-B-C31, funded by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

An ontology based system to collect WSN-UAS data effectively

  • Martín Lammerding, David
  • Córdoba Izaguirre, Alberto
  • Astrain Escola, José Javier
  • Medrano Fernández, Pablo
  • Villadangos Alonso, Jesús
Sensor networks have proliferated because of their ease of deployment, low cost, and lifespan. Traditional means of data harvesting are through a mesh network of intermediate nodes. However, there exist some outdoor environments, where the orography, low density of sensors, communication range, and many other issues favor the use of unmanned aerial systems (UASs) to gather data from remote sensors. This approach (wireless sensor network-UAS, WSN-UAS) is simpler and more affordable compared with the deployment of a fixed communication network system but it introduces new challenges in the form of limited flight autonomy, and transmission and reception issues due to the mobility of the sink. This article presents an ontology-based path planning adaptation system, which is later integrated into the UAS payload providing autonomous flight replanning. It reduces the energy consumption of UAS and increases the data throughput of the WSN-UAS network by avoiding unnecessary journeys, improving the overall efficiency., We would also like to thank the Ministerio de Ciencia, Innovación y Universidades (Spain) support (research grant RTI2018-095499-B-C31 IoTrain), the Ministerio de Economía y Competitividad (Spain) support (research grant RTC-2017-6712-3 DOCTOR PV), and the Government of Navarre support (research grants 0011-1411-2019-000005 VELETA and 0011-1365-2019-000098 POWERBVLOS NAVARRE).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Deterministic propagation approach for millimeter-wave outdoor smart parking solution deployment

  • Rodríguez Corbo, Fidel Alejandro
  • Azpilicueta Fernández de las Heras, Leyre
  • Celaya Echarri, Mikel
  • Iturri López, Peio
  • Alejos, Ana V.
  • Falcone Lanas, Francisco
Presented at the 7th Electronic Conference on Sensors and Applications, 15–30 November 2020, Impact factor as an indicator of efficiency or sustainability is entirely correlated with the continuous development of the smart city concept technology application. Intelligent transportation systems (ITSs) and particularly autonomous vehicles are expected to play an important role in this challenging environment. Fast and secure connections will be pivotal in order to achieve this new vehicular communications’ application era. The use of millimeter-wave (mmWave) frequency range is the most promising approach to allow these real-time, high-demand applications that require higher bandwidth with the minimum possible latency. However, an in-depth mmWave-channel characterization of the environment is required for a proper mmWave-based solution deployment. In this work, a complete radio wave propagation channel characterization for a mmWave smart parking solution deployment in a complex outdoor environment was assessed at a 28 GHz frequency band. The considered scenario is a parking lot placed in an open free university campus area surrounded by inhomogeneous vegetation. The vehicle and vegetation density within the scenario, in terms of inherent transceivers density and communication impairments, leads to overall system operation challenges, given by multiple communication links operation at line-of-sight (LOS) and non-line-of-sight (NLOS) conditions. By means of an in-house developed 3D ray launching (3D-RL) algorithm, the impact of variable vegetation density is addressed, providing precise modelling estimations of large-scale multipath propagation effects in terms of received power levels and path loss. The obtained results along with the proposed simulation methodology can aid in an adequate characterization of an mmWave communication channel for new vehicular communications networks, applications, and deployments, considering the outdoor conditions as well as the impact of different vegetation densities, for current as well as for future wireless technologies., Project RTI2018-095499-B-C31, funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Propagation models in vehicular communications

  • Rodríguez Corbo, Fidel Alejandro
  • Azpilicueta Fernández de las Heras, Leyre
  • Celaya Echarri, Mikel
  • Falcone Lanas, Francisco
In the advent of becoming reality, the era of autonomous vehicles is closer than ever, and with it, the need for faster and reliable wireless connections. The propagation channel determines the performance limits of wireless communications, and with the aid of empirical measurements, channel modeling is the best approach to predict and recreate how signal propagation conditions may perform. To this end, many different approaches and techniques have been implemented, from specific applications to general models, considering the characteristics of the environment (geometry-based or non-geometry-based) as well as seeking high performance algorithms in order to achieve good balance between accuracy and computational cost. This paper provides an updated overview of propagation channel models for vehicular communications, beginning with some specific propagation characteristics of these complex heterogeneous environments in terms of diverse communication scenarios, different combinations of link types, antenna placement/diversity, potentially high Doppler shifts, or non-stationarity, among others. The presented channel models are classified in four categories: empirical, non-geometry-based stochastic, geometry-based stochastic, and deterministic models, following the classical approach. The features and key concepts of the different vehicular communications channel models are presented, from sub 6 GHz to millimeter wave (mmWave) frequency bands. The advantages and disadvantages of the main works in the area are discussed and compared in a comprehensive way, outlining their contributions. Finally, future critical challenges and research directions for modeling reliable vehicular communications are introduced, such as the effects of vegetation, pedestrians, common scatterers, micro-mobility or spherical wavefront, which in the context of the near future are presented as research opportunities., This work was supported in part by the School of Engineering and Sciences, Tecnológico de Monterrey, and in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE), under Grant RTI2018-095499-B-C31 and Grant TEC2017-85529-C03-3R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Design and empirical validation of a Bluetooth 5 fog computing based industrial CPS architecture for intelligent industry 4.0 shipyard workshops

  • Fraga Lamas, Paula
  • Iturri López, Peio
  • Celaya Echarri, Mikel
  • Blanco Novoa, Óscar
  • Azpilicueta Fernández de las Heras, Leyre
  • Varela Barbeito, José
  • Falcone Lanas, Francisco
  • Fernández Caramés, Tiago M.
Navantia, one of largest European shipbuilders, is creating a fog computing based Industrial Cyber-Physical System (ICPS) for monitoring in real-time its pipe workshops in order to track pipes and keep their traceability. The deployment of the ICPS is a unique industrial challenge in terms of communications, since in a pipe workshop there is a significant number of metallic objects with heterogeneous typologies. There are multiple technologies that can be used to track pipes, but this article focuses on Bluetooth 5, which is a relatively new technology that represents a cost-effective solution to cope with harsh environments, since it has been significantly enhanced in terms of low power consumption, range, speed and broadcasting capacity. Thus, it is proposed a Bluetooth 5 fog computing based ICPS architecture that is designed to support physically-distributed and low-latency Industry 4.0 applications that off-load network traffic and computational resources from the cloud. In order to validate the proposed ICPS design, one of the Navantia's pipe workshops was modeled through an in-house developed 3D-ray launching radio planning simulator that allows for estimating the coverage provided by the deployed Bluetooth 5 fog computing nodes and Bluetooth 5 tags. The experiments described in this article show that the radio propagation results obtained by the simulation tool are really close to the ones obtained through empirical measurements. As a consequence, the simulation tool is able to reduce ICPS design and deployment time and provide guidelines to future developers when deploying Bluetooth 5 fog computing nodes and tags in complex industrial scenarios., This work was supported in part by the Auto-ID for Intelligent Products research line of the Navantia-UDC Joint Research Unit under Grant IN853B-2018/02, and in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE) under Grant RTI2018-095499-B-C31.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Design, implementation, and empirical validation of an IoT smart irrigation system for fog computing applications based on Lora and Lorawan sensor nodes

  • Froiz Míguez, Iván
  • Iturri López, Peio
  • Fraga Lamas, Paula
  • Celaya Echarri, Mikel
  • Blanco Novoa, Óscar
  • Azpilicueta Fernández de las Heras, Leyre
  • Falcone Lanas, Francisco
  • Fernández Caramés, Tiago M.
Climate change is driving new solutions to manage water more efficiently. Such solutions involve the development of smart irrigation systems where Internet of Things (IoT) nodes are deployed throughout large areas. In addition, in the mentioned areas, wireless communications can be difficult due to the presence of obstacles and metallic objects that block electromagnetic wave propagation totally or partially. This article details the development of a smart irrigation system able to cover large urban areas thanks to the use of Low-Power Wide-Area Network (LPWAN) sensor nodes based on LoRa and LoRaWAN. IoT nodes collect soil temperature/moisture and air temperature data, and control water supply autonomously, either by making use of fog computing gateways or by relying on remote commands sent from a cloud. Since the selection of IoT node and gateway locations is essential to have good connectivity and to reduce energy consumption, this article uses an in-house 3D-ray launching radio-planning tool to determine the best locations in real scenarios. Specifically, this paper provides details on the modeling of a university campus, which includes elements like buildings, roads, green areas, or vehicles. In such a scenario, simulations and empirical measurements were performed for two different testbeds: a LoRaWAN testbed that operates at 868 MHz and a testbed based on LoRa with 433 MHz transceivers. All the measurements agree with the simulation results, showing the impact of shadowing effects and material features (e.g., permittivity, conductivity) in the electromagnetic propagation of near-ground and underground LoRaWAN communications. Higher RF power levels are observed for 433 MHz due to the higher transmitted power level and the lower radio propagation losses, and even in the worst gateway location, the received power level is higher than the sensitivity threshold (–148 dBm). Regarding water consumption, the provided estimations indicate that the proposed smart irrigation system is able to reduce roughly 23% of the amount of used water just by considering weather forecasts. The obtained results provide useful guidelines for future smart irrigation developers and show the radio planning tool accuracy, which allows for optimizing the sensor network topology and the overall performance of the network in terms of coverage, cost, and energy consumption., This work has been funded by the Xunta de Galicia (by Grant No. ED431C 2020/15, and Grant No. ED431G 2019/01 to support the Centro de Investigación de Galicia 'CITIC'), the Agencia Estatal de Investigación of Spain (by grants RTI2018-095499-B-C31, TEC2016-75067-C4-1-R, RED2018-102668-T, and PID2019-104958RB-C42) and ERDF funds of the EU (FEDER Galicia 2014-2020 and AEI/FEDER Programs, UE).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Antenna on chip (AoC) design using metasurface and SIW technologies for THz wireless applications

  • Althuwayb, Ayman Abdulhadi
  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Benetatos, Harry
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
This paper presents the design of a high-performance 0.45-0.50 THz antenna on chip (AoC) for fabrication on a 100-micron GaAs substrate. The antenna is based on metasurface and substrate-integrated waveguide (SIW) technologies. It is constituted from seven stacked layers consisting of copper patch-silicon oxide-feedline-silicon oxide-aluminium-GaAs-copper ground. The top layer consists of a 2 x 4 array of rectangular metallic patches with a row of subwavelength circular slots to transform the array into a metasurface. This essentially enlarges the effective aperture area of the antenna. The antenna is excited using a coplanar waveguide feedline that is sandwiched between the two silicon oxide layers below the patch layer. The proposed antenna structure reduces substrate loss and surface waves. The AoC has dimensions of 0.8 x 0.8 x 0.13 mm(3). The results show that the proposed structure greatly enhances the antenna's gain and radiation efficiency, and this is achieved without compromising its physical size. The antenna exhibits an average gain and efficiency of 6.5 dBi and 65%, respectively, which makes it a promising candidate for emerging terahertz applications., This work is partially supported by RTI2018-095499-B-C31, Funded by Ministerio de Ciencia, Innovacion y Universidades, Gobierno de Espana (MCIU/AEI/FEDER, UE).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Design and implementation of a feasible model for the IoT based ubiquitous healthcare monitoring system for rural and urban areas

  • Bhuiyan, Mohammad Nuruzzaman
  • Billah, Md Masum
  • Bhuiyan, Farzana
  • Bhuiyan, Ashikur Rahman
  • Hasan, Nazmul
  • Rahman, Maryland Mahbubur
  • Miah, Md Sipon
  • Alibakhshikenari, Mohammad
  • Arpanaei, Farhad
  • Falcone Lanas, Francisco
  • Niu, Mingbo
The Internet of Things (IoT) based real-time health monitoring system has contributed towards a brilliant human welfare both in urban and rural areas. Many of such solutions are not well applicable in developing countries like Bangladesh due to lack of uninterrupted communication system. In this paper, we present an IoT-based real-time health monitoring system that can measure, monitor and report people's health condition online and offline from anywhere. Our proposed IoT based solution is capable to transmit the sensitive health information to medical centres and caregivers in real time. The proposed system has been designed with Arduino UNO, Nodemcu, and Global System for Mobile Communication (GSM) modules to measure body temperature, pulse rate, Oxygen saturation, room temperature, and air quality in a smart home setting. The system can also provide the patient's historical health records. Our implementation was tested on some test cases which works excellent with accuracy. The proposed system has high potentiality for the rural and urban areas in developing countries., Dr. Mohammad Alibakhshikenari and Dr. Farhad Arpanaei acknowledge support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538. Also, this work was supported, in part, by Project RTI2018-095499-B-C31, funded by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE), in part, by a Foreign Expert Exchange Project from the Minister of Science and Technology (grant no.: G2021171024L) and in part, by Project PCNNo.IC20201325, funded by Bangladesh Bureau of Educational Information & Statistics (BANBEIS), Ministry of Education, Government of the People’s Republic of Bangladesh.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Analysis of the combinatory effect of uniaxial electrical and magnetic anisotropy on the input impedance and mutual coupling of a printed dipole antenna

  • Bouknia, Mohamed Lamine
  • Zebiri, Chemseddine
  • Sayad, Djamel
  • Elfergani, Issa
  • Alibakhshikenari, Mohammad
  • Rodriguez, Jonathan
  • Abd-Alhameed, Raed
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
The main objective of this work is to investigate the combinatory effects of both uniaxial magnetic and electrical anisotropies on the input impedance, resonant length and the mutual coupling between two dipoles printed on an anisotropic grounded substrate. Three different configurations: broadside, collinear and echelon are considered for the coupling investigation. The study is based on the numerical solution of the integral equation using the method of moments through the mathematical derivation of the appropriate Green's functions in the spectral domain. In order to validate the computing method and evaluated Matlab calculation code, numerical results are compared with available literature treating particular cases of uniaxial electrical anisotropy; good agreements are observed. New results of dipole structures printed on uniaxial magnetic anisotropic substrates are presented and discussed, with the investigation of the combined electrical and magnetic anisotropies effect on the input impedance and mutual coupling for different geometrical configurations. The combined uniaxial (electric and magnetic) anisotropies provide additional degrees of freedom for the input impedance control and coupling reduction., This work was supported in part by the Electronic Components and Systems (ECSEL) Joint Undertaking, which is part of thePOSITION-II Project under Grant Ecsel-7831132- Position-II-2017-IA, www.position-2.eu, in part by Fundação para a Ciência e aTecnologia–Ministério da Ciência, Tecnologia e Ensino Superior (FCT/MCTES) through National Funds and co-funded European Union (EU) Funds under Project UIDB/50008/2020-UIDP/50008/2020, in part by the General Directorate of Scientific Research andTechnological Development (DGRSDT)–Ministry of Higher Education and Scientific Research (MESRS), Algeria, and in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI-Agencia Estatal de Investigación-al Fondo Europeo de Desarrollo Regional (AEI/FEDER), UE) under Grant RTI2018-095499-B-C31.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Design and empirical validation of a LoRaWAN IoT Smart Irrigation System

  • Fraga Lamas, Paula
  • Celaya Echarri, Mikel
  • Azpilicueta Fernández de las Heras, Leyre
  • Iturri López, Peio
  • Falcone Lanas, Francisco
  • Fernández Caramés, Tiago M.
In some parts of the world, climate change has led to periods of drought that require managing efficiently the scarce water and energy resources. This paper proposes an IoT smart irrigation system specifically designed for urban areas where remote IoT devices have no direct access to the Internet or to the electrical grid, and where wireless communications are difficult due to the existence of long distances and multiple obstacles. To tackle such issues, this paper proposes a LoRaWAN-based architecture that provides long distance and communications with reduced power consumption. Specifically, the proposed system consists of IoT nodes that collect sensor data and send them to local fog computing nodes or to a remote cloud, which determine an irrigation schedule that considers factors such as the weather forecast or the moist detected by nearby nodes. It is essential to deploy the IoT nodes in locations within the provided coverage range and that guarantee good speed rates and reduced energy consumption. Due to this reason, this paper describes the use of an in-house 3D-ray launching radio-planning tool to determine the best locations for IoT nodes on a real medium-scale scenario (a university campus) that was modeled with precision, including obstacles such as buildings, vegetation, or vehicles. The obtained simulation results were compared with empirical measurements to assess the operating conditions and the radio planning tool accuracy. Thus, it is possible to optimize the wireless network topology and the overall performance of the network in terms of coverage, cost, and energy consumption., This work was funded by Xunta de Galicia (ED431C 2016-045, ED431G/01) and Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE), Project RTI2018-095499-B-C31.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

High gain/bandwidth off-chip antenna loaded with metamaterial unit-cell impedance matching circuit for sub-terahertz near-field electronic systems

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Mariyanayagam, Dion
  • Vadalà, Valeria
  • Naser Moghadasi, Mohammad
  • See, Chan H.
  • Dayoub, Iyad
  • Aïssa, Sonia
  • Livreri, Patrizia
  • Burokur, Shah Nawaz
  • Pietrenko-Dabrowska, Anna
  • Falcone Lanas, Francisco
  • Koziel, Slawomir
  • Limiti, Ernesto
An innovative of-chip antenna (OCA) is presented that exhibits high gain and efciency performance at the terahertz (THz) band and has a wide operational bandwidth. The proposed OCA is implemented on stacked silicon layers and consists of an open circuit meandering line. It is shown that by loading the antenna with an array of subwavelength circular dielectric slots and terminating it with a metamaterial unit cell, its impedance bandwidth is enhanced by a factor of two and its gain on average by about 4 dB. Unlike conventional antennas, where the energy is dissipated in a resistive load, the technique proposed here signifcantly reduces losses. The antenna is excited from underneath the antenna by coupling RF energy from an open-circuited feedline through a slot in the ground-plane of the middle substrate layer. The feedline is shielded with another substrate layer which has a ground-plane on its opposite surface to mitigate the infuence of the structure on which the antenna is mounted. The antenna has the dimensions 12.3× 4.5 × 0.905 ­mm3 and operates across the 0.137–0.158THz band corresponding to a fractional bandwidth of 14.23%. Over this frequency range the average measured gain and efciency are 8.6 dBi and 77%, respectively. These characteristics makes the proposed antenna suitable for integration in sub-terahertz near-feld electronic systems such as radio frequency identifcation (RFID) devices with high spatial resolution., Dr. Mohammad Alibakhshikenari acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538. Additionally, this work was partially supported by RTI2018-095499-B-C31, Funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE), and by the Icelandic Centre for Research (RANNIS) Grant 206606, and by National Science Centre of Poland Grant 2018/31/B/ST7/02369.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Radio wave propagation and WSN deployment in complex utility tunnel environments

  • Celaya Echarri, Mikel
  • Azpilicueta Fernández de las Heras, Leyre
  • Iturri López, Peio
  • Picallo Guembe, Imanol
  • Aguirre Gallego, Erik
  • Astrain Escola, José Javier
  • Villadangos Alonso, Jesús
  • Falcone Lanas, Francisco
The significant growth of wireless communications systems in the last years has led to the adoption of a wide range of applications not only for the general public but, also, including utilities and administrative authorities. In this context, the notable expansion of new services for smart cities requires, in some specific cases, the construction of underground tunnels in order to enable the maintenance and operation works of utilities, as well as to reduce the visual impact within the city center. One of the main challenges is that, inherently, underground service tunnels lack coverage from exterior wireless communication systems, which can be potentially dangerous for maintenance personnel working within the tunnels. Accordingly, wireless coverage should be deployed within the underground installation in order to guarantee real-time connectivity for safety maintenance, remote surveillance or monitoring operations. In this work, wireless channel characterization for complex urban tunnel environments was analyzed based on the assessment of LoRaWAN and ZigBee technologies operating at 868 MHz. For that purpose, a real urban utility tunnel was modeled and simulated by means of an in-house three-dimensional ray-launching (3D-RL) code. The utility tunnel scenario is a complex and singular environment in terms of radio wave propagation due to the limited dimensions and metallic elements within it, such as service trays, user pathways or handrails, which were considered in the simulations. The simulated 3D-RL algorithm was calibrated and verified with experimental measurements, after which, the simulation and measurement results showed good agreement. Besides, a complete wireless sensor network (WSN) deployment within the tunnels was presented, providing remote cloud data access applications and services, allowing infrastructure security and safety work conditions. The obtained results provided an adequate radio planning approach for the deployment of wireless systems in complex urban utility scenarios, with optimal coverage and enhanced quality of service., This research was funded in part by the School of Engineering and Sciences at Tecnológico de Monterrey, in part by Project RTI2018-095499-B-C31, funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE) and, in part, by the European Union's Horizon 2020 research and Innovation program under grant agreement N◦774094 (Stardust-Holistic and Integrated Urban Model for Smart Cities).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Towards sub-meter level UWB indoor localization using body wearable sensors

  • Otim, Timothy
  • Bahillo, Alfonso
  • Enrique Díez, Luis
  • Iturri López, Peio
  • Falcone Lanas, Francisco
Thanks to its ability to provide sub-meter level positioning accuracy, Ultrawideband (UWB) has found wide use in several wireless body area network (WBAN) applications such as ambient assisted living, remote patient management and preventive care, among others. In spite of the attractiveness of UWB, it is not possible to achieve this level of accuracy when the human body obstructs the wireless channel, leading to a bias in the Time of Flight (TOF) measurements, and hence a detection of position errors of several meters. In this paper, a study of how a sub-meter level of accuracy can be achieved after compensating for body shadowing is presented. Using a Particle Filter (PF), we apply UWB ranging error models that take into consideration the body shadowing effect and evaluate them through simulations and extensive measurements. The results show a significant reduction in the median position error of up to 75 % and 82 % for simulations and experiments, respectively, leading to the achievement of a sub-meter level of localization accuracy., This work was supported in part by the Research Training Grants Program of the University of Deusto, in part by the Spanish Ministry of Science and Innovation under the PeaceOfMind project (ref. PID2019-105470RB-C31), and in part by the project RTI2018-095499-B-C31, funded by Ministerio de Ciencia, Innovacion y Universidades, Gobierno de Espana (MCIU/AEI/FEDER,UE).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Monitoring of electric buses within an urban smart city environment

  • Astrain Escola, José Javier
  • Falcone Lanas, Francisco
  • López Martín, Antonio
  • Sanchis Gúrpide, Pablo
  • Villadangos Alonso, Jesús
A practical experience on monitoring the data generated by electric buses is presented, focusing on energy consumption, charge and state of the batteries. The work is carried out in the framework of a global smart city strategy developed by the H2020 Smart City Lighthouse STARDUST project. The crucial role of the data collection and transmission from electric buses has become evident in this work, so the adopted solutions are covered in detail. A practical electric bus charging station configuration is considered, operating within the city of Pamplona, Spain, with an urban route setting in which electric charging is performed. Various key factors for the practical implementation of the necessary communication infrastructure, including wireless Low Power Wide Area connectivity challenges within the urban scenario settings, based in LoRa/LoRaWAN communication system nodes. The monitoring system architecture is also presented, in which specific machine learning modules in order to collect patterns and visualization of data to enhance planning, operation and maintenance procedures., This work was supported in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE) under Project Project RTI2018-095499-B-C31, and in part by the European Union’s Horizon 2020 Research and Innovation Programme (StardustHolistic and Integrated Urban Model for Smart Cities) under Grant Nº774094.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

A compact CPW-fed ultra-wideband multi-input-multi-output (mimo) antenna for wireless communication networks

  • Ahmad, Sarosh
  • Khan, Shahid
  • Manzoor, Bilal
  • Soruri, Mohammad
  • Alibakhshikenari, Mohammad
  • Dalarsson, Mariana
  • Falcone Lanas, Francisco
In this article, a compact coplanar waveguide (CPW) technique based ultra-wideband multiple-input-multiple-output (MIMO) antenna is proposed. The design is characterized by a broad impedance bandwidth starting from 3 GHz to 11 GHz. The overall size of the MIMO design is $60\times60$ mm2 ( $1.24\times 1.24\,\,\lambda _{g}^{2}$ @ 3 GHz) with a thickness of 1.6 mm. To make the design ultra-wideband, the proposed MIMO antenna design has four jug-shaped radiating elements. The design is printed on a FR-4 substrate (relative permittivity of $\varepsilon _{r} = 4.4$ and loss tangent of $\mathrm {tan}\delta = 0.025$ ). The polarization diversity phenomenon is realized by placing four antenna elements orthogonally. This arrangement increases the isolation among the MIMO antenna elements. The simulated results of the ultra-wideband MIMO antenna are verified by measured results. The proposed MIMO antenna has a measured diversity gain greater than 9.98, envelope correlation coefficient (ECC) less than 0.02, and good MIMO performance where the isolation is more than -20dB between the elements. The group delay, channel capacity loss (CCL), and the total active reflection coefficient (TARC) multiplexing efficiency and mean effective gain results are also analyzed. The group delay is found to be less than 1.2ns, CCL values calculated to be less than 0.4 bits/sec/Hz, while the TARC is below -10dB for the whole operating spectrum. The proposed design is a perfect candidate for ultra-wideband wireless communication systems and portable devices., This work was supported in part by the Universidad Carlos III de Madrid and the European Union's Horizon 2020 Research and Innovation Program under the Marie Sklodowska-Curie Grant 801538, and in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE) under Grant RTI2018-095499-B-C31.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

A comprehensive survey on 'circular polarized antennas' for existing and emerging wireless communication technologies

  • Nadeem, Iram
  • Alibakhshikenari, Mohammad
  • Babaeian, Fatemeh
  • Althuwayb, Ayman Abdulhadi
  • Virdee, Bal S.
  • Azpilicueta Fernández de las Heras, Leyre
  • Khan, Salahuddin
  • Huynen, Isabelle
  • Falcone Lanas, Francisco
  • Denidni, Tayeb A.
  • Limiti, Ernesto
Circular polarized (CP) antennas are well suited for long-distance transmission attainment. In order to be adaptable for beyond 5G communication, a detailed and systematic investigation of their important conventional features is required for expected enhancements. The existing designs employing millimeter wave, microwave, and ultra-wideband (UWB) frequencies form the elementary platform for future studies. The 3.4-3.8 GHz frequency band has been identified as a worthy candidate for 5G communications because of spectrum availability. This band comes under UWB frequencies (3.1-10.6 GHz). In this survey, a review of CP antennas in the selected areas to improve the understanding of early-stage researchers specially experienced antenna designers has presented for the first time as best of our knowledge. Design implementations involving size, axial ratio, efficiency, and gain improvements are covered in detail. Besides that, various design approaches to realize CP antennas including (a) printed CP antennas based on parasitic or slotted elements, (b) dielectric resonator CP antennas, (c) reconfigurable CP antennas, (d) substrate integrated waveguide CP antennas, (e) fractal CP antennas, (f) hybrid techniques CP antennas, and (g) 3D printing CP antennas with single and multiple feeding structures have investigated and analyzed. The aim of this work is to provide necessary guidance for the selection of CP antenna geometries in terms of the required dimensions, available bandwidth, gain, and useful materials for the integration and realization in future communication systems., This project has received funding from Universidad Carlos III de Madrid and the European Union’s Horizon2020 research and innovation program under the Marie Sklodowska-Curie Grant 801538. Also, this work was partially supported by RTI2018-095499-B-C31, Funded by Ministerio de Ciencia,Innovación y Universidades, Gobierno deEspaña (MCIU/AEI/FEDER,UE).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Novel concentric hexagonal-shaped RFID tag antenna with T-shaped stub matching

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Althuwayb, Ayman Abdulhadi
  • Xu, Kai-Da
  • See, Chan H.
  • Khan, Salahuddin
  • Park, Ikmo
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
This paper presents a unique concentric hexagonal-shaped ring antenna for radio frequency identification (RFID) tags. The rings are excited with a common microstrip feedline. The radiation characteristics of the antenna is improved by locating a horizontal a parasitic element in the vicinity of the hexagonal-shaped rings. The proposed antenna was used in the implementation of a 3×1 antenna array. The impedance match of the 3×1 RFID tag was enhanced by incorporating a T-shaped stub. The antenna is designed to operate at the UHF band from 800 MHz to 960 MHz. It was implemented on FR-4 substrate with dielectric constant and thickness of 4.3 and 1.6 mm, respectively. The size of the RFID tag antenna is 36×10 mm2. Its impedance was matched to Alien Higgs RFIC chip of impedance 10 – j 82.5 Ω at 895 MHz. Measured results show the proposed RFID tag antenna provides an impedance bandwidth, maximum gain and radiation efficiency of 160 MHz, 2 dBi, and 66.5%, respectively. With effective isotropic radiated power (EIRP) limited to 36 dBm to comply with FCC regulations for UHF band RFIDs it radiates in the broadside direction over a range of 9 m making it desirable for various applications including supply chain management, logistic control, and vehicle identification., This project has received funding from Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant 801538. Also, this work is partially supported by RTI2018-095499-B-C31, Funded by Ministerio de Ciencia,Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE). Additionally, it received funding from the Researchers Supporting Project number (RSP-2021/58), King Saud University, Riyadh, Saudi Arabia.