Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 55
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Metamaterial-inspired antenna array for application in microwave breast imaging systems for tumor detection

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Shukla, Panchamkumar
  • Ojaroudi Parchin, Naser
  • Azpilicueta, Leyre
  • See, Chan Hwang
  • Abd-Alhameed, Raed A.
  • Falcone, Francisco
  • Huynen, Isabelle
  • Denidni, Tayeb A.
  • Limiti, Ernesto
This paper presents a study of a planar antenna-array inspired by the metamaterial concept where the resonant elements have sub-wavelength dimensions for application in microwave medical imaging systems for detecting tumors in biological tissues. The proposed antenna consists of square-shaped concentric-rings which are connected to a central patch through a common feedline. The array structure comprises several antennas that are arranged to surround the sample breast model. One antenna at a time in the array is used in transmission-mode while others are in receive-mode. The antenna array operates over 2-12 GHz amply covering the frequency range of existing microwave imaging systems. Measured results show that compared to a standard patch antenna array the proposed array with identical dimensions exhibits an average radiation gain and efficiency improvement of 4.8 dBi and 18%, respectively. The average reflection-coefficient of the array over its operating range is better than S 11 ≤ -20 dB making it highly receptive to weak signals and minimizing the distortion encountered with the transmission of short duration pulse-trains. Moreover, the proposed antenna-array exhibits high-isolation on average of 30 dB between radiators. This means that antennas in the array (i) can be closely spaced to accommodate more radiators to achieve higher-resolution imaging scans, and (ii) the imagining scans can be done over a wider frequency range to ascertain better contrast in electrical parameters between malignant tumor-tissue and the surrounding normal breast-tissue to facilitate the detection of breast-tumor. It is found that short wavelength gives better resolution. In this experimental study a standard biomedical breast model that mimics a real-human breast in terms of dielectric and optical properties was used to demonstrate the viability of the proposed antenna over a standard patch antenna in the detection and the localization of tumor. These results are encouraging for clinical trials and further refinement of the antenna-array., This work was partially supported by RTI2018-095499-B-C31, Funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE), and Innovation Programme under Grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the U.K. Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/E022936/1.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Improved adaptive impedance matching for RF front-end systems of wireless transceivers

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Shukla, Pancham
  • See, Chan H.
  • Abd-Alhameed, Raed A.
  • Falcone, Francisco
  • Limiti, Ernesto
In this paper an automatic adaptive antenna impedance tuning algorithm is presented that is based on quantum inspired genetic optimization technique. The proposed automatic quantum genetic algorithm (AQGA) is used to find the optimum solution for a low-pass passive T-impedance matching LC-network inserted between an RF transceiver and its antenna. Results of the AQGA tuning method are presented for applications across 1.4 to 5 GHz (satellite services, LTE networks, radar systems, and WiFi bands). Compared to existing genetic algorithm-based tuning techniques the proposed algorithm converges much faster to provide a solution. At 1.4, 2.3, 3.4, 4.0, and 5.0 GHz bands the proposed AQGA is on average 75%, 49.2%, 64.9%, 54.7%, and 52.5% faster than conventional genetic algorithms, respectively. The results reveal the proposed AQGA is feasible for real-time application in RF-front-end systems., This work is partially supported by RTI2018-095499-B-C31, Funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE), and innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the fnancial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Bandwidth and gain enhancement of composite right left handed metamaterial transmission line planar antenna employing a non foster impedance matching circuit board

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Althuwayb, Ayman A.
  • Azpilicueta, Leyre
  • Ojaroudi Parchin, Naser
  • See, Chan H.
  • Abd-Alhameed, Raed A.
  • Falcone, Francisco
  • Huynen, Isabelle
  • Denidni, Tayeb A.
  • Limiti, Ernesto
The paper demonstrates an effective technique to significantly enhance the bandwidth and radiation gain of an otherwise narrowband composite right/left-handed transmission-line (CRLH-TL) antenna using a non-Foster impedance matching circuit (NF-IMC) without affecting the antenna’s stability. This is achieved by using the negative reactance of the NF-IMC to counteract the input capacitance of the antenna. Series capacitance of the CRLH-TL unit-cell is created by etching a dielectric spiral slot inside a rectangular microstrip patch that is grounded through a spiraled microstrip inductance. The overall size of the antenna, including the NF-IMC at its lowest operating frequency is 0.335λ0 × 0.137λ0 × 0.003λ0, where λ0 is the free-space wavelength at 1.4 GHz. The performance of the antenna was verified through actual measurements. The stable bandwidth of the antenna for |S11|≤ − 18 dB is greater than 1 GHz (1.4–2.45 GHz), which is significantly wider than the CRLH-TL antenna without the proposed impedance matching circuit. In addition, with the proposed technique the measured radiation gain and efficiency of the antenna are increased on average by 3.2 dBi and 31.5% over the operating frequency band., This work is partially supported by RTI2018-095499-B-C31, Funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE), and innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Impedance bandwidth improvement of a planar antenna based on metamaterial-inspired T-matching network

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Shukla, Pancham
  • Wang, Yan
  • Azpilicueta, Leyre
  • Naser-Moghadasi, Mohammad
  • See, Chan Hwang
  • Elfergani, Issa
  • Zebiri, Chemseddine
  • Abd-Alhameed, Raed A.
  • Huynen, Isabelle
  • Rodriguez, Jonathan
  • Denidni, Tayeb A.
  • Falcone, Francisco
  • Limiti, Ernesto
In this paper a metamaterial-inspired T-matching network is directly imbedded inside the feedline of a microstrip antenna to realize optimum power transfer between the front-end of an RF wireless transceiver and the antenna. The proposed T-matching network, which is composed of an arrangement of series capacitor, shunt inductor, series capacitor, exhibits left-handed metamaterial characteristics. The matching network is first theoretically modelled to gain insight of its limitations. It was then implemented directly in the 50- Ω feedline to a standard circular patch antenna, which is an unconventional methodology. The antenna's performance was verified through measurements. With the proposed technique there is 2.7 dBi improvement in the antenna's radiation gain and 12% increase in the efficiency at the center frequency, and this is achieved over a significantly wider frequency range by a factor of approximately twenty. Moreover, there is good correlation between the theoretical model, method of moments simulation, and the measurement results., This work was supported in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE), under Grant RTI2018-095499-B-C31, in part by the British Council (UK-China-BRI Countries Education Partnership Initiative 2019), in part by the Innovation Programme under Grant H2020-MSCA-ITN-2016 SECRET-722424, and in part by the U.K. Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/E022936/1.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Study on on-chip antenna design based on metamaterial-inspired and substrate-integrated waveguide properties for millimetre-wave and THz integrated-circuit applications

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Althuwayb, Ayman Abdulhadi
  • Aïssa, Sonia
  • See, Chan H.
  • Abd-Alhameed, Raed A.
  • Falcone, Francisco
  • Limiti, Ernesto
This paper presents the results of a study on improving the performance parameters such as the impedance bandwidth, radiation gain and efficiency, as well as suppressing substrate loss of an innovative antenna for on-chip implementation for millimetre-wave and terahertz integrated-circuits. This was achieved by using the metamaterial and the substrate-integrated waveguide (SIW) technologies. The on-chip antenna structure comprises five alternating layers of metallization and silicon. An array of circular radiation patches with metamaterial-inspired crossed-shaped slots are etched on the top metallization layer below which is a silicon layer whose bottom surface is metalized to create a ground plane. Implemented in the silicon layer below is a cavity above which is no ground plane. Underneath this silicon layer is where an open-ended microstrip feedline is located which is used to excite the antenna. The feed mechanism is based on the coupling of the electromagnetic energy from the bottom silicon layer to the top circular patches through the cavity. To suppress surface waves and reduce substrate loss, the SIW concept is applied at the top silicon layer by implementing the metallic via holes at the periphery of the structure that connect the top layer to the ground plane. The proposed on-chip antenna has an average measured radiation gain and efficiency of 6.9 dBi and 53%, respectively, over its operational frequency range from 0.285-0.325 THz. The proposed on-chip antenna has dimensions of 1.35 × 1 × 0.06 mm3. The antenna is shown to be viable for applications in millimetre-waves and terahertz integrated-circuits., Open access funding provided by Università degli Studi di Roma Tor Vergata within the CRUI-CARE Agreement. This work is partially supported by RTI2018-095499-B-C31, Funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE), innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Optimum power transfer in RF front end systems using adaptive impedance matching technique

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Azpilicueta, Leyre
  • See, Chan H.
  • Abd-Alhameed, Raed A.
  • Althuwayb, Ayman A.
  • Falcone, Francisco
  • Huynen, Isabelle
  • Denidni, Tayeb A.
  • Limiti, Ernesto
Matching the antenna's impedance to the RF-front-end of a wireless communications system is challenging as the impedance varies with its surround environment. Autonomously matching the antenna to the RF-front-end is therefore essential to optimize power transfer and thereby maintain the antenna's radiation efficiency. This paper presents a theoretical technique for automatically tuning an LC impedance matching network that compensates antenna mismatch presented to the RF-front-end. The proposed technique converges to a matching point without the need of complex mathematical modelling of the system comprising of non-linear control elements. Digital circuitry is used to implement the required matching circuit. Reliable convergence is achieved within the tuning range of the LC-network using control-loops that can independently control the LC impedance. An algorithm based on the proposed technique was used to verify its effectiveness with various antenna loads. Mismatch error of the technique is less than 0.2%. The technique enables speedy convergence (< 5 µs) and is highly accurate for autonomous adaptive antenna matching networks., This work is partially supported by RTI2018-095499-B-C31, Funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE), and innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

High-isolation antenna array using SIW and realized with a graphene layer for sub-terahertz wireless applications

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Salekzamankhani, Shahram
  • Aïssa, Sonia
  • See, Chan H.
  • Soin, Navneet
  • Fishlock, Sam J.
  • Althuwayb, Ayman A.
  • Abd-Alhameed, Raed A.
  • Huynen, Isabelle
  • Mclaughlin, James A.
  • Falcone, Francisco
  • Limiti, Ernesto
This paper presents the results of a study on developing an effective technique to increase the performance characteristics of antenna arrays for sub-THz integrated circuit applications. This is essential to compensate the limited power available from sub-THz sources. Although conventional array structures can provide a solution to enhance the radiation-gain performance however in the case of small-sized array structures the radiation properties can be adversely affected by mutual coupling that exists between the radiating elements. It is demonstrated here the effectiveness of using SIW technology to suppress surface wave propagations and near field mutual coupling effects. Prototype of 2 × 3 antenna arrays were designed and constructed on a polyimide dielectric substrate with thickness of 125 mum for operation across 0.19-0.20 THz. The dimensions of the array were 20 × 13.5 × 0.125 mm3. Metallization of the antenna was coated with 500 nm layer of Graphene. With the proposed technique the isolation between the radiating elements was improved on average by 22.5 dB compared to a reference array antenna with no SIW isolation. The performance of the array was enhanced by transforming the patch to exhibit metamaterial characteristics. This was achieved by embedding the patch antennas in the array with sub-wavelength slots. Compared to the reference array the metamaterial inspired structure exhibits improvement in isolation, radiation gain and efficiency on average by 28 dB, 6.3 dBi, and 34%, respectively. These results show the viability of proposed approach in developing antenna arrays for application in sub-THz integrated circuits., This work was supported in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE) under Grant RTI2018-095499-B-C31, in part by the Innovation Programme under Grant H2020-MSCA-ITN-2016 SECRET-722424, and in part by the U.K. Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/E022936/1.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Mutual-coupling isolation using embedded metamaterial em bandgap decoupling slab for densely packed array antennas

  • Alibakhshikenari, Mohammad
  • Khalily, Mohsen
  • Virdee, Bal Singh
  • Hwang See, Chan
  • Abd-Alhameed, Raed A.
  • Limiti, Ernesto
This paper presents a unique technique to enhance isolation between transmit/receive radiating elements in densely packed array antenna by embedding a metamaterial (MTM) electromagnetic bandgap (EMBG) structure in the space between the radiating elements to suppress surface currents that would otherwise contribute towards mutual coupling between the array elements. The proposed MTM-EMBG structure is a cross-shaped microstrip transmission line on which are imprinted two outward facing E-shaped slits. Unlike other MTM structures, there is no short-circuit grounding using via-holes. With this approach, the maximum measured mutual coupling achieved is -60 dB @ 9.18 GHz between the transmit patches (#1 & #2) and receive patches (#3 & #4) in a four-element array antenna. Across the antenna's measured operating frequency range of 9.12 9.96 GHz, the minimum measured isolation between each element of the array is 34.2 dB @ 9.48 GHz, and there is no degradation in radiation patterns. The average measured isolation over this frequency range is 47 dB. The results presented con rm the proposed technique is suitable in applications such as synthetic aperture radar and multiple-input multiple-output systems., This work was supported in part by the Innovation Programme under Grant H2020-MSCA-ITN-2016 SECRET-722424 and in part by the U.K. Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/E022936/1.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Wireless Electromagnetic Radiation Assessment Based on the Specific Absorption Rate (SAR): A Review Case Study

  • Abdul-Al, Mohamed
  • Amar, Ahmed S. I.
  • Elfergani, Issa
  • Littlehales, Richard
  • Ojaroudi Parchin, Naser
  • Al-Yasir, Yasir
  • See, Chan Hwang
  • Zhou, Dawei
  • Abidin, Zuhairiah Zainal
  • Alibakhshikenari, Mohammad
  • Zebiri, Chemseddine
  • Elmegri, Fauzi
  • Abusitta, Musa
  • Ullah, Atta
  • Abdussalam, Fathi M. A.
  • Rodriguez, Jonathan
  • McEwan, Neil J.
  • Noras, James M.
  • Hodgetts, Russell
  • Abd-Alhameed, Raed A.
Employing electromagnetic fields (EMFs) in new wireless communication and sensing technologies has substantially increased the level of human exposure to EMF waves. This paper presents a useful insight into the interaction of electromagnetic fields with biological media that is defined by the heat generation due to induced currents and dielectric loss. The specific absorption rate (SAR) defines the heating amount in a biological medium that is irradiated by an electromagnetic field value. The paper reviews the radio frequency hazards due to the SAR based on various safety standards and organisations, including a detailed investigation of previously published work in terms of modelling and measurements. It also summarises the most common techniques utilised between 1978 and 2021, in terms of the operational frequency spectrum, bandwidth, and SAR values., The European Union’s Horizon 2020 innovation programme under grant agreement H2020- MSCA-ITN-2016 SECRET-722424 and the U.K. Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1 supported this research. This study is also sponsored by the FCT/MEC through national funds and, where applicable, co-financed by the ERDF under the PT2020 Partnership Agreement under the UID/EEA/50008/2020 project. This study is part of the POSITIONII project, which is funded by the European Commission’s Joint Undertaking under the grant number Ecsel-7831132-Postitio-II-2017-IA. Moreover, this paper is also partially funded by British Council “2019 UK-China-BRI Countries Partnership Initiative” programme, with project titled “Adapting to Industry 4.0 oriented International Education and Research Collaboration”. In addition, this project has received funding from Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant 801538.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

High-isolation leaky-wave array antenna based on CRLH-metamaterial implemented on siw with ±30o frequency beam-scanning capability at millimetre-waves

  • Alibakhshikenari, Mohammad
  • Virdee, Bal Singh
  • See, Chan H.
  • Abd-Alhameed, Raed A.
  • Falcone, Francisco
  • Limiti, Ernesto
This article belongs to the Special Issue Massive MIMO Systems., The paper presents a feasibility study on the design of a new metamaterial leaky-wave antenna (MTM-LWA) used in the construction of a 1 × 2 array which is implemented using substrate-integrated waveguide (SIW) technology for millimetre-wave beamforming applications. The proposed 1 × 2 array antenna consists of two LWAs with metamaterial unit-cells etched on the top surface of the SIW. The metamaterial unit-cell, which is an E-shaped transverse slot, causes leakage loss and interrupts current flow over SIW to enhance the array’s performance. The dimensions of the LWA are 40 × 10 × 0.75 mm3. Mutual-coupling between the array elements is suppressed by incorporating a metamaterial shield (MTM-shield) between the two antennas in the array. The LWA operates over a frequency range of 55–65 GHz, which is corresponding to 16.66% fractional bandwidth. The array is shown to exhibit beam-scanning of ±30° over its operating frequency range. Radiation gain in the backward (−30°), broadside (0°), and forward (+30°) directions are 8.5 dBi, 10.1 dBi, and 9.5 dBi, respectively. The decoupling slab is shown to have minimal effect on the array’s performance in terms of impedance bandwidth and radiation specifications. The MTM-shield is shown to suppress the mutual coupling by ~25 dB and to improve the radiation gain and efficiency by ~1 dBi and ~13% on average, respectively., This work is partially supported by grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the UK EPSRC under grant EP/E022936/1.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

High-gain metasurface in polyimide on-chip antenna based on CRLH-TL for sub-terahertz integrated circuits

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • See, Chan H.
  • Abd-Alhameed, Raed A.
  • Falcone, Francisco
  • Limiti, Ernesto
Author Correction: High-Gain metasurface in polyimide On-Chip antenna based on CRLH-TL for Sub-Terahertz integrated circuits. Scientific Reports, 10, 13650. https://doi.org/10.1038/s41598-020-69882-3, This paper presents a novel on-chip antenna using standard CMOS-technology based on metasurface implemented on two-layers polyimide substrates with a thickness of 500 μm. The aluminium ground-plane with thickness of 3 μm is sandwiched between the two-layers. Concentric dielectric-rings are etched in the ground-plane under the radiation patches implemented on the top-layer. The radiation patches comprise concentric metal-rings that are arranged in a 3 × 3 matrix. The antennas are excited by coupling electromagnetic energy through the gaps of the concentric dielectric-rings in the ground-plane using a microstrip feedline created on the bottom polyimide-layer. The open-ended feedline is split in three-branches that are aligned under the radiation elements to couple the maximum energy. In this structure, the concentric metal-rings essentially act as series left-handed capacitances CL that extend the effective aperture area of the antenna without affecting its dimensions, and the concentric dielectric rings etched in the ground-plane act as shunt left-handed inductors LL, which suppress the surface-waves and reduce the substrates losses that leads to improved bandwidth and radiation properties. The overall structure behaves like a metasurface that is shown to exhibit a very large bandwidth of 0.350–0.385 THz with an average radiation gain and efficiency of 8.15dBi and 65.71%, respectively. It has dimensions of 6 × 6 × 1 mm3 that makes it suitable for on-chip implementation., This work is partially supported by RTI2018-095499-B-C31, Funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE), and innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the fnancial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Dual-Polarized Highly Folded Bowtie Antenna With Slotted Self-Grounded Structure for Sub-6 GHz 5G Applications

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • See, Chan Hwang
  • Shukla, Pancham
  • Moghaddam, Sadegh Mansouri
  • Zaman, Uz Ashraf
  • Shafqaat, Samia
  • Akinsolu, Mobayode O.
  • Liu, Bo
  • Yang, Jian
  • Abd-Alhameed, Raed A.
  • Falcone, Francisco
  • Limiti, Ernesto
In this communication, a novel dual-polarized highly folded self-grounded Bowtie antenna that is excited through I-shaped slots is proposed for applications in sub-6 GHz 5G multiple-input-multipleoutput (MIMO) antenna systems. The antenna consists of two pairs of folded radiation petals whose base is embedded in a double layer of FR-4 substrate with a common ground-plane which is sandwiched between the two substrate layers. The ground-plane is defected with two I-shaped slots located under the radiation elements. Each pair of radiation elements are excited through a microstrip line on the top layer with RF signal that is 180º out of phase with respect to each other. The RF signal is coupled to the pair of feedlines on the top layer through the I-shaped slots from the two microstrip feedlines on the underside of the second substrate. The proposed feed mechanism gets rid of the otherwise bulky balun. The Bowtie antenna is a compact solution with dimensions of 32 × 32 × 33.8 mm3.Measured results have verified that the antenna operates over a frequency range of 3.1&#8211;5 GHz and exhibits an average gain and antenna efficiency in the vertical and horizontal polarizations of 7.5 dBi and 82.6%, respectively., This project has received funding in part by the Universidad Carlos III de Madrid and the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie Grant 801538, in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de Spain (MCIU/AEI/FEDER, UE) under Grant RTI2018-095499-B-C31, in part by the Innovation Program under Grant H2020-MSCA-ITN-2016 SECRET-722424, and in part by the U.K. Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/E022936/1.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Mobile-phone antenna array with diamond-ring slot elements for 5G massive MIMO systems

  • Parchin, Naser Ojaroudi
  • Basherlou, Haleh Jahanbakhsh
  • Alibakhshikenari, Mohammad
  • Parchin, Yasser Ojaroudi
  • Al-Yasir, Yasir I. A.
  • Abd-Alhameed, Raed A.
  • Limiti, Ernesto
This article belongs to the Special Issue Massive MIMO Systems., A design of mobile-phone antenna array with diamond-ring slot elements is proposed for fifth generation (5G) massive multiple-input/multiple-output (MIMO) systems. The configuration of the design consists of four double-fed diamond-ring slot antenna elements placed at different corners of the mobile-phone printed circuit board (PCB). A low-cost FR-4 dielectric with an overall dimension of 75 × 150 mm2 is used as the design substrate. The antenna elements are fed by 50-Ohm L-shaped microstrip-lines. Due to the orthogonal placement of microstrip feed lines, the diamond-ring slot elements can exhibit the polarization and radiation pattern diversity characteristic. A good impedance bandwidth (S11 ≤ −10 dB) of 3.2–4 GHz has been achieved for each antenna radiator. However, for S11 ≤ −6 dB, this value is 3–4.2 GHz. The proposed design provides the required radiation coverage of 5G smartphones. The performance of the proposed MIMO antenna design is examined using both simulation and experiment. High isolation, high efficiency and sufficient gain-level characteristics have been obtained for the proposed MIMO smartphone antenna. In addition, the calculated total active reflection coefficient (TARC) and envelope correlation coefficient (ECC) of the antenna elements are very low over the whole band of interest which verify the capability of the proposed multi-antenna systems for massive MIMO and diversity applications. Furthermore, the properties of the design in Data-mode/Talk-mode are investigated and presented., The authors wish to express their thanks to the support provided by the innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Antenna mutual coupling suppression over wideband using embedded periphery slot for antenna arrays

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Shukla, Panchamkumar
  • See, Chan H.
  • Abd-Alhameed, Raed A.
  • Khalily, Mohsen
  • Falcone, Francisco
  • Limiti, Ernesto
This paper presents a new approach to suppress interference between neighbouring radiating elements resulting from surface wave currents. The proposed technique will enable the realization of low-profile implementation of highly dense antenna configuration necessary in SAR and MIMO communication systems. Unlike other conventional techniques of mutual coupling suppression where a decoupling slab is located between the radiating antennas the proposed technique is simpler and only requires embedding linear slots near the periphery of the patch. Attributes of this technique are (i) significant improvement in the maximum isolation between the adjacent antennas by 26.7 dB in X-band and >15 dB in Ku and K-bands; (ii) reduction in edge-to-edge gap between antennas to 10 mm (0.37 λ); and (iii) improvement in gain by >40% over certain angular directions, which varies between 4.5 dBi and 8.2 dBi. The proposed technique is simple to implement at low cost., This work is partially supported by innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Super-wide impedance bandwidth planar antenna for microwave and millimeter-wave applications

  • Alibakhshikenari, Mohammad
  • Virdee, Bal Singh
  • See, Chan H.
  • Abd-Alhameed, Raed A.
  • Falcone, Francisco
  • Limiti, Ernesto
This article belongs to the Special Issue Augmented RFID Technologies for the Internet of Things and Beyond., A feasibility study of a novel configuration for a super-wide impedance planar antenna is presented based on a 2 × 2 microstrip patch antenna (MPA) using CST Microwave Studio. The antenna comprises a symmetrical arrangement of four-square patches that are interconnected to each other with cross-shaped high impedance microstrip lines. The antenna array is excited through a single feedline connected to one of the patches. The proposed antenna array configuration overcomes the main drawback of conventional MPA with a narrow bandwidth that is typically <5%. The antenna exhibits a super-wide frequency bandwidth from 20 GHz to 120 GHz for S11 < −15 dB, which corresponds to a fractional bandwidth of 142.85%. The antenna’s performance of bandwidth, impedance match, and radiation gain were enhanced by etching slots on the patches. With the inclusion of the slot, the maximum radiation gain and efficiency of the MPA increased to 15.11 dBi and 85.79% at 80 GHz, which showed an improvement of 2.58 dBi and 12.54%, respectively. The dimension of each patch antenna was 4.3 × 5.3 mm2. The results showed that the proposed MPA is useful for various existing and emerging communication systems such as ultra-wideband (UWB) communications, RFID systems, massive multiple-output multiple-input (MIMO) for 5G, and radar systems., This work was partially supported by the Innovation Program under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

A comprehensive survey on "Various decoupling mechanisms with focus on metamaterial and metasurface principles applicable to SAR and MIMO antenna systems"

  • Alibakhshikenari, Mohammad
  • Babaeian, Fatemeh
  • Virdee, Bal S.
  • Aïssa, Sonia
  • Azpilicueta, Leyre
  • See, Chan Hwang
  • Althuwayb, Ayman Abdulhadi
  • Huynen, Isabelle
  • Abd-Alhameed, Raed A.
  • Falcone, Francisco
  • Limiti, Ernesto
Nowadays synthetic aperture radar (SAR) and multiple-input-multiple-output (MIMO) antenna systems with the capability to radiate waves in more than one pattern and polarization are playing a key role in modern telecommunication and radar systems. This is possible with the use of antenna arrays as they offer advantages of high gain and beamforming capability, which can be utilized for controlling radiation pattern for electromagnetic (EM) interference immunity in wireless systems. However, with the growing demand for compact array antennas, the physical footprint of the arrays needs to be smaller and the consequent of this is severe degradation in the performance of the array resulting from strong mutual-coupling and crosstalk effects between adjacent radiating elements. This review presents a detailed systematic and theoretical study of various mutual-coupling suppression (decoupling) techniques with a strong focus on metamaterial (MTM) and metasurface (MTS) approaches. While the performance of systems employing antenna arrays can be enhanced by calibrating out the interferences digitally, however it is more efficient to apply decoupling techniques at the antenna itself. Previously various simple and cost-effective approaches have been demonstrated to effectively suppress unwanted mutual-coupling in arrays. Such techniques include the use of defected ground structure (DGS), parasitic or slot element, dielectric resonator antenna (DRA), complementary split-ring resonators (CSRR), decoupling networks, P.I.N or varactor diodes, electromagnetic bandgap (EBG) structures, etc. In this review, it is shown that the mutual-coupling reduction methods inspired By MTM and MTS concepts can provide a higher level of isolation between neighbouring radiating elements using easily realizable and cost-effective decoupling configurations that have negligible consequence on the array's characteristics such as bandwidth, gain and radiation efficiency, and physical footprint., This work was supported in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE) under Grant RTI2018-095499-B-C31, in part by the Innovation Programme under Grant H2020-MSCA-ITN-2016 SECRET-722424, and in part by the U.K. Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/E022936/1.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Study on improvement of the performance parameters of a novel 0.41-0.47 THz on-chip antenna based on metasurface concept realized on 50 mum GaAs-layer

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • See, Chan H.
  • Shukla, Pancham
  • Salekzamankhani, Shahram
  • Abd-Alhameed, Raed A.
  • Falcone, Francisco
  • Limiti, Ernesto
A feasibility study is presented on the performance parameters of a novel on-chip antenna based on metasurface technology at terahertz band. The proposed metasurface on-chip antenna is constructed on an electrically thin high-permittivity gallium arsenide (GaAs) substrate layer. Metasurface is implemented by engraving slot-lines on an array of 11 × 11 circular patches fabricated on the top layer of the GaAs substrate and metallic via-holes implemented in the central patch of each row constituting the array, which connects the patch to the leaky-wave open-ended feeding slot-lines running underneath the patches. The slot-lines are connected to each other with a slit. A waveguide port is used to excite the array via slot-lines that couple the electromagnetic energy to the patches. The metasurface on-chip antenna is shown to exhibit an average measured gain in excess of 10 dBi and radiation efficiency above 60% over a wide frequency range from 0.41 to 0.47 THz, which is significant development over other on-chip antenna techniques reported to date. Dimensions of the antenna are 8.6 × 8.6 × 0.0503 mm3. The results show that the proposed GaAs-based metasurface on-chip antenna is viable for applications in terahertz integrated circuits., This work is partially supported by RTI2018-095499-B-C31, Funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE), and innovation programme under Grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/E022936/1.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

MM-Wave phased array Quasi-Yagi antenna for the upcoming 5G cellular communications

  • Parchin, Naser Ojaroudi
  • Alibakhshikenari, Mohammad
  • Basherlou, Haleh Jahanbakhsh
  • Abd-Alhameed, Raed A.
  • Rodriguez, Jonathan
  • Rodríguez Alonso, Jose
  • Limiti, Ernesto
This article belongs to the Special Issue Millimeter-wave and Terahertz Applications of Metamaterials., The focus of this manuscript was to propose a new phased array antenna design for the fifth generation (5G) mobile platforms. Eight elements of compact Quasi-Yagi antennas were placed on the top portion of smartphone printed circuits board (PCB) to form a beam-steerable phased array design. The −10 dB impedance-bandwidth of proposed 5G smartphone antenna spans from 25 GHz to 27 GHz providing 2 GHz bandwidth with less than −16 dB mutual coupling function. A coax-to-microstripline with a truncated crown of vias around the coaxial cable was used as a feeding mechanism for each radiation element. An Arlon Ad 350 substance with properties of ε = 3.5, δ = 0.003, and h = 0.8 mm was chosen as the antenna substrate. The proposed phased array antenna provides wide-angle scanning of 0°~75° with more than 10 dB realized gain levels. For the scanning angle of 0°~60°, the antenna array provides more than 90% (−0.5 dB) radiation and total efficiencies. In addition, the specific absorption rate (SAR) function and radiation performance of the design in the presence of the user-hand/user-hand have been studied. The results validate the feasibility of the proposed design for use in the 5G handheld devices. Furthermore, using the presented Quasi-Yagi elements, the radiation properties of 2 × 2, 4 × 4, and 8 × 8 planar arrays were studied and more than 8.3, 13.5, and 19.3 dBi directivities have been achieved for the designed planar arrays. The results show that the designed arrays (linear & planar) satisfy the general requirements for use in 5G platforms., This project has received funding from the European Union's Horizon 2020 Research and Innovation Programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Network-coded cooperation and multi-connectivity for massive content delivery

  • Leyva-Mayorga, Israel
  • Torre, Roberto
  • Pandi, Sreekrishna
  • Nguyen, Giang T.
  • Fitzek, Frank H. P.
  • Pla, Vicent|||0000-0002-0894-9494
  • Martínez Bauset, Jorge|||0000-0003-3342-3037
[EN] Massive content delivery is in the spotlight of the research community as both data traffic and the number of connected mobile devices are increasing at an incredibly fast pace. The enhanced mobile broadband (eMBB) is one of the main use cases for the fifth generation of mobile networks (5G), which focuses on transmitting greater amounts of data at higher data rates than in the previous generations, but also on increasing the area capacity (given in bits per second per square meter) and reliability. However, the broadcast and multicast implementation in 5G and presents several drawbacks such as unexpected disconnections and the lack of device-specific QoS guarantees. As a result, whenever the exact same content is to be delivered to numerous mobile devices simultaneously, this content must be replicated. Hence, the same number of parallel unicast sessions as users are needed. Therefore, novel systems that provide efficient massive content delivery and reduced energy consumption are needed. In this paper, we present a network-coded cooperation (NCC) protocol for efficient massive content delivery and the analytical model that describes its behavior. The NCC protocol combines the benefits of cooperative architectures known as mobile clouds (MCs) with Random Linear Network Coding (RLNC). Our results show the benefits of our NCC protocol when compared to the establishment of numerous parallel unicast sessions are threefold: offload data traffic from the cellular link, reduce the energy consumption at the cooperating users, and provide throughput gains when the cellular bandwidth is insufficient., This work was supported in part by the European Union's H2020 Research and Innovation Program under Grant H2020-MCSA-ITN-2016-SECRET 722424. The work of Vicent Pla and Jorge Martinez-Bauset was supported under Grant PGC2018-094151-B-I00 and Grant RED2018-102585-T (MCIU/AEI/FEDER,UE)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Wideband printed monopole antenna for application in wireless communication systems

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Falcone Lanas, Francisco
Empirical results of an electrically small printed monopole antenna are described with a fractional bandwidth of 185% (115 MHz to 2.90 GHz) for return-loss better than 10 dB, peak gain and radiation efficiency at 1.45 GHz of 2.35 dBi and 78.8%, respectively. The antenna geometry can be approximated to a back-to-back triangular shaped patch structure that is excited through a common feed-line with a meander-line T-shape divider. The truncated ground-plane includes a central stub located underneath the feed-line. The impedance bandwidth of the antenna is enhanced with the inclusion of meander-line slots in the patch and four double split-ring resonators on the underside of the radiating patches. The antenna radiates approximately omni-directionally to provide coverage over a large part of very high frequency, the whole of ultrahigh frequency, the whole of L-band and some parts of S-band. The antenna has dimensions of 48.32 × 43.72 × 0.8 mm 3 , which is corresponding to the electrical size of 0.235 λ 0 × 0.211 λ 0 × 0.003 λ 0 , where λ 0 is the free-space wavelength at 1.45 GHz. The proposed low-profile low-cost antenna is suitable for application in wideband wireless communications systems., This work is partially supported by innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Impedance bandwidth improvement of a planar antenna based on metamaterial-inspired T-matching network

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Shukla, Panchamkumar
  • Wang, Yan
  • Azpilicueta Fernández de las Heras, Leyre
  • Naser Moghadasi, Mohammad
  • See, Chan H.
  • Elfergani, Issa
  • Zebiri, Chemseddine
  • Abd-Alhameed, Raed
  • Huynen, Isabelle
  • Rodriguez, Jonathan
  • Denidni, Tayeb A.
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
In this paper a metamaterial-inspired T-matching network is directly imbedded inside the feedline of a microstrip antenna to realize optimum power transfer between the front-end of an RF Wireless transceiver and the antenna. The proposed T-matching network, which is composed of an arrangement of series capacitor, shunt inductor, series capacitor, exhibits left-handed metamaterial characteristics. The matching network is first theoretically modelled to gain insight of its limitations. It was then implemented directly in the 50-Ω feedline to a standard circular patch antenna, which is an unconventional methodology. The antenna’s performance was verified through measurements. With the proposed technique there is 2.7 dBi improvement in the antenna’s radiation gain and 12% increase in the efficiency at the center frequency,and this is achieved over a significantly wider frequency range by a factor of approximately twenty. Moreover, there is good correlation between the theoretical model, method of moments simulation, and the measurement results., This work was supported in part by the Ministerio de Ciencia, Innovacion y Universidades, Gobierno de Espana (MCIU/AEI/FEDER,UE), under Grant RTI2018-095499-B-C31, in part by the British Council (UK-China-BRI Countries Education Partnership Initiative 2019), in part by the Innovation Programme under Grant H2020-MSCA-ITN-2016 SECRET-722424, and in part by the U.K. Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

A comprehensive survey of 'metamaterial transmission-line based antennas: design, challenges, and applications'

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Azpilicueta Fernández de las Heras, Leyre
  • Naser Moghadasi, Mohammad
  • Falcone Lanas, Francisco
In this review paper, a comprehensive study on the concept, theory, and applications of composite right/left-handed transmission lines (CRLH-TLs) by considering their use in antenna system designs have been provided. It is shown that CRLH-TLs with negative permittivity (< 0) and negative permeability (μ < 0) have unique properties that do not occur naturally. Therefore, they are referred to as artificial structures called 'metamaterials'. These artificial structures include series left-handed (LH) capacitances (CL), shunt LH inductances (LL), series right-handed (RH) inductances (LR), and shunt RH capacitances (CR) that are realized by slots or interdigital capacitors, stubs or via-holes, unwanted current flowing on the surface, and gap distance between the surface and ground-plane, respectively. In the most cases, it is also shown that structures based on CRLH metamaterial-TLs are superior than their conventional alternatives, since they have smaller dimensions, lower-profile, wider bandwidth, better radiation patterns, higher gain and efficiency, which make them easier and more cost-effective to manufacture and mass produce. Hence, a broad range of metamaterial-based design possibilities are introduced to highlight the improvement of the performance parameters that are rare and not often discussed in available literature. Therefore, this survey provides a wide overview of key early-stage concepts of metematerial-based designs as a thorough reference for specialist antennas and microwave circuits designers. To analyze the critical features of metamaterial theory and concept, several examples are used. Comparisons on the basis of physical size, bandwidth, materials, gain, efficiency, and radiation patterns are made for all the examples that are based on CRLH metamaterial-TLs. As revealed in all the metematerial design examples, foot-print area decrement is an important issue of study that have a strong impact for the enlargement of the next generation wireless communication systems., This work was supported in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE) under Grant RTI2018-095499-B-C31, in part by the Innovation Programme under Grant H2020-MSCA-ITN-2016 SECRET-722424, and in part by the financial support from the U.K. Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Silicon-based 0.450-0.475 THz series-fed double dielectric resonator on-chip antenna array based on metamaterial properties for integrated-circuits

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
The antenna array designed to operate over 0.450-0.475 Terahertz comprises two dielectric resonators (DRs) that are stacked vertically on top of each other and placed on the surface of the slot antenna fabricated on a silicon substrate using standard CMOS technology. The slot created in the silicon substrate is meandering and is surrounded by metallic via-wall to prevent energy dissipation. The antenna has a maximum gain of 4.5dBi and radiation efficiency of 45.7% at 0.4625 THz. The combination of slot and vias transform the antenna to a metamaterial structure that provides a relatively small antenna footprint. The proposed series-fed double DRs on-chip antenna array is useful for applications in THz integrated circuits., This work is partially supported by innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E0/22936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Study on improvement of the performance parameters of a novel 0.41–0.47 THz on-chip antenna based on metasurface concept realized on 50 μm GaAs-layer

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • See, Chan H.
  • Shukla, Panchamkumar
  • Falcone Lanas, Francisco
A feasibility study is presented on the performance parameters of a novel on-chip antenna based on metasurface technology at terahertz band. The proposed metasurface on-chip antenna is constructed on an electrically thin high-permittivity gallium arsenide (GaAs) substrate layer. Metasurface is implemented by engraving slot-lines on an array of 11 × 11 circular patches fabricated on the top layer of the GaAs substrate and metallic via-holes implemented in the central patch of each row constituting the array, which connects the patch to the leaky-wave open-ended feeding slot-lines running underneath the patches. The slot-lines are connected to each other with a slit. A waveguide port is used to excite the array via slot-lines that couple the electromagnetic energy to the patches. The metasurface on-chip antenna is shown to exhibit an average measured gain in excess of 10 dBi and radiation efficiency above 60% over a wide frequency range from 0.41 to 0.47 THz, which is significant development over other on-chip antenna techniques reported to date. Dimensions of the antenna are 8.6 × 8.6 × 0.0503 mm3. The results show that the proposed GaAs-based metasurface on-chip antenna is viable for applications in terahertz integrated circuits., This work is partially supported by RTI2018-095499-B-C31, Funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE), and innovation programme under Grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

A new study to suppress mutual-coupling between waveguide slot array antennas based on metasurface bulkhead for MIMO systems

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Khalily, Mohsen
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
In this paper, a new method is proposed to reduce mutual coupling between waveguide slot array (WSA) antennas based on metasurface technology. This is achieved by placing a metasurface bulkhead between the two WSA antennas. Performance of the dual-waveguide antenna structure is shown to substantially enhance when compared against an identical reference WSA antenna with no metasurface. WSA antennas used in the study has dimensions 40×20×5mm 3 and operates over 1.7-3.66 GHz, which corresponds to a fractional bandwidth of 73.13%. The average isolation of the reference WSA antennas is -20 dB; however, with a metasurface bulkhead the isolation is shown to increase to -36.5 dB. In addition, the bandwidth extends by ~10%, and the gain improves by 14.66%. The proposed method is should find application in MIMO systems where high isolation between neighbouring radiation elements is required to improve the antenna characteristics, and mimimise array phase errors, which is necessary to enhance the system performance., This work is partially supported by innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Optimum power transfer in RF front end systems using adaptive impedance matching technique

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Azpilicueta Fernández de las Heras, Leyre
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Althuwayb, Ayman Abdulhadi
  • Falcone Lanas, Francisco
  • Huynen, Isabelle
  • Denidni, Tayeb A.
  • Limiti, Ernesto
Matching the antenna’s impedance to the RF-front-end of a wireless communications system is challenging as the impedance varies with its surround environment. Autonomously matching the antenna to the RF-front-end is therefore essential to optimize power transfer and thereby maintain the antenna’s radiation efficiency. This paper presents a theoretical technique for automatically tuning an LC impedance matching network that compensates antenna mismatch presented to the RF-front-end. The proposed technique converges to a matching point without the need of complex mathematical modelling of the system comprising of non-linear control elements. Digital circuitry is used to implement the required matching circuit. Reliable convergence is achieved within the tuning range of the LC-network using control-loops that can independently control the LC impedance. An algorithm based on the proposed technique was used to verify its effectiveness with various antenna loads. Mismatch error of the technique is less than 0.2%. The technique enables speedy convergence (< 5 µs) and is highly accurate for autonomous adaptive antenna matching networks., This work is partially supported by RTI2018-095499-B-C31, Funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE), and innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

High-gain on-chip antenna design on silicon layer with aperture excitation for terahertz applications

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Khalily, Mohsen
  • See, Chan H.
  • Falcone Lanas, Francisco
This letter investigates the feasibility of designing a high gain on-chip antenna on silicon technology for subterahertz applications over a wide-frequency range. High gain is achieved by exciting the antenna using an aperture fed mechanism to couple electromagnetics energy from a metal slot line, which is sandwiched between the silicon and polycarbonate substrates, to a 15-element array comprising circular and rectangular radiation patches fabricated on the top surface of the polycarbonate layer. An open ended microstrip line, which is orthogonal to the metal slot-line, is implemented on the underside of the silicon substrate. When the open ended microstrip line is excited it couples the signal to the metal slot-line which is subsequently coupled and radiated by the patch array. Measured results show the proposed on-chip antenna exhibits a reflection coefficient of less than-10 dB across 0.290-0.316 THz with a highest gain and radiation efficiency of 11.71 dBi and 70.8%, respectively, occurred at 0.3 THz. The antenna has a narrow stopband between 0.292 and 0.294 THz. The physical size of the presented subterahertz on-chip antenna is 20 × 3.5 × 0.126 mm3., This work was supported in part by RTI2018-095499-B-C31, funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE), and Innovation Programme under Grant agreement H2020-MSCA-ITN-2016 SECRET-722424, and in part by U.K. EPSRC under Grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Meta-surface wall suppression of mutual coupling between microstrip patch antenna arrays for THz-band applications

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Shukla, Panchamkumar
  • See, Chan H.
  • Falcone Lanas, Francisco
This paper presents a novel 2D meta-surface wall to increase the isolation between microstrip patch radiators in an antenna array that is operating in the teraherz (THz) band of 139-141 GHz for applications including communications, medical and security screening systems. The meta-surface unit-cell comprises conjoined twin 'Y-shape' microstrip structures, which are inter-digitally interleaved together to create the meta-surface wall. The proposed meta-surface wall is free of via holes and defected ground-plane hence easing its fabrication. The meta-surface wall is inserted tightly between the radiating elements to reduce surface wave mutual coupling. For best isolation performance the wall is oriented orthogonal to the patch antennas. The antenna array exhibits a gain of 9.0 dBi with high isolation level of less than -63 dB between transmit and receive antennas in the specified THz-band. The proposed technique achieves mutual coupling suppression of more than 10 dB over a much wider frequency bandwidth (2 GHz) than achieved to date. With the proposed technique the edge-to-edge gap between the transmit and receive patch antennas can be reduced to 2.5 mm. Dimensions of the transmit and receive patch antennas are 5×5 mm2 with ground-plane size of 9×4.25 mm2 when being constructed on a conventional lossy substrate with thickness of 1.6 mm., This work is partially supported by innovation programme under grant agreement H2020-MSCAITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

High-isolation antenna array using SIW and realized with a graphene layer for sub-terahertz wireless applications

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Salekzamankhani, Shahram
  • Aïssa, Sonia
  • See, Chan H.
  • Soin, Navneet
  • Fishlock, Sam J.
  • Althuwayb, Ayman Abdulhadi
  • Abd-Alhameed, Raed
  • Huynen, Isabelle
  • McLaughlin, James A.
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
This paper presents the results of a study on developing an effective technique to increase the performance characteristics of antenna arrays for sub-THz integrated circuit applications. This is essential to compensate the limited power available from sub-THz sources. Although conventional array structures can provide a solution to enhance the radiation-gain performance however in the case of small-sized array structures the radiation properties can be adversely affected by mutual coupling that exists between the radiating elements. It is demonstrated here the effectiveness of using SIW technology to suppress surface wave propagations and near field mutual coupling effects. Prototype of 2x3 antenna arrays were designed and constructed on a polyimide dielectric substrate with thickness of 125 mu m for operation across 0.19-0.20 THz. The dimensions of the array were 20x13.5x0.125 mm(3). Metallization of the antenna was coated with 500 nm layer of Graphene. With the proposed technique the isolation between the radiating elements was improved on average by 22.5 dB compared to a reference array antenna with no SIW isolation. The performance of the array was enhanced by transforming the patch to exhibit metamaterial characteristics. This was achieved by embedding the patch antennas in the array with sub-wavelength slots. Compared to the reference array the metamaterial inspired structure exhibits improvement in isolation, radiation gain and efficiency on average by 28 dB, 6.3 dBi, and 34%, respectively. These results show the viability of proposed approach in developing antenna arrays for application in sub-THz integrated circuits., This work was supported in part by the Ministerio de Ciencia, Innovacion y Universidades, Gobierno de Espana (MCIU/AEI/FEDER, UE) under Grant RTI2018-095499-B-C31, in part by the Innovation Programme under Grant H2020-MSCA-ITN-2016 SECRET-722424, and in part by the U.K. Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Antenna mutual coupling suppression over wideband using embedded periphery slot for antenna arrays

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Shukla, Panchamkumar
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Khalily, Mohsen
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
This paper presents a new approach to suppress interference between neighbouring radiating elements resulting from surface wave currents. The proposed technique will enable the realization of low-profile implementation of highly dense antenna configuration necessary in SAR and MIMO communication systems. Unlike other conventional techniques of mutual coupling suppression where a decoupling slab is located between the radiating antennas the proposed technique is simpler and only requires embedding linear slots near the periphery of the patch. Attributes of this technique are (i) significant improvement in the maximum isolation between the adjacent antennas by 26.7 dB in X-band and >15 dB in Ku and K-bands; (ii) reduction in edge-to-edge gap between antennas to 10 mm (0.37 ); and (iii) improvement in gain by >40% over certain angular directions, which varies between 4.5 dBi and 8.2 dBi. The proposed technique is simple to implement at low cost., This work is partially supported by innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Metamaterial-inspired antenna array for application in microwave breast imaging systems for tumor detection

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Shukla, Panchamkumar
  • Ojaroudi Parchin, Naser
  • Azpilicueta Fernández de las Heras, Leyre
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Falcone Lanas, Francisco
  • Huynen, Isabelle
  • Denidni, Tayeb A.
  • Limiti, Ernesto
This paper presents a study of a planar antenna-array inspired by the metamaterial concept where the resonant elements have sub-wavelength dimensions for application in microwave medical imaging systems for detecting tumors in biological tissues. The proposed antenna consists of square-shaped concentric-rings which are connected to a central patch through a common feedline. The array structure comprises several antennas that are arranged to surround the sample breast model. One antenna at a time in the array is used in transmission-mode while others are in receive-mode. The antenna array operates over 2-12 GHz amply covering the frequency range of existing microwave imaging systems. Measured results show that compared to a standard patch antenna array the proposed array with identical dimensions exhibits an average radiation gain and efficiency improvement of 4.8 dBi and 18%, respectively. The average refiection-coefficient of the array over its operating range is better than S11 = -20 dB making it highly receptive to weak signals and minimizing the distortion encountered with the transmission of short duration pulse-trains. Moreover, the proposed antenna-array exhibits high-isolation on average of 30dB between radiators. This means that antennas in the array (i) can be closely spaced to accommodate more radiators to achieve higher-resolution imaging scans, and (ii) the imagining scans can be done over a wider frequency range to ascertain better contrast in electrical parameters between malignant tumor-tissue and the surrounding normal breast-tissue to facilitate the detection of breast-tumor. It is found that short wavelength gives better resolution. In this experimental study a standard biomedical breast model that mimics a real-human breast in terms of dielectric and optical properties was used to demonstrate the viability of the proposed antenna over a standard patch antenna in the detection and the localization of tumor. These results are encouraging for clinical trials and further refinement of the antenna-array., This work was partially supported by RTI2018-095499-B-C31, funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE), and Innovation Programme under Grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the U.K. Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Study on on-chip antenna design based on metamaterial-inspired and substrate-integrated waveguide properties for millimetre-wave and THz integrated-circuit applications

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Althuwayb, Ayman Abdulhadi
  • Aïssa, Sonia
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
This paper presents the results of a study on improving the performance parameters such as the impedance bandwidth, radiation gain and efficiency, as well as suppressing substrate loss of an innovative antenna for on-chip implementation for millimetre-wave and terahertz integrated-circuits. This was achieved by using the metamaterial and the substrate-integrated waveguide (SIW) technologies. The on-chip antenna structure comprises five alternating layers of metallization and silicon. An array of circular radiation patches with metamaterial-inspired crossed-shaped slots are etched on the top metallization layer below which is a silicon layer whose bottom surface is metalized to create a ground plane. Implemented in the silicon layer below is a cavity above which is no ground plane. Underneath this silicon layer is where an open-ended microstrip feedline is located which is used to excite the antenna. The feed mechanism is based on the coupling of the electromagnetic energy from the bottom silicon layer to the top circular patches through the cavity. To suppress surface waves and reduce substrate loss, the SIW concept is applied at the top silicon layer by implementing the metallic via holes at the periphery of the structure that connect the top layer to the ground plane. The proposed on-chip antenna has an average measured radiation gain and efficiency of 6.9 dBi and 53%, respectively, over its operational frequency range from 0.285–0.325 THz. The proposed on-chip antenna has dimensions of 1.35 × 1 × 0.06 mm3. The antenna is shown to be viable for applications in millimetre-waves and terahertz integrated-circuits. © 2020, The Author(s)., Open access funding provided by Università degli Studi di Roma Tor Vergata within the CRUI-CARE Agreement. This work is partially supported by RTI2018-095499-B-C31, Funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE), innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

High-performance 50μm silicon-based on-chip antenna with high port-to-port isolation implemented by metamaterial and SIW concepts for THz integrated systems

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
A novel 50μm Silicon-based on-chip antenna is presented that combines metamaterial (MTM) and substrate integrated waveguide (SIW) technologies for integration in THz circuits operating from 0.28 to 0.30 THz. The antenna structure comprises a square patch antenna implemented on a Silicon substrate with a ground-plane. Embedded diagonally in the patch are two T-shaped slots and the edges of the patch is short-circuited to the ground-plane with metal vias, which convert the structure into a substrate integrated waveguide. This structure reduces loss resulting from surface waves and Silicon dielectric substrate. The modes in the structure can be excited through two coaxial ports connected to the patch from the underside of the Silicon substrate. The proposed antenna structure is essentially transformed to exhibit metamaterial properties by realizing two T-shaped slots, which enlarges the effective aperture area of the miniature antenna and significantly enhances its impedance bandwidth and radiation characteristics between 0.28 THz to 0.3 THz. It has an average gain and efficiency of 4.5dBi and 65%, respectively. In addition, it is a self-isolated structure with high isolation of better than 30dB between the two ports. The on-chip antenna has dimensions of 800x800x60μm3, This work is partially supported by innovation programme under grant agreement H2020 -MSCA-ITN-2016 SECRET 722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/EO/22936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Interaction between closely packed array antenna elements using meta-surface for applications such as MIMO systems and synthetic aperture radars

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Shukla, Panchamkumar
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Khalily, Mohsen
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
The paper presents a technique to enhance the isolation between adjacent radiating elements that is common in densely packed antenna arrays. Such antennas provide frequency beam-scanning capability needed in multiple-input multiple-output (MIMO) systems and synthetic aperture radars. The method proposed here uses a metamaterial decoupling slab (MTM-DS), which is located between radiating elements, to suppress mutual coupling between the elements that would otherwise degrade the antenna efficiency and performance in both the transmit and receive mode. The proposed MTM-DS consists of mirror imaged E-shaped slits engraved on a microstrip patch with inductive stub. Measured results confirm over 9–11 GHz with no MTM-DS the average isolation (S12) is −27 dB; however, with MTM-DS the average isolation improves to −38 dB. With this technique the separation between the radiating element can be reduced to 0.66λ0, where λ0 is free space wavelength at 10 GHz. In addition, with this technique there is 15% improvement in operating bandwidth. At frequencies of high impedance match of 9.95 and 10.63 GHz the gain is 4.52 and 5.40 dBi, respectively. Furthermore, the technique eliminates poor front-to-back ratio encountered in other decoupling methods. MTM-DS is also relatively simple to implement. Assuming adequate space is available between adjacent radiators the MTM-DS can be fixed retrospectively on existing antenna arrays, which makes the proposed method versatile. ©2018. American Geophysical Union. All Rights Reserved., This work is partially supported byInnovation Programme under grant agreement H2020-MSCA-ITN-2016SECRET-722424 and the financialsupport from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1. The authors confirm that there is no relevant domain or general repository for the data. The authors have arranged for all data to be contained in the manuscript (not a repository) for reviewers andreaders to access them, and the acknowledgments section affirms this.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

A novel 0.3-0.31 THz GaAs-based transceiver with on-chip slotted metamaterial antenna based on SIW technology

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
This paper presents a novel on-chip antenna with fully integrated 0.3-0.31 THz transceiver is implemented on 0.5μm GaAs substrate, and comprises a voltage-controlled oscillator (VCO), a buffer amplifier, a modulator stage, a power-amplifier, a frequency-tripler, and an on-chip antenna. The proposed on-chip antenna design is based on metamaterial (MTM) slots and substrate integrated waveguide (SIW) technologies. The SIW antenna operates as a high-pass filter and an on-chip radiator to suppress the unwanted harmonics and radiate the desired signal, respectively. Dimensions of the on-chip antenna are 2×1×0.0006 mm3. The proposed on-chip antenna has an average radiation gain and efficiency of >1.0 dBi and 55%, respectively. The transceiver provides an average output power of-15 dBm over 0.3-0.31 THz, which is suitable for near-field active imaging applications at terahertz region., This work is partially supported by innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK EPSRC under grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Double-port slotted-antenna with multiple miniaturized radiators for wideband wireless communication systems and portable devices

  • Alibakhshikenari, Mohammad
  • Khalily, Mohsen
  • Virdee, Bal S.
  • Ali, Abdul
  • Shukla, Panchamkumar
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
Proof-of-concept is presented of a novel slot antenna structure with two excitation ports. Although this antenna provides a wide impedance bandwidth, its peak gain and optimum radiation efficiency are observed at its mid-band operational frequency. The antenna structure is etched on the top side of a dielectric substrate with a ground plane. The antenna essentially consists of a rectangular patch with two dielectric slots in which multiple coupled patch arms embedded with H-shaped slits are loaded. The two dielectric slots are isolated from each other with a large H-shaped slit. The radiation characteristics of the proposed antenna in terms of impedance bandwidth, gain and efficiency can be significantly improved by simply increasing the number of radiation arms and modifying their dimensions. The antenna’s performance was verified by building and testing three prototype antennas. The final optimized antenna exhibits a fractional bandwidth of 171% (0.5–6.4 GHz) with a peak gain and maximum radiation efficiency of 5.3 dBi and 75% at 4.4 GHz, respectively. The antenna has physical dimensions of 27×37×1.6 mm3 corresponding to electrical size of 0.0452λ0 ×0.0627λ0 ×0.0026λ0,where λ0 is freespace wavelength at 0.5 GHz. The antenna is compatible for integration in handsets and other broadband wireless systems that operate over L-, S-, and C-bands., This work is partially supported by innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Surface wave reduction in antenna arrays using metasurface inclusion for MIMO and SAR systems

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
An effective method is presented for suppressing mutual coupling between adjacent radiating elements which is based on metasurface isolation for multiple-input multiple-output (MIMO) and synthetic aperture radar (SAR) systems. This is achieved by choking surface current waves induced over the patch antenna by inserting a cross-shaped metasurface structure between the radiating elements. Each arm of the cross-shaped structure constituting the metasurface is etched with meander line slot. Effectiveness of the metasurface is demonstrated for a 2 × 2 antenna array that operates over six frequency subbands in X, Ku, and K bands. With the proposed technique, the maximum improvement achieved in attenuating mutual coupling between neighboring antennas is 8.5 dB (8–8.4 GHz), 28 dB (9.6–10.8 GHz), 27 dB (11.7–12.6 GHz), 7.5 dB (13.4–14.2 GHz), 13 dB (16.5–16.8 GHz), and 22.5 dB (18.5–20.3 GHz). Furthermore, with the proposed technique (i) minimum center-to-center separation between the radiating elements can be reduced to 0.26λ0, where λ0 is 8.0 GHz; (ii) use of ground-plane or defected ground structures are unnecessary; (iii) use of short-circuited via-holes are avoided; (iv) it eliminates the issue with poor front-to-back ratio; and (v) it can be applied to existing arrays retrospectively., This work is partially supported by innovation programme under grant agreement H2020‐MSCA‐ITN‐2016 SECRET‐722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

A comprehensive survey on "Various decoupling mechanisms with focus on metamaterial and metasurface principles applicable to SAR and MIMO antenna systems"

  • Alibakhshikenari, Mohammad
  • Babaeian, Fatemeh
  • Virdee, Bal S.
  • Aïssa, Sonia
  • Azpilicueta Fernández de las Heras, Leyre
  • See, Chan H.
  • Falcone Lanas, Francisco
  • Althuwayb, Ayman Abdulhadi
  • Huynen, Isabelle
  • Abd-Alhameed, Raed
  • Limiti, Ernesto
Nowadays synthetic aperture radar (SAR) and multiple-input-multiple-output (MIMO) antenna systems with the capability to radiate waves in more than one pattern and polarization are playing a key role in modern telecommunication and radar systems. This is possible with the use of antenna arrays as they offer advantages of high gain and beamforming capability, which can be utilized for controlling radiation pattern for electromagnetic (EM) interference immunity in wireless systems. However, with the growing demand for compact array antennas, the physical footprint of the arrays needs to be smaller and the consequent of this is severe degradation in the performance of the array resulting from strong mutual-coupling and crosstalk effects between adjacent radiating elements. This review presents a detailed systematic and theoretical study of various mutual-coupling suppression (decoupling) techniques with a strong focus on metamaterial (MTM) and metasurface (MTS) approaches. While the performance of systems employing antenna arrays can be enhanced by calibrating out the interferences digitally, however it is more ef cient to apply decoupling techniques at the antenna itself. Previously various simple and cost-effective approaches have been demonstrated to effectively suppress unwanted mutual-coupling in arrays. Such techniques include the use of defected ground structure (DGS), parasitic or slot element, dielectric resonator antenna (DRA), complementary split-ring resonators (CSRR), decoupling networks, P.I.N or varactor diodes, electromagnetic bandgap (EBG) structures, etc. In this review, it is shown that the mutual-coupling reduction methods inspired by MTM and MTS concepts can provide a higher level of isolation between neighbouring radiating elements using easily realizable and cost-effective decoupling con gurations that have negligible consequence on the array's characteristics such as bandwidth, gain and radiation ef ciency, and physical footprint., This work was supported in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE) under Grant RTI2018-095499-B-C31, in part by the Innovation Programme under Grant H2020-MSCA-ITN-2016 SECRET-722424, and in part by the U.K. Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Automated reconfigurable antenna impedance for optimum power transfer

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
This paper presents an approach to implement an automatically tuning antenna for optimising power transfer suitable for software defined radio (SDR). Automatic tuning is accomplished using a closed loop impedance tuning network comprising of an impedance sensor and control unit. The sensor provides the control unit with data on the transmit or receive power, and the algorithm is used to impedance of a T-network of LC components to optimize the antenna impedance to maximise power transmission or reception. The effectiveness of the proposed tuning algorithm in relation to impedance matching and convergence on the optimum matching network goal is shown to be superior compared with the conventional tuning algorithm., This work is partially supported by innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

New approach to suppress mutual coupling between longitudinal-slotted arrays based on SIW antenna loaded with metal-fences working on VHF/UHF frequency-bands: study, investigation, and principle

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Khalily, Mohsen
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
In this work it is demonstrated that substrate integrated waveguide longitudinal slotted array antenna (SIWLSAA) which is loaded with metal fences exhibits high-isolation across VHF/UHF bands. A reference SIWLSAA used for comparison purpose comprises of 3×6 slotted arrays constructed on the top and bottom sides of the FR-4 lossy substrate has maximum isolation of -63 dB between its radiation slots. Improvement in isolation is demonstrated using a simple new technique based on inserting a metal fence between each row of slot arrays. The resulting isolation is shown to be is better than -83 dB across 200 MHz to 1.0 GHz with gain greater than 1.5 dBi, and side-lobe level less than - 40 dB. The proposed SIWLSAA is compact and has dimensions of 40×10×5 mm 3 (0.026?×0.006?×0.0020) where ? is 200 MHz. The proposed structure should find application in multiple-input multiple-output (MIMO) and radar systems., This work is partially supported by innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Mutual-coupling reduction in metamaterial substrate integrated waveguide slotted antenna arrays using metal fence isolators for SAR and MIMO applications

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
A new type of mutual coupling reduction technique is applied to metamaterial substrate integrated waveguide (SIW) slotted antenna array. The circular shaped reference SIW antenna array is constructed from Alumina substrate with dimensions of 40×5×1.5 mm3. Embedded in the reference antenna are 38 slots with dimensions of 2×1×1.5mm3. The reference SIW antenna operates over X-to Ku-bands with average isolation between the radiation slots of approximately-10Db. Isolation was increased by inserting metal fence isolators (MFIs) between the radiation slots, which increased the isolation by an average of 13dB. In addition, the antenna's impedance matching bandwidth is improved with no degradation in the radiation patterns. With MFIs the maximum gain achieved improves by ~10%. The technique is simple to implement and proposed for synthetic aperture radar (SAR) and multiple input multiple output (MIMO) applications., This work is partially supported by innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the ERDP Yorkshire Innovation 2016-2017, UK.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Overcome the limitations of performance parameters of on-chip antennas based on metasurface and coupled feeding approaches for applications in system-on-chip for THz integrated-circuits

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
This paper proposes a new solution to improve the performance parameters of on-chip antenna designs on standard CMOS silicon (Si.) technology. The proposed method is based on applying the metasurface technique and exciting the radiating elements through coupled feed mechanism. The on-chip antenna is constructed from three layers comprising Si.-GND-Si. layers, so that the ground (GND) plane is sandwiched between two Si. layers. The silicon and ground-plane layers have thicknesses of 20mu m and 5mu m, respectively. The 3×3 array consisting of the asterisk-shaped radiating elements has implemented on the top silicon layer by applying the metasurface approach. Three slot lines in the ground-plane are modelled and located directly under the radiating elements. The radiating elements are excited through the slot-lines using an open-circuited microstrip-line constructed on the bottom silicon layer. The proposed method to excite the structure is based on the coupled feeding mechanism. In addition, by the proposed feeding method the on-chip antenna configuration supresses the substrate losses and surface-waves. The antenna exhibits a large impedance bandwidth of 60GHz from 0.5THz to 0.56THz with an average radiation gain and efficiency of 4.58dBi and 25.37%, respectively. The proposed structure has compact dimensions of 200×200×45μm3. The results shows that, the proposed technique is therefore suitable for on-chip antennas for applications in system-on-chip for terahertz (THz) integrated circuits., This work is partially supported by innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E0/22936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

High-gain metasurface in polyimide on-chip antenna based on CRLH-TL for sub-terahertz integrated circuits

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
Incluye fe de erratas, This paper presents a novel on-chip antenna using standard CMOS-technology based on metasurface implemented on two-layers polyimide substrates with a thickness of 500 μm. The aluminium ground-plane with thickness of 3 μm is sandwiched between the two-layers. Concentric dielectric-rings are etched in the ground-plane under the radiation patches implemented on the top-layer. The radiation patches comprise concentric metal-rings that are arranged in a 3 × 3 matrix. The antennas are excited by coupling electromagnetic energy through the gaps of the concentric dielectric-rings in the ground-plane using a microstrip feedline created on the bottom polyimide-layer. The open-ended feedline is split in three-branches that are aligned under the radiation elements to couple the maximum energy. In this structure, the concentric metal-rings essentially act as series left-handed capacitances CL that extend the effective aperture area of the antenna without affecting its dimensions, and the concentric dielectric rings etched in the ground-plane act as shunt left-handed inductors LL, which suppress the surface-waves and reduce the substrates losses that leads to improved bandwidth and radiation properties. The overall structure behaves like a metasurface that is shown to exhibit a very large bandwidth of 0.350–0.385 THz with an average radiation gain and efficiency of 8.15dBi and 65.71%, respectively. It has dimensions of 6 × 6 × 1 mm3 that makes it suitable for on-chip implementation., This work is partially supported by RTI2018-095499-B-C31, Funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE), and innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Study on antenna mutual coupling suppression using integrated metasurface isolator for SAR and MIMO applications

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Falcone Lanas, Francisco
  • Andujar, A.
  • Anguera, J.
  • Limiti, Ernesto
A metasurface based decoupling structure that is composed of a square-wave slot pattern with exaggerated corners that is implemented on a rectangular microstrip provides high-isolation between adjacent patch antennas for Synthetic Aperture Radar (SAR) and Multi-Input-Multi-Output (MIMO) systems. The proposed 1-2 symmetric array antenna integrated with the proposed decoupling isolation structure is designed to operate at ISM bands of X, Ku, K, and Ka. With the proposed mutual coupling suppression technique (i) the average isolation in the respective ISM bands listed above is 7 dB, 10 dB, 5 dB, and 10 dB; and (ii) edge-to-edge gap between adjacent radiation elements is reduced to 10 mm (0.28λ). The average antenna gain improvement with the metasurface isolator is 2 dBi. © 2018 European Microwave Association., This work is partially supported by innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Super-wide impedance bandwidth planar antenna for microwave and millimeter-wave applications

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
A feasibility study of a novel configuration for a super-wide impedance planar antenna is presented based on a 2 × 2 microstrip patch antenna (MPA) using CST Microwave Studio. The antenna comprises a symmetrical arrangement of four-square patches that are interconnected to each other with cross-shaped high impedance microstrip lines. The antenna array is excited through a single feedline connected to one of the patches. The proposed antenna array configuration overcomes the main drawback of conventional MPA with a narrow bandwidth that is typically <5%. The antenna exhibits a super-wide frequency bandwidth from 20 GHz to 120 GHz for S11 < -15 dB, which corresponds to a fractional bandwidth of 142.85%. The antenna's performance of bandwidth, impedance match, and radiation gain were enhanced by etching slots on the patches. With the inclusion of the slot, the maximum radiation gain and efficiency of the MPA increased to 15.11 dBi and 85.79% at 80 GHz, which showed an improvement of 2.58 dBi and 12.54%, respectively. The dimension of each patch antenna was 4.3 × 5.3 mm2. The results showed that the proposed MPA is useful for various existing and emerging communication systems such as ultra-wideband (UWB) communications, RFID systems, massive multiple-output multiple-input (MIMO) for 5G, and radar systems., This work was partially supported by the Innovation Program under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

High-isolation leaky-wave array antenna based on CRLH-metamaterial implemented on SIW with ±30° frequency beam-scanning capability at millimetre-waves

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
The paper presents a feasibility study on the design of a new metamaterial leaky-wave antenna (MTM-LWA) used in the construction of a 1 × 2 array which is implemented using substrate-integrated waveguide (SIW) technology for millimetre-wave beamforming applications. The proposed 1 × 2 array antenna consists of two LWAs with metamaterial unit-cells etched on the top surface of the SIW. The metamaterial unit-cell, which is an E-shaped transverse slot, causes leakage loss and interrupts current flow over SIW to enhance the array’s performance. The dimensions of the LWA are 40 × 10 × 0.75 mm3. Mutual-coupling between the array elements is suppressed by incorporating a metamaterial shield (MTM-shield) between the two antennas in the array. The LWA operates over a frequency range of 55–65 GHz, which is corresponding to 16.66% fractional bandwidth. The array is shown to exhibit beam-scanning of ±30° over its operating frequency range. Radiation gain in the backward (−30°), broadside (0°), and forward (+30°) directions are 8.5 dBi, 10.1 dBi, and 9.5 dBi, respectively. The decoupling slab is shown to have minimal effect on the array’s performance in terms of impedance bandwidth and radiation specifications. The MTM-shield is shown to suppress the mutual coupling by ~25 dB and to improve the radiation gain and efficiency by ~1 dBi and ~13% on average, respectively., This work is partially supported by grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the UK EPSRC under grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

A new waveguide slot array antenna with high isolation and high antenna bandwidth operation on Ku- and K- Bands for radar and MIMO systems

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Limiti, Ernesto
  • Falcone Lanas, Francisco
In this paper a novel technique is proposed to reduce the mutual coupling between the radiating elements of a waveguide slot array antenna. This is achieved by inserting slots between the waveguide oval shaped slots. The reference waveguide array antenna used in the study was implemented with an arrangement of 3×5 oval shaped slots. By incorporating linear slots between the radiating oval shaped slots in both horizontal and vertical directions significant reduction in mutual coupling is achieved of 24 dB, 20 dB, and 32 dB in the frequency bands of 12.95-13.75 GHz (Ku-band), 15.45-16.85 GHz (Ku-band), and 18.85-23.0 GHz (K-band), respectively. Edge-to-edge distance between the slot radiators is 0.2λ, which is at least twofold smaller than conventional array antennas. With the slot isolators the antenna's minimum and maximum gains improve by 53.5% and 25.5%, respectively. In addition, the radiation patterns are unaffected. The proposed method is simple to implement, low cost solution mass production. © 2018 European Microwave Association., This work is partially supported by innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the ERDP Yorkshire Innovation 2016-2017, UK.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Study on isolation improvement between closely-packed patch antenna arrays based on fractal metamaterial electromagnetic bandgap structures

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • See, Chan H.
  • Abd-Alhameed, Raed
  • Ali, Abdul
  • Hussein Ali, Ammar
  • Falcone Lanas, Francisco
  • Limiti, Ernesto
A decoupling metamaterial (MTM) configuration based on fractal electromagnetic-bandgap (EMBG) structure is shown to significantly enhance isolation between transmitting and receiving antenna elements in a closely-packed patch antenna array. The MTM-EMBG structure is cross-shaped assembly with fractal-shaped slots etched in each arm of the cross. The fractals are composed of four interconnected-'Y-shaped' slots that are separated with an inverted-'T-shaped' slot. The MTM-EMBG structure is placed between the individual patch antennas in a 2 × 2 antenna array. Measured results show the average inter-element isolation improvement in the frequency band of interest is 17, 37 and 17 dB between radiation elements #1 & #2, #1 & #3, and #1 & #4, respectively. With the proposed method there is no need for using metallic-via-holes. The proposed array covers the frequency range of 8-9.25 GHz for X-band applications, which corresponds to a fractional-bandwidth of 14.5%. With the proposed method the edge-to-edge gap between adjacent antenna elements can be reduced to 0.5λ0 with no degradation in the antenna array's radiation gain pattern. Across the array's operating band, the measured gain varies between 4 and 7 dBi, and the radiation efficiency varies from 74.22 and 88.71%. The proposed method is applicable in the implementation of closely-packed patch antenna arrays used in SAR and MIMO systems. © 2018, The Institution of Engineering and Technology., This work was partially supported by innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Improved adaptive impedance matching for RF front-end systems of wireless transceivers

  • Alibakhshikenari, Mohammad
  • Virdee, Bal S.
  • Shukla, Panchamkumar
  • See, Chan H.
  • Falcone Lanas, Francisco
In this paper an automatic adaptive antenna impedance tuning algorithm is presented that is based on quantum inspired genetic optimization technique. The proposed automatic quantum genetic algorithm (AQGA) is used to find the optimum solution for a low-pass passive T-impedance matching LC-network inserted between an RF transceiver and its antenna. Results of the AQGA tuning method are presented for applications across 1.4 to 5 GHz (satellite services, LTE networks, radar systems, and WiFi bands). Compared to existing genetic algorithm-based tuning techniques the proposed algorithm converges much faster to provide a solution. At 1.4, 2.3, 3.4, 4.0, and 5.0 GHz bands the proposed AQGA is on average 75%, 49.2%, 64.9%, 54.7%, and 52.5% faster than conventional genetic algorithms, respectively. The results reveal the proposed AQGA is feasible for real-time application in RF-front-end systems., This work is partially supported by RTI2018-095499-B-C31, Funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE), and innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

A survey on RF and microwave doherty power amplifier for mobile handset applications

  • Sajedin, Maryam
  • Elfergani, I.T.E.
  • Rodríguez, Jonathan
  • Abd-Alhameed, Raed
  • Fernández Barciela, Mónica
This survey addresses the cutting-edge load modulation microwave and radio frequency power amplifiers for next-generation wireless communication standards. The basic operational principle of the Doherty amplifier and its defective behavior that has been originated by transistor characteristics will be presented. Moreover, advance design architectures for enhancing the Doherty power amplifier’s performance in terms of higher efficiency and wider bandwidth characteristics, as well as the compact design techniques of Doherty amplifier that meets the requirements of legacy 5G handset applications, will be discussed., Agencia Estatal de Investigación | Ref. TEC2017-88242-C3-2-R, Fundação para a Ciência e a Tecnologia | Ref. UIDP/50008/2019
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Tesis doctoral (DoctoralThesis)

Secure network coding for next generation wireless networks, Codificación de red segura para redes inalámbricas de proxima generación, Codificación de rede segura para as redes sen fíos de próxima xeración

  • Adat Vasudevan, Vipindev
Emerging fifth-generation (5G) networks and services are being characterized by strict requirements regarding throughput gain and consumed energy. This evolution of wireless mobile networking towards higher data rates and capacity, ultra low latency, and increased resilience is fueled by the rapid penetration of advanced smart mobile applications and their diverse nature in terms of quality of experience, security, and ubiquity. The 5G paradigm as it emerges in recent studies and early pilots adopts a number of technological solutions to form the building blocks of the next generation wireless mobile network architecture and address all these challenges. Specifically, the future networking environment will be characterized by highly dense heterogeneous cells. As the future networking environment begins to materialize, it seems that the concept of cooperated small cells may provide a basis for the mobile cell architecture. Towards this end, Network Coding by incorporating either linear or non-linear coding schemes is being considered as a key enabler for achieving the requirements for increased throughput and high resilience for wireless mobile networks. Nonetheless, network coding deployments still need to consider security vulnerabilities and their countermeasures, before they can be adapted as part of the emerging mobile network deployments. The unique property of network coding that allows coding of packets during transmission also introduces new security challenges like pollution attacks. An adversary can tamper the packets in transition to create pollution attack and it deteriorates the network performance considerably. The pollution attack in network coding is catastrophic due to its nature of spreading to the whole communication channels after the first injection of a polluted packet. Since the packets are mixed or coded and then forwarded at every node, if a polluted packet is not detected, it will also get involved in the process and pollutes all the packets with it. Thus detecting the pollution attack at the earliest point is an important requirement to harness the benefits of network coding in a multi-hop communication. There are different integrity schemes against pollution attacks in network coding. Integrity schemes with homomorphic property over the linear coding of packets are necessary to address the challenges of pollution attacks. However, many of the existing integrity schemes are not efficient to be used in the 5G environment due to scalability limitations in a dense mobile network. This PhD work aims to propose an efficient integrity scheme that is tailor made for the highly dense future wireless networks. The proposed scheme will be based on homomorphic Message Authentication Codes (MACs) supported by a blockchain overlay, providing resistance against pollution attacks in the RLNC-enabled multi-hop D2D network in a small cell environment. This blockchain enhanced integrity scheme ensures that the polluted packet will be detected at the immediate genuine node it reaches with considerably less communication and bandwidth overheads. In addition, the appropriate key management schemes will be defined in order to support effectively the integrity schemes. The correct operation of the defined integrity schemes should result in saving network resources of the multi-hop D2D network., Las redes y servicios emergentes de quinta generación (5G) se caracterizan por los estrictos requisitos relativos a la mejora de “throughput” y la energía consumida. Esta evolución de las redes móviles inalámbricas hacia una mayor velocidad y capacidad de datos, una latencia ultrabaja y una mayor capacidad de recuperación se ve impulsada por la rápida penetración de las aplicaciones móviles inteligentes avanzadas y su naturaleza diversa en cuanto a la calidad de la experiencia, la seguridad y la ubicuidad. El paradigma de las 5G, tal como surge en estudios recientes y en los primeros proyectos piloto, adopta una serie de soluciones tecnológicas para formar los elementos básicos de la arquitectura de la red móvil inalámbrica de próxima generación y hacer frente a todos estos desafíos. Concretamente, el futuro entorno de redes se caracterizará por la existencia de células heterogéneas muy densas. A medida que el futuro entorno de redes comienza a materializarse, parece que el concepto de “small-cells” que cooperan puede proporcionar una base para la arquitectura de las redes celulares móviles. Con este fin, se está considerando la codificación de red (“network coding”), mediante la incorporación de esquemas de codificación lineales o no lineales, como un elemento clave para lograr alcanzar los requisitos de mayor rendimiento y alta resiliencia que deben satisfacer las redes móviles inalámbricas. No obstante, las implantaciones de mecanismos de codificación de red todavía tienen que estudiar las vulnerabilidades de seguridad y sus contramedidas, antes de que puedan integrarse en las redes móviles emergentes. La propiedad única de la codificación de red que permite la codificación de paquetes durante la transmisión también introduce nuevos desafíos de seguridad como los ataques de contaminación (“Pollution Attacks”). Un adversario puede manipular los paquetes en transición para crear un ataque de contaminación y esto deteriora considerablemente el rendimiento de la red. El ataque de contaminación en la codificación de la red es catastrófico debido a su naturaleza de propagación a todos los canales de comunicación después de la primera inyección de un paquete contaminado. Dado que los paquetes se mezclan o codifican y luego se envían a cada nodo, si no se detecta un paquete contaminado, éste también se verá involucrado en el proceso y contaminará todos los paquetes con él. Por lo tanto, la detección del ataque de contaminación en el punto más temprano es un requisito importante para aprovechar los beneficios de la codificación de la red en una comunicación multisalto. Existen diferentes esquemas de integridad contra los ataques de contaminación en la codificación de redes. Los esquemas de integridad con propiedad homomórfica sobre la codificación lineal de los paquetes son necesarios para hacer frente a los desafíos de los ataques de contaminación. Sin embargo, muchos de los esquemas de integridad existentes no son eficientes para ser utilizados en el entorno de 5G debido a las limitaciones de escalabilidad en una red móvil densa. Este trabajo de doctorado tiene como objetivo proponer un esquema de integridad eficiente que esté hecho a la medida de las futuras redes inalámbricas altamente densas. El esquema propuesto se basará en códigos de autenticación de mensajes homomórficos (MAC) apoyados por un overlay blockchain, que proporcionan resistencia contra los ataques de contaminación en la red D2D multisalto habilitada para RLNC en un entorno de small-cells. Este esquema de integridad mejorada con blockchain asegura que el paquete contaminado será detectado en el nodo genuino inmediato al que llega, y se logrará con menos sobrecarga de comunicación y ancho de banda. Además, se definirán los esquemas de gestión de claves apropiados para apoyar eficazmente los esquemas de integridad. El funcionamiento correcto de los esquemas de integridad definidos debería dar lugar a un ahorro de recursos de la red D2D multisalto., As redes e servizos emerxentes de quinta xeración (5G) caracterízanse por estritos requirimentos respecto ao rendemento e á enerxía consumidos. Esta evolución das redes móbiles sen fíos cara a unha maior velocidade e capacidade de datos, unha latencia ultra baixa e unha maior resiliencia está impulsada pola rápida penetración de aplicacións móbiles intelixentes avanzadas e a súa diversa calidade de experiencia, seguridade e ubicuidade. O paradigma 5G, tal e como apareceu nos últimos estudos e nos primeiros proxectos piloto, adopta unha serie de solucións tecnolóxicas para formar os elementos básicos da arquitectura de redes móbiles sen fíos de próxima xeración e afrontar todos estes retos. En concreto, as redes futuras caracterizaranse pola existencia de células heteroxéneas moi densas. A medida que a futura rede de comunicacións se comeza a materializar, parece que o concepto de "small-cells" cooperativas pode fornecer un fundamento para a arquitectura das redes celulares móbiles. Para iso, estase a considerar a codificación en rede (“Network Coding”), a través da incorporación de esquemas de codificación lineais ou non lineais, como un elemento clave para alcanzar os requisitos de maior rendemento e alta resiliencia que deben satisfacer as redes móbiles sen fíos. Non obstante, os despregues de mecanismos de codificación de rede aínda teñen que estudar as vulnerabilidades de seguridade e as súas contramedidas antes de que poidan integrarse en redes móbiles emerxentes. A propiedade exclusiva do cifrado de rede que permite a codificación de paquetes durante a transmisión tamén introduce novos retos de seguridade como os ataques de contaminación (“Pollution Attacks”). Un adversario pode manipular paquetes en transición para crear un ataque de contaminación e isto prexudica significativamente o rendemento da rede. O ataque de contaminación no cifrado da rede é catastrófico debido á súa natureza, o que lle permite estenderse a todas as canles de comunicación despois da primeira inxección dun paquete contaminado. Dado que os paquetes son mesturados ou codificados e logo enviados a cada nodo, se non se detecta un paquete contaminado, tamén estará implicado no proceso e contaminará todos os paquetes con el. Por iso, a detección do ataque de contaminación no primeiro momento é un requisito importante para obter os beneficios do cifrado da rede na comunicación multi-salto. Existen diferentes esquemas de integridade contra ataques de contaminación na codificación da rede. Os esquemas de integridade con propiedade homomórfica sobre codificación lineal de paquetes son necesarios para afrontar os desafíos dos ataques de contaminación. Non obstante, moitos dos esquemas de integridade existentes non son eficientes para o seu uso no ambiente 5G debido ás limitacións de escalabilidade nunha densa rede móbil. Este traballo de doutoramento pretende propoñer un esquema de integridade eficiente e adaptado para futuras redes sen fíos altamente densas. O esquema proposto estará baseado en códigos de autenticación de mensaxes homomorfas (MAC) soportados por unha superposición de blockchain, que proporcionan resistencia contra os ataques de contaminación na rede D2D multi-hop habilitada por RLNC nun ambiente de pequenas celas. Este esquema de integridade mellorado por blockchain asegura que o paquete contaminado será detectado no nodo xenuíno inmediato ao que chega e realizarase con menos sobrecarga e ancho de banda de comunicación. Ademais, definiranse esquemas de xestión clave adecuados para apoiar eficazmente os esquemas de integridade. O funcionamento correcto de esquemas de integridade definidos debería producir un aforro de recursos para a rede D2D de varios saltos.
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Contribución de congreso (ConferenceOutput)

Design of a wideband harmonically tuned Class-J Power Amplifier

  • Sajedin, Maryam
  • Elfergani, Issa
  • Rodriguez, Jonathan
  • Violas, Manuel
  • Abd-Alhameed, Raed
  • Fernández Barciela, Mónica
  • Abdulkhaleq, Ahmed
This paper describes a modern design idea of wideband and high efficient GaN HEMT Class-J power amplifiers. The operation principle of the Class-J mode, based on the second harmonic tuning, is introduced which can maximize the achievable efficiency. Matching network synthesis criteria for wideband frequency response are addressed for 5G power amplifiers design. This wideband harmonically tuned technique is applicable to amplifiers based on adjusting the shape of the waveforms through a a finite number of harmonics, such as Class-F,F−1 and E. Simulation results indicate that Class-J can provide a high drain efficiency of 70% across a 1.5 to 3.2 GHz bandwidth while delivering 10W output power at the 1dB- compression point, using GaN technology., Agencia Estatal de Investigación | Ref. TEC2017-88242-C3-2-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Tesis doctoral (DoctoralThesis)

Radio resource management for hyper dense heterogeneous small cell network in 5G and beyond, Gestión de recursos radio para redes de “small-cells” heterogéneas e hiperdensas en 5G y más allá, Xestión de recursos radio para redes de “small-cells” heteroxéneas e hiper-densas de 5G e máis aló

  • Akhtar , Tafseer
Radio resource and its management is one of the key areas of research where technologies, infrastructure and challenges are rapidly changing as system architecture demands a paradigm shift. The previous generation communication technologies require customizations and upgrades as next generation communication will remain inclusive for significantly long duration. Radio resource management (RRM) schemes that are evolved during LTE/LTE-A network environment period will remain relevant for future, however, these schemes must become more intelligent and adaptive for future as features and requirements of network and users will be diverse and highly demanding. The problem of RRM is multidimensional and different dimensions are presented with their respective solutions such as interference or energy management. Radio resource management is key for satisfying the standard requirements of future environment, as it demands efficient management of interference and spectrum while considering fairness and Quality of Service (QoS) requirements as well. Radio resource management is more challenging in hyper dense Heterogeneous environment due to sheer number of devices and presence of various levels, as both co-tier and cross-tier interference affect this environment. Energy and spectrum management are other key aspects of radio resource management and more efficient approaches are required to handle these challenging issues in future environment. Fairness among users which are randomly distributed in the coverage area of hyper dense heterogeneous network, in terms of resource allocation is another critical task of resource management. The QoS requirements of users in future environment will be diverse in nature and demands of resources will change according to the applications running on the user’s equipment. Ultra-high definition video, online live gaming, time critical applications will require efficient resource management approach for satisfying their resource demands., El recurso del espectro radioeléctrico y su gestión es una de las áreas clave de investigación en la que las tecnologías, la infraestructura y los desafíos están cambiando rápidamente a medida que la arquitectura del sistema exige un cambio de paradigma. Las tecnologías de comunicación de la generación anterior requieren adaptaciones y mejoras, ya que la comunicación de la próxima generación seguirá siendo inclusiva durante mucho tiempo. Los esquemas de gestión de los recursos radioeléctricos (RRM) que se desarrollen durante la evolución de las redes LTE/LTE-A seguirán siendo pertinentes para el futuro, sin embargo, estos esquemas deben ser más inteligentes y adaptables para el futuro, ya que las características y los requisitos de la red y los usuarios serán diversos y muy exigentes. El problema de la RRM es multidimensional y se presentan diferentes dimensiones con sus respectivas soluciones como la interferencia o la gestión de la energía. La gestión de los recursos radioeléctricos es clave para satisfacer los requisitos estándar del entorno futuro, ya que exige una gestión eficiente de la interferencia y del espectro, considerando también la equidad y los requisitos de calidad de servicio (QoS). La gestión de los recursos radioeléctricos es más difícil en un entorno heterogéneo hiperdenso debido al gran número de dispositivos y a la presencia de varios niveles, ya que las interferencias tanto de nivel intermedio como de nivel superior afectan a este entorno. La gestión de la energía y el espectro son otros aspectos clave de la gestión de los recursos radioeléctricos y se requieren enfoques más eficientes para manejar estos temas desafiantes en el futuro. La equidad entre los usuarios que se distribuyen aleatoriamente en la zona de cobertura de la red heterogénea hiperdensa, en lo que respecta a la asignación de recursos, es otra tarea crítica de la gestión de recursos. Los requisitos de calidad de servicio de los usuarios en el entorno futuro serán de naturaleza diversa y las demandas de recursos cambiarán en función de las aplicaciones que se ejecuten en el equipo del usuario. El vídeo de ultra alta definición, los juegos en vivo en línea y las aplicaciones con plazos críticos requerirán un enfoque de gestión de recursos eficiente para satisfacer sus demandas de recursos., O recurso do espectro radioeléctrico e a súa xestión é unha das áreas clave de investigación nas que as tecnoloxías, infraestruturas e retos están cambiando rapidamente a medida que a arquitectura do sistema esixe un cambio de paradigma. As tecnoloxías de comunicación da xeración anterior requiren adaptacións e melloras, xa que a comunicación da próxima xeración seguirá sendo inclusiva durante moito tempo. Os esquemas de xestión de recursos de radio (RRM) desenvolvidos durante a evolución das redes LTE / LTE-A seguirán sendo relevantes para o futuro, non obstante estes esquemas deberían ser máis intelixentes e adaptables para o futuro, xa que o características e requisitos da rede e usuarios serán diversos e moi esixentes. O problema da RRM é multidimensional e preséntanse diferentes dimensións coas súas respectivas solucións como a interferencia ou o manexo de enerxía. A xestión dos recursos de radio é clave para cumprir os requisitos estándar do futuro ambiente, xa que require unha interferencia eficiente e unha xestión do espectro, considerando tamén os requisitos de equidade e calidade do servizo (QoS). A xestión dos recursos radio é máis difícil nun ambiente hiperxenso heteroxéneo debido ao gran número de dispositivos e á presenza de varios niveis, xa que as interferencias de nivel intermedio e superior afectan a este ambiente. O espectro e a xestión enerxética son outros aspectos clave da xestión de recursos de radio e necesítanse enfoques máis eficientes para xestionar estes desafiantes problemas no futuro. A equidade entre os usuarios que se distribúen ao chou na área de cobertura da rede heteroxénea hiperdensa, en termos de asignación de recursos, é outra tarefa crítica da xestión de recursos. A calidade dos requisitos de servizo dos usuarios no contorno futuro será de diversa natureza e as demandas de recursos cambiarán dependendo das aplicacións que se executan no ordenador do usuario. Os vídeos de alta definición, xogos en liña en directo e as aplicacións críticas para o tempo requirirán un enfoque de xestión de recursos eficiente para satisfacer as túas necesidades de recursos.
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

IDLP: An Efficient Intrusion Detection and Location-Aware Prevention Mechanism for Network Coding-Enabled Mobile Small Cells

  • ParsaMehr, Reza|||0000-0002-3461-433X
  • Mantas, Georgios|||0000-0002-8074-0417
  • Rodríguez, Jonathan|||0000-0001-9829-0955
  • Martinez Ortega, Jose Fernan|||0000-0002-7635-4564