Pasar al contenido principal

APROVECHAMIENTO MAS EFICIENTE DE BIOMASA LIGNOCELULOSICA PARA LA OBTENCION DE MATERIALES CARBONOSOS DE ALTAS PRESTACIONES Y PRODUCTOS QUIMICOS

RTI2018-095291-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 58
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

H2 Production from Formic Acid Using Highly Stable Carbon-Supported Pd-Based Catalysts Derived from Soft-Biomass Residues: Effect of Heat Treatment and Functionalization of the Carbon Support

  • Chaparro-Garnica, Jessica
  • Navlani-García, Miriam
  • Salinas-Torres, David
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Chaparro-Garnica, Jessica|||/items/ef0cb7bf-ab19-4397-9276-686b1829395e
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
The production of hydrogen from liquid organic hydrogen carrier molecules stands up as a promising option over the conventional hydrogen storage methods. In this study, we explore the potential of formic acid as a convenient hydrogen carrier. For that, soft-biomass-derived carbon-supported Pd catalysts were synthesized by a H3PO4-assisted hydrothermal carbonization method. To assess the impact of the properties of the support in the catalytic performance towards the dehydrogenation of formic acid, three different strategies were employed: (i) incorporation of nitrogen functional groups; (ii) modification of the surface chemistry by performing a thermal treatment at high temperatures (i.e., 900 °C); and (iii) combination on both thermal treatment and nitrogen functionalization. It was observed that the modification of the carbon support with these strategies resulted in catalysts with enhanced performance and outstanding stability even after six consecutive reaction cycles, thus highlighting the important effect of tailoring the properties of the support.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

P-functionalized carbon nanotubes promote highly stable electrocatalysts based on Fe-phthalocyanines for oxygen reduction: Experimental and computational studies

  • Martínez-Sánchez, Beatriz
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Iron(II) phthalocyanines (FePc) supported on functionalized nanostructured carbon materials have been studied as electrocatalysts for the oxygen reduction reaction (ORR) in an alkaline medium. Herein, two types of carbon nanotubes (CNTs) have been explored as support, Single-Walled Carbon Nanotubes and Herringbone Carbon Nanotubes (SWCNTs and hCNTs, respectively), both electrochemically modified with ortho- aminophenylphosphonic acid (2APPA), which provides phosphate axial coordinating ligands for the immobilization of FePc molecules. All the catalysts were prepared via a facile incipient wetness impregnation method. Comprehensive experimental analysis together with density functional theory (DFT) calculations has demonstrated both the importance of the five-coordinated Fe macrocycles that favor the interaction between the FePc and the carbon support, as well as the effect of the CNT structure in the ORR. FePc axial coordination provides a better dispersion, leading to higher stability and a favorable electron redistribution that also tunes the ORR performance by lowering the stability of the reaction intermediates. Interestingly, such improvement occurs with a very low content of metal (∼1 wt% Fe), which is especially remarkable when hCNT support is employed. This work provides a novel strategy for the development of Fe-containing complexes as precious metal-free catalysts towards the ORR.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Hydrolytic Dehydrogenation of Ammonia Borane Attained by Ru-Based Catalysts: An Auspicious Option to Produce Hydrogen from a Solid Hydrogen Carrier Molecule

  • Navlani-García, Miriam
  • Salinas-Torres, David
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
Chemical hydrogen storage stands as a promising option to conventional storage methods. There are numerous hydrogen carrier molecules that afford satisfactory hydrogen capacity. Among them, ammonia borane has attracted great interest due to its high hydrogen capacity. Great efforts have been devoted to design and develop suitable catalysts to boost the production of hydrogen from ammonia borane, which is preferably attained by Ru catalysts. The present review summarizes some of the recent Ru-based heterogeneous catalysts applied in the hydrolytic dehydrogenation of ammonia borane, paying particular attention to those supported on carbon materials and oxides.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Metal-free heteroatom-doped carbon-based catalysts for ORR. A critical assessment about the role of heteroatoms

  • Quílez-Bermejo, Javier
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Metal-free carbon-based catalysts have gained much attention during last years because of their interesting properties towards oxygen reduction reaction. Intrinsic parameters of carbon materials such as porosity, structural order, conductivity and defects have proved to have a strong influence in the catalytic activity of these materials. However, the highest differences in catalytic activity are obtained via doping with heteroatoms, being nitrogen the most remarkable in terms of activity and selectivity. One of the most challenging goals of the scientific community is to unravel the role of the functional groups in order to design an optimized material. However, the complexity of isolating one specific functionality, the difficult unambiguous characterization of the species and the influence of the intrinsic properties of the carbon materials, make the identification of the active sites a complex and controversial issue. This review presents a critical assessment about the role of heteroatoms on ORR from the analysis of the literature that combine both experimental work and computational modelling.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

TiO2 and TiO2-Carbon Hybrid Photocatalysts for Diuron Removal from Water

  • Amorós-Pérez, Ana
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • García-Muñoz, Patricia
  • Keller, Nicolas
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
TiO2 and TiO2-activated carbon (AC) photocatalysts have been prepared (by sol-gel synthesis), characterized, and tested in the removal of diuron from water under simulated solar light. The preparation variables of the two series of catalysts are: (i) heat-treatment temperature of bare TiO2 (350, 400, 450 and 500 °C) and (ii) activated carbon content (0.5, 1, 5, and 10 wt.%) in TiO2-AC samples heat-treated at 350 °C. The activated carbon was previously prepared by hydrothermal carbonization of saccharose and has spherical shape. The heat-treatment temperature does not determine the efficiency of TiO2 for diuron photocatalytic degradation but clearly influences the diuron adsorption capacity. The capacity of TiO2-AC samples for diuron removal increases with the carbon content and it is the result of combined diuron adsorption and photodegradation. Thus, the sample with highest carbon content (10 wt.% nominal) leads to the highest diuron removal. The TiO2-AC photocatalysts have proved to be capable of degrading diuron previously adsorbed in dark conditions, which allows their regeneration.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Direct cost-efficient hydrothermal conversion of Amazonian lignocellulosic biomass residue

  • Azar, Fatima Zahra
  • El Kasmi, Achraf
  • Cruz Jr., Orlando F.
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
The transformation of non-edible lignocellulosic biomass into high added-value chemicals and biofuels associated with lower energy process requirements is a promising strategy for meeting the actual demands of clean energy. Here, we report the study of the non-catalytic conversion of biomass wastes issued from two Amazonian abundant fruits (cupuaçu shell and assai stone) into liquid valuable chemicals. The parent biomass samples were first comprehensively characterized using TG, XRD, and FTIR; then, they were pretreated by ball milling and by chemical processing in ionic liquid, and finally, they were hydrothermally treated to be converted into chemical products benefiting from their hemicellulose and cellulose contents. The results revealed the importance of the pretreatments in the conversion rate, while the selectivity into main chemical products (such glucose, HFM, furfural, xylose) is not affected by the pretreatments neither physical nor chemical ones. The conversion of both biomasses and their products’ distribution were comprehensively discussed, with the highest conversion obtained using assai stone biomass (90%). This study could pave the way for investigating the non-catalytic route of biomass conversion, as a lesser energy process, resulting in a cost-effective conversion process.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Highly Stable N-Doped Carbon-Supported Pd-Based Catalysts Prepared from Biomass Waste for H2 Production from Formic Acid

  • Chaparro-Garnica, Jessica
  • Navlani-García, Miriam
  • Salinas-Torres, David
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Chaparro-Garnica, Jessica|||/items/ef0cb7bf-ab19-4397-9276-686b1829395e
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
Excellent Pd supported on carbon catalysts for the dehydrogenation of formic acid were synthesized from a lignocellulosic biomass residue. The preparation of the carbon support consisted of a H3PO4-assisted hydrothermal carbonization (HTC) and activation of a hemp residue and subsequent nitrogen functionalization. It was observed that the presence of nitrogen groups influenced both the size and the electronic properties of the Pd nanoparticles, which ultimately affected their catalytic properties. Furthermore, the catalytic performance also depended on the synthesis conditions used in the preparation of the catalysts (i.e., reduction of the Pd nanoparticles with NaBH4 prior to the catalytic test or in situ reduction). The best-performance catalysts (Pd/N-HTC (n.r.)), which were prepared by in situ reduction of the nanoparticles, displayed a remarkable catalytic activity with a very high TOF number of 8365 h–1 (TOF value calculated for the 2nd catalytic run and expressed per surface Pd atom) and outstanding stability during 6 consecutive reaction cycles, although the initial activity is maintained for 12 cycles. The catalytic system studied is among the most stable ever reported Pd-based heterogeneous catalysts for the dehydrogenation of formic acid.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Towards understanding the active sites for the ORR in N-doped carbon materials through fine-tuning of nitrogen functionalities: an experimental and computational approach

  • Quílez-Bermejo, Javier
  • Melle-Franco, Manuel
  • San-Fabián, Emilio
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The design of advanced N-doped carbon materials towards oxygen reduction reaction (ORR) catalysis is only possible if the nature of the active sites is fully understood. There is an important piece of research seeking to overcome this challenge through experimental or theoretical results. However, the combination of both approaches is necessary to deepen the knowledge about this subject. This work presents excellent agreement between experimental results and computational models, which provides evidence of the nature of the most active sites in N-doped carbon materials. N-doped carbon materials have been experimentally obtained through double stage treatment of polyaniline in distinct atmospheres (both oxygen-containing and inert atmospheres) at different temperatures (800–1200 °C). According to temperature programmed desorption (TPD), Raman spectroscopy, N2-adsorption isotherms at −196 °C and X-ray photoelectron spectroscopy (XPS), this synthesis method results in the selective formation of nitrogen species, without significant changes in structural order or porosity. ORR catalytic tests evidence the highly efficient catalysis, with platinum-like performance in terms of the current density and onset potential, of N-doped carbon materials selectively containing graphitic-type nitrogen species. Computational chemistry, through DFT calculations, shows that edge-type graphitic nitrogen is more effective towards ORR catalysis than pyridinic, pyrrolic, pyridonic, oxidized and basal-type graphitic nitrogen species.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Activation of electrospun lignin-based carbon fibers and their performance as self-standing supercapacitor electrodes

  • García-Mateos, Francisco J.
  • Ruiz-Rosas, Ramiro
  • Rosas, Juana M.
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Rodríguez-Mirasol, José
  • Cordero, Tomás
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The production and activation of self-standing carbon electrodes from electrospun lignin fibers was analyzed in this work. Carbon microfibers were prepared at 900 °C from air-stabilized spun cloths by direct carbonization under inert atmosphere and with diluted O2. The modifications of the porosity and surface chemistry of the carbon fibers was also studied by adding H3PO4 in the lignin solution and using different oxygen partial pressures during activation. The presence of phosphoric acid not only increases the porosity development and the preparation yield, but also enhances the gravimetric capacitance of the electrodes. In addition, the activation in presence of oxygen increases the surface area and the generation of wider micropores. Microporous carbon fibers with surface areas as high as 2340 m2 g−1 were obtained using this method. The direct conformation of carbon fibers into binderless electrodes allows to achieve high-power rate capability supercapacitors. Activation in presence of oxygen can enhance up to 50% the energy storage of supercapacitors without compromising the power of the device (8.4 Wh kg−1 and Pmax of 47 kW kg−1). However, at high activation degrees, no further gain in energy density is observed due to the excessive widening of micropores, and the loss of electrical conductivity that increases the cell resistance, limiting the power capability of the device. The optimal results in terms of energy, power and durability are achieved combining low amounts of H3PO4 and mild activation with O2, confirming that electrospinning of lignin is a promising method for sustainable production of self-standing supercapacitor electrodes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Biological activities of peptides obtained by pepsin hydrolysis of fishery products

  • Castañeda-Valbuena, Daniel
  • Berenguer-Murcia, Ángel
  • Fernández Lafuente, Roberto
  • Morellon-Sterling, Roberto
  • Tacias-Pascacio, Veymar G.
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
The fishing industry generates tons of waste of great intrinsic value due to its high content of biomolecules such as proteins. The processing of proteins can result in products with high nutritional, pharmacological, and technological interest due to the peptides that can be derived from them. This review work compiles the investigations that have performed on the production of peptides from proteins of fish origin using pepsin as catalyst from the corresponding hydrolytic reaction, with special emphasis on the description of each of the reported biological properties, as well as on some uses that have been explored for these peptides. This work may be useful to promote new research involving the use of pepsin in the production of bioactive peptides from fishery products, as well as for the development of mechanisms that allow their use in different industrial processes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Nitrogen-Doped Superporous Activated Carbons as Electrocatalysts for the Oxygen Reduction Reaction

  • Mostazo-López, María José
  • Salinas-Torres, David
  • Ruiz-Rosas, Ramiro
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
Nitrogen-containing superporous activated carbons were prepared by chemical polymerization of aniline and nitrogen functionalization by organic routes. The resulting N-doped carbon materials were carbonized at high temperatures (600–800 °C) in inert atmosphere. X-ray Photoelectron Spectroscopy (XPS) revealed that nitrogen amount ranges from 1 to 4 at.% and the nature of the nitrogen groups depends on the treatment temperature. All samples were assessed as electrocatalysts for the oxygen reduction reaction (ORR) in alkaline solution (0.1 M KOH) in order to understand the role of well-developed microporosity as well as the different nitrogen functionalities on the electrocatalytic performance in ORR. It was observed that nitrogen groups generated at high temperatures were highly selective towards the water formation. Among the investigated samples, polyaniline-derived activated carbon carbonized at 800 °C displayed the best performance (onset potential of 0.88 V versus RHE and an electron transfer number of 3.4), which was attributed to the highest concentration of N–C–O sites.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Zn-Promoted Selective Gas-Phase Hydrogenation of Tertiary and Secondary C4 Alkynols over Supported Pd

  • González-Fernández, Alberto
  • Berenguer-Murcia, Ángel
  • Cazorla-Amorós, Diego
  • Cárdenas-Lizana, Fernando
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
We have investigated the gas-phase (P = 1 atm; T = 373 K) hydrogenation of (tertiary alkynol) 2-methyl-3-butyn-2-ol (MBY) and (secondary) 3-butyn-2-ol (BY) over a series of carbon (C), non-reducible (Al2O3 and MgO), and reducible (CeO2 and ZnO) supported monometallic [Pd (0.6–1.2% wt) and Zn (1% wt)] and bimetallic Pd–Zn (Pd:Zn mol ratio = 95:5, 70:30, and 30:70) catalysts synthesized by deposition–precipitation and colloidal deposition. The catalysts have been characterized by H2 chemisorption, hydrogen temperature-programmed desorption (H2-TPD), specific surface area (SSA), X-ray photoelectron spectroscopy (XPS), and transmission (TEM) and scanning transmission electron microscopy (STEM) analyses. Reaction over these catalysts generated the target alkenol [2-methyl-3-buten-2-ol (MBE) and 3-buten-2-ol (BE)] through partial hydrogenation and alkanol [2-methyl-butan-2-ol (MBA) and 2-butanol (BA)]/ketone [2-butanone (BONE)] as a result of full hydrogenation and double-bond migration. The catalysts exhibit a similar Pd nanoparticle size (2.7 ± 0.3 nm) but a modified electronic character (based on XPS). Hydrogenation activity is linked to surface hydrogen (from H2 chemisorption and H2-TPD). An increase in H2:alkynol (from 1 → 10) results in enhanced alkynol consumption with a greater rate in the transformation of MBY (vs BY); H2:alkynol had negligible effect on product distribution. Reaction selectivity is insensitive to the Pd site electron density with a similar response (SMBE = 65 ± 9% and SBE = 70 ± 8%) over Pdδ− (on Al2O3 and MgO) and Pdδ+ (on C and CeO2). A Pd/ZnO catalyst delivered enhanced alkenol selectivity (SMBE = 90% and SBE = 96%) attributed to PdZn alloy phase formation (proved by XRD and XPS) but low activity, ascribed to metal encapsulation. A two-fold increase in the consumption rate was recorded for Pd–Zn/Al2O3 (30:70) versus Pd/ZnO with a similar alloy content (32 ± 4% from XPS), ascribed to a contribution due to spillover hydrogen (from H2-TPD) where high alkenol selectivity was maintained.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Biomass waste conversion into low-cost carbon-based materials for supercapacitors: A sustainable approach for the energy scenario

  • Chaparro-Garnica, Jessica
  • Mostazo-López, María José
  • Salinas-Torres, David
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Chaparro-Garnica, Jessica|||/items/ef0cb7bf-ab19-4397-9276-686b1829395e
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
Biomass upgrading is a promising approach to face the current energy consumption and chemicals production. Lignocellulosic biomass residues have taken the lead in this field. In this study, hemp residue-based activated carbons (ACs) were prepared by H3PO4-assisted hydrothermal carbonization (HTC) using a low concentration of H3PO4 (25 wt%). ACs with a high porosity development were obtained (SBET > 1200 m2 g−1), and they were subsequently functionalized with nitrogen groups using mild conditions. As-synthesized ACs were also heat-treated to enhance the electrical conductivity, improving the electrochemical performance. As a proof of concept, electrochemical capacitors (ECs) based on as-prepared ACs in aqueous and organic electrolytes, showing energy densities comparable to those of a capacitor based on an AC used in commercial capacitors. The most attractive outcome of this study is the straightforward, cost-effective, and sustainable methodology to prepare high added-value functional ACs with great potential for energy and environmental applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Formic acid dehydrogenation attained by Pd nanoparticles-based catalysts supported on MWCNT-C3N4 composites

  • Navlani-García, Miriam
  • Salinas-Torres, David
  • Vázquez-Álvarez, Francisco Daniel
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
In this study, we developed Pd nanoparticles-based catalysts supported on composites formed by multi-walled carbon nanotubes (MWCNTs) and graphitic carbon nitride (g-C3N4) in various proportions, for their use in the dehydrogenation of formic acid in the liquid phase. It was observed that the composition of the support determined the average size of the Pd nanoparticles as well as their electronic properties, which ultimately affected the performance of Pd/MWCNT-C3N4 catalysts. Among assessed, the catalyst with 63 wt.% of C3N4 exhibited the best activity, with an initial TOF value of 4258 h-1 calculated based on the surface Pd atoms.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Photocatalytic Oxidation of Propane Using Hydrothermally Prepared Anatase-Brookite-Rutile TiO2 Samples. An In Situ DRIFTS Study

  • Cano-Casanova, Laura
  • Mei, Bastian
  • Mul, Guido
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Cano-Casanova, Laura|||/items/44342f34-c8a2-4069-8bb6-cba47b9cb532
Photocatalytic oxidation of propane using hydrothermally synthesized TiO2 samples with similar primary crystal size containing different ratios of anatase, brookite and rutile phases has been studied by measuring light-induced propane conversion and in situ DRIFTS (diffuse reflectance Fourier transform infrared spectroscopy). Propane was found to adsorb on the photocatalysts, both in the absence and presence of light. The extent of adsorption depends on the phase composition of synthesized titania powders and, in general, it decreases with increasing rutile and brookite content. Still, the intrinsic activity for photocatalytic decomposition of propane is higher for photocatalysts with lower ability for propane adsorption, suggesting this is not the rate-limiting step. In situ DRIFTS analysis shows that bands related to adsorbed acetone, formate and bicarbonate species appear on the surface of the photocatalysts during illumination. Correlation of propane conversion and infrared (IR) data shows that the presence of formate and bicarbonate species, in excess with respect to acetone, is composition dependent, and results in relatively low activity of the respective TiO2. This study highlights the need for precise control of the phase composition to optimize rates in the photocatalytic oxidation of propane and a high rutile content seems to be favorable.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Phenolic compounds in mango fruit: a review

  • Tacias-Pascacio, Veymar G.
  • Castañeda-Valbuena, Daniel
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel
  • Meza-Gordillo, Rocío
  • Gutiérrez, Luis-Felipe
  • Pacheco, Neith
  • Cuevas-Bernardino, Juan C.
  • Ayora-Talavera, Teresa
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
Mangifera indica fruit (mango) is one of the most commercialized fruits around the world occupying the 2nd position as a tropical crop, due to the great variety of existing cultivars from which different food products such as drinks, juices, concentrates, and jams are prepared. The wastes generated during the processing of this fruit (20 million tons), which represent up to 60% of the weight of the fruit and consist mainly of peels (12%) and kernels seeds (20%), cause a series of environmental and economic problems for entrepreneurs in the sector. This is because there are no clear policies for its disposal and reuse. Nevertheless, the development of biotechnological tools has led to these wastes becoming subject of interest for their use in multiple industries such as food and pharmaceuticals, since it has been shown that they can be used as raw material to obtain phenolic compounds with biological activities (antioxidant, antimicrobial, anticancer, etc.). This review compiles the most relevant works from 2016 to 2021 about extraction, quantification, identification, biological activities, and applications of phenolic compounds obtained from the mango tree, with special focus on the fruit, with the objective to promote the use of mango from a sustainable perspective, and with a biorefinery approach.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Bioactive peptides from fisheries residues: A review of use of papain in proteolysis reactions

  • Tacias-Pascacio, Veymar G.
  • Castañeda-Valbuena, Daniel
  • Morellon-Sterling, Roberto
  • Tavano, Olga Luisa
  • Berenguer-Murcia, Ángel
  • Vela-Gutiérrez, Gilber
  • Rather, Irfan A.
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
Papain is a cysteine endopeptidase of vegetal origin (papaya (Carica papaya L.) with diverse applications in food technology. In this review we have focused our attention on its application in the production of bio-peptides by hydrolysis of proteins from fish residues. This way, a residual material, that can become a contaminant if dumped without control, is converted into highly interesting products. The main bioactivity of the produced peptides is their antioxidant activity, followed by their nutritional and functional activities, but peptides with many other bioactivities have been produced. Thera are also examples of production of hydrolysates with several bioactivities. The enzyme may be used alone, or in combination with other enzymes to increase the degree of hydrolysis.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Rational Design of Single Atomic Co in CoNx Moieties on Graphene Matrix as an Ultra‐Highly Efficient Active Site for Oxygen Reduction Reaction

  • Shu, Yasuhiro
  • Miyake, Koji
  • Quílez-Bermejo, Javier
  • Zhu, Yexin
  • Hirota, Yuichiro
  • Uchida, Yoshiaki
  • Tanaka, Shunsuke
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Kong, Chang Yi
  • Nishiyama, Norikazu
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The sharp increase in current energy consumption needs the development of fuel cells (FCs) as one of sustainable, renewable, efficient and eco‐friendly electrochemical conversion systems of energy. The performance of electrocatalysts is crucially important for commercialization of FCs. Commercial Pt based catalysts are used due to their high catalytic activity. However, widespread commercialization is impossible because of the scarcity and poor durability of Pt based catalysts. We are on our quest to find a more stable and affordable alternative catalyst of Pt based catalysts. In particular, single‐atom catalysts supported on graphene are greatly attractive because of their unique characteristic and high catalytic activity. In this work, graphene is hydrothermally treated by sulfuric acid to introduce the ion‐exchanging sites. Then, Co2+ ion‐exchanging, 2‐methylimidazole coordination and pyrolysis process are subsequently conducted to prepare highly‐dispersed single‐atom Co species catalyst with outstanding ORR activity and durability. This work presents a new direction for a rational design of single‐atom catalyst on carbon matrix.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Easy enrichment of graphitic nitrogen to prepare highly catalytic carbons for oxygen reduction reaction

  • Quílez-Bermejo, Javier
  • Pérez-Rodríguez, Sara
  • Canevesi, Rafael L.S.
  • Torres, Daniel
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Celzard, Alain
  • Fierro, Vanessa
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
One of the biggest challenges in producing fuel cells at affordable prices is to synthesize carbon materials selectively doped with graphitic nitrogen, as it is considered the most active nitrogen species for the oxygen reduction reaction (ORR). So far, all strategies focus on the use of nitrogen-containing carbon precursors, which limits the functionalization of commercially available carbon materials. Here, we present a post-functionalization method to boost the catalytic properties of carbon materials for the ORR by selectively enriching activated carbons with nitrogen graphitic species. A commercial high-surface area activated carbon was post-functionalized by a two-step procedure. First, the commercial carbon was mixed with different carbon/urea weight ratios and heated in air at 350 °C. Then, the functionalized materials were heat-treated at high temperature (from 700 to 1300 °C) to tailor the amount and distribution of the different nitrogen species in the resulting carbon structure. Nitrogen functionalization using a carbon to urea weight ratio of 1:2 and heat-treatment at 1100 °C led to highly selective doping in graphitic nitrogen species, which provided the tools to individually asses the catalytic activity of these nitrogen species. In addition, this study presents a low-cost and easily feasible synthesis route to improve the catalytic activity of carbon materials, leading to an onset potential of almost 0.9 V compared to reversible hydrogen electrode for ORR in an alkaline electrolyte. Moreover, this study provides significant evidence for the key role of graphitic nitrogen.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Biotechnological relevance of the lipase A from Candida antarctica

  • Monteiro, Rodolpho R.C.
  • Virgen-Ortiz, Jose J.
  • Berenguer-Murcia, Ángel
  • Rocha, Thays N. da
  • Santos, Jose Cleiton S. dos
  • Alcántara, Andrés R.
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
This review intends to present some of the latest studies on the lipase A from Candida antarctica (CALA). This lipase is among the most stable ones and has some capability to attack the sn-2 position of triglycerides. This makes it a very interesting lipase, especially considering that it is commercially available. The cloning and production of the enzyme together with some structural facts and applications will be discussed in this review. Special focus will be put on the immobilization of the enzyme. The use of the commercially available crosslinked enzyme aggregates of this enzyme will be explained, together with the use of the enzyme in some new trends in enzyme immobilization, such as bio-imprinting of the open form of CALA by detergents and the fixation of the open structure, the design of heterofunctional supports able to take full advantage of the immobilization via interfacial activation but preventing enzyme release, or the design of strategies for the preparation of multiple layers of lipase enzymes (using just CALA or combining CALA with other lipases).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Cellulose hydrolysis catalysed by mesoporous activated carbons functionalized under mild conditions

  • Azar, Fatima Zahra
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
The catalytic hydrolysis of cellulose allows the transformation of this sustainable and renewable raw material to obtain biofuels and high-added value chemicals. The process requires acidic catalysts, which should be preferably solid in order to make it greener and, thus, this work proposes the use of functionalized carbon materials for such an application. A mesoporous commercial carbon of trade name SA-30, abbreviated as SA in this work, has been chemically treated at room temperature to create acidic surface oxygen functional groups. The prepared carbon catalysts have been thoroughly characterized by N2 adsorption-desorption at − 196 ºC, temperature programmed desorption and X-ray photoelectron spectroscopy. SAS carbon (prepared by treatment with a saturated solution of (NH4)2S2O8 in 1 M H2SO4 and named by adding S to the name of the original carbon) is the most effective of the studied catalysts. It allows achieving high cellulose conversion (about 61%) and glucose selectivity. Thus, the low-cost functionalized carbons prepared at mild conditions are effective and promising catalysts for the transformation of cellulose into glucose.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Metal free electrochemical glucose biosensor based on N-doped porous carbon material

  • Quintero-Jaime, Andrés Felipe
  • Quílez-Bermejo, Javier
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
An enzymatic metal-free electrochemical biosensor based on immobilized glucose oxidase on a N-doped porous carbon material has been studied for the detection of glucose in different real samples. The N-doped carbon material, which contains quaternary nitrogen groups, has been obtained by heat treatment of polyaniline. These functionalities promote the electrocatalytic activity to oxygen reduction reaction. The electrochemical biosensor presents a remarkable electrochemical activity towards oxygen reduction reaction, being able to detect changes in oxygen concentration generated by the enzymatic oxidation of glucose, allowing the indirect detection of this compound in phosphate buffered solution (0.1 M PB solution, pH=7.2). The metal-free electrochemical biosensor shows an outstanding performance, with a linear detection range between 5 µM and 5 mM and a high sensitivity of 23.57±1.77 µA mM−1 cm−2 at -0.4 V vs. Ag/AgCl. At these conditions, the addition of ascorbic acid, dopamine, uric acid and l-gluconic acid does not interfere with glucose determination. The method has been successfully applied to human urine and commercial sugary drink samples, without significant matrix effects, providing an alternative for glucose detection.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Data for: "Direct cost-efficient hydrothermal conversion of Amazonian lignocellulosic biomass residue"

  • Azar, Fatima Zahra
  • El Kasmi, Achraf
  • Cruz Jr., Orlando F.
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
Datos de investigación que han permitido escribir el artículo identificado con el doi https://doi.org/10.1007/s13399-023-04045-8
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Nitrogen Doped Superactivated Carbons Prepared at Mild Conditions as Electrodes for Supercapacitors in Organic Electrolyte

  • Mostazo-López, María José
  • Ruiz-Rosas, Ramiro
  • Tagaya, Tomomi
  • Hatakeyama, Yoshikiyo
  • Shiraishi, Soshi
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Nitrogen functionalization of a highly microporous activated carbon (SBET > 3000 m2/g), to be used as electrode of electric double layer capacitor (EDLC), was carried out by different methods based on organic chemistry protocols at low temperature and selective thermal post-treatments under inert atmosphere. The combination of both methods allowed the production of carbon materials with very similar surface area (2400–3000 m2/g) and different surface chemistry. The nitrogen functionalization by chemical methods produce the attachment of 4 at. % N (XPS) by consumption of oxygen functional groups. The thermal treatments rearrange the surface chemistry by decreasing and converting both nitrogen and oxygen moieties. The effect of surface chemistry on the performance of these materials as electrodes for symmetric supercapacitors was analyzed in organic electrolyte (1M TEMABF4/propylene carbonate). The devices showed high gravimetric capacitance (37–40 F/g) and gravimetric energy density (31–37 Wh/kg). The electrochemical stability of the EDLC was evaluated by a floating test under severe conditions of voltage and temperature. The results evidence an improvement of the durability of nitrogen-doped activated carbons modified by chemical treatments due to the decrease of detrimental oxygen functionalities and the generation of nitrogen groups with higher electrochemical stability.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

On the deactivation of N-doped carbon materials active sites during oxygen reduction reaction

  • Quílez-Bermejo, Javier
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
N-doped carbon materials have been considered one of the most promising options for the replacement of platinum-based electrocatalysts towards the oxygen reduction reaction (ORR). This work provides insights into the deactivation routes of N-doped carbon materials. The changes occurring in the active sites of N-doped carbon catalysts have been analyzed in detail through pre- and post-ORR characterization by XPS of selectively N-doped carbon materials. Moreover, computational modelling was used to deepen into the deactivation mechanism of N-doped carbon materials in the ORR. From XPS and computational modelling, it can be concluded that the deactivation of graphitic-type nitrogen species, during the ORR in both acidic and alkaline environments, occurs through oxidation and tautomerization reactions that result in the formation of N–C–O-type groups. In acidic environment, the reaction kinetics is slower due to the high stability of the ORR intermediates. In alkaline electrolyte, the N–C–O-type groups can be easily formed due to the interaction of graphitic-type N species and the OH− anions from the electrolyte. In this case, the catalytic activity is due to the contribution of both graphitic nitrogen groups and N–C–O species.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Hardwood versus softwood Kraft lignin – precursor-product relationships in the manufacture of porous carbon nanofibers for supercapacitors

  • Schlee, Philipp
  • Hosseinaei, Omid
  • O'Keeffe, Christopher A.
  • Mostazo-López, María José
  • Cazorla-Amorós, Diego
  • Herou, Servann
  • Tomani, Per
  • Grey, Clare P.
  • Titirici, Maria-Magdalena
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
The process of stabilization is essential in the production of carbon fibers from lignins. During stabilization, the initially thermoplastic lignin polymer is converted to a thermoset polymer allowing for high-temperature treatment without a change in shape. In this work, hardwood (HKL) and softwood (SKL) Kraft lignins were stabilized in air at temperatures between 190 and 340 °C before carbonization at 800 °C in a nitrogen atmosphere. Due to the differences in side-chain linkages, functional groups and molar mass, the lignins exhibit different structural changes upon stabilization and hence develop different porosities upon carbonization. Both lignins undergo major crosslinking reactions in the side chains at low temperatures and degradation reactions at high temperatures during stabilization. Crosslinking gives rise to narrow pore size distributions with mainly (sub-) nanometer pores, whereas degradation reactions lead to a more open pore structure with additional mesoporosity (>2 nm). When both types of reactions take place simultaneously, highly accessible (sub-) nanoporosity can be effectively created, which boosts the performance of supercapacitors operating in 6 M KOH(aq). This effect terminates when the crosslinking reactions cease and mainly degradation reactions take place, which occurs in HKL at 340 °C. SKL shows both a lower degree of crosslinking and degradation and hence develops less specific surface area. The optimum performance in an aqueous alkaline supercapacitor is achieved with HKL stabilized at 310 °C. It shows a specific gravimetric capacitance of 164 F g−1 at 0.1 A g−1 and 119 F g−1 at 250 A g−1 with a capacitance retention of more than 90% after 10 000 cycles.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Controlled synthesis of mono- and bimetallic Pt-based catalysts for electrochemical ethanol oxidation

  • Veizaga, Natalia S.
  • Mendow, Gustavo
  • Quintero-Jaime, Andrés Felipe
  • Berenguer-Murcia, Ángel
  • de Miguel, Sergio
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Poisoning tolerance of Pt-based catalyst is an important parameter for the designing of direct electrochemical fuel cells (EFCs) based on electrooxidation of alcohols (i.e. methanol, ethanol). Applicability of direct ethanol EFCs is still challenging taking into account the lack of effective electrocatalysts which are able to produce high faradic current densities and high stability towards strong adsorption of C1 and C2 oxidation products. As we present here, mono- and bimetallic Pt-based electrocatalysts have been synthesized on a carbon black support for the elecotrooxidation of ethanol in acidic media. Depending of the molar ratio between poly-n-vinylpyrrolidone (PVP, acting as protecting agent) and Pt, nanoparticle size distribution has been controlled, obtaining an optimal condition of Pt loading and electroactive surface area (ECSA) for the PVP/Pt ratio = 1. The electrochemical behavior of electrocatalyst Pt/Re/CB-1 shows a negligible variation in the ECSA (98.3 m2 g−1) in comparison with the monometallic electrodes (90.2 m2 g−1). In contrast, addition of Ir tends to reduce the ECSA by agglomeration of some nanoparticles and decreasing its electrochemical performance. Incorporation of Re in the alloy promotes bond breaking of the intermediates adsorbed on surface, specifically adsorbed C2 molecules, releasing great number of the active sites from the Pt surface, minimizing the deactivation with cycling and providing remarkable stable catalyst with high specific current densities with the addition of small amounts of Re.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhancement of the TiO2 photoactivity for propene oxidation by carbon incorporation using saccharose in hydrothermal synthesis

  • Cano-Casanova, Laura
  • Amorós-Pérez, Ana
  • Ouzzine, Mohammed
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Cano-Casanova, Laura|||/items/44342f34-c8a2-4069-8bb6-cba47b9cb532
TiO2-C photocatalysts were prepared by hydrothermal synthesis using titanium tetraisopropoxide, saccharose and HCl of variable concentration. The TiO2-C photocatalysts have textural properties similar to those of analogous bare TiO2 samples, but different crystalline phase composition; they only contain anatase instead of an anatase-brookite-rutile mixture in bare TiO2. This reveals that carbon contributes to the stabilization of anatase. Also, the presence of carbon has shown to favor the spherical morphology. The TiO2-C photocatalysts are more active than analogous bare TiO2 ones and P25. The most efficient TiO2-C photocatalysts are those prepared with lower HCl concentration solutions, 0.5 and 0.8 M, which present higher surface area and lower density of hydroxyl surface groups. Carbon, about 0.3–0.7 wt%, seems to be (partially) incorporated into the TiO2 lattice and it likely leads to low electron-hole recombination rate and to emission processes that could contribute to explain the good activity of the TiO2-C samples.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Polyaniline-Derived N-Doped Ordered Mesoporous Carbon Thin Films: Efficient Catalysts towards Oxygen Reduction Reaction

  • Quílez-Bermejo, Javier
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
One of the most challenging targets in oxygen reduction reaction (ORR) electrocatalysts based on N-doped carbon materials is the control of the pore structure and obtaining nanostructured thin films that can easily be incorporated on the current collector. The carbonization of nitrogen-containing polymers and the heat treatment of a mixture of carbon materials and nitrogen precursor are the most common methods for obtaining N-doped carbon materials. However, in this synthetic protocols, the surface area and pore distribution are not controlled. This work enables the preparation of 2D-ordered N-doped carbon materials through the carbonization of 2D polyaniline. For that purpose, aniline has been electropolymerized within the porous structure of two different templates (ordered mesoporous Silica and ordered mesoporous Titania thin films). Thus, aniline has been impregnated into the porous structure and subsequently electropolymerized by means of chronoamperometry at constant potential. The resultant samples were heat-treated at 900 °C with the aim of obtaining 2D N-doped carbon materials within the template structures. Polyaniline and polyaniline-derived carbon materials have been analyzed via XPS and TEM and characterized by electrochemical measurements. It is worth noting that the obtained 2D-ordered mesoporous N-doped carbon materials have proved to be highly active electrocatalysts for the ORR because of the formation of quaternary nitrogen species during the heat treatment.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Efficient production of hydrogen from a valuable CO2-derived molecule: Formic acid dehydrogenation boosted by biomass waste-derived catalysts

  • Chaparro-Garnica, Jessica
  • Navlani-García, Miriam
  • Salinas-Torres, David
  • Berenguer-Murcia, Ángel
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Chaparro-Garnica, Jessica|||/items/ef0cb7bf-ab19-4397-9276-686b1829395e
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
Formic acid has been postulated as one of the most promising liquid organic hydrogen carriers. Numerous studies dealing with the development of efficient catalysts able to boost the dehydrogenation of formic acid can be found in recent literature. However, most of them lack in stability, so that finding stable catalysts is highly desirable yet challenging. In the present study, we developed Pd-based biomass-derived carbon-supported catalysts by following a simple protocol. The effect of the modification of both the metal phase and support has been assessed by incorporating Ag in the form of bimetallic nanoparticles and nitrogen functional groups, respectively. The effect of the method followed for the preparation of the catalysts was also checked. It has been found that the resulting PdAg-based catalysts supported on N-doped biomass-derived carbon materials showed suitable activity and excellent stability under reaction conditions. The present study highlights the potential of modulating the features of the catalysts, not only in terms of the composition of the metal phase and incorporation of heteroatoms in the support, but also in terms of the synthetic protocol used.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Immobilization of papain: A review

  • Tacias-Pascacio, Veymar G.
  • Morellon-Sterling, Roberto
  • Castañeda-Valbuena, Daniel
  • Berenguer-Murcia, Ángel
  • Kamli, Majid Rasool
  • Tavano, Olga Luisa
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
Papain is a cysteine protease from papaya, with many applications due to its broad specificity. This paper reviews for first time the immobilization of papain on different supports (organic, inorganic or hybrid supports) presenting some of the features of the utilized immobilization strategies (e.g., epoxide, glutaraldehyde, genipin, glyoxyl for covalent immobilization). Special focus is placed on the preparation of magnetic biocatalysts, which will permit the simple recovery of the biocatalyst even if the medium is a suspension. Problems specific to the immobilization of proteases (e.g., steric problems when hydrolyzing large proteins) are also defined. The benefits of a proper immobilization (enzyme stabilization, widening of the operation window) are discussed, together with some artifacts that may suggest an enzyme stabilization that may be unrelated to enzyme rigidification.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

On the mechanism of electrochemical functionalization of carbon nanotubes with different structures with aminophenylphosphonic acid isomers. An experimental and computational approach

  • Martínez-Sánchez, Beatriz
  • Quílez-Bermejo, Javier
  • San-Fabián, Emilio
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Electrochemical functionalization of Single-Walled Carbon Nanotubes and Herringbone Carbon Nanotubes (SWCNTs and hCNTs, respectively) has been successfully performed with aminophenylphosphonic acid isomers by potentiodynamic treatment in oxidative conditions. Exceptional selectivity and control of the functional species embedded into the Carbon Nanotubes (CNTs) have been achieved by carefully optimizing the electrochemical conditions in the functionalization. X-ray photoelectron spectroscopy (XPS) analysis determined a maximum heteroatom incorporation of ca. 2.3-2.6 at. % N and 1.4-1.6 at. % P when 2-aminophenylphosphonic acid (2APPA) is used with both carbon materials, probably because of the linear polymeric growth comparable to that of oligomers derived from aniline (ANI). However, the polymeric product obtained with 4-aminophenylphosphonic acid (4APPA) is much more limited, giving rise to a branched structure. In addition, electrochemical characterization, Raman spectroscopy and electron microscopy suggest that SWCNTs structure facilitates the oligomerization of longer but less stable chains through π-π interactions with the walls of CNTs, while hCNTs promote a more stable attachment according to their heterogeneity and higher reactivity. Computational calculations have confirmed the experimental results obtained, which allow us to shed more light on the mechanisms of the electrochemical functionalization of CNT with phosphorus and nitrogen-containing polymers.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

H2 production by cellulose photoreforming with TiO2-Cu photocatalysts bearing different Cu species

  • Belda-Marco, Sergio
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
TiO2-Cu photocatalysts (1 wt.% Cu) containing different copper species have been prepared and used for the generation of hydrogen by photoreforming of cellulose (the major component of biomass) in water at room temperature, using UV light. A positive effect of copper has been clearly observed, and the analysis of the role of the Cu species present shows that a mixture of Cu(I) and Cu(II) favours the process. Among the TiO2-Cu photocatalysts, the one prepared by a simple impregnation method and not heat-treated, which shows small and well dispersed copper species particles, gives the highest hydrogen production.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Mesoporous Activated Carbon Supported Ru Catalysts to Efficiently Convert Cellulose into Sorbitol by Hydrolytic Hydrogenation

  • Azar, Fatima Zahra
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
Catalysts consisting of Ru nanoparticles (1 wt%), supported on mesoporous activated carbons (ACs), were prepared and used in the one-pot hydrolytic hydrogenation of cellulose to obtain sorbitol. The carbon materials used as supports are a pristine commercial mesoporous AC (named SA), and two samples derived from it by sulfonation or oxidation treatments (named SASu and SAS, respectively). The catalysts have been thoroughly characterized regarding both surface chemistry and porosity, as well as Ru electronic state and particle size. The amount and type of surface functional groups in the carbon materials becomes modified as a result of the Ru incorporation process, while a high mesopore volume is preserved upon functionalization and Ru incorporation. The prepared catalysts have shown to be very active, with cellulose conversion close to 50% and selectivity to sorbitol above 75%. The support functionalization does not lead to an improvement of the catalysts’ behavior and, in fact, the Ru/SA catalyst is the most effective one, with about 50% yield to sorbitol, and a very low generation of by-products.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Efficient and labor-saving Ru/C catalysts for the transformation of levulinic acid into γ-valerolactone under mild reaction conditions

  • Ruiz-Bernal, Zaira
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
Ru/C catalysts for the transformation of levulinic acid into gamma-valerolactone have been prepared using carbon materials with different textural and chemical properties, and morphology. In the mild reaction conditions used (70 °C, 15 bar H2, 1 h), all the reduced catalysts are active and selective, with similar behavior independently of the support's properties. Surprisingly, the un-reduced (as prepared) catalysts show also catalytic activity, which varies (from moderate to high) with the carbon support type, indicating that an in situ (under reaction) reduction process takes place. The catalysts prepared with the supports of lower surface chemistry are almost as active as their reduced counterparts, whereas those prepared with rich surface chemistry supports are noticeably less active, but become activated in consecutive runs. The size of the developed Ru particles depends on the reduction conditions (i.e., reduction treatment at 250 °C or reaction conditions) and is highly influenced by the support's surface chemistry, which determines the metal–support interaction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrochemical performance of N‐doped superporous activated carbons in ionic liquid‐based electrolytes

  • Mostazo-López, María José
  • Krummacher, Jakob
  • Balducci, Andrea
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The electrochemical performance of nitrogen-doped and non-doped superporous activated carbons as electrodes for supercapacitors was assessed in organic and ionic liquid-based electrolytes. The nitrogen functionalization was carried out through post-modification treatments at mild conditions to produce N-doped activated carbons that preserve the microporosity of the pristine carbon material. The electrodes based on these materials provide large capacitance values (up to 150–180 F/g) in both 1 M Pyr14TFSI/PC and 1 M Pyr14BF4/PC due to their tailored porous texture, given by their well-developed microporosity and low mesopore volume. The electrochemical double layer capacitors based on these materials displayed outstanding capacitance (37–40 F/g and 14 F/cm3) and energy values (44–48 Wh/kg and 16–17 Wh/L). The nitrogen-doped activated carbons evidence high stability at positive and negative polarization potentials due the presence of specific N functionalities. The results prove that surface chemistry of carbon materials plays a key role on their degradation under high operation voltage conditions. The durability of the devices can be improved by doping carbon electrodes with selected nitrogen groups, such as nitrogen heterocycles and amine-like surface functionalities.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Life Cycle assessment of biorefinery technology producing activated carbon and levulinic acid

  • Chaparro-Garnica, Jessica
  • Guiton, Mélanie
  • Salinas-Torres, David
  • Morallon, Emilia
  • Benetto, Enrico
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Chaparro-Garnica, Jessica|||/items/ef0cb7bf-ab19-4397-9276-686b1829395e
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
Life Cycle Assessment (LCA) is applied to eco-design the H3PO4-assisted hydrothermal carbonization (HTC) process converting biomass residue into high-value products. The main innovation of the process relies on the combination of the H3PO4-assisted HTC with the activation treatment of the obtained hydrochar, resulting in activated carbon that is then functionalized. In addition, the liquid phase obtained from HTC is eventually purified to extract levulinic acid. Under average conditions at the laboratory scale (reference), the LCA showed that electricity consumption is the main contributor (45–70%) to impacts on climate change, photochemical ozone formation, acidification, freshwater eutrophication, freshwater ecotoxicity and fossil resources use. Pyridine, the main chemical used in the functionalization stage, contributes to impacts on human toxicity and on marine eutrophication respectively by 77.3% and 47.3%. Building on these results, two further scenarios were studied, one considering the maximum capacity of each equipment and another one assuming the potential improvements once the process will be upscaled. The scenarios were validated in a series of laboratory scale tests. Depending on the environmental impact category chosen, the results showed a reduction potential of 30–65% as compared to the reference scenario. These findings confirm the added value of LCA in the ecodesign of technologies and pave the way to further improvements of the technology itself but also of the LCA methodology used for the assessment.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

On the Origin of the Effect of pH in Oxygen Reduction Reaction for Nondoped and Edge-Type Quaternary N-Doped Metal-Free Carbon-Based Catalysts

  • Quílez-Bermejo, Javier
  • Strutyński, Karol
  • Melle-Franco, Manuel
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Metal-free carbon-based catalysts have gained much attention during the last 15 years as an alternative toward the replacement of platinum-based catalysts for the oxygen reduction reaction (ORR). However, carbon-based catalysts only show promising catalytic activity in alkaline solution. Concurrently, the most optimized polymer electrolyte membrane fuel cells use proton exchange membranes. This means that the cathode electrode is surrounded by a protonic environment in which carbon materials show poor performance, with differences above 0.5 V in EONSET for nondoped carbon materials. Therefore, the search for highly active carbon-based catalysts is only possible if we first understand the origin of the poor electrocatalytic activity of this kind of catalysts in acidic conditions. We address this matter through a combined experimental and modeling study, which yields fundamental principles on the origin of the pH effects in ORR for carbon-based materials. This is relevant for the design of pH-independent metal-free carbon-based catalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Photocatalytically-driven H2 production over Cu/TiO2 catalysts decorated with multi-walled carbon nanotubes

  • Fernández-Catalá, Javier
  • Navlani-García, Miriam
  • Verma, Priyanka
  • Berenguer-Murcia, Ángel
  • Mori, Kohsuke
  • Kuwahara, Yasutaka
  • Yamashita, Hiromi
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Fernández-Catalá, Javier|||/items/8ee681a9-afe7-4345-be73-4399b5083d34
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
In this study, we assessed the effect of the incorporation of multi-walled carbon nanotubes (MWCNT) on a TiO2 support containing different active metals to obtain Metal/TiO2-MWCNT photocatalytic systems. The materials prepared in this work were characterized by ICP-OES, TEM, EDX, XRD, PL, UV–vis, and nitrogen physisorption techniques. Among those investigated metals, Cu was shown to be the most promising for the present application. The assessment of the photocatalytic performance of Cu/TiO2-MWCNT with various Cu contents revealed that the catalytic activity depends on the Cu loading and the photocatalyst with 1 wt.% of Cu displayed the best performance among investigated. The incorporation of MWCNT in the support enhanced the photocatalytic activity towards the production of H2 under visible and UV–vis light irradiation at room temperature.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Efficient and cost-effective ORR electrocatalysts based on low content transition metals highly dispersed on C3N4/super-activated carbon composites

  • Alemany Molina, Gabriel
  • Quílez-Bermejo, Javier
  • Navlani-García, Miriam
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
Oxygen reduction reaction (ORR) is one of the most important electrochemical reactions for fuel cells. However, commercial Pt-based catalysts used have important limitations such as their deactivation by carbon monoxide and Pt scarcity. In the present work, small and highly-dispersed copper and iron clusters were anchored onto composite supports based on carbon nitride (C3N4) nanostructures and a highly porous carbon material. Catalysts with a moderate carbon nitride content showed an interesting catalytic behaviour because of the combination of the metallic active sites and the availability of micropores, which play an active role in ORR. The presence of either Fe or Cu in the synthesis affected the structure of the resulting composite materials, as well as their electrocatalytic activity. Copper-based materials showed superior catalytic activity, which is supported by the information obtained from the evaluation of the system using DFT computational calculations.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

The unveiling of a Levulinic Acid Isomer in High Performance Liquid Chromatography analysis, a key point for the reliable determination of the catalytic conversion of Levulinic Acid to γ-Valerolactone

  • Ruiz-Bernal, Zaira
  • Tane, Elena Georgiana
  • Burgos, Nuria
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Tane, Elena Georgiana|||/items/45998146-5019-4a50-a12f-43cf5211e86c
This work was motivated by the difficulties found in the analysis and quantification of levulinic acid (LA) and the reaction products resulting from the catalyzed transformation of LA into γ-valerolactone (GVL) using High Performance Liquid Chromatography (HPLC). The starting study carried out with the Zorbax Eclipse XDB-C8 column and UV/Vis detector (or Diode Array Detector, DAD) was puzzling, mainly because two different signals appeared in the analysis of aqueous LA standards. The use of C8-UV/Vis-MS and the measurements with DAD in range wavelength mode (RWL) allowed to suggest the presence of pseudo-LA (sometimes regarded as unidentified impurities in the reactant) together with LA. The finding of an additional LA species was fundamental for the accurate quantification of LA, necessary to provide reliable results in the analysis of the catalytic LA transformation products. The study carried out also allowed the identification of 4-hydroxypentanoic acid (HPA), a labile intermediate compound. The analysis of the target solution (resulting from the explained catalytic system) was also performed with a REZEX ROA-Organic Acid H+ column and Refractive Index Detector (RID) in order to determine its applicability and to check if the results obtained with the two configurations were coherent. The REZEX-RID configuration led to a simpler analysis, as it did not involve the separation of the LA species and allowed the detection of 1,4-pentanediol (not possible by UV/Vis analysis). The results obtained with REZEX-RID helped to support the need of considering the presence and quantification of an LA isomer in the standard solutions for the right quantification of LA using the C8-UV/vis (or DAD) configuration. The present study clarifies relevant practical aspects of the HPLC-UV/Vis (or DAD) analysis of LA present in aqueous solutions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A review on the immobilization of pepsin: A Lys-poor enzyme that is unstable at alkaline pH values

  • Morellon-Sterling, Roberto
  • Tavano, Olga Luisa
  • Bolivar, Juan M.
  • Berenguer-Murcia, Ángel
  • Vela-Gutiérrez, Gilber
  • Sabir, Jamal S.M.
  • Tacias-Pascacio, Veymar G.
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
Pepsin is a protease used in many different applications, and in many instances, it is utilized in an immobilized form to prevent contamination of the reaction product. This enzyme has two peculiarities that make its immobilization complex. The first one is related to the poor presence of primary amino groups on its surface (just one Lys and the terminal amino group). The second one is its poor stability at alkaline pH values. Both features make the immobilization of this enzyme to be considered a complicated goal, as most of the immobilization protocols utilize primary amino groups for immobilization. This review presents some of the attempts to get immobilized pepsin biocatalyst and their applications. The high density of anionic groups (Asp and Glu) make the anion exchange of the enzyme simpler, but this makes many of the strategies utilized to immobilize the enzyme (e.g., amino-glutaraldehyde supports) more related to a mixed ion exchange/hydrophobic adsorption than to real covalent immobilization. Finally, we propose some possibilities that can permit not only the covalent immobilization of this enzyme, but also their stabilization via multipoint covalent attachment.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Surface-Enriched Boron-Doped TiO2 Nanoparticles as Photocatalysts for Propene Oxidation

  • Cano-Casanova, Laura
  • Ansón Casaos, Alejandro
  • Hernández Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Garro, Núria
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Cano-Casanova, Laura|||/items/44342f34-c8a2-4069-8bb6-cba47b9cb532
A series of nanostructured boron-TiO2 photocatalysts (B-X-TiO2-T) were prepared by sol–gel synthesis using titanium tetraisopropoxide and boric acid. The effects of the synthesis variables, boric acid amount (X) and crystallization temperature (T), on structural and electronic properties and on the photocatalytic performance for propene oxidation, are studied. This reaction accounts for the remediation of pollution caused by volatile organic compounds, and it is carried out at low concentrations, a case in which efficient removal techniques are difficult and costly to implement. The presence of boric acid during the TiO2 synthesis hinders the development of rutile without affecting the textural properties. X-ray photoelectron spectroscopy analysis reveals the interstitial incorporation of boron into the surface lattice of the TiO2 nanostructure, while segregation of B2O3 occurs in samples with high boron loading, also confirmed by X-ray diffraction. The best-performing photocatalysts are those with the lowest boron loading. Their high activity, outperforming the equivalent sample without boron, can be attributed to a high anatase and surface hydroxyl group content and efficient photo-charge separation (photoelectrochemical characterization, PEC), which can explain the suppression of visible photoluminescence (PL). Crystallization at 450 °C renders the most active sample, likely due to the development of a pure anatase structure with a large surface boron enrichment. A shift in the wavelength-dependent activity profile (PEC data) and the lowest electron–hole recombination rate (PL data) are also observed for this sample.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Effect of the carbon surface chemistry on the metal speciation in Ru/C catalysts. Impact on the transformation of levulinic acid to γ-valerolactone

  • Ruiz-Bernal, Zaira
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
A set of Ru/C catalysts prepared using a commercial active carbon and a series of carbon materials derived from it (treatment in N2 flow, at 300, 600 or 900 °C that selectively removes surface oxygen complexes), of similar textural properties and different surface chemistry, were used, without reduction treatment, in the aqueous phase transformation of levulinic acid (LA) to γ-valerolactone (GVL) at 70 °C. The prepared Ru/C catalysts were active, being activity and selectivity strongly dependent on the support surface chemistry. It was confirmed that the supported Ru species became reduced under reaction conditions, and this process was more efficient in catalysts prepared with the heat treated supports, due to the different interactions created between Ru species and the support surface. In a cleaner carbon surface, the anchorage of the Ru species on carbon oxygen groups was limited, and they were more prone to be reduced and to move, forming more defined metallic structures. The carbon surface chemistry determined the Ru speciation (reduced and oxidized species), and the proportion of reduced Ru drived the H spill over process, which was related to the creation of protonic acid sites, proposed to be key point to explain the trend in selectivity to GVL.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Residuos de biomasa como plataforma para obtener materiales carbonosos porosos mediante carbonización hidrotermal en presencia de H3PO4, Biomass wates as plataform to obtain porous carbon materials through a hydrothermal carbonization in presence of H3PO4

  • Chaparro-Garnica, Jessica
  • Mostazo-López, María José
  • Salinas-Torres, David
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Chaparro-Garnica, Jessica|||/items/ef0cb7bf-ab19-4397-9276-686b1829395e
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
La carbonización hidrotermal (HTC) es un proceso útil para la producción de materiales carbonosos a partir de residuos de biomasa. Sin embargo, para desarrollar una porosidad elevada es necesario emplear un tratamiento de activación adicional. Entre los métodos de activación más utilizados para los residuos de biomasa está la activación química empleando ácido fosfórico (H3PO4) como agente activante. Nuestro grupo de investigación ha desarrollado un proceso basado en un tratamiento hidrotermal en presencia de una disolución acuosa de ácido fosfórico de baja concentración, evitando así la etapa de impregnación, que puede producir materiales carbonosos con un elevado desarrollo de porosidad. Este proceso basado en un tratamiento hidrotermal es prometedor para obtener materiales carbonosos de bajo coste, ya que es respetuoso con el medio ambiente al involucrar recursos renovables y la posibilidad de reutilizar la disolución de ácido fosfórico. En este trabajo se presenta la caracterización de materiales carbonosos porosos obtenidos mediante este procedimiento y sus perspectivas para futuras aplicaciones en almacenamiento de energía.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Advantages of the Incorporation of Luffa-Based Activated Carbon to Titania for Improving the Removal of Methylene Blue from Aqueous Solution

  • Boumad, Souad
  • Infantes-Molina, Antonia
  • Barroso-Martín, Isabel
  • Moretti, Elisa
  • Rodríguez-Castellón, Enrique
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles
  • Bouchenafa-Saib, Naima
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
This research aims to study the possible improvement of methylene blue (MB) removal from aqueous solution by hybrid adsorbent-catalysts (AdsCats) prepared through the incorporation of activated carbon derived from Luffa cylindrica fibers (LAC) to TiO2 photocatalysts. LAC with a specific surface area of 1170 m2/g was prepared by chemical activation with phosphoric acid at 500 °C. TiO2/LAC composites with 70 and 90 wt.% Degussa P25 titania content were prepared. The materials were characterized by N2 physical adsorption, XRD, FTIR, and XPS. The AdsCats displayed a very good dispersion of TiO2 over LAC, a surface area of close to 200 or 400 m2/g, depending on the composition, and high crystallinity, showing the presence of anatase and rutile phases. MB removal was studied in two different scenarios: under UV-light after reaching adsorption equilibrium, and under UV-light once the liquid effluent and the AdsCats were in contact. The MB removal by LAC has proved to be very efficient, highlighting the predominant role of adsorption over photodegradation. The prepared AdsCats have also been compared with their components. The results showed that TiLAC hybrids have superior photocatalytic performance than P25, showing TiLAC-7/3 90% MB removal with respect to the initial concentration just after 30 min of UV light irradiation for both studied scenarios.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Opportunities in the use of carbon materials to develop heterogenized metal complexes for catalytic applications

  • Román-Martínez, M. Carmen
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
Carbon materials constitute a broad family of solids that encompass a high variety of physical and chemical properties, including morphology. These materials have shown to be very useful as catalysts supports and, in this context, also for the heterogenization of metal complexes owing catalytic properties. This work is mainly, the summary of the results obtained in several research projects focused on developing heterogenized molecular catalysts by exploiting the properties of a plethora of carbon materials to address several immobilization procedures.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Preparation of Pt/CNT Thin-Film Electrodes by Electrochemical Potential Pulse Deposition for Methanol Oxidation

  • Quintero-Ruiz, Jose
  • Ruiz-Rosas, Ramiro
  • Quílez-Bermejo, Javier
  • Salinas-Torres, David
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
High-quality performance of catalysts is increasingly required to meet industry exigencies. However, chemical synthesis is often insufficient to maximize the potential properties of the catalysts. On the other hand, electrochemical synthesis has arisen as a promising alternative to overcome these limitations and provide precise control in the preparation of catalysts. In this sense, this work involved the well-controlled electrochemical synthesis of a catalyst based on platinum nanoparticle deposition on carbon nanotubes using only electrochemical treatments. Thin films of functionalized carbon nanotubes were cast onto the surface of a glassy carbon electrode using potential pulsed electrodeposition, resulting in a better distribution of the carbon nanotubes on the electrode when comparing with traditional methods. Then, platinum nanoparticles were electrodeposited on the carbon nanotube-modified electrode. To check the performance of the catalyst and the relevance of the electrochemical synthesis treatments, the samples were analyzed as electrocatalysts towards methanol electrooxidation, showing an important improvement in the catalytic activity in comparison with electrodes that were prepared by traditional methodologies.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ru Catalysts Supported on Commercial and Biomass-Derived Activated Carbons for the Transformation of Levulinic Acid into γ-Valerolactone under Mild Conditions

  • Ruiz-Bernal, Zaira
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
Ru catalysts (1 wt.%) supported on commercial and biomass-derived activated carbons (AC) have been prepared, thoroughly characterized, and used in the hydrogenation of levulinic acid to produce gamma-valerolactone (GVL). This is an important platform compound that plays a key role in the production of liquid fuels and that can also be used, for example, as a food flavoring agent, antifreeze, and solvent. The study focuses on the influence of the carbon support characteristics, such as porous texture and acidity, on the properties and performance (LA conversion and selectivity to GVL) of the catalysts. Catalytic activity tests have been carried out at 170 °C and also in noticeably milder conditions (70 °C) to implement a less energy-demanding process. All the catalysts show high LA conversion and GVL yield at 170 °C, while at 70 °C, important differences between them, related to the support properties, have been found. The catalysts prepared with more acidic supports show better catalytic properties: very good catalytic performance (98% LA conversion and 77% selectivity to GVL) has been obtained in mild temperature conditions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Heterogenization of a Chiral Molecular Catalyst on a Carbon Support using Tryptophan as Anchor Molecule

  • Rufete Beneite, Mónica
  • Román-Martínez, M. Carmen
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
The (R,R)‐RhDuphos chiral catalyst has been heterogenized on the surface of a carbon material with the aid of L‐tryptophan (Trp) as anchor molecule. Trp is effectively adsorbed on the carbon surface through its arene unit and is able to coordinate Rh by means of the carbonyl and amine functional groups. The chiral hybrid catalysts prepared are very active for the asymmetric hydrogenation of 2‐methyl‐acetamidoacrylate with an acceptable enantioselectivity. Besides, when prepared with a high Tpr/Rh ratio they have shown to be stable and reusable.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Efficient Production of Multi-Layer Graphene from Graphite Flakes in Water by Lipase-Graphene Sheets Conjugation

  • Losada-Garcia, Noelia
  • Berenguer-Murcia, Ángel
  • Cazorla-Amorós, Diego
  • Palomo, Jose M.
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
Biographene was successfully produced in water from graphite flakes by a simple, rapid, and efficient methodology based on a bioexfoliation technology. The methodology consisted in the application of a lipase, with a unique mechanism of interaction with hydrophobic surfaces, combined with a previous mechanical sonication, to selectively generate lipase-graphene sheets conjugates in water at room temperature. The adsorption of the lipase on the graphene sheets permits to keep the sheets separated in comparison with other methods. It was possible to obtain more than 80% of graphene (in the form of multi-layer graphene) from low-cost graphite and with less damage compared to commercial graphene oxide (GO) or reduced GO. Experimental analysis demonstrated the formation of multi-layer graphene (MLG) mainly using lipase from Thermomyces Lanuginosus (TLL).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficient production of multi-Layer graphene from graphite flakes in water by lipase-graphene sheets conjugation

  • Losada-García, Noelia
  • Berenguer Murcia, A.
  • Cazorla Amorós, Diego
  • Palomo, José Miguel
© 2019 by the authors., Biographene was successfully produced in water from graphite flakes by a simple, rapid, and efficient methodology based on a bioexfoliation technology. The methodology consisted in the application of a lipase, with a unique mechanism of interaction with hydrophobic surfaces, combined with a previous mechanical sonication, to selectively generate lipase-graphene sheets conjugates in water at room temperature. The adsorption of the lipase on the graphene sheets permits to keep the sheets separated in comparison with other methods. It was possible to obtain more than 80% of graphene (in the form of multi-layer graphene) from low-cost graphite and with less damage compared to commercial graphene oxide (GO) or reduced GO. Experimental analysis demonstrated the formation of multi-layer graphene (MLG) mainly using lipase from Thermomyces Lanuginosus (TLL)., This research was supported by GRO PROGRAM 2017 and SAMSUNG L.S. The authors thank the support by the Spanish National Research Council (CSIC). We also thank to the and MCIUN and FEDER by funding Projects RTI2018-095291-B-I00 and RTI2018-095291-B-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación

Genipin as an emergent tool in the design of biocatalysts: mechanism of reaction and applications

  • Tacias-Pascacio, Veymar G.
  • García-Parra, Esmeralda
  • Vela-Gutiérrez, Gilber
  • Virgen-Ortiz, Jose J.
  • Berenguer-Murcia, Ángel
  • Alcántara, Andrés R.
  • Fernández-Lafuente, Roberto
Genipin is a reagent isolated from the Gardenia jasminoides fruit extract, and whose low toxicity and good crosslinking properties have converted it into a reactive whose popularity is increasing by the day. These properties have made it widely used in many medical applications, mainly in the production of chitosan materials (crosslinked by this reactive), biological scaffolds for tissue engineering, and nanoparticles of chitosan and nanogels of proteins for controlled drug delivery, the genipin crosslinking being a key point to strengthen the stability of these materials. This review is focused on the mechanism of reaction of this reagent and its use in the design of biocatalysts, where genipin plays a double role, as a support activating agent and as inter- or intramolecular crosslinker. Its low toxicity makes this compound an ideal alterative to glutaraldehyde in these processes. Moreover, in some cases the features of the biocatalysts prepared using genipin surpassed those of the biocatalysts prepared using other standard crosslinkers, even disregarding toxicity. In this way, genipin is a very promising reagent in the design of biocatalysts., A.B.-M. thanks MICIU (RTI2018-095291-B-I00, MINECO/FEDER) and the Generalitat Valenciana (PROMETEOII/2018/076) for financial support, and R.F.-L. gratefully recognizes the support from MICIU from Spanish Government (project number CTQ2017-86170-R). J.J.V.-O. thanks to CONACYT (Mexico) for the financial support to the basic science project number, CB-2016-01, 286992., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Fotocatalizadores de TiO2 superficialmente enriquecidos en boro para la oxidación del propeno en fase gas

  • Cano Casanova, Laura
  • Lillo-Ródenas, Maria Ángeles
  • Román Martínez, María del Carmen
  • Ansón-Casaos, Alejandro
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Garro, Núria
Resumen del póster presentado en la Reunión Bienal de la Sociedad Española de Catálisis - SECAT 2021, celebrada en Valencia, del 18 al 20 de octubre 2021., El dióxido de titanio es muy interesante como fotocatalizador en muchas reacciones de descomposición de contaminantes ya que, además de su excelente capacidad oxidativa, es estable, inocuo, biocompatible y asequible económicamente. Sin embargo, es deseable mejorar su eficiencia fotocatalítica mediante la disminución de la velocidad de recombinación de los pares electrón-hueco, así como ampliar su intervalo de absorción hacia el espectro visible. Una de las potenciales opciones de mejora se centra en la modificación del TiO2 con boro, lo que podría dar lugar a cambios en la energía y ocupación de los estados electrónicos en mitad de la banda prohibida del semiconductor. De acuerdo con esto, en el presente trabajo se han preparado y caracterizado catalizadores B-TiO2 con distintas cantidades de boro, se han tratado a distinta temperatura de cristalización y se ha analizado su actividad en la reacción de fotooxidación de propeno., La preparación de los fotocatalizadores implica las siguientes etapas: i) la mezcla de 5 ml de TTIP y 50 ml de isopropanol se agrega gota a gota, con agitación constante, a 50 ml de una mezcla de agua / isopropanol (1:1) que contiene una cierta cantidad de ácido bórico (5,10,50,100 y 230 mg). ii) El gel resultante se envejece durante 12 h, después se recoge por filtrado y se seca en un horno a 90 ºC. iii) El TiO2 obtenido se trata térmicamente en un reactor de cuarzo horizontal en atmósfera de aire a 550 °C, aunque en algunos casos también se ha realizado el tratamiento a 450 y 350 ºC. Los fotocatalizadores, que se han nombrado como B-X-TiO2-T, donde X es la cantidad (en mg) de ácido bórico añadido durante la síntesis y T la temperatura de cristalización (en °C), se han caracterizado mediante adsorción física de gases, difracción de rayos X (DRX) y espectroscopía fotoelectrónica de rayos (XPS). Además, algunos de los materiales se han caracterizado por espectroscopía de fotoluminiscencia (PL) y en celda fotoelectroquímica (PEC). La oxidación fotocatalítica de propeno en fase gas se llevó a cabo a temperatura ambiente empleando 0.11 g de fotocatalizador y una corriente de 100 ppmv de propeno en aire, con flujo de 30 ó 60 ml/min, utilizando una lámpara UV (TL8W/05 FAM, Philips) de λ=365 nm. El análisis del gas de salida del reactor se ha realizado mediante espectrometría de masas (OmniStar GSD 301 O1). Los fotocatalizadores B-X-TiO2-550 presentan propiedades texturales similares y pequeñas diferencias en el grado de cristalinidad y proporción de fases cristalinas (anatasa y rutilo). Se ha observado que la presencia de ácido bórico durante la síntesis de TiO2 parece dificultar la formación de rutilo. Además, para las muestras B-100-TiO2-550 y B-230-TiO2-550 se observa un pico adicional (a 2θ= 28. 1º) que corresponde al óxido bórico (B2O3). El análisis por XPS de las muestras B-X-TiO2-550 revela diferencias importantes con respecto al material B-0-TiO2-550, y se ha observado que en las muestras B-100-TiO2-550 y B-230-TiO2-550 el boro está fundamentalmente presente como B2O3 (de acuerdo con los datos de DRX)., En el resto de las muestras se deduce que hay especies BxOy con relación y/x inferior a 1.5. El análisis mediante XPS permite también deducir que, en las muestras con menos cantidad de boro, una mayor proporción del mismo interacciona con la titania. La muestra B-5-TiO2-550 presenta la mayor actividad catalítica. La caracterización de esta muestra mediante medidas de PL y PEC permite explicar dicho resultado, ya que se ha encontrado una disminución drástica de todas las bandas de PL, lo que indica una reducción en la tasa de recombinación de los pares electrón-hueco fotoexcitados. Además, el voltagrama cíclico revela que la irradiación da lugar a una activación pronunciada de ciertos estados superficiales cercanos a la banda de conducción. La temperatura de cristalización también afecta la actividad catalítica. Así, la muestra B-5-TiO2-450 es un 10% más activa que la B-5-TiO2-550. Esta mejora puede deberse a que con el tratamiento a 450 °C no se genera rutilo y a que el enriquecimiento superficial en boro es mayor. Además, los análisis de PL indican que este fotocatalizador presenta una menor recombinación de los pares electrón-hueco y las medidas de fotocorriente muestran un desplazamiento de la longitud de onda de absorción hacia mayores valores, lo que implica que la energía de la banda prohibida (Eg) es menor. La combinación de estas propiedades puede explicar el buen comportamiento obtenido para la muestra tratada a 450 ºC., Los autores agradecen la financiación económica a los proyectos PROMETEO/2018/076 (GV/Feder), RTI2018-095291-B-I00 y ENE2016-79282-C5-1-R (Ministerio de Ciencia, Innovación y Universidades), T03-17R (Gobierno de Aragón) y VIGROB-136 (UA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Fotocatalizadores de TiO2 modificados con B. Aplicación en la oxidación fotocatalítica de propeno

  • Cano Casanova, Laura
  • Amorós-Pérez, A.
  • Ansón-Casaos, Alejandro
  • Lillo-Ródenas, Maria Ángeles
  • Román Martínez, María del Carmen
1 figura.-- Resumen del trabajo presentado en la reunión SECAT 2019, Reunión Bienal de la Sociedad Española de Catálisis, celebrada del 24 al 26 de junio de 2019, en Córdoba (España)., El dióxido de titanio es muy interesante como fotocatalizador en muchas reacciones de descomposición de contaminantes, principalmente debido a su excelente capacidad oxidativa, estabilidad química, bajo precio, inocuidad y biocompatibilidad. Sin embargo, aún sería deseable mejorar su eficiencia fotocatalítica mediante la disminución de la velocidad de recombinación de los pares electrón-hueco y la ampliación del intervalo de absorción hacia el espectro visible. Una de las opciones potenciales de mejora se centra en la modificación del TiO2 con boro, que en algunos casos podría dar lugar a una disminución de la energía del límite inferior de la banda de conducción del TiO2. En el presente trabajo se estudia dicha modificación empleando ácido bórico para introducir B en la composición del TiO2 preparado mediante el método sol-gel y se investiga el efecto de la cantidad de boro introducido y la temperatura de cristalización. Estos fotocatalizadores se han probado en la oxidación fotocatalítica de propeno en fase gas., Los autores agradecen la financiación económica de los proyectos PROMETEO/2018/076 (GV/Feder), RTI2018-095291-B-I00 y ENE2016-79282-C5-1-R (Ministerio de Ciencia, Innovación y Universidades), T03-17R (Gobierno de Aragón) y VIGROB-136 (UA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface-enriched boron-doped TiO2 nanoparticles as photocatalysts for propene oxidation

  • Cano Casanova, Laura
  • Ansón-Casaos, Alejandro
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Garro, Núria
  • Lillo-Ródenas, Maria Ángeles
  • Román Martínez, María del Carmen
2 schemes, 8 figures.-- Supplementary information available., A series of nanostructured boron-TiO2 photocatalysts (B-X-TiO2-T) were prepared by sol–gel synthesis using titanium tetraisopropoxide and boric acid. The effects of the synthesis variables, boric acid amount (X) and crystallization temperature (T), on structural and electronic properties and on the photocatalytic performance for propene oxidation, are studied. This reaction accounts for the remediation of pollution caused by volatile organic compounds, and it is carried out at low concentrations, a case in which efficient removal techniques are difficult and costly to implement. The presence of boric acid during the TiO2 synthesis hinders the development of rutile without affecting the textural properties. X-ray photoelectron spectroscopy analysis reveals the interstitial incorporation of boron into the surface lattice of the TiO2 nanostructure, while segregation of B2O3 occurs in samples with high boron loading, also confirmed by X-ray diffraction. The best-performing photocatalysts are those with the lowest boron loading. Their high activity, outperforming the equivalent sample without boron, can be attributed to a high anatase and surface hydroxyl group content and efficient photo-charge separation (photoelectrochemical characterization, PEC), which can explain the suppression of visible photoluminescence (PL). Crystallization at 450 °C renders the most active sample, likely due to the development of a pure anatase structure with a large surface boron enrichment. A shift in the wavelength-dependent activity profile (PEC data) and the lowest electron–hole recombination rate (PL data) are also observed for this sample., The authors thank funding to the Spanish Ministry of Science, Innovation and Universities and FEDER, project of reference RTI2018-095291-B-I00, GV/FEDER (PROMETEO/2018/076), and University of Alicante (VIGROB-136) for financial support. Financial support from Spanish MICINN/AEI under projects PID2019-104272RB-C51/AEI/10.13039/501100011033 and PID2019-104272RB-C53/AEI/10.13039/501100011033 and the Diputación General de Aragón under project T03_20R (Grupo Reconocido) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Easy enrichment of graphitic nitrogen to prepare highly catalytic carbons for oxygen reduction reaction

  • Quílez Bermejo, J.
  • Pérez Rodríguez, Sara
  • Canevesi, Rafael L. S.
  • Torres Gamarra, Daniel
  • Morallón, Emilia
  • Cazorla Amorós, Diego
  • Celzard, Alain
  • Fierro, Vanessa
5 figures, 1 table., One of the biggest challenges in producing fuel cells at affordable prices is to synthesize carbon materials selectively doped with graphitic nitrogen, as it is considered the most active nitrogen species for the oxygen reduction reaction (ORR). So far, all strategies focus on the use of nitrogen-containing carbon precursors, which limits the functionalization of commercially available carbon materials. Here, we present a post-functionalization method to boost the catalytic properties of carbon materials for the ORR by selectively enriching activated carbons with nitrogen graphitic species. A commercial high-surface area activated carbon was post-functionalized by a two-step procedure. First, the commercial carbon was mixed with different carbon/urea weight ratios and heated in air at 350 °C. Then, the functionalized materials were heat-treated at high temperature (from 700 to 1300 °C) to tailor the amount and distribution of the different nitrogen species in the resulting carbon structure. Nitrogen functionalization using a carbon to urea weight ratio of 1:2 and heat-treatment at 1100 °C led to highly selective doping in graphitic nitrogen species, which provided the tools to individually asses the catalytic activity of these nitrogen species. In addition, this study presents a low-cost and easily feasible synthesis route to improve the catalytic activity of carbon materials, leading to an onset potential of almost 0.9 V compared to reversible hydrogen electrode for ORR in an alkaline electrolyte. Moreover, this study provides significant evidence for the key role of graphitic nitrogen., The French research team thanks ANR-15-IDEX-04-LUE and the TALiSMAN project (2019–000215), financed by the European Regional Development Fund (ERDF). The authors from UA thank MICINN and ERDF (project RTI2018-095291-B-I00) for financial support., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

A review on the immobilization of pepsin: A Lys-poor enzyme that is unstable at alkaline pH values

  • Morellon-Sterling, Roberto
  • Tavano, Olga
  • Bolívar Bolívar, Juan Manuel
  • Berenguer-Murcia, Ángel
  • Vela-Gutiérrez, Gilber
  • Sabir, Jamal
  • Tacias-Pascacio, Veymar
  • Fernandez-Lafuente, Roberto
Pepsin is a protease used in many different applications, and in many instances, it is utilized in an immobilized form to prevent contamination of the reaction product. This enzyme has two peculiarities that make its immobilization complex. The first one is related to the poor presence of primary amino groups on its surface (just one Lys and the terminal amino group). The second one is its poor stability at alkaline pH values. Both features make the immobilization of this enzyme to be considered a complicated goal, as most of the immobilization protocols utilize primary amino groups for immobilization. This review presents some of the attempts to get immobilized pepsin biocatalyst and their applications. The high density of anionic groups (Asp and Glu) make the anion exchange of the enzyme simpler, but this makes many of the strategies utilized to immobilize the enzyme (e.g., amino-glutaraldehyde supports) more related to a mixed ion exchange/hydrophobic adsorption than to real covalent immobilization. Finally, we propose some possibilities that can permit not only the covalent immobilization of this enzyme, but also their stabilization via multipoint covalent attachment.