Pasar al contenido principal

DESARROLLO TECNOLOGICO AVANZADO DE DISPOSITIVOS PASIVOS EN TECNOLOGIA GUIADA PARA CARGAS UTILES DE SATELITES

TEC2010-21520-C04-01

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Systematic Design Procedure of Classical Dual-Mode Circular Waveguide Filters Using an Equivalent Distributed Model

  • Cogollos, Santiago|||0000-0002-4189-2952
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Brumos Vicente, María
  • Vicente Quiles, Carlos Pascual
  • Gil Raga, Jordi
  • Gimeno Martinez, Benito
  • Guglielmi, Marco
In this paper, we propose a systematic procedure for the accurate design of classical dual-mode filters in circular waveguide technology. The design procedure is based on the previous synthesis of an intermediate distributed model, which links the standard lumped (or coupling matrix) elements circuit with the practical waveguide realization. We then show how the equivalent distributed model can be directly used to obtain the physical dimensions of these filter components (typically rectangular and cross-shaped irises, as well as tuning and coupling screws). The value of this paper lies in the fact that the proposed design strategy provides the final dimensions of these complex structures with unprecedented levels of accuracy and numerical efficiency, as it is shown through two dual-mode filter designs for narrowband applications, and measurements of a manufactured prototype. © 2012 IEEE., This work was supported by the Ministerio de Educacion y Ciencia, Spanish Government, under Research Project TEC2010-21520-C04-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Prediction of multipactor breakdown for multicarrier applications: the quasi-stationary method

  • Anza Hormigo, Sergio
  • Vicente Quiles, Carlos Pascual
  • Gil Raga, Jordi
  • Mattes, Michael
  • Wolk, Dieter
  • Wochner, Ulrich
  • Gimeno Martinez, Benito
  • Raboso García-Baquero, David
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
A new prediction algorithm for multipactor breakdown determination in multicarrier signals is presented. This new algorithm assumes a quasi-stationary (QS) model based on the nonstationary theory for single-carrier signals. It determines the worst case, i.e., the combination of signal phases that yields the lowest breakdown level per carrier, using multipactor electron growth models. It considers the secondary emission yield properties of the material and the time-varying value of the multicarrier signal envelope. Several test samples have been designed and manufactured in order to assess the precision of the proposed method. The experimental results show excellent agreement with the predicted results. The QS prediction technique yields, in general, better accuracy and more relaxed breakdown levels than the existing methods., Manuscript received December 23, 2011; revised April 12, 2012; accepted April 16, 2012. Date of publication May 30, 2012; date of current version June 26, 2012. This work was supported by the European Space Agency (ESA)/European Space Research and Technology Centre (ESTEC) under RF Breakdown in Multicarrier Systems Contract 1-9918/06/NL/GLC, by the Ministerio de Ciencia e Innovacion under Programa Torres Quevedo PTQ06-2-0693, and under Research Project TEC2010-21520-C04-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dual Composite Right-/Left-Handed Coplanar Waveguide Transmission Line Using Inductively Connected Split-Ring Resonators

  • Belenguer Martínez, Ángel
  • Cascón López, Joaquín
  • Lucas Borja, Alejandro
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
In this paper, a simple geometrical modification of the well-known split-ring resonator (SRR) topology is proposed. This modification consists of joining the opposite sides of the rings by means of an inductive connection. Due to this modification, it is possible to synthesize a dual composite right-/left-handed artificial transmission line from a host coplanar waveguide (CPW). In addition, it is quite straightforward to synthesize a dual balanced line showing a wider transmission bandwidth (around 13% for 3 GHz and 8% for 6 GHz) with this new SRR geometry. In fact, in order to design a balanced line, one must just modify the inductance of the direct connection between the rings, which can be derived from the equivalent circuit of this new ring, which is also presented in this paper. The final result is a balanced artificial CPW transmission line with a dual composite right-/left-handed behavior. In this case, the right-handed transmission band is placed below the left-handed one, and there is no frequency separation between both transmission bands. © 1963-2012 IEEE., This work was supported in part by the Ministerio de Ciencia e Innovacion, Spanish Goverment, under Research Projects TEC2010-21520-C04-03 and TEC2010-21520-C04-01 and by the Autonomous Government of Castilla-La Mancha under Research Projects PPII10-0047-0220 and PPII10-0027-1277.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automated synthesis of transmission lines loaded with complementary split ring resonators (CSRRs) and open complementary split ring resonators (OCSRRs) through aggressive space mapping (ASM)

  • Selga, Jordi
  • Rodríguez Pérez, Ana María
  • Orellana, Marco
  • Martín, Ferran
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This paper is focused on the application of space mapping optimization to the automated synthesis of transmission lines loaded with complementary split ring resonators (CSRRs) and open complementary split ring resonators (OCSRRs). These structures are of interest for the implementation of resonant-type metamaterial transmission lines and for the design of planar microwave circuits based on such complementary resonators. The paper presents a method to generate the layouts of CSRR- and OCSRR-loaded microstrip lines from the elements of their equivalent circuit models. Using the so-called aggressive space mapping, a specific implementation that uses quasi-Newton type iteration, we have developed synthesis algorithms that are able to provide the topology of these CSRR and OCSRR-loaded lines in few steps. The most relevant aspect, however, is that this synthesis process is completely automatic, i.e., it does not require any action from the designers, other than initiating the algorithm. Moreover, this technique can be translated to other electrically small planar elements described by lumped element equivalent circuit models., This work has been partially supported by MICIIN-Spain (Projects TEC2010-17512 METATRANSFER, TEC2010-21520-C04-01 AVANSAT, CONSOLIDER EMET CSD2008-00066, and Grant AP2008-04707), Generalitat de Catalunya (Project 2009SGR-421), and MITyC-Spain (Project TSI-020100-2010-169 METASINTESIS). Ferran Martin is in debt to ICREA for supporting his work through an ICREA Academia Award (calls 2008 and 2013).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Wideband passband transmission line based on metamaterial-inspired CPW balanced cells

  • Lucas Borja, Alejandro
  • Belenguer Martínez, Ángel
  • Cascón López, Joaquín
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
In this letter, a balanced metamaterial-inspired coplanar waveguide transmission line with enhanced bandwidth is presented. The coplanar waveguide line is composed of a basic cell with two split-ring resonators, two series capacitances (interdigital capacitors), two wide shunt inductances (metallic strips), and four shunt capacitances (implemented through open-ended stubs). The use of split-ring resonators together with metallic shunt strips provides negative permeability and permittivity, respectively. Likewise, the employment of additional series and shunt capacitances permits to control both the left-and right-handed bands, thus achieving a balanced composite transmission line. The configuration exhibits a wide bandpass response as a result of this balance between advance and delay phase offsets. The interpretation is based on an equivalent circuit model, full-wave electromagnetic analysis, and measured responses of a prototype designed for microwave (C-band) frequency operation. Due to the small dimensions of the resonators employed, the resulting line is very compact. Potential use of these transmission lines can be foreseen in many applications concerning planar microwave devices with severe size restrictions and wide frequency bandpass responses., Manuscript received November 05, 2011; accepted November 27, 2011. Date of publication December 07, 2011; date of current version December 22, 2011. This work was supported by the Ministerio de Ciencia e Innovacion, Spanish Government under Research Project TEC2010-21520-C04 and the Autonomous Government of Castilla-La Mancha under Research Project PPII10-0027-1277.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of split-rings-based artificial transmission lines through a new two-step, fast converging, and robust aggressive space mapping (ASM) algorithm

  • Selga, Jordi
  • Rodríguez Pérez, Ana María
  • Martín, Ferran
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This paper is focused on the synthesis of artificial transmission lines based on complementary split ring resonators (CSRRs). The considered structures are microstrip lines with CSRRs etched in the ground plane and microstrip lines loaded with both CSRRs and series capacitive gaps. An aggressive space mapping (ASM) optimization algorithm, able to automatically generate the layout of these arti ficial lines, has been developed.The tool has been optimized in order to achieve fast convergence and to provide accurate results. The main relevant aspects of the proposed algorithm (based on a n ovel two-step ASM optimization approach) are: 1) the capability to provide the implementable circuit elements of the equivalent circuit model of the considered artificial lines and 2) the ability to converge in a few (unprecedented) iteration steps, due to a new procedure to generate the initial layouts (which are very close to the final ones). First, the software is tested through the synthesis of several CSRR-based microstrip lines, and then some practical application examples of such artificial lines are reported to illustrate the potential of the proposed synthesis tool., This work was supported in part by MICIIN-Spain under Project TEC2010-17512 METATRANSFER, Project TEC2010-21520-C04-01, Project CONSOLIDER EMET CSD2008-00066, and Grant AP2008-04707, Generalitat de Catalunya under Project 2009SGR-421, and MITyC-Spain under Project TSI-020100-2010-169 METASINTESIS.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimized Multipactor-Resistant Wedge-Shaped Waveguide Bandpass Filters

  • Hueso González, Jaime
  • Raboso García-Baquero, David
  • ERNST, CHRISTOPH
  • SCHMITT, DIETMAR
  • Gimeno Martinez, Benito
  • Vicente Quiles, Carlos Pascual
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Taroncher Calduch, Mariam|||0000-0001-9068-1169
[EN] Wedge-shaped waveguides present a certain advantage with respect to rectangular waveguides regarding their resistance to multipactor discharges. In this paper, the optimal configuration for the wedge geometry is investigated based on theoretical results, on a precise multipactor prediction tool, and on previous experience. In addition, design rules are presented, which allow us to achieve for wedge-shaped filters electrical performances comparable to the ones of rectangular waveguide filters, while at the same time improving the multipactor-free power range. As a proof of concept, two three-pole bandpass filters with equivalent electrical characteristic of 150-MHz bandwidth, centered at 12 GHz (Ku band), and the same Q factor have been designed, manufactured, and tested. The first design is based on conventional rectangular waveguide technology, while the second one has non-parallel broadside walls (wedge-shaped cross section). The multipactor power threshold and RF performance of the filters have been measured in order to validate the improvements achievable employing wedge-shaped resonators., This work was supported by the Ministerio de Ciencia e Innovacion, Spain, under Research Project TEC2010-21520-C04-01/TCM.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low Loss Tunable Filters in Substrate Integrated Waveguide

  • Sirci, Stefano
  • Martínez Pérez, Jorge Daniel|||0000-0002-7119-3714
  • Taroncher Calduch, Mariam|||0000-0001-9068-1169
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] In this work, the design and experimental results of compact low-loss filters, based on the extension of the classical coaxial waveguide resonator to Substrate Integrated Waveguide technology, are successfully demonstrated. The design, fabrication and measurement of a continuously tunable cavity resonator and a two-pole filter at S-band in single-layer SIW technology are presented. These structures keep the low-cost fabrication scheme of single-layer PCB processing, while requiring less than half the area compared to a conventional SIW design., The authors would like to thank Generalitat Valenciana and MICINN (Spanish Government) for its financial support under projects GV/2009/007 and TEC2010-21520-C04-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Novel empty substrate integrated waveguide for high performance microwave integrated circuits

  • Belenguer Martínez, Ángel
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
Abstract Over the last years, a great number of substrate integrated circuits has been developed. These new circuits are a compromise between the advantages of classical waveguide technologies, such as high quality factor and low losses, and the advantages of planar circuits, such as low cost and easy compact integration. Although their quality factor and losses are better than for planar circuits, these characteristics are worse than in the case of waveguides, mainly due to the presence of the dielectric substrate. In order to improve the performance of the integrated circuits, a new methodology for manufacturing empty waveguides, without a dielectric substrate, but at the same time completely integrated in a planar substrate, is proposed in this work. A wideband transition with return losses greater than 20 dB in the whole bandwith of the waveguide allows the integration of the empty waveguide into the planar substrate so that the waveguide can be directly accessed with a microstrip line. Therefore, a microwave circuit integrated in a planar substrate, but at the same time with a very high quality factor (measured quality factor is 4.5 times higher than for the same filter in the substrate integrated waveguide), and very low losses is successfully achieved., This work was supported by the Ministerio de Ciencia e Innovacion, Spanish Goverment, under Research Project TEC2010-21520-C04-03 and Research Project EC2010-21520-C04-01, and by the Autonomous Government of Castilla-La Mancha under Research Project PPII10-0047-0220.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rigorous evaluation of propagation losses in arbitrarily shaped waveguide structures using boundary integral resonant mode expansion and perturbation of boundary conditions

  • Marini, Stephan
  • Mattes, Michael
  • Gimeno Martinez, Benito
  • Bleda Pérez, Sergio
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Vidal Pantaleoni, Ana|||0000-0002-3853-6260
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
The accurate consideration of propagation losses in arbitrarily shaped waveguide-based structures is studied in this paper. For such a purpose, a software tool based on the perturbation of the boundary conditions on the waveguide metallic walls and on the boundary integral resonant mode expansion method has been developed. To show the advantages of the proposed technique with respect to the classic power-loss method, the complex propagation wavenumbers of a double ridge and an elliptical waveguide have been first computed and compared with results of a commercial software based on the finite element technique. Next a circular, a sectorial shaped and a triangular shaped waveguide have been considered. Then, a computer-aided design software package based on this modal analysis tool has been applied to predict the propagation loss effects in complex waveguide structures, such as an evanescent mode ridge waveguide filter, a traditional dual mode filter with circular cavities and a twist component for K-band applications., This work has been supported by the Ministerio de Economia y Competitividad (MINECO), Spanish Government, by the coordinated R&D project TEC 2010-21520-C04 and the Grant JC 2009-0221, and by University of Alicante under the project GRE 10-22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of slow-wave structures based on capacitive-loaded lines through aggressive space mapping (ASM)

  • Orellana, M.
  • Selga, J.
  • Sans, M.
  • Rodriguez Perez, Ana Maria
  • Martín Antolín, Juan Fernando
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This article is focused on the automated synthesis of slow-wave structures based on microstrip lines loaded with patch capacitors. Thanks to the presence of the shunt capacitors, the effective capacitance of the line is enhanced, and the phase velocity of the structure can be made significantly smaller than the one of the unloaded line. The target is to achieve the layout of the slow-wave structure able to provide the required slow-wave ratio, characteristic (Bloch) impedance and electrical length (i.e., the usual specifications in the design of slow-wave transmission lines). To this end, a two-step synthesis method, based on the aggressive space mapping (ASM) algorithm, is proposed for the first time. Through the first ASM algorithm, the circuit schematic providing the target specifications is determined. Then, the second ASM optimizer is used to generate the layout of the structure. To illustrate the potential of the proposed synthesis method, three application examples are successfully reported. The two-step ASM algorithm is able to provide the layout of the considered structures from the required specifications, without the need of an external aid in the process., This work has been supported by MINECO-Spain (projects TEC2010-17512 METATRANSFER, TEC2010-21520-C04-01, TEC2013-47037-C5-1-R, CONSOLIDER EMET CSD2008-00066, TEC2013-40600-R and TEC2013-49221-EXP), Generalitat de Catalunya (project 2014SGR-157), Institucio Catalana de Recerca i Estudis Avancats (who has awarded Ferran Martin) and FEDER Funds. Marco Orellana acknowledges the support of the Universidad de Costa Rica, MICITT and CONICIT to study at the Univesitat Autonoma de Barcelona.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

EM Based Synthesis and Design of Bandpass Waveguide Filters Including Manufacturing Effects with FEST3D

  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Carceller Candau, Carlos
  • Vicente Quiles, Carlos Pascual
  • Gil Raga, Jordi
  • Gimeno Martinez, Benito
This article aims at the industry interest on automated design tools that are able to take into account manufacturing effects. First, an efficient design strategy for bandpass waveguide filters including the rounded corners arising from low-cost manufacturing procedures is presented. This technique is based on a recent enhanced prototype and synthesis methodology able to consider the real structure parts. Using the resulting electromagnetic (EM)-based synthesis technique, an excellent structure is extracted, which requires, at most, only a slight final EM optimization. Second, this article presents analytical expressions providing error estimates for the different filter performances in terms of manufacturing tolerances. From such expressions, designers can determine the tolerance to be requested for a tuning-less implementation. Moreover, they can also be used to set the convergence criterion for the synthesis procedure. A fully automated design tool of bandpass waveguide filters able to consider manufacturing impairments has been developed and integrated in the commercial software Full-wave EM Simulation Tool 3D (FEST 3D), The authors thank Mrs. Eva Tarin, Mr. Oscar Monerris, and Mr. Jaime Armendariz for their work on the integration of the synthesis tool for H-plane waveguide filters in FEST 3D. This work was supported by Ministerio de Educacion y Ciencia, Spanish Government, under the Research Project ref. TEC2010-21520-C04-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Full-Wave Analysis of Periodic Dielectric Frequency-Selective Surfaces Under Plane Wave Excitation

  • Coves Soler, Angela
  • Marini, Stephan
  • Gimeno Martinez, Benito
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
A novel full-wave method for the modal characterization of dielectric electromagnetic band-gap structures under oblique plane wave excitation is presented, showing the dielectric lattice periodicity in both the longitudinal and the transverse propagation directions. In this method, an eigenvalue problem is obtained in terms of the generalized ABCD matrix of the periodic cell, whose solution provides not only the propagation constant of the fundamental Floquet mode, but also of the higher order modes of the global periodic structure. The proposed analysis technique has been successfully validated with a commercial software based on the frequency domain finite elementmethod. The transmittance of a finite periodic material with a finite number of unit cells has also been successfully verified through comparisons with other theoretical results reported in the technical literature. Then, our new algorithm has been used to study band-gap materials made of rectangular dielectric parallel rods, investigating the variation of the dispersion diagram and the transmission and reflection transfer functions when modifying both geometrical and electrical parameters of this structure. Finally, the response differences when a periodical defect is considered in a finite periodic arrangement have also been highlighted., This work was supported in part by the Ministerio de Ciencia e Innovacion under Grant TEC2010-21520-C04, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design of planar wideband bandpass filters from specifications using a two-step aggressive space mapping (ASM) optimization algorithm

  • Sans, Marc
  • Selga, Jordi
  • Rodríguez Pérez, Ana María
  • Bonache, Jordi
  • Martín, Ferran
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This paper is focused on the automated and unattended optimization of a type of planar wideband bandpass filters by means of aggressive space mapping (ASM). The considered filters are microstrip filters implemented through a combination of shunt connected stepped impedance resonators (SIRs) and grounded stubs coupled through admittance inverters. The most relevant and novel aspect of this paper is the fact that the filter layout is automatically generated from filter specifications, i.e., central frequency, fractional bandwidth, in-band ripple and order, without the need of any external aid to the design process. To achieve this layout generation, filter optimization has been divided into two independent ASM processes. The first one generates the filter schematic (circuit element values) providing the required specifications. This first iterative process is necessary since, due to the narrow band operation of the admittance inverters, the target specifications are achieved by compensating the effects of such narrow band operation. The purpose of the second ASM algorithm is to automatically generate the layout from the filter schematic resulting from the first ASM process. To validate the new two-step ASM optimization tool, two sets of filter specifications (inputs of the developed tool), are considered. The generated filter layouts exhibit frequency responses that satisfy the specifications, and are in excellent agreement with the responses of the schematics., This work was supported by MINECO-Spain (projects TEC2010-17512 METATRANSFER, TEC2010-21520-C04-01 and TEC2013-47037-C5-1-R, CONSOLIDER EMET CSD2008-00066, TEC2013-40600-R and TEC2013-49221-EXP), Generalitat de Catalunya (project 2014SGR-157), and Institucio Catalana de Recerca i Estudis Avancats (who has awarded F. Martin). This paper was presented in part at the IEEE MTT-S International Microwave Symposium, Tampa Bay, FL, USA, June 1-6, 2014.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Broadband Equivalent Circuit Model for a Coplanar Waveguide Line Loaded with Split Ring Resonators

  • Sanz, Victor
  • Belenguer Martínez, Ángel
  • Lucas Borja, Alejandro
  • Cascón López, Joaquín
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
A new equivalent circuit for a coplanar waveguide loaded with split ring resonators is presented. The traditional circuits that model these devices are only able to characterize the left-handed propagation band, and their response is very similar to the real one within a very limited bandwidth. In contrast, this proposed broadband equivalent circuit is able to portray not only the left-handed propagation band, but also the right-handed one that occurs at higher frequencies. Besides, the response of this kind of basic cells can be adjusted with the proposed circuit model in a bandwidth close to a decade., This work was supported by the Ministerio de Ciencia e Innovacion, Spanish Goverment, under Research Projects TEC2010-21520-C04-03 and -01, and by the Autonomous Government of Castilla-La Mancha under Research Projects PPII10-0047-0220 and PPII10-0027-1277.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Balanced Dual Composite Right/Left-Handed Microstrip Line With Modified Complementary Split-Ring Resonators

  • Belenguer Martínez, Ángel
  • Lucas Borja, Alejandro
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This letter presents a dual composite right/left-handed microstrip line loaded with modified complementary split-ring resonators. In this particular case, the well-known resonant particle employed has been capacitively loaded in order to obtain a balanced frequency response. The inclusion of this capacitive element has two main effects. On the one hand, the right-and left-handed bands are interchanged; on the other hand, the possibility to control the position of the right-handed band, while maintaining the left-handed one unaltered. Consequently, it is relatively simple to design balanced transmission lines with improved bandwidth and reconfigurable properties. In addition, the equivalent circuit that describes the electromagnetic behavior of the structure has been obtained. Finally, a prototype has been fabricated and measured to confirm experimentally the validity of the proposed design., This work was supported by the Ministerio de Ciencia e Innovacion, Spanish Goverment, under Research ProjectsTEC2010-21520-C04-03 and -01 and the Autonomous Government of Castilla-La Mancha under Research Projects PPII10-0047-0220 and PPII10-0027-1277.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multipactor in a Coaxial Line Under the Presence of an Axial DC Magnetic Field

  • Gonzalez Iglesias, Daniel
  • Pérez Pastor, Antonio María
  • Anza Hormigo, Sergio
  • Gimeno Martinez, Benito
  • Raboso García-Baquero, David
  • Vicente Quiles, Carlos Pascual
  • Gil Raga, Jordi
  • Caspers, F.
  • Conde, Luis
  • Vague Cardona, José Joaquín|||0000-0001-5935-3116
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
The main goal of this letter is the analysis of the multipactor effect within a coaxial waveguide structure when an external axial dc magnetic field is applied. We have designed and manufactured a coaxial waveguide sample that has been immersed within a long solenoid. Numerical and experimental results confirm a significant change in the RF breakdown behavior with regard to the case without the axial dc magnetic field, as well as the existence of single- and double-surface multipactor regimes. Good agreement between theory and experimental data has been found., Manuscript received January 23, 2012; accepted January 31, 2012. Date of publication March 16, 2012; date of current version April 20, 2012. This work was supported in part by the Spanish Government through R&D project TEC2010-21520-C04-01. The review of this letter was arranged by Editor E. A. Gutierrez-D.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient boundary integral-resonant mode expansion method implementation for full-wave analysis of passive devices based on circular waveguides with arbitrary perturbations

  • Carceller Candau, Carlos
  • Gil Raga, Jordi
  • Vicente Quiles, Carlos Pascual
  • Gimeno Martinez, Benito
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
In this study, the efficient full-wave analysis of passive devices composed of circular and arbitrarily-shaped waveguides is considered. For this purpose, the well-known boundary integral-resonant mode expansion (BI RME) method has been properly extended. Circular waveguides are used for resonant mode expansion, whereas the arbitrary contour is defined by any combination of straight, circular and elliptical segments, thus allowing the exact representation of the most widely used geometries. The proposed algorithm extends previous implementations of the BI RME method based on circular waveguides by considering circular and elliptical arcs for defining arbitrary geometries. Similarly, it allows the efficient analysis of passive devices based on circular waveguides with arbitrary perturbations, thus providing more accurate results with less computational efforts than a rectangular waveguide-based BI RME approach. The extended method has been successfully tested with several practical application examples, having compared its performance with the BI RME method based on rectangular waveguides., This work was supported by Ministerio de Ciencia e Innovacion, Spanish Government, under Research Project TEC2010-21520-C04-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A controllable bandwidth filter using varactor-loaded metamaterial-inspired transmission lines

  • Lucas Borja, Alejandro
  • Carbonell Olivares, Jorge
  • Lippens, Didier
  • Martínez Pérez, Jorge Daniel|||0000-0002-7119-3714
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This letter presents a tunable bandwidth bandpass filter based on varactor-loaded metamaterial coplanar waveguide (CPW) lines. The CPW lines are based on series gaps and split-ring resonators. The varactors are reverse-biased semiconductor diodes connected between both sides of each series gap. This configuration, directly inspired from the so-called metamaterial technology, takes advantage of the high dispersion of the loaded transmission line. Therefore, strong permittivity and permeability responses induced by means of the resonators are obtained. A single varactor-loaded transmission line is first analyzed. Then, a third-order tunable filter with fractional bandwidth tuning range from 5.8% to 21.5% is experimentally assessed. The proposed filters can be used in several practical applications such as multichannel wireless and satellite communication systems, where reconfigurable devices are often required., This work was supported in part by the Centre National d'Etudes Spatiales (CNES), the Ministerio de Ciencia e Innovacion, Spanish Government under Research Project TEC2010-21520-C04, and the Autonomous Government of Castilla-La Mancha under Research Projects PPII10-0027-1277 and TC20112325.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Compact CPW-fed combline filter in substrate integrated waveguide technology

  • Martínez Pérez, Jorge Daniel|||0000-0002-7119-3714
  • Taroncher Calduch, Mariam|||0000-0001-9068-1169
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Sirci, Stefano
In this letter, the design and experimental results of compact low loss combline filters, based on the extension of the classical coaxial waveguide resonator to Substrate Integrated Waveguide (SIW) technology, are succesfully demonstrated. A three-pole 5% FBW Chebyshev filter has been designed, fabricated and measured. The fabricated device shows an excellent agreement with simulated results. These structures keep the low-cost fabrication scheme of single-layer PCB processing, while requiring less than half the area compared to a conventional SIW design., Manuscript received September 07, 2011; accepted October 20, 2011. Date of publication December 16, 2011; date of current version January 11, 2012. This work was supported by Generalitat Valenciana and MICINN (Spanish Government) under projects GV/2009/007 and TEC2010-21520-C04-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A 3D Smith Chart based on the Riemann Sphere for Active and Passive Microwave Circuits

  • Muller, Andrei A.
  • Dascalu, Dan
  • Neculoiu, Dan
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This letter proposes a spherical 3-D Smith Chart suitable for representing both active and passive microwave circuits. Using the mathematical concept of the Riemann sphere, the extended reflection coefficient plane is transformed into the surface of the unit sphere. Since the proposed Smith Chart compiles the whole complex plane, all possible loads are included. A simple graphic tool is thus obtained that successfully unifies active and passive circuits. In addition, lossy lines with complex characteristic impedances can also be represented. The letter presents the 3-D Smith Chart, provides its main governing equations, and also enumerates its more important properties. © 2011 IEEE., This work was supported in part by the POSDRU ID 7713 European Project and by the Ministerio de Ciencia e Innovacion, Spanish Government under Research Project TEC2010-21520-C04-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improved computation of propagation losses in waveguide structures using perturbation of boundary conditions

  • Marini, Stephan
  • Mattes, Michael
  • Gimeno Martinez, Benito
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
In this letter, a method for the improved consideration of propagation losses in metallic waveguide structures is presented. The method relies on the perturbation of the boundary conditions on the metallic walls of the waveguides. Following this advanced technique, we are able to compute a complex modal propagation constant, thus avoiding the drawbacks of the classical power-loss method where losses associated to evanescent modes were not taken into account. A Computer Aided Design (CAD) software package based on such a modal analysis tool has been applied to predict the propagation loss effects in a Ka-Band rectangular waveguide filter. © 2011 IEEE., This work was supported by the Ministerio de Educacion y Ciencia, Spanish Government, under Grant JC2009-0221, the coordinated R&D project TEC2010-21520-C04, and by the University of Alicante under the project GRE10-22.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Synthesis of split rings based artificial transmission lines through a new two-step, fast converging, and robust aggressive space mapping (ASM) algorithm

  • Selga Ruiz, Jordi|||0000-0002-1660-500X
  • Rodríguez, Ana
  • Boria, Vicente E.
  • Martín, Ferran|||0000-0002-1494-9167
This paper is focused on the synthesis of artificial transmission lines based on complementary split ring resonators (CSRRs). The considered structures are microstrip lines with CSRRs etched in the ground plane and microstrip lines loaded with both CSRRs and series capacitive gaps. An aggressive space mapping (ASM) optimization algorithm, able to automatically generate the layout of these artificial lines, has been developed. The tool has been optimized in order to achieve fast convergence and to provide accurate results. The main relevant aspects of the proposed algorithm (based on a novel two-step ASM optimization approach) are: 1) the capability to provide the implementable circuit elements of the equivalent circuit model of the considered artificial lines and 2) the ability to converge in a few (unprecedented) iteration steps, due to a new procedure to generate the initial layouts (which are very close to the final ones). First, the software is tested through the synthesis of several CSRR-based microstrip lines, and then some practical application examples of such artificial lines are reported to illustrate the potential of the proposed synthesis tool.