Pasar al contenido principal

DISEÑO DE ESTRATEGIAS PARA LA PRODUCCION DE CATALIZADORES CON ENZIMAS COINMOVILIZADAS Y SU EMPLEO EN REACCIONES EN CASCADA

CTQ2017-86170-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 56
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enzyme co-immobilization: Always the biocatalyst designers' choice…or not?

  • Arana-Peña, Sara
  • Carballares, Diego
  • Morellon-Sterling, Roberto
  • Berenguer-Murcia, Ángel
  • Alcántara, Andrés R.
  • Rodrigues, Rafael C.
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
The increasing relevance of cascade reactions in biocatalysis has sparked a great interest for enzyme co-immobilization. Enzyme co-immobilization allows access to some kinetic advantages that in some instances are necessary to get the desired product, avoiding side-reactions. However, the kinetic effect is very relevant mainly at the initial reaction rates, while it may be less relevant in the whole reaction course, depending on the kinetic parameters of the involved enzymes. This review not only critically discusses the advantages but also the drawbacks of enzymes co-immobilization: immobilization on the same support and surface, under similar conditions, discarding the whole biocatalyst when one of the co-immobilized enzymes is inactivated. We will discuss when co-immobilization is almost compulsory, when the advantages of co-immobilization may not be enough to compensate their problems and when it should be fully discarded. The co-immobilization of cofactors and enzymes bears special interest, as this can open up the opportunity to the building of artificial cells and extremely complex one-pot transformations. Finally, some recent strategies to overcome some the co-immobilization problems will be presented.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Lecitase ultra: A phospholipase with great potential in biocatalysis

  • Virgen-Ortiz, Jose J.
  • Santos, Jose Cleiton S. dos
  • Ortiz, Claudia
  • Berenguer-Murcia, Ángel
  • Barbosa, Oveimar
  • Rodrigues, Rafael C.
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
Lecitase Ultra is a chimera produced by the fusion of the genes of the lipase from Thermomyces lanuginosus and the phospholipase A1 from Fusarium oxysporum. The enzyme was first designed for the enzymatic degumming of oils, as that problem was not fully resolved before. It is commercialized only as an enzyme solution by Novo Nordisk A/S. This review shows the main uses of this promising enzyme. Starting from the original degumming use, the enzyme has found applications in many other food modification applications, like production of structured phospholipids (e.g., derivatives of phosphatidylcholine), tuning the properties of flour, etc. Moreover, the enzyme has been used in fine chemistry (resolution of racemic mixtures), in the production of aromas and fragrances, polymers modification, etc. Some papers show the use of the enzyme in biodiesel production. Moreover, we present the different technologies applied to obtain a suitable immobilized biocatalyst, remarking the immobilization via interfacial activation and how heterofunctional acyl supports may solve some of the limitations. Immobilized enzyme physical and chemical modifications have also been presented. Finally, Lecitase Ultra has been one of the model enzymes in a new strategy to coimmobilize lipases and other less stable enzymes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

One Pot Use of Combilipases for Full Modification of Oils and Fats: Multifunctional and Heterogeneous Substrates

  • Arana-Peña, Sara
  • Carballares, Diego
  • Berenguer-Murcia, Ángel
  • Alcántara, Andrés R.
  • Rodrigues, Rafael C.
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
Lipases are among the most utilized enzymes in biocatalysis. In many instances, the main reason for their use is their high specificity or selectivity. However, when full modification of a multifunctional and heterogeneous substrate is pursued, enzyme selectivity and specificity become a problem. This is the case of hydrolysis of oils and fats to produce free fatty acids or their alcoholysis to produce biodiesel, which can be considered cascade reactions. In these cases, to the original heterogeneity of the substrate, the presence of intermediate products, such as diglycerides or monoglycerides, can be an additional drawback. Using these heterogeneous substrates, enzyme specificity can promote that some substrates (initial substrates or intermediate products) may not be recognized as such (in the worst case scenario they may be acting as inhibitors) by the enzyme, causing yields and reaction rates to drop. To solve this situation, a mixture of lipases with different specificity, selectivity and differently affected by the reaction conditions can offer much better results than the use of a single lipase exhibiting a very high initial activity or even the best global reaction course. This mixture of lipases from different sources has been called “combilipases” and is becoming increasingly popular. They include the use of liquid lipase formulations or immobilized lipases. In some instances, the lipases have been coimmobilized. Some discussion is offered regarding the problems that this coimmobilization may give rise to, and some strategies to solve some of these problems are proposed. The use of combilipases in the future may be extended to other processes and enzymes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Biological activities of peptides obtained by pepsin hydrolysis of fishery products

  • Castañeda-Valbuena, Daniel
  • Berenguer-Murcia, Ángel
  • Fernández Lafuente, Roberto
  • Morellon-Sterling, Roberto
  • Tacias-Pascacio, Veymar G.
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
The fishing industry generates tons of waste of great intrinsic value due to its high content of biomolecules such as proteins. The processing of proteins can result in products with high nutritional, pharmacological, and technological interest due to the peptides that can be derived from them. This review work compiles the investigations that have performed on the production of peptides from proteins of fish origin using pepsin as catalyst from the corresponding hydrolytic reaction, with special emphasis on the description of each of the reported biological properties, as well as on some uses that have been explored for these peptides. This work may be useful to promote new research involving the use of pepsin in the production of bioactive peptides from fishery products, as well as for the development of mechanisms that allow their use in different industrial processes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ficin: A protease extract with relevance in biotechnology and biocatalysis

  • Morellon-Sterling, Roberto
  • El-Siar, Hocine
  • Tavano, Olga Luisa
  • Berenguer-Murcia, Ángel
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
Due to the problems raised by the use of animal or microbial recombinant proteases, the use of proteases from vegetable origin is becoming increasingly popular.. Among them, sulfidryl proteases have a special interest. Ficin is an outstanding example of this kind of proteases. This paper aims to be to make a comprehensive review of the recent uses of this enzyme, including for example protein hydrolysis, the production of bioactive peptides and antibodies fragments (researchers point that ficin results are more reproducible than using other proteases), meat tenderization, milk coagulations in cheese making or peptide synthesis. Efforts to get industrial immobilized biocatalysts of the enzyme will be also described. The review shows the huge potential and brilliant prospect that this enzyme can have in the near future.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Novozym 435: the “perfect” lipase immobilized biocatalyst?

  • Ortiz, Claudia
  • Luján Ferreira, María
  • Barbosa, Oveimar
  • Santos, Jose Cleiton S. dos
  • Rodrigues, Rafael C.
  • Berenguer-Murcia, Ángel
  • Briand, Laura E.
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
Novozym 435 (N435) is a commercially available immobilized lipase produced by Novozymes. It is based on immobilization via interfacial activation of lipase B from Candida antarctica on a resin, Lewatit VP OC 1600. This resin is a macroporous support formed by poly(methyl methacrylate) crosslinked with divinylbenzene. N435 is perhaps the most widely used commercial biocatalyst in both academy and industry. Here, we review some of the success stories of N435 (in chemistry, energy and lipid manipulation), but we focus on some of the problems that the use of this biocatalyst may generate. Some of these problems are just based on the mechanism of immobilization (interfacial activation) that may facilitate enzyme desorption under certain conditions. Other problems are specific to the support: mechanical fragility, moderate hydrophilicity that permits the accumulation of hydrophilic compounds (e.g., water or glycerin) and the most critical one, support dissolution in some organic media. Finally, some solutions (N435 coating with silicone, enzyme physical or chemical crosslinking, and use of alternative supports) are proposed. However, the N435 history, even with these problems, may continue in the coming future due to its very good properties if some simpler alternative biocatalysts are not developed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Liquid lipase preparations designed for industrial production of biodiesel. Is it really an optimal solution?

  • Monteiro, Rodolpho R.C.
  • Arana-Peña, Sara
  • Rocha, Thays N. da
  • Miranda, Letícia P.
  • Berenguer-Murcia, Ángel
  • Tardioli, Paulo W.
  • Santos, Jose Cleiton S. dos
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
There are growing demands by the biodiesel companies to get cheap lipase formulation, preferably in liquid forms, which can give an answer to their needs. Thus, many commercial or home-produced enzymes are being used in this process in free form. Among these enzymes, Eversa is a liquid lipase formulation derived from the lipase from Thermomyces lanuginosus designed for the enzymatic biodiesel production. The potential of this promising enzyme is hereby reported. However, the specificity of lipases is a problem in biodiesel production. That way the concept of an optimal lipase for biodiesel production is not appropriate, being preferable the use of concept of combi-lipases, using Eversa as a component of the lipase mixture. The application of Eversa for the production of biodiesel through the transesterification, esterification and hydroesterification of oils and fats with different free fatty acids content is thoroughly discussed. Finally, even though Eversa was launched to be used as liquid biocatalyst in the production of biodiesel, this work will discuss how the immobilization of this enzyme through different strategies enhances its performance. That is, a properly designed immobilized Eversa biocatalyst may be more expensive, but it may have some advantages that overcome this drawback.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Phenolic compounds in mango fruit: a review

  • Tacias-Pascacio, Veymar G.
  • Castañeda-Valbuena, Daniel
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel
  • Meza-Gordillo, Rocío
  • Gutiérrez, Luis-Felipe
  • Pacheco, Neith
  • Cuevas-Bernardino, Juan C.
  • Ayora-Talavera, Teresa
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
Mangifera indica fruit (mango) is one of the most commercialized fruits around the world occupying the 2nd position as a tropical crop, due to the great variety of existing cultivars from which different food products such as drinks, juices, concentrates, and jams are prepared. The wastes generated during the processing of this fruit (20 million tons), which represent up to 60% of the weight of the fruit and consist mainly of peels (12%) and kernels seeds (20%), cause a series of environmental and economic problems for entrepreneurs in the sector. This is because there are no clear policies for its disposal and reuse. Nevertheless, the development of biotechnological tools has led to these wastes becoming subject of interest for their use in multiple industries such as food and pharmaceuticals, since it has been shown that they can be used as raw material to obtain phenolic compounds with biological activities (antioxidant, antimicrobial, anticancer, etc.). This review compiles the most relevant works from 2016 to 2021 about extraction, quantification, identification, biological activities, and applications of phenolic compounds obtained from the mango tree, with special focus on the fruit, with the objective to promote the use of mango from a sustainable perspective, and with a biorefinery approach.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Bioactive peptides from fisheries residues: A review of use of papain in proteolysis reactions

  • Tacias-Pascacio, Veymar G.
  • Castañeda-Valbuena, Daniel
  • Morellon-Sterling, Roberto
  • Tavano, Olga Luisa
  • Berenguer-Murcia, Ángel
  • Vela-Gutiérrez, Gilber
  • Rather, Irfan A.
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
Papain is a cysteine endopeptidase of vegetal origin (papaya (Carica papaya L.) with diverse applications in food technology. In this review we have focused our attention on its application in the production of bio-peptides by hydrolysis of proteins from fish residues. This way, a residual material, that can become a contaminant if dumped without control, is converted into highly interesting products. The main bioactivity of the produced peptides is their antioxidant activity, followed by their nutritional and functional activities, but peptides with many other bioactivities have been produced. Thera are also examples of production of hydrolysates with several bioactivities. The enzyme may be used alone, or in combination with other enzymes to increase the degree of hydrolysis.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Biotechnological relevance of the lipase A from Candida antarctica

  • Monteiro, Rodolpho R.C.
  • Virgen-Ortiz, Jose J.
  • Berenguer-Murcia, Ángel
  • Rocha, Thays N. da
  • Santos, Jose Cleiton S. dos
  • Alcántara, Andrés R.
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
This review intends to present some of the latest studies on the lipase A from Candida antarctica (CALA). This lipase is among the most stable ones and has some capability to attack the sn-2 position of triglycerides. This makes it a very interesting lipase, especially considering that it is commercially available. The cloning and production of the enzyme together with some structural facts and applications will be discussed in this review. Special focus will be put on the immobilization of the enzyme. The use of the commercially available crosslinked enzyme aggregates of this enzyme will be explained, together with the use of the enzyme in some new trends in enzyme immobilization, such as bio-imprinting of the open form of CALA by detergents and the fixation of the open structure, the design of heterofunctional supports able to take full advantage of the immobilization via interfacial activation but preventing enzyme release, or the design of strategies for the preparation of multiple layers of lipase enzymes (using just CALA or combining CALA with other lipases).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Immobilization of lipases on hydrophobic supports: immobilization mechanism, advantages, problems, and solutions

  • Rodrigues, Rafael C.
  • Virgen-Ortiz, Jose J.
  • Santos, Jose Cleiton S. dos
  • Berenguer-Murcia, Ángel
  • Alcántara, Andrés R.
  • Barbosa, Oveimar
  • Ortiz, Claudia
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
Lipases are the most widely used enzymes in biocatalysis, and the most utilized method for enzyme immobilization is using hydrophobic supports at low ionic strength. This method allows the one step immobilization, purification, stabilization, and hyperactivation of lipases, and that is the main cause of their popularity. This review focuses on these lipase immobilization supports. First, the advantages of these supports for lipase immobilization will be presented and the likeliest immobilization mechanism (interfacial activation on the support surface) will be revised. Then, its main shortcoming will be discussed: enzyme desorption under certain conditions (such as high temperature, presence of cosolvents or detergent molecules). Methods to overcome this problem include physical or chemical crosslinking of the immobilized enzyme molecules or using heterofunctional supports. Thus, supports containing hydrophobic acyl chain plus epoxy, glutaraldehyde, ionic, vinylsulfone or glyoxyl groups have been designed. This prevents enzyme desorption and improved enzyme stability, but it may have some limitations, that will be discussed and some additional solutions will be proposed (e.g., chemical amination of the enzyme to have a full covalent enzyme-support reaction). These immobilized lipases may be subject to unfolding and refolding strategies to reactivate inactivated enzymes. Finally, these biocatalysts have been used in new strategies for enzyme coimmobilization, where the most stable enzyme could be reutilized after desorption of the least stable one after its inactivation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Biotechnological Applications of Proteases in Food Technology

  • Tavano, Olga Luisa
  • Berenguer-Murcia, Ángel
  • Secundo, Francesco
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
This review presents some of the hottest topics in biotechnological applications: proteases in biocatalysis. Obviously, one of the most relevant areas of application is in the hydrolysis of proteins in food technology, and that has led to a massive use on proteomics. The aim is to identify via peptide maps the different proteins obtained after a specific protease hydrolysis. However, concepts like degradomics are also taking on a more relevant importance in the use and study of proteases and will also be discussed. Other protease applications, as seem in cleaning (detergent development), the pharmaceutical industry, and in fine chemistry, will be analyzed. This review progresses from basic areas such as protease classification to a discussion of the preparation of protease‐immobilized biocatalysts, considering the different problems raised by the use of immobilized proteases due to the peculiar features of the substrates, usually large macromolecules. Production of bioactive peptides via limited hydrolysis of proteins will occupy an important place in this review.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Immobilization of papain: A review

  • Tacias-Pascacio, Veymar G.
  • Morellon-Sterling, Roberto
  • Castañeda-Valbuena, Daniel
  • Berenguer-Murcia, Ángel
  • Kamli, Majid Rasool
  • Tavano, Olga Luisa
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
Papain is a cysteine protease from papaya, with many applications due to its broad specificity. This paper reviews for first time the immobilization of papain on different supports (organic, inorganic or hybrid supports) presenting some of the features of the utilized immobilization strategies (e.g., epoxide, glutaraldehyde, genipin, glyoxyl for covalent immobilization). Special focus is placed on the preparation of magnetic biocatalysts, which will permit the simple recovery of the biocatalyst even if the medium is a suspension. Problems specific to the immobilization of proteases (e.g., steric problems when hydrolyzing large proteins) are also defined. The benefits of a proper immobilization (enzyme stabilization, widening of the operation window) are discussed, together with some artifacts that may suggest an enzyme stabilization that may be unrelated to enzyme rigidification.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Stabilization of enzymes via immobilization: Multipoint covalent attachment and other stabilization strategies

  • Rodrigues, Rafael C.
  • Berenguer-Murcia, Ángel
  • Carballares, Diego
  • Morellon-Sterling, Roberto
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
The use of enzymes in industrial processes requires the improvement of their features in many instances. Enzyme immobilization, a requirement to facilitate the recovery and reuse of these water-soluble catalysts, is one of the tools that researchers may utilize to improve many of their properties. This review is focused on how enzyme immobilization may improve enzyme stability. Starting from the stabilization effects that an enzyme may experience by the mere fact of being inside a solid particle, we detail other possibilities to stabilize enzymes: generation of favorable enzyme environments, prevention of enzyme subunit dissociation in multimeric enzymes, generation of more stable enzyme conformations, or enzyme rigidification via multipoint covalent attachment. In this last point, we will discuss the features of an “ideal” immobilization protocol to maximize the intensity of the enzyme-support interactions. The most interesting active groups in the support (glutaraldehyde, epoxide, glyoxyl and vinyl sulfone) will be also presented, discussing their main properties and uses. Some instances in which the number of enzyme-support bonds is not directly related to a higher stabilization will be also presented. Finally, the possibility of coupling site-directed mutagenesis or chemical modification to get a more intense multipoint covalent immobilization will be discussed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A review on the immobilization of pepsin: A Lys-poor enzyme that is unstable at alkaline pH values

  • Morellon-Sterling, Roberto
  • Tavano, Olga Luisa
  • Bolivar, Juan M.
  • Berenguer-Murcia, Ángel
  • Vela-Gutiérrez, Gilber
  • Sabir, Jamal S.M.
  • Tacias-Pascacio, Veymar G.
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
Pepsin is a protease used in many different applications, and in many instances, it is utilized in an immobilized form to prevent contamination of the reaction product. This enzyme has two peculiarities that make its immobilization complex. The first one is related to the poor presence of primary amino groups on its surface (just one Lys and the terminal amino group). The second one is its poor stability at alkaline pH values. Both features make the immobilization of this enzyme to be considered a complicated goal, as most of the immobilization protocols utilize primary amino groups for immobilization. This review presents some of the attempts to get immobilized pepsin biocatalyst and their applications. The high density of anionic groups (Asp and Glu) make the anion exchange of the enzyme simpler, but this makes many of the strategies utilized to immobilize the enzyme (e.g., amino-glutaraldehyde supports) more related to a mixed ion exchange/hydrophobic adsorption than to real covalent immobilization. Finally, we propose some possibilities that can permit not only the covalent immobilization of this enzyme, but also their stabilization via multipoint covalent attachment.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Use of Alcalase in the production of bioactive peptides: A review

  • Tacias-Pascacio, Veymar G.
  • Morellon-Sterling, Roberto
  • Siar, El-Hocine
  • Tavano, Olga Luisa
  • Berenguer-Murcia, Ángel
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
This review aims to cover the uses of the commercially available protease Alcalase in the production of biologically active peptides since 2010. Immobilization of Alcalase has also been reviewed, as immobilization of the enzyme may improve the final reaction design enabling the use of more drastic conditions and the reuse of the biocatalyst. That way, this review presents the production, via Alcalase hydrolysis of different proteins, of peptides with antioxidant, angiotensin I–converting enzyme inhibitory, metal binding, antidiabetic, anti-inflammatory and antimicrobial activities (among other bioactivities) and peptides that improve the functional, sensory and nutritional properties of foods. Alcalase has proved to be among the most efficient proteases for this goal, using different protein sources, being especially interesting the use of the protein residues from food industry as feedstock, as this also solves nature pollution problems. Very interestingly, the bioactivities of the protein hydrolysates further improved when Alcalase is used in a combined way with other proteases both in a sequential way or in a simultaneous hydrolysis (something that could be related to the concept of combi-enzymes), as the combination of proteases with different selectivities and specificities enable the production of a larger amount of peptides and of a smaller size.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Preparation of Magnetic Cross-Linked Amyloglucosidase Aggregates: Solving Some Activity Problems

  • Amaral-Fonseca, Murilo
  • Kopp, Willian
  • Giordano, R. L. C.
  • Fernández-Lafuente, Roberto
  • Tardioli, Paulo W.
The preparation of Cross-Linked Enzyme Aggregates (CLEAs) is a simple and cost-effective technique capable of generating insoluble biocatalysts with high volumetric activity and improved stability. The standard CLEA preparation consists of the aggregation of the enzyme and its further crosslinking, usually with glutaraldehyde. However, some enzymes have too low a content of surface lysine groups to permit effective crosslinking with glutaraldehyde, requiring co-aggregation with feeders rich in amino groups to aid the formation of CLEAs. The co-aggregation with magnetic particles makes their handling easier. In this work, CLEAs of a commercial amyloglucosidase (AMG) produced by Aspergillus niger were prepared by co-aggregation in the presence of polyethyleneimine (PEI) or starch with aminated magnetic nanoparticles (MNPs) or bovine serum albumin (BSA). First, CLEAs were prepared only with MNPs at different glutaraldehyde concentrations, yielding a recovered activity of around 20%. The addition of starch during the precipitation and crosslinking steps nearly doubled the recovered activity. Similar recovered activity (around 40%) was achieved when changing starch by PEI. Moreover, under the same conditions, AMG co-aggregated with BSA was also synthesized, yielding CLEAs with very similar recovered activity. Both CLEAs (co-aggregated with MNPs or BSA) were four times more stable than the soluble enzyme. These CLEAs were evaluated in the hydrolysis of starch at typical industrial conditions, achieving more than 95% starch-to-glucose conversion, measured as Dextrose Equivalent (DE). Moreover, both CLEAS could be reused for five cycles, maintaining a DE of around 90%. Although both CLEAs had good properties, magnetic CLEAs could be more attractive for industrial purposes because of their easy separation by an external magnetic field, avoiding the formation of clusters during the filtration or centrifugation recovery methods usually used., This research was funded in part by the Conselho Nacional de Desenvolvimento Científico e Tecnológico, grant #142107/2015-8, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES), Finance Code 001, and Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP), grant #2016/10636-8. We gratefully recognize financial support from Project CTQ2017-86170-R (MINECO, Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Immobilization of Eversa Lipase on Octyl Agarose Beads and Preliminary Characterization of Stability and Activity Features

  • Arana-Peña, Sara
  • Lokha, Yuliya
  • Fernández-Lafuente, Roberto
Eversa is an enzyme recently launched by Novozymes to be used in a free form as biocatalyst in biodiesel production. This paper shows for first time the immobilization of Eversa (a commercial lipase) on octyl and aminated agarose beads and the comparison of the enzyme properties to those of the most used lipase, the isoform B from <i>Candida antarctica</i> (CALB) immobilized on octyl agarose beads. Immobilization on octyl and aminated supports of Eversa has not had a significant effect on enzyme activity versus p-nitrophenyl butyrate (pNPB) under standard conditions (pH 7), but immobilization on octyl agarose beads greatly enhanced the stability of the enzyme under all studied conditions, much more than immobilization on aminated support. Octyl-Eversa was much more stable than octyl-CALB at pH 9, but it was less stable at pH 5. In the presence of 90% acetonitrile or dioxane, octyl-Eversa maintained the activity (even increased the activity) after 45 days of incubation in a similar way to octyl-CALB, but in 90% of methanol, results are much worse, and octyl-CALB became much more stable than Eversa. Coating with PEI has not a clear effect on octyl-Eversa stability, although it affected enzyme specificity and activity response to the changes in the pH. Eversa immobilized octyl supports was more active than CALB versus triacetin or pNPB, but much less active versus methyl mandelate esters. On the other hand, Eversa specificity and response to changes in the medium were greatly modulated by the immobilization protocol or by the coating of the immobilized enzyme with PEI. Thus, Eversa may be a promising biocatalyst for many processes different to the biodiesel production and its properties may be greatly improved following a suitable immobilization protocol, and in some cases is more stable and active than CALB., We gratefully recognize the support from the MINECO from Spanish Government, (project number CTQ2017-86170-R) and Colciencias (Colombia) (project number FP 44842-076-2016)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of strategies to produce highly porous cross-linked aggregates of porcine pancreas lipase with magnetic properties

  • Guimarães, José R.
  • Giordano, Raquel de Lima Camargo
  • Fernández-Lafuente, Roberto
  • Tardioli, Paulo W.
The preparation of highly porous magnetic crosslinked aggregates (pm-CLEA) of porcine pancreas lipase (PPL) is reported. Some strategies to improve the volumetric activity of the immobilized biocatalyst were evaluated, such as treatment of PPL with enzyme surface-modifying agents (polyethyleneimine or dodecyl aldehyde), co-aggregation with protein co-feeders (bovine serum albumin and/or soy protein), use of silica magnetic nanoparticles functionalized with amino groups (SMNPs) as separation aid, and starch as pore-making agent. The combination of enzyme surface modification with dodecyl aldehyde, co-aggregation with SMNPs and soy protein, in the presence of 0.8% starch (followed by hydrolysis of the starch with α-amylase), yielded CLEAs expressing high activity (immobilization yield around 100% and recovered activity around 80%), high effectiveness factor (approximately 65% of the equivalent free enzyme activity) and high stability at 40 °C and pH 8.0, i.e., PPL CLEAs co-aggregated with SMNPs/bovine serum albumin or SMNPs/soy protein retained 80% and 50% activity after 10 h incubation, respectively, while free PPL was fully inactivated after 2 h. Besides, highly porous magnetic CLEAs co-aggregated with soy protein and magnetic nanoparticles (pm-SP-CLEAs) showed good performance and reusability in the hydrolysis of tributyrin for five 4h-batches., This work was financed by São Paulo Research Foundation (FAPESP, grant #2016/10636-8), National Council for Scientific and Technology Development (CNPq, grant #405889/2016-0), and in part by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior—Brasil (CAPES), Finance Code 001. We also gratefully recognize all support from the Project CTQ2017-86170-R (MINECO, Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Further stabilization of alcalase immobilized on glyoxyl supports: amination plus modification with glutaraldehyde

  • Hussain, Fouzia
  • Arana-Peña, Sara
  • Morellon-Sterling, Roberto
  • Barbosa, Oveimar
  • Ait Braham, Sabrina
  • Kamal, Shagufta
  • Fernández-Lafuente, Roberto
Alcalase was immobilized on glyoxyl 4% CL agarose beads. This permitted to have Alcalase preparations with 50% activity retention versus Boc-l-alanine 4-nitrophenyl ester. However, the recovered activity versus casein was under 20% at 50 °C, as it may be expected from the most likely area of the protein involved in the immobilization. The situation was different at 60 °C, where the activities of immobilized and free enzyme became similar. The chemical amination of the immobilized enzyme or the treatment of the enzyme with glutaraldehyde did not produce any significant stabilization (a factor of 2) with high costs in terms of activity. However, the modification with glutaraldehyde of the previously aminated enzyme permitted to give a jump in Alcalase stability (e.g., with most than 80% of enzyme activity retention for the modified enzyme and less than 30% for the just immobilized enzyme in stress inactivation at pH 7 or 9). This preparation could be used in the hydrolysis of casein at pH 9 even at 67 °C, retaining around 50% of the activity after 5 hydrolytic cycles when the just immobilized preparation was almost inactive after 3 cycles. The modified enzyme can be reused in hydrolysis of casein at 45 °C and pH 9 for 6 cycles (6 h) without any decrease in enzyme activity., This research has been funded by MINECO from Spanish Government, (project number CTQ2017-86170-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Preparation of Crosslinked Enzyme Aggregates of a Thermostable Cyclodextrin Glucosyltransferase from Thermoanaerobacter sp. Critical Effect of the Crosslinking Agent

  • Jimenez Rojas, Mayerlenis
  • Amaral-Fonseca, Murilo
  • Zanin, Gisella Maria
  • Fernández-Lafuente, Roberto
  • Lima Camargo Giordano, Raquel de
  • Tardioli, Paulo W.
Crosslinked enzyme aggregates (CLEAs) of a thermostable cyclodextrin glucosyltransferase (CGTase) from <i>Thermoanaerobacter</i> sp. have been prepared for the production of cyclodextrins (CDs). Different parameters in the precipitation (nature and concentration of precipitant) and crosslinking steps (time of reaction with cross-linker, nature and concentration of the crosslinker) were evaluated on the production of CLEAs of CGTase. Among the seven studied precipitants, acetone with a 75% (<i>v</i>/<i>v</i>) concentration produced the aggregates of CGTase with higher activity, which retained 97% of the initial activity. Concerning the cross-linker (glutaraldehyde, starch–aldehyde, and pectin–aldehyde), starch–aldehyde produced the most active CLEAs. The use of bovine serum albumin as co-feeder decreased the expressed activity. Addition of polyethylenimine at the end of cross-linking step prevented the leakage of the enzyme and the subsequent Schiff’s bases reduction with sodium borohydride permitted to maintain 24% of the initial activity even with the large dextrin as substrate. The optimal conditions for the immobilization process required were defined as 75% (<i>v</i>/<i>v</i>) acetone as precipitation reagent for 1 h at 20 °C, 20 mM starch–aldehyde as crosslinking reagent for 2 h at 20 °C, treatment with 1 mg/mL of polyethylenimine for 5 min, reduction with 1 mg/mL of sodium borohydride. The CLEAs of CGTase were active catalyst (similarly to the free enzyme) in the production of cyclodextrins at 50 °C and pH 6.0 for 6 h reaction, maintaining intact their structures. Besides this, after five cycles of 3 h the total cyclodextrin yield was 80% of the initial value (first batch, with around 45% CD yield)., This work was financed by National Council for Scientific and Technology Development (CNPq, grant 483947/2012-1, and doctorate fellowship of M.J.R.), and in part by the Coordenação de Aperfeiçoamento Pessoal de Nível Superior—Brazil (CAPES), Finance Code 001. We also gratefully recognize all support from the Project MINECO from Spanish Government, (project number CTQ2017-86170-R)., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advantageous Preparation of Digested Proteic Extracts from Spirulina platensis Biomass

  • Verdasco-Martín, Carlos M.
  • Echevarrieta, Lea
  • Otero Hernández, Cristina
<i>Spirulina</i> biomass has great nutritional value, but its proteins are not as well adsorbed as animal ones are. New functional food ingredients and metabolites can be obtained from spirulina, using different selective biodegradations of its biomass. Four enzyme-assisted extraction methods were independently studied, and their best operation conditions were determined. Enzymes were employed to increase the yield of easily adsorbed proteic extracts. A biomass pre-treatment using Alcalase<sup>®</sup> (pH 6.5, 1% <i>v</i>/<i>w</i>, and 30 °C) is described, which increased the extraction yield of hydrophilic biocomponents by 90% <i>w</i>/<i>w</i> compared to the simple solvent extraction. Alcalase<sup>®</sup> gives rise to 2.5–6.1 times more amino acids than the others and eight differential short peptides (438–1493 Da). These processes were scaled up and the extracts were analyzed. Higher destruction of cell integrity in the case of Alcalase<sup>®</sup> was also visualized by transmission electron microscopy. The described extractive technology uses cheap, commercial, food grade enzymes and hexane, accepted for food and drug safety. It is a promising process for a competitive biofactory, thanks to an efficient production of extracts with high applied potential in the nutrition, cosmetic, and pharmaceutical industries., This research was partially supported by the Program of I+D Activities of the Autonomous Community of Madrid, Spain: Tecnología 2013 (Project INSPIRA1-CM Ref. S2013/ABI-2783 "Aplicaciones industriales de la Espirulina" with co-financiation of the European Structural Found (European Social Found -EFS- and European Found for Regional Development- FEDER-), and by MINECO of Spanish Government (grant Ref. CTQ2017-86170-R)., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reuse of lipase from pseudomonas fluorescens via its step-by-step coimmobilization on glyoxyl-octyl agarose beads with least stable lipases

  • Rios, Nathalia S.
  • Arana-Peña, Sara
  • Mendez-Sanchez, Carmen
  • Ortiz, Claudia
  • Gonçalves, Luciana R. B.
  • Fernández-Lafuente, Roberto
Coimmobilization of lipases may be interesting in many uses, but this means that the stability of the least stable enzyme determines the stability of the full combilipase. Here, we propose a strategy that permits the reuse the most stable enzyme. Lecitase Ultra (LU) (a phospholipase) and the lipases from Rhizomucor miehei (RML) and from Pseudomonas fluorescens (PFL) were immobilized on octyl agarose, and their stabilities were studied under a broad range of conditions. Immobilized PFL was found to be the most stable enzyme under all condition ranges studied. Furthermore, in many cases it maintained full activity, while the other enzymes lost more than 50% of their initial activity. To coimmobilize these enzymes without discarding fully active PFL when LU or RML had been inactivated, PFL was covalently immobilized on glyoxyl-agarose beads. After biocatalysts reduction, the other enzyme was coimmobilized just by interfacial activation. After checking that glyoxyl-octyl-PFL was stable in 4% Triton X-100, the biocatalysts of PFL coimmobilized with LU or RML were submitted to inactivation under different conditions. Then, the inactivated least stable coimmobilized enzyme was desorbed (using 4% detergent) and a new enzyme reloading (using in some instances RML and in some others employing LU) was performed. The initial activity of immobilized PFL was maintained intact for several of these cycles. This shows the great potential of this lipase coimmobilization strategy., This research was funded by MICIU, grant number CTQ2017-86170-R and Colciencias grant number FP 44842-076-2016). N.S.R. thanks to CNPq for a predoctoral fellowship (CNPq scholarship—Brazil)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Increasing the enzyme loading capacity of porous supports by a layer-by-layer immobilization strategy using PEI as glue

  • Rios, Nathalia S.
  • Arana-Peña, Sara
  • Mendez Sanchez, Carmen
  • Lokha, Yuliya
  • Cortés Corberán, Vicente
  • Gonçalves, Luciana R. B.
  • Fernández-Lafuente, Roberto
© The Author(s)., A new strategy to increase the enzyme-loading capacity of porous supports was investigated. Lipase from Pseudomonas fluorescens (PFL) was immobilized on octyl-agarose (OA) beads and treated with polyethyleneimine (PEI). Then, PFL was immobilized on the previous PFL layer. Next, the biocatalyst was coated with PEI and a third layer of PFL was added. Sodium dodecyl sulfate polyacrylamide electrophoresis showed that the amount of PFL proportionally increased with each enzyme layer; however, the effects on biocatalyst activity were not as clear. Hydrolyzing 50 mM of triacetin at 25 °C, the activity of the three-layer biocatalyst was even lower than that of the bi-layer one; on the contrary its activity was higher when the activity was measured at 4 °C in the presence of 30% acetonitrile (that reduced the activity and thus the relevance of the substrate diffusion limitations). That is, the advantage of the multilayer formation depends on the specific activity of the enzyme and on the diffusion limitations of the substrate. When octyl agarose (OA)-PFL-PEI-PFL preparation was treated with glutaraldehyde, the activity was reduced, although the enzyme stability increased and the immobilization of the last PFL layer offered results similar to the one obtained using the three-layer preparation without glutaraldehyde modification (90%)., This research was funded by MICIU grant number CTQ2017-86170-R (Spain). N. S. R. thanks to CNPq for a predoctoral fellowship (CNPq scholarship–Brazil)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dextran aldehyde in biocatalysis: more than a mere immobilization system

  • Tacias-Pascacio, Veymar G.
  • Ortiz, Claudia
  • Rueda, Nazzoly
  • Berenguer Murcia, A.
  • Acosta, Niuris
  • Aranaz, Inmaculada
  • Civera, Concepción
  • Fernández-Lafuente, Roberto
  • Alcántara, Andrés R.
© The Author(s)., Dextran aldehyde (dexOx), resulting from the periodate oxidative cleavage of 1,2-diol moiety inside dextran, is a polymer that is very useful in many areas, including as a macromolecular carrier for drug delivery and other biomedical applications. In particular, it has been widely used for chemical engineering of enzymes, with the aim of designing better biocatalysts that possess improved catalytic properties, making them more stable and/or active for different catalytic reactions. This polymer possesses a very flexible hydrophilic structure, which becomes inert after chemical reduction; therefore, dexOx comes to be highly versatile in a biocatalyst design. This paper presents an overview of the multiple applications of dexOx in applied biocatalysis, e.g., to modulate the adsorption of biomolecules on carrier surfaces in affinity chromatography and biosensors design, to serve as a spacer arm between a ligand and the support in biomacromolecule immobilization procedures or to generate artificial microenvironments around the enzyme molecules or to stabilize multimeric enzymes by intersubunit crosslinking, among many other applications., This research was funded by the Ministry of Science, Innovation and Universities from Spanish Government (project numbers MAT2015-65184-C2-1_R and CTQ2017-86170-R) and Colciencias (Colombia) (project number FP 44842-076-2016)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combi-CLEAs of glucose oxidase and catalase for conversion of glucose to gluconic acid eliminating the hydrogen peroxide to maintain enzyme activity in a bubble column reactor

  • Oliveira Mafra, Agnes Cristina
  • Gazzotto Ulrich, Letícia
  • Kornecki, Jakub F.
  • Fernández-Lafuente, Roberto
  • Tardioli, Paulo W.
  • Perencin de Arruda Ribeiro, Marcelo
© The Author(s)., In this study combined cross-linked aggregates of catalase from bovine liver and glucose-oxidase from Aspergillus niger were prepared, and the effects of the precipitant and crosslinking agents, as well as the use of bovine serum albumin (BSA) as a feeder protein, on enzyme immobilization yield and thermal stability of both enzymes, were evaluated. Combi- crosslinking of enzyme aggregates (CLEAs) prepared using dimethoxyethane as precipitant, 25 mM glutaraldehyde and BSA/enzymes mass ratio of 5.45 (w/w), exhibited the highest enzyme activities and stabilities at 40 °C, pH 6.0, and 250 rpm for 5 h. The stability of both immobilized enzymes was fairly similar, eliminating one of the problems of enzyme coimmobilization. Combi-CLEAs were used in gluconic acid (GA) production in a bubble column reactor operated at 40 °C, pH 6.0 and 10 vvm of aeration, using 26 g L−1 glucose as the substrate. Results showed conversion of around 96% and a reaction course very similar to the same process using free enzymes. The operational half-life was 34 h, determined from kinetic profiles and the first order inactivation model. Combi-CLEAs of glucose-oxidase and catalase were shown to be a robust biocatalyst for applications in the production of gluconic acid from glucose., This work was supported by the National Council for Scientific and Technological Development (CNPq) (grants #141647/2013-2 and #402850/2013-0), and in part by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior–Brazil (CAPES)–Finance Code 001, and by the Comunidad Autónoma de Madrid (project Ref. IND2017/IND-7640) and MINECO from Spanish Government, (project number CTQ2017-86170-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación

Genipin as an emergent tool in the design of biocatalysts: mechanism of reaction and applications

  • Tacias-Pascacio, Veymar G.
  • García-Parra, Esmeralda
  • Vela-Gutiérrez, Gilber
  • Virgen-Ortiz, Jose J.
  • Berenguer-Murcia, Ángel
  • Alcántara, Andrés R.
  • Fernández-Lafuente, Roberto
Genipin is a reagent isolated from the Gardenia jasminoides fruit extract, and whose low toxicity and good crosslinking properties have converted it into a reactive whose popularity is increasing by the day. These properties have made it widely used in many medical applications, mainly in the production of chitosan materials (crosslinked by this reactive), biological scaffolds for tissue engineering, and nanoparticles of chitosan and nanogels of proteins for controlled drug delivery, the genipin crosslinking being a key point to strengthen the stability of these materials. This review is focused on the mechanism of reaction of this reagent and its use in the design of biocatalysts, where genipin plays a double role, as a support activating agent and as inter- or intramolecular crosslinker. Its low toxicity makes this compound an ideal alterative to glutaraldehyde in these processes. Moreover, in some cases the features of the biocatalysts prepared using genipin surpassed those of the biocatalysts prepared using other standard crosslinkers, even disregarding toxicity. In this way, genipin is a very promising reagent in the design of biocatalysts., A.B.-M. thanks MICIU (RTI2018-095291-B-I00, MINECO/FEDER) and the Generalitat Valenciana (PROMETEOII/2018/076) for financial support, and R.F.-L. gratefully recognizes the support from MICIU from Spanish Government (project number CTQ2017-86170-R). J.J.V.-O. thanks to CONACYT (Mexico) for the financial support to the basic science project number, CB-2016-01, 286992., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable Enzymatic Synthesis of a Solketal Ester—Process Optimization and Evaluation of Its Antimicrobial Activity

  • Mendoza-Ortiz, Patricia A.
  • Gama, Rafaela S.
  • Gómez, Omar C.
  • Luiz, Jaine H. H.
  • Fernández-Lafuente, Roberto
  • Cren, Erika C.
  • Mendes, Adriano A.
© 2020 by the authors., The present study aims the enzymatic synthesis of solketal palmitate by esterification between solketal and palmitic acid using heptane as solvent. Lipases from Thermomyces lanuginosus (TLL), Candida rugosa type VII (CRL), and Pseudomonas fluorescens (PFL) were immobilized via interfacial activation on rice husk silica functionalized with triethoxy(octyl)silane (Octyl–SiO2) and used as biocatalysts. A loading of 20–22 mg of lipase/g of support was immobilized independently of the studied enzyme. TLL–Octyl–SiO2 was the most active biocatalyst in oil hydrolysis (656.0 ± 23.9 U/g) and ester synthesis (productivity of 6.8 mmol/min.gbiocat), and it has been chosen for further ester synthesis optimization. The effect of some important parameters such as biocatalyst concentration, reaction temperature and acid:alcohol molar ratio on the reaction has been evaluated using a central composite rotatable design at fixed mechanical stirring (240 rpm) and reaction time (15 min). Subsequently, the effect of reactants concentration and molecular sieve concentration has also been examined. Under optimal conditions (56 °C, acid:alcohol molar ratio of 1:3 with a palmitic acid concentration of 1 M, and 20% wt. of TLL–Octyl–SiO2 per volume of reaction mixture), 83% acid conversion was obtained after 150 min of reaction. The biocatalyst retained 87% of its initial activity after seven successive reaction batches. The product was identified by nuclear magnetic resonance analysis. Antimicrobial activity studies showed that the synthesized ester demonstrated antifungal activity against Candida albicans and Candida parapsilosis, with minimum inhibitory concentration (MIC) between 200 and 400 µg/mL, and bacteriostatic/fungistatic action—minimum microbicial concentration (MMC) > 400 µg/mL., This research was funded by Fundação de Amparo à Pesquisa do Estado de Minas Gerais (FAPEMIG), grant number APQ–02196–15; Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq), grant number 404929/2016–8; and Spanish Ministerio de Ciencia e Innovación, grant number CTQ2017-86170-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improving the Yields and Reaction Rate in the Ethanolysis of Soybean Oil by Using Mixtures of Lipase CLEAs

  • Díaz Ramos, Margarita
  • Passos Miranda, Letícia
  • Fernández-Lafuente, Roberto
  • Kopp, William
  • Tardioli, Paulo Waldir
[EN] Due to the heterogeneity of oils, the use of mixtures of lipases with di erent activity for a large number of glycerol-linked carboxylic acids that compose the substrate has been proposed as a better alternative than the use of one specific lipase preparation in the enzymatic synthesis of biodiesel. In this work, mixtures of lipases from di erent sources were evaluated in their soluble form in the ethanolysis of soybean oil. A mixture of lipases (50% of each lipase, in activity basis) from porcine pancreas (PPL) and Thermomyces lanuginosus lipase (TLL) gave the highest fatty acid ethyl ester (FAEE) yield (around 20 wt.%), while the individual lipases gave FAEE yields 100 and 5 times lower, respectively. These lipases were immobilized individually by the cross-linked enzyme aggregates (CLEAs) technique, yielding biocatalysts with 89 and 119% of expressed activity, respectively. A mixture of these CLEAs (also 50% of each lipase, in activity basis) gave 90.4 wt.% FAEE yield, while using separately CLEAs of PPL and TLL, the FAEE yields were 84.7 and 75.6 wt.%, respectively, under the same reaction conditions. The mixture of CLEAs could be reused (five cycles of 6 h) in the ethanolysis of soybean oil in a vortex flow-type reactor yielding an FAEE yield higher than 80% of that of the first batch., This work was supported by the São Paulo Research Foundation (FAPESP) (grant numbers #2011/23194-0 and #2016/10636-8), Conselho Nacional Desenvolvimento Científico e Tecnológico (CNPq, grant numbers #405889/2016-0, #308212/2017-7), in part by Coordenação de Aperfeiçoamento de Pessoal de Nível Superior—Brasil (CAPES)—Finance Code 001, and the MICIU of Spanish Government (project CTQ2017-86170-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Immobilization of pectinase on chitosan-magnetic particles: Influence of particle preparation protocol on enzyme properties for fruit juice clarification

  • Dal-Magro,Lucas
  • Silva de Moura, Kelly
  • Backes, Betina Elys
  • de-Menezes,Eliana Weber
  • Benvenutti, Edilson Valmir
  • Nicolodi, Sabrina
  • Klein, Manuela P.
  • Fernández-Lafuente, Roberto
  • Rodrigues, Rafael C.
[EN] Magnetic-chitosan particles were prepared following three different protocols enabling the preparation of particles with different sizes – nano (Nano-CMag, Micro (Micro-CMag) and Macro (Macro-CMag) – and used for pectinase immobilization and clarification of grape, apple and orange juices. The particle size had a great effect in the kinetic parameters, Nano-CMag biocatalyst presented the highest V value (78.95 mg. min), followed by Micro-CMag and Macro-CMag, with V of 57.20 mg.min and 46.03 mg.min, respectively. However, the highest thermal stability was achieved using Macro-CMag, that was 8 and 3-times more stable than Nano-CMag and Micro-CMag biocatalysts, respectively. Pectinase immobilized on Macro-CMag kept 85% of its initial activity after 25 batch cycles in orange juice clarification. These results suggested that the chitosan magnetic biocatalysts presented great potential application as clarifying catalysts for the fruit juice industry and the great importance of the chitosan particles preparation on the final biocatalyst properties., This work was supported by grants and scholarships (L Dal Magro) from Capes, CNPq (process 403505/2013-5) and FAPERGS (process 17/2551-0000939-8). We gratefully recognize the support from the MINECO from Spanish Government, (project number CTQ2017-86170-R) The authors wish to thank Mr. Ramiro Martínez (Novozymes, Spain), Amazon group and LNF Latinoamericana for kindly supplying the enzymes used in this research, as well as Vitivinicola Jolimont (Canela, Brazil) for providing the grape juice.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Glyoxyl-Activated Agarose as Support for Covalently Link Novo-Pro D: Biocatalysts Performance in the Hydrolysis of Casein

  • Antunes Lopes, Laiane
  • Kern Novelli, Paula
  • Fernández-Lafuente, Roberto
  • Waldir Tardioli, Paulo
  • Camargo Giordano, Raquel Lima
© 2020 by the authors., This study aimed to evaluate the performance of a commercial protease (Novo-Pro D (NPD)), both in soluble and immobilized forms, in the hydrolysis of proteins (using casein as model protein). Immobilization of the protease NPD on 6% agarose activated with glyoxyl groups for 24 h at 20 °C and pH 10.0 allowed preparing immobilized biocatalyst with around 90% immobilization yield, 92% recovered activity versus small substrate, and a thermal stability 5.3-fold higher than the dialyzed soluble enzyme at 50 °C and pH 8.0. Immobilization times longer than 24 h lead to a decrease in the recovered activity and did not improve the biocatalyst stability. At 50 °C and pH 6.5, the immobilized NPD was around 20-fold more stable than the dialyzed soluble protease. Versus casein, the immobilized NDP presented a 10% level of activity, but it allowed hydrolyzing casein (26 g/L) at 50 °C and pH 6.5 up to a 40% degree of hydrolysis (DH) after 2 h reaction, while under the same conditions, only a 34% DH was achieved with soluble NPD. In addition, the immobilized NPD showed good reusability, maintaining the DH of casein for at least ten 2h-reaction batches., This research was funded by National Council for Scientific and Technology Development (CNPq), grant numbers 141487/2016-0, 422131/2016-4; Coordenação de Aperfeiçoamento de Pessoal de Nível Superior – Brazil (CAPES), Finance Code 001 and Spanish Ministerio de Ciencia e Innovación, grant number CTQ2017-86170-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of gold electronic state on the catalytic performance of nano gold catalysts in n-Octanol Oxidation

  • Pakrieva, Ekaterina
  • Kolobova, Ekaterina
  • Kotolevich, Yulia
  • Pascual, Laura
  • Carabineiro, Sónia. A.C.
  • Kharlanov, Andrey N.
  • Pichugina, Daria
  • Nikitina, Nadezhda
  • German, Dmitrii
  • Zepeda, Trino A.
  • Tiznado Vazquez, Hugo J.
  • Farías, Mario H.
  • Bogdanchikova, Nina
  • Cortés Corberán, Vicente
  • Pestryakov, Alexey
This study aims to identify the role of the various electronic states of gold in the catalytic behavior of Au/MxOy/TiO2 (where MxOy are Fe2O3 or MgO) for the liquid phase oxidation of n-octanol, under mild conditions. For this purpose, Au/MxOy/TiO2 catalysts were prepared by deposition-precipitation with urea, varying the gold content (0.5 or 4 wt.%) and pretreatment conditions (H2 or O2), and characterized by low temperature nitrogen adsorption-desorption, X-ray powder diffraction (XRD), energy dispersive spectroscopy (EDX), scanning transmission electron microscopy-high angle annular dark field (STEM HAADF), diffuse reflectance Fourier transform infrared (DRIFT) spectroscopy of CO adsorption, temperature-programmable desorption (TPD) of ammonia and carbon dioxide, and X-ray photoelectron spectroscopy (XPS). Three states of gold were identified on the surface of the catalysts, Au0, Au1+ and Au3+, and their ratio determined the catalysts performance. Based on a comparison of catalytic and spectroscopic results, it may be concluded that Au+ was the active site state, while Au0 had negative effect, due to a partial blocking of Au0 by solvent. Au3+ also inhibited the oxidation process, due to the strong adsorption of the solvent and/or water formed during the reaction. Density functional theory (DFT) simulations confirmed these suggestions. The dependence of selectivity on the ratio of Brønsted acid centers to Brønsted basic centers was revealed., This work was partially supported by the Associate Laboratory for Green Chemistry—LAQV, and financed by national funds from FCT/MCTES (UIDB/50006/2020)(Portugal), Tomsk Polytechnic University Competitiveness Enhancement Program, project VIU-RSCBMT-65/2019 and Russian Foundation of Basic Research, project 18-29-24037 (Russia), and MINECO project CTQ2017-86170-R (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

One Pot Use of Combilipases for Full Modification of Oils and Fats: Multifunctional and Heterogeneous Substrates

  • Arana-Peña, Sara
  • Carballares, Diego
  • Berenguer Murcia, A.
  • Alcántara, Andrés R.
  • Rodrigues, Rafael C.
  • Fernández-Lafuente, Roberto
© 2020 by the authors., Lipases are among the most utilized enzymes in biocatalysis. In many instances, the main reason for their use is their high specificity or selectivity. However, when full modification of a multifunctional and heterogeneous substrate is pursued, enzyme selectivity and specificity become a problem. This is the case of hydrolysis of oils and fats to produce free fatty acids or their alcoholysis to produce biodiesel, which can be considered cascade reactions. In these cases, to the original heterogeneity of the substrate, the presence of intermediate products, such as diglycerides or monoglycerides, can be an additional drawback. Using these heterogeneous substrates, enzyme specificity can promote that some substrates (initial substrates or intermediate products) may not be recognized as such (in the worst case scenario they may be acting as inhibitors) by the enzyme, causing yields and reaction rates to drop. To solve this situation, a mixture of lipases with different specificity, selectivity and differently affected by the reaction conditions can offer much better results than the use of a single lipase exhibiting a very high initial activity or even the best global reaction course. This mixture of lipases from different sources has been called “combilipases” and is becoming increasingly popular. They include the use of liquid lipase formulations or immobilized lipases. In some instances, the lipases have been coimmobilized. Some discussion is offered regarding the problems that this coimmobilization may give rise to, and some strategies to solve some of these problems are proposed. The use of combilipases in the future may be extended to other processes and enzymes., This research was funded by Ministerio de Ciencia e Innovación-Spanish Government (project number CTQ2017-86170-R) and Generalitat Valenciana (PROMETEO/2018/076)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Composites of Crosslinked Aggregates of Eversa® Transform and Magnetic Nanoparticles. Performance in the Ethanolysis of Soybean Oil

  • Passos Miranda, Letícia
  • Guimarães, José R.
  • Campos Giordano, Roberto
  • Fernández-Lafuente, Roberto
  • Tardioli, Paulo W.
© 2020 by the authors., Eversa® Transform 2.0 has been launched to be used in free form, but its immobilization may improve its performance. This work aimed to optimize the immobilization of Eversa® Transform 2.0 by the crosslinked enzyme aggregates (CLEAs) technique, using almost all the available tools to improve its performance. Several variables in the CLEA preparation were optimized to improve the recovered activity, such as precipitant nature and crosslinker concentration. Moreover, some feeders were co-precipitated to improve the crosslinking step, such as bovine serum albumin, soy protein, or polyethyleneimine. Starch (later enzymatically degraded) was utilized as a porogenic agent to decrease the substrate diffusion limitations. Silica magnetic nanoparticles were also utilized to simplify the CLEA handling, but it was found that a large percentage of the Eversa activity could be immobilized on these nanoparticles before aggregation. The best CLEA protocol gave a 98.9% immobilization yield and 30.1% recovered activity, exhibited a porous structure, and an excellent performance in the transesterification of soybean oil with ethanol: 89.8 wt% of fatty acid ethyl esters (FAEEs) yield after 12 h of reaction, while the free enzyme required a 48 h reaction to give the same yield. A caustic polishing step of the product yielded a biodiesel containing 98.9 wt% of FAEEs and a free fatty acids content lower than 0.25%, thus the final product met the international standards for biodiesel. The immobilized biocatalyst could be reused for at least five 12 h-batches maintaining 89.6% of the first-batch yield, showing the efficient catalyst recovery by applying an external magnetic field., This research was funded by the São Paulo Research Foundation (FAPESP, grant number 2016/10636-8), in part by Coordenação de Aperfeiçoamento de Pessoal de Nível Superior–Brasil (CAPES)–Finance Code 001, Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq, project numbers 405889/2016-0 and 308212/2017-7), and Ministerio de Ciencia e Innovación-Spanish Government (project number CTQ2017-86170-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enzyme-Coated Micro-Crystals: An Almost Forgotten but Very Simple and Elegant Immobilization Strategy

  • Monteiro, Rodolpho R. C.
  • Santos, José C. S. dos
  • Alcántara, Andrés R.
  • Fernández-Lafuente, Roberto
© 2020 by the authors., The immobilization of enzymes using protein coated micro-crystals (PCMCs) was reported for the first time in 2001 by Kreiner and coworkers. The strategy is very simple. First, an enzyme solution must be prepared in a concentrated solution of one compound (salt, sugar, amino acid) very soluble in water and poorly soluble in a water-soluble solvent. Then, the enzyme solution is added dropwise to the water soluble solvent under rapid stirring. The components accompanying the enzyme are called the crystal growing agents, the solvent being the dehydrating agent. This strategy permits the rapid dehydration of the enzyme solution drops, resulting in a crystallization of the crystal formation agent, and the enzyme is deposited on this crystal surface. The reaction medium where these biocatalysts can be used is marked by the solubility of the PCMC components, and usually these biocatalysts may be employed in water soluble organic solvents with a maximum of 20% water. The evolution of these PCMC was to chemically crosslink them and further improve their stabilities. Moreover, the PCMC strategy has been used to coimmobilize enzymes or enzymes and cofactors. The immobilization may permit the use of buffers as crystal growth agents, enabling control of the reaction pH in the enzyme environments. Usually, the PCMC biocatalysts are very stable and more active than other biocatalysts of the same enzyme. However, this simple (at least at laboratory scale) immobilization strategy is underutilized even when the publications using it systematically presented a better performance of them in organic solvents than that of many other immobilized biocatalysts. In fact, many possibilities and studies using this technique are lacking. This review tried to outline the possibilities of this useful immobilization strategy., Fundação Cearense de Apoio ao Desenvolvimento Científico e Tecnológico (FUNCAP, project number BP3-0139-00005.01.00/18), Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq, project numbers 422942/2016-2 and 311062/2019-9), and Spanish Ministerio de Ciencia e Innovación, grant number CTQ2017-86170-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemoenzymatic Synthesis of the New 3-((2,3-Diacetoxypropanoyl)oxy)propane-1,2-diyl Diacetate Using Immobilized Lipase B from Candida antarctica and Pyridinium Chlorochromate as an Oxidizing Agent

  • Plata, Esteban
  • Ruiz, Mónica
  • Ruiz, Jennifer
  • Ortiz, Claudia
  • Castillo, John J.
  • Fernández-Lafuente, Roberto
© 2020 by the authors., To exploit the hydrolytic activity and high selectivity of immobilized lipase B from Candida antarctica on octyl agarose (CALB-OC) in the hydrolysis of triacetin and also to produce new value-added compounds from glycerol, this work describes a chemoenzymatic methodology for the synthesis of the new dimeric glycerol ester 3-((2,3-diacetoxypropanoyl)oxy)propane-1,2-diyl diacetate. According to this approach, triacetin was regioselectively hydrolyzed to 1,2-diacetin with CALB-OC. The diglyceride product was subsequently oxidized with pyridinium chlorochromate (PCC) and a dimeric ester was isolated as the only product. It was found that the medium acidity during the PCC treatment and a high 1,2-diacetin concentration favored the formation of the ester. The synthesized compounds were characterized using IR, MS, HR-MS, and NMR techniques. The obtained dimeric ester was evaluated at 100 ppm against seven bacterial strains and two Candida species to identify its antimicrobial activity. The compound has no inhibitory activity against the bacterial strains used but decreased C. albicans and C. parapsilosis growth by 49% and 68%, respectively. Hemolytic activity was evaluated, and the results obtained support the use of the dimeric ester to control C. albicans and C. parapsilosis growth in non-intravenous applications because the compound shows hemolytic activity., This research was funded by Colciencias, project number FP 44842-076-2016, and Universidad Industrial de Santander (Vicerrectoría de Investigación y Extension, project number 8854) and Spanish Ministerio de Ciencia e Innovación, grant number CTQ2017-86170-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modulating the properties of the lipase from Thermomyces lanuginosus immobilized on octyl agarose beads by altering the immobilization conditions

  • Lokha, Yuliya
  • Arana-Peña, Sara
  • Rios, Nathalia S.
  • Mendez-Sanchez, Carmen
  • Gonçalves, Luciana R. B.
  • López-Gallego, Fernando
  • Fernández-Lafuente, Roberto
The lipase from Thermomyces lanuginosus (TLL) has been immobilized on octyl-agarose beads via interfacial activation under 16 different conditions (changing the immobilization pH, the ionic strength, the presence of additives like calcium, phosphate or glycerol) and using a low loading (1 mg/g support). Then, the properties of the different biocatalysts have been evaluated: stability at pH 7.0 and 70 °C and activity versus p-nitro phenyl propionate, triacetin and R- and S- methyl mandelate. Results clearly indicate that the immobilization conditions determine the final enzyme properties, altering enzyme stability (by 10 folds), activity (by 8 folds using R- methyl mandelate) and specificity (VR/VS changed from 0.7 to 2.3 using mandelate esters). For instance, the enzymes immobilized at pH 7.0 using 5 mM buffer were the most stable preparations, while the presence of 250 mM sodium phosphate greatly decreased the final enzyme stability. The biocatalyst stability of TLL increased with increasing NaCl in the immobilization buffer at pH 5. Fluorescence studies confirmed that the conformation of the different immobilized enzymes were different, despite being a physical and reversible immobilization method. Thus, the immobilization of TLL on octyl agarose beads under different conditions produced biocatalysts with different properties, the optimal condition depends on the studied reaction and condition., We gratefully recognize the support from the MICIU from Spanish Government, (project number CTQ2017-86170-R). FLG thanks ARAID for granting his permanent position at the University of Zaragoza. NSR thanks to CNPq for a predoctoral fellowship (CNPq scholarship – Brazil)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Beneficial effects of Spirulina Aqueous extract on vasodilator function of arteries from hypertensive rats

  • Villalpando, D. M.
  • Verdasco-Martín, Carlos M.
  • Plaza, Ignacio
  • Gómez-Rivas, Juan
  • de Bethencourt, Fermín R.
  • Villarroel, Morris
  • García, José Luis
  • Otero Hernández, Cristina
  • Ferrer Parra, Mercedes
9 p.-7 fig., Hypertension is a multifactorial disorder considered one of the major causes of premature death worldwide. This pathology is associated with vascular functional/structural alterations in which nitric oxide (NO) and oxygen reactive species participate. On the other hand, the use of microalgae extracts in the treatment of cardiovascular diseases is increasing. Based on the antioxidant and antihypertensive properties of Spirulina, this study aims to investigate the effect of an aqueous extract of Spirulina on the vasodilator function of the aorta from spontaneously hypertensive rats (SHR), analyzing the functional role of NO. For this, aortic segments from male SHR were divided into two groups, one control and the other exposed to an Spirulina aqueous extract (0.1% w/v, for 3 hours), to analyze (i) the production of NO, superoxide anion, and hydrogen peroxide; (ii) the vasodilator response induced by acetylcholine (ACh), by the NO donor and sodium nitroprusside (SNP), and by the KATP channel opener and pinacidil; and (iii) the expression of the p-Akt, p-eNOS, and HO-1 proteins. The results showed that the aqueous Spirulina extract (i) increased the production of NO, did not significantly modify that of superoxide, while decreased that of hydrogen peroxide; (ii) increased the vasodilatory responses induced by ACh, NPS, and pinacidil; and (iii) increased the expression of p-Akt and HO-1. These results suggest that incubation with the aqueous Spirulina extract improves the vascular function of arteries from SHR by increasing the release/bioavailability/function of NO. Increased KATP channel activation and expression of pAkt and HO-1 appear to be participating in these actions., This study was supported by grants from Comunidad de Madrid (S2013/ABI-2783, “INSPIRΑ1-CM”) and Fondo Europeo de Desarrollo Regional to JLG, CO, and MF; the Spanish Ministerio de Economía, Industria y Competitividad (CTQ2017-86170-R) to CO; and by the Fondo de Investigaciones Sanitarias (PI19/01282) to MF., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Immobilization of Eversa® Transform via CLEA Technology Converts It in a Suitable Biocatalyst for Biolubricant Production Using Waste Cooking Oil

  • Guimarães, José R.
  • Passos Miranda, Letícia
  • Fernández-Lafuente, Roberto
  • Tardioli, Paulo Waldir
The performance of the previously optimized magnetic cross-linked enzyme aggregate of Eversa (Eversa-mCLEA) in the enzymatic synthesis of biolubricants by transesterification of waste cooking oil (WCO) with different alcohols has been evaluated. Eversa-mCLEA showed good activities using these alcohols, reaching a transesterification activity with isoamyl alcohol around 10-fold higher than with methanol. Yields of isoamyl fatty acid ester synthesis were similar using WCO or refined oil, confirming that this biocatalyst could be utilized to transform this residue into a valuable product. The effects of WCO/isoamyl alcohol molar ratio and enzyme load on the synthesis of biolubricant were also investigated. A maximum yield of around 90 wt.% was reached after 72 h of reaction using an enzyme load of 12 esterification units/g oil and a WCO/alcohol molar ratio of 1:6 in a solvent-free system. At the same conditions, the liquid Eversa yielded a maximum ester yield of only 34%. This study demonstrated the great changes in the enzyme properties that can be derived from a proper immobilization system. Moreover, it also shows the potential of WCO as a feedstock for the production of isoamyl fatty acid esters, which are potential candidates as biolubricants., This research was funded by the São Paulo Research Foundation (FAPESP, grant number 2016/10636-8), in part by Coordenação de Aperfeiçoamento de Pessoal de Nível Superior–Brasil (CAPES)–Finance Code 001, Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq, project numbers 405889/2016-0 and 308212/2017-7), and Ministerio de Ciencia e Innovación-Spanish Government (project number CTQ2017-86170-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxidation of 5-Hydroxymethylfurfural on Supported Ag, Au, Pd and Bimetallic Pd-Au Catalysts: Effect of the Support

  • German, Dmitrii
  • Pakrieva, Ekaterina
  • Kolobova, Ekaterina
  • Carabineiro, Sónia. A.C.
  • Stucchi, Marta
  • Villa, Alberto
  • Prati, Laura
  • Bogdanchikova, Nina
  • Cortés Corberán, Vicente
  • Pestryakov, Alexey
Oxidation of 5-hydroxymethylfurfural (HMF), a major feedstock derived from waste/fresh biomass, into 2,5-furandicarboxylic acid (FDCA) is an important transformation for the production of biodegradable plastics. Herein, we investigated the effect of the support (unmodified and modified titania, commercial alumina, and untreated and treated Sibunit carbon) of mono- and bimetallic catalysts based on noble metals (Ag, Au, Pd) on selective HMF oxidation with molecular oxygen to FDCA under mild and basic reaction conditions. The higher selectivity to FDCA was obtained when metals were supported on Sibunit carbon (Cp). The order of noble metal in terms of catalyst selectivity was: Ag < Au < Pd < PdAu. Finally, FDCA production on the most efficient PdAu NPs catalysts supported on Sibunit depended on the treatment applied to this carbon support in the order: PdAu/Cp < PdAu/Cp-HNO<sub>3</sub> < PdAu/Cp-NH<sub>4</sub>OH. These bimetallic catalysts were characterized by nitrogen adsorption-desorption, inductively coupled plasma atomic emission spectroscopy, high resolution transmission electron microscopy, energy dispersive spectroscopy, X-ray diffraction, Hammet indicator method and X-ray photoelectron spectroscopy. The functionalization of Sibunit surface by HNO<sub>3</sub> and NH<sub>4</sub>OH led to a change in the contribution of the active states of Pd and Au due to promotion effect of N-doping and, as a consequence, to higher FDCA production. HMF oxidation catalyzed by bimetallic catalysts is a structure sensitive reaction., This work was partially supported by Fundação para a Ciência e Tecnologia (FCT), Portugal, through project UIDB/00100/2020 of the Centro de Quimica Estrutural, Associate Laboratory for Green Chemistry—LAQV, financed by national funds from FCT/MCTES (UIDB/50006/2020), FCT Scientific Employment Stimulus- Institutional Call (CEECINST/00102/2018) and PTDC/QEQ-QIN/3967/2014, Tomsk Polytechnic University Competitiveness Enhancement Program project VIU-RSCBMT-197/2020, Russian Foundation of Basic Research, project 18-29-24037, Tomsk Polytechnic University State Task ‘Science’ (project FSWW-2020-0011) and MICINN project CTQ2017-86170-R (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novozym 435: The "perfect" lipase immobilized biocatalyst?

  • Ortiz, Claudia
  • Ferreira, María Luján
  • Barbosa, Oveimar
  • Dos Santos, José C. S.
  • Rodrigues, Rafael C.
  • Berenguer-Murcia, Ángel
  • Briand, Laura E.
  • Fernández-Lafuente, Roberto
Novozym 435 (N435) is a commercially available immobilized lipase produced by Novozymes. It is based on immobilization via interfacial activation of lipase B from Candida antarctica on a resin, Lewatit VP OC 1600. This resin is a macroporous support formed by poly(methyl methacrylate) crosslinked with divinylbenzene. N435 is perhaps the most widely used commercial biocatalyst in both academy and industry. Here, we review some of the success stories of N435 (in chemistry, energy and lipid manipulation), but we focus on some of the problems that the use of this biocatalyst may generate. Some of these problems are just based on the mechanism of immobilization (interfacial activation) that may facilitate enzyme desorption under certain conditions. Other problems are specific to the support: Mechanical fragility, moderate hydrophilicity that permits the accumulation of hydrophilic compounds (e.g., water or glycerin) and the most critical one, support dissolution in some organic media. Finally, some solutions (N435 coating with silicone, enzyme physical or chemical crosslinking, and use of alternative supports) are proposed. However, the N435 history, even with these problems, may continue in the coming future due to its very good properties if some simpler alternative biocatalysts are not developed., We gratefully recognize the financial support from MINECO from the Spanish Government (project number CTQ2017-86170-R, Colciencias, Ministerio de Educación Nacional, Ministerio de Industria, Comercio y Turismo e ICETEX, Convocatoria Ecosistema Científico – Colombia Científica. Fondo Francisco José de Caldas, Contrato RC-FP44842-212-2018 and Colciencias (Colombia) (project number FP44842-076-2016), Generalitat Valenciana (PROMETEO/2018/076), FAPERGS (project number 17/2551-0000939-8), CONICET (R. Argentina), FUNCAP (project number BP3-0139-00005.01.00/18) and ANPCyT (PICT 2015-0932 and PICT CABBIO 4687)., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of amine length in the interference of the multipoint covalent immobilization of enzymes on glyoxyl agarose beads

  • Morellon-Sterling, Roberto
  • Siar, El-Hocine
  • Ait Braham, Sabrina
  • Andrades, Diandra de
  • Pedroche, Justo
  • Millán-Linares, María del Carmen
  • Fernández-Lafuente, Roberto
1 Tabla.-- 17 Figuras, Trypsin, chymotrypsin, penicillin G acylase and ficin extract have been stabilized by immobilization on glyoxyl agarose, adding different aliphatic compounds bearing a primary amine group during the immobilization: ethyl amine, butyl amine, hexyl amine (at concentrations ranging from 0 to 20 mM) and octyl amine (from 0 to 10 mM) to analyze their effects on the immobilized enzyme stability. As expected, the presence of amines reduced the intensity of the enzyme-support multipoint covalent attachment, and therefore the enzyme stability. However, it is clear that this effect is higher using octyl amine for all enzymes (in some cases the enzyme immobilized in the presence of 10 mM octyl amine was almost inactivated while the reference kept over 50 % of the initial activity). This way, it seems that the most important effect of the presence of aminated compounds came from the generation of steric hindrances to the enzyme/support multi-reaction promoted by the ammines that are interacting with the aldehyde groups. In some instances, just 1 mM of aminated compounds is enough to greatly decrease enzyme stability. The results suggested that, if the composition of the enzyme extract is unknown, to eliminate small aminated compounds may be necessary to maximize the enzyme-support reaction., We gratefully recognize the financial support from Ministerio de Ciencia e Innovación-Spanish Government (project number CTQ2017-86170-R). RMS thank to Ministerio de Educacion -Spanish Government for a FPU fellowship, SAB and EHS thank Algerian Ministry of higher education and scientific research for their fellowships. The help and suggestions from Dr. Ángel Berenguer (Departamento de Química Inorgánica, Universidad de Alicante) are gratefully recognized., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Tris Buffer in the Intensity of the Multipoint Covalent Immobilization of Enzymes in Glyoxyl-Agarose Beads

  • Ait Braham, Sabrina
  • Morellon-Sterling, Roberto
  • Andrades, Diandra de
  • Rodrigues, Rafael C.
  • Siar, El-Hocine
  • Aksas, Ali
  • Pedroche, Justo
  • Millán-Linares, María del Carmen
  • Fernández-Lafuente, Roberto
5 Figuras.-- 1 Tabla, Tris is an extensively used buffer that presents a primary amine group on its structure. In the present work trypsin, chymotrypsin and penicillin G acylase (PGA) were immobilized/stabilized on glyoxyl agarose in presence of different concentrations of Tris (from 0 to 20 mM). The effects of the presence of Tris during immobilization were studied analyzing the thermal stability of the obtained immobilized biocatalysts. The results indicate a reduction of the enzyme stability when immobilized in the presence of Tris. This effect can be observed in inactivations carried out at pH 5, 7, and 9 with all the enzymes assayed. The reduction of enzyme stability increased with the Tris concentration. Another interesting result is that the stability reduction was more noticeable for immobilized PGA than in the other immobilized enzymes, the biocatalysts prepared in presence of 20 mM Tris lost totally the activity at pH 7 just after 1 h of inactivation, while the reference at this time still kept around 61 % of the residual activity. These differences are most likely due to the homogeneous distribution of the Lys groups in PGA compared to trypsin and chymotrypsin (where almost 50% of Lys group are in a small percentage of the protein surface). The results suggest that Tris could be affecting the multipoint covalent immobilization in two different ways, on one hand, reducing the number of available glyoxyl groups of the support during immobilization, and on the other hand, generating some steric hindrances that difficult the formation of covalent bonds., The research has been supported by Ministerio de Ciencia e Innovación-Spanish Government (project number CTQ2017-86170-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Parameters necessary to define an immobilized enzyme preparation

  • Boudrant, J. Joseph
  • Woodley, John M.
  • Fernández-Lafuente, Roberto
Biocatalytic processes continue to find increasing application in industry. Therefore enzyme immobilization has also become of increasing importance as a means of allowing enzyme containment within reactors operating in continuous mode or else separation of enzyme after use in (fed-)batch reactors, as well as potential recycle. Whilst much has been reported in the scientific literature about enzyme immobilization methods, in many cases the protocol leads to losses in enzyme activity. In this review we outline the reasons for loss of activity during immobilization and highlight suitable diagnostic tests to elucidate the precise cause and thereby methods to restore activity. The need for standardized reporting of immobilization methods is also emphasized as a means of benchmarking alternative approaches. © 2019 Elsevier Ltd, This research was funded by MICIU, grant number CTQ2017-86170-R., Supplementary data, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effects of Enzyme Loading and Immobilization Conditions on the Catalytic Features of Lipase From Pseudomonas fluorescens Immobilized on Octyl-Agarose Beads

  • Arana-Peña, Sara
  • Rios, Nathalia S.
  • Carballares, Diego
  • Mendez-Sanchez, Carmen
  • Lokha, Yuliya
  • Gonçalves, Luciana R. B.
  • Fernández-Lafuente, Roberto
The lipase from Pseudomonas fluorescens (PFL) has been immobilized on octyl-agarose beads under 16 different conditions (varying pH, ionic strength, buffer, adding some additives) at two different loadings, 1 and 60 mg of enzyme/g of support with the objective of check if this can alter the biocatalyst features. The activity of the biocatalysts versus p-nitrophenyl butyrate and triacetin and their thermal stability were studied. The different immobilization conditions produced biocatalysts with very different features. Considering the extreme cases, using 1 mg/g preparations, PFL stability changed more than fourfolds, while their activities versus pNPB or triacetin varied a 50–60%. Curiously, PFL specific activity versus triacetin was higher using highly enzyme loaded biocatalysts than using lowly loaded biocatalysts (even by a twofold factor). Moreover, stability of the highly loaded preparations was higher than that of the lowly loaded preparations, in many instances even when using 5°C higher temperatures (e.g., immobilized in the presence of calcium, the highly loaded biocatalysts maintained after 24 h at 75°c a 85% of the initial activity, while the lowly loaded preparation maintained only 27% at 70°C). Using the highly loaded preparations, activity of the different biocatalysts versus pNPB varied almost 1.7-folds and versus triacetin 1.9-folds. In this instance, the changes in stability caused by the immobilization conditions were much more significant, some preparations were almost fully inactivated under conditions where the most stable one maintained more than 80% of the initial activity. Results suggested that immobilization conditions greatly affected the properties of the immobilized PFL, partially by individual molecule different conformation (observed using lowly loaded preparations) but much more relevantly using highly loaded preparations, very likely by altering some enzyme-enzyme intermolecular interactions. There is not an optimal biocatalyst considering all parameters. That way, preparation of biocatalysts using this support may be a powerful tool to tune enzyme features, if carefully controlled. © Copyright © 2020 Arana-Peña, Rios, Carballares, Mendez-Sanchez, Lokha, Gonçalves and Fernandez-Lafuente., We gratefully recognize the support from the MICIU from Spanish Government (project number CTQ2017-86170-R). NR thanks to CNPq for a predoctoral fellowship (CNPq scholarship – Brazil) and to Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (PNPD/CAPES) for a postdoctoral fellowship. DC gratefully thanks for a predoctotal FPI fellowship to Ministerio de Ciencia, Innovacion y Universidades, Spain., Supplementary data; The Supplementary Material for this article can be found online at: https://www.frontiersin.org/articles/10.3389/fbioe.2020.00036/full#supplementary-material, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advantages of Supports Activated with Divinyl Sulfone in Enzyme Coimmobilization: Possibility of Multipoint Covalent Immobilization of the Most Stable Enzyme and Immobilization via Ion Exchange of the Least Stable Enzyme

  • Morellon-Sterling, Roberto
  • Carballares, Diego
  • Arana-Peña, Sara
  • Siar, El-Hocine
  • Braham, Sabrina A.
  • Fernández-Lafuente, Roberto
Vinyl sulfone (VS)-agarose beads were used to develop a new strategy to coimmobilize enzymes with very different stabilities, enabling the reuse of the most stable immobilized enzyme. Two model combi-biocatalysts were prepared. First, trypsin and chymotrypsin were multipoint covalently coimmobilized on VS-agarose, the support was blocked with ethylenediamine, and then β-galactosidase from Aspergillus oryzae was coimmobilized via anion exchange. Both immobilized proteases were more stable than the immobilized lactase, which could be released from the triple combi-biocatalyst by incubation in 400 mM ammonium sulfate at pH 7.0. Four cycles of combi-biocatalyst incubation at high temperature, β-galactosidase partial inactivation, and release and reimmobilization of the β-galactosidase in the combi-protease biocatalysts were performed, maintaining 80% of the activity of immobilized trypsin and 90% of immobilized chymotrypsin. The second model system was the coimmobilization of trypsin and ficin. Ficin was inactivated when immobilized on VS-agarose supports, but it could be immobilized on this support blocked with aspartic acid. Trypsin was covalently immobilized on the support blocked with aspartic acid and ficin was coimmobilized via cation exchange. As the covalently immobilized enzyme was more stable than ionically exchanged ficin, the combi-biocatalyst was submitted to four cycles as described above with similar results. © 2021 American Chemical Society., We gratefully recognize the financial support from Ministerio de Ciencia e Innovación, Spanish Government (project number CTQ2017-86170-R). R.M.S. thanks the Ministerio de Educacion, Spanish Government, for a FPU fellowship. D.C. thanks the Ministerio de Ciencia e Innovación, Spanish Government, by a FPI. S.A.B. and E.H.S. thank the Algerian scientific Ministry of higher education esearch for their fellowships. Help and suggestions from Dr. Ángel Berenguer (Departamento de Química Inorgánica, Universidad de Alicante) are gratefully recognized., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Immobilization of lipases via interfacial activation on hydrophobic supports: Production of biocatalysts libraries by altering the immobilization conditions

  • Arana-Peña, Sara
  • Rios, Nathalia S.
  • Carballares, Diego
  • Gonçalves, Luciana R. B.
  • Fernández-Lafuente, Roberto
Lipases A and B from Candida antarctica (CALA, CALB), and those from Candida rugosa (CRL) and Rhizomucor miehei (RML) have been immobilized on octyl agarose beads under 16 different conditions. The activities of the biocatalysts versus different substrates were analyzed, as well as their thermal stabilities at pH 7.0. All CALB and CRL preparations showed very similar properties, except the CRL biocatalysts prepared at pH 9. Under these conditions the free enzyme was partially inactivated. Immobilized CALA showed some significant differences in activity depending on the immobilization conditions when using esters of mandelic acid as substrates (the activities of the different preparations differed by more than a 2-fold factor), while when using the other substrates the differences were minimal. However, immobilized RML enzyme greatly alters its activity depending on the immobilization conditions, reaching differences up to 4–5 fold in both activity and stability. It is remarkable that the effect of one immobilization variable depends on the substrates, and that there are strong interactions between the different immobilization variables. Thus, this immobilization method was very robust (producing almost identical functional biocatalysts independently from the immobilization conditions) using CRL or CALB, while the immobilization conditions must be carefully controlled using RML to have reproducible results. © 2020 Elsevier B.V., We gratefully recognize the support from the MICINN from Spanish Government, (project number CTQ2017-86170-R). NSR thanks to CNPq for a predoctoral fellowship (CNPq scholarship– Brazil) and to Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (PNPD/ CAPES) for a postdoctoral fellowship. DC gratefully thanks for a pre doctotal FPI fellowship to MICINN, Spain. Mr Martinez (Novozymes Spain) is gratefully recognized by the donation of the enzymes., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stabilization of enzymes via immobilization: Multipoint covalent attachment and other stabilization strategies

  • Rodrigues, Rafael C.
  • Berenguer-Murcia, Ángel
  • Carballares, Diego
  • Morellon-Sterling, Roberto
  • Fernández-Lafuente, Roberto
The use of enzymes in industrial processes requires the improvement of their features in many instances. Enzyme immobilization, a requirement to facilitate the recovery and reuse of these water-soluble catalysts, is one of the tools that researchers may utilize to improve many of their properties. This review is focused on how enzyme immobilization may improve enzyme stability. Starting from the stabilization effects that an enzyme may experience by the mere fact of being inside a solid particle, we detail other possibilities to stabilize enzymes: generation of favorable enzyme environments, prevention of enzyme subunit dissociation in multimeric enzymes, generation of more stable enzyme conformations, or enzyme rigidification via multipoint covalent attachment. In this last point, we will discuss the features of an “ideal” immobilization protocol to maximize the intensity of the enzyme-support interactions. The most interesting active groups in the support (glutaraldehyde, epoxide, glyoxyl and vinyl sulfone) will be also presented, discussing their main properties and uses. Some instances in which the number of enzyme-support bonds is not directly related to a higher stabilization will be also presented. Finally, the possibility of coupling site-directed mutagenesis or chemical modification to get a more intense multipoint covalent immobilization will be discussed. © 2021 The Author(s), We gratefully recognize the financial support from Ministerio de Ciencia e Innovación-Spanish Government (project number CTQ2017-86170-R) and CSIC for the project AEP045. Diego Carballares thanks a FPI fellowship to Ministerio de Ciencia e Innovación, Roberto Morellon-Sterling recognizes a FPU to Ministerio de educación., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparison of acid, basic and enzymatic catalysis on the production of biodiesel after RSM optimization

  • Tacias-Pascacio, Veymar G.
  • Torrestiana-Sánchez, Beatriz
  • Dal Magro, Lucas
  • Virgen-Ortíz, Jose J.
  • Suárez-Ruíz, Francisco J.
  • Rodrigues, Rafael C.
  • Fernández-Lafuente, Roberto
This paper shows the direct comparison of 4 different catalysts (homogenous alkaline (KOH), heterogeneous alkaline (CaO), homogenous acid (H2SO4) and a new biocatalyst (lipase from Thermomyces lanuginosus (TLL) immobilized on octadecyl methacylate)) in the production of biodiesel from cooking oils. The reactions for each catalyst were optimized using response surface statistical methodology, considering as main parameters: substrates molar ratio, percentage of catalyst and reaction time, whereas for enzymatic catalysis instead reaction time, we studied water concentration. Alkaline homogenous catalysis was found to be the most effective, as expected from literature. However, for first time, the new biocatalyst from TLL is just around one order of magnitude under the homogenous catalysis in reaction rate and surpassed the heterogeneous catalysis or the acid catalysis (similar yields in 2 h versus the 1 h of the alkaline catalyst). Moreover, the reaction product using the biocatalytic approach was much cleaner and less energy demanding than the other catalytic approaches. From our view, this is the first report where biocatalysis is close to conventional catalysis in the production of biodiesel., We gratefully recognize the support from the MINECO from Spanish Government, (project number CTQ2017-86170-R). The predoctoral fellowship for Miss Tacias-Pascacio (CONACyT, Mexico) is also gratefully recognized. Miss Tacias-Pascacio also thanks to Dr. Celina Lujan for her support in laboratory analyses. The authors wish to thank Mr. Ramiro Martínez (Novozymes, Spain) for kindly supplying the enzymes used in this research and Purolite for the kind donation of the supports. The advice and support of Dr. A. Basso and Dr. S. Serban (Purolite) are also gratefully recognized. The help from Dr Miguel Ángel García Alvarado (Instituto Tecnológico de Veracruz) and Dr. Ángel Berenguer-Murcia (Instituto de Materiales, Universidad de Alicante) is gratefully thanked., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New applications of glyoxyl-octyl agarose in lipases co-immobilization: Strategies to reuse the most stable lipase

  • Arana-Peña, Sara
  • Mendez-Sanchez, Carmen
  • Rios, Nathalia S.
  • Ortiz, Claudia
  • Gonçalves, Luciana R. B.
  • Fernández-Lafuente, Roberto
Lipase B from Candida antarctica (CALB), lipase from Rhizomucor miehei (RML) and phospholipase Lecitase Ultra (LEU) were immobilized via interfacial activation and their stabilities were compared. Immobilized CALB was much more stable than immobilized RML or LEU. That meant that, if they were coimmobilized, after the inactivation of the least stable lipases, CALB should be discarded even though it may maintain full activity. This could be solved by sequential coimmobilization on octyl-glyoxyl (OCGLX). First, CALB was immobilized on OCGLX getting some covalent bonds between most of the CALB molecules and the support. Then, after reduction of CALB immobilized on OCGLX, RML or LEU can be immobilized on the support via interfacial activation. These enzymes could be released from the support just by using detergents, without affecting CALB activity. After optimization of the lipase desorption conditions, the bi-combilipases CALB/RML and CALB/LEU or the triple-combilipase CALB/RML/LEU could be submitted to several cycles of immobilized biocatalyst inactivation, desorption and enzyme reloading keeping the activity of the immobilized CALB almost intact. This way, by using OCGLX and a stepwise immobilization protocol, discarding all coimmobilized lipases when one becomes inactivated is no longer required. Thus, the most stable ones can be reused in several cycles. © 2019 Elsevier B.V., We gratefully recognize the support from the MINECO from Spanish Government, (project number CTQ2017-86170-R) and Colciencias (Colombia) (project number FP 44842-076-2016). Nathalia S. Rios thanks to CNPq for a predoctoral fellowship (CNPq scholarship – Brazil). Mr. Martinez (Novozymes Spain) is gratefully recognized by the donation of the enzymes. The help and suggestions from Dr. Ángel Berenguer (Departamento de Química Inorgánica, Universidad de Alicante) are gratefully recognized., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Is enzyme immobilization a mature discipline? Some critical considerations to capitalize on the benefits of immobilization

  • Bolivar, Juan M.
  • Woodley, John M.
  • Fernández-Lafuente, Roberto
Enzyme immobilization has been developing since the 1960s and although many industrial biocatalytic processes use the technology to improve enzyme performance, still today we are far from full exploitation of the field. One clear reason is that many evaluate immobilization based on only a few experiments that are not always well-designed. In contrast to many other reviews on the subject, here we highlight the pitfalls of using incorrectly designed immobilization protocols and explain why in many cases sub-optimal results are obtained. We also describe solutions to overcome these challenges and come to the conclusion that recent developments in material science, bioprocess engineering and protein science continue to open new opportunities for the future. In this way, enzyme immobilization, far from being a mature discipline, remains as a subject of high interest and where intense research is still necessary to take full advantage of the possibilities. © 2022 The Royal Society of Chemistry., We gratefully recognize the financial support from Ministerio de Ciencia e Innovación-Spanish Government (project number CTQ2017-86170-R). This work is also part of a project at DTU (JMW) that has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (Grant agreement No. 101021024). JMB acknowledges funding from the Government of Community of Madrid (2018-T1/BIO-10200) and from UCM-Santander (PR108/20)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spirulina extract improves age-induced vascular dysfunction

  • Majewski, M.
  • Klett-Mingo, M.
  • Verdasco-Martín, Carlos M.
  • Otero Hernández, Cristina
  • Ferrer, Mercedes
Context: Vascular dysfunction is considered a hallmark of ageing that has been associated with altered vasomotor responses, in which nitric oxide (NO) and reactive oxygen species participate. The consumption of Spirulina extracts, with antioxidant properties, increased recently. Objective: This study investigates the effect of Spirulina aqueous extract (SAE) on the vascular function of the aorta from aged rats. Materials and methods: Aortic segments from aged male Sprague-Dawley rats (20–22 months old) were exposed to SAE (0.1% w/v, for 3 h) to analyse: (i) the vasodilator response induced by acetylcholine (ACh), by the NO donor sodium nitroprusside (SNP), by the carbon monoxide releasing molecule (CORM) and by the KATP channel opener, cromakalim (CK); (ii) the vasoconstrictor response induced by KCl and noradrenaline (NA); (iii) the production of NO and superoxide anion, and (iv) the expression of the p-eNOS and HO-1 proteins. Results: Incubation with SAE increased the expression of p-eNOS (1.6-fold) and HO-1 (2.0-fold), enhanced NO release (1.4-fold in basal and 1.9-fold in ACh-stimulated conditions) while decreased the production of superoxide (0.7-fold). SAE also increased the sensitivity (measured as pEC50) to ACh (control: −7.06 ± 0.11; SAE: −8.16 ± 0.21), SNP (control: −7.96 ± 0.16; SAE: −9.11 ± 0.14) and CK (control: −7.05 ± 0.39; SAE: −8.29 ± 0.53), and potentiated the response to KCl (1.3-fold) and to NA (1.7-fold). Conclusion: The antioxidant properties of SAE improved the vasomotor responses of aorta from aged rats. These results may support the use of Spirulina as a protection against vascular dysfunction. © 2022 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group., This study was supported by grants from Comunidad de Madrid (S2013/ABI-2783, ‘INSPIRΑ1-CM’) and Fondo Europeo de Desarrollo Regional to C. O. and M. F., the Spanish Ministerio de Ciencia e Innovación (CTQ2017-86170-R) to C. O. and by the Fondo de Investigaciones Sanitarias del Instituto de Salud Carlos III (PI19/01282) to M. F., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selective synthesis of partial glycerides of conjugated linoleic acids via modulation of the catalytic properties of lipases by immobilization on different supports

  • Verdasco-Martín, Carlos M.
  • García-Verdugo, Eduardo
  • Porcar, Raúl
  • Fernández-Lafuente, Roberto
  • Otero Hernández, Cristina
Lipases B from Candida antarctica (CALB), Rhizomucor miehei (RML) and Thermomyces lanuginosus (TLL) were immobilized on octadecyl methacylate (OM) or octadecyl methacrylate (OMC) beads. Their specific activity and regioselectivity were studied in the synthesis of conjugated linoleic acid (CLA) partial glycerides, which presented nutraceutical properties. TLL derivatives were poor catalysts. Novozym® 435 was much better than Lipozyme® RM IM. RML activity (a GRAS enzyme) was modulated via immobilization. After only 3 h, OM−RML gave the highest CLA conversion (54% at 40 °C with 1:3 M ratio of glycerol to CLA). OM-RML reduced by a factor of 3.12 and 1.16 the activation energy of the reaction with Lipozyme® RM IM and Novozym® 435, respectively. The new GRAS preparation OM-RML brings forth an optimal regioselective preparation of sn-1 mono and sn-1,3 diacylglycerols rich in CLA, with a ratio of sn-1,3/sn-1,2 regioisomers of 21.8, compared to 2.3 for Novozym® 435. © 2017 Elsevier Ltd, This work was partially supported by the Program of I+D Activities of the Autonomous Community of Madrid, Spain: Tecnología 2013 (Project INSPIRA1-CM Ref. S2013/ABI-2783 “Aplicaciones industriales de la Espirulina”., and co-financed by the European Structural Found (European Social Found -EFS- and European Found for Regional Development-FEDER-). We recognize the support from the MINECO of Spanish Government, CTQ2013-41507-R and CTQ2017-86170-R. The authors wish to thank Mr. Ramiro Martínez (Novozymes, Spain) for kindly supplying the enzymes used in this research. The help and suggestions made by Dr. Ángel Berenguer (Instituto de Materiales, Universidad de Alicante) and Dr Malcolm Yates (ICP-CSIC) are gratefully recognized., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rapid and high yield production of phospholipids enriched in CLA via acidolysis: The critical role of the enzyme immobilization protocol

  • Verdasco-Martín, Carlos M.
  • Corchado-Lopo, Carlos
  • Fernández-Lafuente, Roberto
  • Otero Hernández, Cristina
Phospholipids (PL) rich in conjugated linolenic acid (CLA) have important health effects. Yields of phosphatidylcholine (PC) acidolysis with CLA use to be limited to <30%, due to competitive side-hydrolysis. Duolite A658–Lecitase is a very suitable biocatalyst for this reaction. In this study, PC hydrolysis has been practically eliminated using extremely dried lyophilized PC (279 ± 4 mg water/Kg PC), obtaining close to 100% molar yield of modified PC (72.3% CLA) with Duolite-Lecitase in 24 h, the highest yield reported in the literature for this reaction. It has been better improved by changing the immobilization support, using three food grade hydrophobic supports (Styrene, and two Octadecyl methacrylates (OM and OMC)). In only 2 h, with a 1/12 PC/CLA molar ratio at 50 °C, similar almost quantitative yields of PC with 74.4% CLA content has been obtained using OM-Lecitase. The fatty acid composition of modified PCs is not affected by the enzyme immobilization protocol. © 2019 Elsevier Ltd, This work was partially supported by the Program of I + D Activities of the Autonomous Community of Madrid, Spain: Tecnología 2013 (Project INSPIRA1-CM Ref. S2013/ABI-2783 “Aplicaciones industriales de la Espirulina”., and co-financed by the European Structural Found (European Social Found -EFS- and European Found for Regional Development- FEDER-). We recognize the support from the MINECO of Spanish Government, CTQ2017-86170-R. The authors wish to thank Mr. Ramiro Martínez (Novozymes, Spain) for kindly supplying the enzymes used in this research and Dr Alessandra Basso (Purolite) and Dow Chemical Company by the kind donation of the supports. The English supervision from Dr. Ángel Berenguer (Departamento de Química Inorgánica, Universidad de Alicante) is gratefully recognized., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enzymatic Hydroesterification of Soybean Oil Deodorizer Distillate: Sustainable Synthesis of Ethyl and Xylose Fatty Acid Esters

  • Vieira, Ana Carolina
  • Guimarães, José R.
  • Cansian, Ana Barbara Moulin
  • Gonçalves, Maria Carolina Pereira
  • Fernández-Lafuente, Roberto
  • Vieira, Angelica Marquettotti Salcedo
  • Tardioli, Paulo W.
This article belongs to the Special Issue Bioprocesses for Biomass Valorization in Biorefineries., The enzymatic production of fatty acid ethyl esters (FAEEs) and xylose fatty acid esters (XFAEs) from soybean oil deodorizer distillate (SODD) was investigated using a hydroesterification strategy. SODD was enzymatically hydrolyzed, and the glycerol-free fraction was esterified with either xylose or ethanol. Free lipase from Pseudomonas fluorescens (PFL) yielded 84 wt% of free fatty acids (FFAs) production (with approximately 15% FFAs remaining as glycerides) after 48 h, using a SODD-to-water mass ratio of 1:4 and an enzyme loading of 5 wt% (based on oil mass). In the synthesis of FAEEs, free Eversa Transform converted approximately 82% of the FFAs into FAEEs after 48 h, using an ethanol-to-FFA molar ratio of 3.64:1 and an enzyme loading of 8.36% (w/v). For the synthesis of XFAEs, commercially immobilized lipases from Thermomyces lanuginosus (TLL-T2-150) and Pseudomonas fluorescens (IMMAPF-T2-150) were employed. These commercial lipase preparations are available in their immobilized form on Immobead T2-150. TLL-T2-150 resulted in a lower degree of xylose ester formation (80.20%) compared to IMMAPF-T2-150 (89.20%) after 24 h, using an FFA-to-xylose molar ratio of 5 in ethyl-methyl-ketone (xylose concentration of 7 mmol L−1) and an enzyme loading of 0.5% (w/v). However, TLL-T2-150 consumed more FFAs, suggesting a higher degree of xylose esterification. The final reaction mixture containing XFAEs obtained with this biocatalyst exhibited suitable emulsifying properties. A Life Cycle Assessment (LCA) revealed that the enzymatic hydroesterification process offers a sustainable route for FAEEs and XFAEs production, with configurations using free PFL in hydrolysis and IMMAPF-T2-150 in esterification showing the lowest environmental impacts due to higher catalytic efficiency. The findings point to a clear environmental edge in using SODD for ester production, offering a cleaner alternative to standard methods and making better use of a renewable resource., This work was funded by the São Paulo Research Foundation (FAPESP) [grant number 2016/10636-8], partially supported by the “Coordenação de Aperfeiçoamento de Pessoal de Nível Superior” (CAPES) [Finance Code 001], the “Conselho Nacional de Desenvolvimento Científico e Tecnológico” (CNPq) [grant number 315092/2020-3), the Spanish “Ministerio de Ciencia e Innovación” [grant number CTQ2017-86170-R], and the “Consejo Superior de Investigaciones Científicas” (CSIC) [grant number AEP045]., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

A review on the immobilization of pepsin: A Lys-poor enzyme that is unstable at alkaline pH values

  • Morellon-Sterling, Roberto
  • Tavano, Olga
  • Bolívar Bolívar, Juan Manuel
  • Berenguer-Murcia, Ángel
  • Vela-Gutiérrez, Gilber
  • Sabir, Jamal
  • Tacias-Pascacio, Veymar
  • Fernandez-Lafuente, Roberto
Pepsin is a protease used in many different applications, and in many instances, it is utilized in an immobilized form to prevent contamination of the reaction product. This enzyme has two peculiarities that make its immobilization complex. The first one is related to the poor presence of primary amino groups on its surface (just one Lys and the terminal amino group). The second one is its poor stability at alkaline pH values. Both features make the immobilization of this enzyme to be considered a complicated goal, as most of the immobilization protocols utilize primary amino groups for immobilization. This review presents some of the attempts to get immobilized pepsin biocatalyst and their applications. The high density of anionic groups (Asp and Glu) make the anion exchange of the enzyme simpler, but this makes many of the strategies utilized to immobilize the enzyme (e.g., amino-glutaraldehyde supports) more related to a mixed ion exchange/hydrophobic adsorption than to real covalent immobilization. Finally, we propose some possibilities that can permit not only the covalent immobilization of this enzyme, but also their stabilization via multipoint covalent attachment.