Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

TECNALIA Publications
Publicación Artículo científico (JournalArticle)

Changes of solar cell parameters during damp-heat exposure

  • Zhu, Jiang
  • Koehl, Michael
  • Hoffmann, Stephan
  • Berger, Karl Anton
  • Zamini, Shokufeh
  • Bennett, Ian
  • Gerritsen, Eric
  • Malbranche, Philippe
  • Pugliatti, Paola
  • Di Stefano, Agnese
  • Aleo, Francesco
  • Bertani, Dario
  • Paletta, Fabrizio
  • Roca, Francesco
  • Graditi, Giorgio
  • Pellegrino, Michele
  • Zubillaga, Oihana
  • Cano, F.J.
  • Pozza, Alberto
  • Sample, Tony
  • Gottschalg, Ralph
  • Iranzo, F. J.Cano
The electrical ageing of photovoltaic modules during extended damp-heat tests at different stress levels is investigated for three types of crystalline silicon photovoltaic modules with different backsheets, encapsulants and cell types. Deploying different stress levels allows determination of an equivalent stress dose function, which is a first step towards a lifetime prediction of devices. The derived humidity dose is used to characterise the degradation of power as well as that of the solar cell's equivalent circuit parameters calculated from measured current–voltage characteristics. An application of this to the samples demonstrates different modes in the degradation and thus enables better understanding of the module's underlying ageing mechanisms. The analysis of changes in the solar cell equivalent circuit parameters identified the primary contributors to the power degradation and distinguished the potential ageing mechanism for each types of module investigated in this paper. © 2016 The Authors. Progress in Photovoltaics: Research and Applications published by John Wiley & Sons Ltd. © 2016 The Authors. Progress in Photovoltaics: Research and Applications published by John Wiley & Sons Ltd.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Thermal analysis of a BIPV system by various modelling approaches

  • Assoa, Ya Brigitte
  • Mongibello, Luigi
  • Carr, Anna
  • Kubicek, Bernhard
  • Machado, Maider
  • Merten, Jens
  • Misara, Siwanand
  • Roca, Francesco
  • Sprenger, Wendelin
  • Wagner, Martin
  • Zamini, Shokufeh
  • Baenas, Tomás
  • Malbranche, Philippe
This work presents various models developed and implemented within the SOPHIA European project in order to thermally characterize PV modules in a rooftop BIPV configuration. Different approaches have been considered, including a linear model, lumped elements models and models that make use of commercial software solvers. The validation of the models performed by comparing the results of simulations with experimental data recorded on a test bench over an entire year is presented and discussed on a seasonal basis. The results have shown that all the models implemented allow achieving a good prediction of the PV modules back surface temperature, with the minimum value of the coefficient of determination R2 around 95% on a yearly basis. Moreover, the influence of season weather conditions and of the incident solar irradiance magnitude on the accuracy of the considered thermal models is highlighted. The major result of the present study is represented by the fact that it has been possible to perform a better thermal characterization of the BIPV module by tuning some of the heat transfer coefficients, such as those relative to the effects of the wind velocity, and to the evaluation of sky temperature.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Flexible ITO-free organic solar cells applying aqueous solution-processed V2O5 hole transport layer: An outdoor stability study

  • Lima, Francisco Anderson S.
  • Vasconcelos, Igor F.
  • Gevorgyan, Suren A.
  • Krebs, Frederik C.
  • Lira-Cantú, Mónica
et al., Solution processable semiconductor oxides have opened a new paradigm for the enhancement of the lifetime of thin film solar cells. Their fabrication by low-cost and environmentally friendly solution-processable methods makes them ideal barrier (hole and electron) transport layers. In this work, we fabricate flexible ITO-free organic solar cells (OPV) by printing methods applying an aqueous solution-processed VO as the hole transport layer (HTL) and compared them to devices applying PEDOT:PSS. The transparent conducting electrode was PET/Ag/PEDOT/ZnO, and the OPV configuration was PET/Ag/PEDOT/ZnO/P3HT:PCBM/HTL/Ag. Outdoor stability analyses carried out for more than 900 h revealed higher stability for devices fabricated with the aqueous solution-processed VO., ICN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant Nos. SEV-2013-0295 and ENE2013-48816-C5-4-R. Thanks goes to the Agència de Gestió d’Ajuts Universitaris i de Recerca for the support through the Xarxa de Referència en Materials Avançats per a l’Energia (XaRMAE) and the consolidated research group No. 2014SGR-1212. To the COST Action StableNextSol Project No. MP1307. To CNPq and FUNCAP (Brazil) for the financial support to A.L., A.B., and I.V. Thanks goes to the European Research Infrastructure (SOPHIA) (Grant No. 262533) for providing access to manufacturing equipment at DTU., Peer Reviewed
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Determination of spectral variations by means of component cells useful for CPV rating and design

  • Núñez Júdez, Rubén|||0000-0001-9160-5416
  • Domínguez Domínguez, César|||0000-0002-2751-7208
  • Askins, Stephen Alex|||0000-0002-9988-2917
  • Victoria Pérez, Marta
  • Herrero Martín, Rebeca|||0000-0003-4309-6084
  • Antón Hernández, Ignacio|||0000-0002-6890-5477
  • Sala Pano, Gabriel|||0000-0002-7016-3564
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

SOPHIA CPV module round robin: power rating at CSOC

  • Siefer, Gerald
  • Steiner, Marc
  • Baudrit, Mathieu
  • Domínguez Domínguez, César|||0000-0002-2751-7208
  • Antón Hernández, Ignacio|||0000-0002-6890-5477
  • Núñez Júdez, Rubén|||0000-0001-9160-5416
  • Roca, Franco
  • Pugliatti, Paola Maria
  • Di Stefano, Agnese
  • Kenny, Robert
  • Morabito, Paolo
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Spectral network based on component cells under the SOPHIA European project

  • Núñez Júdez, Rubén|||0000-0001-9160-5416
  • Antón Hernández, Ignacio|||0000-0002-6890-5477
  • Askins, Stephen Alex|||0000-0002-9988-2917
  • Sala Pano, Gabriel|||0000-0002-7016-3564
  • Domínguez Domínguez, César|||0000-0002-2751-7208
  • Voarino, Philippe
  • Steiner, Marc
  • Siefer, Gerald
  • Fucci, Rafaelle
  • Roca, Franco
  • Minuto, Alessandro
  • Morabito, Paolo
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

The e-learning platform of the FP7-SOPHIA Project: obtanied results and perspective for its future exploitation

  • Roca, Francesco
  • Casaburi, David
  • Beone, Francesco
  • Cipoletta, Giuseppe
  • Mencuccini, Giorgio
  • Pavia, Luigi
  • Vita, Anna
  • Augarten, Yael
  • Assoa, Ya Brigitte
  • Antón Hernández, Ignacio|||0000-0002-6890-5477
  • Lauermann, Iver
  • Bergeron, Fabien
  • Gevorgyan, Suren
  • Hüpkes, Jürgen
  • Schuhert, Martin
  • Siefer, Gerald
  • Taylor, Niger
  • Theologitis, Ioannis-Thomas
  • Malbranche, Philippe
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Rating of CPV Modules: Results of Module Round Robins

  • Steiner, M.
  • Siefer, Gerald
  • Baudrit, Mathieu
  • Askins, Stephen Alex|||0000-0002-9988-2917
  • Domínguez Domínguez, César|||0000-0002-2751-7208
  • Antón Hernández, Ignacio|||0000-0002-6890-5477
  • Roca, F.
  • Fucci, Rafaelle
  • Cancro, C.
  • Romano, A.
  • Graditti, G.
  • Pugliatti, Paola Maria
  • Di Stefano, A.
  • Kenny, R.
  • Norton, M.
  • Minuto, A.
  • Morabito, A.
  • Muller, M.
  • Riley, D.
  • Pratt, L.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Flexible ITO-free organic solar cells applying aqueous solution-processed V2O5 hole transport layer, An outdoor stability study

  • Lima, F. Anderson S.
  • Beliatis, Michail J.|||0000-0002-7902-6144
  • Roth, Bérenger
  • Andersen, Thomas R.|||0000-0003-0180-1443
  • Bortoti, Andressa
  • Reyna, Yegraf
  • Castro, Eryza
  • Vasconcelos, Igor F.|||0000-0002-6172-805X
  • Gevorgyan, Suren A.|||0000-0001-9906-5485
  • Krebs, Frederik C.|||0000-0003-1148-4314
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Solution processable semiconductor oxides have opened a new paradigm for the enhancement of the lifetime of thin film solar cells. Their fabrication by low-cost and environmentally friendly solution-processable methods makes them ideal barrier (hole and electron) transport layers. In this work, we fabricate flexible ITO-free organic solar cells (OPV) by printing methods applying an aqueous solution-processed V2O5 as the hole transport layer (HTL) and compared them to devices applying PEDOT:PSS. The transparent conducting electrode was PET/Ag/PEDOT/ZnO, and the OPV configurationwas PET/Ag/PEDOT/ZnO/P3HT:PC60BM/HTL/Ag. Outdoor stability analyses carried out for more than 900 h revealed higher stability for devices fabricated with the aqueous solution-processed V2O5.