Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

On the sum of the transmission and reflection coefficient on the Smith chart and 3D Smith chart

  • Müller, Andrei
  • Moldoveanu, A.
  • Asavei, V.
  • Favennec, J.F.
  • Sanabria-Codesal, Esther|||0000-0002-4523-1991
The paper presents in premiere a simple mapping property of the sum of the reflection and transmission parameters of reciprocal two port networks. It is proved that although the reflection and transmission parameter may have very complicated paths on the Smith chart, their sum will be always moving on the unit circle if the circuit is symmetric and lossless. Further once symmetrical losses at the ports occur their sum path will switch on a family of circles through one point. Using inversive geometry we construct a new function which maps this family of circles in lines on the extended Smith chart. The proposed method for checking the symmetry uses just two parameters and avoids testing the phase of the corresponding input and output parameters. By means of the 3D Smith chart we propose in the end an alternative approach to visualize the parameters., This work has been founded by SIWTUNE Marie Curie CIG no 322162, POSDRU/159/1.5/S/134398 and DGCYT MTM2012-33073 grants.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Two Compact Smith Charts: The 3D Smith Chart and a Hyperbolic Disc Model of the Generalized Infinite Smith Chart

  • Müller, Andrei
  • Moldoveanu, Alin
  • Asavei, Victor
  • Dascalu, Dan
  • Sanabria-Codesal, Esther|||0000-0002-4523-1991
[EN] The paper is describing and presenting the recent advances in the 3D Smith chart representations and applications and then it proposes a new conceptual model for the extended 2D Smith chart based on hyperbolic geometry by mapping the generalized Smith chart in the unit disc using the stereographic projection from a hyperboloid (Poincare disc model)., The work of A. A. Muller was funded by the SIW-TUNE Marie Curie Integration Grant 322162 and the work of E. Sanabria-Codesal is partially supported by DGCYT grant number MTM2015-64013-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Properties of purely reactive Foster and non-Foster passive networks

  • Müller, Andrei
  • Lucyszyn, S.
[EN] The mathematical concept of strongly real functions of positive and negative types is introduced to network theory for the first time. The driving-point reactance/susceptance of a pure Foster network, made up of only ideal positive inductance and capacitance elements, is a strongly real function of real frequency of positive type. As a corollary, for a pure non-Foster network made up of only ideal negative inductance and capacitance elements, the driving-point reactance/susceptance is a strongly real function of real frequency of negative type. It is shown that a condition for a purely reactive passive network to exhibit a positive or negative reactance/susceptance-frequency gradient is that the driving-point immittance should have alternating poles and zeroes lying on the real frequency axis. Finally, it is shown that either purely Foster or non-Foster networks can be constructed by combining ideal Foster and non-Foster reactive elements., This work was partly funded by the FP7 PCIG11-2012-322162 Marie Curie CIG grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Hyperbolic Compact Generalized Smith Chart

  • Müller, Andrei
  • Sanabria-Codesal, Esther|||0000-0002-4523-1991
[EN] The Smith chart was introduced by Philip Hagar Smith in 1939 and then refined and extended several years before becoming an icon of microwave engineering. To have a finite and practical size, the classical 2D Smith Chart is constrained to the unit circle. Hence, loads with reflection coefficient magnitude greater than one cannot be plotted. In 2011, the 3D Smith chart was published by A.A. Muller, P. Soto, D. Dascalu, D. Neculoiu and V. E. Boria. The 3D Smith chart unifies the design of active and passive circuits with any magnitude of the voltage reflection coefficient on the sphere by keeping all the circle forms of the classical Smith chart unchanged, but its handling requires a spherical surface and thus a CAD tool (www.3dsmithchart.com) was developed in order to utilize it., The authors wish to thank to the Marie Curie CIG grant Siwtune 322162 for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Coupling matrix filter synthesis based on reflection matrices

  • Müller, Andrei
  • Favennec, J.F.
  • Sanabria-Codesal, Esther|||0000-0002-4523-1991
The paper introduces the concept of reflection matrices in the coupling matrix filter reconfiguration. It is shown that reflection matrices are complementary to rotation matrices a useful concept that can be used alternatively to rotation matrices in the similarity transformations that are applied in order to transform the coupling matrix to a suitable form. A cross-coupled filter example is given where both concepts are used., This work has been founded by SIWTUNE Marie Curie CIG no 322162 and DGCYT MTM2012-33073 grants.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Apollonius unilateral transducer constant power gain circles on 3D Smith charts

  • Muller, A. A.
  • Moldoveanu, A.
  • Asavei, V.
  • Lucyszyn, S.
  • Sanabria-Codesal, Esther|||0000-0002-4523-1991
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] Unilateral transducer constant power gain circles play an essential role in the design of radio-frequency amplifiers and active modulators, as they help to determine optimal impedance matching conditions to meet gain and stability specifications. It is shown that these gain circles are a subfamily of Apollonius circles. For better visualisation, unilateral transducer constant gain power circles have been plotted for the first time on the three-dimensional (3D) Smith chart. To this end, a natural relationship from an inversive geometry was required, in order to relate the gain circles with cutting planes for the 3D Smith chart., This work has been partly funded by the FP7 PCIG11-2012-322162 Marie Curie CIG, POSDRU/159/1.5/S/134398 and by DGCYT grant MTM2012-33073.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Flexible and Efficient Computer-Aided Design (CAD) Tool for Advanced Comb-Line Rectangular Waveguide Filters

  • San Blas Oltra, Ángel Antonio
  • Müller, Andrei
  • Mira Pérez, Fermín Elías
  • Pérez Soler, Francisco Javier
  • Gimeno Martinez, Benito
  • Vidal Pantaleoni, Ana|||0000-0002-3853-6260
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] A very flexible and efficient computer-aided design (CAD) tool, specifically suited for advanced comb-line rectangular waveguide filters, is presented in this work. The developed software tool, which makes use of a full-wave analysis technique based on the Boundary Integral-Resonant Mode Expansion method, allows loading the considered comb-line resonators with any number of radially symmetrical partial-height metallic posts. The implemented CAD tool also allows dealing with coupling windows of arbitrary cross-section, thus drastically enhancing the flexibility of the CAD process. The excitation of the analyzed components, which is performed using generalized coaxial probes, has also been integrated in the implemented software tool, thus achieving a full-wave electromagnetic characterization of the whole component. Furthermore, a novel simple procedure to efficiently connect all the obtained wide-band matrices is proposed. To validate the accuracy and efficiency of this novel CAD tool, several new designs concerning advanced band-pass comb-line waveguide filters are presented. The accuracy of the developed CAD tool has been successfully validated by comparing the obtained results with numerical data provided by a commercial tool based on the finite-element method. (C) 2015 Wiley Periodicals, Inc., This work has been supported by the Ministerio de Economia y Competitividad, Spanish Government, under the Research Projects TEC2013-47037-C5-1-R and TEC2013-47037-C5-4-R, as well as by the FP7 PCIG11-2012-322162 Marie Curie CIG grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Extended Capabilities of the 3-D Smith Chart With Group Delay and Resonator Quality Factor

  • Müller, Andrei
  • Moldoveanu, Alin
  • Asavei, Victor
  • Lucyszyn, Stepan
  • Sanabria-Codesal, Esther|||0000-0002-4523-1991
[EN] This paper extends the capabilities of the 3-D Smith chart for representing positive and negative differential-phase group delay and the associated loaded resonator quality factor, displayed simultaneously with scattering (S)-parameters. Here, mathematical concepts, inspired from elementary differential geometry and topology, are used to implement 3-D projections. It is shown that a condition for a circuit to exploit negative differential-phase group delay is that its S-parameter winding number should be ¿ 0 (relative to its origin). Finally, exemplar network responses that exhibit both positive and negative differential-phase group delay and loaded resonator quality factor are shown with the 3-D Smith chart. The convenience of being able to simultaneously display a wider range of parameters on one visualization platform, with the 3-D Smith chart, may help to speed-up the design and analysis of microwave circuits by the user., The work of A. A. Muller was supported under SIWTUNE Marie Curie Integration Grant 322162. The work of E. Sanabria-Codesal was supported in part under DGCYT Grant MTM2015-64013-P.