Pasar al contenido principal

SOLUCIONES DESDE LA QUIMICA DE COORDINACION PARA EL DESAFIO ENERGETICO: MATERIALES AVANZADOS PARA TRANSFORMACION Y ALMACENAMIENTO DE ENERGIA

CTQ2015-71287-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario FUNDACIO INSTITUT CATALA D INVESTIGACIO QUIMICA (ICIQ)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced activity and acid pH stability of prussian blue-type oxygen evolution electrocatalysts processed by chemical etching

  • Han, Li-Juan
  • Morante, Joan Ramón
  • Arbiol, Jordi
  • Galán-Mascarós, José Ramón
et al., The development of upscalable oxygen evolving electrocatalysts from earth-abundant metals able to operate in neutral or acidic environments and low overpotentials remains a fundamental challenge for the realization of artificial photosynthesis. In this study, we report a highly active phase of heterobimetallic cyanide-bridged electrocatalysts able to promote water oxidation under neutral, basic (pH < 13), and acidic conditions (pH > 1). Cobalt-iron Prussian blue-type thin films, formed by chemical etching of Co(OH)(CO)·nHO nanocrystals, yield a dramatic enhancement of the catalytic performance toward oxygen production, when compared with previous reports for analogous materials. Electrochemical, spectroscopic, and structural studies confirm the excellent performance, stability, and corrosion resistance, even when compared with state-of-the-art metal oxide catalysts under moderate overpotentials and in a remarkably large pH range, including acid media where most cost-effective water oxidation catalysts are not useful. The origin of the superior electrocatalytic activity toward water oxidation appears to be in the optimized interfacial matching between catalyst and electrode surface obtained through this fabrication method., This work was supported by the European Union (Project ERC StG Grant CHEMCOMP No. 279313); the Spanish Ministerio de Economia y Competitividad (MINECO) through Projects CTQ2015-71287-R, TNT-FUELS, and e-TNT (MAT2014-59961-C2-2-R) and the Severo Ochoa Excellence Accreditations 2014−2018, SEV-2013-0319 and SEV-2013-0295, the Generalitat de Catalunya (2014-SGR-797 and 2014-SGR1638), and the ICIQ foundation. A.R.C. thanks the Marie Curie COFUND Action from the European Commission for cofinancing his postdoctoral fellowship. L.H. thanks MINECO for her predoctoral fellowship. The research leading to these results has also received funding from “La Caixa” Foundation., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Conducting Anilate-Based Mixed-Valence Fe(II)Fe(III) Coordination Polymer: Small-Polaron Hopping Model for Oxalate-Type Fe(II)Fe(III) 2D Networks

  • Sahadevan, Suchithra Ashoka
  • Abhervé, Alexandre
  • Monni, Noemi
  • Sáenz de Pipaón, Cristina
  • Galán-Mascarós, José Ramón
  • Waerenborgh, Joao C.
  • Vieira, Bruno J. C.
  • Auban-Senzier, Pascale
  • Pillet, Sébastien
  • Bendeif, El-Eulmi
  • Alemany, Pere
  • Canadell, Enric
  • Mercuri, Maria Laura
  • Avarvari, Narcis
The mixed-valence FeIIFeIII 2D coordination polymer formulated as [TAG][FeIIFeIII(ClCNAn)3]·(solvate) 1 (TAG = tris(amino)-guanidinium, ClCNAn2− = chlorocyanoanilate dianionic ligand) crystallized in the polar trigonal space group P3. In the solid-state structure, determined both at 150 and at 10 K, anionic 2D honeycomb layers [FeIIFeIII(ClCNAn)3]− establish in the ab plane, with an intralayer metal−metal distance of 7.860 Å, alternating with cationic layers of TAG. The similar Fe−O distances suggest electron delocalization and an average oxidation state of +2.5 for each Fe center. The cation imposes its C3 symmetry to the structure and engages in intermolecular N−H···Cl hydrogen bonding with the ligand. Magnetic susceptibility characterization indicates magnetic ordering below 4 K and the presence of a hysteresis loop at 2 K with a coercive field of 60 Oe. Mössbauer measurements are in agreement with the existence of Fe(+2.5) ions at RT and statistic charge localization at 10 K. The compound shows semiconducting behavior with the in-plane conductivity of 2 × 10−3 S/cm, 3 orders of magnitude higher than the perpendicular one. A small-polaron hopping model has been applied to a series of oxalate-type FeIIFeIII 2D coordination polymers, providing a clear explanation on the much higher conductivity of the anilate-based systems than the oxalate ones., The work in France was supported by the CNRS, the University of Angers, the Erasmus program (mobility grant to N.M.), the RFI Regional project LUMOMAT (grant to A.A., project ASCO MMM), and the PIA project “Lorraine Université d'Excellence” (reference ANR-15-IDEX-04-LUE). This work was supported in Italy by the Fondazione di Sardegna-Convenzione triennale tra la Fondazione di Sardegna e gli Atenei Sardi, Regione Sardegna-L.R. 7/2007 annualità 2016-DGR 28/21 del 17.05.2015 “Innovative Molecular Functional Materials for Environmental and Biomedical Applications” and INSTM. Work in Spain was supported by the Spanish Ministerio de Economi ́ a y Competitividad (Grants FIS2012-37549-C05-05, FIS2015-64886-C5-4-P, CTQ2015- 64579-C3-3-P, and CTQ2015-71287-R) and Generalitat de Catalunya (2014SGR301, 2017SGR797, and XRQTC and the CERCA program). E.C. acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2015-0496. J.C.W. and B.J.C.V. acknowledge Fundaca̧ o para a Cie ̃ ncia e a Tecnologia (FCT, ̂ Portugal) through the project UID/Multi/04349/2013., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boosting photoelectrochemical water oxidation of hematite in acidic electrolytes by surface state modification

  • Tang, Peng-Yi
  • Han, Li-Juan
  • Simone Hegner, Franziska
  • Paciok, Paul
  • Biset-Peiró, Martí
  • Du, Hong-Chu
  • Wei, Xian-Kui
  • Jin, Lei
  • Xie, Haibing
  • Shi, Qin
  • Andreu, Teresa
  • Lira-Cantú, Mónica
  • Heggen, Marc
  • Dunin-Borkowski, Rafal E.
  • López, Núria
  • Galán-Mascarós, José Ramón
  • Morante, Joan Ramón
  • Arbiol, Jordi
State-of-the-art water-oxidation catalysts (WOCs) in acidic electrolytes usually contain expensive noble metals such as ruthenium and iridium. However, they too expensive to be implemented broadly in semiconductor photoanodes for photoelectrochemical (PEC) water splitting devices. Here, an Earth-abundant CoFe Prussian blue analogue (CoFe-PBA) is incorporated with core–shell Fe2O3/Fe2TiO5 type II heterojunction nanowires as composite photoanodes for PEC water splitting. Those deliver a high photocurrent of 1.25 mA cm−2 at 1.23 V versus reversible reference electrode in acidic electrolytes (pH = 1). The enhancement arises from the synergic behavior between the successive decoration of the hematite surface with nanolayers of Fe2TiO5 and then, CoFe-PBA. The underlying physical mechanism of performance enhancement through formation of the Fe2O3/Fe2TiO5/ CoFe-PBA heterostructure reveals that the surface states’ electronic levels of hematite are modified such that an interfacial charge transfer becomes kinetically favorable. These findings open new pathways for the future design of cheap and efficient hematite-based photoanodes in acidic electrolytes., This work was supported by the Spanish Ministerio de Economia y Competitividad (MINECO, Grants CTQ2015-71287-R, CTQ2015-71287-R, and CTQ2015-68770-R) and the coordinated Project ValPEC (ENE2017-85087-C3), the BIST Ignite Project inWOC2 and the Generalitat de Catalunya (2017 SGR 90, 2017 SGR 327, 2017 SGR 329, 2017 SGR 1246, and 2017 SGR 1406). ICN2 acknowledges the support from the Severo Ochoa Program (MINECO, Grant SEV-2017-0706). ICN2, ICIQ, and IREC are funded by the CERCA Programme/Generalitat de Catalunya. P.Y.T. acknowledges the scholarship support of DAAD short term grant. H.C.D. acknowledges support from the Deutsche Forschungsgemeinschaft (SFB 917). F.S.H. thanks the “LaCaixa”-Severo Ochoa International Programme (Programa internacional de Becas “LaCaixa”- Severo Ochoa) for a Ph.D. fellowship. P.P. and M.H. thank for the support by the Federal Ministry for Economic Affairs and Energy (BMWi) (Fundingregistration number: 03ET6080E). M.L. thanks the COST Action StableNextSol project MP1307, supported by COST (European Cooperation in Science and Technology). H.X. acknowledges the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295 for the postdoctoral contract., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced photoelectrochemical water splitting of hematite multilayer nanowire photoanodes by tuning the surface state via bottom-up interfacial engineering

  • Tang, PengYi|||0000-0002-2306-095X
  • Xie, Haibing|||0000-0002-5070-2882
  • Ros, Carles|||0000-0002-9148-2767
  • Han, Lijuan
  • Biset-Peiró, Martí|||0000-0002-1255-7733
  • He, Yong-Min
  • Kramer, W.
  • Pérez-Rodríguez, Alejandro
  • Saucedo, Edgardo
  • Galán-Mascarós, José Ramón|||0000-0001-7983-9762
  • Andreu, Teresa|||0000-0002-2804-4545
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
The optimization of multiple interfaces in hematite (α-Fe₂O₃) based composites for photoelectrochemical water splitting to facilitate charge transport in the bulk is of paramount importance to obtain enhanced solar-to-fuel efficiency. Herein, we report the fabrication of ITO/Fe₂O₃/Fe₂TiO₅/FeNiOOH multi-layer nanowires and a series of systematic experiments designed to elucidate the mechanism underlying the interfacial coupling effect of the quaternary hematite composite. The hierarchical ITO/Fe₂O₃/Fe₂TiO₅/FeNiOOH nanowires display photocurrents that are more than an order of magnitude greater than those of pristine Fe₂O₃ nanowires (from 0.205 mAcm⁻² to 2.2 mAcm⁻² at 1.23 V vs. RHE and 1 Sun), and higher than those of most of the recently reported state-of-the-art hematite composites. Structural, compositional and electrochemical investigations disclose that the surface states (SS) are finely regulated via the atomic addition of an Fe₂TiO₅ layer and FeNiOOH nanodots, while the upgrading of back contact conductivity and charge donor densities originate from the epitaxial relationship and enhanced Sn doping contributed from the ITO underlayer. We attribute the superior water oxidation performance to the interfacial coupling effect of the ITO underlayer (Sn doping and back contact conductivity promoter), the atomic level Fe₂TiO₅ coating (Ti doping, surface state density and energy level modulation) and the FeNiOOH nanodot electrocatalyst (regulating surface state energy level). Our work suggests an effective pathway for rational designing of highly active and cost-effective integrated photoanodes for photoelectrochemical water splitting.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced activity and acid pH stability of Prussian blue-type oxygen evolution electrocatalysts processed by chemical etching

  • Han, Lijuan
  • Tang, PengYi|||0000-0002-2306-095X
  • Reyes-Carmona, Álvaro
  • Rodríguez-García, Bárbara
  • Torréns, Mabel
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Galán-Mascarós, José Ramón|||0000-0001-7983-9762
The development of upscalable oxygen evolving electrocatalysts from earth-abundant metals able to operate in neutral or acidic environments and low overpotentials remains a fundamental challenge for the realization of artificial photosynthesis. In this study, we report a highly active phase of heterobimetallic cyanide-bridged electrocatalysts able to promote water oxidation under neutral, basic (pH < 13), and acidic conditions (pH > 1). Cobalt-iron Prussian blue-type thin films, formed by chemical etching of Co(OH)₁.₀ (CO₃)₀.₅·nH₂O nanocrystals, yield a dramatic enhancement of the catalytic performance toward oxygen production, when compared with previous reports for analogous materials. Electrochemical, spectroscopic, and structural studies confirm the excellent performance, stability, and corrosion resistance, even when compared with state-of-the-art metal oxide catalysts under moderate overpotentials and in a remarkably large pH range, including acid media where most cost-effective water oxidation catalysts are not useful. The origin of the superior electrocatalytic activity toward water oxidation appears to be in the optimized interfacial matching between catalyst and electrode surface obtained through this fabrication method.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Boosting Photoelectrochemical Water Oxidation of Hematite in Acidic Electrolytes by Surface State Modification

  • Tang, PengYi|||0000-0002-2306-095X
  • Han, Li-Juan
  • Hegner, Franziska Simone
  • Paciok, Paul
  • Biset-Peiró, Martí|||0000-0002-1255-7733
  • Du, Hong-Chu
  • Wei, Xiankui|||0000-0003-4320-1120
  • Jin, Lei
  • Xie, Haibing|||0000-0002-5070-2882
  • Shi, Qin
  • Andreu, Teresa|||0000-0002-2804-4545
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • López, Núria|||0000-0001-9150-5941
  • Galán-Mascarós, José Ramón|||0000-0001-7983-9762
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
State-of-the-art water-oxidation catalysts (WOCs) in acidic electrolytes usually contain expensive noble metals such as ruthenium and iridium. However, they too expensive to be implemented broadly in semiconductor photoanodes for photoelectrochemical (PEC) water splitting devices. Here, an Earth-abundant CoFe Prussian blue analogue (CoFe-PBA) is incorporated with core-shell FeO/FeTiO type II heterojunction nanowires as composite photoanodes for PEC water splitting. Those deliver a high photocurrent of 1.25 mA cm at 1.23 V versus reversible reference electrode in acidic electrolytes (pH = 1). The enhancement arises from the synergic behavior between the successive decoration of the hematite surface with nanolayers of FeTiO and then, CoFe-PBA. The underlying physical mechanism of performance enhancement through formation of the FeO/FeTiO/CoFe-PBA heterostructure reveals that the surface states' electronic levels of hematite are modified such that an interfacial charge transfer becomes kinetically favorable. These findings open new pathways for the future design of cheap and efficient hematite-based photoanodes in acidic electrolytes.