Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

Contactless Cost-effective Polarizer for mm-Wave Dielectric Rod Waveguide

  • Kumar, Ashish
  • Gallego Cabo, Daniel
  • Headland, Daniel
  • Ali, Muhsin
  • Xenidis, Nikolaos
  • Lioubtchenko, Dmitri
  • Carpintero del Barrio, Guillermo
Proceedings of: 47th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz 2022), 28 August - 02 September 2022, Delft, Netherlands., We present a method to control the polarization of guided waves in a mm-wave dielectric rod waveguide. A pair of optical posts is situated on either side of the waveguide, and this markedly raises the cutoff of the undesired mode. The isolation is 20 dB over a frequency span from (55-87) GHz. This can be viewed as a proof-of-concept for reconfigurable, general-purpose polarization control and dispersion engineering in mm-wave and terahertz-range dielectric waveguides., The authors wish to acknowledge support from the following Grants: TERAOPTICS project (Grant No: 956857) and TERAWAY project (Grant No: 871668) funded from the European Union's research and innovation program. We also acknowledge support by the Research Executive Agency (REA) Grant Agreement No: 862788 (TERAmeasure project) under Horizon 2020 Excellent Science.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Multi-Octave All-Dielectric Directional Coupler Using Integrated Half-Mirror for Ultrawideband Terahertz Systems

  • Headland, Daniel
  • Gallego Cabo, Daniel
  • Sakaki, Masoud
  • Benson, Niels
  • Carpintero del Barrio, Guillermo
Network analysis is foundational to calibrated instrumentation for practical handheld devices, and the directional coupler is the fundamental passive component that makes it possible. In this work, a terahertz-range handheld integrated-photonic directional coupler is reported with broad operation bandwidth spanning more than two octaves. The design adapts the underlying ray-tracing principles of classical parabolic reflectors and optical beam splitters to a monolithic substrateless micro-machined silicon structure. This advance holds the potential to unlock a new generation of terahertz systems, including vector network analyzers, that combine the broad bandwidth of bulky quasi-optical terahertz systems with the handheld form-factor and convenient, repeatable port access of guided-wave approaches., D. H. acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant agreement No. 801538, and from an Australian Research Council Discover Early Career Researcher Award (Project No. DE240100625) funded by the Australian Government. This work was supported by the TERAmeasure project, funded by the Research Executive Agency (REA) under Grant Agreement No. 862788, and by the Smart Networks and Services Joint Undertaking (SNS JU) under the European Union's Horizon Europe research and innovation programme under Grant Agreement No. 101096949 (TERA6G project). This work was supported by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) – Project-ID 287022738 – TRR 196 MARIE within project C09.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Two-Conductor Ports Enabling Broadband Operation of Substrateless Microscale Silicon Waveguides

  • Headland, Daniel
  • Gallego Cabo, Daniel
  • Carpintero del Barrio, Guillermo
We extend the operation bandwidth of substrateless all-silicon waveguides beyond the single-mode region. This requires a suitably broadband port-access scheme, as well as careful management of undesired higher order modes. It is found that a length of two-conductor waveguide serves both purposes. In this way, we experimentally demonstrate broadband power transfer between dielectric waveguides and numerically investigate suppression of higher order modes. This 3-D solid-metal two-conductor waveguide shows promise as a package-external terahertz port, to address the 40% relative-bandwidth bottleneck that is currently imposed by hollow metallic waveguides. This represents a step toward efficient handheld terahertz systems that fully exploit the broad available spectrum., The work of Daniel Headland was supported by the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme Marie Sklodowska-Curie under Grant 801538. This work was supported by the Research Executive Agency (REA) through TERAmeasure project under Grant 862788, in part by the Smart Networks and Services Joint Undertaking (SNS JU) through the European Union’s Horizon Europe research and innovation programme under Grant 101096949 (TERA6G project), and in part by the APC: Universidad Carlos III de Madrid (Agreement CRUE-Madroño 2024)
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Terahertz integration platforms using substrateless all-silicon microstructures

  • Headland, Daniel
  • Fujita, Masayuki
  • Carpintero del Barrio, Guillermo
  • Nagatsuma, Tadao
  • Withayachumnankul, Withawat
The absence of a suitable standard device platform for terahertz waves is currently a major roadblock that is inhibiting the widespread adoption and exploitation of terahertz technology. As a consequence, terahertz-range devices and systems are generally an ad hoc combination of several different heterogeneous technologies and fields of study, which serves perfectly well for a once-off experimental demonstration or proof-of-concept, but is not readily adapted to real-world use case scenarios. In contrast, establishing a common platform would allow us to consolidate our design efforts, define a well-defined scope of specialization for 'terahertz engineering,' and to finally move beyond the disconnected efforts that have characterized the past decades. This tutorial will present arguments that nominate substrateless all-silicon microstructures as the most promising candidate due to the low loss of high-resistivity float-zone intrinsic silicon, the compactness of high-contrast dielectric waveguides, the designability of lattice structures, such as effective medium and photonic crystal, physical rigidity, ease and low cost of manufacture using deep-reactive ion etching, and the versatility of the many diverse functional devices and systems that may be integrated. We will present an overview of the historical development of the various constituents of this technology, compare and contrast different approaches in detail, and briefly describe relevant aspects of electromagnetic theory, which we hope will be of assistance., Daniel Headland acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 Research and Innovation Programme under Marie Sklodowska-Curie Grant Agreement No. 801538. This work was supported by Australian Research Council Discovery Project Nos. DP180103561 and DP220100489. G. Carpintero acknowledges the Research Executive Agency (REA) Grant Agreement No. 862788 (TERAmeasure project) under Horizon 2020 Excellent Science, Fostering Novel Ideas FET-open program. This work was supported in part by Japan Science and Technology Agency through the Core Research for Evolutional Science and Technology (CREST; Program No. JPMJCR21C4), in part, by the National Institute of Information and Communications Technology (NICT), Japan (Grant No. 03001), and by KAKENHI, Japan (Grant No. 20H00249).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Contactless RF Probe Interconnect Technology Enabling Broadband Testing to the Terahertz Range

  • Rivera Lavado, Alejandro
  • Ali, Muhsin
  • Gallego Cabo, Daniel
  • García Muñoz, Luis Enrique
  • Lioubtchenko, Dimitri
  • Carpintero del Barrio, Guillermo
Radiofrequency (RF) probes based on 50 planar transmission lines play a key role in almost every stage of RF device development, establishing the physical contact between high-end instrumentation and the device. With the continuous downscaling of semiconductor technologies to reach into the millimeter-wave (30-300 GHz) and Terahertz (300 GHz to 3 THz) bands and devices exhibiting broader frequency response, current RF probe technology is the Achilles heel for precise and repeatable measurements. Here, we propose a novel RF probe technology based on the near-field coupling of single-mode dielectric waveguide structures, which according to our full-wave simulations provide an extremely broad frequency range covering from 0 Hz up to 340 GHz, the largest continuous bandwidth reported to date. A concept demonstrator using this approach shows contactless RF probing on test structures, which shows the path toward continuous measurements across the microwave, millimeter-wave, and Terahertz range., Thisworkwas supported by the European Union’s Horizon 2020 Research and Innovation Program under Grant 862788 (TERAmeasure FET Open project).