Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Investigation of the Long-Term Stability of a Local Oscillator Generator Based on InP-Si3N4 Laser Source for Satellite Payloads

  • Zarzuelo García, Alberto
  • César Cuello, Jessica
  • Guzmán Martínez, Robinson Cruzoe
  • González Guerrero, Luis
  • Mitsolidou, Charoula
  • Delgado Mendinueta, José Manuel
  • Timens, Roelof B.
  • Van Dijk, Paulus W.L.
  • Roeloffzen, Chris
  • Martín Jiménez, Fernando
  • Carpintero del Barrio, Guillermo
We report an experimental characterization of the long-term stability of a local oscillator (LO) signal generation module for satellite communications based on the optical heterodyning of two InP/Si3N4 hybrid integrated lasers. Specifically, we analyze simultaneously the wave length drift of both lasers in the optical domain and the electrical drift of the generated radiofrequency(RF) beat between the lasers. We identify the main factors that contribute to the overall drift such as the electrical noise coming from the supply sources, the thermal noise coming from the temperature control unit, and the thermal cross talk between lasers.This investigation compares the stability of an RF signal generated by two approaches. Using two integrated lasers and using acombination of one integrated laser with one external laser. This work also analyzes the difference when lasers are mounted overa standard bread board with a thermally-controlled. The results show that the best approach is to use both integrated lasers on the same chip. We report a 25 GHz RF signal with long-termstability of 30 MHz measured over 10 hours under free-running operation mode. Moreover, we experimentally demonstrate that integrated lasers can be stabilized by using injection locking. We experimentally demonstrate the optical injection locking of two hybrid InP/Si3N4 lasers when the leader laser and the follower laser are both hybrid integrated lasers of same system on chip.When the laser is locked, we report a locking range of 1.86 GHz, This work was supported in part by the European Space Agency (ESA) through two activities: The TRP Program “Tuneable Photonic RF Demultiplexer for Broadband Satellites – THORMUX”, by H2020 within the Program “SpaceBeam” under Grant 870421 and a cosponsored PostDoc research activity on “Integrated microwave photonic technology for wide-frequency tuning signal generation – IMPHOTECH” (Ref.: RSA RFP/3-17140/21NL/GLC/my), in part by the European Union through two projects: TERA6G Project under Grant 101096949 and SPRINTER Project under Grant 101070581, in part by a national project named “6G-Xtreme” (Ref.:TSI-063000-2021-136), and in part by APC: Universidad Carlos III de Madrid (Agreement CRUE-Madroño 2024)
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

InP/Si3N4 Hybrid Integrated Lasers for RF Local Oscillator Signal Generation in Satellite Payloads

  • César Cuello, Jessica
  • Zarzuelo García, Alberto
  • Guzmán Martínez, Robinson Cruzoe
  • Mitsolidou, Charoula
  • Visscher, Ilka
  • Timens, Roelof B.
  • Van Dijk, Paulus W.L.
  • Roeloffzen, Chris
  • González Guerrero, Luis
  • Delgado Mendinueta, José Manuel
  • Carpintero del Barrio, Guillermo
This paper presents an integrated tunable hybrid multi-laser module designed to simultaneously generate multiple radiofrequency (RF) local oscillator (LO) signals through optical heterodyning. The device consists of five hybrid InP/Si3N4 integrated lasers, each incorporating an intracavity wavelength-selective optical filter formed by two micro-ring resonators. Through beating the wavelengths generated from three of these lasers, we demonstrate the simultaneous generation of two LO signals within bands crucial for satellite communications (SatCom): one in the Ka-band and the other in the V-band. The device provides an extensive wavelength tuning range across the entire C-band and exhibits exceptionally narrow optical linewidths, below 40 kHz in free-running mode. This results in ultra-wideband tunable RF signals with narrow electrical linewidths below 100 kHz. The system is compact and highly scalable, with the potential to generate up to 10 simultaneous LO signals, being a promising solution for advanced RF signal generation in high throughput satellite payloads., This work has been supported by the European Space Agency through the TRP program “Tuneable Photonic RF Demultiplexer for Broadband Satellites—THORMUX” (GA 870421), by the European Union through the projects TERA6G (GA 101096949), SPRINTER (GA 101070581), and POLYNICES (G.A. 101070549), and by a Spanish national project, “6G-Xtreme” (Ref. TSI-063000-2021-136).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Dual-Wavelength-Modulation mm-Wave and THz Systems: Analysis and Experimental Demonstration At 60 GHz With a Gain-Switched Laser

  • González Guerrero, Luis
  • Delmade, Amol
  • Dass, Devika
  • Browning, Colm
  • Barry, Liam P.
  • Smyth, Frank
  • Lamela Rivera, Horacio
  • Carpintero del Barrio, Guillermo
Dual-wavelength-modulation (dual-λ-mod) photonic mm-wave/THz transmitters are an attractive alternative to conventional heterodyne systems for their simplicity. In this article, dual-λ-mod systems are analysed, paying special attention to the impact of fiber dispersion and signal-signal beat interference. In contrast to what has been reported in the literature, it is concluded here that dual-λ-mod systems based on optical double sideband (DSB) modulation are subjected to power fading, rendering them useless for high-speed mm-wave/THz communications. To solve this, the use of optical single sideband (SSB) modulation – which is immune to power fading – is proposed here. Using a gain-switched (GS) laser, a 60-GHz SSB dual-λ-mod system transmitting 2.5-GBd 16- QAM signals is demonstrated experimentally. A penalty of around 2.8 dB is measured with respect to the conventional dual-path heterodyne transmitter over optical B2B and 10-km transmission. The reduction in complexity enabled by the demonstrated system aids in the deployment of cost-effective mm-wave/THz networks, This work was supported in part by UC3M and the European Commission under Grants GA 801538 and 101096949, in part by the Spanish Ministry of economic affairs and Digital Transformation under Grant TSI-063000-2021-136, and in part by Science Foundation Ireland under Grants 18/SIRG/5579, 13/RC/2077/p2, and 12/RC/2276/P2.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Ultra-Wideband MUTC Photodiode Source for Waveguide-Based THz Device Testing

  • Iwamatsu, Shuya
  • Gohil, Himanshu
  • Grzeslo, Marcel
  • Wang, Hui
  • Brewster, Nick
  • Merritt, Mark
  • Fernández Estévez, José Luis
  • Strah, Jessica
  • Neerfeld, Tom
  • Tebart, Jonas
  • Makhlouf, Sumer
  • Headland, Daniel
  • Ali, Muhsin
  • Carpintero del Barrio, Guillermo
  • Huggard, Peter G.
  • Stohr, Andreas
The development of terahertz (THz) technology exploiting untapped bandwidth is essential for sensing and communications in 6G and beyond. Instrumentation systems for evaluating the performances of THz devices are of increasing interest. Currently, THz device testing with electronics-based vector network analyzers (VNAs) requires a series of frequency extender pairs to cover all individual bands in the THz range. This increases system complexity and cost. Here, we report on an ultrawideband (UWB) photonic THz source, which will enable simpler and cost-effective THz device testing. The source employs a modified unitraveling-carrier photodiode (MUTC-PD) operating from 100 to 600 GHz. The InP-based MUTC-PD is hybrid-integrated with a UWB high-resistivity Si waveguide interface to efficiently couple the optically generated THz waves to the device under test. By utilizing a UWB THz power detector, a waveguide-based scalar transmission measurement system is demonstrated, a crucial step toward a future waveguide-based photonic VNA., This work was supported in part by the European Marie-Curie TERAOPTICS project funded by EU Horizon 2020 under Grant 956857, in part by BMBF under Project 6G-ADLANTIK under Grant 16KISK146, in part by BMBF under Project 6GEM under Grant 16KISK039, in part by BMBF under Project Open6GHub under Grant 16KISK017, in part by DFG under CRC/TRR 196 MARIE C06 and C07 under Grant 287022738, in part by Australian Research Council Discover Early Career Researcher Award funded by Australian Gov ernment under Project DE240100625, and in part by European Union’s Horizon Europe Framework Programme TERA6G under Grant 101096949 and Grant PID2023-149035OB-I00 funded by MICIU/AEI/ 10.13039/501100011033 and in part by ERDF/UE.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Multi-Octave All-Dielectric Directional Coupler Using Integrated Half-Mirror for Ultrawideband Terahertz Systems

  • Headland, Daniel
  • Gallego Cabo, Daniel
  • Sakaki, Masoud
  • Benson, Niels
  • Carpintero del Barrio, Guillermo
Network analysis is foundational to calibrated instrumentation for practical handheld devices, and the directional coupler is the fundamental passive component that makes it possible. In this work, a terahertz-range handheld integrated-photonic directional coupler is reported with broad operation bandwidth spanning more than two octaves. The design adapts the underlying ray-tracing principles of classical parabolic reflectors and optical beam splitters to a monolithic substrateless micro-machined silicon structure. This advance holds the potential to unlock a new generation of terahertz systems, including vector network analyzers, that combine the broad bandwidth of bulky quasi-optical terahertz systems with the handheld form-factor and convenient, repeatable port access of guided-wave approaches., D. H. acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant agreement No. 801538, and from an Australian Research Council Discover Early Career Researcher Award (Project No. DE240100625) funded by the Australian Government. This work was supported by the TERAmeasure project, funded by the Research Executive Agency (REA) under Grant Agreement No. 862788, and by the Smart Networks and Services Joint Undertaking (SNS JU) under the European Union's Horizon Europe research and innovation programme under Grant Agreement No. 101096949 (TERA6G project). This work was supported by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) – Project-ID 287022738 – TRR 196 MARIE within project C09.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Matched dielectric slot waveguide as an all-dielectric terahertz magnetic dipole

  • Headland, Daniel
  • Kumar, Ashish
  • Lees, Harrison
  • Withayachumnankul, Withawat
  • Carpintero del Barrio, Guillermo
We observe that the modal field distribution of a dielectric slot waveguide closely resembles a magnetic dipole antenna. Such an aperture distribution traditionally demands metals, making it ill-suited to high frequencies due to excessive ohmic loss. By terminating a dielectric slot waveguide with a matched free-space interface, a compact all-dielectric radiating magnetic dipole is realized. In this way, we introduce general-purpose dipole antennas, which have long been a mainstay of RF and microwave ranges, into the realm of light wave photonic integrated circuits. The existence of the desired magnetic dipole aperture distribution is experimentally confirmed in the terahertz range, at -275 GHz, and good matching is evident in the -25 dB reflection level. This is the electrically smallest radiator to ever be incorporated into an all-dielectric waveguiding platform., Australian Research Council (DP220100489); European Research Executive Agency (862788); Horizon 2020 Framework Programme (101096949, 801538, 956857).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Integrated Quasi-Optical Terahertz Liquid Sensor Leveraging Mode-Parity-Dependent Interaction with a Capillary-Confined Analyte

  • Klein, Andreas K.
  • Webber, Julian
  • Carpintero del Barrio, Guillermo
  • Fujita, Masayuki
  • Headland, Daniel
The integration of terahertz (THz) sensing technology into compact, on-chip platforms is essential to the advancement of high-precision chemical and biomedical analysis, promising to bring analytics closer to the point of care and to enable in situ analysis of industrial processes. This study presents an integrated quasi-optical THz liquid sensor that features a longitudinal cavity in a silicon slab waveguide, in which a capillary-confined analyte interacts with guided slab modes on resonance. The sensor design leverages mode-parity-dependent field distributions: even-parity resonances exhibit strong analyte-field interaction, whilst odd-parity modes remain largely unaffected by the presence of the analyte, enabling intrinsic self-calibration. The device is fabricated using deep reactive ion etching of high-resistivity silicon and monolithically integrates all required components. Experimental measurements with water and isopropanol demonstrate alternating resonance peaks with distinct sensitivity to refractive index and absorption, validated by linear shifts in frequency and transmission loss. The self-calibrating feature allows for real-time compensation of system fluctuations towards automated continuous monitoring applications. These findings establish the sensor's capability for simultaneous, precise material characterization and calibration, highlighting its potential for in-line process monitoring and other high-bandwidth sensing applications., This work was supported by Horizon Europe research and innovation program TERA6G project (Grant Agreement No 101096949), MiBiLab (ref. PID2023-149035OB-I00, funded by MICIU/AEI/10.13039/501100011033 and by ERDF/UE), and TERAcom-6G project (ref. TSI-064100-2023-39) from Ministerio de Asuntos Económicos y Transformación Digital and European Union-NextGenerationEU UNICO I+D 6G 2023 in the framework of “Plan de Recuperación, Transformación y Resiliencia” and the “Mecanismo de Recuperación y Resiliencia” for research infrastructure. This work was supported in part by CREST, JST (JPMJCR21C4), and KAKENHI (24H00031). Headland is the recipient of an Australian Research Council Discovery Early Career Award (project number DE240100625) funded by the Australian Government.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Otros (Other)

3D-Printed Multimode-Interference-Based Bessel Beamformer for Terahertz Dielectric Waveguides

  • Kumar, Ashish
  • Ayyagarii, Surya Revanth
  • Ali, Muhsin
  • Kasalynas, Irmantas
  • Headland, Daniel
  • Carpintero del Barrio, Guillermo
We demonstrate a Bessel beamformer based on multimode interference (MMI) for the terahertz (THz) wave range. Unlike traditional Bessel beam generation methods, which often rely on bulky free-space optical setups, our approach leverages a 3D-printed cyclic-olefin-copolymer (COC) MMI structure fed from a dielectric waveguide (DW) with a λ/4 slot-waveguide termination (SWT) that provides an index-matched interface for low reflection. Based on this interface and the low losses of the constituent materials, the beamformer achieves a measured transmission efficiency of 93.9% at 275 GHz, with a propagating distance of 20 mm ( ∼ 20 λ ). Even at an extended distance of 35 mm ( ∼ 35 λ ), the beam maintains a 50% efficiency. This approach addresses key limitations of existing free-space methods, offering a workable guided-wave approach to launch a THz Bessel beam., This work was supported in part by the Terahertz Photonics for Communications, Space, Security, Radio-Astronomy, and Material Science (TERAOPTICS) Project under Grant 956857; in part by the Services Joint Undertaking through the European Union’s (EU) Horizon Europe Research and Innovation Program TERA6G and the Horizon Europe Framework Program Project POLYN-ICES under Agreement 101096949 and Agreement 101070549; in part by the National Grant MiBiLab through MICIU/AEI/10.13039/501100011033 and European Regional Development Fund (ERDF)/European Union (EU) under Grant PID2023-149035OB-I00; and in part by the Ministerio de Asuntos Económicos y Transformación Digital and European Union-NextGenerationEU through the project “TERAcom-6G” within ´UNICO I+D 5G-6G 2023 Program for Research Infrastructure and Scientific Equipment under Grant TSI-064100-2023-39. The work of Daniel Headland was supported in part by Australian Research Council’s Discover Early Career Researcher Award through Australian Government under Project DE240100625 and in part by the Article Processing Charge (APC): Universidad Carlos III de Madrid under Agreement CRUE-Madroño 2025.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Two-Conductor Ports Enabling Broadband Operation of Substrateless Microscale Silicon Waveguides

  • Headland, Daniel
  • Gallego Cabo, Daniel
  • Carpintero del Barrio, Guillermo
We extend the operation bandwidth of substrateless all-silicon waveguides beyond the single-mode region. This requires a suitably broadband port-access scheme, as well as careful management of undesired higher order modes. It is found that a length of two-conductor waveguide serves both purposes. In this way, we experimentally demonstrate broadband power transfer between dielectric waveguides and numerically investigate suppression of higher order modes. This 3-D solid-metal two-conductor waveguide shows promise as a package-external terahertz port, to address the 40% relative-bandwidth bottleneck that is currently imposed by hollow metallic waveguides. This represents a step toward efficient handheld terahertz systems that fully exploit the broad available spectrum., The work of Daniel Headland was supported by the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme Marie Sklodowska-Curie under Grant 801538. This work was supported by the Research Executive Agency (REA) through TERAmeasure project under Grant 862788, in part by the Smart Networks and Services Joint Undertaking (SNS JU) through the European Union’s Horizon Europe research and innovation programme under Grant 101096949 (TERA6G project), and in part by the APC: Universidad Carlos III de Madrid (Agreement CRUE-Madroño 2024)