Pasar al contenido principal

CELULAS SOLARES NANOESTRUCTURADAS FABRICADAS A PARTIR DE DISOLUCIONES: NUEVOS NANOMATERIALES BASADOS EN OXIDOS DE METALES DE TRANSICION Y GRAFENO

ENE2013-48816-C5-4-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced photovoltaic performance of inverted hybrid bulk-heterojunction solar cells using TiO2/reduced graphene oxide films as electron transport layers

  • Morais, Andreia
  • Alves, João Paulo C.
  • Lima, Francisco Anderson S.
  • Lira-Cantú, Mónica
  • Nogueira, Ana Flavia
In this study, we investigated inverted hybrid bulk-heterojunction solar cells with the following configuration: fluorine-doped tin oxide (FTO) |TiO2/RGO|P3HT:PC61BM|V2O5 or PEDOT:PSS|Ag. The TiO2/GO dispersions were prepared by sol-gel method, employing titanium isopropoxide and graphene oxide (GO) as starting materials. The GO concentration was varied from 0.1 to 4.0 wt%. The corresponding dispersions were spin-coated onto FTO substrates and a thermal treatment was performed to remove organic materials and to reduce GO to reduced graphene oxide (RGO). The TiO2/RGO films were characterized by x-ray diffraction, Raman spectroscopy, and microscopy techniques. Atomic force microscopy (AFM) images showed that the addition of RGO significantly changes the morphology of the TiO2 films, with loss of uniformity and increase in surface roughness. Independent of the use of V2O5 or PEDOT: PSS films as the hole transport layer, the incorporation of 2.0 wt% of RGO into TiO2 films was the optimal concentration for the best organic photovoltaic performance. The solar cells based on TiO2/RGO (2.0 wt%) electrode exhibited a ∼22.3% and ∼28.9% short circuit current density (Jsc) and a power conversion efficiency enhancement, respectively, if compared with the devices based on pure TiO2 films. Kelvin probe force microscopy images suggest that the incorporation of RGO into TiO2 films can promote the appearance of regions with different charge dissipation capacities., The authors thank LNNano/LNLS for the AFM and KPFM images, and INEO, CNPq (fellowship 246430/2012-5), and FAPESP (fellowship 2010/18656-1) for the financial supports. MINECO for the economic support through the ENE2013-48816-C5-4-R project. The COST Action StableNextSol project MP1307. The Agència de Gestió d’Ajuts Universitaris i de Recerca for the project 2014 SGR 1212. FASL would like to thank to the Secretary of Education of the State of Ceará (SEDUC-CE) for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Above-bandgap photovoltages in antiferroelectrics

  • Pérez-Tomás, Amador
  • Lira-Cantú, Mónica
  • Catalán, Gustau
The first antiferroelectric solar cell is presented. This study shows that antiferroelectric thin-film photovoltaic current can be switched on when biased into the polar phase to generate abovebandgap photovoltages in excess of 100 V and photovoltaic fields of several megavolts per centimeter, the largest ever measured for any material., ICN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295, and the grants ENE2013-48816-C5-4-R and FIS2013-48668-C2-1-P. To the Agència de Gestió d’Ajuts Universitaris i de Recerca for the support to consolidated Catalonia research groups 2014SGR 1212 and 1216-F. To the COST Action StableNextSol project MP1307; and to the European Research Council (ERC) Starting Grant, project No. 308023., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Baselines for lifetime of organic solar cells

  • Gevorgyan, Suren A.
  • Mingorance, Alba
  • Krebs, Frederik C.
et al., The process of accurately gauging lifetime improvements in organic photovoltaics (OPVs) or other similar emerging technologies, such as perovskites solar cells is still a major challenge. The presented work is part of a larger effort of developing a worldwide database of lifetimes that can help establishing reference baselines of stability performance for OPVs and other emerging PV technologies, which can then be utilized for pass-fail testing standards and predicting tools. The study constitutes scanning of literature articles related to stability data of OPVs, reported until mid-2015 and collecting the reported data into a database. A generic lifetime marker is utilized for rating the stability of various reported devices. The collected data is combined with an earlier developed and reported database, which was based on articles reported until mid-2013. The extended database is utilized for establishing the baselines of lifetime for OPVs tested under different conditions. The work also provides the recent progress in stability of unencapsulated OPVs with different architectures, as well as presents the updated diagram of the reported record lifetimes of OPVs. The presented work is another step forward towards the development of pass-fail testing standards and lifetime prediction tools for emerging PV technologies., This work has been supported by the European Commission's StableNextSol COST Action MP1307. The research leading to these results has received funding from the European Union Seventh Framework Programme (FP7/2007-2013) under grant agreement n° 609788 (CHEETAH) and n° 290022 (ESTABLIS). ICN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant Nos. SEV-2013-0295 and ENE2013-48816-C5-4-R. Thanks goes to Agencia de Gestio d'Ajuts Universitaris i de Recerca for the support through the Xarxa de Referencia en Materials Avançats per a l'Energia (XaRMAE) and consolidated research group No. 2014SGR-1212. This work has been carried out under the Materials Science Ph.D. Degree for A.M. of the Universitat Autònoma de Barcelona. R.R. and H.H. are grateful for financial support from BMBF (grant number 03EK3502) and ESF. F.P. received support from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 659747. L.S. and M.R. received supported from the Portuguese Foundation for Science and Technology in the framework of the Strategic Program UID/FIS/04650/2013., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Flexible ITO-free organic solar cells applying aqueous solution-processed V2O5 hole transport layer: An outdoor stability study

  • Lima, Francisco Anderson S.
  • Vasconcelos, Igor F.
  • Gevorgyan, Suren A.
  • Krebs, Frederik C.
  • Lira-Cantú, Mónica
et al., Solution processable semiconductor oxides have opened a new paradigm for the enhancement of the lifetime of thin film solar cells. Their fabrication by low-cost and environmentally friendly solution-processable methods makes them ideal barrier (hole and electron) transport layers. In this work, we fabricate flexible ITO-free organic solar cells (OPV) by printing methods applying an aqueous solution-processed VO as the hole transport layer (HTL) and compared them to devices applying PEDOT:PSS. The transparent conducting electrode was PET/Ag/PEDOT/ZnO, and the OPV configuration was PET/Ag/PEDOT/ZnO/P3HT:PCBM/HTL/Ag. Outdoor stability analyses carried out for more than 900 h revealed higher stability for devices fabricated with the aqueous solution-processed VO., ICN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant Nos. SEV-2013-0295 and ENE2013-48816-C5-4-R. Thanks goes to the Agència de Gestió d’Ajuts Universitaris i de Recerca for the support through the Xarxa de Referència en Materials Avançats per a l’Energia (XaRMAE) and the consolidated research group No. 2014SGR-1212. To the COST Action StableNextSol Project No. MP1307. To CNPq and FUNCAP (Brazil) for the financial support to A.L., A.B., and I.V. Thanks goes to the European Research Infrastructure (SOPHIA) (Grant No. 262533) for providing access to manufacturing equipment at DTU., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Performance and stability of mixed FAPbI3(0.85)MAPbBr3(0.15) halide perovskite solar cells under outdoor conditions and the effect of low light irradiation

  • Reyna, Yegraf
  • Salado, Manuel
  • Kazim, Samrana
  • Pérez-Tomás, Amador
  • Ahmad, Shahzada
  • Lira-Cantú, Mónica
We demonstrate for the first time, the real lifetime response of mixed halide perovskite solar cells (PSCs) for >1000 h under outdoor conditions and the exceptional photoresponse observed at low-light intensities attributed to the ionic-electronic nature of the material. The investigated devices were fabricated by utilizing mixed perovskites containing formamidinium (FA) and methylammonium (MA) cations, in a one step solution-process method through a solvent engineering approach. The devices’ architecture is FTO/TiO (blocking layer) TiO (mesoporous)/FAPbIMAPbBr/Spiro-OMeTAD/Au. Notably, low short circuit current (J) was observed at low light intensities (<50 W/m) together with high open circuit potential build-up, which resulted in high PCEs. This response is in agreement with a “double electronic-ionic transport” model of the halide perovskite where the ionic component dominates at low light intensities and the electronic component dictates at high light irradiances. Our results highlight the exceptional stability of mixed MA/FA mesoscopic PSCs when operated for >1000 h under real outdoor conditions and the strong ionic component observed at low light irradiation., CN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295, for the Grants ENE2013-48816-C5-4-R, ENE2016-79282-C5-2-R and the Nanoselect Excelence Network MAT2015-68994-REDC. To the Agència de Gestió d'Ajuts Universitaris i de Recerca for the support to consolidated Catalonia research group 2014SGR-1212 and the Xarxa de Referència en Materials Avançats per a l'Energia (Xarmae). To the COST Action StableNextSol ProjectMP1307. To CONACYT for the PhD awarded to Y.R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Incorporation of counter ions in organic molecules: new strategy in developing dopant-free hole transport materials for efficient mixed-ion perovskite solar cells

  • Zhang, Jinbao
  • Xu, Bo
  • Mingorance, Alba
  • Lira-Cantú, Mónica
  • Sun, Licheng
  • Johansson, Erik
et al., Hole transport matertial (HTM) as charge selective layer in perovskite solar cells (PSCs) plays an important role in achieving high power conversion efficiency (PCE). It is known that the dopants and additives are necessary in the HTM in order to improve the hole conductivity of the HTM as well as to obtain high efficiency in PSCs, but the additives can potentially induce device instability and poor device reproducibility. In this work a new strategy to design dopant-free HTMs has been presented by modifying the HTM to include charged moieties which are accompanied with counter ions. The device based on this ionic HTM X44 dos not need any additional doping and the device shows an impressive PCE of 16.2%. Detailed characterization suggests that the incorporated counter ions in X44 can significantly affect the hole conductivity and the homogeneity of the formed HTM thin film. The superior photovoltaic performance for X44 is attributed to both efficient hole transport and effective interfacial hole transfer in the solar cell device. This work provides important insights as regards the future design of new and efficient dopant free HTMs for photovotaics or other optoelectronic applications., Financial assistance was provided by the Swedish Energy Agency, ÅForsk, the Swedish Research Council (VR), and Swedish Research Council FORMAS. ICN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295, the CONSOLIDER Excellence Network MAT2015-68994-REDC, and the grant ENE2013-48816-C5-4-R. Thank the Agència de Gestió d’Ajuts Universitaris i de Recerca for the support to consolidated Catalonia research groups 2014SGR 1212. This work was carried out under the Materials Science PhD Degree for A.M. of the Universitat Autònoma de Barcelona. The authors also thank COST Action StableNextSol project MP1307 for the STSM awarded to J.Z., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Charge storage mechanism of MnO2 cathodes in Zn/MnO2 batteries using ionic liquid-based gel polymer electrolytes

  • Tafur, Juan P.
  • Abad, José M.
  • Román García, Elisa Leonor
  • Fernández Romero, Antonio J.
Cathode reactions in Zn/MnO2 batteries using aqueous electrolytes have been usually interpreted by the reduction of Mn4 + to Mn3 + while protons and/or cations penetrate inside the cathode. However, until now, the MnO2 storage charge mechanism using a non-aqueous gel polymer electrolyte (GPE) has not been investigated. In this work, ionic liquid-based GPEs including BMIM Tf and ZnTf2 have been employed in Zn/MnO2 batteries. Different states of charge of MnO2 cathodes used in Zn/IL-GPE/MnO2 batteries have been analyzed by XPS and EDX techniques. XPS analysis showed that Mn4 + is reduced during the discharge process at the same time as Zn2 + cations are incorporated into the cathode. Besides, Zn2 + cations insertion is accompanied by triflate anions., The authors thank the financial support from the Spanish Ministerio de Economía y Competitividad (Ref. ENE2013-48816-C5-3-R).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Above-Bandgap Photovoltages in Antiferroelectrics

  • Perez-Tomas, Amador|||0000-0002-0551-3142
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Catalan, Gustau|||0000-0003-0214-4828
The closed circuit photocurrent and open circuit photovoltage of antiferroelectric thin films were characterized both in their ground (antipolar) state and in their polarized state. A sharp transition happens from near zero to large photovoltages as the polarization is switched on, consistent with the activation of the bulk photovoltaic effect. The AFE layers have been grown by a solution processing method (sol?gel synthesis followed by spin coating deposition) onto fluorine-doped tin oxide (FTO), a transparent conducting oxide with low sheet resistance and a higher resilience to high-temperature processing than indium tin oxide and a standard for solar cells such as organometal trihalide perovskites. Light absorption confirmed that the PZO films are, as expected, wide-band gap semiconductors with a gap of 3.7.8 eV and thus highly absorbing in the near-ultraviolet range. On a virgin sample, there is no shortcircuit photocurrent, consistent with the antipolar nature of the ground state. As an external bias voltage is applied, the current remains negligible until suddenly, at the coercive voltage, a spike is observed, corresponding to the transient displacement current caused by the onset of polarization.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Flexible ITO-free organic solar cells applying aqueous solution-processed V2O5 hole transport layer, An outdoor stability study

  • Lima, F. Anderson S.
  • Beliatis, Michail J.|||0000-0002-7902-6144
  • Roth, Bérenger
  • Andersen, Thomas R.|||0000-0003-0180-1443
  • Bortoti, Andressa
  • Reyna, Yegraf
  • Castro, Eryza
  • Vasconcelos, Igor F.|||0000-0002-6172-805X
  • Gevorgyan, Suren A.|||0000-0001-9906-5485
  • Krebs, Frederik C.|||0000-0003-1148-4314
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Solution processable semiconductor oxides have opened a new paradigm for the enhancement of the lifetime of thin film solar cells. Their fabrication by low-cost and environmentally friendly solution-processable methods makes them ideal barrier (hole and electron) transport layers. In this work, we fabricate flexible ITO-free organic solar cells (OPV) by printing methods applying an aqueous solution-processed V2O5 as the hole transport layer (HTL) and compared them to devices applying PEDOT:PSS. The transparent conducting electrode was PET/Ag/PEDOT/ZnO, and the OPV configurationwas PET/Ag/PEDOT/ZnO/P3HT:PC60BM/HTL/Ag. Outdoor stability analyses carried out for more than 900 h revealed higher stability for devices fabricated with the aqueous solution-processed V2O5.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Baselines for Lifetime of Organic Solar Cells

  • Gevorgyan, Suren A.|||0000-0001-9906-5485
  • Espinosa, Nieves
  • Ciammaruchi, Laura
  • Roth, Bérenger
  • Livi, Francesco
  • Tsopanidis, Stylianos
  • Züfle, Simon
  • Queirós, Sara
  • Gregori, Alberto
  • Benatto, Gisele Alves Dos Reis
  • Corazza, M.
  • Madsen, Morten Vesterager|||0000-0002-6838-9708
  • Hösel, Markus
  • Beliatis, Michail J.|||0000-0002-7902-6144
  • Larsen-Olsen, Thue T.
  • Pastorelli, Francesco
  • Castro, António
  • Mingorance, Alba
  • Lenzi, Veniero|||0000-0002-3633-1966
  • Fluhr, Daniel
  • Roesch, Roland
  • Duarte Ramos, Marta Maria
  • Savva, Achilleas
  • Hoppe, Harald
  • Marques, Luis Silvino Alves
  • Burgués Ceballos, Ignasi
  • Georgiou, Efthymios
  • Serrano Luján, Lucía
  • Krebs, Frederik C.|||0000-0003-1148-4314
The process of accurately gauging lifetime improvements in organic photovoltaics (OPVs) or other similar emerging technologies, such as perovskites solar cells is still a major challenge. The presented work is part of a larger effort of developing a worldwide database of lifetimes that can help establishing reference baselines of stability performance for OPVs and other emerging PV technologies, which can then be utilized for pass-fail testing standards and predicting tools. The study constitutes scanning of literature articles related to stability data of OPVs, reported until mid-2015 and collecting the reported data into a database. A generic lifetime marker is utilized for rating the stability of various reported devices. The collected data is combined with an earlier developed and reported database, which was based on articles reported until mid-2013. The extended database is utilized for establishing the baselines of lifetime for OPVs tested under different conditions. The work also provides the recent progress in stability of unencapsulated OPVs with different architectures, as well as presents the updated diagram of the reported record lifetimes of OPVs. The presented work is another step forward towards the development of pass-fail testing standards and lifetime prediction tools for emerging PV technologies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Incorporation of Counter Ions in Organic Molecules, New Strategy in Developing Dopant-Free Hole Transport Materials for Efficient Mixed-Ion Perovskite Solar Cells

  • Zhang, Jinbao
  • Xu, Bo
  • Yang, Li
  • Mingorance, Alba
  • Ruan, Changqing
  • Hua, Yong
  • Wang, Linqin
  • Vlachopoulos, Nick
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Boschloo, Gerrit|||0000-0002-8249-1469
  • Hagfeldt, Anders|||0000-0001-6725-8856
  • Sun, Licheng
  • Johansson, Erik M. J.
Hole transport matertial (HTM) as charge selective layer in perovskite solar cells (PSCs) plays an important role in achieving high power conversion efficiency (PCE). It is known that the dopants and additives are necessary in the HTM in order to improve the hole conductivity of the HTM as well as to obtain high efficiency in PSCs, but the additives can potentially induce device instability and poor device reproducibility. In this work a new strategy to design dopant-free HTMs has been presented by modifying the HTM to include charged moieties which are accompanied with counter ions. The device based on this ionic HTM X44 dos not need any additional doping and the device shows an impressive PCE of 16.2%. Detailed characterization suggests that the incorporated counter ions in X44 can significantly affect the hole conductivity and the homogeneity of the formed HTM thin film. The superior photovoltaic performance for X44 is attributed to both efficient hole transport and effective interfacial hole transfer in the solar cell device. This work provides important insights as regards the future design of new and efficient dopant free HTMs for photovotaics or other optoelectronic applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Procedures and practices for evaluating thin-film solar cell stability

  • Roesch, Roland
  • Faber, Tobias
  • Von Hauff, Elizabeth
  • Brown, Thomas M.
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Hoppe, Harald
During the last few decades, and in some cases only the last few years, novel thin-film photovoltaic (PV) technologies such as dye-sensitized solar cells (DSSC), organic solar cells (OPV), and, more recently, perovskite-based solar cells (PSC) have been growing in maturity with respect to device performance and device stability. Together with new material systems, novel device architectures have also been introduced. Both parameters will have an effect on the overall device stability. In order to improve the understanding of degradation effects and how they can be prevented, stress testing under different conditions is commonly applied. By careful combination of stress factors and thorough analysis of photovoltaic parameter decaying curves, an understanding of the underlying degradation pathways can be gained. With the help of standardized and accelerated stress tests, as described in the ISOS-protocols, statements concerning application lifetimes can finally be made and compared among different labs. Once a photovoltaic technology has proven long lasting durability, the ultimate barrier for entering the commercial market are the IEC tests, taking a deeper look on overall safety and reliability, not only on durability. Here, the most prominent stress tests are reviewed, discussed and extended with respect to learning the most about photovoltaic device stability. Common procedures and practices for evaluating thin-film solar cell stability and durability are reviewed with respect to their applicability for predicting failure routes and application lifetimes. Suggestions for the reporting of detailed stress factors, photovoltaic parameters with sufficient statistical weight, and new figures of merit are made with the goal of steepening the learning curve towards real applications.