Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Sustainable Self-Induced Solution Seeding Approach for Multipurpose BiFeO3 Active Layers in Flexible Electronic Devices

  • Barrios, Óscar
  • Jiménez, Ricardo
  • Ricote, J.
  • Tartaj, Pedro
  • Calzada, M. L.
  • Bretos, Íñigo
[EN] The direct integration of crystalline oxide layers into flexible electronic systems requires the development of relatively simple, low-temperature processing routes. Seeding represents a powerful strategy to reach this objective by the generation of preferential sites for the nucleation of crystalline phases with a reduced energy barrier. Here, a novel approach is reported where nanoseeds are generated in-situ from a precursor solution using a solvent-engineering strategy (solvent-antisolvent). The controlled addition of an antisolvent (1,3-propanediol) to a solution of metal salts (Bi/Fe) dissolved in acetic acid results in the formation of nanocrystals (seeds) by supersaturation. The presence of such nanoseeds is also confirmed in the deposited layers, improving significantly the crystallinity of the respective BiFeO3 thin films as complementary deduced by piezoresponse force microscopy. Using this low-temperature strategy, crystalline films are directly grown on flexible polymeric substrates at only 350 ºC showing a remanent polarization of 10.5 μC cm-2 and a clear photovoltaic effect (11.7 μW cm-2) of interest in computer memories and energy harvesters. The flexibility of the BiFeO3 thin films may enlarge the number of applications of this multifunctional, lead-free material in next-generation digital and sustainable electronic devices based on a facile, low-cost fabrication method with a reduced energy consumption., This work is part of the Spanish Projects PID2019-104732RB-I00 and MAT2017-91772-EXP funded by MCIN/AEI/10.13039/501100011033. Grant RYC-2016-20047 funded by MCIN/AEI/10.13039/501100011033. O. B. acknowledges financial support from Spanish "JAE Intro" Programme (JAEINT_19_01923)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solution processing of morphotropic phase boundary BiFeO3-PbTiO3 thin films with reduced conductivity for high room temperature switchable polarization

  • Zia, Layiq
  • Jaffari, G. Hassnain
  • Jiménez, Ricardo
  • Bretos, Íñigo
  • Amorín, Harvey
  • Algueró, Miguel
  • Rodríguez-Castellón, Enrique
  • Calzada, M. L.
[EN] The (1 – x)BiFeO-xPbTiO (BFO-PTO) perovskite solid solution has great potential for being used in practical devices, as it exhibits significant ferroelectric response at its morphotropic phase boundary (MPB). However, the significant conduction, particularly high electrical leakage currents that BFO-PTO films show at room temperature, deteriorates their functionality. This is mainly associated with the presence of multivalent iron along with A-site and oxygen vacancies. Here, solution-derived BFO-PTO thin films have been crystallized at low temperature on Pt/TiO/SiO/Si substrates, by a rapid thermal annealing process to minimize Bi and Pb volatilization. X-ray analyses have revealed that textured films are obtained with a pseudocubic perovskite structure and without the formation of detectable second phases. Microstructural studies indicated a columnar growth of the films with grain size well above the nanometric range, which, therefore, should not produce an appreciable reduction of the ferroelectric response due to size effects. Because of the relatively low content of charged defects produced in these BFO-PTO films during processing, ferroelectric hysteresis loops can be measured at room temperature. The highest value of remnant polarizations (2P= 58 μC/cm) was obtained for the 0.65BiFeO-0.35PbTiO (65BFO-35PTO) films, which suggests that this film composition lies in the proximity of the MPB where the coexistence of a highly textured <100> tetragonal phase and a rhombohedral one seems to occur., Layiq Zia acknowledges the Higher Education Commission of Pakistan (HEC) for financial support for his stay at ICMM-CSIC under the Indigenous 5000-PhD Fellowship Program (PIN: 112-27186-2PS1-143) and the International Research Support Initiative Program (IRSIP) (PIN: IRSIP 43 PSc 48). Ricardo Jiménez, Iñigo Bretos, Harvey Amorín, Miguel Algueró, and M. Lourdes Calzada acknowledge the financial support of the Spanish Projects PID2019-104732RB-I00, MAT2017-88788-R, and MAT2017-91772-EXP. Iñigo Bretos acknowledges financial support from the Ramón & Cajal Spanish Program. GHJ acknowledges financial support from the Pakistan Higher Education Commission (HEC, NRPU project number 8342). Enrique Rodríguez-Castellón thanks project RTI2018-099668-BC22 of Ministerio de Ciencia, Innovación y Universidades, and FEDER funds.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photoferroelectric Thin Films for Flexible Systems by a Three-in-One Solution-Based Approach

  • Bretos, Íñigo
  • Jiménez, Ricardo
  • Ricote, J.
  • Sirera, Rafael
  • Calzada, M. L.
[EN] The effective incorporation of (multi)functional oxides into next-generation flexible electronics systems requires novel fabrication technologies that enable the direct integration of crystalline oxide layers in them. Unfortunately, this is considerably challenging due to the thermal incompatibility between the crystallization temperatures of metal oxides (>600 °C) and the thermal stability of the flexible polymer substrates conventionally used (<400 °C). Here, it is shown that BiFeO thin films can be grown on flexible plastic by solution processing involving three different but complementary strategies to induce the crystallization of the perovskite phase at a lower temperature limit of 325 °C. This “three-in-one” approach is based on the synthesis of tailored metal precursors i) with a molecular structure resembling the crystalline structure of the oxide phase, which additionally allows both ii) photochemical and iii) internal combustion reactions taking place in the thin films. The flexible BiFeO thin films obtained from a specifically designed molecular complex with N-methyldiethanolamine yield a large remnant polarization of 17.5 µC cm, also showing photovoltaic and photocatalytic effects. This result paves the way for the direct integration of an interesting class of oxides with photoferroelectric properties in flexible devices with multiple applications in information and communication technology, and energy., Funding from Spanish Projects MAT2016-76851-R and MAT2017-91772-EXP (Ministry of Science, Innovation and Universities). I.B. acknowledges financial support from Spanish “Ramón y Cajal” Programme (RYC-2016-20047).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Stress-mediated solution deposition method to stabilize ferroelectric BiFe1-xCrxO3 perovskite thin films with narrow bandgaps

  • Jiménez-Zavala, Ricardo|||0000-0002-5333-8529
  • Ricote, J.|||0000-0002-2907-2505
  • Bretos, Iñigo
  • Jiménez Riobóo, Rafael J.|||0000-0002-9545-0172
  • Mompean, Federico J.|||0000-0002-6346-1475
  • Ruiz y Ruiz de Gopegui, Ana
  • Xie, Haibing|||0000-0002-5070-2882
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Calzada, M. Lourdes|||0000-0002-2286-653X
Ferroelectric oxides with low bandgaps are mainly based on the BiFeO perovskite upon the partial substitution of iron with different cations. However, the structural stability of many of these perovskites is only possible by their processing at high pressures (HP,.