Pasar al contenido principal

NANOMATERIALES PARA CELDAS SOLARES TIPO PEROVSKITA DE ALTA EFICIENCIA Y ESTABILIDAD

ENE2016-79282-C5-2-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 24
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Performance and stability of mixed FAPbI3(0.85)MAPbBr3(0.15) halide perovskite solar cells under outdoor conditions and the effect of low light irradiation

  • Reyna, Yegraf
  • Salado, Manuel
  • Kazim, Samrana
  • Pérez-Tomás, Amador
  • Ahmad, Shahzada
  • Lira-Cantú, Mónica
We demonstrate for the first time, the real lifetime response of mixed halide perovskite solar cells (PSCs) for >1000 h under outdoor conditions and the exceptional photoresponse observed at low-light intensities attributed to the ionic-electronic nature of the material. The investigated devices were fabricated by utilizing mixed perovskites containing formamidinium (FA) and methylammonium (MA) cations, in a one step solution-process method through a solvent engineering approach. The devices’ architecture is FTO/TiO (blocking layer) TiO (mesoporous)/FAPbIMAPbBr/Spiro-OMeTAD/Au. Notably, low short circuit current (J) was observed at low light intensities (<50 W/m) together with high open circuit potential build-up, which resulted in high PCEs. This response is in agreement with a “double electronic-ionic transport” model of the halide perovskite where the ionic component dominates at low light intensities and the electronic component dictates at high light irradiances. Our results highlight the exceptional stability of mixed MA/FA mesoscopic PSCs when operated for >1000 h under real outdoor conditions and the strong ionic component observed at low light irradiation., CN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295, for the Grants ENE2013-48816-C5-4-R, ENE2016-79282-C5-2-R and the Nanoselect Excelence Network MAT2015-68994-REDC. To the Agència de Gestió d'Ajuts Universitaris i de Recerca for the support to consolidated Catalonia research group 2014SGR-1212 and the Xarxa de Referència en Materials Avançats per a l'Energia (Xarmae). To the COST Action StableNextSol ProjectMP1307. To CONACYT for the PhD awarded to Y.R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Metal oxides in photovoltaics: All-oxide, ferroic and perovskite solar cells

  • Pérez-Tomás, Amador
  • Mingorance, Alba
  • Tanenbaum, David M.
  • Lira-Cantú, Mónica
Semiconductor oxides have been applied in photovoltaic technologies for many years. The remarkable versatility of their properties and the feasibility to be fabricated by simple, low-cost and easily scalable fabrication methods confers oxides a unique place in next generation photovoltaics (NGPVs). Their outstanding ability to preserve or improve device characteristics, even as a noncrystalline (amorphous) material, allows their application in flexible and semitransparent PVs devices and printed electronics. Basic (doped and undoped) semiconductor oxides have demonstrated to provide enhanced lifetime stability to state-of-the-art PVs such as Organic (OPV) and halide perovskite solar cells (PSCs), which is a significant step toward NGPVs industrialization and commercialization. But semiconductor oxides, in their more complex form, can also provide properties like magnetism, ferroelectricity, or pyroelectricity (among others), that collectively with the most classical materials, can deliver novel and innovative features. This chapter documents the most recent results observed when semiconductor oxides are applied in different NGPVs technologies. The chapter covers technologies like all-oxide solar cells where the oxide is not only part of the device but also acts as the main light harvesting material. The chapter also describes the application of oxides as part of OPV and PSCs where semiconductor oxides are mostly applied as barrier layers eliminating the use of expensive and unstable organic semiconductors, enhancing device lifetime., A.P.T. acknowledges Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) under contract ENE2015-74275-JIN. To the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295 for the predoctoral contract to A.M; for the grant ENE2013-48816-C5-4-R, ENE2016-79282-C5-2-R and the Nanoselect Excelence Network MAT2015-68994-REDC. To the Agència de Gestiód'Ajuts Universitaris i de Recerca for the support to the consolidated Catalonia research group 2014SGR-1212 and the Xarxa de Referència en Materials Avançats per a l'Energia (Xarmae). To the COST Action StableNextSol project MP1307., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards Oxide Electronics: a Roadmap

  • Coll, Mariona
  • Fontcuberta, Josep
  • Althammer, M.
  • Bibes, Manuel
  • Boschker, H.
  • Calleja Lázaro, Alberto
  • Cheng, G.
  • Cuoco, M.
  • Dittmann, Regina
  • Dkhil, B.
  • El Baggari, I.
  • Fanciulli, M.
  • Fina, Ignasi
  • Fortunato, E.
  • Frontera, Carlos
  • Fujita, S.
  • García, V.
  • Goennenwein, S.T.B.
  • Granqvist, C.-G.
  • Grollier, J.
  • Gross, R.
  • Hagfeldt, A.
  • Herranz, Gervasi
  • Hono, K.
  • Houwman, E.
  • Huijben, M.
  • Kalaboukhov, A.
  • Keeble, D.J.
  • Koster, G.
  • Kourkoutis, L.F.
  • Levy, J.
  • Lira-Cantú, Mónica
  • MacManus-Driscoll, J.L.
  • Mannhart, Jochen
  • Martins, R.
  • Menzel, S.
  • Mikolajick, T.
  • Napari, M.
  • Nguyen, M.D.
  • Niklasson, G.
  • Paillard, C.
  • Panigrahi, S.
  • Rijnders, G.
  • Sánchez Barrera, Florencio
  • Sanchis, P.
  • Sanna, S.
  • Schlom, Darrell G.
  • Schroeder, U.
  • Shen, K.M.
  • Siemon, A.
  • Spreitzer, M.
  • Sukegawa, H.
  • Tamayo, R. R.
  • Brink, J. van den
  • Pryds, N.
  • Miletto Granozio, F.
At the end of a rush lasting over half a century, in which CMOS technology has been experiencing a constant and breathtaking increase of device speed and density, Moore’s law is approaching the insurmountable barrier given by the ultimate atomic nature of matter. A major challenge for 21st century scientists is finding novel strategies, concepts and materials for replacing silicon-based CMOS semiconductor technologies and guaranteeing a continued and steady technological progress in next decades. Among the materials classes candidate to contribute to this momentous challenge, oxide films and heterostructures are a particularly appealing hunting ground. The vastity, intended in pure chemical terms, of this class of compounds, the complexity of their correlated behaviour, and the wealth of functional properties they display, has already made these systems the subject of choice, worldwide, of a strongly networked, dynamic and interdisciplinary research community. Oxide science and technology has been the target of a wide four-year project, named Towards Oxide-Based Electronics (TO-BE), that has been recently running in Europe and has involved as participants several hundred scientists from 29 EU countries. In this review and perspective paper, published as a final deliverable of the TO-BE Action, the opportunities of oxides as future electronic materials for Information and Communication Technologies ICT and Energy are discussed. The paper is organized as a set of contributions, all selected and ordered as individual building blocks of a wider general scheme. After a brief preface by the editors and an introductory contribution, two sections follow. The first is mainly devoted to providing a perspective on the latest theoretical and experimental methods that are employed to investigate oxides and to produce oxide-based films, heterostructures and devices. In the second, all contributions are dedicated to different specific fields of applications of oxide thin films and heterostructures, in sectors as data storage and computing, optics and plasmonics, magnonics, energy conversion and harvesting, and power electronics., The authors acknowledge financial support from the Netherlands Organization for Scientific Research (NWO). We acknowledge fruitful interactions with our many collaborators in the realm of artificial quantum materials, especially the groups of J.C. Séamus Davis, Craig J. Fennie, Eun-Ah Kim, Lena F. Kourkoutis, and David A. Muller. This work was supported by the National Science Foundation (Platform for the Accelerated Realization, Analysis, and Discovery of Interface Materials (PARADIM)) under Cooperative Agreement No. DMR-1539918. Financial support from the Spanish Ministry of Economy and Competitiveness (SEV-2015-0496, MAT2014-56063-C2-1-R, and MAT2017-85232-R), from Generalitat de Catalunya (2014 SGR 734), and from Slovenian Research Agency (P2-0091 and J2-6759) is acknowledged. The authors acknowledge funding from the EPSRC grant EP/ P027032/1. Prof. O. Nilsen is acknowledged for valuable discussions on the current status of ALD perovskites. Author thanks fruitful discussions with Dr. J. Santiso. Financial support from the Spanish Ministry of Economy and Competitiveness through the ''Severo Ochoa" Programme for Centres of Excellence in R&D (SEV-2015-0496), and projects MAT2015-71664-R and MAT2015- 67593-P is acknowledged. This work was supported by PARADIM, a National Science Foundation Materials Innovation Platform (Grant DMR-1539918), and by the Air Force Office of Scientific Research (Award number FA 9550-16-1-0305). Funding from the DFG (German Science Foundation) within the collaborative research center SFB 917 'Nanoswitches' and the W2/ W3 program of the Helmholtz association is gratefully acknowledged. We furthermore acknowledge funding by the ToBE CoST action (MP1308). We acknowledge financial support from the ERC Consolidator grant ‘‘MINT” (contract number n° 615759) and the ANR project ‘‘FERROMON”. This publication has received funding from the European Union’s Horizon 2020 research innovation programme under grant agreement 732642 (ULPEC project). This work is supported by a public grant overseen by the French National Research Agency (ANR) as part of the ‘‘Investissements d’Avenir” program (Labex NanoSaclay, reference: ANR-10-LABX-0035). This work was supported in part by the EFRE fund of the European Commission, by the Free State of Saxony (Germany), and by funding of the Deutsche Forschungsgemeinschaft (DFG project: Inferox). This work was supported in parts by the Deutsche Forschungsge-meinschaft (DFG) under Grant SFB 917 ''Nanoswitches" and the COST Action MP1308 ''TO-BE (Towards Oxide-Based Electronics)". This publication has received funding from the European Union’s Horizon 2020 research innovation programme under grant agree-ment 732642 (ULPEC project). We thank M. Belmoubarik and J. Uzuhashi for their technical assistance for Fig. 36. We acknowledge support from the ImPACT Program of Council for Science, Technology and Innovation, Japan. Gervasi Herranz acknowledges financial support from MAT2014-56063-C2-1-R and Severo Ochoa SEV-2015-0496 Projects, and the Generalitat de Catalunya (2014 SGR 734Project). Pablo Sanchis acknowledges financial support from TEC2016-76849 and FP7-ICT-2013-11-619456 SITOGA. We thank the financial support from the SNSF NRP70 ‘‘Energy Turnaround” and GRAPHENE project supported by the European Commission Seventh Framework Programme under contract 604391 is gratefully acknowledged. To the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295; for the grant ENE2016-79282-C5-2-R and the OrgEnergy Excelence NetworkCTQ2016-81911-REDT. To the Agència de Gestió d’Ajuts Universitaris i de Recerca for the support to the consolidated Catalonia research group 2014SGR-1212 and the Xarxa de Referència en Materials Avançats per a l’Energia (Xarmae). To the CERCA Pro-gramme/Generalitat de Catalunya and to the European COST Action StableNextSol project MP1307. The authors would like to acknowledge the financial support from ACCIO-Generalitat de Catalunya and the European Union for the 3D-PHOTOXIDES ERA-NET MANUNET II and from IV Fondo de Emprendedores of Fundación Repsol for the SOLAR OXIDES project. The authors would also thank Mr. Andrés Gómez from Institut de Ciència de Materials de Barcelona (ICMAB) for the pc-AFM measure-ments and Mr. Alex Hernández from Institut de Recerca en Energia de Catalunya (IREC) for the sputtering and valuable guidance. We would like to acknowledge the financial support granted by the Spanish Government [Projects MAT2014-56063-C2-1-R, MAT2015-73839-JIN, MAT2014-51778-C2-1-R and MAT2014-57960-C3-1-R, and associated FEDER], I.F. acknowledges Ramon y Cajal contract RYC-2017-22531, the Generalitat de Catalunya (2014-SGR-734). ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘‘Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496). C.P. and B.D. acknowledge a public grant overseen by the French National Research Agency (ANR) as part of the ‘‘Investissements d’Avenir” program (Grant No. ANR-10-LABX-0035, Labex NanoSaclay). The authors would like to acknowledge L. Pereira and P. Bar-quinha for fruitful discussions during the manuscript preparation. We acknowledge the funding from Portuguese Foundation for Science and Technology, Reference UID/CTM/50025/2013 and FEDER funds through the COMPETE 2020 Programme under the project number POCI-01-0145-FEDER-007688. Part of this work is partially financed from European Community H2020 program under grant agreements No. 665046 (project Symbiotic) and No. 644631 (project Roll-Out). Several of the recent advances in electrochromic and ther-mochromic materials, reported above, were reached with financial support received from the European Research Council under the European Community’s Seventh Framework Program (FP2007– 2013)/ERC Grant Agreement No. 267234 (‘‘GRINDOOR”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A solar transistor and photoferroelectric memory

  • Pérez-Tomás, Amador
  • Lima, Francisco Anderson S.
  • Billon, Quentin
  • Shirley, Ian
  • Catalán, Gustau
  • Lira-Cantú, Mónica
This study presents a new self‐powered electronic transistor concept “the solar transistor.” The transistor effect is enabled by the functional integration of a ferroelectric‐oxide thin film and an organic bulk heterojunction. The organic heterojunction efficiently harvests photon energy and splits photogenerated excitons into free electron and holes, and the ferroelectric film acts as a switchable electron transport layer with tuneable conduction band offsets that depend on its polarization state. This results in the device photoconductivity modulation. All this (i.e., carrier extraction and poling) is achieved with only two sandwiched electrodes and therefore, with the role of the gating electrode being taken by light. The two‐terminal solar‐powered phototransistor (or solaristor) thus has the added advantages of a compact photodiode architecture in addition to the nonvolatile functionality of a ferroelectric memory that is written by voltage and nondestructively read by light., A.P.T. acknowledges Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional under contract ENE2015‐74275‐JIN. All authors acknowledge Prof. Martijn Kemerink (Linköping University) for their valuable comments, Dr. G. Sauthier for the XPS/UPS measurements, S. Amores for the lamella fabrication, and Dr. B. Ballesteros for the TEM inspection. The ICN2 is funded by the CERCA programme / Generalitat de Catalunya and by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV‐2013‐0295), for the grant ENE2016‐79282‐C5‐2‐R and the OrgEnergy Excelence NetworkCTQ2016‐81911‐REDT. To the Agència de Gestió d'Ajuts Universitaris i de Recerca for the support to consolidated Catalonia research groups 2014SGR 1212 and 1216‐F. To the COST Action StableNextSol project MP1307 and to the European Research Council (ERC) Starting Grant, project No. 308023., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interfacial engineering of metal oxides for highly stable halide perovskite solar cells

  • Mingorance, Alba
  • Xie, Haibing
  • Kim, Hui-Seon
  • Wang, Zaiwei
  • Balsells, Marc
  • Morales-Melgares, Anna
  • Domingo, Neus
  • Kazuteru, Nonomura
  • Tress, Wolfgang
  • Fraxedas, J.
  • Vlachopoulos, Nick
  • Hagfeldt, Anders
  • Lira-Cantú, Mónica
Oxides employed in halide perovskite solar cells (PSCs) have already demonstrated to deliver enhanced stability, low cost, and the ease of fabrication required for the commercialization of the technology. The most stable PSCs configuration, the carbon‐based hole transport layer‐free PSC (HTL‐free PSC), has demonstrated a stability of more than one year of continuous operation partially due to the dual presence of insulating oxide scaffolds and conductive oxides. Despite these advances, the stability of PSCs is still a concern and a strong limiting factor for their industrial implementation. The engineering of oxide interfaces functionalized with molecules (like self‐assembly monolayers) or polymers results in the passivation of defects (traps), providing numerous advantages such as the elimination of hysteresis and the enhancement of solar cell efficiency. But most important is the beneficial effect of interfacial engineering on the lifetime and stability of PSCs. In this work, the authors provide a brief insight into the recent developments reported on the surface functionalization of oxide interfaces in PSCs with emphasis on the effect of device stability. This paper also discusses the different binding modes, their effect on defect passivation, band alignment or dipole formation, and how these parameters influence device lifetime., This work was carried out under the Materials Science Ph.D. Degree for A.M. of the Universitat Autònoma de Barcelona. H.‐S.K. is grateful for the postdoctoral fellowship grant (NRF‐2016R1A6A3A03012393), to the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) through the Severo Ochoa Centers of Excellence Programme under Grant No. SEV‐2013‐0295, Grant No. ENE2016‐79282‐C5‐2‐R, and the OrgEnergy Excellence Network CTQ2016‐81911‐REDT. To the Agència de Gestió d'Ajuts Universitaris i de Recerca (AGAUR) for the support to the consolidated Catalonia Research Group 2017 SGR‐329 and the Xarxa de Referència en Materials Avançats per a l'Energia (Xarmae), and to the Centres de Recerca de Catalunya (CERCA) Programme/Generalitat de Catalunya and the European COST Action StableNextSol project MP1307., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

PbZrTiO3 ferroelectric oxide as an electron extraction material for stable halide perovskite solar cells

  • Pérez-Tomás, Amador
  • Xie, Haibing
  • Wang, Zaiwei
  • Kim, Hui-Seon
  • Shirley, Ian
  • Turren-Cruz, Silver-Hamill
  • Morales-Melgares, Anna
  • Saliba, Benedicte
  • Tanenbaum, David M.
  • Saliba, Michael
  • Zakeeruddin, Shaik Mohammed
  • Grätzel, Michael
  • Lira-Cantú, Mónica
State-of-the-art halide perovskite solar cells employ semiconductor oxides as electron transport materials. Defects in these oxides, such as oxygen vacancies (Ovac), act as recombination centres and, in air and UV light, reduce the stability of the solar cell. Under the same conditions, the PbZrTiO3 ferroelectric oxide employs Ovac for the creation of defect-dipoles responsible for photo-carrier separation and current transport, evading device degradation. We report the application of PbZrTiO3 as the electron extraction material in triple cation halide perovskite solar cells. The application of a bias voltage (poling) up to 2 V, under UV light, is a critical step to induce charge transport in the ferroelectric oxide. Champion cells result in power conversion efficiencies of ∼11% after poling. Stability analysis, carried out at 1-sun AM 1.5 G, including UV light in air for unencapsulated devices, shows negligible degradation for hours. Our experiments indicate the effect of ferroelectricity, however alternative conducting mechanisms affected by the accumulation of charges or the migration of ions (or the combination of them) cannot be ruled out. Our results demonstrate, for the first time, the application of a ferroelectric oxide as an electron extraction material in efficient and stable PSCs. These findings are also a step forward in the development of next generation ferroelectric oxide-based electronic and optoelectronic devices., M. G. and S. M. Z. thank the European Union's Horizon 2020 programme, through a FET Open research and innovation action under grant agreement No. 687008 and the King Abdulaziz City for Science and Technology (KACST) for the financial support. H.-S. K. is grateful for the postdoctoral fellowship grant (NRF-2016R1A6A3A03012393). M. S. acknowledges support from the co-funded Marie Skłodowska Curie fellowship, H2020 grant agreement no. 665667. To the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295 and for the postdoctoral contract for H. X.; for the grant ENE2016-79282-C5-2-R and the OrgEnergy Excelence Network CTQ2016-81911-REDT. To the Agència de Gestió d'Ajuts Universitaris i de Recerca for the support to the consolidated Catalonia research group 2017 SGR-329 and the Xarxa de Referència en Materials Avançats per a l'Energia (Xarmae). To the Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) for the contract ENE2015-74275-JIN to A. P. To the CERCA Programme/Generalitat de Catalunya and to the European COST Action StableNextSol project MP1307., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures

  • Khenkin, Mark V.
  • Katz, Eugene A.
  • Abate, Antonio
  • Bardizza, Giorgio
  • Berry, Joseph J.
  • Brabec, Christoph
  • Brunetti, Francesca
  • Bulović, Vladimir
  • Burlingame, Quinn
  • Di Carlo, Aldo
  • Cheacharoen, Rongrong
  • Cheng, Yi-Bing
  • Colsmann, Alexander
  • Cros, Stephane
  • Domanski, Konrad
  • Dusza, Michal
  • Fell, Christopher J.
  • Forrest, Stephen R.
  • Galagan, Yulia
  • di Girolamo, Diego
  • Grätzel, Michael
  • Hagfeldt, Anders
  • Hauff, Elizabeth von
  • Hoppe, Harald
  • Kettle, Jeff
  • Köbler, Hans
  • Leite, Marina S.
  • Liu, Shengzhong
  • Loo, Yueh-Lin
  • Luther, Joseph M.
  • Ma, Chang-Qi
  • Madsen, Morten
  • Manceau, Matthieu
  • Matheron, Muriel
  • McGehee, Michael
  • Meitzner, Rico
  • Nazeeruddin, Mohammad Khaja
  • Nogueira, Ana Flavia
  • Odabaşi, Çağla
  • Osherov, Anna
  • Park, Nam-Gyu
  • Reese, Matthew O.
  • Rossi, Francesca de
  • Saliba, Michael
  • Schubert, Ulrich S.
  • Snaith, Henry J.
  • Stranks, Samuel D.
  • Tress, Wolfgang
  • Troshin, Pavel
  • Turkovic, Vida
  • Veenstra, Sjoerd
  • Visoly-Fisher, Iris
  • Walsh, Aron
  • Watson, Trystan
  • Xie, Haibing
  • Yıldırım, Yamazan
  • Zakeeruddin, Shaik Mohammed
  • Zhu, Kai
  • Lira-Cantú, Mónica
Improving the long-term stability of perovskite solar cells is critical to the deployment of this technology. Despite the great emphasis laid on stability-related investigations, publications lack consistency in experimental procedures and parameters reported. It is therefore challenging to reproduce and compare results and thereby develop a deep understanding of degradation mechanisms. Here, we report a consensus between researchers in the field on procedures for testing perovskite solar cell stability, which are based on the International Summit on Organic Photovoltaic Stability (ISOS) protocols. We propose additional procedures to account for properties specific to PSCs such as ion redistribution under electric fields, reversible degradation and to distinguish ambient-induced degradation from other stress factors. These protocols are not intended as a replacement of the existing qualification standards, but rather they aim to unify the stability assessment and to understand failure modes. Finally, we identify key procedural information which we suggest reporting in publications to improve reproducibility and enable large data set analysis., This article is based upon work from COST Action StableNextSol MP1307 supported by COST (European Cooperation in Science and Technology). M.V.K., E.A.K., V.B. and A.O. thank the financial support of the United States – Israel Binational Science Foundation (grant no. 2015757). E.A.K., A.A. and I.V.-F. acknowledge partial support from the SNaPSHoTs project in the framework of the German-Israeli bilateral R&D cooperation in the field of applied nanotechnology. M.S.L. thanks the financial support of National Science Foundation (ECCS, award #1610833). S.C., M.Manceau and M.Matheron thank the financial support of European Union’s Horizon 2020 research and innovation programme under grant agreement no 763989 (APOLO project). F.D.R. and T.M.W. would like to acknowledge the support from the Engineering and Physical Sciences Research Council (EPSRC) through the SPECIFIC Innovation and Knowledge Centre (EP/N020863/1) and express their gratitude to the Welsh Government for their support of the Ser Solar programme. P.A.T. acknowledges financial support from the Russian Science Foundation (project No. 19-73-30020). J.K. acknowledges the support by the Solar Photovoltaic Academic Research Consortium II (SPARC II) project, gratefully funded by WEFO. M.K.N. acknowledges financial support from Innosuisse project 25590.1 PFNM-NM, Solaronix, Aubonne, Switzerland. C.-Q.M. would like to acknowledge The Bureau of International Cooperation of Chinese Academy of Sciences for the support of ISOS11 and the Ministry of Science and Technology of China for the financial support (no. 2016YFA0200700). N.G.P. acknowledges financial support from the National Research Foundation of Korea (NRF) grants funded by the Ministry of Science, ICT Future Planning (MSIP) of Korea under contracts NRF-2012M3A6A7054861 and NRF-2014M3A6A7060583 (Global Frontier R&D Program on Center for Multiscale Energy System). CSIRO’s contribution to this work was conducted with funding support from the Australian Renewable Energy Agency (ARENA) through its Advancing Renewables Program. A.F.N gratefully acknowledges support from FAPESP (Grant 2017/11986-5) and Shell and the strategic importance of the support given by ANP (Brazil’s National Oil, Natural Gas and Biofuels Agency) through the R&D levy regulation. Y.-L.L. and Q.B. acknowledge support from the National Science Foundation Division of Civil, Mechanical and Manufacturing Innovation under award no. 1824674. S.D.S. acknowledges the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (HYPERION, grant agreement no. 756962), and the Royal Society and Tata Group (UF150033). The work at the National Renewable Energy Laboratory was supported by the US Department of Energy (DOE) under contract DE-AC36-08GO28308 with Alliance for Sustainable Energy LLC, the manager and operator of the National Renewable Energy Laboratory. The authors (J.J.B, J.M.L., M.O.R, K.Z.) acknowledge support from the ‘De-risking halide perovskite solar cells’ program of the National Center for Photovoltaics, funded by the US Department of Energy, Office of Energy Efficiency and Renewable Energy, Solar Energy Technology Office. The views expressed in the article do not necessarily represent the views of the DOE or the US Government. H.J.S. acknowledges the support of EPSRC UK, Engineering and Physical Sciences Research Council. V.T. and M.Madsen acknowledge ‘Villum Foundation’ for funding of the project CompliantPV, under project no. 13365. M.Madsen acknowledges Danmarks Frie Forskningsfond, DFF FTP for funding of the project React-PV, no. 8022-00389B. M.G. and S.M.Z. thank the King Abdulaziz City for Science and technology (KACST) for financial support. S.V. acknowledges TKI-UE/Ministry of Economic Affairs for financial support of the TKI-UE toeslag project POP-ART (no. 1621103). RC thanks the grants for Development of New Faculty Staff, Ratchadaphiseksomphot Endowment Fund. A.D.C. gratefully acknowledges funding from the European Union’s Horizon 2020 Research and Innovation Program (grant agreement no. 785219-GrapheneCore2 and no. 764047-ESPResSo). M.L.C. and H.X. acknowledges the support from Spanish MINECO for the grant GraPErOs (ENE2016-79282-C5-2-R), the OrgEnergy Excellence Network CTQ2016-81911- REDT, the Agència de Gestiód’Ajuts Universitaris i de Recerca (AGAUR) for the support to the consolidated Catalonia research group 2017 SGR 329 and the Xarxa de Referència en Materials Avançats per a l’Energia (Xarmae). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effects of the methylammonium ion substitution by 5-ammoniumvaleric acid in lead trihalide perovskite solar cells: a combined experimental and theoretical investigation

  • Urzúa-Leiva, Rodrigo
  • Shandy, Amir Narymany
  • Xie, Haibing
  • Lira-Cantú, Mónica
  • Cárdenas-Jirón, Gloria
In the last decade, lead triiodide perovskite (APbI3) (A: organic cation) solar cells (PSCs) have been broadly studied due to their promising features related to the low cost, easy manufacturing process, and stability. Strategies to improve the device stability include the application of techniques such as compositional engineering of the cation of these halide perovskites, but it is still a complex task to find the right balance between the stability and power conversion efficiency of materials and complete devices. In this work, we performed a combined study of five samples of [5-AVA(1−x)MAx]PbI3 (5-AVA: ammonium valeric acid and MA: methylammonium) with x = 1.0, 0.75, 0.5, 0.25 and 0.0, using X-ray diffraction (XRD) and UV-VIS spectroscopy measurements in combination with periodic density functional theory (DFT) based calculations. Our samples showed an optical bandgap of 1.58 eV and the coexistence of the two phases as observed by XRD analyses. The theoretical results of the bandgaps for the no mixed phases (x = 1.0 and x = 0.0) show good agreement with the experiment, obtaining bandgap values overestimated by 0.18 eV and 0.33 eV, respectively. A direct relation between the number of 5-AVA ions in the samples and the stability of the phases was theoretically found and proved through the increment observed in the bandgap and the cohesive energy. We proposed a compositional strategy for perovskites [5-AVA(1−x)MAx]PbI3 with x values of at most 0.5, based on the small blue-shift and the low absorbance reduction of the spectrum curve, added to the small phase stabilization found., We are thankful for the financial support from USACH under the Project POSTDOC_DICYT, Código 021941CJ_POSTDOC (R. U.-L. and G. C.-J.) Powered@NLHPC. This research was partially supported by the supercomputing infrastructure of the NLHPC (ECM-02) of the Universidad de Chile. M. L. C. and H. X. acknowledge the support from Spanish MINECO for grants ENE2016-79282-C5-2-R and PID2019-104272RB-C54, the OrgEnergy Excellence Network CTQ2016-81911-REDT, the Agència de Gestiód'Ajuts Universitaris i de Recerca (AGAUR) for the support to the consolidated Catalonia research group 2017 SGR 329 and the Xarxa de Referència en Materials Avançats per a l'Energia (Xarmae). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unraveling the key relationship between perovskite capacitive memory, long timescale cooperative relaxation phenomena, and anomalous J–V hysteresis

  • Hernández-Balaguera, Enrique
  • Pozo, Gonzalo del
  • Arredondo, Belén
  • Romero, Beatriz
  • Pereyra, Carlos
  • Xie, Haibing
  • Lira-Cantú, Mónica
Capacitive response at long time scales seems to remain an elusive feature in the analysis of the electrical properties of perovskite-based solar cells. It belongs to one of the critical anomalous effects that arises from the characteristic phenomenology of this type of emerging photovoltaic devices. Thereby, accurately deducing key capacitance feature of new light harvesting perovskites from electrical measurements represents a significant challenge regarding the interpretation of physical processes and the control of undesired mechanisms, such as slow dynamic effects and/or current density–voltage (J–V) hysteresis. Herein, it is shown that long timescale mechanisms that give rise to hysteresis in stable and high-efficiency quadruple-cation perovskites are not due to a classical capacitive behavior in the sense of ideal charge accumulation processes. Instead, it is a phenomenological consequence of slow memory-based capacitive currents and the underlying cooperative relaxations. A fractional dynamics approach, based on the idea of capacitance distribution in perovskite devices, reliably models the slow transient phenomena and the consequent scan-rate- and bias-dependent hysteresis. Observable for a wide variety of photovoltaic halide perovskites, distributed capacitive effects are rather universal anomalous phenomena, which can be related to the long-time electrical response and hysteresis., This work was supported by Comunidad de Madrid under the SINFOTON2-CM Research Program, S2018/NMT4326-SINFOTON2-CM, the Ministerio de Economía, Industria y Competitividad, Project TEC2016-77242-C3-3-R, and the European Regional Development Fund (fondos FEDER). To the Ministerio de Ciencia e Innovación for the grant GraPErOs (ENE2016-79282-C5-2-R) and the Self-Power (PID2019-104272RB-C54). To the Agència de Gestiód'Ajuts Universitaris i de Recerca (AGAUR) for the support to the consolidated Catalonia research group 217 SGR 329 and the Xarxa d'R+D+I Energy for Society (XRE4S). Part of this work is under Materials Science Ph.D. Degree for C.P. of the Universitat Autónoma de Barcelona. The authors thank CONACYT for the scholarship to C.P. ICN2 was supported by the Severo Ochoa program from MINECO (SEV-2017-0706) and was funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stress-mediated solution deposition method to stabilize ferroelectric BiFe1-xCrxO3 perovskite thin films with narrow bandgaps

  • Jiménez, Ricardo
  • Ricote, J.
  • Bretos, Íñigo
  • Jiménez Riobóo, R. J.
  • Mompean, Federico J.
  • Ruiz, Ana
  • Xie, Haibing
  • Lira-Cantú, Mónica
  • Calzada, M. L.
Ferroelectric oxides with low bandgaps are mainly based on the BiFeO perovskite upon the partial substitution of iron with different cations. However, the structural stability of many of these perovskites is only possible by their processing at high pressures (HP, >1GPa) and high temperatures (HT, >700ºC). Preparation methods under these severe conditions are accessible to powders and bulk ceramics. However, transferring these conditions to the fabrication of thin films is a challenge, thus limiting their use in applications. Here, a chemical solution deposition method is devised, which overcomes many of these restrictions. It is based on the application of an external compressive-stress to the film sample during the thermal treatment required for the film crystallization, promoting the formation and stabilization of these HP perovskites. We demonstrate the concept on BiFeCrO (BFCO) thin films deposited on SrTiO (STO) substrates and with large chromium contents. The resulting BFCO perovskite films show narrow bandgaps (Eg∼2.57 eV) and an excellent ferroelectric response (remnant polarization, P∼ 40 μC cm). The polarized thin films under illumination present a large out-put power of ∼6.4 μW cm, demonstrating their potential for using in self-powered multifunctional devices. This stress-mediated solution deposition method can be extended to other perovskite films which are unviable under conventional deposition methods., This work has been financed by Spanish Projects PID2019-104732RB-I00, MAT2016-76851-R, MAT2017-91772-EXP (AEI/FEDER, UE) and RTI2018-096918-B-C41. I.B. acknowledges financial support from the Ramón&Cajal Spanish Programm. We thank Dr. M. Coll and P. Machado for the deposition of LSMO layers on the STO substrates (Instituto de Ciencia de Materiales de Barcelona ICMAB-CSIC). M.L.-C. and H.X. acknowledges the support from Spanish MINECO for the grant GraPErOs (ENE2016-79282-C5-2-R), the OrgEnergy Excellence NetworkCTQ2016-81911- REDT, the Agència de Gestiód'Ajuts Universitaris i de Recerca (AGAUR) for the support to the consolidated Catalonia research group 2017 SGR 329 and the Xarxa de Referència en Materials Avançats per a l'Energia (Xarmae). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme / Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Universal control strategy for anomalous ionic-electronic phenomenology in perovskite solar cells efficiency measurements

  • Hernández-Balaguera, Enrique
  • Muñoz-Díaz, Laura
  • Pereyra, Carlos
  • Lira-Cantú, Mónica
  • Najafi, Mehrdad
  • Galagan, Yulia
The unprecedented increase of photovoltaic perovskites performance metrics has been obscured by the puzzling phenomenology underlying the device's anomalous ionic/electronic landscape. Thus, the establishment of a reliable measurement protocol of efficiency measurements, unanimously adopted by the perovskite's community, is indeed necessary to ensure comparability of device performance between different research laboratories. Here, we report a control strategy of ionic-electronic cooperative relaxation phenomena, eliminating the “hysteria around hysteresis”. The procedure, based on mixed engineering strategies, solves the problem that arises from the difficulty of providing steady-state device operation conditions, capturing in turn the anomalous capacitive behavior. From the determination of an optimal scan rate for J–V modeling, we provide an experimental visualization of the interplay between perovskites' ionic and electronic responses. The results of this combined theoretical and experimental study identify key guidelines about assessment procedural of device performance that should be taken into account in future publications to further improve reproducibility in the research field., This work has been supported by Comunidad de Madrid under the SINFOTON2-CM Research Program, S2018/NMT4326-SINFOTON2-CM, Universidad Rey Juan Carlos, Projects M2180 and M2417, the Ministerio de Economía, Industria y Competitividad, Project TEC2016-77242-C3-3-R, and the European Regional Development Fund (fondos FEDER). LMD particularly expresses her gratitude to the Universidad Rey Juan Carlos for the Pre-PhD contract (PREDOC21-026) granted to her. To the Ministerio de Ciencia e Innovación for the grant GraPErOs (ENE2016-79282-C5-2-R) and the Self-Power (PID2019-104272RB-C54). To the Agència de Gestiód’Ajuts Universitaris i de Recerca (AGAUR) for the support to the consolidated Catalonia research group 217 SGR 329 and the Xarxa d’R + D + I Energy for Society (XRE4S). Part of this work is under the Chemistry Ph.D. programme for CP of the Universitat Autonoma de Barcelona (UAB, Spain). We thank CONACYT for the scholarship to CP. ICN2 is supported by the Severo Ochoa program from MINECO (SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. YG acknowledges the Ministry of Science and Technology of Taiwan (MOST) for the financial support provided under the project number 110-2222-E-002-001-MY3.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Parameterization of the apparent chemical inductance of metal halide perovskite solar cells exhibiting constant-phase-element behavior

  • Hernández-Balaguera, Enrique
  • Arredondo, Belén
  • Pereyra, Carlos
  • Lira-Cantú, Mónica
A better characterization of the rich variety of anomalous ionic-electronic mechanisms in organic-inorganic metal halide perovskite solar cells is essential to obtain a stable and physically robust interpretation of the dynamic responses obtained. Therefore, new approaches towards light intensity-induced effects understanding are intensively searched for. Among all the mechanisms whose elucidation is locked and still under live debate, the apparent inductance phenomena stand out, which are visible not only in photovoltaic devices and optoelectronic elements, but also, for instance, in electrochemical and biological systems. Usually, the negative loops in impedance spectra are modeled through ideal elements (negative capacitance or inductance) although the results show systematic deviations (constant-phase-element behavior). In most scenarios, the influence of chemical inductance dispersion is somehow neglected, that is, ideal conditions are mimicked, omitting the practical device operation. Here we reformulate the theory that captures the slow (non-electromagnetic) inductive effects in the current-voltage curves of perovskite solar cells, deciphering the microscale behavior, consisting essentially of defects associated with deep trap states, from macroscale observations and experimental measurements. The audience is potentially huge, since many authors of multidisciplinary backgrounds are genuinely interested in adequately interpreting this behavior of general character., This work has been supported by Comunidad de Madrid under the SINFOTON2-CM Research Program, S2018/NMT4326-SINFOTON2-CM, Universidad Rey Juan Carlos, Projects M2180 and M2607, and the European Regional Development Fund (fondos FEDER). To the Ministerio de Ciencia e Innovación for the grant GraPErOs (ENE2016-79282-C5-2-R) and the Self-Power (PID2019-104272RB-C54). To the Agència de Gestiód’Ajuts Universitaris i de Recerca (AGAUR) for the support to the consolidated Catalonia research group 217 SGR 329 and the Xarxa d’R + D + I Energy for Society (XRE4S). Part of this work is under the Chemistry Ph.D. programme for Carlos Pereyra of the Universitat Autonoma de Barcelona (UAB, Spain). We thank CONACYT for the scholarship to Carlos Pereyra. ICN2 is supported by the Severo Ochoa program from MINECO (SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

PbZrTiO3 ferroelectric oxide as an electron extraction material for stable halide perovskite solar cells

  • Perez-Tomas, Amador|||0000-0002-0551-3142
  • Xie, Haibing|||0000-0002-5070-2882
  • Wang, Zaiwei
  • Kim, Hui-Seon|||0000-0002-9928-3033
  • Shirley, Ian
  • Turren-Cruz, Silver-Hamill|||0000-0003-3191-6188
  • Morales Melgares, Anna
  • Saliba, Benedicte
  • Tanenbaum, David M.|||0000-0002-6070-8882
  • Saliba, Michael|||0000-0002-6818-9781
  • Zakeeruddin, Shaik Mohammed|||0000-0003-0655-4744
  • Grätzel, Michael|||0000-0002-0068-0195
  • Hagfeldt, Anders|||0000-0001-6725-8856
  • Lira-Cantu, Monica|||0000-0002-3393-7436
State-of-the-art halide perovskite solar cells employ semiconductor oxides as electron transport materials. Defects in these oxides, such as oxygen vacancies (O ), act as recombination centres and, in air and UV light, reduce the stability of the solar cell. Under the same conditions, the PbZrTiO ferroelectric oxide employs O for the creation of defect-dipoles responsible for photo-carrier separation and current transport, evading device degradation. We report the application of PbZrTiO as the electron extraction material in triple cation halide perovskite solar cells. The application of a bias voltage (poling) up to 2 V, under UV light, is a critical step to induce charge transport in the ferroelectric oxide. Champion cells result in power conversion efficiencies of ∼11% after poling. Stability analysis, carried out at 1-sun AM 1.5 G, including UV light in air for unencapsulated devices, shows negligible degradation for hours. Our experiments indicate the effect of ferroelectricity, however alternative conducting mechanisms affected by the accumulation of charges or the migration of ions (or the combination of them) cannot be ruled out. Our results demonstrate, for the first time, the application of a ferroelectric oxide as an electron extraction material in efficient and stable PSCs. These findings are also a step forward in the development of next generation ferroelectric oxide-based electronic and optoelectronic devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Effect of cs-incorporated NiOx on the performance of perovskite solar cells

  • Kim, Hui-Seon|||0000-0002-9928-3033
  • Seo, Ji-Youn
  • Xie, Haibing|||0000-0002-5070-2882
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Zakeeruddin, Shaik Mohammed|||0000-0003-0655-4744
  • Grätzel, Michael|||0000-0002-0068-0195
  • Hagfeldt, Anders|||0000-0001-6725-8856
The effect of Cs-incorporated NiO on perovskite solar cells with an inverted structure was investigated, where NiO and PCBM were used as selective contacts for holes and electrons, respectively. It was found that the generation of an Ni phase in an NiO layer was significantly suppressed by employing cesium. Furthermore, Cs-incorporated NiO enabled holes to be efficiently separated at the interface, showing the improved photoluminescent quenching and thus generating higher short-circuit current. The effect of Cs incorporation was also prominent in the inhibition of recombination. The recombination resistance of Cs-incorporated NiO was noticeably increased by more than three-fold near the maximum power point leading to a higher fill factor of 0.78 and consequently a higher power conversion efficiency of 17.2% for the device employing Cs-incorporated NiO.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A solar transistor and photoferroelectric memory

  • Perez-Tomas, Amador|||0000-0002-0551-3142
  • Lima, F. Anderson S.
  • Billon, Quentin
  • Shirley, Ian
  • Catalan, Gustau|||0000-0003-0214-4828
  • Lira-Cantu, Monica|||0000-0002-3393-7436
This study presents a new self-powered electronic transistor concept "the solar transistor." The transistor effect is enabled by the functional integration of a ferroelectric-oxide thin film and an organic bulk heterojunction. The organic heterojunction efficiently harvests photon energy and splits photogenerated excitons into free electron and holes, and the ferroelectric film acts as a switchable electron transport layer with tuneable conduction band offsets that depend on its polarization state. This results in the device photoconductivity modulation. All this (i.e., carrier extraction and poling) is achieved with only two sandwiched electrodes and therefore, with the role of the gating electrode being taken by light. The two-terminal solar-powered phototransistor (or solaristor) thus has the added advantages of a compact photodiode architecture in addition to the nonvolatile functionality of a ferroelectric memory that is written by voltage and nondestructively read by light.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Effects of the methylammonium ion substitution by 5-ammoniumvaleric acid in lead trihalide perovskite solar cells, a combined experimental and theoretical investigation

  • Urzua-Leiva, Rodrigo|||0000-0002-6953-2721
  • Shandy, Amir Narymany
  • Xie, Haibing|||0000-0002-5070-2882
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Cardenas-Jiron, Gloria|||0000-0003-4305-8088
In the last decade, lead triiodide perovskite (APbI₃) (A: organic cation) solar cells (PSCs) have been broadly studied due to their promising features related to the low cost, easy manufacturing process, and stability. Strategies to improve the device stability include the application of techniques such as compositional engineering of the cation of these halide perovskites, but it is still a complex task to find the right balance between the stability and power conversion efficiency of materials and complete devices. In this work, we performed a combined study of five samples of [5-AVA(1-x) MAx] PbI₃ (5-AVA: ammonium valeric acid and MA: methylammonium) withx= 1.0, 0.75, 0.5, 0.25 and 0.0, using X-ray diffraction (XRD) and UV-VIS spectroscopy measurements in combination with periodic density functional theory (DFT) based calculations. Our samples showed an optical bandgap of 1.58 eV and the coexistence of the two phases as observed by XRD analyses. The theoretical results of the bandgaps for the no mixed phases (x= 1.0 andx= 0.0) show good agreement with the experiment, obtaining bandgap values overestimated by 0.18 eV and 0.33 eV, respectively. A direct relation between the number of 5-AVA ions in the samples and the stability of the phases was theoretically found and proved through the increment observed in the bandgap and the cohesive energy. We proposed a compositional strategy for perovskites [5-AVA(1-x) MAx]PbI₃ with x values of at most 0.5, based on the small blue-shift and the low absorbance reduction of the spectrum curve, added to the small phase stabilization found.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

An interlaboratory study on the stability of all-printable hole transport material-free perovskite solar cells

  • De Rossi, Francesca|||0000-0002-6591-5928
  • Barbé, Jérémy
  • Tanenbaum, David M.|||0000-0002-6070-8882
  • Cinà, Lucio|||0000-0003-3508-2475
  • Castriotta, Luigi Angelo|||0000-0003-2525-8852
  • Stoichkov, Vasil
  • Wei, Zhengfei
  • Tsoi, Wing Chung
  • Kettle, Jeffrey
  • Sadula, Artem
  • Chircop, John
  • Azzopardi, Brian
  • Xie, Haibing|||0000-0002-5070-2882
  • Di Carlo, Aldo|||0000-0001-6828-2380
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Katz, Eugene A.|||0000-0001-6151-1603
  • Watson, Trystan M.|||0000-0002-8015-1436
  • Brunetti, Francesca
Comparisons between different laboratories on long-term stability analyses of perovskite solar cells (PSCs) is still lacking in the literature. This work presents the results of an interlaboratory study conducted between five laboratories from four countries. Carbon-based PSCs are prepared by screen printing, encapsulated, and sent to different laboratories across Europe to assess their stability by the application of three ISOS aging protocols: (a) in the dark (ISOS-D), (b) under simulated sunlight (ISOS-L), and (c) outdoors (ISOS-O). Over 1000 h stability is reported for devices in the dark, both at room temperature and at 65 °C. Under continuous illumination at open circuit, cells survive only for few hours, although they recover after being stored in the dark. Better stability is observed for cells biased at maximum power point under illumination. Finally, devices operate in outdoors for 30 days, with minor degradation, in two different locations (Barcelona, Spain and Paola, Malta). The findings demonstrate that open-circuit conditions are too severe for stability assessment and that the diurnal variation of the photovoltaic parameters reveals performance to be strongly limited by the fill factor, in the central hours of the day, due to the high series resistance of the carbon electrode.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures

  • Khenkin, Mark V.|||0000-0001-9201-0238
  • Katz, Eugene A.|||0000-0001-6151-1603
  • Abate, Antonio|||0000-0002-3012-3541
  • Bardizza, Giorgio
  • Berry, Joseph J.|||0000-0003-3874-3582
  • Brabec, Christoph
  • Brunetti, Francesca
  • Bulović, Vladimir
  • Burlingame, Quinn
  • Di Carlo, Aldo|||0000-0001-6828-2380
  • Cheacharoen, Rongrong
  • Cheng, Yi-Bing
  • Colsmann, Alexander|||0000-0001-9221-9357
  • Cros, Stephane
  • Domanski, Konrad|||0000-0002-8115-7696
  • Dusza, Michal
  • Fell, Christopher J.|||0000-0003-2517-3445
  • Forrest, Stephen R.
  • Galagan, Yulia|||0000-0002-3637-5459
  • Di Girolamo, Diego
  • Grätzel, Michael|||0000-0002-0068-0195
  • Hagfeldt, Anders|||0000-0001-6725-8856
  • Von Hauff, Elizabeth
  • Hoppe, Harald
  • Kettle, Jeff
  • Köbler, Hans|||0000-0003-0230-6938
  • Leite, Marina S.
  • Liu, Shengzhong
  • Loo, Yueh-Lin|||0000-0002-4284-0847
  • Luther, Joseph M.|||0000-0002-4054-8244
  • Ma, ChanQi|||0000-0002-9293-5027
  • Madsen, Morten|||0000-0001-6503-0479
  • Manceau, Matthieu
  • Matheron, Muriel|||0000-0002-4100-808X
  • McGehee, Michael|||0000-0001-9609-9030
  • Meitzner, Rico
  • Nazeeruddin, Mohammad Khaja|||0000-0001-5955-4786
  • Nogueira, Ana Flavia|||0000-0002-0838-7962
  • Odabaşı, Çağla|||0000-0003-3552-6371
  • Osherov, Anna
  • Park, Nam-Gyu|||0000-0003-2368-6300
  • Reese, Matthew O.
  • De Rossi, Francesca|||0000-0002-6591-5928
  • Saliba, Michael|||0000-0002-6818-9781
  • Schubert, Ulrich S.
  • Snaith, Henry J.|||0000-0001-8511-790X
  • Stranks, Samuel D.|||0000-0002-8303-7292
  • Tress, Wofgang|||0000-0002-4010-239X
  • Troshin, Pavel A.
  • Turkovic, Vida
  • Veenstra, Sjoerd|||0000-0003-3198-8069
  • Visoly-Fisher, Iris|||0000-0001-6058-4712
  • Walsh, Aron
  • Watson, Trystan M.|||0000-0002-8015-1436
  • Xie, Haibing|||0000-0002-5070-2882
  • Yıldırım, Ramazan|||0000-0001-5077-5689
  • Zakeeruddin, Shaik Mohammed|||0000-0003-0655-4744
  • Zhu, Kai|||0000-0003-0908-3909
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Improving the long-term stability of perovskite solar cells is critical to the deployment of this technology. Despite the great emphasis laid on stability-related investigations, publications lack consistency in experimental procedures and parameters reported. It is therefore challenging to reproduce and compare results and thereby develop a deep understanding of degradation mechanisms. Here, we report a consensus between researchers in the field on procedures for testing perovskite solar cell stability, which are based on the International Summit on Organic Photovoltaic Stability (ISOS) protocols. We propose additional procedures to account for properties specific to PSCs such as ion redistribution under electric fields, reversible degradation and to distinguish ambient-induced degradation from other stress factors. These protocols are not intended as a replacement of the existing qualification standards, but rather they aim to unify the stability assessment and to understand failure modes. Finally, we identify key procedural information which we suggest reporting in publications to improve reproducibility and enable large data set analysis.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Stress-mediated solution deposition method to stabilize ferroelectric BiFe1-xCrxO3 perovskite thin films with narrow bandgaps

  • Jiménez-Zavala, Ricardo|||0000-0002-5333-8529
  • Ricote, J.|||0000-0002-2907-2505
  • Bretos, Iñigo
  • Jiménez Riobóo, Rafael J.|||0000-0002-9545-0172
  • Mompean, Federico J.|||0000-0002-6346-1475
  • Ruiz y Ruiz de Gopegui, Ana
  • Xie, Haibing|||0000-0002-5070-2882
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Calzada, M. Lourdes|||0000-0002-2286-653X
Ferroelectric oxides with low bandgaps are mainly based on the BiFeO perovskite upon the partial substitution of iron with different cations. However, the structural stability of many of these perovskites is only possible by their processing at high pressures (HP,.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Interfacial engineering of metal oxides for highly stable halide perovskite solar cells

  • Mingorance, Alba
  • Xie, Haibing|||0000-0002-5070-2882
  • Kim, Hui-Seon|||0000-0002-9928-3033
  • Wang, Zaiwei
  • Balsells, Marc|||0000-0001-6475-1514
  • Morales Melgares, Anna
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Kazuteru, Nonomura
  • Tress, Wolfgang
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Vlachopoulos, Nick
  • Hagfeldt, Anders|||0000-0001-6725-8856
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Oxides employed in halide perovskite solar cells (PSCs) have already demonstrated to deliver enhanced stability, low cost, and the ease of fabrication required for the commercialization of the technology. The most stable PSCs configuration, the carbon-based hole transport layer-free PSC (HTL-free PSC), has demonstrated a stability of more than one year of continuous operation partially due to the dual presence of insulating oxide scaffolds and conductive oxides. Despite these advances, the stability of PSCs is still a concern and a strong limiting factor for their industrial implementation. The engineering of oxide interfaces functionalized with molecules (like self-assembly monolayers) or polymers results in the passivation of defects (traps), providing numerous advantages such as the elimination of hysteresis and the enhancement of solar cell efficiency. But most important is the beneficial effect of interfacial engineering on the lifetime and stability of PSCs. In this work, the authors provide a brief insight into the recent developments reported on the surface functionalization of oxide interfaces in PSCs with emphasis on the effect of device stability. This paper also discusses the different binding modes, their effect on defect passivation, band alignment or dipole formation, and how these parameters influence device lifetime.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Multi-component engineering to enable long-term operational stability of perovskite solar cells

  • Xie, Haibing|||0000-0002-5070-2882
  • Lira-Cantu, Monica|||0000-0002-3393-7436
With a record efficiency above 25%, the main hurdle for the commercialization of perovskite solar cells (PSCs) is their long-term operational stability. Although different strategies have been applied, the stability of PSCs is still far below the 25 year requirement demonstrated by commercial photovoltaic technologies. To advance in the former, a lab-scale stability analysis should resemble real testing conditions, and this is only possible through the interaction of several stress factors. Here, we briefly introduce the reader to the general degradation mechanisms observed on PSCs and the state-of-the-art strategies applied to realize long-term stable devices. Finally, we highlight the imperative need to engineer multiple components of the PSCs simultaneously and propose a rational design of PSC's constituents to obtain long-term operational solar cells. This perspective article will benefit the progression of PSCs as a reliable photovoltaic technology.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unraveling the key relationship between perovskite capacitive memory, long timescale cooperative relaxation phenomena, and anomalous J-V hysteresis

  • Hernández-Balaguera, Enrique|||0000-0002-1400-5916
  • Del Pozo, Gonzalo|||0000-0002-0584-8559
  • Arredondo, Belén
  • Romero, Beatriz
  • Pereyra, Carlos
  • Xie, Haibing|||0000-0002-5070-2882
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Capacitive response at long time scales seems to remain an elusive feature in the analysis of the electrical properties of perovskite-based solar cells. It belongs to one of the critical anomalous effects that arises from the characteristic phenomenology of this type of emerging photovoltaic devices. Thereby, accurately deducing key capacitance feature of new light harvesting perovskites from electrical measurements represents a significant challenge regarding the interpretation of physical processes and the control of undesired mechanisms, such as slow dynamic effects and/or current density-voltage (J-V) hysteresis. Herein, it is shown that long timescale mechanisms that give rise to hysteresis in stable and high-efficiency quadruple-cation perovskites are not due to a classical capacitive behavior in the sense of ideal charge accumulation processes. Instead, it is a phenomenological consequence of slow memory-based capacitive currents and the underlying cooperative relaxations. A fractional dynamics approach, based on the idea of capacitance distribution in perovskite devices, reliably models the slow transient phenomena and the consequent scan-rate- and bias-dependent hysteresis. Observable for a wide variety of photovoltaic halide perovskites, distributed capacitive effects are rather universal anomalous phenomena, which can be related to the long-time electrical response and hysteresis.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Additive engineering for stable halide perovskite solar cells

  • Pereyra, Carlos
  • Xie, Haibing|||0000-0002-5070-2882
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Halide perovskite solar cells (PSCs) have already demonstrated power conversion efficiencies above 25%, which makes them one of the most attractive photovoltaic technologies. However, one of the main bottlenecks towards their commercialization is their long-term stability, which should exceed the 20-year mark. Additive engineering is an effective pathway for the enhancement of device lifetime. Additives applied as organic or inorganic compounds, improve crystal grain growth enhancing power conversion efficiency. The interaction of their functional groups with the halide perovskite (HP) absorber, as well as with the transport layers, results in defect passivation and ion immobilization improving device performance and stability. In this review, we briefly summarize the different types of additives recently applied in PSC to enhance not only efficiency but also long-term stability. We discuss the different mechanism behind additive engineering and the role of the functional groups of these additives for defect passivation. Special emphasis is given to their effect on the stability of PSCs under environmental conditions such as humidity, atmosphere, light irradiation (UV, visible) or heat, taking into account the recently reported ISOS protocols. We also discuss the relation between deep-defect passivation, non-radiative recombination and device efficiency, as well as the possible relation between shallow-defect passivation, ion immobilization and device operational stability. Finally, insights into the challenge and criteria for additive selection are provided for the further stability enhancement of PSCs.