Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

PbZrTiO3 ferroelectric oxide as an electron extraction material for stable halide perovskite solar cells

  • Perez-Tomas, Amador|||0000-0002-0551-3142
  • Xie, Haibing|||0000-0002-5070-2882
  • Wang, Zaiwei
  • Kim, Hui-Seon|||0000-0002-9928-3033
  • Shirley, Ian
  • Turren-Cruz, Silver-Hamill|||0000-0003-3191-6188
  • Morales Melgares, Anna
  • Saliba, Benedicte
  • Tanenbaum, David M.|||0000-0002-6070-8882
  • Saliba, Michael|||0000-0002-6818-9781
  • Zakeeruddin, Shaik Mohammed|||0000-0003-0655-4744
  • Grätzel, Michael|||0000-0002-0068-0195
  • Hagfeldt, Anders|||0000-0001-6725-8856
  • Lira-Cantu, Monica|||0000-0002-3393-7436
State-of-the-art halide perovskite solar cells employ semiconductor oxides as electron transport materials. Defects in these oxides, such as oxygen vacancies (O ), act as recombination centres and, in air and UV light, reduce the stability of the solar cell. Under the same conditions, the PbZrTiO ferroelectric oxide employs O for the creation of defect-dipoles responsible for photo-carrier separation and current transport, evading device degradation. We report the application of PbZrTiO as the electron extraction material in triple cation halide perovskite solar cells. The application of a bias voltage (poling) up to 2 V, under UV light, is a critical step to induce charge transport in the ferroelectric oxide. Champion cells result in power conversion efficiencies of ∼11% after poling. Stability analysis, carried out at 1-sun AM 1.5 G, including UV light in air for unencapsulated devices, shows negligible degradation for hours. Our experiments indicate the effect of ferroelectricity, however alternative conducting mechanisms affected by the accumulation of charges or the migration of ions (or the combination of them) cannot be ruled out. Our results demonstrate, for the first time, the application of a ferroelectric oxide as an electron extraction material in efficient and stable PSCs. These findings are also a step forward in the development of next generation ferroelectric oxide-based electronic and optoelectronic devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Boosting Photoelectrochemical Water Oxidation of Hematite in Acidic Electrolytes by Surface State Modification

  • Tang, PengYi|||0000-0002-2306-095X
  • Han, Li-Juan
  • Hegner, Franziska Simone
  • Paciok, Paul
  • Biset-Peiró, Martí|||0000-0002-1255-7733
  • Du, Hong-Chu
  • Wei, Xiankui|||0000-0003-4320-1120
  • Jin, Lei
  • Xie, Haibing|||0000-0002-5070-2882
  • Shi, Qin
  • Andreu, Teresa|||0000-0002-2804-4545
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • López, Núria|||0000-0001-9150-5941
  • Galán-Mascarós, José Ramón|||0000-0001-7983-9762
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
State-of-the-art water-oxidation catalysts (WOCs) in acidic electrolytes usually contain expensive noble metals such as ruthenium and iridium. However, they too expensive to be implemented broadly in semiconductor photoanodes for photoelectrochemical (PEC) water splitting devices. Here, an Earth-abundant CoFe Prussian blue analogue (CoFe-PBA) is incorporated with core-shell FeO/FeTiO type II heterojunction nanowires as composite photoanodes for PEC water splitting. Those deliver a high photocurrent of 1.25 mA cm at 1.23 V versus reversible reference electrode in acidic electrolytes (pH = 1). The enhancement arises from the synergic behavior between the successive decoration of the hematite surface with nanolayers of FeTiO and then, CoFe-PBA. The underlying physical mechanism of performance enhancement through formation of the FeO/FeTiO/CoFe-PBA heterostructure reveals that the surface states' electronic levels of hematite are modified such that an interfacial charge transfer becomes kinetically favorable. These findings open new pathways for the future design of cheap and efficient hematite-based photoanodes in acidic electrolytes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Effects of the methylammonium ion substitution by 5-ammoniumvaleric acid in lead trihalide perovskite solar cells, a combined experimental and theoretical investigation

  • Urzua-Leiva, Rodrigo|||0000-0002-6953-2721
  • Shandy, Amir Narymany
  • Xie, Haibing|||0000-0002-5070-2882
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Cardenas-Jiron, Gloria|||0000-0003-4305-8088
In the last decade, lead triiodide perovskite (APbI₃) (A: organic cation) solar cells (PSCs) have been broadly studied due to their promising features related to the low cost, easy manufacturing process, and stability. Strategies to improve the device stability include the application of techniques such as compositional engineering of the cation of these halide perovskites, but it is still a complex task to find the right balance between the stability and power conversion efficiency of materials and complete devices. In this work, we performed a combined study of five samples of [5-AVA(1-x) MAx] PbI₃ (5-AVA: ammonium valeric acid and MA: methylammonium) withx= 1.0, 0.75, 0.5, 0.25 and 0.0, using X-ray diffraction (XRD) and UV-VIS spectroscopy measurements in combination with periodic density functional theory (DFT) based calculations. Our samples showed an optical bandgap of 1.58 eV and the coexistence of the two phases as observed by XRD analyses. The theoretical results of the bandgaps for the no mixed phases (x= 1.0 andx= 0.0) show good agreement with the experiment, obtaining bandgap values overestimated by 0.18 eV and 0.33 eV, respectively. A direct relation between the number of 5-AVA ions in the samples and the stability of the phases was theoretically found and proved through the increment observed in the bandgap and the cohesive energy. We proposed a compositional strategy for perovskites [5-AVA(1-x) MAx]PbI₃ with x values of at most 0.5, based on the small blue-shift and the low absorbance reduction of the spectrum curve, added to the small phase stabilization found.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

An interlaboratory study on the stability of all-printable hole transport material-free perovskite solar cells

  • De Rossi, Francesca|||0000-0002-6591-5928
  • Barbé, Jérémy
  • Tanenbaum, David M.|||0000-0002-6070-8882
  • Cinà, Lucio|||0000-0003-3508-2475
  • Castriotta, Luigi Angelo|||0000-0003-2525-8852
  • Stoichkov, Vasil
  • Wei, Zhengfei
  • Tsoi, Wing Chung
  • Kettle, Jeffrey
  • Sadula, Artem
  • Chircop, John
  • Azzopardi, Brian
  • Xie, Haibing|||0000-0002-5070-2882
  • Di Carlo, Aldo|||0000-0001-6828-2380
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Katz, Eugene A.|||0000-0001-6151-1603
  • Watson, Trystan M.|||0000-0002-8015-1436
  • Brunetti, Francesca
Comparisons between different laboratories on long-term stability analyses of perovskite solar cells (PSCs) is still lacking in the literature. This work presents the results of an interlaboratory study conducted between five laboratories from four countries. Carbon-based PSCs are prepared by screen printing, encapsulated, and sent to different laboratories across Europe to assess their stability by the application of three ISOS aging protocols: (a) in the dark (ISOS-D), (b) under simulated sunlight (ISOS-L), and (c) outdoors (ISOS-O). Over 1000 h stability is reported for devices in the dark, both at room temperature and at 65 °C. Under continuous illumination at open circuit, cells survive only for few hours, although they recover after being stored in the dark. Better stability is observed for cells biased at maximum power point under illumination. Finally, devices operate in outdoors for 30 days, with minor degradation, in two different locations (Barcelona, Spain and Paola, Malta). The findings demonstrate that open-circuit conditions are too severe for stability assessment and that the diurnal variation of the photovoltaic parameters reveals performance to be strongly limited by the fill factor, in the central hours of the day, due to the high series resistance of the carbon electrode.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures

  • Khenkin, Mark V.|||0000-0001-9201-0238
  • Katz, Eugene A.|||0000-0001-6151-1603
  • Abate, Antonio|||0000-0002-3012-3541
  • Bardizza, Giorgio
  • Berry, Joseph J.|||0000-0003-3874-3582
  • Brabec, Christoph
  • Brunetti, Francesca
  • Bulović, Vladimir
  • Burlingame, Quinn
  • Di Carlo, Aldo|||0000-0001-6828-2380
  • Cheacharoen, Rongrong
  • Cheng, Yi-Bing
  • Colsmann, Alexander|||0000-0001-9221-9357
  • Cros, Stephane
  • Domanski, Konrad|||0000-0002-8115-7696
  • Dusza, Michal
  • Fell, Christopher J.|||0000-0003-2517-3445
  • Forrest, Stephen R.
  • Galagan, Yulia|||0000-0002-3637-5459
  • Di Girolamo, Diego
  • Grätzel, Michael|||0000-0002-0068-0195
  • Hagfeldt, Anders|||0000-0001-6725-8856
  • Von Hauff, Elizabeth
  • Hoppe, Harald
  • Kettle, Jeff
  • Köbler, Hans|||0000-0003-0230-6938
  • Leite, Marina S.
  • Liu, Shengzhong
  • Loo, Yueh-Lin|||0000-0002-4284-0847
  • Luther, Joseph M.|||0000-0002-4054-8244
  • Ma, ChanQi|||0000-0002-9293-5027
  • Madsen, Morten|||0000-0001-6503-0479
  • Manceau, Matthieu
  • Matheron, Muriel|||0000-0002-4100-808X
  • McGehee, Michael|||0000-0001-9609-9030
  • Meitzner, Rico
  • Nazeeruddin, Mohammad Khaja|||0000-0001-5955-4786
  • Nogueira, Ana Flavia|||0000-0002-0838-7962
  • Odabaşı, Çağla|||0000-0003-3552-6371
  • Osherov, Anna
  • Park, Nam-Gyu|||0000-0003-2368-6300
  • Reese, Matthew O.
  • De Rossi, Francesca|||0000-0002-6591-5928
  • Saliba, Michael|||0000-0002-6818-9781
  • Schubert, Ulrich S.
  • Snaith, Henry J.|||0000-0001-8511-790X
  • Stranks, Samuel D.|||0000-0002-8303-7292
  • Tress, Wofgang|||0000-0002-4010-239X
  • Troshin, Pavel A.
  • Turkovic, Vida
  • Veenstra, Sjoerd|||0000-0003-3198-8069
  • Visoly-Fisher, Iris|||0000-0001-6058-4712
  • Walsh, Aron
  • Watson, Trystan M.|||0000-0002-8015-1436
  • Xie, Haibing|||0000-0002-5070-2882
  • Yıldırım, Ramazan|||0000-0001-5077-5689
  • Zakeeruddin, Shaik Mohammed|||0000-0003-0655-4744
  • Zhu, Kai|||0000-0003-0908-3909
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Improving the long-term stability of perovskite solar cells is critical to the deployment of this technology. Despite the great emphasis laid on stability-related investigations, publications lack consistency in experimental procedures and parameters reported. It is therefore challenging to reproduce and compare results and thereby develop a deep understanding of degradation mechanisms. Here, we report a consensus between researchers in the field on procedures for testing perovskite solar cell stability, which are based on the International Summit on Organic Photovoltaic Stability (ISOS) protocols. We propose additional procedures to account for properties specific to PSCs such as ion redistribution under electric fields, reversible degradation and to distinguish ambient-induced degradation from other stress factors. These protocols are not intended as a replacement of the existing qualification standards, but rather they aim to unify the stability assessment and to understand failure modes. Finally, we identify key procedural information which we suggest reporting in publications to improve reproducibility and enable large data set analysis.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Stress-mediated solution deposition method to stabilize ferroelectric BiFe1-xCrxO3 perovskite thin films with narrow bandgaps

  • Jiménez-Zavala, Ricardo|||0000-0002-5333-8529
  • Ricote, J.|||0000-0002-2907-2505
  • Bretos, Iñigo
  • Jiménez Riobóo, Rafael J.|||0000-0002-9545-0172
  • Mompean, Federico J.|||0000-0002-6346-1475
  • Ruiz y Ruiz de Gopegui, Ana
  • Xie, Haibing|||0000-0002-5070-2882
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Calzada, M. Lourdes|||0000-0002-2286-653X
Ferroelectric oxides with low bandgaps are mainly based on the BiFeO perovskite upon the partial substitution of iron with different cations. However, the structural stability of many of these perovskites is only possible by their processing at high pressures (HP,.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Interfacial engineering of metal oxides for highly stable halide perovskite solar cells

  • Mingorance, Alba
  • Xie, Haibing|||0000-0002-5070-2882
  • Kim, Hui-Seon|||0000-0002-9928-3033
  • Wang, Zaiwei
  • Balsells, Marc|||0000-0001-6475-1514
  • Morales Melgares, Anna
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Kazuteru, Nonomura
  • Tress, Wolfgang
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Vlachopoulos, Nick
  • Hagfeldt, Anders|||0000-0001-6725-8856
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Oxides employed in halide perovskite solar cells (PSCs) have already demonstrated to deliver enhanced stability, low cost, and the ease of fabrication required for the commercialization of the technology. The most stable PSCs configuration, the carbon-based hole transport layer-free PSC (HTL-free PSC), has demonstrated a stability of more than one year of continuous operation partially due to the dual presence of insulating oxide scaffolds and conductive oxides. Despite these advances, the stability of PSCs is still a concern and a strong limiting factor for their industrial implementation. The engineering of oxide interfaces functionalized with molecules (like self-assembly monolayers) or polymers results in the passivation of defects (traps), providing numerous advantages such as the elimination of hysteresis and the enhancement of solar cell efficiency. But most important is the beneficial effect of interfacial engineering on the lifetime and stability of PSCs. In this work, the authors provide a brief insight into the recent developments reported on the surface functionalization of oxide interfaces in PSCs with emphasis on the effect of device stability. This paper also discusses the different binding modes, their effect on defect passivation, band alignment or dipole formation, and how these parameters influence device lifetime.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Multi-component engineering to enable long-term operational stability of perovskite solar cells

  • Xie, Haibing|||0000-0002-5070-2882
  • Lira-Cantu, Monica|||0000-0002-3393-7436
With a record efficiency above 25%, the main hurdle for the commercialization of perovskite solar cells (PSCs) is their long-term operational stability. Although different strategies have been applied, the stability of PSCs is still far below the 25 year requirement demonstrated by commercial photovoltaic technologies. To advance in the former, a lab-scale stability analysis should resemble real testing conditions, and this is only possible through the interaction of several stress factors. Here, we briefly introduce the reader to the general degradation mechanisms observed on PSCs and the state-of-the-art strategies applied to realize long-term stable devices. Finally, we highlight the imperative need to engineer multiple components of the PSCs simultaneously and propose a rational design of PSC's constituents to obtain long-term operational solar cells. This perspective article will benefit the progression of PSCs as a reliable photovoltaic technology.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unraveling the key relationship between perovskite capacitive memory, long timescale cooperative relaxation phenomena, and anomalous J-V hysteresis

  • Hernández-Balaguera, Enrique|||0000-0002-1400-5916
  • Del Pozo, Gonzalo|||0000-0002-0584-8559
  • Arredondo, Belén
  • Romero, Beatriz
  • Pereyra, Carlos
  • Xie, Haibing|||0000-0002-5070-2882
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Capacitive response at long time scales seems to remain an elusive feature in the analysis of the electrical properties of perovskite-based solar cells. It belongs to one of the critical anomalous effects that arises from the characteristic phenomenology of this type of emerging photovoltaic devices. Thereby, accurately deducing key capacitance feature of new light harvesting perovskites from electrical measurements represents a significant challenge regarding the interpretation of physical processes and the control of undesired mechanisms, such as slow dynamic effects and/or current density-voltage (J-V) hysteresis. Herein, it is shown that long timescale mechanisms that give rise to hysteresis in stable and high-efficiency quadruple-cation perovskites are not due to a classical capacitive behavior in the sense of ideal charge accumulation processes. Instead, it is a phenomenological consequence of slow memory-based capacitive currents and the underlying cooperative relaxations. A fractional dynamics approach, based on the idea of capacitance distribution in perovskite devices, reliably models the slow transient phenomena and the consequent scan-rate- and bias-dependent hysteresis. Observable for a wide variety of photovoltaic halide perovskites, distributed capacitive effects are rather universal anomalous phenomena, which can be related to the long-time electrical response and hysteresis.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Additive engineering for stable halide perovskite solar cells

  • Pereyra, Carlos
  • Xie, Haibing|||0000-0002-5070-2882
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Halide perovskite solar cells (PSCs) have already demonstrated power conversion efficiencies above 25%, which makes them one of the most attractive photovoltaic technologies. However, one of the main bottlenecks towards their commercialization is their long-term stability, which should exceed the 20-year mark. Additive engineering is an effective pathway for the enhancement of device lifetime. Additives applied as organic or inorganic compounds, improve crystal grain growth enhancing power conversion efficiency. The interaction of their functional groups with the halide perovskite (HP) absorber, as well as with the transport layers, results in defect passivation and ion immobilization improving device performance and stability. In this review, we briefly summarize the different types of additives recently applied in PSC to enhance not only efficiency but also long-term stability. We discuss the different mechanism behind additive engineering and the role of the functional groups of these additives for defect passivation. Special emphasis is given to their effect on the stability of PSCs under environmental conditions such as humidity, atmosphere, light irradiation (UV, visible) or heat, taking into account the recently reported ISOS protocols. We also discuss the relation between deep-defect passivation, non-radiative recombination and device efficiency, as well as the possible relation between shallow-defect passivation, ion immobilization and device operational stability. Finally, insights into the challenge and criteria for additive selection are provided for the further stability enhancement of PSCs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Decoupling the effects of defects on efficiency and stability through phosphonates in stable halide perovskite solar cells

  • Xie, Haibing|||0000-0002-5070-2882
  • Wang, Zaiwei
  • Chen, Zehua
  • Pereyra, Carlos
  • Pols, Mike
  • Gałkowski, Krzysztof
  • Anaya, Miguel
  • Fu, Shuai|||0000-0003-4038-2384
  • Jia, Xiaoyu
  • Tang, PengYi|||0000-0002-2306-095X
  • Kubicki, Dominik Józef
  • Agarwalla, Anand
  • Kim, Hui-Seon|||0000-0002-9928-3033
  • Prochowicz, Daniel
  • Borrisé, Xavier|||0000-0002-6491-4763
  • Bonn, Mischa|||0000-0001-6851-8453
  • Bao, Chunxiong
  • Sun, Xiaoxiao
  • Zakeeruddin, Shaik Mohammed|||0000-0003-0655-4744
  • Emsley, Lyndon
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Gao, Feng
  • Fu, Fan
  • Wang, Hai I.|||0000-0003-0940-3984
  • Tielrooij, Klaas-Jan|||0000-0002-0055-6231
  • Stranks, Samuel D.|||0000-0002-8303-7292
  • Tao, Shuxia
  • Grätzel, Michael|||0000-0002-0068-0195
  • Hagfeldt, Anders|||0000-0001-6725-8856
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Understanding defects is of paramount importance for the development of stable halide perovskite solar cells (PSCs). However, isolating their distinctive effects on device efficiency and stability is currently a challenge. We report that adding the organic molecule 3-phosphonopropionic acid (H3pp) to the halide perovskite results in unchanged overall optoelectronic performance while having a tremendous effect on device stability. We obtained PSCs with ∼21% efficiency that retain ∼100% of the initial efficiency after 1,000 h at the maximum power point under simulated AM1.5G illumination. The strong interaction between the perovskite and the H3pp molecule through two types of hydrogen bonds (HI and OH) leads to shallow point defect passivation that has a significant effect on device stability but not on the non-radiative recombination and device efficiency. We expect that our work will have important implications for the current understanding and advancement of operational PSCs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A novel integrated platform enabling simultaneous microextraction and chemical analysis on-chip

  • Santigosa-Murillo, Elia
  • Moreno, Alexandre
  • Ramos-Payán, María
  • Rios Gallardo, Juan Manuel
  • Muñoz-Berbel, Xavier|||0000-0002-6447-5756
  • Muñoz, Maria|||0000-0001-5540-1491
  • Giménez-Gómez, Pablo|||0000-0003-3443-802X
The nature and size of biological, pharmaceutical or environmental analytes complicates their extraction and detection outside of laboratories and near the site of interest by the current chromatographic methods because they require the combination of bulky extraction and detection methods. In order to solve this inefficient centralized control, a ground-breaking and miniaturized proof of concept platform is developed in this work. The platform integrates for the very first time an electro-membrane extraction process and an accurate analyte quantification method in the same device, by using electrochemical impedance spectroscopy (EIS) as analytical technique. The microfluidic flow cell, including the microfluidic components, is fabricated in polymeric materials by rapid prototyping techniques. It comprises a four-electrode platinum thin-film chip that enables the control of the microextraction and the full characterization of the process, i.e., extraction efficiency determination, at the same time. The microfluidic system has been simulated by using computational tools, enabling an accurate prediction of the effect of the different experimental conditions in the microextraction efficiency. The platform has been validated in the microextraction of the nonsteroidal anti-inflammatory drug ketoprofen in a range from 0.5 ppm to 6 ppm. The predicted microextraction efficiency values obtained by EIS were compared with those calculated from the high-performance liquid chromatography coupled with a diode array detector (HPLC-DAD), showing an excellent agreement. This validates the high potential of this integrated and miniaturized platform for the simultaneous extraction by electro-membrane and also the analysis within the platform, solving one of the of most important limitations of current systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Roadmap on commercialization of metal halide perovskite photovoltaics

  • Feng, Shien-Ping|||0000-0002-3941-1363
  • Cheng, Yuanhang
  • Yip, Hin-Lap|||0000-0002-5750-9751
  • Zhong, Yufei|||0000-0001-9845-8607
  • Fong, Patrick W.K.|||0000-0002-2460-4525
  • Li, Gang|||0000-0001-8399-7771
  • Ng, Annie|||0000-0002-5975-2499
  • Chen, Cong
  • Castriotta, Luigi Angelo|||0000-0003-2525-8852
  • Matteocci, Fabio|||0000-0001-7893-1356
  • Vesce, Luigi|||0000-0003-3322-8688
  • Saranin, Danila
  • Di Carlo, Aldo|||0000-0001-6828-2380
  • Wang, Puqun
  • Wei Ho, Jian
  • Hou, Yi|||0000-0002-1532-816X
  • Lin, Fen
  • Aberle, Armin G.
  • Song, Zhaoning|||0000-0002-6677-0994
  • Yan, Yanfa|||0000-0003-3977-5789
  • Chen, Xu
  • Yang, Y.M.
  • Syed, Ali Asgher
  • Ahmad, Ishaq
  • Leung, Tiklun
  • Wang, Yantao
  • Lin, JingYang
  • Ng, Alan Man Ching|||0000-0001-7081-8244
  • Li, Yin
  • Ebadi, Firouzeh
  • Tress, Wolfgang
  • Richardson, Giles|||0000-0001-6225-8590
  • Ge, Chuangye
  • Hu, Hanlin
  • Karimipour, Masoud|||0000-0002-6619-4798
  • Baumann, Fanny|||0000-0003-0203-5971
  • Tanko, Kenedy T.|||0000-0002-2466-7104
  • Pereyra, Carlos
  • Raga, Sonia R.|||0000-0002-4245-9245
  • Xie, Haibing|||0000-0002-5070-2882
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Khenkin, Mark V.|||0000-0001-9201-0238
  • Visoly-Fisher, Iris|||0000-0001-6058-4712
  • Katz, Eugene A.|||0000-0001-6151-1603
  • Vaynzof, Yana|||0000-0002-0783-0707
  • Vidal, Rosario|||0000-0001-7872-0620
  • Yu, Guicheng
  • Lin, Haoran|||0000-0003-0625-8881
  • Weng, Shuchen
  • Wang, Shifeng|||0000-0001-6169-2598
  • Djurišic, Aleksandra B.|||0000-0002-5183-1467
Perovskite solar cells (PSCs) represent one of the most promising emerging photovoltaic technologies due to their high power conversion efficiency. However, despite the huge progress made not only in terms of the efficiency achieved, but also fundamental understanding of the relevant physics of the devices and issues which affect their efficiency and stability, there are still unresolved problems and obstacles on the path toward commercialization of this promising technology. In this roadmap, we aim to provide a concise and up to date summary of outstanding issues and challenges, and the progress made toward addressing these issues. While the format of this article is not meant to be a comprehensive review of the topic, it provides a collection of the viewpoints of the experts in the field, which covers a broad range of topics related to PSC commercialization, including those relevant for manufacturing (scaling up, different types of devices), operation and stability (various factors), and environmental issues (in particular the use of lead). We hope that the article will provide a useful resource for researchers in the field and that it will facilitate discussions and move forward toward addressing the outstanding challenges in this fast-developing field.