Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 266
Encontrada(s) 3 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

A high gain multiband offset MIMO antenna based on a planar log-periodic array for Ku/K-band applications

  • Fakharian, Mohammad Medhi
  • Alibakhshikenari, Mohammad
  • See, Chan Hwang
  • Abd-Alhameed, Raed A.
An offset quad-element, two-port, high-gain, and multiband multiple-input multiple-output (MIMO) planar antenna based on a log-periodic dipole array (LPDA) for Ku/K-band wireless communications is proposed, in this paper. A single element antenna has been designed starting from Carrel’s theory and then optimized with a 50-Ω microstrip feed-line with two orthogonal branches that results mainly in a broadside radiation pattern and improves diversity parameters. For experimental confirmation, the designed structure is printed on an RT-5880 substrate with a thickness of 1.57 mm. The total substrate dimensions of the MIMO antenna are 55 × 45 mm2. According to the measured results, the designed structure is capable of working at 1.3% (12.82–12.98 GHz), 3.1% (13.54–13.96 GHz), 2.3% (14.81–15.15 GHz), 4.5% (17.7–18.52 GHz), and 4.6% (21.1–22.1 GHz) frequency bands. Additionally, the proposed MIMO antenna attains a peak gain of 4.2–10.7 dBi with maximum element isolation of 23.5 dB, without the use of any decoupling structure. Furthermore, the analysis of MIMO performance metrics such as the envelope correlation coefficient (ECC) and mean effective gain (MEG) validates good characteristics, and field correlation performance over the operating band. The proposed design is an appropriate option for multiband MIMO applications for various wireless systems in Ku/K-bands., This project has received funding from Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant 801538. Additionally, this work was supported by the University of Garmsar.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Causality in Schwinger's Picture of Quantum Mechanics

  • Ciaglia, Florio Maria
  • Di Cosmo, Fabio
  • Ibort Latre, Luis Alberto
  • Marmo, Giuseppe
  • Schiavone, Luca
  • Zampini, Alessandro
This paper begins the study of the relation between causality and quantum mechanics, taking advantage of the groupoidal description of quantum mechanical systems inspired by Schwinger’s picture of quantum mechanics. After identifying causal structures on groupoids with a particular class of subcategories, called causal categories accordingly, it will be shown that causal structures can be recovered from a particular class of non-selfadjoint class of algebras, known as triangular operator algebras, contained in the von Neumann algebra of the groupoid of the quantum system. As a consequence of this, Sorkin’s incidence theorem will be proved and some illustrative examples will be discussed., This researchwas funded by the Spanish Ministry of Economy and Competitiveness (MINECO), through the Severo Ochoa Programme for Centres of Excellence in RD (SEV-2015/0554), the MINECO research project PID2020-117477GB-I00, the Comunidad de Madrid project QUITEMAD+, S2013/ICE- 2801, the CONEX-Plus programme (University Carlos III of Madrid), Marie Sklodowska-Curie COFUND Action (H2020-MSCA-COFUND-2017-GA 801538). This work has been supported by the Madrid Government (Comunidad de Madrid-Spain) under the Multiannual Agreement with UC3M in the line of “Research Funds for Beatriz Galindo Fellowships” (C&QIG-BG-CM-UC3M), and in the context of the V PRICIT (Regional Programme of Research and Technological Innovation).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

A metasurface-based single-layered compact AMC-backed dual-band antenna for off-body IoT devices

  • Ahmad, Sarosh
  • Paracha, Kashif Nisar
  • Sheikh, Yawar Ali
  • Ghaffar, Adnan
  • Butt, Arslan Dawood
  • Alibakhshikenari, Mohammad
  • Soh, Ping Jack
  • Khan, Salahuddin
  • Falcone, Francisco
In this article, a compact printed monopole dual-band antenna using artificial magnetic conductor (AMC)-plane with improved gain and broader bandwidth, applicable for off-body internet of things (IoT) devices is presented. The monopole antenna consists of two C-shaped resonators connected through a U-shaped monopole, parasitic elements, discrete ground circular rings and a co-planar waveguide (CPW) feedline. Each artificial magnetic conductor (AMC) unit cell consists of a slotted circular and a square stubs, designed with two zero-crossing phases for improving the radiation characteristics and to achieve the high gain. The overall size of the proposed AMC-backed antenna is 44.4 mm ×44.4 mm ×1.6 mm with electrical dimensions of 0.75lambdag×0.75lambdag×0.027lambdag . This AMC-backed antenna featured measured bandwidths of 9.6% and 12.4% with improved measured gain values of 4.88 dB and 4.73 dB at 2.45 GHz and 5.8 GHz, respectively. The specific absorption rate (SAR) values are analysed and found to be 1.58 W/kg at 2.45 GHz and 0.9 W/kg at 5.8 GHz. Therefore, the proposed AMC-backed antenna is useful for off-body IoT devices operating at 2.45 and 5.8 GHz industrial, scientific, and medical (ISM) band applications., This work was supported in part by the Universidad Carlos III de Madrid; in part by the European Union's Horizon 2020 Research and Innovation Programme under Marie Sklodowska-Curie Grant 801538; in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER and UE) under Grant RTI2018-095499-B-C31; and in part by the Researchers Supporting Project, King Saud University, Riyadh, Saudi Arabia, under Project number RSP-2021/58.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

Cascaded directional coupler-based polarization splitter/combiner on commercial silicon photonics integration platform

  • Spanidou, Kalliopi
  • Orbe Nava, Luis Jorge
  • González Guerrero, Luis
  • Hermann, Dan
  • Carpintero del Barrio, Guillermo
Proceeding of: Integrated Optics: Devices, Materials, and Technologies XXVII (SPIE OPTO 2023), 28 January-3 February, San Francisco, California, United States, Silicon photonic (SiPho) platforms hold vast potential for providing multi-functional processing capabilities, such as filtering, mode-handling, modulation, etc. Structures for polarization manipulation have become essential elements to enhance channel capacity and to facilitate polarization multiplexing functions. Therefore, 1x2 polarization beam splitters (PBS) are introduced as polarization-division key building blocks based on a silicon-on-insulator (SOI) platform for separating/combining the fundamental modes. By cascading three bent directional couplers (DC), high-performance coupling characteristics can be obtained similar to those of asymmetric ones. A first-ever integration of this kind of PBS has been achieved utilizing Tower Semiconductor's PH18MA silicon photonics platform, which offers 180 nm SOI process technology. In this work, both output ports of the proposed PBS are being tested for polarization filtering across a polarization sweep. The advanced features of this integration process pave the way for next-generation coherent transceivers and aim to meet future optical interconnecting requirements. Furthermore, Synopsys OptoCompiler and the Photonic IC Design Flow, featured in Tower¿s process design kit (PDK), were used to design the devices., Authors acknowledge TOWER Semiconductor for the fabrication of the chips and Synopsys Photonic Solutions support through the University Program. We acknowledge financial support by the TERAOPTICS project and TERAWAY project funded from the European Union’s research and innovation programs under grant agreements No. 956857 and No 871668, respectively and the CONEX-Plus project funded by UC3M and the European Union under grant agreement No. 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Impact of surface roughness on the formation of necking instabilities in additive manufactured porous metal plates subjected to dynamic plane strain stretching

  • Murlidhar, Anil Kumar
  • Nieto Fuentes, Juan Carlos
  • Rodríguez Martínez, José Antonio
This paper investigates the influence of surface roughness on multiple necking formation in additive manufactured porous ductile plates subjected to dynamic plane strain stretching. For this purpose, we have developed a computational model in ABAQUS/Explicit which includes surface texture and discrete voids measured from 3D-printed metallic specimens using optical profilometry and X-ray tomography analysis, respectively. The mechanical behavior of the material is described using an elastic–plastic constitutive model, with yielding defined by the isotropic von Mises criterion, an associated flow rule, and a power-law function for the yield stress evolution which depends on plastic strain, plastic strain rate, and temperature. The finite element calculations have been conducted across a broad range of strain rates, from 5000 s−1 to 50000 s−1, to explore the interactions among inertia, surface roughness, and porosity in determining the necking pattern that emerges in the plates at large strains. The finite element results show that surface roughness induces perturbations in the deformation field of the specimen, which lead to early necking localization, while the location and number of necks formed are primarily controlled by the porous microstructure and the loading rate. The results for the neck spacing have shown quantitative agreement with the analytical stability analysis predictions and the unit-cell finite element calculations reported by Rodríguez-Martínez et al. [1]. Moreover, integrating discrete voids into simulations that already account for surface roughness results in a minor reduction in necking strain: surface roughness and porosity demonstrate similar quantitative impacts on necking ductility, which is primarily influenced by inertia effects at the highest strain rates studied. To the best of the authors’ knowledge, this paper presents the first calculations that explore dynamic plastic localization in additive manufactured metals, incorporating actual surface roughness and explicit void representation derived from experimental measurements. This work marks progress in the analysis of 3Dprinted structures under impact loading, aiming to understand and predict the mechanics influencing their energy absorption capacity at high strain rates., The research leading to these results has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme. Project PURPOSE, grant agreement 758056. J. C. Nieto-Fuentes acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme , under the Marie Skłodowska-Curie grant agreement 801538
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Low-Loss Paper-Substrate Triple-Band-Frequency Reconfigurable Microstrip Antenna for Sub-7 GHz Applications

  • Singh, Ajit Kumar
  • Mahto, Santosh Kumar
  • Sinha, Rashmi
  • Alibakhshikenari, Mohammad
  • Al Gburi, Ahmed Jamal Abdullah
  • Ahmad, Ashfaq
  • Kouhalvandi, Lida
  • Virdee, Bal S.
  • Dalarsson, Mariana
In this paper, a low-cost resin-coated commercial-photo-paper substrate is used to design a printed reconfigurable multiband antenna. The two PIN diodes are used mainly to redistribute the surface current that provides reconfigurable properties to the proposed antenna. The antenna size of 40 mm × 40 mm × 0.44 mm with a partial ground, covers wireless and mobile bands ranging from 1.91 GHz to 6.75 GHz. The parametric analysis is performed to achieve optimized design parameters of the antenna. The U-shaped and C-shaped emitters are meant to function at 2.4 GHz and 5.9 GHz, respectively, while the primary emitter is designed to operate at 3.5 GHz. The proposed antenna achieved peak gain and radiation efficiency of 3.4 dBi and 90%, respectively. Simulated and measured results of the reflection coefficient, radiation pattern, gain, and efficiency show that the antenna design is in favorable agreement. Since the proposed antenna achieved wideband (1.91-6.75 GHz) using PIN diode configuration, using this technique the need for numerous electronic components to provide multiband frequency is avoided., Mohammad Alibakhshikenari acknowledges the support from the CONEX-Plus program, funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation program, under the Marie Sklodowska-Curie grant agreement No. 801538. Ashfaq Ahmad sincerely appreciates funding from Researchers Supporting Project number (RSPD2023R666), King Saud University, Riyadh, Saudi Arabia.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Breast Cancer Detection Based on Simplified Deep Learning Technique With Histopathological Image Using BreaKHis Database

  • Toma, Tania Afroz
  • Biswas, Shivazi
  • Miah, Md Sipon
  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Fernando, Sandra
  • Rahman, Md Habibur
  • Ali, Syed Mansoor
  • Arpanaei, Farhad
  • Hossain, Mohammad Amzad
  • Rahman, Md Mahbubur
  • Niu, Ming Bo
  • Parchin, Naser Ojaroudi
  • Livreri, Patrizia
Presented here are the results of an investigation conducted to determine the effectiveness of deep learning (DL)-based systems utilizing the power of transfer learning for detecting breast cancer in histopathological images. It is shown that DL models that are not specifically developed for breast cancer detection can be trained using transfer learning to effectively detect breast cancer in histopathological images. The outcome of the analysis enables the selection of the best DL architecture for detecting cancer with high accuracy. This should facilitate pathologists to achieve early diagnoses of breast cancer and administer appropriate treatment to the patient. The experimental work here used the BreaKHis database consisting of 7909 histopathological pictures from 82 clinical breast cancer patients. The strategy presented for DL training uses various image processing techniques for extracting various feature patterns. This is followed by applying transfer learning techniques in the deep convolutional networks like ResNet, ResNeXt, SENet, Dual Path Net, DenseNet, NASNet, and Wide ResNet. Comparison with recent literature shows that ResNext-50, ResNext-101, DPN131, DenseNet-169 and NASNet-A provide an accuracy of 99.8%, 99.5%, 99.675%, 99.725%, and 99.4%, respectively, and outperform previous studies., The authors acknowledge the support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538. Additionally, the authors also sincerely appreciate funding from Researchers Supporting Project number (RSPD2023R699), King Saud University, Riyadh, Saudi Arabia. Besides above, this work was partially supported by project PCN No IC20201325, funded by Bangladesh Bureau of Educational Information & Statistics (BANBEIS), Ministry of Education, Government of the People’s Republic of Bangladesh. The Article Processing Charge (APC) was afforded by Universidad Carlos III de Madrid (Agreement CRUE-Madroño 2023).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Influence of Deposition Potential on Electrodeposited Bismuth-Copper Oxide Electrodes for Asymmetric Supercapacitor

  • Bobade, Rushikesh G.
  • Dabke, Niteen B.
  • Shaikh, Shoyebmohamad F.
  • Al Enizi, Abdullah M.
  • Pandit, Bidhan
  • Lokhande, Balkrishna J.
  • Ambare, Revanappa C.
The modern research reported the simplest low-cost synthesis of Bismuth-Copper oxide (Bi2CuO4) with spruce-leaf-like morphology and its applications in supercapacitor devices. Bi (NO3)3 .5H2O was used as a precursor during an electrodeposition (ED) method to create the spruce-leaf-like Bi2CuO4 electrode. XRD, XPS, FE-SEM, EDX, and TEM were used to characterize the structures and morphologies of the synthesized materials, while CV, CP, and EIS were used to determine their electrochemical characteristics. The Bi2CuO4 phase was confirmed by XRD patterns, and electrochemical testing demonstrated that the material had better rate capability and an SC of 431.2 F/g at a scan rate of 2 mV/s. After 5,000 cycles, it retained 81.4% of its energy. Additionally, the maximum SC that was attained by the created asymmetric solid-state device ASSD (Bi0.6 V 1 M PVA-KOH AC) was 73.7 F/g. The energy density was 55.3 Wh/Kg at a power density of 4570 W/Kg. The exceptional electrochemical performance of Bi2CuO4 thin film electrodes recommends it has a promising material., Author Dr. Revanappa C. Ambare expresses gratitude to Prof. (Dr.) Balkrishna J. Lokhande for supplying the electrochemical characterization facilities. The authors extend their sincere appreciation to the Researchers Supporting Project number (RSP2024R55), King Saud University, Riyadh, Saudi Arabia for the financial support. Bidhan Pandit acknowledges the CONEX-Plus programme funded by Universidad Carlos III de Madrid (UC3M) and the European Commission through the Marie-Sklodowska Curie COFUND Action (Grant Agreement No. 801538). Bidhan Pandit also acknowledges Universidad Carlos III de Madrid (Agreement CRUE-Madroño 2024) for funding the article processing charge (APC) to make this article open access.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Thermodynamic and exergoeconomic optimization of a new combined cooling and power system based on supercritical CO2 recompression Brayton cycle

  • Yousef Mohamed, Mohamed Samir
  • Santana Santana, Domingo José
Combined cooling and power (CCP) systems have received global attention for their fuel-saving benefits, energy efficiency, and energy generation capabilities. Our research introduces a new and unique CCP system, which utilizes nuclear power. This is achieved through integrating a supercritical carbon dioxide recompression Brayton cycle (SCRBC) with a bottoming cycle, consisting of an absorption power cycle (APC) and a boosterassisted ejector refrigeration cycle (BERC), to simultaneously produce cooling and power. Our research analyses the thermodynamic, exergoeconomic, and comparative aspects of the stand-alone SCRBC and the proposed SCRBC/APC-BERC system. We then conduct a comprehensive parametric analysis to investigate the effects of nine decision variables on the energy efficiency, exergy efficiency, and total cost rate of the proposed system. The proposed SCRBC/APC-BERC system and stand-alone SCRBC system are also optimized based on multiple criteria, including energy utilization factor (EUF), exergy efficiency, and total product unit cost, using Engineering Equation Solver (EES) software. Our results demonstrate that the exergy and energy efficiency of the SCRBC are enhanced using the APC-BERC, and there is also a significant improvement in exergoeconomic performance. In addition, the reactor and sCO2 turbine are identified as the primary and secondary crucial components, respectively, in terms of exergoeconomics. Our analysis shows that the proposed system demonstrates a 12.56% increase in exergetic efficiency while reducing the total product unit cost by 6.32% compared to the stand-alone SCRBC system, which is significantly higher than similar studies in the literature, highlighting the potential of our proposed system., The researcher (Mohamed S. Yousef) acknowledges support from the CONEX-Plus program funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Analysis of gyrobianisotropic media effect on the input impedance, field distribution and mutual coupling of a printed dipole antenna

  • Lamine Bouknia, Mohamed
  • Zebiri, Chemseddine
  • Sayad, Djamel
  • Elfergani, Issa
  • Matin, Mohammad
  • Alibakhshikenari, Mohammad
  • G. Alharbi, Abdullah
  • Fun Hu, Yim
  • Abd-Alhameed, Raed A.
  • Rodríguez, Jonathan
  • Falcone, Francisco
  • Limiti, Ernesto
In this paper, we present an analytical study for the investigation of the effects of the magnetoelectric elements of a reciprocal and nonreciprocal bianisotropic grounded substrate on the input impedance, resonant length of a dipole antenna as well as on the mutual coupling between two element printed dipole array in three configuration geometries: broadside, collinear and echelon printed on the same material. This study examines also the effect of the considered bianisotropic medium on the electric and magnetic field distributions that has been less addressed in the literature for antenna structures. Computations are based on the numerical resolution, using the spectral method of moments, of the integral equation developed through the mathematical derivation of the appropriate spectral Green's functions of the studied dipole configuration. Original results, for chiral, achiral, Tellegen and general bi-anisotropic media cases, are obtained and discussed with the electric and magnetic field distributions for a better understanding and interpretation. These interesting results can serve as a stepping stone for further works to attract more attention to the reciprocal and non-reciprocal Tellgen media in-depth studies., This work is funded in part by: La Direction Générale de la Recherche Scientifique et du Développement Technologique (DGRSDT), Ministry of Higher Education and Scientific Research, Algeria, RTI2018-095499-B-C31, Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant 801538, Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE). Besides above, this work is also supported by the FCT/MEC through national funds and when applicable co-financed by the ERDF, under the PT2020 Partnership Agreement under the UID/EEA/50008/2019 project. This work is part of the POSITION-II project funded by the ECSEL joint Undertaking under Grant Number Ecsel-7831132-Postitio-II-2017-IA, www. posit ion-2. eu.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Optimizing HARQ and relay strategies in limited feedback communication systems

  • Zhang, Mai
  • Castillo, Andres
  • Peleato Iñarrea, Borja Manuel
One of the key challenges for future communication systems is to deal with fast changing channels due to the mobility of users. Having a robust protocol capable of handling transmission failures in unfavorable channel conditions is crucial, but the feedback capacity may be greatly limited due to strict latency requirements. This paper studies the hybrid automatic repeat request (HARQ) techniques involved in re-transmissions when decoding failures occur at the receiver and proposes a scheme that relies on codeword bundling and adaptive incremental redundancy (IR) to maximize the overall throughput in a limited feedback system. In addition to the traditional codeword extension IR bits, this paper introduces a new type of IR, bundle parity bits, obtained from an erasure code across all the codewords in a bundle. The type and number of IR bits to be sent as a response to a decoding failure is optimized through a Markov Decision Process. In addition to the single link analysis, the paper studies how the same techniques generalize to relay and multi-user broadcast systems. Simulation results show that the proposed schemes can provide a significant increase in throughput over traditional HARQ techniques.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Young People's Attitudes towards Democracy and Political Participation: Evidence from a Cross-European Study

  • Fernández Guzmán Grassi, Eva
  • Portos García, Martín
  • Felicetti, Andrea
Some scholars warn about democratic disaffection of young people potentially leading to processes of ‘democratic deconsolidation’. Conversely, others interpret young people’s preference for non-conventional forms of participation as a manifestation of democratic renewal. We surveyed respondents from nine European countries and analysed differences in attitudes of opposition to democracy across age groups and how these preferences shape political mobilization. Our findings show that the youngest adult group is no less supportive of liberal democracy than older age groups. Second, although attitudes of opposition towards democracy decrease political mobilization, this association is independent of age. Thus, young people’s critical views of democracy rarely translate into apathy for democracy. Finally, our results provide insights into intra-generational democratic attitude differences by showing how young people’s individual attributes are likely to crystallize into different value configurations and patterns of democratic engagement over time but within specific contexts., This work has received funding from the European Union's Horizon 2020 research and innovation programme under Grant Agreement No. 727025. MP also acknowledges support from the Conex-Plus Marie Curie framework (G.A. No. 801538) and the Ramón y Cajal grant (G.A. No. RYC2021-032179-I), which is funded by the MCIN/AEI/10.13039/501100011033 and the European Union's ‘NextGenerationEU’/PRTR.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Optimizing power, cooling, and hydrogen generation: A thermodynamic and exergoeconomic study of an advanced sCO2 trigeneration system

  • Yousef Mohamed, Mohamed Samir
  • Santana Santana, Domingo José
This paper presents an innovative trigeneration system designed for efficient power, cooling, and hydrogen production. It combines a supercritical carbon dioxide (sCO2) power cycle with a Kalina cycle (KC) and an ammonia-water-based absorption refrigeration cycle (ARC), all integrated with a PEM electrolyzer (PEME) unit. The system optimally utilizes waste heat from the sCO2 power cycle to enhance power generation through the KC and provide cooling via the ARC. Additionally, it leverages the PEME system and KC-generated power for eco-friendly hydrogen production. Mathematical models, thermodynamic, and exergoeconomic analyses were performed, including parametric studies, optimization, and comparative analyses. The results indicate that the reactor experiences the highest exergy destruction rate, while components in the bottoming cycles exhibit lower exergy destruction. From an exergoeconomic perspective, the reactor and sCO2 turbine are ranked as the first and second most significant components. Under the optimal conditions, the system achieved a 9.76 % increase in exergy efficiency and a 6.63 % reduction in total product unit cost. The system also provides substantial net power output, cooling capacity, and hydrogen production rates of 261.74 MW, 123.95 MW, and 176.328 kg/h, respectively. These findings highlight the system's significant thermodynamic and economic advantages, making it a promising choice for diverse user needs., The researcher (Mohamed S. Yousef) acknowledges support from the CONEX-Plus program funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Efficient Wireless Power Transfer via Magnetic Resonance Coupling Using Automated Impedance Matching Circuit

  • Mousa Ali, Esraa
  • Alibakhshikenari, Mohammad
  • S. Virdee, Bal
  • Soruri, Mohammad
  • Limiti, Ernesto
In this paper, an automated impedance matching circuit is proposed to match the impedance of the transmit and receive resonators for optimum wireless power transfer (WPT). This is achieved using a 2D open-circuited spiral antenna with magnetic resonance coupling in the low-frequency ISM band at 13.56 MHz. The proposed WPT can be adopted for a wide range of commercial applications, from electric vehicles to consumer electronics, such as tablets and smartphones. The results confirm a power transfer efficiency between the transmit and receive resonant circuits of 92%, with this efficiency being sensitive to the degree of coupling between the coupled pair of resonators., The authors sincerely appreciate the funding support from Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Rich kids of Europe? Social basis and strategic choices in the climate activism of Fridays for Future

  • Della Porta, Donatella
  • Portos García, Martín
In 2018, Swedish teenager Greta Thunberg began a school strike that quickly spread across the globe. After a ritual strike every Friday by school pupils to call for urgent action against climate change had gone on for several months, what had become Fridays for Future (FFF) called for various global days of action throughout 2019, bringing millions of people out onto the streets in the largest climate protests in world history. Drawing on unique protest survey data on FFF events across European cities in 2019, this article explores the structural bases of organized collective mobilization for climate justice. Nuancing narratives that focus on either the privileged background of climate justice protesters or the environmentalism of the poor, our results show the heterogeneity of the social composition of the protests, suggesting the need for cross-class alliances for mass mobilizations. Moreover, our analysis reveals that the social background of protesters shaped their attitudes regarding what institutions and approaches can be relied upon to tackle climate and environmental challenges. This suggests an important and under-studied connection between social background and the strategic choices of environmental movements., This work was supported by the Scuola Normale Superiore [grant ‘Democracy in the EU and the Potential of a European Society’ (DEMOS); PI Donatella della Porta]. Martín Portos acknowledges support from the Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation program under the MSCA (Grant Agreement No. 801538).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Design of Wideband Circular-Slot Antenna for Harvesting RF Energy

  • Muhammad, Surajo
  • Smida, Amor
  • Waly, mohamed Ibrahim
  • Mallat, Nazih Khaddaj
  • Iqbal, Amjad
  • Khan, Sadeque Reza
  • Alibakhshikenari, Mohammad
The design of a wideband circular-slot antenna for RF signal harvesting is reported in this work. e proposed design frequency range accommodates the leading contributors to the available RF signals accessible by the RFEH node. ese widely utilized frequency bands comprise GSM1800, UMTS2100, Wi-Fi2.450, and LTE2600. e antenna geometry comprises circular-ring radiating component lled with two orbital circular and rectangular slots. At the bottom plane, a pair of rectangular and semirectangular-circle slits are integrated. e antenna presented is designed on a double layer of 1.6 mm high FR-4 substrate. e source antenna achieved a simulated and measured impedance bandwidth (BW) of 1.510 and 1.590 GHz, amounting to 68% and 73% fractional BW (FBW), covering -10 dB reection coecient (|S11|) between 1.640 to 3.150 GHz and 1.550 to 3.140 GHz, in that order. e wideband circular-slot source antenna realized a maximum measured gain of 1.88, 2.13, 2.81, 3.22, and 4.32 dBi for 1.800, 2.100, 2.450, 2.650, and 3.20 GHz, respectively. e proposed design dimension on the printed board is 0.61 lambdag × 0.70 lambdag. e improved antenna gain is obtained from a circular parasitic patch coupled to the defected ground structure (DGS) for better RF energy harvesting in an ambient environment., Dr. Mohammad Alibakhshikenari acknowledges support from the CONEX-Plus programme funded by the Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Symmetries and Covariant Poisson Brackets on Presymplectic Manifolds

  • Ciaglia, Florio Maria
  • Di Cosmo, Fabio
  • Ibort Latre, Luis Alberto
  • Marmo, Giuseppe
  • Schiavone, Luca
  • Zampini, Alessandro
As the space of solutions of the first-order Hamiltonian field theory has a presymplectic structure, we describe a class of conserved charges associated with the momentum map, determined by a symmetry group of transformations. A gauge theory is dealt with by using a symplectic regularization based on an application of Gotay’s coisotropic embedding theorem. An analysis of electrodynamics and of the Klein–Gordon theory illustrate the main results of the theory as well as the emergence of the energy–momentum tensor algebra of conserved currents., The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the Severo Ochoa Program for Centers of Excellence in RD (SEV-2015/0554). The work was supported by the Madrid Government (Comunidad de Madrid-Spain) under the multiannual agreement with UC3M in the line of “Research Funds for Beatriz Galindo Fellowships” (C&QIG-BG-CM-UC3M), and in the context of the V PRICIT (Regional Programme of Research and Technological Innovation). F. M. Ciaglia, A. Ibort, and L. Schiavone received partial support from the research project QUITEMAD++, S2018/TCS-A4342. F. Di Cosmo thanks the UC3M, the European Commission through the Marie Sklodowska-Curie COFUND Action (H2020-MSCA-COFUND-2017-GA 801538), and Banco Santander for their financial support through the CONEX-Plus program. A. Ibort and L. Schiavone are thankful for the partial support from the MINECO research project PID2020-117477GB-I00. G. Marmo is thankful for the partial financial from the Santander/UC3M Excellence Chair Program 2019/2020. He is also a member of the Gruppo Nazionale di Fisica Matematica (INDAM), Italy. L. Schiavone is thankful for the support from the Italian MIUR through a Ph.D. Fellowship at Dipartimento di Matematica R. Caccioppoli.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Ultra High-Capacity Band and Space Division Multiplexing Backbone EONs: Multi-core v.s Multi-fiber

  • Arpanaei, Farhad
  • Ranjbar Zefreh, Mahdi
  • Natalino, Carlos
  • Lechowicz, Piotr
  • Yan, Shuangyi
  • Rivas Moscoso, José Manuel
  • González de Dios, Óscar
  • Fernández Palacios, Juan Pedro
  • Rabbani, Hami
  • Brandt-Pearce, Maïté
  • Sánchez-Macián, Alfonso
  • Hernández Gutiérrez, José Alberto
  • Larrabeiti López, David
  • Monti, Paolo
Both multi-band and space division multiplexing (SDM) independently represent cost-effective approaches for next-generation optical backbone networks, particularly as data exchange between core data centers reaches the petabit-per-second scale. This paper focuses on different strategies for implementing band and SDM elastic optical network (BSDM EON) technology and analyzes the total network capacity of three sizes of backbone metro-core networks: ultra-long-, long-, and medium-distance networks related to the United States, Japan, and Spain, respectively. Two BSDM strategies are considered, namely, multi-core fibers (MCFs) and BSDM based on standard single-mode fiber (SSMF) bundles of multi-fiber pairs (BuMFPs). For MCF-based BSDM, we evaluated the performance of four manufactured trench-assisted weakly coupled (TAWC) MCFs with 4, 7, 13, and 19 cores. Simulation results reveal that, in the regime of ultra-low (UL) loss and inter-core crosstalk (ICXT), MCF-based throughput can be up to 14% higher than SSMF BuMFP-based BSDM when the core pitch exceeds 43 µm and the loss coefficient is lower than that of standard single-mode fibers. However, increasing the number of cores with (non-)standard cladding diameters, UL loss, and ICXT coefficient is not beneficial. As core counts increase up to 13 for non-standard cladding diameters (µ), the core pitch and loss coefficient also increase, leading to degraded performance of MCF-based BSDM compared to SSMF BuMFP-based BSDM. The results indicate that, in scenarios with 19 MFPs, SSFM BuMFP-based BSDM outperforms 19-core MCF-based scenarios, increasing the throughput by 55% to 73%, from medium-backbone networks to ultra-long ones., Farhad Arpanaei acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agree-ment No. 801538. The authors would like to acknowledge the support of EU-funded SEASON project (grant No. 101096120), and Spanish-funded Fun4date-Redes project (grant No.PID2022-136684OB-C21).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Virtual antenna array for reduced energy per bit transmission at Sub-5 GHz mobile wireless communication systems

  • Alibakhshikenari, Mohammad
  • Virdee, Bal
  • Mariyanayagam, Dion
  • Zuazola, Ignacio Garcia
  • Benetatos, Haralambos Harry
  • Althuwayb, Ayman A.
  • Alali, Bader
  • Xu, Kai-Da
  • Falcone, Francisco
This paper presents an innovative technique to synthesize a virtual antenna array (VAA) that consumes less energy than conventional antenna arrays that are used in mobile communica-tions systems. We have shown that for a specific spectral efficiency a wireless system using the pro-posed virtual antenna array consumes significantly less energy per bit (-3 dB) than a wireless system using a conventional multiple-input multiple-output (MIMO) array. This means the adop-tion of the proposed VAA technology in smartphones, iPad, Tablets and even base-stations should significantly reduce the carbon footprint of wireless systems. The proposed VAA is realized by employing a pair of linear antenna arrays that are placed in an orthogonal configuration relative to each other. This orthogonal arrangement ensures the radiation is circularly polarized. The size of the standard radiating elements constituting the VAA were miniaturized using the topology opti-mization method. The design of the VAA incorporates substrate integrated waveguide (SIW) and metasurface technologies. The function of SIW in the design was twofold, namely, to reduce energy loss in the substrate on which the VAA is implemented, and secondly to mitigate unwanted electro-magnetic interactions between the neighboring radiating elements and thereby enhancing isolation which otherwise would degrade the radiation characteristics of the array. Metasurface technology served to effectively increase the effective aperture of the array with no impact on the footprint of the array. The consequence of SIW and metasurface technologies was improvement in the gain and radiation efficiency of the array. The proposed four orthogonal 4-element VAA covers the entire sub-5 GHz frequency range, and it radiates bidirectional in the azimuth plane and omnidirectional in the elevation plane. Moreover, it is relatively easy to design and fabricate. The proposed VAA has dimensions of 0.96k0 x 0.96k0 x 0.0016k0 at mid-band frequency of 3 GHz. VAA has a measured gain of 25 dBi and radiates with 90% efficiency. The average isolation between the linear arrays constituting the virtual array is better than 27 dB., Dr. Mohammad Alibakhshikenari acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No.801538. The authors also extend their appreciation to the Deputyship for Research & Innovation, Ministry of Education in Saudi Arabia for funding this research work through the project number 223202. Additionally, this work was supported by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional-FEDER-, European Union) under the research grant PID2021-127409OB-C31 CONDOR., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Printed closely spaced antennas loaded by linear stubs in a MIMO style for portable wireless electronic devices

  • Khan, Aqeel Ahmed
  • Khan, Muhammad Saeed
  • Naqvi, Syed Aftab
  • Ijaz, Bilal
  • Asif, Muhammad
  • Ali, Esraa Mousa
  • Khan, Salahuddin
  • Lalbakhsh, Ali
  • Alibakhshikenari, Mohammad
  • Limiti, Ernesto
This article belongs to the Special Issue Transmit and Receive Techniques for Next Generation Massive MIMO Systems., An easy-to-manufacture and efficient four-port-printed Multiple Input Multiple Output (MIMO) antenna operating across an ultra-wideband (UWB) region (2.9–13.6 GHz) is proposed and investigated here. The phenomenon of the polarization diversity is used to improve the isolation between MIMO antenna elements by deploying four orthogonal antenna elements. The proposed printed antenna (40 × 40 × 1.524 mm3) is made compact by optimizing the circular-shaped radiating components via vertical stubs on top of the initial design to maximally reduce unwanted interaction while placing them together in proximity. The measurements of the prototype MIMO antennas corroborate the simulation performance. The findings are compared to the recent relevant works presented in the literature to show that the proposed antenna is suitable for UWB MIMO applications. The proposed printed UWB MIMO antenna could be a good fit for compact portable wireless electronic devices., This project received funding from Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant 801538. Furthermore, this work was partially supported by the Researchers Supporting Project number (RSP-2021/58), King Saud University, Riyadh, Saudi Arabia.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Performance Analysis of RIS-Assisted FSO Communications over Fisher-Snedecor F Turbulence Channels

  • Stefanovic, Caslav
  • Morales Céspedes, Máximo
  • García-Armada, Ana
The Fisher Snedecor (F-S) F distribution has recently been introduced as a tractable turbulence-induced (TI) fading model that fits well with the experimental data. This paper provides a performance evaluation of a free-space optical (FSO) re-configurable intelligent surface (RIS)-assisted communications (ACs) link over the F-S F TI fading channels, assuming the intensity modulation direct detection (IM DD) technique. In particular, novel and closed-form (C-F) analytical expressions for the probability density function (PDF) and cumulative distribution function (CDF) of the end-toend signal-to-noise ratio (SNR) in terms of Gaussian hyper-geometric functions are efficiently derived. Capitalizing on the obtained results, novel C-F analytical expressions for the moment generating function (MMGF), outage probability (OP), average bit error rate (BER) and ergodic channel capacity (Cgamma) of the FSO RIS-ACs system over the F-S F TI fading channels are provided and numerically evaluated under the various TI fading severity conditions. Furthermore, the second-order (S-O) statistical expressions for the level crossing rate (LCR) and average fade duration (AFD) are obtained and thoroughly examined for various FSO RIS-ACs system model parameters., This research was funded by funding from UC3M and the European Unions Horizon 2020 programme under the Marie Skodowska-Curie grant agreement no. 801538 and by project IRENE-EARTH (PID2020-115323RB-C33/AEI/10.13039/501100011033)
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Dirac Geometric Approach for the Unimodular Holst Action

  • Díaz Jiménez, Bogar
  • Sánchez Villaseñor, Eduardo Jesús
  • Zomeño Salas, Diana
We perform a Hamiltonian analysis of unimodular gravity in its first-order formulation, specifically a modification of the Holst action. In order to simplify the analysis, prior studies on this theory have introduced (for several reasons) additional elements, such as parametrization, complex fields, or considering the Barbero-Immirzi parameter as imaginary. We show that, by using a geometric implementation of the Dirac algorithm, a comprehensive analysis of the theory can be conducted without relying on these additional ingredients. The resulting theory reproduces the behavior of metric unimodular gravity., This work was partially supported by the grants PID2020-116567GB-C22 and CEX2019-000904-S funded by MCIN/AEI/10.13039/501100011033. Bogar Díaz acknowledges support for the CONACYT (México) postdoctoral research fellowship No. 371778 and the CONEX-Plus program funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant Agreement No. 801538. E.J.S. Villaseñor is supported by the Madrid Government (Comunidad de Madrid, Spain) under the Multiannual Agreement with UC3M in the line of Excellence of University Professors (EPUC3M23) and in the context of the V PRICIT (Regional Programme of Research and Technological Innovation).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Recurrent neural network with contextual attention for prognostics

  • Dutta Baruah, Rashmi
  • Muñoz Organero, Mario
The fundamental goal of prognostics is to predict a system or component's remaining useful life (RUL), or the span of time until it fails to operate as intended, which is crucial for reducing downtime. Recently, various deep learning approaches have been used for machine prognostics. The sequential models like RNN, LSTM, GRU, and Transformer models can effectively manage implicit contexts defined within the data, such as temporal contexts. Further, the attention mechanism enables the model to focus on different parts of the input sequence. However, such models may struggle with explicitly incorporating external contextual information such as machine operating conditions. In this paper, a novel recurrent neural network (RNN)-based architecture is proposed for RUL prediction that explicitly embeds contextual information into the model. Context influences both the input feature weighting and the computation of the attention vector, resulting in a context-aware attention mechanism. This not only improves prediction performance but also provides interpretability by highlighting the most influential features and parts of input sequences. The proposed architecture is evaluated using two widely adopted benchmark datasets: the NASA C-MPASS Turbofan Engine Degradation Simulation dataset and the Bearing dataset (IEEE PHM 2012 Challenge). Results show that incorporating context significantly improves performance over baseline and state-of-the-art methods. The model achieves up to 18.90% and 59.10% reductions in RMSE and Score on FD002, and 6.86% and 53.88% on FD004 (C-MPASS). On the Bearings dataset, it yields an 84.54% improvement in RMSE and 54.98% in Score over the best existing model. Notably, these gains are achieved using a lightweight model architecture with minimal parameters, demonstrating both effectiveness and efficiency., This work is supported by CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

A comprehensive survey on antennas on-chip based on metamaterial, metasurface, and substrate integrated waveguide principles for millimeter-waves and terahertz integrated circuits and systems

  • Alibakhshikenari, Mohammad
  • Ali, Esraa Mousa
  • Soruri, Mohammad
  • Dalarsson, Mariana
  • Naser-Moghadasi, Mohammad
  • Virdee, Bal S.
  • Stefanovic, Caslav
  • Pietrenko-Dabrowska, Anna
  • Koziel, Slawomir
  • Szczepanski, Stanislaw
  • Limiti, Ernesto
Antennas on-chip are a particular type of radiating elements valued for their small footprint. They are most commonly integrated in circuit boards to electromagnetically interface free space, which is necessary for wireless communications. Antennas on-chip radiate and receive electromagnetic (EM) energy as any conventional antennas, but what distinguishes them is their miniaturized size. This means they can be integrated inside electronic devices. Although on-chip antennas have a limited range, they are suitable for cell phones, tablet computers, headsets, global positioning system (GPS) devices, and WiFi and WLAN routers. Typically, on-chip antennas are handicapped by narrow bandwidth (less than 10%) and low radiation efficiency. This survey provides an overview of recent techniques and technologies investigated in the literature, to implement high performance on-chip antennas for millimeter-waves (mmWave) and terahertz (THz) integrated-circuit (IC) applications. The technologies discussed here include metamaterial (MTM), metasurface (MTS), and substrate integrated waveguides (SIW). The antenna designs described here are implemented on various substrate layers such as Silicon, Graphene, Polyimide, and GaAs to facilitate integration on ICs. Some of the antennas described here employ innovative excitation mechanisms, for example comprising open-circuited microstrip-line that is electromagnetically coupled to radiating elements through narrow dielectric slots. This excitation mechanism is shown to suppress surface wave propagation and reduce substrate loss. Other techniques described like SIW are shown to significantly attenuate surface waves and minimise loss. Radiation elements based on the MTM and MTS inspired technologies are shown to extend the effective aperture of the antenna without compromising the antenna’s form factor. Moreover, the on-chip antennas designed using the above technologies exhibit significantly improved impedance match, bandwidth, gain and radiation efficiency compared to previously used technologies. These features make such antennas a prime candidate for mmWave and THz on-chip integration. This review provides a thorough reference source for specialist antenna designers., This work was supported in part by the Universidad Carlos III de Madrid and the European Union's Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie Grant 801538, in part by the Icelandic Centre for Research (RANNIS) under Grant 206606, and in part by the National Science Centre of Poland under Grant 2018/31/B/ST7/02369.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Numerical comparison of thermal energy performance between spouted, fluidized and fixed beds using supercritical CO2 as fluidizing agent

  • Li, Anjun
  • Hernández Jiménez, Fernando
  • Cano Pleite, Eduardo
  • Wang, Zhenbo
  • Zhu, Liyun
The different thermal energy performance between spouted, fluidized, and fixed beds when using supercritical CO2 as a fluidizing agent was numerically investigated by employing a combined approach of Computational Fluid Dynamics (CFD) and Coarse-Grained Particle (CGP) methods. The model was first validated against experimental data available in the literature, confirming that the simulated particle velocity and temperature agreed well with the experimental measurements. The numerical results reveal that for the spouted bed, gas velocity, gas temperature, and convective heat transfer were higher in the spout region. Hence, most heat was transported directly from the inlet to the outlet of this system. For the fluidized bed, the particles near the gas inlet were quickly heated up at first, and a uniform temperature distribution was achieved in the whole bed during the later stages of the process. Concerning the fixed bed, its behavior is well-known with three temperature zones differentiated, which are a hot region, a cold zone, and the intermediate thermocline. Besides, numerical simulations allow further analysis in detail of the different heat transfer mechanisms in the configurations tested. Convection is the dominant mechanism in all cases. Conduction is noticeable in the fixed bed regime compared to the spouted or fluidized regimes, but even in this case, it is still an order of magnitude lower than the convection mechanism. Finally, thermal energy and exergy were also analyzed for the three beds., This work was supported by the China Scholarship Council for 1-year study at the Universidad Carlos III of Madrid (No. 202006450043), the Fundamental Research Funds for the Central Universities/the Development Fund of State Key Laboratory of Heavy Oil Processing (No. 20CX02215A), and Natural Foundation of Shandong Province (No. ZR2021ME036). This work has been financially supported by the Spanish government under the project PID2019-109224RA-I00/AEI/10.13039/501100011033. Eduardo Cano-Pleite acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 programme under the Marie Sklodowska-Curie grant agreement No. 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Sound effects on body perception vary with the social support network of individuals

  • D'Adamo, Amar
  • Sánchez, Angel
  • De Coster, Lize
  • Tajadura Jiménez, Ana
Mental body representations are malleable and can be influenced by auditory cues. In the "Footsteps illusion," real-time alterations of walking sounds simulate those produced by heavier or lighter bodies, affecting perceptions of body weight, speed, and gender traits, and triggering emotional, behavioral, and physiological changes. While body illusions are known to affect social attitudes, less is known about how social factors influence body perception malleability. We investigated whether social support networks modulate this malleability using the "Footsteps illusion," given the social relevance of body weight. A total of 105 participants experienced three footstep sound conditions (heavier, lighter and control). We collected demographic, behavioral, physiological, and subjective data, along with body image and eating disorder questionnaires. Results showed that larger social support networks correlated with higher body image satisfaction and fewer eating disorder symptoms. Notably, the illusion had a stronger effect on those with smaller social networks, highlighting the moderating role of social support., We would like to thank Lara Maister for referring us to relevant related work. This research was supported by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No 101002711; project BODYinTRANSIT) and by the PID2023-150259OB-C21 project funded by MICIU/AEI (10.13039/ 501100011033) and the European Union. A.S. acknowledges financial support from the PID2022-141802NB-I00 (BASIC) grant funded by MCIN/AEI and by ‘‘ERDF A way of making Europe,’’ and from grant MapCDPerNets—Programa Fundamentos de la Fundacio´ n BBVA 2022. L.D.C. was supported by the CONEX-Plus programme (No. 801538) funded by Carlos III University of Madrid and the European Commission through the Marie Sklodowska-Curie COFUND Action (H2020-MSCACOFUND-2017-GA801538)
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Quantum-Classical Coexistence in Multi-band Optical Networks: A Noise Analysis of QKD

  • Mehdizadeh, Pouya
  • Dibaj, Mohammad Reza
  • Beyranvand, Hamzeh
  • Arpanaei, Farhad
In this letter, we propose to implement quantum key distribution (QKD) by using a multi-band strategy. We present a thorough noise analysis of quantum-classical coexistence while incorporating all relevant and precise noise parameters. Our research demonstrates that utilizing the entire extended C-band for quantum and transmitting classical channels (CChs) over the extended L-band with bandwidth of 75 GHz and power of 0 dBm yields no quantum communication beyond 13 km. To address the problem, we utilize the C+L-band to serve CChs and other bands (e.g., O, E, S) for quantum channels (QChs), while taking into account impairments over the quantum one. Results indicate that, while C+L-band is fully loaded, wavelengths of 1381 nm and below (1260-1381 nm) are appropriate for quantum signals, with 1381 nm offering the highest key rate (3.08 Mbit/sec) over a fiber length of 70 km. Finally, to explore an additional operational scenario when the network is not fully loaded, we focused on determining the optimal policy for assigning CChs. The results reveal the importance of prioritizing the maximization of the gap between the CChs and QChs. In addition, the channel assignment pattern of CChs affects the performance of QChs transmitted at other bands (O, E, and S)., Farhad Arpanaei acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538. The authors from UC3M would like to acknowledge the support of the EU-funded ALLEGRO project (grant No.101092766) and Spanish-funded Fun4date-Redes project (grant No.PID2022-136684OB-C21).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Poisson brackets in Sobolev spaces: a mock holonomy-flux algebra

  • Barbero G., J. Fernando
  • Basquens, Marc
  • Díaz Jiménez, Bogar
  • Sánchez Villaseñor, Eduardo Jesús
The purpose of this paper is to discuss a number of issues that crop up in the computation of Poisson brackets in field theories. This is specially important for the canonical approaches to quantization and, in particular, for loop quantum gravity. We illustrate the main points by working out several examples. Due attention is paid to relevant analytic issues that are unavoidable in order to properly understand how computations should be carried out. Although the functional spaces that we use throughout the paper will likely have to be modified in order to deal with specific physical theories such as general relativity, many of the points that we will raise will also be relevant in that context. The specific example of the mock holonomy-flux algebra will be considered in some detail and used to draw some conclusions regarding the loop quantum gravity formalism., This work has been supported by the grant PID2020-116567GB-C22 funded byMCIN/AEI/10.13039/ 501100011033. E J S Villaseñor is supported by the Madrid Government (Comunidad de Madrid-Spain) under the Multiannual Agreement with UC3M in the line of Excellence of University Professors(EPUC3M23), and in the context of the V PRICIT (Regional Programme of Research and Technological Innovation). Bogar Díaz acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Na3V2(PO4)3 Cathode for Room-Temperature Solid-State Sodium-Ion Batteries: Advanced In Situ Synchrotron X-ray Studies to Understand Intermediate Phase Evolution

  • Pandit, Bidhan
  • Johansen, Morten
  • Martínez Cisneros, Cynthia Susana
  • Naranjo Balseca, Johanna-Monserrath
  • Levenfeld Laredo, Belén
  • Ravnsæk, Dorthe Bomholdt
  • Varez, Alejandro
Sodium-ion batteries (NIBs) can use elements that are abundantly present in Earth"s crust and are technologically feasible for replacing lithium-ion batteries (LIBs). Hence, NIBs are essential components for sustainable energy storage applications. All-solid-state sodium batteries are among the most capable substitutes to LIBs because of their potential to have low price, great energy density, and consistent safety. Nevertheless, more advancements are needed to improve the electrochemical performance of the Na3V2(PO4)3 (NVP) cathode for NIBs, especially with regard to rate performance and operational lifespan. Herein, a core-shell NVP/C structure is accomplished by adopting a solid-state method. The initial reversible capacity of the NVP/C cathode is 106.6 mAh/g (current rate of C/10), which approaches the theoretical value (117.6 mAh/g). It also exhibits outstanding electrochemical characteristics with a reversible capacity of 85.3 mAh/g at 10C and a cyclic retention of roughly 94.2% after 1100 cycles. Using synchrotron-based operando X-ray diffraction, we present a complete examination of phase transitions during sodium extraction and intercalation in NVP/C. To improve safety and given its excellent ionic conductivity and broad electrochemical window, a Na superionic conductor (NASICON) solid electrolyte (Na3.16Zr1.84Y0.16Si2PO12) has been integrated to obtain an all-solid-state NVP/C||Na battery, which provides an exceptional reversible capacity (95 mAh/g at C/10) and long-term cycling stability (retention of 78.3% after 1100 cycles)., B.P. acknowledges the CONEX-Plus programme funded by Universidad Carlos III de Madrid (UC3M) and the European Commission through the Marie-Sklodowska Curie COFUND Action (Grant Agreement No. 801538). This work has been supported by MCIN/AEI/10.13039/501100011033 (projects PID2019-106662RBC43 and PID2022-140373OB-I00), the Madrid Government (Comunidad de Madrid-Spain) through the Multiannual Agreement with UC3M (“Fostering Young Doctors Research”, CIRENAICA-CM-UC3M) and in the context of the VPRICIT (Research and Technological Innovation Regional Programme), and also DROMADER-CM Project (Y2020/NMT6584). We acknowledge MAX IV Laboratory for time on Beamline DanMAX under Proposal 20211012. Research conducted at MAX IV, a Swedish national user facility, is supported by the Swedish Research council under contract 2018-07152, the Swedish Governmental Agency for Innovation Systems under contract 2018-04969, and Formas under contract 2019-02496. DanMAX is funded by the NUFI grant no. 4059-00009B. We thank the Danish Agency for Science, Technology, and Innovation for funding the instrument center DanScatt. B.P. also acknowledges Universidad Carlos III de Madrid (Agreement CRUE-Madroño 2024) for funding the article processing charge (APC) to make this article open access.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Granite Exposure Mapping Through Sentinel-2 Visible and Short Wave Infrared Bands

  • Jan, Nazir
  • Minallah, Nasru
  • Gohar, Neelam
  • Jan, Naveed
  • Khan, Shahid
  • Khan, Salahuddin
  • Alibakhshikenari, Mohammad
Nonmetallic minerals like granite and limestone have calcite and biotitic ingredients as their major part which exhibit wonderful absorption features in the visible and short wave range of the electromagnetic spectrum. This research puts emphasis on delineating granite and limestone deposits of the Mardan district through the latest multispectral Landsat-9 and Sentinel-2 sensors of which the latter provided 94% mapping accuracy in delineating granites (biotitic bearing minerals) and limestone (calcite-bearing minerals). The Image processing techniques of minimum noise fraction, which is double cascaded principal components analysis and pixel purity index algorithms proved helpful to bring significant improvements in classification results and in the reduction of noise and data size. The outcomes of the research study show that supervised machine learning algorithms are impactful to map such minerals provided that the data must be well organized and limited in size. The results achieved were verified through validation steps like, (a) Independent reference data of high-resolution Google Earth maps and (b) Ground survey reports. Arc GIS 10.2 and Envi 5.3 software suite were used to create (a) ground truth points at random for accuracy assessment (b) portraying study area maps (c) Image Processing and Preprocessing tools and (d) implementation of machine learning algorithms. Access to the data and software suite is being provided for open research work., Dr. Mohammad Alibakhshikenari acknowledges support from the CONEX-Plus program funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 801538. The authors also sincerely appreciate funding from Researchers Supporting Project number (RSP2024R58), King Saud University, Riyadh, Saudi Arabia. Besides above, the Article Processing Charge (APC) was afforded by Universidad Carlos III de Madrid (Agreement CRUE-Madroño 2024).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

An electrochemical membrane-based aptasensor for detection of severe acute respiratory syndrome coronavirus-2 receptor-binding domain

  • Amouzadeh Tabrizi, Mahmoud
  • Acedo Gallardo, Pablo
Herein, we report an electrochemical membrane-based aptasensor for the determination of the SARS-CoV-2 receptor-binding domain (SARS-CoV-2-RBD). For this purpose, the nanoporous anodic aluminium oxide membrane (NPAOM) was first fabricated electrochemically. The NPAOM was then functionalized with 3-mercaptopropyl trimethoxysilane (NPAOM-Si-SH). After that, the NPAOM-Si-SH was decorated with gold nanoparticles by using gold ion and sodium borohydride. The NPAOM-Si-S-Aunano was then attached to the surface of the working electrode of a laser-engraved graphene electrode (LEGE). Subsequently, the LEGE/NPAOM-Si-S-Aunano was fixed inside a flow cell that was made by using a three-dimensional (3D) printer, and then thiolated aptamer was transferred into the flow cell using a pump. The electrochemical behavior of the LEGE/NPAOM-Si-S-Aunano-Aptamer was studied using square wave voltammetry (SWV) in the presence of potassium ferrocyanide as a redox probe. The response of the LEGE/NPAOM-Si-S-Aunano-Aptamer to the different concentrations of the SARS-CoV-2-RBD in human saliva sample was investigated in the concentration range of 2.5–40.0 ng/mL. The limit of the detection was found to be 0.8 ng/mL. The LEGE/NPAOM-Si-S-Aunano-Aptamer showed good selectivity to 5.0 ng/mL of SARS-CoV-2-RBD in the presence of five times of the interfering agents like hemagglutinin and neuraminidase as the influenza A virus major surface glycoproteins., This project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Discovering dynamic laws from observations: the case of self-propelled, interacting colloids

  • Ruiz Garcia, Miguel
  • C. Miguel, Barriusio G.
  • Alexander, Lachlan C.
  • Aarts, Dirk G.A.L.
  • Ghiringhelli, Luca M.
  • Valeriani, Chantal
Active matter spans a wide range of time and length scales, from groups of cells and synthetic self-propelled colloids to schools of fish and flocks of birds. The theoretical framework describing these systems has shown tremendous success in finding universal phenomenology. However, further progress is often burdened by the difficulty of determining forces controlling the dynamics of individual elements within each system. Accessing this local information is pivotal for the understanding of the physics governing an ensemble of active particles and for the creation of numerical models capable of explaining the observed collective phenomena. In this work, we present ActiveNet, a machine-learning tool consisting of a graph neural network that uses the collective motion of particles to learn active and two-body forces controlling their individual dynamics. We verify our approach using numerical simulations of active Brownian particles, active particles undergoing underdamped Langevin dynamics, and chiral active Brownian particles considering different interaction potentials and values of activity. Interestingly, ActiveNet can equally learn conservative or nonconservative forces as well as torques. Moreover, ActiveNet has proven to be a useful tool to learn the stochastic contribution to the forces, enabling the estimation of the diffusion coefficients. Therefore, all coefficients of the equation of motion of Active Brownian Particles are captured. Finally, we apply ActiveNet to experiments of electrophoretic Janus particles, extracting the active and two-body forces controlling colloids' dynamics. On the one side, we have learned that the active force depends on the electric field and area fraction. On the other side, we have also discovered a dependence of the two-body interaction with the electric field that leads us to propose that the dominant force between active colloids is a screened electrostatic interaction with a constant length scale. We believe that the proposed methodological tool, ActiveNet, might open a new avenue for the study and modeling of experimental suspensions of active particles., M.R.-G. acknowledges support from the Ramón y Cajal program RYC2021-032055-I and from the CONEX-Plus program funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 801538. L.M.G. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under the grant agreement Nº 951786 (NOMAD CoE). C.V. acknowledges fundings HRC22/00002 and PID2022-140407NB-C21 from MINECO. C.M.G.B. thanks HPC-Europa3 for financial support.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Towards environmental RF-EMF assessment of mmWave high-node density complex heterogeneous environments

  • Celaya-Echarri, Mikel
  • Azpilicueta, Leyre
  • Rodríguez-Corbo, Fidel Alejandro
  • Lopez-Iturri, Peio
  • Ramos, Victoria
  • Alibakhshikenari, Mohammad
  • Shubair, Raed M.
  • Falcone, Francisco
The densification of multiple wireless communication systems that coexist nowadays, as well as the 5G new generation cellular systems advent towards the millimeter wave (mmWave) frequency range, give rise to complex context-aware scenarios with high-node density heterogeneous networks. In this work, a radiofrequency electromagnetic field (RF-EMF) exposure assessment from an empirical and modeling approach for a large, complex indoor setting with high node density and traffic is presented. For that purpose, an intensive and comprehensive in-depth RF-EMF E-field characterization study is provided in a public library study case, considering dense personal mobile communications (5G FR2 @28 GHz) and wireless 802.11ay (@60 GHz) data access services on the mmWave frequency range. By means of an enhanced in-house deterministic 3D ray launching (3D-RL) simulation tool for RF-EMF exposure assessment, different complex heterogenous scenarios of high complexity are assessed in realistic operation conditions, considering different user distributions and densities. The use of directive antennas and MIMO beamforming techniques, as well as all the corresponding features in terms of radio wave propagation, such as the body shielding effect, dispersive material properties of obstacles, the impact of the distribution of scatterers and the associated electromagnetic propagation phenomena, are considered for simulation. Discussion regarding the contribution and impact of the coexistence of multiple heterogeneous networks and services is presented, verifying compliance with the current established international regulation limits with exposure levels far below the aforementioned limits. Finally, the proposed simulation technique is validated with a complete empirical campaign of measurements, showing good agreement. In consequence, the obtained datasets and simulation estimations, along with the proposed RF-EMF simulation tool, could be a reference approach for the design, deployment and exposure assessment of the current and future wireless communication technologies on the mmWave spectrum, where massive high-node density heterogeneous networks are expected., Project RTI2018-095499-B-C31 was funded by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE). This project received funding from Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under Marie Sklodowska-Curie Grant 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Adiabatic lapse rate of real gases

  • Díaz Jiménez, Bogar
  • García Ariza, Miguel Ángel
  • Ramírez, J. E.
We derive a formula for the dry adiabatic lapse rate of atmospheres composed of real gases. We restrict our study to those described by a family of two-parameter cubic equations of state and the recent Guevara-Rodríguez noncubic equation. Since our formula depends on the adiabatic curves, we compute them all at once, considering molecules that can move, rotate, and vibrate, for any equation of state. To illustrate our results, we estimate the lapse rate of the troposphere of Titan, obtaining a better approximation to the observed data in some instances, when compared to the estimation provided by the virial expansion up to the third order., B.D. acknowledges support from the CONEX-Plus programme funded by the Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation program under Marie Sklodowska-Curie Grant No. 801538. J.E.R. acknowledges financial support from the Consejo de Ciencia y Tecnología del Estado de Puebla. This work has been supported by the Spanish Ministerio de Ciencia Innovación y Universidades-Agencia Estatal de Investigación under Grant No. PID2020-116567GB-C22.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Frequency-Selective Surface-Based MIMO Antenna Array for 5G Millimeter-Wave Applications

  • Din, Iftikhar Ud
  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Jayanthi, Renu Karthick Rajaguru
  • Ullah, Sadiq
  • Khan, Salahuddin
  • See, Chan Hwang
  • Golunski, Lukasz
  • Korziel, Slawomir
In this paper, a radiating element consisting of a modified circular patch is proposed for MIMO arrays for 5G millimeter-wave applications. The radiating elements in the proposed 2 × 2 MIMO antenna array are orthogonally configured relative to each other to mitigate mutual coupling that would otherwise degrade the performance of the MIMO system. The MIMO array was fabricated on Rogers RT/Duroid high-frequency substrate with a dielectric constant of 2.2, a thickness of 0.8 mm, and a loss tangent of 0.0009. The individual antenna in the array has a measured impedance bandwidth of 1.6 GHz from 27.25 to 28.85 GHz for S11 ≤ −10 dB, and the MIMO array has a gain of 7.2 dBi at 28 GHz with inter radiator isolation greater than 26 dB. The gain of the MIMO array was increased by introducing frequency-selective surface (FSS) consisting of 7 × 7 array of unit cells comprising rectangular C-shaped resonators, with one embedded inside the other with a central crisscross slotted patch. With the FSS, the gain of the MIMO array increased to 8.6 dBi at 28 GHz. The radiation from the array is directional and perpendicular to the plain of the MIMO array. Owing to the low coupling between the radiating elements in the MIMO array, its Envelope Correlation Coefficient (ECC) is less than 0.002, and its diversity gain (DG) is better than 9.99 dB in the 5G operating band centered at 28 GHz between 26.5 GHz and 29.5 GHz., Mohammad Alibakhshikenari acknowledges support from the CONEX-Plus program funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 801538. The authors also sincerely appreciate funding from Researchers Supporting Project number (RSP2023R58), King Saud University, Riyadh, Saudi Arabia. Besides above, the authors would like to thank Dassault Systemes, France, for making CST Microwave Studio available. Additionally, this work is partially supported by the Icelandic Centre for Research (RANNIS) Grant 239858 and by National Science Centre of Poland Grant 2020/37/B/ST7/01448.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Metasurface-based wideband MIMO antenna for 5G millimeter-wave systems

  • Sehrai, Daniyal Ali
  • Asif, Muhammad
  • Shah, Wahab Ali
  • Khan, Jalal
  • Ullah, Ibrar
  • Ibrar, Muhammad
  • Jan, Saeedullah
  • Alibakhshikenari, Mohammad
  • Falcone, Francisco
  • Limiti, Ernesto
This paper presents a metasurface based multiple-input multiple-output (MIMO) antenna with a wideband operation for millimeter-wave 5G communication systems. The antenna system consists of four elements placed with a 90 degree shift in order to achieve a compact MIMO system while a 2×2 non-uniform metasurface (total four elements) is placed at the back of the MIMO configuration to improve the radiation characteristics of it. The overall size of the MIMO antenna is 24×24 mm 2 while the operational bandwidth of the proposed antenna system ranges from 23.5-29.4 GHz. The peak gain achieved by the proposed MIMO antenna is almost 7dB which is further improved up to 10.44 dB by employing a 2×2 metasurface. The total efficiency is also observed more than 80% across the operating band. Apart from this, the MIMO performance metrics such as envelope correlation coefficient (ECC), diversity gain (DG), and channel capacity loss (CCL) are analyzed which demonstrate good characteristics. All the simulations of the proposed design are carried out in computer simulation technology (CST) software, and measured results reveal good agreement with the simulated one which make it a potential contender for the upcoming 5G communication systems., This work was supported in part by the Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant Agreement No 801538, and in part by the the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE) under Grant RTI2018-095499-B-C31.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Consistent and non-consistent deformations of gravitational theories

  • Barbero G., J. Fernando
  • Basquens, Marc
  • Díaz Jiménez, Bogar
  • Sánchez Villaseñor, Eduardo Jesús
We study the internally abelianized version of a range of gravitational theories, written in connection tetrad form, and study the possible interaction terms that can be added to them in a consistent way. We do this for 2+1 and 3+1 dimensional models. In the latter case we show that the Cartan-Palatini and Holst actions are not consistent deformations of their abelianized versions. We also show that the Husain-Kuchař and Euclidean self-dual actions are consistent deformations of their abelianized counterparts. This suggests that if the latter can be quantized, it could be possible to devise a perturbative scheme leading to the quantization of Euclidean general relativity along the lines put forward by Smolin in the early nineties., This work has been supported by the Spanish Ministerio de Ciencia Innovación y Universidades-Agencia Estatal de Investigación PID2020-116567GB-C22 grants. E.J.S. Villaseñor is supported by the Madrid Government (Comunidad de Madrid-Spain) under the Multiannual Agreement with UC3M in the line of Excellence of University Professors (EPUC3M23), and in the context of the V PRICIT (Regional Programme of Research and Technological Innovation). Bogar Díaz acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

The fluidic memristor as a collective phenomenon in elastohydrodynamic networks

  • Martínez Calvo, Alejandro
  • Biviano, Matthew D.
  • Christensen, Anneline H.
  • Katifori, Eleni
  • Jensen, Kaare H.
  • Ruiz García, Miguel
Fluid flow networks are ubiquitous and can be found in a broad range of contexts, from human-made systems such as water supply networks to living systems like animal and plant vasculature. In many cases, the elements forming these networks exhibit a highly non-linear pressure-flow relationship. Although we understand how these elements work individually, their collective behavior remains poorly understood. In this work, we combine experiments, theory, and numerical simulations to understand the main mechanisms underlying the collective behavior of soft flow networks with elements that exhibit negative differential resistance. Strikingly, our theoretical analysis and experiments reveal that a minimal network of nonlinear resistors, which we have termed a `fluidic memristor', displays history-dependent resistance. This new class of element can be understood as a collection of hysteresis loops that allows this fluidic system to store information, and it can be directly used as a tunable resistor in fluidic setups. Our results provide insights that can inform other applications of fluid flow networks in soft materials science, biomedical settings, and soft robotics, and may also motivate new understanding of the flow networks involved in animal and plant physiology., A.M.-C. acknowledges support from the Princeton Center for Theoretical Science and the Human Frontier Science Program through the grant LT000035/2021-C. M.R.-G. acknowledges support from the Ramón y Cajal program RYC2021-032055-I and from the CONEX-Plus program funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 801538. E.K. acknowledges support from the UPenn MRSEC DMR-2309043, and the Simons Foundation through Investigator grant #568888.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Triadic influence as a proxy for compatibility in social relationships

  • Ruiz García, Miguel
  • Ozaita Corral, Juan
  • Pereda García, María
  • Alfonso, Antonio
  • Brañas Garza, Pablo
  • Cuesta, José A.
  • Sánchez Valdés, Ariel
Networks of social interactions are the substrate upon which civilizations are built. Often, we create new bonds with people that we like or feel that our relationships are damaged through the intervention of third parties. Despite their importance and the huge impact that these processes have in our lives, quantitative scientific understanding of them is still in its infancy, mainly due to the difficulty of collecting large datasets of social networks including individual attributes. In this work, we present a thorough study of real social networks of 13 schools, with more than 3,000 students and 60,000 declared positive and negative relationships, including tests for personal traits of all the students. We introduce a metric -the 'triadic influence'- that measures the influence of nearest neighbors in the relationships of their contacts. We use neural networks to predict the sign of the relationships in these social networks, extracting the probability that two students are friends or enemies depending on their personal attributes or the triadic influence. We alternatively use a high-dimensional embedding of the network structure to also predict the relationships. Remarkably, using the triadic influence (a simple one-dimensional metric) achieves the best accuracy, and adding the personal traits of the students does not improve the results, suggesting that the triadic influence acts as a proxy for the social compatibility of students. We postulate that the probabilities extracted from the neural networks - functions of the triadic influence and the personalities of the students - control the evolution of real social networks, opening an avenue for the quantitative study of these systems., This work has been partly supported by grant PGC2018-098186-B-I00 (BASIC) funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". M.R.-G. acknowledges support from the Spanish Ministry of Science and Innovation and NextGenerationEU through the Ramón y Cajal program (RYC2021-032055-I) and from the CONEX-Plus program funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 801538. P.B.-G. acknowledges support from MCIN (PID2021-126892NB-I00), Agencia Andaluza de Cooperación Internacional para el Desarrollo (AACID-0I008/2020), Universidad de Granada (B.SEJ.280.UGR20), and Junta de Andalucía (PY18-FR-007).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Design of an integrated sub-6 GHz and mmWave MIMO antenna for 5G handheld devices

  • Khalid, Hassan
  • Awan, Wahaj Abbas
  • Hussain, Musa
  • Fatima, Adeela
  • Ali, Mudassir
  • Hussain, Niamat
  • Khan, Salahuddin
  • Alibakhshikenari, Mohammad
  • Limiti, Ernesto
The authors appreciate financial support from Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant Agreement No 801538. As well as, this work was partially supported by the Antenna and Wireless Propagation Group (https://sites.google.com/view/awpgrp/home accessed on 16 June 2021) and from the Researchers Supporting Project number (RSP-2021/58), King Saud University, Riyadh, Saudi Arabia.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Frequency selective surfaces-based miniaturized wideband high-gain monopole antenna for UWB systems

  • Tariq, Sania
  • Hussain, Qasid
  • Alzaidi, Mohammed S.
  • Ghoniem, Rania M.
  • Alibakhshikenari, Mohammad
  • Althuwayb, Ayman A.
  • Virdee, Bal S.
  • Aslam, Muhammad
In the suggested manuscript, an antenna functional over an ultrawide band with a small geometrical configuration and simplified structure is given. The recommended antenna is designed for the Roger 6002, having overall measurements of 40 mm × 30 mm × 1.52 mm. The wideband is obtained after loading stubs and etching slots from the basic antenna design. In order to improve the antenna's performance further, an FSS sheet is designed. The sheet of FSS is placed behind the antenna to reflect the antenna's backward radiation and improve antenna gain. In the results, the gain of the antenna improved from 4.5 dBi to 9.5 dBi. The resultant antenna loaded with FSS is capable of operating over UWB ranging from 3.4 to 9.8 GHz with stable gain throughout the functional bandwidth. The hardware model is manufactured and tested to validate the estimated results achieved from HFSS (High Frequency Structure Simulator). Moreover, the recommended work is differentiated in the form of a table with literature. The compact size, wideband, high gain and stable performance of proposed antenna system over-performs the literature work and makes it protentional candidate for the UWB system requiring high gain., The authors sincerely acknowledge the support from Princess Nourah bint Abdulrahman University Researchers Supporting Project number (PNURSP2023R138), Princess Nourah bint Abdulrahman University, Riyadh, Saudi Arabia. Dr. Mohammad Alibakhshikenari acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538. The Article Processing Charge (APC) was afforded by Universidad Carlos III de Madrid (Read & Publish Agreement CRUE-CSIC 2023).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Novel MIMO Antenna System for Ultra Wideband Applications

  • Alharbi, Abdullah G.
  • Rafique, Umair
  • Ullah, Shakir
  • Khan, Salahuddin
  • Abbas, Syed Muzahir
  • Mousa Ali, Esraa
  • Alibakhshikenari, Mohammad
  • Dalarsson, Mariana
The design of a 4 x 4 MIMO antenna for UWB communication systems is presented in this study. The single antenna element is comprised of a fractal circular ring structure backed by a modified partial ground plane having dimensions of 30 x 30 mm2. The single antenna element has a wide impedance bandwidth of 9.33 GHz and operates from 2.67 GHz to 12 GHz. Furthermore, the gain of a single antenna element increases as the frequency increases, with a peak realized gain and antenna efficiency of 5 dBi and >75%, respectively. For MIMO applications, a 4 x 4 array is designed and analyzed. The antenna elements are positioned in a plus-shaped configuration to provide pattern as well as polarization diversity. It is worth mentioning that good isolation characteristics are achieved without the utilization of any isolation enhancement network. The proposed MIMO antenna was fabricated and tested, and the results show that it provides UWB response from 2.77 GHz to over 12 GHz. The isolation between the antenna elements is more than 15 dB. Based on performance attributes, it can be said that the proposed design is suitable for UWB MIMO applications., The authors would like to appreciate Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme for the funding of this research work under the Marie Sklodowska-Curie Grant 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Cellulose-Based Nanofibers Processing Techniques and Methods Based on Bottom-Up Approach-A Review

  • Kramar, Ana
  • González Benito, Francisco Javier
In the past decades, cellulose (one of the most important natural polymers), in the form of nanofibers, has received special attention. The nanofibrous morphology may provide exceptional properties to materials due to the high aspect ratio and dimensions in the nanometer range of the nanofibers. The first feature may lead to important consequences in mechanical behavior if there exists a particular orientation of fibers. On the other hand, nano-sizes provide a high surface-tovolume ratio, which can have important consequences on many properties, such as the wettability. There are two basic approaches for cellulose nanofibers preparation. The top-down approach implies the isolation/extraction of cellulose nanofibrils (CNFs) and nanocrystals (CNCs) from a variety of natural resources, whereby dimensions of isolates are limited by the source of cellulose and extraction procedures. The bottom-up approach can be considered in this context as the production of nanofibers using various spinning techniques, resulting in nonwoven mats or filaments. During the spinning, depending on the method and processing conditions, good control of the resulting nanofibers dimensions and, consequently, the properties of the produced materials, is possible. Pulp, cotton, and already isolated CNFs/CNCs may be used as precursors for spinning, alongside cellulose derivatives, namely esters and ethers. This review focuses on various spinning techniques to produce submicrometric fibers comprised of cellulose and cellulose derivatives. The spinning of cellulose requires the preparation of spinning solutions; therefore, an overview of various solvents is presented showing their influence on spinnability and resulting properties of nanofibers. In addition, it is shown how bottom-up spinning techniques can be used for recycling cellulose waste into new materials with added value. The application of produced cellulose fibers in various fields is also highlighted, ranging from drug delivery systems, high-strength nonwovens and filaments, filtration membranes, to biomedical scaffolds., This research was funded by CONEX-Plus program of Universidad Carlos III de Madrid and the European Commission through the Marie-Sklodowska Curie COFUND Action (Grant Agreement No 801538). The authors also appreciate the financial support received from AEI (Ministerio de Ciencia e Innovación of Spain, PID2020-112713RB-C22]; the Universidad Carlos III de Madrid due to Fondos de Investigación of Fco. Javier González Benito [2012/00130/004] and the strategic Action in Multifunctional Nanocomposite Materials [Code: 2011/00287/003].
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Design of high gain base station antenna array for mm-wave cellular communication systems

  • Sehrai, Daniyal Ali
  • Khan, Jalal
  • Abdullah, Mujeeb
  • Asif, Muhammad
  • Alibakhshikenari, Mohammad
  • Virdee, Bal
  • Shah, Wahab Ali
  • Khan, Salahuddin
  • Ibrar, Muhammad
  • Jan, Saeedullah
  • Ullah, Amjad
  • Falcone, Francisco
Millimeter wave (mm-Wave) wireless communication systems require high gain antennas to overcome path loss effects and thereby enhance system coverage. This paper presents the design and analysis of an antenna array for high gain performance of future mm-wave 5G communication systems. The proposed antenna is based on planar microstrip technology and fabricated on 0.254 mm thick dielectric substrate (Rogers-5880) having a relative permittivity of 2.2 and loss tangent of 0.0009. The single radiating element used to construct the antenna array is a microstrip patch that has a configuration resembling a two-pronged fork. The single radiator has a realized gain of 7.6 dBi. To achieve the gain required by 5G base stations, a 64-element array antenna design is proposed which has a bore side gain of 21.2 dBi at 37.2 GHz. The 8 × 8, 8 × 16, and 8 × 32 antenna array designs described here were simulated and optimized using CST Microwave Studio, which is a 3D full-wave electromagnetic solver. The overall characteristics of the array in terms of reflection-coefficient and radiation patterns makes the proposed design suitable for mm-Wave 5G and other communication systems., Dr. Mohammad Alibakhshikenari acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538. In addition, this work was partially supported by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional -FEDER-, European Union) under the research grant PID2021-127409OB-C31 CONDOR. The authors also sincerely appreciate funding from Researchers Supporting Project number (RSP2023R58), King Saud University, Riyadh, Saudi Arabia.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

"Nano in Nano"-Incorporation of ZnO Nanoparticles into Cellulose Acetate-Poly(Ethylene Oxide) Composite Nanofibers Using Solution Blow Spinning

  • Voorhis, Caroline
  • González Benito, Francisco Javier
  • Kramar, Ana
In this work, the preparation and characterization of composites from cellulose acetate (CA)–poly(ethylene oxide) (PEO) nanofibers (NFs) with incorporated zinc oxide nanoparticles (ZnO-NPs) using solution blow spinning (SBS) is reported. CA–PEO nanofibers were produced by spinning solution that contained a higher CA-to-PEO ratio and lower (equal) CA-to-PEO ratio. Nanoparticles were added to comprise 2.5% and 5% of the solution, calculated on the weight of the polymers. To have better control of the SBS processing conditions, characterization of the spinning suspensions is carried out, which reveals a decrease in viscosity (two- to eightfold) upon the addition of NPs. It is observed that this variation of viscosity does not significantly affect the mean diameters of nanofibers, but does affect the mode of the nanofibers’ size distribution, whereby lower viscosity provides thinner fibers. FESEM–EDS confirms ZnO NP encapsulation into nanofibers, specifically into the CA component based on UV-vis studies, since the release of ZnO is not detected for up to 5 days in deionized water, despite the significant swelling of the material and accompanied dissolution of water-soluble PEO. Upon the dissolution of CA nanofibers into acetone, immediate release of ZnO is detected, both visually and by spectrometer. ATR–FTIR studies reveal interaction of ZnO with the CA component of composite nanofibers. As ZnO nanoparticles are known for their bioactivity, it can be concluded that these CA–PEO–ZnO composites are good candidates to be used in filtration membranes, with no loss of incorporated ZnO NPs or their release into an environment., This research was funded by the CONEX-Plus program of Universidad Carlos III de Madrid (UC3M) and the European Commission through the Marie-Sklodowska Curie COFUND Action (grant agreement No. 801538). CV and AK are grateful to the Research Labs Program of UC3M.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Crosslinked polymer in NASICON porous ceramics: Novel hybrid electrolytes for sodium solid-state batteries

  • Naranjo Balseca, Johanna-Monserrath
  • Martínez Cisneros, Cynthia Susana
  • Pandit, Bidhan
  • Levenfeld Laredo, Belén
  • Sánchez, Jean Yves
  • Varez, Alejandro
All-solid-state sodium batteries emerge as an excellent alternative to the conventional Li-ion ones towards more reliable, sustainable and safer large-scale energy storage systems able to overcome the current challenges related to climate change and decarbonization. In this study, we present novel sodium hybrid solid electrolytes based on a sintered porous NASICON structure infiltrated with a polymer electrolyte that crosslinks, via radical polymerization, inside the porous microstructure. The porous ceramic material (Na3.16Zr1.84Y0.16Si2PO12) is obtained by combining tape-casting with low-temperature hot pressing, whereas the polymer electrolyte is based in a polycondensate polymer and two different sodium salts (NaClO4 and NaPF6). The hybrid electrolytes are characterized in terms of microstructure, thermal stability and electrochemical behavior. The galvanostatic cycling was performed at 80 °C for both approaches, using a coin cell with configuration Na┃Hybrid electrolyte┃FePO4, obtaining a higher discharge capacity of 160.7 mAh g−1 (C/20) with the hybrid electrolyte based on the NaPF6 salt, which corresponds to 90 % of the theoretical capacity value of FePO4, value higher than that obtained using a dense ceramic electrolyte (Na3.16Zr1.84Y0.16Si2PO12), demonstrating the synergistic effect of both electrolytes (ceramic and polymer). The proposed rigid hybrid electrolytes pave the way for the development of safer electrolytes for all-solid-state batteries., Authors thank the Agencia Española de Investigación/Fondo Europeo de Desarrollo Regional (FEDER/UE) MCIN/AEI/10.13039/501100011033 for funding the project PID2022-140373OB-I00. This work has also been supported by the Comunidad de Madrid (Spain) through two projects: DROMADER-CM (Y2020/NMT6584) and the multiannual agreement with UC3M (“Fostering Young Doctors Research”), CIRENAICA-CM-UC3M. B.P. also acknowledges the CONEX-Plus programme funded by Universidad Carlos III de Madrid (UC3M) and the European Commission through the Marie-Sklodowska Curie COFUND Action (Grant Agreement No 801538). B.P. acknowledges the Iberdrola Foundation under the Marie Skłodowska-Curie Grant Agreement No 101034297. Funding for APC: Universidad Carlos III de Madrid (Read & Publish Agreement CRUE-CSIC 2024).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Highly efficient terahertz dark-field imaging system with 3D-printed components

  • Chung, Bryce
  • Lees, Harrison
  • Ibrahim, Matthew
  • Headland, Daniel Jonathan
  • Withayachumnankul, Withawat
Non-destructive testing and evaluation of targets with low contrast and sub-wavelength features tends to be challenging. By illuminating the target off-axis, dark-field imaging techniques can resolve diffracted or scattered features that are typically challenging to discern with conventional bright-field imaging, which relies on specular reflection exclusively. Traditional dark-field methods achieve off-axis illumination by blocking the central portion of the incident beam, but this unfortunately incurs significant power losses of up to 99%. This level of power loss is unfavorable at terahertz frequencies where source power is relatively scarce. To address this, we propose a terahertz dark-field imaging system that makes use of a double axicon beam expander to create an annular beam, which is then focused down upon the target through an objective. The system permits simultaneous bright- and dark-field imaging in reflection without modifying the optical train, making greater use of raster scan time while achieving an average transmission efficiency of 33.15% and bright-field spatial resolution of 0.391 lp mm-1. The proposed dark-field imaging system is able to enhance the detection of fine features such as growth rings in wood, superficial imperfections on bulk materials, and defects in fiberglass. This approach to achieve dark-field imaging will be valuable for biomedical imaging at the terahertz range that harbors interesting molecular vibration activities., The authors wish to thank the Adelaide University Motorsport Team for manufacturing and providing the carbon fiber panel for examination. Bryce Chung acknowledges the support received for research through the provision of an Australian Government Research Training Program Scholarship. Daniel Headland acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 Research and Innovation Programme under Marie Sklodowska-Curie Grant Agreement No. 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Engineering Breathable Biodegradable Multilayers via Solution Blow Spinning for Sustainable Food Packaging

  • Moshfeghi Far, Nasrin
  • Kramar, Ana
  • González Benito, Francisco Javier
This study investigated porous materials based on cellulose acetate (CA), poly(lactic acid) (PLA), and their multilayer combinations fabricated by solution blow spinning (SBS) for potential food packaging applications. Single-layer neat polymers and multilayer structures (CA/PLA, CA/PLA/CA, and PLA/CA/PLA) were produced through sequential deposition, enabling control of layer arrangement while preserving high porosity. Attenuated total reflectance Fourier-transformed infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis showed negligible polymer interdiffusion or specific intermolecular interactions, indicating that layer integration occurs mainly through physical contact and void filling rather than molecular mixing. Scanning electron microscopy analysis revealed that cellulose acetate possesses a highly porous, interconnected structure, whereas poly(lactic acid) exhibits a predominantly fibrous morphology with clearly distinguishable layers in multilayer systems. Mechanical testing demonstrated that poly(lactic acid) mats had higher stiffness and tensile strength, while cellulose acetate films were more flexible and compliant. Multilayer systems showed complex tensile behavior characterized by interfacial failure and limited load transfer, indicating no synergistic mechanical reinforcement between layers. Water vapor permeability remained high and narrowly distributed for all configurations (890–920 g·m−2·day−1), independent of layer sequence, reflecting the porous morphology. These values exceed those of conventional polymer packaging films, highlighting the suitability of the materials for breathable packaging. Overall, solution blow spinning enables scalable fabrication of biodegradable multilayer materials with tunable mechanical performance for sustainable food packaging applications requiring controlled moisture exchange., This research was funded by the Ministerio de Ciencia, Innovación y Universidades of Spain (MICIU/AEI/10.13039/501100011033, Project I + D + i PID2020-112713RB-C22, PID2023-147765OB-C21), and by the University Carlos III de Madrid, Fondos de Investigación of Fco. Javier González Benito, grant number 2012/00130/004, and the strategic Action in Multifunctional Nanocomposite Materials, grant number 2011/00287/003. CONEX-Plus program of Universidad Carlos III de Madrid (UC3M) and the European Commission through the Marie-Sklodowska Curie COFUND Action, grant number 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Novel concentric hexagonal-shaped RFID tag antenna with T-shaped stub matching

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Althuwayb, Ayman A.
  • Xu, Kai-Da
  • See, Chan Hwang
  • Khan, Salahuddin
  • Park, Ikmo
  • Falcone, Francisco
  • Limiti, Ernesto
This paper presents a unique concentric hexagonal-shaped ring antenna for radio frequency identification (RFID) tags. The rings are excited with a common microstrip feedline. The radiation characteristics of the antenna is improved by locating a horizontal a parasitic element in the vicinity of the hexagonal-shaped rings. The proposed antenna was used in the implementation of a 3×1 antenna array. The impedance match of the 3×1 RFID tag was enhanced by incorporating a T-shaped stub. The antenna is designed to operate at the UHF band from 800 MHz to 960 MHz. It was implemented on FR-4 substrate with dielectric constant and thickness of 4.3 and 1.6 mm, respectively. The size of the RFID tag antenna is 36×10 mm 2 . Its impedance was matched to Alien Higgs RFIC chip of impedance 10 – j 82.5 Ω at 895 MHz. Measured results show the proposed RFID tag antenna provides an impedance bandwidth, maximum gain and radiation efficiency of 160 MHz, 2 dBi, and 66.5%, respectively. With effective isotropic radiated power (EIRP) limited to 36 dBm to comply with FCC regulations for UHF band RFIDs it radiates in the broadside direction over a range of 9 m making it desirable for various applications including supply chain management, logistic control, and vehicle identification., This project has received funding from Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant 801538. Also, this work is partially supported by RTI2018-095499-B-C31, Funded by Ministerio de Ciencia,Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE). Additionally, it received funding from the Researchers Supporting Project number (RSP-2021/58), King Saud University, Riyadh, Saudi Arabia.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Multiple Elements MIMO Antenna System With Broadband Operation for 5th Generation Smart Phones

  • Kiani, Saad Hassan
  • Iqbal, Amjad
  • Wong, Sai-Sai
  • Savci, Huseyin Serif
  • Alibakhshikenari, Mohammad
  • Dalarsson, Mariana
In this work, a simple, low-cost, dual wideband sub6GHz Multiple Input Multiple Output (MIMO) antenna system for a smart phone is presented. The antenna system is fabricated using inexpensive and commercially easily available 0.8 mm thick FR4 substrate. The presented system consists of a single main board and two side boards containing eight antennas and feedings. The radiating elements are etched on the side boards to provide space for other electronic components and RF systems and sub systems. The dimensions of the main board and the two side boards are 150 x 75 x 0.8 mm3 and 150 x 6 x 0.8 mm3, respectively. The radiating elements are etched on the side substrates and the feeding network is designed on the main board. The proposed system resonates at 3.5 GHz and 5 GHz providing -10 dB bandwidth of 250 MHz (ranges from 3.3 GHz to 3.55 GHz) and 1700 MHz (ranges from 4.2 GHz to 6.2 GHz), respectively. The design and the arrangement of the structure enable pattern diversity and ensures at least -15 dB of isolation between any two given radiating elements. Moreover, various different key performance parameters such as envelope correlation coefficient (ECC), mean effective gain (MEG), channel capacity (CC), specific absorption rate (SAR), gain, and efficiency are also presented. It is found that the peak gain of the system is 5.8 dBi, ECC is lower than 0.015, efficiency ranges between 58% to 78%, peak SAR is 1.28 W/Kg, and the maximum CC is 40.2 bps/Hz within the frequency band of interest. In addition, to further demonstrate the usefulness of such structure as a smart mobile terminal, single and dual hand scenarios are also presented. To validate the concept and the computed results, a prototype is fabricated and measured. It is found that the simulated results are in very good agreement with the measured results. Based on the performance and the measured results, we believe that this structure holds a promising future within the next generation smart mobile phones., This work was supported by the Universidad Carlos III de Madrid and the European Union's Horizon 2020 Research and Innovation Program through the Marie Sklodowska-Curie Grant 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Far-Field DOA Estimation of Uncorrelated RADAR Signals through Coprime Arrays in Low SNR Regime by Implementing Cuckoo Search Algorithm

  • Hameed, Khurram
  • Khan, Wasim
  • Abdalla, Yasser S.
  • Al-Harbi, Fatemah F.
  • Armghan, Ammar
  • Asif, Muhammad
  • Salman Qamar, Muhammad
  • Ali, Farman
  • Miah, Md Sipon
  • Alibakhshikenari, Mohammad
  • Dalarsson, Mariana
For the purpose of attaining a high degree of freedom (DOF) for the direction of arrival (DOA) estimations in radar technology, coprime sensor arrays (CSAs) are evaluated in this paper. In addition, the global and local minima of extremely non-linear functions are investigated, aiming to improve DOF. The optimization features of the cuckoo search (CS) algorithm are utilized for DOA estimation of far-field sources in a low signal-to-noise ratio (SNR) environment. The analytical approach of the proposed CSAs, CS and global and local minima in terms of cumulative distribution function (CDF), fitness function and SNR for DOA accuracy are presented. The parameters like root mean square error (RMSE) for frequency distribution, RMSE variability analysis, estimation accuracy, RMSE for CDF, robustness against snapshots and noise and RMSE for Monte Carlo simulation runs are explored for proposed model performance estimation. In conclusion, the proposed DOA estimation in radar technology through CS and CSA achievements are contrasted with existing tools such as particle swarm optimization (PSO)., This project has received funding from Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Capítulo o parte de un libro (BookPart)

Perspectivas sobre la inteligencia artificial y su impacto en el derecho y los derechos humanos

  • Bariffi, Francisco José
El investigador reconoce el apoyo del programa CONEX-Plus financiado por la Universidad Carlos III de Madrid y el programa de investigación e innovación Horizonte 2020 de la Unión Europea bajo el acuerdo de subvención Marie Sklodowska-Curie No. 801538
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

On the second order statistics of N-Hop FSO communications over N-gamma-gamma turbulence induced fading channels

  • Stefanovic, Caslav
  • Panic, Stefan
  • Djosic, Danijel
  • Milic, Dejan
  • Stefanovic, Mihajlo
The paper explores N-hop FSO communications assisted by amplify-and-forward relays (AFRs) over N-gamma-gamma (N-gg) turbulence induced (TI) fading channels. We model TI fading signal as the product of independent but not necessarily identically distributed (i.n.i.d) N number of gg random processes (RPs) in order to address N-hop AFR FSO communications in moderate to strong TI fading conditions. The closed form statistical measures such as: probability density function (PDF), cumulative distribution function (CDF), average level crossing rate (LCR) and average fade duration (AFD) approximated by general Laplace integration formula (LIF) and exponential LIF are derived. The CDF and AFD derived expressions are in terms of finite sums and valid only for an integer value of the parameter related to small-scale atmospheric cells in the first link of N-hop AFR FSO system. The numerical examples for moderate to strong TI fading conditions as well as for various number of hops for the proposed N-hop AFR FSO systems are presented and discussed. Moreover, LIF approximate numerical results are compared with numerical results evaluated from exact integral expressions for the observed system model parameters., Caslav Stefanovic would like to acknowledge CONEX-Plus project. The CONEX-Plus has received research funding from UC3M and the European Unio's Horizon 2020 programme under the Marie Sklodowska-Curie grant agreement No 801538. The authors would like also to acknowledge the COST Action 16220.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Eye movements and eating disorders: protocol for an exploratory experimental study examining the relationship in young-adult women with subclinical symptomatology

  • Navas León, Sergio
  • Sanchez Martín, Milagrosa
  • Tajadura Jiménez, Ana
  • Coster, Lize de
  • Borda Más, Mercedes
  • Morales Márquez, Luis
Background: Recent research indicates that patients with anorexia (AN) show specific eye movement abnormalities such as shorter prosaccade latencies, more saccade inhibition errors, and increased rate of saccadic intrusions compared to participants without AN. However, it remains unknown whether these abnormal eye movement patterns, which may serve as potential biomarkers and endophenotypes for an early diagnosis and preventive clinical treatments, start to manifest also in people with subclinical eating disorders (ED) symptomatology. Therefore, we propose a protocol for an exploratory experimental study to investigate whether participants with subclinical ED symptomatology and control participants differ in their performance on several eye movement tasks. Methods: The sample will be recruited through convenience sampling. The Eating Disorder examination Questionnaire will be administered as a screening tool to split the sample into participants with subclinical ED symptomatology and control participants. A fixation task, prosaccade/antisaccade task, and memory-guided task will be administered to both groups. Additionally, we will measure anxiety and premorbid intelligence as confounding variables. Means comparison, exploratory Pearson's correlations and discriminant analysis will be performed. Discussion: This study will be the first to elucidate the presence of specific eye movement abnormalities in participants with subclinical ED symptomatology. The results may open opportunities for developing novel diagnostic tools/therapies being helpful to the EDs research community and allied fields., This publication is supported by the project grant “MAGIC outFIT” I+D+i /PID2019-105579RB-I00, funded by the Spanish Agencia Estatal de Investigación MCIN/AEI/10.13039/501100011033/, where AT and MS are Principal Investigators. SN is supported by the FPU program from the Spanish Ministerio de Educación, Cultura y Deporte (FPU20/00089). LC acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Urban rebels? A gendered approach to domicile and protest participation in nine European countries

  • Lavizzari, Anna
  • Portos García, Martín
Engaging with research on protest participation and gender inequalities, we examine how gender dynamics play a crucial role in shaping patterns of protest participation across the rural/urban divide. We argue that moving from a rural toward an urban setting leads to an increase in protest participation for women, but not for men. Using an original two-wave panel survey dataset collected for the same individuals between 2018 and 2019 and covering nine European countries, we are able to go beyond traditional correlation analyses and measure our key variables over time, thus developing a dynamic approach that links differences in gender, socio-geographical positioning and protest participation. Our findings demonstrate that the rural/urban divide as a driver of protest participation affects women and men differently, because it might be shaped by different experiences of political socialization, socio-economic status and structures of domination and discrimination, leading to different opportunities and incentives for mobilization., The authors disclosed receipt of the following financial support for the research, authorship and/or publication of this article: this work has received funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. 727025. MP also acknowledges support from the Conex-Plus Marie Curie framework (G.A. No. 801538).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Classical analogs of generalized purities, entropies, and logarithmic negativity

  • Díaz Jiménez, Bogar
  • González, Diego
  • Hernández, Marcos J.
  • Vergara, J. David
It has recently been proposed classical analogs of the purity, linear quantum entropy, and von Neumann entropy for classical integrable systems, when the corresponding quantum system is in a Gaussian state. We generalized these results by providing classical analogs of the generalized purities, Bastiaans-Tsallis entropies, Rényi entropies, and logarithmic negativity for classical integrable systems. These classical analogs are entirely characterized by the classical covariance matrix. We compute these classical analogs exactly in the cases of linearly coupled harmonic oscillators, a generalized harmonic oscillator chain, and a one-dimensional circular lattice of oscillators. In all of these systems, the classical analogs reproduce the results of their quantum counterparts whenever the system is in a Gaussian state. In this context, our results show that quantum information of Gaussian states can be reproduced by classical information., This work was partially supported by DGAPA-PAPIIT Grant No. IN105422 and by the Grants No. PID2020-116567GB-C22, No. CEX2019-000904-S funded by No. MCIN/AEI/10.13039/501100011033. B.D. acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No. 801538. D.G. acknowledges the financial support under Project SIP-20230323 of IPN. M.J.H. is supported with a CONACyT PhD scholarship (No. 940148).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

Performance analysis of N-Fisher-Snedecor F fading and its application to N-Hop FSO communications

  • Stefanovic, Caslav
  • Morales Céspedes, Máximo
  • Roka, Rastislav
  • García-Armada, Ana
Proceedings of: 17th International Symposium on Wireless Communication Systems (ISWCS 2021), 06-09 September 2021, Berlin, Germany., The Fisher-Snedecor F distribution has been recently proposed as an experimentally verified and tractable turbulence induced fading model (TIFM) for free space optical (FSO) communications. This paper provides outage probability (OP) and higher-order (HO) performance analysis of the product of N independent but not identically distributed (i.n.i.d) Fisher-Snedecor F random variates (RVs). Accurate and closed-form (C-F) expressions for cumulative distribution function (CDF), level crossing rate (LCR) and average fade duration (AFD) of N-Fisher-Snedecor F distribution are successfully derived. The general property of a Laplace approximation approach for evaluation of N-folded complex integral-form (I-F) LCR expressions has been applied. The obtained statistical results are directly related to the performance evaluation of N-hop FSO communication links over weak, moderate and strong atmospheric turbulence conditions., The authors would like to acknowledge the CONEXPlus project, the Spanish National Project TERESA-ADA (TEC2017-90093-C3-2-R) (MINECO/AEI/FEDER, UE), the KEGA 034STU-4/2021 "Utilization of Web-based Training and Learning Systems at the Development of New Educational Programs in the Area of Optical Wireless Technologies" and the Cost Action CA19111. The CONEX-Plus has received research funding from UC3M and the European Union's Horizon 2020 programme under the Marie Sklodowska-Curie grant agreement No 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Heat generation depth and temperature distribution in solar receiver tubes subjected to induction

  • Cano Pleite, Eduardo
  • Fernández Torrijos, María
  • Santana Santana, Domingo José
  • Acosta Iborra, Antonio
Induction heating is commonly used in laboratory-scale facilities to replicate the heating conditions of the receiver tubes of concentrated solar power plants. This work aims at shedding light at the induction heating characteristics for such applications through the development of a multiphysics numerical model capable of replicating the experimental conditions of a molten salt loop locally heated by an induction heater. In the experiments, a stainless steel pipe is heated on its external surface by the induction heater, which is switched on and off during the experimental data acquisition while molten salts are continuously circulating in its interior. These conditions are replicated, for the first time, in a two-dimensional numerical domain fully coupling the electromagnetic and thermal physics, including thermally dependent material properties of the heated pipe. Once validated against the experiments, the numerical results revealed that the volumetric nature of the induction heating shall be considered for an accurate representation of the temperature profile inside the tube. As a novelty, different equivalent surface boundary conditions are presented and, despite the Gaussian-like behavior of the induction heating on the surface of the tube, the results indicate that there exists no equivalent wall boundary condition to fully replicate the temperature profile obtained with the induction heater. The effect of independently varying experimental parameters such as the geometry of the pipe (i.e., diameter and thickness) and its distance to the induction heating system is also evaluated. Using large diameters of the tube reduces the difference between the angular temperature profile obtained using induction heating and a simplified wall boundary condition. For small wall thicknesses, the induction heating is capable of penetrating along the whole thickness of the tube, the total heat generated in the volume of the tube being exposed to the counteracting effects of the volumetric generation and the enhancement of the heat dissipation by the molten salt, as both of them increase for small thicknesses. The distance of the inductor to the pipe wall appears to maintain the volumetric characteristics of the heating and only affects the induction heating magnitude and efficiency., This work has been funded by Programa de Atracción de Talento (Modalidad 2) de la Comunidad de Madrid (Spain) 2019-T2/AMB-15938 and the project RTI2018-096664-B-C21 (MICINN, FEDER/UE). Eduardo Cano-Pleite acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 programme under the Marie Sklodowska-Curie grant agreement No. 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

A Wideband Bear-Shaped Compact Size Implantable Antenna for In-Body Communications

  • Ahmad, Sarosh
  • Manzoor, Bilal
  • Paracha, Kashif Nisar
  • Haider, Sajjad
  • Liaqat, Maryam
  • Al-Gburi, Ahmed Jamal Abdullah
  • Ghaffar, Adnan
  • Alibakhshikenari, Mohammad
  • Dalarsson, Mariana
Biomedical implantable antennas play a vital role in medical telemetry applications. These types of biomedical implantable devices are very helpful in improving and monitoring patients' living situations on a daily basis. In the present paper, a miniaturized footprint, thin-profile bear-shaped in-body antenna operational at 915 MHz in the industrial, scientific, and medical (ISM) band is proposed. The design is a straightforward bear-shaped truncated patch excited by a 50-W coaxial probe. The radiator is made up of two circular slots and one rectangular slot at the feet of the patch, and the ground plane is sotted to achieve a broadsided directional radiation pattern, imprinted on a Duroid RT5880 roger substrate with a typical 0.254-mm thickness ( er = 2.2, tan d = 0.0009). The stated antenna has a complete size of 7 mm x 7 mm x 0.254 mm and, in terms of guided wavelength, of 0.027lg x 0.027lg x 0.0011lg. When operating inside skin tissues, the antenna covers a measured bandwidth from 0.86 GHz to 1.08 GHz (220 MHz). The simulations and experimental outcomes of the stated design are in proper contract. The obtained results show that the calculated specific absorption rate (SAR) values inside skin of over 1 g of mass tissue is 8.22 W/kg. The stated SAR values are lower than the limitations of the federal communications commission (FCC). Thus, the proposed miniaturized antenna is an ultimate applicant for in-body communications., This project received funding from Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation program, under the Marie Sklodowska-Curie Grant 801538. It also received partial funding from the Researchers Supporting Project number (RSP- 2021/399), King Saud University, Riyadh, Saudi Arabia.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Quantum tomography and Schwinger's picture of quantum mechanics

  • Ciaglia, Florio Maria
  • Di Cosmo, Fabio
  • Ibort Latre, Luis Alberto
  • Marmo, Giuseppe
Contribution to the Special Collection 'Koopman Methods in Classical and Quantum-Classical Mechanics'., In this paper the problem of tomographic reconstruction of states is investigated within the so-called Schwingers picture of quantum mechanics in which a groupoid is associated with every quantum system. The attention is focussed on spin tomography: in this context the groupoid of interest is the groupoid of pairs over a finite set. In a nutshell, this groupoid is made up of transitions between all possible pairs of outcomes belonging to a finite set. In addition, these transitions possess a partial composition rule, generalizing the notion of groups. The main goal of the paper consists in providing a reconstruction formula for states on the groupoid-algebra associated with the observables of the system. Using the group of bisections of this groupoid, which are special subsets in one-to-one correspondence with the outcomes, a frame is defined and it is used to prove the validity of the tomographic reconstruction. The special case of the set of outcomes being the set of integers modulo n, with n odd prime, is considered in detail. In this case the subgroup of discrete affine linear transformations, whose graphs are linear subspaces of the groupoid, provides a quorum in close analogy with the continuous case., The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the Severo Ochoa Programme for Centres of Excellence in RD (SEV-2015/0554), the MINECO research Project PID2020-117477GB-I00, and Comunidad de Madrid Project QUITEMAD++, S2018/TCS-A4342. GM would like to thank partial financial support provided by the Santander/UC3M Excellence Chair Program 2019/2020, and he is also a member of the Gruppo Nazionale di Fisica Matematica (INDAM), Italy. FDC acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Unions Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No. 801538. FMC acknowledges that the work has been supported by the Madrid Government (Comunidad de Madrid-Spain) under the Multiannual Agreement with UC3M in the line of Research Funds for Beatriz Galindo Fellowships (C\QIG-BG-CM-UC3M), and in the context of the V PRICIT (Regional Programme of Research and Technological Innovation). The authors would like to thank the anonymous referees for many comments which lead to a substantial improvement of the manuscript.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

High Isolated Four Element MIMO Antenna for ISM/LTE/5G (Sub-6GHz) Applications

  • Mahto, Santosh Kumar
  • Singh, Ajit Kumar
  • Sinha, Rashmi
  • Alibakhshikenari, Mohammad
  • Khan, Salahuddin
  • Pau, Giovanni
A compact quad-port Multiple-Input-Multiple-Output (MIMO) antenna with an electrical dimension of 0.28lambda0×0.28lambda0 and impedance bandwidth of 5.03GHz (2.42-7.45GHz) is proposed. By combining a tapered feed line and stubs in the ground plane, which serve as open circuit stubs and whose dimensions are properly tuned to compensate for the antenna"s input impedance, as the inductance and capacitance values are dependent on it, the bandwidth and isolation are improved. The MIMO antenna has a 15dB average isolation and a group delay < 1nsec. In terms of the envelop correlation coefficient (ECC), diversity gain (DG), mean effective gain (MEG), and total active reflection coefficient (TARC), the proposed antenna"s diversity performance characteristics are investigated, and the obtained values are 0.004, 9.99dB, ±3dB, -10dB respectively. Further the channel capacity of the MIMO antenna is also calculated. The maximum channel capacity of the four elements is 21.34bits/sec./Hz. Equivalent circuit of the proposed MIMO is discussed in this article and S-parameter has been compared with simulated results and found good agreement between simulated and circuit results. A prototype was created to compare the calculated parameters with the measured ones to validate the suggested design. In addition, the scattering matrix, which includes the reflection coefficient (S11) and transmission coefficient (S21) between two elements, and other antenna parameters are all advantageous for applications in the Bluetooth (2.400-2.483GHz), ISM band (2.40-2.483GHz, 5.725-5.850GHz), WLAN/Wi-Fi, and 5G (sub-6GHz) bands., Dr. Mohammad Alibakhshikenari acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538. The authors also sincerely appreciate funding from Researchers Supporting Project number (RSP2023R58), King Saud University, Riyadh, Saudi Arabia.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Non-Hermitian topological whispering gallery

  • Hu, Bolun
  • Zhang, Zhiwang
  • Zhang, Haixiao
  • Zheng, Li-Yang
  • Xiong, Wei
  • Yue, Zichong
  • Wang, Xiaoyu
  • Xu, Jianyi
  • Cheng, Ying
  • Liu, Xiaojun
  • Christensen, Johan
In 1878, Lord Rayleigh observed the highly celebrated phenomenon of sound waves that creep around the curved gallery of St Paul's Cathedral in London1,2. These whispering-gallery waves scatter efficiently with little diffraction around an enclosure and have since found applications in ultrasonic fatigue and crack testing, and in the optical sensing of nanoparticles or molecules using silica microscale toroids. Recently, intense research efforts have focused on exploring non-Hermitian systems with cleverly matched gain and loss, facilitating unidirectional invisibility and exotic characteristics of exceptional points3,4. Likewise, the surge in physics using topological insulators comprising non-trivial symmetry-protected phases has laid the groundwork in reshaping highly unconventional avenues for robust and reflection-free guiding and steering of both sound and light5,6. Here we construct a topological gallery insulator using sonic crystals made of thermoplastic rods that are decorated with carbon nanotube films, which act as a sonic gain medium by virtue of electro-thermoacoustic coupling. By engineering specific non-Hermiticity textures to the activated rods, we are able to break the chiral symmetry of the whispering-gallery modes, which enables the out-coupling of topological "audio lasing" modes with the desired handedness. We foresee that these findings will stimulate progress in non-destructive testing and acoustic sensing., This work was supported by the National Basic Research Program of China (2017YFA0303702), NSFC (12074183, 11922407, 11904035, 11834008, 11874215 and 12104226) and the Fundamental Research Funds for the Central Universities (020414380181). Z.Z. acknowledges the support from the China National Postdoctoral Program for Innovative Talents (BX20200165) and the China Postdoctoral Science Foundation (2020M681541). L.Z. acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under Marie Sklodowska-Curie grant agreement 801538. J.C. acknowledges support from the European Research Council (ERC) through the Starting Grant 714577 PHONOMETA and from the MINECO through a Ramón y Cajal grant (grant number RYC-2015-17156).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Adsorption of phenol using adsorbent derived from Saccharum officinarum biomass: optimization, isotherms, kinetics, and thermodynamic study

  • Darla, Upendra R.
  • Lataye, Dilip H.
  • Kumar, Anuj
  • Pandit, Bidhan
  • Ubaidullah, Mohd
The present research shows the application of Taguchi's design of experiment approach to optimize the process parameters for the removal of phenol onto surface of Saccharum officinarum biomass activated carbon (SBAC) from an aqueous solution to maximize adsorption capacity of SBAC. The effect of adsorption parameters viz. adsorbent dose (m), temperature (T), initial concentration (C0) and mixing time (t) on response characteristics i.e., adsorption capacity (qt) has been studied at three levels by using L9 orthogonal array (OA) which further analyzed by variance analysis (ANOVA) for adsorption data and signal/noise (S/N) ratio data by using `larger the better' characteristics. Using ANOVA, the optimum parameters are found to be m = 2 g/L, C0 = 150 mg/L, T = 313 K and t = 90 min, resulting in a maximum adsorption capacity of 64.59 mg/g. Adopting ANOVA, the percentage contribution of each process parameter in descending order of sequence is adsorbent dose 59.97% > initial phenol concentration 31.70% > contact time 4.28% > temperature 4.04%. The phenol adsorption onto SBAC was best fitted with the pseudo-second-order kinetic model and follows the Radke-Prausnitz isotherm model. Thermodynamic parameters suggested a spontaneous, exothermic nature and the adsorption process approaches physisorption followed by chemisorption. Hence the application of Taguchi orthogonal array design is a cost-effective and time-efficient approach for carrying out experiments and optimizing procedures for adsorption of phenol and improve the adsorption capacity of SBAC., Bidhan Pandit acknowledges the CONEX-Plus programme funded by Universidad Carlos III de Madrid (UC3M) and the European Commission through the Marie-Sklodowska Curie COFUND Action (Grant Agreement No 801538). The authors also extend their sincere appreciation to the Researchers Supporting Project number (RSPD2023R682), King Saud University, Riyadh, Saudi Arabia for the support.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

A photo-electrochemical aptasensor for the determination of severe acute respiratory syndrome coronavirus 2 receptor-binding domain by using graphitic carbon nitride-cadmium sulfide quantum dots nanocomposite

  • Amouzadeh Tabrizi, Mahmoud
  • Nazari, Leila
  • Acedo Gallardo, Pablo
Herein, a photoelectrochemical aptasensor for the quantitive measurement of the severe acute respiratory syndrome coronavirus-2 receptor-binding domain (Sars-Cov-2 RBD) has been reported for the first time. For this purpose, first, graphitic carbon nitride and (gC3N4) and cadmium sulfide (CdS) quantum dots were fabricated and characterized. After that, gC3N4 and CdS were mixed well. The fabricated nanomaterials were characterized by scanning transmission electron microscopy. Then, the CdS QDs-gC3N4 nanocomposite was added to the solution containing chitosan as an amine-rich polymer to generate a Chitosan/CdS-gC3N4 nanocomposite. Subsequently, the surface of the ITO electrode was modified with Chitosan/CdS-gC3N4. After that, the amine-terminal aptamer probes were immobilized on the surface of the Chitosan/CdS QDs-gC3N4/ITO electrode by using glutaraldehyde as an amine-amine crosslinker. The electrochemical performances of the electrodes were studied using cyclic voltammetry (CV), electrochemical Impedance Spectroscopy (EIS), and photo-electrochemistry (PEC). The surface coverage of the immobilized aptamer probe was founded to be 26.2 pmol.cm−2. The obtained results demonstrated that the proposed photo-electrochemical aptasensor can be used for the measurement of Sars-Cov-2 RBD within 0.5−32.0 nM. The limit of detection (LOD) was obtained to be 0.12 nM (at 3σ/slope). The affinity of the Aptamer/Chitosan/CdS QDs-gC3N4/ITO was also founded to be 3.4 nM by using Langmuir-typical adsorption systems. The proposed photo-electrochemical aptasensor was applied for the measurement of the spiked Sars-Cov-2 RBD in human saliva samples at two concentrations. The effect of the interfering biomaterials such as human immunoglobulin G human immunoglobulin A, human immunoglobulin M, and human serum albumin was also studied., Researcher Mahmoud Amouzade Tabrizi acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Enabling seamless migration of optical metro-urban networks to the multi-band: Unveiling a cutting-edge 6D planning tool for the 6G era

  • Arpanaei, Farhad
  • Rivas-Moscoso, José Manuel
  • de Francesca, Iván
  • Hernández Gutiérrez, José Alberto
  • Sánchez-Macián, Alfonso
  • Zefreh, Mahdi Ranjbar
  • Larrabeiti López, David
  • Fernández Palacios, Juan Pedro
The relentless demand for high-bandwidth services and applications in the beyond-5G/6G era necessitates optical networks to provide ample spectral resources to accommodate the increasing traffic loads. This requirement is especially pronounced in metro and regional segments, where a projected traffic compound annual growth rate (CAGR) of over 40%, driven by content delivery network (CDN) traffic concentrated near the end users, threatens to push the fiber capacity to its limits on a number of heavily utilized links in the short to medium term. This limitation cannot be circumvented despite the utilization of spectrally efficient modulation formats designed for short-distance transmission. Thus, it is imperative to explore migration strategies to solutions that allow the expansion of spectral resources beyond the current usage of the extended C-band (4.8 THz). In this article, we present a comprehensive evaluation of multi-homed edge-to-core routing, modulation-level selection, and spectrum assignment simulations conducted over reference metropolitan area networks (MANs) by leveraging on a novel network planner called 6D-MAN, which we have developed to adapt to heterogeneous multi-layer networks based on multi-band and multi-fiber transmission. Our simulations consider coherent transmission with flexible modulation format transponders operating at capacities ranging from 100 to 400 Gbps on the 50 GHz grid and explore link-by-link migration strategies restricted to the C + L-band, ensuring optimal performance in terms of the generalized signal-to-noise ratio (GSNR). The obtained results demonstrate that deploying L-band equipment on a selected number of links effectively extends the lifespan of existing networks, enabling congestion-free operation with minimal intervention. In their entirety, our findings underscore the importance of contemplating alternative spectral resources beyond the conventional C-band. They unequivocally accentuate the potential of L-band equipment strategic deployment to tackle capacity constraints in MANs, resulting in a 60% reduction in fiber length and a remarkable 45% decrease in new fiber-pair link deployment needs. The profound implications of efficient fiber capacity utilization manifest themselves in substantial OPEX and optical total cost of ownership savings, amounting to approximately 71% and 17%-27%, respectively, over a 10-year period. This research provides valuable insights for MAN operators seeking sustainable strategies to support the growing demands of future beyond-5G/6G services., Farhad Arpanaei acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538. The authors would like to acknowledge the support of EU-funded B5G-OPEN and ALLEGRO projects (grant No.101016663 and 101092766).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

High performance NASICON ceramic electrolytes produced by tape-casting and low-temperature hot-pressing: Towards sustainable all-solid-state sodium batteries operating at room temperature

  • Naranjo Balseca, Johanna-Monserrath
  • Martínez Cisneros, Cynthia Susana
  • Pandit, Bidhan
  • Lumbier Álvarez, Alejandro
In this work, we propose a processing methodology, based on the combination of tape-casting and low temperature hot-pressing, to develop ceramic NASICON electrolytes with formula Na3.16Zr1.84Y0.16Si2PO12 towards the attainment of solid-state sodium batteries operating at room temperature. Solid-state NASICON electrolytes with very good mechanical properties and high ionic conductivity are successfully tested in terms of electrochemical behavior by using the cell configuration: Na/NASICON/FePO4. Following charge-discharge cycles, an unusual redox pair of FePO4 is found, indicating that the all-solid-state battery with the Na metal anode may be effectively operated at room temperature. At a charge/discharge current density of C/20, the solid-state battery has an initial reversible discharge capacity of 85 mAh/g. Because of its relatively high ionic conductivity and thermostability, when in contact with the Na anode and the FePO4 cathode, the NASICON ceramic electrolyte is a viable option for attaining reliable, safer and sustainable all-solid-state batteries operating at room temperature., The authors would like to thank the Agencia Española de Investigación/Fondo Europeo de Desarrollo Regional (FEDER/UE) for funding the projects PID2019-106662RBC43. This work has been supported by the Madrid Government (Comunidad de Madrid-Spain) through three projects: 1) the Multiannual Agreement with UC3M (“Fostering Young Doctors Research”, CIRENAICA-CM-UC3M), and in the context of the VPRICIT (Research and Technological Innovation Regional Programme); 2) the Multiannual agreement with UC3M (“Excelencia para el Profesorado Universitario” - EPUC3M04) - Fifth regional research plan 2016–2020; 3) DROMADER-CM (Y2020/NMT6584). B.P. also acknowledge the CONEX-Plus programme funded by Universidad Carlos III de Madrid (UC3M) and the European Commission through the Marie-Sklodowska Curie COFUND Action (Grant Agreement No 801538). Funding for APC: Universidad Carlos III de Madrid (Read & Publish Agreement CRUE-CSIC 2023).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Regulated electrochemical performance of manganese oxide cathode for potassium-ion batteries: A combined experimental and first-principles density functional theory (DFT) investigation

  • Pandit, Bidhan
  • Rondiya, Sachin R.
  • Shaikh, Shoyebmohamad F.
  • Ubaidullah, Mohd
  • Amaral, Ricardo
  • Dzade, Nelson Y.
  • Goda, Emad S.
  • Rana, Abu Ul Hassan Sarwar
  • Gill, Harjot Singh
  • Ahmad, Tokeer
Potassium-ion batteries (KIBs) are promising energy storage devices owing to their low cost, environmental-friendly, and excellent K+ diffusion properties as a consequence of the small Stoke's radius. The evaluation of cathode materials for KIBs, which are perhaps the most favorable substitutes to lithium-ion batteries, is of exceptional importance. Manganese dioxide (alfa-MnO2) is distinguished by its tunnel structures and plenty of electroactive sites, which can host cations without causing fundamental structural breakdown. As a result of the satisfactory redox kinetics and diffusion pathways of K+ in the structure, alfa-MnO2 nanorods cathode prepared through hydrothermal method, reversibly stores K+ at a fast rate with a high capacity and stability. It has a first discharge capacity of 142 mAh/g at C/20, excellent rate execution up to 5C, and a long cycling performance with a demonstration of moderate capacity retention up to 100 cycles. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) simulations confirm that the K+ intercalation/deintercalation occurs through 0.46 K movement between MnIV/MnIII redox pairs. First-principles density functional theory (DFT) calculations predict a diffusion barrier of 0.31 eV for K+ through the 1D tunnel of alfa-MnO2 electrode, which is low enough to promote faster electrochemical kinetics. The nanorod structure of alfa-MnO2 facilitates electron conductive connection and provides a strong electrode&#8211;electrolyte interface for the cathode, resulting in a very consistent and prevalent execution cathode material for KIBs., The CONEX-Plus programme, supported by Universidad Carlos III de Madrid (UC3M) and the European Commission through the Marie Sklodowska Curie COFUND Action (Grant Agreement No 801538), is acknowledged by Bidhan Pandit. SRR acknowledges the support of the Department of Materials Engineering, Indian Institute of Science (IISc), Bengaluru, India. The authors are thankful to Abdolkhaled Mohammadi, Université de Montpellier (France) for his assistance with this project. The authors extend their sincere appreciation to the Researchers Supporting Project number (RSP-2021/370), King Saud University, Riyadh, Saudi Arabia for the financial support. SRR and NYD acknowledge the UK Engineering and Physical Sciences Research Council (EPSRC) for funding (Grant EP/S001395/1). RA and NYD acknowledge the support of the College of Earth and Minerals Sciences and the John and Willie Leone Family Department of Energy and Mineral Engineering of the Pennsylvania State University. Computer simulations for this work were performed on the Roar Supercomputer of the Pennsylvania State University. Authors acknowledge Universidad Carlos III de Madrid (Read & Publish Agreement CRUE-CSIC 2022) for funding the article processing charge (APC) to make this article open access.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Dual-Wavelength-Modulation mm-Wave and THz Systems: Analysis and Experimental Demonstration At 60 GHz With a Gain-Switched Laser

  • González Guerrero, Luis
  • Delmade, Amol
  • Dass, Devika
  • Browning, Colm
  • Barry, Liam P.
  • Smyth, Frank
  • Lamela Rivera, Horacio
  • Carpintero del Barrio, Guillermo
Dual-wavelength-modulation (dual-λ-mod) photonic mm-wave/THz transmitters are an attractive alternative to conventional heterodyne systems for their simplicity. In this article, dual-λ-mod systems are analysed, paying special attention to the impact of fiber dispersion and signal-signal beat interference. In contrast to what has been reported in the literature, it is concluded here that dual-λ-mod systems based on optical double sideband (DSB) modulation are subjected to power fading, rendering them useless for high-speed mm-wave/THz communications. To solve this, the use of optical single sideband (SSB) modulation – which is immune to power fading – is proposed here. Using a gain-switched (GS) laser, a 60-GHz SSB dual-λ-mod system transmitting 2.5-GBd 16- QAM signals is demonstrated experimentally. A penalty of around 2.8 dB is measured with respect to the conventional dual-path heterodyne transmitter over optical B2B and 10-km transmission. The reduction in complexity enabled by the demonstrated system aids in the deployment of cost-effective mm-wave/THz networks, This work was supported in part by UC3M and the European Commission under Grants GA 801538 and 101096949, in part by the Spanish Ministry of economic affairs and Digital Transformation under Grant TSI-063000-2021-136, and in part by Science Foundation Ireland under Grants 18/SIRG/5579, 13/RC/2077/p2, and 12/RC/2276/P2.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

A Compact CPW-Fed Ultra-WidebandMulti-Input-Multi-Output (MIMO) Antenna for Wireless Communication Networks

  • Ahmad, Sarosh
  • Khan, Shahid
  • Manzoor, Bilal
  • Soruri, Mohammad
  • Alibakhshikenari, Mohammad
  • Dalarsson, Mariana
  • Falcone, Francisco
In this article, a compact coplanar waveguide (CPW) technique based ultra-wideband multipleinput- multiple-output (MIMO) antenna is proposed. The design is characterized by a broad impedance bandwidth starting from 3 GHz to 11 GHz. The overall size of the MIMO design is 60 x 60 mm2 (1.24 x 1.24 g2 g @ 3 GHz) with a thickness of 1.6 mm. To make the design ultra-wideband, the proposed MIMO antenna design has four jug-shaped radiating elements. The design is printed on a FR-4 substrate (relative permittivity of er = D 4:4 and loss tangent of tand D 0:025). The polarization diversity phenomenon is realized by placing four antenna elements orthogonally. This arrangement increases the isolation among the MIMO antenna elements. The simulated results of the ultra-wideband MIMO antenna are verified by measured results. The proposed MIMO antenna has a measured diversity gain greater than 9.98, envelope correlation coefficient (ECC) less than 0.02, and good MIMO performance where the isolation is more than -20dB between the elements. The group delay, channel capacity loss (CCL), and the total active reflection coefficient (TARC) multiplexing efsiciency and mean effective gain results are also analyzed. The group delay is found to be less than 1.2ns, CCL values calculated to be less than 0.4 bits/sec/Hz, while the TARC is below -10dB for the whole operating spectrum. The proposed design is a perfect candidate for ultrawideband wireless communication systems and portable devices., This work was supported in part by the Universidad Carlos III de Madrid and the European Union's Horizon 2020 Research and Innovation Program under the Marie Sklodowska-Curie Grant 801538, and in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE) under Grant RTI2018-095499-B-C31.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

An ultrasensitive molecularly imprinted polymer-based electrochemical sensor for the determination of SARS-CoV-2-RBD by using macroporous gold screen-printed electrode

  • Amouzadeh Tabrizi, Mahmoud
  • Fernández Blázquez, Juan Pedro
  • Mojena Medina, Dahiana
  • Acedo Gallardo, Pablo
Herein, a novel molecularly imprinted polymer (MIP) based electrochemical sensor for the determination of the receptor-binding domain of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2-RBD) has been developed. For this purpose, first, a macroporous gold screen-printed electrode (MP-Au-SPE) has been fabricated. The MIP was then synthesized on the surface of the MP-Au-SPE through the electro-polymerization of ortho-phenylenediamine in the presence of SARS-CoV-2-RBD molecules as matrix polymer, and template molecules, respectively. During the fabrication process, the SARS-CoV-2-RBD molecules were embedded in the polymer matrix. Subsequently, the template molecules were removed from the electrode by using alkaline ethanol. The template molecules removal was studied using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDX), and attenuated total reflectance spectroscopy (ATR). The fabricated MIP film acted as an artificial recognition element for the measurement of SARS-CoV-2-RBD. The EIS technique was used for the measurement of the SARS-CoV-2-RBD in the saliva solution. The electron transfer resistance (Ret) of the MIP-based sensor in a ferri/ferrocyanide solution increased as the SARS-CoV-2-RBD concentration increased due to the occupation of the imprinted cavities by the SARS-CoV-2-RBD. The MIP-based sensor exhibited a good response to the SARS-CoV-2-RBD in the concentration range between 2.0 and 40.0 pg mL-1 with a limit of detection of 0.7 pg mL-1. The obtained results showed that the fabricated MIP sensor has high selectivity sensitivity, and stability., This project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 801538. The authors would like to thank the characterization services of the ICTP-CSIC for the AFM measurements of the sample.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Performance analysis of UAV-assisted wireless powered sensor network over shadowed κ − μ fading channels

  • Milovanovic, Ivan
  • Stefanovic, Caslav
In this work, we analyze performances of the unmanned aerial vehicle- (UAV-) assisted wireless powered sensor communication, where sensor transmission ability is supported by the UAV. Harvested energy from the UAV-broadcasted signal is further used at the sensor nodes for uplink information transmission to the UAV, over assumed shadowed κ − μ fading channels. Here, we observe a general scenario in which due to the flight conditions of the UAV, the channels content include the LOS components affected by the shadowing effect, modeled by the general shadowed κ − μ channel model, which can be reduced to other well-known channel models as its special cases. We derive closed-form expressions for the outage probability (OP) of such wireless sensor network (WSN) operating in shadowed κ − μ fading environments. Further, we analyze the optimization of time allocation to minimize OP subjected to UAV's energy constraints. The impact of channel parameters on observed performance measures is analyzed, and obtained results are numerically validated., Caslav Stefanovic would like to acknowledge CONEX-Plus programme. The CONEX-Plus is funded by UC3M, the European Commission through the Marie Sklodowska Curie COFUND Action (H2020-MSCA-COFUND-2017- GA 801538).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Precoded Large Scale Multi-User-MIMO System Using Likelihood Ascent Search for Signal Detection

  • Bagadi, Kalapraveen
  • Ravikumar, Chinthaginjala V.
  • Alibakhshikenari, Mohammad
  • Challa, Nagahaj
  • Rajesh, Anbazhagan
  • Aïssa, Sonia
  • Dayoub, Iyad
  • Falcone, Francisco
  • Limiti, Ernesto
Multiple antennas at each user equipment (UE) and/or thousands of antennas at the base station (BS) comprise the extremely spectrum efficient large scale multi-user multiple input multiple output system (BS). Due to space constraints, the closely spaced numerous antennas at each UE may cause inter antenna interference (IAI). Furthermore, when one UE comes into contact with another UE in the same cellular network, multi-user interference (MUI) may be introduced to the received signal. To mitigate IAI, efficient precoding pre-coding is necessary at each UE, and the MUI present at the BS can be canceled by efficient Multi-user Detection (MUD) techniques. The majority of earlier literature deal with one or more of these interferences. This paper implements a joint pre-coding and MUD, Lenstra-Lovasz (LLL) based Lattice Reduction (LR) assisted likelihood accent search (LAS) (LLL-LR-LAS), to mitigate IAI and MUI simultaneously LLL-based LR pre-coding mitigates IAI at each UE, and the LAS algorithm is a neighborhood search-based MUD that cancels BS MUI. The proposed approaches' performance was evaluated using Bit Error Rate analysis, and their complexity were determined using multiplication and addition., Dr. Mohammad Alibakhshikenari acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant agreement No. 801538. Also, this work was supported by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional-FEDER-, European Union) under the research Grant PID2021-127409OB-C31 CONDOR. Funding for APC: Universidad Carlos III de Madrid (Read & Publish Agreement CRUE-CSIC 2022).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Disruption in times of COVID-19? The hybrid film festival format

  • Smits, Roderik Charles
The first waves of the COVID-19 pandemic had unprecedented implications for cultural sectors. With film festivals, music concerts and other cultural events being postponed or even cancelled, there was an urgency to respond to changing circumstances. Cultural events increasingly relied on hybrid or online formats to remain accessible for audiences. Because such formats caused controversy about programming and release strategies, they were easily conceived of as having a disruptive impact on cultural sectors. This paper puts such assumptions about disruption into question. It focuses on the film festival sector, which is increasingly invested in strategies of online accessibility and audience reach. The research is specifically based on the hybrid festival format. Drawing on case studies of hybrid film festivals such as London, Ghent and Rotterdam, it argues that their strategies and operations should be understood from the perspective of cultural change rather than disruption., I acknowledge support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Thermo-economic assessment and optimization of an innovative tri-generation system using supercritical CO2 power system and LNG cold energy recovery

  • Yousef Mohamed, Mohamed Samir
  • Santana Santana, Domingo José
The present study introduces a novel tri-generation system that is highly efficient and cost-effective, employing a supercritical CO2 (sCO2) Brayton cycle as the primary mover and harnessing the cooling potential from liquefied natural gas (LNG) as a heat sink. This innovative system simultaneously provides electricity, cooling, and hydrogen. By capitalizing on the substantial temperature difference between the high-temperature sCO2 power cycle and the low-temperature LNG cold source, an integrated combination of the Kalina cycle (KC) and organic Rankine cycle (ORC) is utilized. Additionally, the system incorporates a proton exchange membrane electrolyzer (PEME) and an absorption refrigeration cycle (ARC) to create a highly efficient trigeneration system. The system is rigorously evaluated through energy, exergy, and exergoeconomic analyses, which are critical for assessing performance. Additionally, this study conducts a parametric investigation to elucidate the impact of key parameters on system performance. Furthermore, optimization is performed using a genetic algorithm (GA), with the objective of maximizing energy and exergy efficiencies or minimizing the overall product cost. Results from the baseline scenario demonstrate impressive energy and exergy efficiencies of 54.38 % and 59.46 % respectively, along with a low total product unit cost of 11.642 ($/GJ), outperforming existing benchmarks in the literature. The system also provides substantial net power output, cooling capacity, and hydrogen production rates of 276.71 MW, 60.19 MW, and 176.25 kg/h, respectively. This combination of high performance and cost-effectiveness makes the proposed system a versatile choice, underscoring its significance in sustainable and environmentally friendly energy solutions., The researcher (Mohamed S. Yousef) acknowledges support from the CONEX-Plus program funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Modeling dynamic formability of porous ductile sheets subjected to biaxial stretching: Actual porosity versus homogenized porosity

  • Nieto Fuentes, Juan Carlos
  • Jacques, N.
  • Marvi Mashhadi, Mohammad
  • N Souglo, Komi Espoir
  • Rodríguez-Martínez, José A.
This paper investigates the effect of porous microstructure on the necking formability of ductile sheets subjected to dynamic in-plane stretching. We have developed an original approach in which finite element calculations which include actual void distributions obtained from additively manufactured materials are compared with simulations in which the specimen is modeled with the Gurson–Tvergaard continuum plasticity theory (Gurson, 1977; Tvergaard, 1982) which considers porosity as an internal state variable. A key point of this work is that in the calculations performed with the continuum model, the initial void volume fraction is spatially varied in the specimen according to the void distributions included in the simulations with the actual porous microstructure. The finite element computations have been carried out for different loading conditions, with biaxial strain ratios ranging from 0 (plane strain) to 0.75 (biaxial tension) and loading rates varying between 10000 s −1 and 60000 s −1. We have shown that for the specific porous microstructures considered, the necking forming limits obtained with the Gurson–Tvergaard continuum model are in qualitative agreement with the results obtained with the calculations which include the actual void distributions, the quantitative differences for the necking strains being generally less than ≈ 25% (the calculations with actual voids systematically predict greater necking strains). In addition, the spatial distribution of necks formed in the sheets at large strains is very similar for the actual porosity and the homogenized porosity models. The obtained results demonstrate that the voids promote plastic localization, acting as preferential sites for the nucleation of fast growing necks. Moreover, the simulations have provided individualized correlations between void volume fraction, maximum void size and necking formability, and highlighted the influence of the heterogeneity of the spatial distribution of porosity on plastic localization., The research leading to these results has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme. Project PURPOSE, grant agreement 758056. J. C. Nieto-Fuentes acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme, under the Marie Sklodowska-Curie grant agreement 801538. J. A. Rodríguez-Martínez acknowledges the financial support provided by the Spanish Ministry of Science and Innovation under the programme Proyectos I+D Excelencia 2017. Project APPLIED, DPI2017-88608-P.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Flexible solvent-free polymer electrolytes for solid-state Na batteries

  • Martínez Cisneros, Cynthia Susana
  • Pandit, Bidhan
  • Levenfeld Laredo, Belén
  • Lumbier Álvarez, Alejandro
  • Sánchez, Jean Yves
Post-lithium batteries, based on alkaline and alkaline earth elements, are cheaper technologies with the potential to produce disruptive changes in the transition towards cleaner and sustainable energy sources less dependent on fossil fuels. This contribution deals with the development and characterization of sodium-conducting solvent-free polymer electrolytes towards the attainment of Sodium Polymer Batteries. Obtained via the polycondensation of α, ω-dihydroxy-oligo(oxyethylene) with an unsaturated dihalide, whose further curing leads to amorphous networked electrolyte films. Using NaClO4 and NaCF3SO3 at different O/Na ratios, the best polymer electrolyte reaches a cationic conductivity (σ+) exceeding 1 mS cm−1 at 90 °C whereas maintaining mechanical integrity up to at least 120 °C., The authors would like to thank the Agencia Española de Investigación/Fondo Europeo de Desarrollo Regional (FEDER/UE) for funding the project PID2019-106662RBC43. This work has been supported by the Madrid Government (Comunidad de Madrid-Spain) through three projects: 1) the Multiannual Agreement with UC3M ("Fostering Young Doctors Research", CIRENAICA-CM-UC3M), and in the context of the VPRICIT (Research and Technological Innovation Regional Programme); 2) the Multiannual agreement with UC3M ("Excelencia para el Profesorado Universitario" - EPUC3M04) - Fifth regional research plan 2016-2020; 3) DROMADER-CM (Y2020/NMT6584). B.P. and A.V. acknowledge support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Interacting color strings as the origin of the liquid behavior of the quark-gluon plasma

  • Ramirez, J.E.
  • Díaz Jiménez, Bogar
  • Pajares, C.
We study the radial distribution function of the color sources (strings) formed in hadronic collisions and the requirements to obtain a liquid. As a repulsive interaction is needed, we incorporate a concentric core in the strings as well as the probability that a string allows core-core overlaps. We find systems where the difference between the gas-liquid and confined-deconfined phase transition temperatures is small. This explains the experimentally observed liquid behavior of the quark-gluon plasma above the confineddeconfined transition temperature., J. E. R. acknowledges financial support from Consejo Nacional de Ciencia y Tecnología (postdoctoral fellowship Grant No. 289198). B. D. was partially supported by a DGAPA-UNAM postdoctoral fellowship and acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 programme under the Marie Sklodowska-Curie grant agreement No. 801538. C. P. has received financial support from Xunta de Galicia (Centro singular de investigación de Galicia), by European Union ERDF, and by the “María de Maeztu” Units of Excellence program MDM-2016-0692 and the Spanish Research State Agency. We thank Nestor Armesto and David Vergara for their valuable comments. J. E. R. acknowledges financial support from Consejo Nacional de Ciencia y Tecnología (postdoctoral fellowship Grant No. 289198). B. D. was partially supported by a DGAPA-UNAM postdoctoral fellowship and acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 programme under the Marie Sklodowska-Curie grant agreement No. 801538. C. P. has received financial support from Xunta de Galicia (Centro singular de investigación de Galicia), by European Union ERDF, and by the “María de Maeztu” Units of Excellence program MDM-2016-0692 and the Spanish Research State Agency. We thank Nestor Armesto and David Vergara for their valuable comments., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Classical analogs of the covariance matrix, purity, linear entropy, and von Neumann entropy

  • Díaz Jiménez, Bogar
  • García González, Diego
  • Gutiérrez-Ruiz, Daniel
  • Vergara, J. David
We obtain a classical analog of the quantum covariance matrix by performing its classical approximation for any continuous quantum state, and we illustrate this approach with the anharmonic oscillator. Using this classical covariance matrix, we propose classical analogs of the purity, linear quantum entropy, and von Neumann entropy for classical integrable systems, when the quantum counterpart of the system under consideration is in a Gaussian state. As is well known, this matrix completely characterizes the purity, linear quantum entropy, and von Neumann entropy for Gaussian states. These classical analogs can be interpreted as quantities that reveal how much information from the complete system remains in the considered subsystem. To illustrate our approach, we calculate these classical analogs for three coupled harmonic oscillators and two linearly coupled oscillators. We find that they exactly reproduce the results of their quantum counterparts. In this sense, it is remarkable that we can calculate these quantities from the classical viewpoint., Bogar Díaz acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant Agreement No. 801538. This work was partially supported by DGAPA-PAPIIT Grant No. IN105422.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

A comprehensive survey on 'circular polarized antennas' for existing and emerging wireless communication technologies

  • Nadeem, Iram
  • Alibakhshikenari, Mohammad
  • Babaeian, Fatemeh
  • Althuwayb, Ayman A.
  • Virdee, Bal S.
  • Azpilicueta, Leyre
  • Khan, Salahuddin
  • Huynen, Isabelle
  • Falcone, Francisco
  • Denidni, Tayeb A.
  • Limiti, Ernesto
Circular polarized (CP) antennas are well suited for long-distance transmission attainment. In order to be adaptable for beyond 5G communication, a detailed and systematic investigation of their important conventional features is required for expected enhancements. The existing designs employing millimeter wave, microwave, and ultra-wideband (UWB) frequencies form the elementary platform for future studies. The 3.4–3.8 GHz frequency band has been identified as a worthy candidate for 5G communications because of spectrum availability. This band comes under UWB frequencies (3.1–10.6 GHz). In this survey, a review of CP antennas in the selected areas to improve the understanding of early-stage researchers specially experienced antenna designers has presented for the first time as best of our knowledge. Design implementations involving size, axial ratio, efficiency, and gain improvements are covered in detail. Besides that, various design approaches to realize CP antennas including (a) printed CP antennas based on parasitic or slotted elements, (b) dielectric resonator CP antennas, (c) reconfigurable CP antennas, (d) substrate integrated waveguide CP antennas, (e) fractal CP antennas, (f) hybrid techniques CP antennas, and (g) 3D printing CP antennas with single and multiple feeding structures have investigated and analyzed. The aim of this work is to provide necessary guidance for the selection of CP antenna geometries in terms of the required dimensions, available bandwidth, gain, and useful materials for the integration and realization in future communication systems., This project has received funding from Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant 801538. Also, this work was partially supported by RTI2018-095499-B-C31, Funded by Ministerio de Ciencia,Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Compact broadband antenna with Vicsek fractal slots for WLAN and WiMAX applications

  • Benkhadda, Omaima
  • Ahmad, Sarosh
  • Saih, Mohamed
  • Chaji, Kebir
  • Reha, Abdelati
  • Ghaffar, Adnan
  • Khan, Salahuddin
  • Alibakhshikenari, Mohammad
  • Limiti, Ernesto
This article belongs to the Special Issue Photonic Technologies and Systems Enabling 6G., This paper aims to design a compact broadband antenna for wireless local area network (WLAN) and worldwide interoperability for microwave access (WIMAX) applications. The suggested antenna consists of an octagonal radiator with Vicsek fractal slots and a partial ground plane, it is printed on FR-4 dielectric substrate, and its global dimension is 50 × 50 × 1.6 mm3. The antenna is designed and constructed using both CST MICROWAVE STUDIO® and CADFEKO electromagnetic solver, and in order to validate the acquired simulation results, the antenna is manufactured and tested using vector network analyzer E5071C. The measurement results show that the designed antenna attains a broadband bandwidth (S11 < −10 dB) from 2.48 to 6.7 GHz resonating at 3.6 and 5.3 GHz, respectively. The broadband bandwidth covers the two required bands: WiMAX at the frequencies 2.3/2.5/3.3/3.5/5/5.5 GHz and WLAN at the frequencies 3.6/2.4–2.5/4.9–5.9 GHz. In addition, the suggested antenna provides good gains of 2.78 dBi and 5.32 dBi, omnidirectional measured radiation patterns in the E-plane and the H-plane and high efficiencies of 88.5% and 84.6% at the resonant frequencies. A close agreement of about 90% between simulation and measurement results is noticed., The authors appreciate the funding from Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant 801538. In addition the partial support from the Researchers Supporting Project number (RSP-2021/58), King Saud University, Riyadh, Saudi Arabia, is acknowledged.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Metasurface-Inspired Flexible Wearable MIMO Antenna Array for Wireless Body Area Network Applications and Biomedical Telemetry Devices

  • Althuwayb, Ayman A.
  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Rashid, Nasr
  • Kaaniche, Khaled
  • Atitallah, Ahmed Ben
  • Armghan, Ammar
  • Elhamrawy, Osama I.
  • See, Chan Hwang
  • Falcone, Francisco
This article presents a sub-6GHz ISM-band flexible wearable MIMO antenna array for wireless body area networks (WBANs) and biomedical telemetry devices. The array is based on metasurface inspired technology. The antenna array consists of 2 × 2 matrix of triangular-shaped radiation elements that were realized on 0.8 mm thick Rogers RT/duroid 5880 substrate. Radiation characteristics of the array are enhanced by isolating the surface current interaction between the individual radiators in the array. This is achieved by inserting an electromagnetic bandgap (EBG) decoupling structure between the radiating elements. The radiating elements were transformed into a metasurface by etching sub-wavelength slots inside them. The periodic arrangement of slots acts like resonant scatterers that manipulate the electromagnetic response of the surface. Results confirm that by employing the decoupling structure and sub-wavelength slots the isolation between the radiators is significantly improved (>34.8 dB). Moreover, there is an improvement in the array’s fractional bandwidth, gain and the radiation efficiency. The optimized array design for operation over 5.0-6.6 GHz has an average gain and efficiency of 10 dBi and 83%, respectively. Results show that the array’s performance is not greatly affected by a certain amount of bending. In fact, the antenna maintains a gain between 8.65-10.5 dBi and the efficiency between 77-83%. The proposed MIMO antenna array is relatively compact, can be easily fabricated on one side of a dielectric material, allows easy integration with RF circuitry, is robust, and maintains its characteristics with some bending. These features make it suitable for various wearable applications and biomedical telemetry devices., This work was funded by the Deanship of Scientific Research at Jouf University under Grant Number (DSR2022-RG-0110). Besides that, Dr. Mohammad Alibakhshikenari acknowledges support from the CONnecting EXcellence (CONEX)-Plus programme funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538. In addition, this work was supported by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional -FEDER-, European Union) under the research grant PID2021-127409OB-C31 CONDOR.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Photonic controlled metasurface for intelligent antenna beam steering applications including 6G mobile communication systems

  • Muqdad, Zainab S
  • Alibakhshikenari, Mohammad
  • Elwi, Taha A.
  • Abdul Hassain, Zaid A.
  • Virdee, Bal. S.
  • Sharma, Richa
  • Khan, Salahuddin
  • Türker Tokan, Nurhan
  • Livreri, Patrizia
  • Falcone, Francisco
  • Limiti, Ernesto
This paper presents a novel microwave sensor using optical activation for measuring in real-time the water contamination in crude oil or its derivatives. The sensor is constructed from an end-coupled microstrip resonator that is interconnected to two pairs of identical fractal structures based on Moore curves. Electromagnetic (EM) interaction between the fractal curves is mitigated using a T-shaped microstrip-stub to enhance the performance of the sensor. The gap in one pair of fractal curves is loaded with light dependent resistors (LDR) and the other pair with microwave chip capacitors. The chip capacitors were used to increase the EM coupling between the fractal gaps to realize a high Q-factor resonator that determines the sensitivity of the sensor. Empirical results presented here show that the insertion-loss of the sensor is affected by the change in LDR impedance when illuminated by light. This property is used to determine the amount of water contaminated oil. The sensitivity of the sensor was optimized using commercial 3D EM solver. The measurements were made by placing a 30 mm diameter petri dish holding the sample on top of the sensor. The petri dish was filled up to a height of 10 mm with the sample of water contaminated crude oil, and the measurements were done in the range between 0.76 GHz and 1.2 GHz. The Q-factor of the oil sample with no water contamination was 70 and the Q-factor declined to 20 for 100% contamination. The error in the measurements was less than 0.024%. The sensor has dimensions of 0.127λo × 0.127λo × 0.004 λo and represents a new modality. Compared to existing techniques, the proposed sensor is simple to use, readily portable and is more sensitive., The authors also sincerely appreciate funding from Researchers Supporting Project number (RSP2023R58), King Saud University, Riyadh, Saudi Arabia. Additionally, this work was supported by Ministerio de Ciencia, Innovacion y Universidades, Gobierno de Espana (Agencia Estatal de Investigacion, Fondo Europeo de Desarrollo Regional -FEDER-, European Union) under the research grant PID2021-127409OB-C31 CONDOR. Besides above, the Article Processing Charge (APC) was afforded by Universidad Carlos III de Madrid (Read & Publish Agreement CRUE-CSIC 2023).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

High Performance Antenna System in MIMO Configuration for 5G Wireless Communications Over Sub-6 GHz Spectrum

  • Iftikhar ud Din,
  • Alibakhshikenari, Mohammad
  • Virdee, B. S
  • Ullah, S.
  • Ullah, S.
  • Akram, M. R
  • Ali, S. M.
  • Livreri, P
  • Limiti, E.
Dr. Mohammad Alibakhshikenari acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538. The authors also sincerely appreciate funding from Researchers Supporting Project number (RSPD2023R699), King Saud University, Riyadh, Saudi Arabia. Besides above, the Article Processing Charge (APC) was afforded by Universidad Carlos III de Madrid (Agreement CRUE-Madroño 2023)., This paper presents a high-performance multiple input and multiple output (MIMO) antenna comprising 2 × 2 configuration of radiating elements that is designed for sub-6 GHz applications. The proposed MIMO antenna employs four identical radiating elements. High isolation between the radiating elements and therefore reduced mutual coupling is achieved by spatially arranging the radiating elements in an orthogonal configuration. Also, a novel frequency selective surface (FSS) was employed to increase the gain of the MIMO antenna over a wide bandwidth from 3 to 6 GHz. This was achieved by locating the FSS above the antenna at a certain height. The FSS essentially enhanced the antenna's directivity, reduced back lobe radiation and mutual coupling. The antenna was fabricated on a standard Rogers RT Duroid 5880 dielectric substrate with a 0.8 mm thickness. The overall dimension of the MIMO antenna is 50 × 50 × 12.5 mm3 and it operates from 3.8 to 6 GHz, which corresponds to a fractional bandwidth of 41%. The proposed MIMO antenna has a measured peak gain of 4.8 dBi and inter radiation element isolation >20 dB. Its envelope correlation coefficient is less than 0.1 and diversity gain >9.9 (dB). These characteristics make the proposed MIMO antenna system suitable for 5G communication systems., Mohammad Alibakhshikenari acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538. The authors also sincerely appreciate funding from Researchers Supporting Project number (RSPD2023R699), King Saud University, Riyadh, Saudi Arabia. Besides above, the Article Processing Charge (APC) was afforded by Universidad Carlos III de Madrid (Agreement CRUE-Madroño 2023)
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

High performance antenna-on-chip inspired by SIW and metasurface technologies for THz band operation

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Rajaguru, Renu Karthick
  • Iqbal, Amjad
  • See, Chan H.
  • Falcone, Francisco
In this paper, a high-performance antenna-on-chip (AoC) is implemented on gallium arsenide (GaAs) wafer based on the substrate integrated waveguide (SIW) and metasurface (MTS) technologies for terahertz band applications. The proposed antenna is constructed using five stacked layers comprising metal-GaAs-metal-GaAs-metal. The conductive electromagnetic radiators are implemented on the upper side of the top GaAs layer, which has a metallic ground-plane at its underside. The metallic feedline is implemented at the underside of the bottom GaAs layer. Dual wrench-shaped radiators are framed by metallic vias connected to the ground-plane to create SIW cavity. This technique mitigates the surface waves and the substrate losses, thereby improving the antenna's radiation characteristics. The antenna is excited by a T-shaped feedline implemented on the underside of the bottom GaAs substrate layer. Electromagnetic (EM) energy from the feedline is coupled to the radiating elements through the circular and linear slots etched in the middle ground-plane layer. To mitigate the surfacewave interactions and the substrate losses in the bottom GaAs layer, the feedline is contained inside a SIW cavity. To enhance the antenna,s performance, the radiators are transformed into a metamaterialinspired surface (i.e., metasurface), by engraving periodic arrangement of circular slots of subwavelength diameter and periodicity. Essentially, the slots act as resonant scatterers, which control the EM response of the surface. The antenna of dimensions of 400 × 400 × 8 μm3 is demonstrated to operate over a wide frequency range from 0.445 to 0.470 THz having a bandwidth of 25 GHz with an average return-loss of - 27 dB. The measured average gain and radiation efficiency are 4.6 dBi and 74%, respectively. These results make the proposed antenna suitable for AoC terahertz applications., Dr. Mohammad Alibakhshikenari acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538. This work was supported by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional -FEDER-, European Union) under the research grant PID2021-127409OB-C31 CONDOR.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

On-Chip Terahertz antenna array based on amalgamation of metasurface-inspired and artificial magnetic conductor technologies for next generation of wireless electronic devices

  • Alibakhshikenari, Mohammad
  • Virdee, Bal Singh
  • Salekzamankhani, Shahram
  • Babaeian, Fatemeh
  • Ali, Syed Mansoor
  • Iqbal, Amjad
  • Al-Hasan, Muath
The paper presents a feasibility study on an innovative terahertz (THz) on-chip antenna array designed to reliably meet the high-performance connectivity requirements for next generation of wireless devices to enable bandwidth intensive applications, superfast fast streaming, bulk data exchange between internet of things (IoT) devices/smartphones and the development of holographic video conferencing. The significantly smaller wavelength of the THz-band and metasurface-inspired and artificial magnetic conductor (AMC) technologies are exploited here to realize an on-chip antenna. Several experimental on-chip antenna arrays of various matrix sizes were investigated for application at millimeter-wave/Terahertz RF front-end transceivers. The technique proposed here is shown to enhance the antennas impedance bandwidth, gain and radiation efficiency. Purely for experimental purposes a 2 × 24 radiation element array was fabricated. It exhibits an average measured gain of 20.36 dBi and radiation efficiency of 37.5% across 0.3-0.314 THz. For proof of the concept purposes a THz receiver incorporating the proposed on-chip antenna was modelled. The results show that with the proposed antenna array a THz receiver can provide a gain of 25 dB when the antenna is directly matched to low-noise amplifier stage., Dr. Mohammad Alibakhshikenari acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation pro-gramme under the Marie Sklodowska-Curie grant agreement No. 801538. The authors also sincerely appreciate funding from Researchers Supporting Project number (RSPD2023R699), King Saud University, Riyadh, Saudi Arabia. Besides above, the Article Processing Charge (APC) was afforded by Universidad Carlos III de Madrid (Read & Publish Agreement CRUE-CSIC 2023)., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Gamispotify: a gamified social music recommendation system based on users' personal values

  • Hajarian, Mohammad
  • Herrera Carrillo, Miguel
  • Díaz, Paloma
  • Aedo Cuevas, Ignacio
In this article, we have introduced Gamispotify. For the first time, in a social network-based environment, and by benefiting from gamification and crowdsourcing, Gamispotify recommends music to the users based on their personal values. The proposed method has been compared to another published article by conducting two experiments and surveys on 32 application participants. Experimental results indicate that user engagement has significantly increased using the proposed method. Spending time on the application increased by 299.48%, the music play count increased by 150%, and receiving music recommendations increased by 244.41%. Statistical analysis using the Wilcoxon Signed-Rank Test confirmed these improvements were significant (p < 0.05). Moreover, survey results support these findings and show a notable increase in user satisfaction with the proposed music recommendation system compared with the previous work (p = 0.019). It also indicates that the proposed method successfully motivated users to discover new songs (p = 0.043). We have also found that social networking features, recommendations based on personal values, and gamification have positively impacted the users’ motivation to use the music streaming application., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. H2020 Marie Skłodowska-Curie Actions,801538,Mohammad Hajarian
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Use of a real-life practical context changes the relationship between implicit body representations and real body measurements

  • Coster, Lize de
  • Sánchez Herrero, Pablo
  • Moreno López, Jorge
  • Tajadura Jiménez, Ana
A mismatch exists between people’s mental representations of their own body and their real body measurements, which may impact general well-being and health. We investigated whether this mismatch is reduced when contextualizing body size estimation in a real-life scenario. Using a reverse correlation paradigm, we constructed unbiased, data-driven visual depictions of participants’ implicit body representations. Across three conditions—own abstract, ideal, and own concrete body participants selected the body that looked most like their own, like the body they would like to have, or like the body they would use for online shopping. In the own concrete condition only, we found a significant correlation between perceived and real hip width, suggesting that the perceived/real body match only exists when body size estimation takes place in a practical context, although the negative correlation indicated inaccurate estimation. Further, participants who underestimated their body size or who had more negative attitudes towards their body weight showed a positive correlation between perceived and real body size in the own abstract condition. Finally, our results indicated that different body areas were implicated in the different conditions. These findings suggest that implicit body representations depend on situational and individual differences, which has clinical and practical implications., LDC was supported by Ministerio de Ciencia, Innovación y Universidades Juan de la Cierva-Incorporación Grant IJC2018-038347-I and the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 801538. ATJ was supported by Ministerio de Economía, Industria y Competitividad of Spain Ramón y Cajal Grant RYC-2014-15421. This research was partly funded by the Spanish Agencia Estatal de Investigación (PID2019-105579RB I00/AEI/10.13039/501100011033). The authors would like to thank Martin Mojica-Benavides for his help in preparing the psychometric curve analyses.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Impact of a mechanical attachment on the preheating temperatures of a central receiver tube

  • Pérez Álvarez, Rafael
  • Cano Pleite, Eduardo
  • Santana Santana, Domingo José
  • Acosta Iborra, Antonio
The receiver tubes of Solar Power Tower plants are typically attached through clips and sliding rods to the reradiating wall of the receiver in order to reduce the thermal deflection of the tubes. However, as a side effect, these mechanical attachments increase heat dissipation from the tube to the exterior and can reduce the local temperature of the tube during the receiver start-up, an operation performed every morning or after a severe drop of solar irradiation due to passing clouds. In the start-up operation, the empty tubes of molten salt receivers must be preheated with a careful aiming sequence of the heliostat field until their temperature is high enough to avoid the freezing of the incoming flow of the molten salt. This work numerically addresses for the first time the influence of the mechanical attachment on the preheating temperature of a receiver tube. To achieve this goal, a set of three-dimensional thermal fluid simulations of the temperature distribution in the tube and the mechanical attachment, described with different levels of detail, has been performed for the receiver of the Gemasolar Solar Power Tower plant. The results of this work show that the mechanical attachment locally affects the tube temperature, leading to a temperature overestimation above 25.1% when the tube is modeled without a mechanical attachment. In addition, the temperature measured separated from the attachment at the rear face of the tube to control the preheating sequence may not be very representative of the minimum tube temperature, which occurs in the internal face of tube just beneath the mechanical attachment. The results indicate that accumulation of heat not only by the clip but also by the guide and the rod of the mechanical attachment plays a significant role in the dissipation of heat from the tube to the attachment. This reveals the need of considering all the elements of the mechanical attachment if an accurate modeling of the preheat temperatures of the tube is needed. Besides, the use of a simplification in the modeling of the air and radiative heat transfer outside the tube reduces by a factor of 4.9 the computational cost involved in a full simulation of these transfer processes, with a temperature discrepancy between models below 14.3%. Finally, the effect of the size of the attachment clip on the minimum tube temperature is investigated, revealing that the minimum tube temperature of the preheated tube can decrease below the freezing temperature of the molten salt for clip heights larger than 170 mm., The authors gratefully acknowledge the financial support provided by Spanish Government through project RTI2018-096664-B-C21 (FEDER/Ministerio de Ciencia e Innovación-Agencia Estatal de Investigación). Eduardo Cano-Pleite acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 programme under the Marie Sklodowska-Curie grant agreement No. 801538 and the financial support of the Spanish Government under the project PID2019-109224RA-I00.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Uni-Planar MIMO Antenna for Sub-6 GHz 5G Mobile Phone Applications

  • Rafique, Umair
  • Khan, Suleman
  • Ahmed, Muhammad Mansoor
  • Kiani, Saad Hassan
  • Abbas, Syed Muzahir
  • Saeed, Sohail Imran
  • Alibakhshikenari, Mohammad
  • Dalarsson, Mariana
This article presents the design of a uni-planar MIMO antenna system for sub-6 GHz 5G-enabled smartphones. The MIMO antenna designed comprises four loop-shaped radiators placed at each corner of the mobile phone board, which follows the principle of pattern diversity. The single-antenna element resonates at 3.5 GHz, its impedance bandwidth is noted to be 1.28 GHz (3-4.28 GHz) for S11 90%. The isolation of >10 dB between antenna elements is achieved for the MIMO configuration. Furthermore, the MIMO antenna designed provides enough radiation coverage to support different sides of the mobile phone board, which is an important feature for future 5G-enabled handsets. In addition, the impacts of human hands and heads on MIMO antenna performance are investigated, and acceptable performance in the data and conversation modes is observed., The authors sincerely appreciate the support from Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant 801538
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Second Order Statistics of -Fisher-Snedecor Distribution and Their Application to Burst Error Rate Analysis of Multi-Hop Communications

  • Stefanovic, Caslav
  • García-Armada, Ana
  • Costa-Pérez, Xavier
An advantage of using the composite fading models (CFMs) is their ability to concurrently address the impact of multi-path and shadowing phenomena on the system performance in wireless communications. A Fisher-Snedecor (FS) F CFM has been recently proposed as an experimentally verified and tractable fading model that can be efficiently applied for 5G and beyond 5G wireless communication systems. This paper provides second-order (s-order) performance analysis of the product of N independent but not identically distributed (i.n.i.d) FS F random variables (RVs). In particular, accurate and closedform approximations for level crossing rate (LCR) and average fade duration (AFD) of the product of N i.n.i.d FS F(N-FS F) RVs are successfully derived by exploiting a general property of a Laplace approximation method for evaluation of the N -folded integral-form LCR expression. Based on the obtained s-order statistical results, the burst error rate and maximum symbol rate of the N -FS F distribution are addressed and thoroughly examined. The numerical results of the considered performance measures are discussed in relation to the N-FS F multi-path and shadowing severity parameters. Moreover, the impact of the number of hops (N) of the N -FS F CFM on the s-order metrics, the burst error rate and maximum symbol rate are numerically evaluated and investigated. The derived s-order statistical results can be used to address the cooperative relay-assisted (RA) communications for vehicular systems. Monte-Carlo (M - C) simulations for the addressed statistical measures are developed in order to confirm the provided theoretical results., This work was supported in part by UC3M and the European Union's Horizon 2020 Programme under the Marie Sklodowska-Curie Grant through the CONEX-Plus Project under Agreement 801538; in part by the IRENE-EARTH Project under Grant PID2020-115323RB-C33/AEI/10.13039/501100011033; in part by ERDF and the Spanish Government Projects under Grant PID2019-106808RA-I00 AEI/FEDER, UE; in part by CDTI Cervera Project INTEGRA under Grant CER-20211031; in part by the Secretaria d'Universitats i Recerca de la Generalitat de Catalunya under Project 2017-SGR-00376 and Project Fem IoT under Grant 001-P-001662; in part by the European Commission Project CPSoSaware; and in part by the Cost Actions under Grant CA19111, Grant CA20120, and Grant CA16220., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Impact of plasma polymerized Iodine-Doped thiophene films for enhanced sensing response towards industrial VOCs

  • Nadekar, Baliram
  • Khollam, Yogesh B.
  • Shaikh, Shoyebmohamad F.
  • Trimukhe, Ajinkya
  • Deshmukh, Rajendra
  • Pandit, Bidhan
  • More, Pravin S.
Volatile organic compounds (VOCs) are majorly used in the manufacturing industry and are hazardous to the sustainability of the environment. Polymeric sensors, rather than more traditional metal oxide sensors, are currently taking the lead attention in the greater part of VOC sensing investigations. In polymeric sensors, plasma polymerized thiophene (PPTh) films are being investigated because of their unique properties, wasteless fabrication, and feasibility for commercial mass manufacturing. In the present study, we fabricated PPTh films powered by a 13.6 MHz RF generator with a vacuum level of 10-3 Torr in a home-built plasma system. The gas sensor investigation of PPTh and iodine-doped PPTh samples with various VOCs, such as ethanol, methanol, acetone, benzene, toluene, and dichloromethane, was carried out systematically. The iodine-doped PPTh 10-20 films (48 hr) showed the highest sensitivity for ethanol (∼180) and methanol (∼120) as compared to PPTh for ethanol (∼110) at 1000 ppm gas concentration. A sensitivity degradation study over 60 days revealed the long-term stability of the films in the air. The polar hopping mechanism and decreased charge transport centers after reaction with the hydroxyl group are responsible for resulted sensitivity of iodine-doped PPTh films towards alcohols., This research is funded by the Rajiv Gandhi Science and Technology Commission, Mumbai, Maharashtra, India (File No: RGSTC/File2016/DPP-146/CR-36). The authors are thankful to the University Grant Commission (UGC) New Delhi, India, for financial support in terms of the major research project and also thankful to the Department of Science and Technology (DST) for supporting the Department of Physics, The Institute of Science under the scheme of Fund for Improvement of S & T Infrastructure (FIST). The authors would like to thank the researchers supporting project number (RSP2023R370), King Saud University, Riyadh, Saudi Arabia, for financial support. The authors also sincerely thank KIST School Partnership Project, Seoul, South Korea. Bidhan Pandit acknowledges the CONEX-Plus programme funded by Universidad Carlos III de Madrid (UC3M) and the European Commission through the Marie-Sklodowska Curie COFUND Action (Grant Agreement No 801538). Bidhan Pandit also acknowledges Universidad Carlos III de Madrid (Read & Publish Agreement CRUE-CSIC 2023) for funding the article processing charge (APC) to make this article open access.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Wireless Electromagnetic Radiation Assessment Based on the Specific Absorption Rate (SAR): A Review Case Study

  • Abdul-Al, Mohamed
  • Amar, Ahmed S. I.
  • Elfergani, Issa
  • Littlehales, Richard
  • Ojaroudi Parchin, Naser
  • Al-Yasir, Yasir
  • See, Chan Hwang
  • Zhou, Dawei
  • Abidin, Zuhairiah Zainal
  • Alibakhshikenari, Mohammad
  • Zebiri, Chemseddine
  • Elmegri, Fauzi
  • Abusitta, Musa
  • Ullah, Atta
  • Abdussalam, Fathi M. A.
  • Rodriguez, Jonathan
  • McEwan, Neil J.
  • Noras, James M.
  • Hodgetts, Russell
  • Abd-Alhameed, Raed A.
Employing electromagnetic fields (EMFs) in new wireless communication and sensing technologies has substantially increased the level of human exposure to EMF waves. This paper presents a useful insight into the interaction of electromagnetic fields with biological media that is defined by the heat generation due to induced currents and dielectric loss. The specific absorption rate (SAR) defines the heating amount in a biological medium that is irradiated by an electromagnetic field value. The paper reviews the radio frequency hazards due to the SAR based on various safety standards and organisations, including a detailed investigation of previously published work in terms of modelling and measurements. It also summarises the most common techniques utilised between 1978 and 2021, in terms of the operational frequency spectrum, bandwidth, and SAR values., The European Union’s Horizon 2020 innovation programme under grant agreement H2020- MSCA-ITN-2016 SECRET-722424 and the U.K. Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1 supported this research. This study is also sponsored by the FCT/MEC through national funds and, where applicable, co-financed by the ERDF under the PT2020 Partnership Agreement under the UID/EEA/50008/2020 project. This study is part of the POSITIONII project, which is funded by the European Commission’s Joint Undertaking under the grant number Ecsel-7831132-Postitio-II-2017-IA. Moreover, this paper is also partially funded by British Council “2019 UK-China-BRI Countries Partnership Initiative” programme, with project titled “Adapting to Industry 4.0 oriented International Education and Research Collaboration”. In addition, this project has received funding from Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Edge observables of the Maxwell-Chern-Simons theory

  • Barbero G., J. Fernando
  • Díaz Jiménez, Bogar
  • Margalef Bentabol, Juan
  • Sánchez Villaseñor, Eduardo Jesús
We analyze the Lagrangian and Hamiltonian formulations of the Maxwell-Chern-Simons theory defined on a manifold with boundary for two different sets of boundary equations derived from a variational principle. We pay special attention to the identification of the infinite chains of boundary constraints and their resolution. We identify edge observables and their algebra [which corresponds to the well-known U (1) Kac-Moody algebra]. Without performing any gauge fixing, and using the Hodge-Morrey theorem, we solve the Hamilton equations whenever possible. In order to give explicit solutions, we consider the particular case in which the fields are defined on a 2-disk. Finally, we study the Fock quantization of the system and discuss the quantum edge observables and states., This work has been supported by the Spanish Ministerio de Ciencia Innovación y Universidades-Agencia Estatal de Investigación PID2020-116567GB-C22 grant. B. D. acknowledges support from the CONEX-Plus program funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant Agreement No. 801538. J. M.-B. is supported by the AARMS postdoctoral fellowship, by the NSERC Discovery Grant No. 2018-04873, and the NSERC Grant No. RGPIN-2018-04887. E. J. S. V. is supported by the Madrid Government (Comunidad de Madrid-Spain) under the Multiannual Agreement with UC3M in the line of Excellence of University Professors (EPUC3M23), and in the context of the V PRICIT (Regional Programme of Research and Technological Innovation).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Model architecture can transform catastrophic forgetting into positive transfer

  • Ruiz García, Miguel
The work of McCloskey and Cohen popularized the concept of catastrophic interference. They used a neural network that tried to learn addition using two groups of examples as two different tasks. In their case, learning the second task rapidly deteriorated the acquired knowledge about the previous one. We hypothesize that this could be a symptom of a fundamental problem: addition is an algorithmic task that should not be learned through pattern recognition. Therefore, other model architectures better suited for this task would avoid catastrophic forgetting. We use a neural network with a different architecture that can be trained to recover the correct algorithm for the addition of binary numbers. This neural network includes conditional clauses that are naturally treated within the back-propagation algorithm. We test it in the setting proposed by McCloskey and Cohen and training on random additions one by one. The neural network not only does not suffer from catastrophic forgetting but it improves its predictive power on unseen pairs of numbers as training progresses. We also show that this is a robust effect, also present when averaging many simulations. This work emphasizes the importance that neural network architecture has for the emergence of catastrophic forgetting and introduces a neural network that is able to learn an algorithm., We acknowledge support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

QoT-Aware Tree Selection, Routing, Modulation, and Spectrum Assignment for Filterless EONs over C+L Band

  • Sadegh Ghasrizadeh, Mohammad
  • Arpanaei, Farhad
  • Beyranvand, Hamzeh
Filterless optical networks (FONs) as an economical solution use passive couplers/splitters rather than expensive active filter devices. In this way, after intermediate and destination nodes, lightpaths are dropped and continued, which generates leakage signals in other links and wastes spectrum. Thus, designing efficient resource allocation in FONs by considering the leakage signals and their interfering effects is of utmost importance. On the other hand, a gradual transition from wavelength division multiplexing optical networks to elastic optical networks (EONs) is occurring due to their efficient utilization of spectrum. Furthermore, utilizing the L-band beside the conventional C-band for spectrum assignment offers a wide range of frequency resources. Therefore, in this paper, we propose an integer linear program (ILP) to solve quality of transmission (QoT)-aware tree selection, routing, modulation, and spectrum assignment problems in filterless EONs over the C+L -band. Furthermore, we provide heuristic algorithms to deal with complex large-scale networks. The performance gap of the proposed ILP and heuristic algorithms is evaluated over a small-scale (5-node) network. The results show that the ILP and heuristic algorithms have almost the same performance in terms of spectrum usage and assigned modulation format, and ILP has a slightly higher generalized signal-to-noise-ratio (GSNR) (0.23 dB or 0.8% at optimum launch power). Furthermore, the heuristic algorithms are also examined over a large-scale network (TID region A topology). The results reveal that the GSNR estimation method severely affects the performance in terms of spectrum usage, blocking, and outage. Furthermore, by using the proposed MX5 method, as long as there is a fill margin of approximately 2 dB, there is no outage or blocking over the C+L -band, up to a network throughput of 110 Tbps and conventional C-band transmission with lower throughput (i.e., 40 Tbps). Finally, our extensive numerical results provide a rule of thumb for balancing blocking, outage, spectrum usage, and the number of expensive L-band transponders by selecting the appropriate modulation assignment method., Farhad Arpanaei acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538. The authors would also like to acknowledge the collaboration with EU-funded project FlexSCALE (grant agreement No. 101096909).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Implementation of a miniaturized planar tri-band microstrip patch antenna for wireless sensors in mobile applications

  • Elkorany, Ahmed Saad
  • Mousa, Alyaa Nehru
  • Ahmad, Sarosh
  • Saleeb, Demyana Adel
  • Ghaffar, Adnan
  • Soruri, Mohammad
  • Dalarsson, Mariana
  • Alibakhshikenari, Mohammad
  • Limiti, Ernesto
This article belongs to the Special Issue Applications of Antenna Technology in Sensors., Antennas in wireless sensor networks (WSNs) are characterized by the enhanced capacity of the network, longer range of transmission, better spatial reuse, and lower interference. In this paper, we propose a planar patch antenna for mobile communication applications operating at 1.8, 3.5, and 5.4 GHz. A planar microstrip patch antenna (MPA) consists of two F-shaped resonators that enable operations at 1.8 and 3.5 GHz while operation at 5.4 GHz is achieved when the patch is truncated from the middle. The proposed planar patch is printed on a low-cost FR-4 substrate that is 1.6 mm in thickness. The equivalent circuit model is also designed to validate the reflection coefficient of the proposed antenna with the S11 obtained from the circuit model. It contains three RLC (resistor–inductor–capacitor) circuits for generating three frequency bands for the proposed antenna. Thereby, we obtained a good agreement between simulation and measurement results. The proposed antenna has an elliptically shaped radiation pattern at 1.8 and 3.5 GHz, while the broadside directional pattern is obtained at the 5.4 GHz frequency band. At 1.8, 3.5, and 5.4 GHz, the simulated peak realized gains of 2.34, 5.2, and 1.42 dB are obtained and compared to the experimental peak realized gains of 2.22, 5.18, and 1.38 dB at same frequencies. The results indicate that the proposed planar patch antenna can be utilized for mobile applications such as digital communication systems (DCS), worldwide interoperability for microwave access (WiMAX), and wireless local area networks (WLAN)., The authors appreciate the financial support from Universidad Carlos III de Madridand and the European Union's Horizon 2020 research and innovation program under Marie Sklodowska-Curie Grant 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Gas gun driven dynamic expansion of 3D-printed AlSi10Mg rings

  • Nieto Fuentes, Juan Carlos
  • Virazels, Thomas
  • Jacques, Nicolas
  • Rodríguez-Martínez, José A.
This paper presents a new experimental setup to study dynamic fragmentation of metallic rings manufactured by 3D-printing technology. The ring is inserted over a ductile thin-walled tube which is impacted axially by a conical-nosed cylindrical projectile fired by a single-stage ligh-gas gun. The diameter of the projectile is larger than the internal diameter of the thin-walled tube, which expands as the projectile advances, pushing radially outwards the metallic ring, that eventually breaks into multiple fragments. The impact velocities considered in the present experimental campaign range from 197 m/s to 385 m/s. The AlSi10Mg ring specimens are printed by Selective Laser Melting technique, with an inner diameter of 14 mm and square cross section of 2 × 2 mm2. To obtain time-resolved information on the mechanics of fragmentation, the number of fractures, and the size of the fragments, the tests have been recorded with two-high speed cameras. A tunnel-shaped soft casing made of polymer foam is placed around the specimen to softly recover the ejected fragments, that have been weighted and sized to determine the statistics of the fragments size distribution. In addition, the predictions of the fragmentation theory of Kipp and Grady (1985) for the evolution of the number of fragments with the impact velocity have been compared with the experimental evidence, and an excellent quantitative agreement has been found within the whole range of loading rates investigated. Compared to other available techniques for dynamic fragmentation of rings, in which the expansion of the specimen is driven by electromagnetic or explosive loading, this experimental setup stands out for its simplicity, fast operation, quick assembly, and flexibility to test different engineering materials, which facilitates performing extensive experimental campaigns (34 successful tests have been carried out in this research). To the authors" knowledge, this paper presents the most comprehensive data set to date on the fragmentation of dynamically expanded printed rings, including the first high-resolution video recordings of the formation of multiple cracks throughout the circumference of the samples, and scanning electron microscopy images of the fractures showing the porous microstructure on the cracks surface., The research leading to these results has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Project PURPOSE), grant agreement No. 758056. J. C. Nieto-Fuentes acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme, under the Marie Sklodowska-Curie grant agreement No. 801538
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

A Resource Allocation Algorithm for Collaborative Networks Using Inferred Information

  • Garrido Fernández, David
  • Zhang, Mai
  • Peleato Iñarrea, Borja Manuel
Even with the advent of 5G wireless communications and the millimeter wave spectrum, there will always be crowded frequency bands where multiple uncoordinated networks will have to contend (or collaborate) to squeeze as much throughput as possible while avoiding interference. This work proposes a branch and bound algorithm for maximizing the overall sum rate over multiple interfering networks with a pre-fixed set of offered flows, as well as a heuristic algorithm that individual networks can follow to collaboratively share the available bandwidth with that same objective. The latter algorithm finds a greedy solution by independently optimizing the links and routes for each network, and then refines that solution by discarding inefficient and potentially harmful links. It does not require any direct communication between the networks, relying instead on location estimates which could be inferred from interference powers. Simulation results show that, when the networks have different traffic loads, the proposed algorithm outperforms the original greedy solution as well as those based on partitioning the resources among the networks for their exclusive use., This work was supported in part by the Connecting Excellence (CONEX)-Plus Program funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 Research Innovation Program through the Marie Sklodowska-Curie Grant under Grant 801538, and in part by Comunidad Autónoma de Madrid Atracción de Talento under Grant 2020-T1/TIC-20698.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Adaptive Graph Attention and Long Short-Term Memory-Based Networks for Traffic Prediction

  • Zhu, Taomei
  • López Boada, María Jesús
  • López Boada, Beatriz
While the increased availability of traffic data is allowing us to better understand urban mobility, research on data-driven and predictive modeling is also providing new methods for improving traffic management and reducing congestion. In this paper, we present a hybrid predictive modeling architecture, namely GAT-LSTM, by incorporating graph attention (GAT) and long short-term memory (LSTM) networks for handling traffic prediction tasks. In this architecture, GAT networks capture the spatial dependencies of the traffic network, LSTM networks capture the temporal correlations, and the Dayfeature component incorporates time and external information (such as day of the week, extreme weather conditions, holidays, etc.). A key attention block is designed to integrate GAT, LSTM, and the Dayfeature components as well as learn and assign weights to these different components within the architecture. This method of integration is proven effective at improving prediction accuracy, as shown by the experimental results obtained with the PeMS08 open dataset, and the proposed model demonstrates state-of-the-art performance in these experiments. Furthermore, the hybrid model demonstrates adaptability to dynamic traffic conditions, different prediction horizons, and various traffic networks., This research was funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie Grant Agreement No 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

A Facile Method for the Fabrication of the Microneedle Electrode and Its Application in the Enzymatic Determination of Glutamate

  • Amouzadeh Tabrizi, Mahmoud
Herein, a simple method has been used in the fabrication of a microneedle electrode (MNE). To do this, firstly, a commercial self-dissolving microneedle patch has been used to make a hard-polydimethylsiloxane-based micro-pore mold (MPM). Then, the pores of the MPM were filled with the conductive platinum (Pt) paste and cured in an oven. Afterward, the MNE made of platinum (Pt-MNE) was characterized using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM). To prove the electrochemical applicability of the Pt-MNE, the glutamate oxidase enzyme was immobilized on the surface of the electrode, to detect glutamate, using the cyclic voltammetry (CV) and chronoamperometry (CA) methods. The obtained results demonstrated that the fabricated biosensor could detect a glutamate concentration in the range of 10¿150 µM. The limits of detection (LODs) (three standard deviations of the blank/slope) were also calculated to be 0.25 µM and 0.41 µM, using CV and CA, respectively. Furthermore, the Michaelis¿Menten constant (KMapp) of the biosensor was calculated to be 296.48 µM using a CA method. The proposed biosensor was finally applied, to detect the glutamate concentration in human serum samples. The presented method for the fabrication of the mold signifies a step further toward the fabrication of a microneedle electrode., This project has received funding from the European Union’s Horizon 2020 research and innovation program, under the Marie Sklodowska-Curie grant agreement No 801538.