Pasar al contenido principal

DESARROLLO DE NUEVOS MATERIALES POR METODOS ELECTROQUIMICOS PARA APLICACIONES EN ENERGIA Y MEDIOAMBIENTE

PID2019-105923RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 43
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Revisiting the redox transitions of Polyaniline. Semiquantitative interpretation of electrochemically induced IR bands

  • Huerta, Francisco|||0000-0002-9791-0355
  • Quijada, César|||0000-0002-9965-9651
  • Montilla, F.
  • Morallón, E.
[EN] The redox transitions of PANI in acidic medium have been monitored by a combination of cyclic voltammetry, in situ conductance and in situ FTIR spectroscopy. The results of the semiquantitative analysis strongly suggest that the classical tetrameric model of PANI does not satisfactorily describe the actual structures of the polymer at different redox states. An octameric model is revisited, with the inclusion of essential resonant structures, to provide an appropriate prediction of the relative IR intensity changes of the aromatic Csingle bondC stretching (at around 1520 cm¿1) and the quinoid Cdouble bondC stretching (at around 1590 cm¿1) vibrations observed by FTIR, which are difficult to interpret by considering only 4 aniline rings. Particularly, it is found that the emeraldine state is better described as a resonance hybrid of the classical bipolaronic and semiquinoid (polaron lattice) structures, while most of the charge transferred at the onset of the second voltammetric peak comes from the additional oxidation of this hybrid, which becomes unstable in the electrochemical environment producing mineralization to CO2 and release of soluble quinones., This work was financed by the Spanish Ministerio de Ciencia e Innovacion (project PID2019-105923RB-I00) and by Generalitat Valenciana (Conselleria de Educacion, Investigacion, Cultura y Deporte through project PROMETEO/2018/087). The authors of this work are deeply grateful to Prof. Jose Luis Vazquez Pico (Pepe, nowadays retired) for his mentorship, which was the seed to develop this work. We appreciate the wise advice he gave us during our careers which served us to deepen the science contained in this article, as well as for the friendship with which he honored us over the years.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Manganese oxides/LaMnO3 perovskite materials and their application in the oxygen reduction reaction

  • Flores-Lasluisa, Jhony X.
  • Cazorla-Amorós, D.
  • Morallón, E.
  • Huerta, Francisco|||0000-0002-9791-0355
[EN] Manganese-based materials can catalyze the oxygen reduction reaction (ORR), although their activity is known to depend on the crystalline phases and on the concentration of surface-active species. In the present study, we have optimized these two parameters to obtain improved catalysts for ORR. A sol-gel method was used to synthesize LaMnO3-manganese oxides composites with different lanthanum-to- manganese atomic ratios. The synthesized materials, which can be described as La1-xMnOz, were tested under ORR conditions and characterized by several physicochemical techniques such as SEM, XPS, EDX or XRD. It was found that the concentration of lanthanum governs the formation of different crystal phases and determines the crystallite size. Besides, high values of x tend to increase the surface concentration of manganese and therefore to produce more active sites for ORR. Among the materials analysed, La0.6MnOz mixed with carbon black (Vulcan) showed the best electrocatalytic performance. The high tolerance to methanol makes this electrocatalyst a promising alternative to substitute Pt-based materials in alkaline electrolytes., The authors thank to the Ministerio de Ciencia e Innovacion (PID2019-105923RB-I00) for financial support. J.X.F.-L. gratefully acknowledges MINECO for financial support through an FPI contract (BES-2017-081598).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dynamics and coherence of photoexcited states in polyfluorene films with ordered chain phases

  • Quintero-Jaime, Andrés Felipe
  • Hafed-Khatiri, Salma
  • Montilla, Francisco
  • Huerta, Francisco|||0000-0002-9791-0355
  • Quijada, César|||0000-0002-9965-9651
[EN] Understanding the optical and electronic excitations in conjugated polymers, their delocalization, and dynamics is of paramount importance for improving the performance of optoelectronic devices. The structure of a conjugated polymer in the solid state, the presence of ordered domains, and conformational subunits strongly affect the exciton and polaron interactions. The effect of the crystalline structure of polyfluorene films on exciton dynamics was studied using a combination of electrochemical and spectroscopic methods. Optoelectronic alterations caused by the p-doping process strongly suggest that the electrochemical charge injection occurs mainly in the more ordered beta-phase. Evidence for the presence of either alpha- or beta-phase is supported by the different behavior of the fluorescence quenching at increasing doping levels (the quenching elements appear more homogeneously distributed in the alpha-PFO phase). Estimated singlet exciton coherence lengths indicate that it delocalizes over 20 repeat units in the alpha-PFO phase, but it extends only over 14 units for beta-PFO., The authors would like to thank Spanish Ministerio de Ciencia e Innovacion (projects PID2019-105923RB-I00, PDC2021-120884-I00, European Union NextGenerationEU PRTR-C17.I1) and Generalitat Valenciana (project GVA-THINKINAZUL/2021/015 and PROMETEO/2018/087) for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Determination of exciton diffusion coefficient in cojnjugated polymer films: Novel methods based on spectroelectrochemical techniques

  • Montilla, Francisco
  • Quintero-Jaime, Andres F.
  • Huerta, Francisco|||0000-0002-9791-0355
  • Quijada, César|||0000-0002-9965-9651
[EN] The understanding of exciton dynamics is a central issue in the operation of conjugated polymer-based optoelectronic devices, like solar cells, light-emitting diodes or electrochemiluminescent cells. In this work, we explore the applicability of combined in situ electrochemical fluorescence and UV-vis spectroscopies for the study of electrochemically induced quenching of photoluminescence as novel tools for the determination of exciton diffusion in a model conjugated polymer, poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylvynilene] (MEH-PPV). It is demonstrated that the quenching process observed upon electrochemical doping follows a linear Stern-Volmer mechanism at low doping levels, with a time-independent rate constant typical of diffusion-controlled annihilation processes. From the Stern-Volmer rate constant and the exciton-polaron critical distance, an exciton diffusion coefficient is derived whose value is in close agreement with those reported in the literature. These results support the suitability of these spectroelectrochemical techniques as fast and powerful alternative tools for the reliable determination of exciton diffusion coefficients in conjugated polymers., This work was supported by Generalitat Valenciana (Conselleria de Educacion, Investigacion, Cultura y Deporte) project PROMETEO/2018/087 and Spanish Ministerio de Ciencia e Innovacion (project PID2019105923RBI00)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

LaNi1-xCoxO3 perovskites for application in electrochemical reactions involving molecular oxygen

  • Flores-Lasluisa, J.X.
  • Cazorla-Amorós, Diego
  • Morallón, Emilia
  • Huerta, Francisco|||0000-0002-9791-0355
[EN] LaNi1-xCoxO3 perovskite materials were synthesized by a sol-gel method for use in electrochemical reactions which involve molecular oxygen. The metal oxides were characterized by different physicochemical techniques and it was observed that the incorporation of Co induces some changes in the surface of the materials that affect the electrocatalytic activity. The different perovskite metal oxides were mixed with carbon black (Vulcan) to improve their electrocatalytic performance. The results from TPR and TPD techniques supported the XPS interpretation suggesting that a stronger interaction between carbon material and metal oxides can be obtained by physically mixing the two materials. This interaction improves the electron transfer and enhances the catalytic activity. Among the as-prepared materials, it was observed that the electrocatalytic performance of LaNi1-xCoxO3 perovskite/Vulcan materials is higher than that of LaNiO3/Vulcan for ORR, but similar towards OER. It is claimed that Co3+ is more catalytic for ORR, while Ni3+ favors the OER. Moreover, the presence of Co stimulates the formation of chemisorbed oxygen species, which also favor the electron transfer. Metal oxides containing both cations show higher stability, being this effect more notorious for OER. LaNi0.5Co0.5O3/Vulcan seems a suitable bifunctional catalyst for both electrochemical reactions., The authors would like to thank PID2019-105923RB-I00 project funded by MCIN/AEI/10.13039. J.X.F.-L. gratefully acknowledges MINECO for financial support through an FPI contract (BES-2017- 081598)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transition metal oxides with perovskite and spinel structures for electrochemical energy production applications

  • Flores-Lasluisa, J. X.
  • Cazorla-Amoros, D.
  • Morallón, E.
  • Huerta, Francisco|||0000-0002-9791-0355
[EN] Transition metal oxide-based materials are an interesting alternative to substitute noble-metal based catalyst in energy conversion devices designed for oxygen reduction (ORR), oxygen evolution (OER) and hydrogen evo-lution reactions (HER). Perovskite (ABO3) and spinel (AB2O4) oxides stand out against other structures due to the possibility of tailoring their chemical composition and, consequently, their properties. Particularly, the elec-trocatalytic performance of these materials depends on features such as chemical composition, crystal structure, nanostructure, cation substitution level, eg orbital filling or oxygen vacancies. However, they suffer from low electrical conductivity and surface area, which affects the catalytic response. To mitigate these drawbacks, they have been combined with carbon materials (e.g. carbon black, carbon nanotubes, activated carbon, and gra-phene) that positively influence the overall catalytic activity. This review provides an overview on tunable perovskites (mainly lanthanum-based) and spinels featuring 3d metal cations such as Mn, Fe, Co, Ni and Cu on octahedral sites, which are known to be active for the electrochemical energy conversion., The authors thank to the Ministerio de Ciencia e Innovacion/AEI (PID 2019-105923RB-I00) for financial support. J.X.F.-L. gratefully acknowledges MINECO for financial support through an FPI contract (BES- 2017-081598).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Carbon Material and Cobalt-Substitution Effects in the Electrochemical Behavior of LaMnO3 for ORR and OER

  • Flores-Lasluisa, Jhony X.
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Huerta, Francisco|||0000-0002-9791-0355
[EN] LaMn1-xCoxO3 perovskites were synthesized by a modified sol-gel method which incorporates EDTA. These materials' electrochemical activity towards both oxygen reduction (ORR) and oxygen evolution reactions (OER) was studied. The cobalt substitution level determines some physicochemical properties and, particularly, the surface concentration of Co and Mn's different oxidation states. As a result, the electroactivity of perovskite materials can be tuned using their composition. The presence of cobalt at low concentration influences the catalytic activity positively, and better bifunctionality is attained. As in other perovskites, their low electrical conductivity limits their applicability in electrochemical devices. It was found that the electrochemical performance improved significantly by physically mixing with a mortar the active materials with two different carbon black materials. The existence of a synergistic effect between the electroactive component and the carbon material was interpreted in light of the strong carbon-oxygen-metal interaction. Some mixed samples are promising electrocatalysts towards both ORR and OER., This research was funded by Ministerio de Ciencia e Innovacion (Grant number: PID2019-105923RB-100) and (grant number: BES-2017-081598). And the APC was funded by Universidad de Alicante.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

P-functionalized carbon nanotubes promote highly stable electrocatalysts based on Fe-phthalocyanines for oxygen reduction: Experimental and computational studies

  • Martínez-Sánchez, Beatriz
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Iron(II) phthalocyanines (FePc) supported on functionalized nanostructured carbon materials have been studied as electrocatalysts for the oxygen reduction reaction (ORR) in an alkaline medium. Herein, two types of carbon nanotubes (CNTs) have been explored as support, Single-Walled Carbon Nanotubes and Herringbone Carbon Nanotubes (SWCNTs and hCNTs, respectively), both electrochemically modified with ortho- aminophenylphosphonic acid (2APPA), which provides phosphate axial coordinating ligands for the immobilization of FePc molecules. All the catalysts were prepared via a facile incipient wetness impregnation method. Comprehensive experimental analysis together with density functional theory (DFT) calculations has demonstrated both the importance of the five-coordinated Fe macrocycles that favor the interaction between the FePc and the carbon support, as well as the effect of the CNT structure in the ORR. FePc axial coordination provides a better dispersion, leading to higher stability and a favorable electron redistribution that also tunes the ORR performance by lowering the stability of the reaction intermediates. Interestingly, such improvement occurs with a very low content of metal (∼1 wt% Fe), which is especially remarkable when hCNT support is employed. This work provides a novel strategy for the development of Fe-containing complexes as precious metal-free catalysts towards the ORR.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sustainable Synthesis of Metal-Doped Lignin-Derived Electrospun Carbon Fibers for the Development of ORR Electrocatalysts

  • Jaimes-Paez, Cristian Daniel
  • García-Mateos, Francisco J.
  • Ruiz-Rosas, Ramiro
  • Rodríguez-Mirasol, José
  • Cordero, Tomás
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Jaimes-Paez, Cristian Daniel|||/items/ac839a07-b546-4847-9217-c898cb6012b7
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The aim of this work is to establish the Oxygen Reduction Reaction (ORR) activity of self-standing electrospun carbon fiber catalysts obtained from different metallic salt/lignin solutions. Through a single-step electrospinning technique, freestanding carbon fiber (CF) electrodes embedded with various metal nanoparticles (Co, Fe, Pt, and Pd), with 8–16 wt% loadings, were prepared using organosolv lignin as the initial material. These fibers were formed from a solution of lignin and ethanol, into which the metallic salt precursors were introduced, without additives or the use of toxic reagents. The resulting non-woven cloths were thermostabilized in air and then carbonized at 900 °C. The presence of metals led to varying degrees of porosity development during carbonization, improving the accessibility of the electrolyte to active sites. The obtained Pt and Pd metal-loaded carbon fibers showed high nanoparticle dispersion. The performance of the electrocatalyst for the oxygen reduction reaction was assessed in alkaline and acidic electrolytes and compared to establish which metals were the most suitable for producing carbon fibers with the highest electrocatalytic activity. In accordance with their superior dispersion and balanced pore size distribution, the carbon fibers loaded with 8 wt% palladium showed the best ORR activity, with onset potentials of 0.97 and 0.95 V in alkaline and acid media, respectively. In addition, this electrocatalyst exhibits good stability and selectivity for the four-electron energy pathway while using lower metal loadings compared to commercial catalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Multi-wall carbon nanotubes electrochemically modified with phosphorus and nitrogen functionalities as a basis for bioelectrodes with improved performance

  • Quintero-Jaime, Andrés Felipe
  • Conzuelo, Felipe
  • Schuhmann, Wolfgang
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
In this study, multi-wall carbon nanotubes (MWCNTs) were electrochemically modified with nitrogen and phosphorus species and employed as platform to immobilize pyrroloquinoline quinone-dependent glucose dehydrogenase (PQQ-GDH) for the fabrication of bioelectrodes for glucose detection. Depending on the upper potential limit used during the electrochemical modification of MWCNTs, the nature and amount of the nitrogen and phosphorus species incorporated in the carbon material surface can be selectively controlled. These species act as anchoring groups for the immobilization of the PQQ-GDH. The value of the upper potential limit used in the electrochemical modification influences the electron-transfer rate between the electrode and the enzyme. The performance of the bioelectrodes for glucose oxidation and detection is improved by the electrochemical modification conditions, leading to an increased sensitivity towards glucose oxidation from 39.2 to 53.6 mA gMWCNT−1 mM−1 in a linear range between 0.1 to 1.2 mM. This electrochemical modification is considered as an alternative for the preparation of highly sensitive glucose bioelectrodes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrochemistry and study of indirect electrocatalytic properties of a novel organometallic Schiff base nickel(II) complex

  • Ourari, Ali
  • Aggoun, Djouhra
  • Karce, Houssam Eddine
  • Berenguer Betrián, Raúl
  • Morallon, Emilia
  • Lanez, Touhami
  • Ouennoughi, Yasmina
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
This paper explores the synthesis, characterization and electrocatalytic behavior of a new ferrocenyl-substituted tetradentate Nickel Schiff base complex. The complex, N,N-Bis[5-(N,N-ferrocenmethylaminophenyl)methylsalicylidyne]-1,2-diaminoethane of nickel(II) ((Fc-Me-Ani)2-LNiII), was prepared by heating the tetradentate Schiff base ligand ((Fc-Me-Ani)2-H2L) in the presence of a stoichiometric amount of tetrahydrate nickel(II) acetate salt, dissolved in a mixture of ethanol and methylene chloride at 50°C under N2 atmosphere. The molecular structure of the complex was deduced from elemental analysis, FT-IR, UV-Vis and mass spectrometry. The electrochemical characterization was investigated by cyclic voltammetry on a glassy carbon electrode and the effect of the solvent (methylenechloride (DCM), dimethylformamide (DMF) and dimethylsulfoxide (DMSO)) was analyzed. The electrochemical characterization of the nickel complex reveals the electron-transfer capability of the two electroactive redox moieties, ie. the ferrocenyl moieties (Fc+‏/Fc) and the metallic centre (Ni2+/Ni+). The diffusion coefficient (D) and the standard rate constant (K0) have also been calculated from the cyclic voltammetry and the polarization curves of ferrocenyl redox process. So, they are influenced by both used method and medium. Cyclic voltammetry has also been performed to examine the performances of the electrocatalytical reduction reaction towards two alkylhalides like ethyl chloroacetate and ethyl bromoacetate in DMF solution. The current increase and the cathodic shift of the Ni2+→Ni+ reduction process in the presence of increasing concentrations of these alkyl halides evidence the catalytic effect of the (Fc-Me-Ani)2-LNiII complex in the reduction of these compounds.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrochemical functionalization at anodic conditions of multi-walled carbon nanotubes with chlorodiphenylphosphine

  • Quintero-Jaime, Andrés Felipe
  • Ghisolfi, Alessio
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Covalent functionalization of multi-walled carbon nanotubes (MWCNTs) and oxidized MWCNTs (o-MWCNTs) with chlorodiphenylphosphine (Ph2PCl) has been studied by cyclic voltammetry in organic medium. Depending the upper potential limit used in the electrochemical functionalization, different amount of phosphorus incorporation n is obtained, as result of the formation of radical species during the electrochemical oxidation of the Ph2PCl. The electrochemical oxidation of Ph2PCl promotes the covalent attachment of diphenylphosphine-like structure on the carbon nanotube surface. At the same time, the incorporation of Cl on the carbon nanotubes is observed during the functionalization. Furthermore, the presence of oxygen surface groups on the MWCNTs provides a favorable attachment of the Ph2P ∙ + species, which has promoted preferentially the formation of C-P bonds, whereas the amount of Cl is reduced.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Manganese oxides/LaMnO3 perovskite materials and their application in the oxygen reduction reaction

  • Flores-Lasluisa, Jhony Xavier
  • Huerta Arráez, Francisco
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
Manganese-based materials can catalyze the oxygen reduction reaction (ORR), although their activity is known to depend on the crystalline phases and on the concentration of surface-active species. In the present study, we have optimized these two parameters to obtain improved catalysts for ORR. A sol-gel method was used to synthesize LaMnO3-manganese oxides composites with different lanthanum-to-manganese atomic ratios. The synthesized materials, which can be described as La1-xMnOz, were tested under ORR conditions and characterized by several physicochemical techniques such as SEM, XPS, EDX or XRD. It was found that the concentration of lanthanum governs the formation of different crystal phases and determines the crystallite size. Besides, high values of x tend to increase the surface concentration of manganese and therefore to produce more active sites for ORR. Among the materials analysed, La0.6MnOz mixed with carbon black (Vulcan) showed the best electrocatalytic performance. The high tolerance to methanol makes this electrocatalyst a promising alternative to substitute Pt-based materials in alkaline electrolytes.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Data for the regular article "Microwave-assisted synthesis of carbon-supported Pt nanoparticles for their use as electrocatalysts in the oxygen reduction reaction and hydrogen evolution reaction"

  • Jaimes-Paez, Cristian Daniel
  • Vences-Alvarez, Esmeralda
  • Salinas-Torres, David
  • Morallon, Emilia
  • Rangel-Mendez, José René
  • Cazorla-Amorós, Diego
  • Jaimes-Paez, Cristian Daniel|||/items/ac839a07-b546-4847-9217-c898cb6012b7
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Carbon Material and Cobalt-Substitution Effects in the Electrochemical Behavior of LaMnO3 for ORR and OER

  • Flores-Lasluisa, Jhony Xavier
  • Huerta Arráez, Francisco
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
LaMn1−xCoxO3 perovskites were synthesized by a modified sol-gel method which incorporates EDTA. These materials’ electrochemical activity towards both oxygen reduction (ORR) and oxygen evolution reactions (OER) was studied. The cobalt substitution level determines some physicochemical properties and, particularly, the surface concentration of Co and Mn’s different oxidation states. As a result, the electroactivity of perovskite materials can be tuned using their composition. The presence of cobalt at low concentration influences the catalytic activity positively, and better bifunctionality is attained. As in other perovskites, their low electrical conductivity limits their applicability in electrochemical devices. It was found that the electrochemical performance improved significantly by physically mixing with a mortar the active materials with two different carbon black materials. The existence of a synergistic effect between the electroactive component and the carbon material was interpreted in light of the strong carbon–oxygen–metal interaction. Some mixed samples are promising electrocatalysts towards both ORR and OER.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Metal oxide Perovskite-Carbon composites as electrocatalysts for Zinc-air batteries. Optimization of ball-milling mixing parameters

  • García-Rodríguez, Mario
  • Flores-Lasluisa, Jhony Xavier
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
Zn-air batteries (ZABs) are promising electrochemical devices to store energy. Metal oxide perovskites mixed with carbon materials are highlighted as interesting materials for this application because of their appropriate bifunctional performance in oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The interaction between both components of the electrocatalyst is important in the bifunctional electrocatalytic activity, and the mixing method plays an important role in this interaction. Then, different mixing methods have been studied in this work (ball-milling, mortar and manual shaking). The use of different physicochemical techniques such as temperature programmed desorption (TPD), temperature programmed reduction (TPR) and X-ray photoelectron spectroscopy (XPS) in the materials characterization, allows us to conclude that the mixing method strongly influences the particle size and the interaction between both components, which determine the final electrocatalytic activity. The materials prepared by ball-milling displayed the best performance. Herein, the experimental conditions were optimized to obtain electrocatalysts with enhanced electrocatalytic activity for ORR and OER. Low rotating speed, air atmosphere and low ball-milling time generate electrocatalysts with a small nanoparticle size, more homogeneous and with a higher interaction between both components, which enhances electron transfer, and consequently, the overall oxygen-involved reactions. The best electrocatalyst obtained was studied as air-electrode in a Zn-air battery and it was compared to a commercial Pt/C electrocatalyst, obtaining higher cyclability (55.2 vs. 51.7%) for 30 h, and higher energy density at 5 mA/cm2 (764 mAh/g vs. 741 mAh/g).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Transition metal oxides with perovskite and spinel structures for electrochemical energy production applications

  • Flores-Lasluisa, Jhony Xavier
  • Huerta Arráez, Francisco
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
Transition metal oxide-based materials are an interesting alternative to substitute noble-metal based catalyst in energy conversion devices designed for oxygen reduction (ORR), oxygen evolution (OER) and hydrogen evolution reactions (HER). Perovskite (ABO3) and spinel (AB2O4) oxides stand out against other structures due to the possibility of tailoring their chemical composition and, consequently, their properties. Particularly, the electrocatalytic performance of these materials depends on features such as chemical composition, crystal structure, nanostructure, cation substitution level, eg orbital filling or oxygen vacancies. However, they suffer from low electrical conductivity and surface area, which affects the catalytic response. To mitigate these drawbacks, they have been combined with carbon materials (e.g. carbon black, carbon nanotubes, activated carbon, and graphene) that positively influence the overall catalytic activity. This review provides an overview on tunable perovskites (mainly lanthanum-based) and spinels featuring 3d metal cations such as Mn, Fe, Co, Ni and Cu on octahedral sites, which are known to be active for the electrochemical energy conversion.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

One-step synthesis of MN4 molecular electrocatalysts assembled on different nanocarbon architectures for efficient oxygen reduction

  • Trigueros-Sancho, Alicia
  • Martínez-Sánchez, Beatriz
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
One-step dry ball-milling method was employed to prepare different electrocatalysts based on cobalt(II) or iron(II) phthalocyanines (CoPc and FePc, respectively) supported on commercial carbon materials (CNovel or a carbon black (Vulcan)), controlling the nominal metal content to 1 or 2 wt %. No pre-treatment (e.g., functionalization of the carbon support), solvent addition or post-processing steps (e.g., heat-treatment, acid-treatment, etc.) were required before, during or after the mechanochemical process. Different characterization techniques have been used to study the morphological, physicochemical and electrochemical properties of the synthesized materials. The as-prepared catalysts can be directly used without involving further procedure. Solid-state ball-milling strategy provides excellent contact of both components, which synergistically improved their electrocatalytic performance. Regarding the carbon materials, the adequate nanoarchitecture and surface chemistry of CNovel permits better distribution of metal phthalocyanines (MPc) compared to a carbon black. The FePc supported on CNovel shows excellent electrocatalytic activity for oxygen reduction reaction (ORR), in terms of good selectivity towards the 4-electron pathway, long-term stability and low overpotential in alkaline medium. This study opens new paths for a simple, scalable and cost-effective catalyst manufacturing through mechanochemistry that can be modulated by selecting the proper nanocarbon support and MPc/carbon ratio.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Modulating the coordination environment and metal choice in carbon buckypapers supported metal phthalocyanines for enhanced electrocatalytic carbon dioxide reduction

  • Martínez-Sánchez, Beatriz
  • Singh-Morgan, Amrita
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
In the search of versatile electrocatalysts for the electrochemical reduction of carbon dioxide (CO2RR), different transition metal phthalocyanines (MPc, where M=Fe, Co, Ni and Cu) have been immobilized by an easy and scalable wet impregnation on carbon nanotubes (CNTs) in the form of buckypaper (BP). Both the nature of the metal and the surface chemistry of the carbon support were found to play a pivotal role in determining their CO2RR efficiency and selectivity. We disclose here a potentiodynamic strategy for the controlled surface modification of BP with N- and P-containing polymeric species as a simple heterogenization strategy for molecular catalysts, enabling to easily tune their electrocatalytic performance. Syngas (mixture of H2 and CO) was obtained as the main product from CO2RR using FePc, CoPc and NiPc as electrocatalysts on functionalized (BPf) or non-modified BP. In contrast, CuPc was found to mainly catalyze the hydrogen evolution reaction (HER), with small amounts of formate as the only CO2RR product. It is possible to modulate the H2/CO ratio in the final product through the appropriate selection of the metal in MPc, the modification of the coordination environment by the controlled functionalization of the carbon support and the adjustment of the operating conditions. In particular, H2/CO ratios in a range between 0.17 and 1.28 have been obtained with good stability during electrolysis. Among all the MPc studied, CoPc surfaced as the most promising candidate for the reduction of CO2 to CO and H2 production, a finding substantiated by computational studies highlighting the positive impact of phosphate ligands on CoPc. This strategy outlines the starting line of a potential route toward the controlled generation of CO2RR-related products.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhanced lanthanum-stabilized low crystallinity metal oxide electrocatalysts with superior activity for oxygen reactions

  • García-Rodríguez, Mario
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are key electrochemical reactions for the development of rechargeable Zn-air batteries. However, due to the high cost of commercial noble metal-based catalysts and their limited bifunctionality, it is necessary the design of new electrocatalysts. In this study, stable electrocatalysts have been synthesized through a hydrothermal method and further low-temperature thermal treatment. The materials consist of La stabilized low crystallinity Mn and Co metal (hydro-)oxides. The electrocatalytic performance of these materials has been compared with counterparts calcined at higher temperatures. The findings demonstrate that materials synthesized at lower temperatures and with low crystallinity exhibit superior electrocatalytic activity for both ORR and OER. Moreover, the research highlights the favorable influence of the lanthanum cation, which enhances changes of surface morphology and oxidation states of other cations (Mn and Co). Additionally, the positive contribution of the carbon component to electrochemical activity and electrical conductivity has been elucidated. The best electrocatalyst was studied in a rechargeable Zn-air battery with a durability of up to 120 hours. They exhibited better stability and performance than the commercial Pt/C + RuO2 catalyst currently used.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Metal free electrochemical glucose biosensor based on N-doped porous carbon material

  • Quintero-Jaime, Andrés Felipe
  • Quílez-Bermejo, Javier
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
An enzymatic metal-free electrochemical biosensor based on immobilized glucose oxidase on a N-doped porous carbon material has been studied for the detection of glucose in different real samples. The N-doped carbon material, which contains quaternary nitrogen groups, has been obtained by heat treatment of polyaniline. These functionalities promote the electrocatalytic activity to oxygen reduction reaction. The electrochemical biosensor presents a remarkable electrochemical activity towards oxygen reduction reaction, being able to detect changes in oxygen concentration generated by the enzymatic oxidation of glucose, allowing the indirect detection of this compound in phosphate buffered solution (0.1 M PB solution, pH=7.2). The metal-free electrochemical biosensor shows an outstanding performance, with a linear detection range between 5 µM and 5 mM and a high sensitivity of 23.57±1.77 µA mM−1 cm−2 at -0.4 V vs. Ag/AgCl. At these conditions, the addition of ascorbic acid, dopamine, uric acid and l-gluconic acid does not interfere with glucose determination. The method has been successfully applied to human urine and commercial sugary drink samples, without significant matrix effects, providing an alternative for glucose detection.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

The role of oxygen heteroatoms in the surface (electro)chemistry of carbon materials

  • Alemany Molina, Gabriel
  • Martínez-Sánchez, Beatriz
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Engineering the surface chemistry of carbon-based materials is of crucial importance in tuning their intrinsic properties, including electrical conductivity, wettability, electroactivity, adsorption potential, reactivity, physical and chemical stability. Intense research has recently focused on understanding the role of surface oxygen functional groups when carbon materials are in contact with an electrolyte or solvent in order to tailor and improve them for technological applications. For this purpose, their synthesis method and/or further oxidation treatments should be carefully selected, since they can substantially influence not only the oxygen content, but also the nature of the oxygen moieties, which could be decisive in determining the surface properties of the resulting material. The combined use of different chemical, spectroscopic and electrochemical techniques, provides unique and reliable information about the contribution of a specific oxygen-containing group in the surface (electro)chemistry of carbon-based materials. This paper provides a discussion of the role of oxygen heteroatoms in the surface electrochemistry of a carbon material as they relate to their influence on both its electroactivity and reactivity.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Nitrogen Doped Superactivated Carbons Prepared at Mild Conditions as Electrodes for Supercapacitors in Organic Electrolyte

  • Mostazo-López, María José
  • Ruiz-Rosas, Ramiro
  • Tagaya, Tomomi
  • Hatakeyama, Yoshikiyo
  • Shiraishi, Soshi
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Nitrogen functionalization of a highly microporous activated carbon (SBET > 3000 m2/g), to be used as electrode of electric double layer capacitor (EDLC), was carried out by different methods based on organic chemistry protocols at low temperature and selective thermal post-treatments under inert atmosphere. The combination of both methods allowed the production of carbon materials with very similar surface area (2400–3000 m2/g) and different surface chemistry. The nitrogen functionalization by chemical methods produce the attachment of 4 at. % N (XPS) by consumption of oxygen functional groups. The thermal treatments rearrange the surface chemistry by decreasing and converting both nitrogen and oxygen moieties. The effect of surface chemistry on the performance of these materials as electrodes for symmetric supercapacitors was analyzed in organic electrolyte (1M TEMABF4/propylene carbonate). The devices showed high gravimetric capacitance (37–40 F/g) and gravimetric energy density (31–37 Wh/kg). The electrochemical stability of the EDLC was evaluated by a floating test under severe conditions of voltage and temperature. The results evidence an improvement of the durability of nitrogen-doped activated carbons modified by chemical treatments due to the decrease of detrimental oxygen functionalities and the generation of nitrogen groups with higher electrochemical stability.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrocatalytic activity of calcined manganese ferrite solid nanospheres in the oxygen reduction reaction

  • Flores-Lasluisa, Jhony Xavier
  • Salinas-Torres, David
  • López-Ramón, María Victoria
  • Moreno-Castilla, Carlos
  • Álvarez, Miguel Á.
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
In this study, we synthesized MnFe2O4 solid nanospheres (MSN) calcined at different temperatures (200–500 °C) and MSN-based materials mixed with carbon black, for their use as electrocatalysts in the oxygen reduction reaction (ORR) in alkaline medium (0.1 M KOH). It was demonstrated that the calcination temperature of MSN material determined its chemical surface composition and microstructure and it had an important effect on the electrocatalytic properties for ORR, which in turn was reflected in the performance of MSN/CB-based electrocatalysts. The study revealed that the presence of Mn species plays a key role in the ORR activity. Among tested, MSN200/CB and MSN350/CB exhibited the best electrochemical performances together with outstanding stability.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

On the deactivation of N-doped carbon materials active sites during oxygen reduction reaction

  • Quílez-Bermejo, Javier
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
N-doped carbon materials have been considered one of the most promising options for the replacement of platinum-based electrocatalysts towards the oxygen reduction reaction (ORR). This work provides insights into the deactivation routes of N-doped carbon materials. The changes occurring in the active sites of N-doped carbon catalysts have been analyzed in detail through pre- and post-ORR characterization by XPS of selectively N-doped carbon materials. Moreover, computational modelling was used to deepen into the deactivation mechanism of N-doped carbon materials in the ORR. From XPS and computational modelling, it can be concluded that the deactivation of graphitic-type nitrogen species, during the ORR in both acidic and alkaline environments, occurs through oxidation and tautomerization reactions that result in the formation of N–C–O-type groups. In acidic environment, the reaction kinetics is slower due to the high stability of the ORR intermediates. In alkaline electrolyte, the N–C–O-type groups can be easily formed due to the interaction of graphitic-type N species and the OH− anions from the electrolyte. In this case, the catalytic activity is due to the contribution of both graphitic nitrogen groups and N–C–O species.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Disposable Electrochemical Biosensor Based on the Inhibition of Alkaline Phosphatase Encapsulated in Acrylamide Hydrogels

  • Alacid, Yolanda
  • Quintero-Jaime, Andrés Felipe
  • Martínez-Tomé, María José
  • Mateo, C. Reyes
  • Montilla, Francisco
  • Montilla, Francisco|||/items/b1740d15-1da3-4527-98a4-f6800cea0928
The present work describes the development of an easy-to-use portable electrochemical biosensor based on alkaline phosphatase (ALP) as a recognition element, which has been immobilized in acrylamide-based hydrogels prepared through a green protocol over disposable screen-printed electrodes. To carry out the electrochemical transduction, an electroinactive substrate (hydroquinone diphosphate) was used in the presence of the enzyme and then it was hydrolyzed to an electroactive species (hydroquinone). The activity of the protein within the matrix was determined voltammetrically. Due to the adhesive properties of the hydrogel, this was easily deposited on the surface of the electrodes, greatly increasing the sensitivity of the biosensor. The device was optimized to allow the determination of phosphate ion, a competitive inhibitor of ALP, in aqueous media. Our study provides a proof-of-concept demonstrating the potential use of the developed biosensor for in situ, real-time measurement of water pollutants that act as ALP inhibitors.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Pyrroloquinoline quinone-dependent glucose dehydrogenase bioelectrodes based on one-step electrochemical entrapment over single-wall carbon nanotubes

  • Quintero-Jaime, Andrés Felipe
  • Conzuelo, Felipe
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Development of effective direct electron transfer is considered an interesting platform to obtain high performance bioelectrodes. Therefore, designing of scalable and cost-effective immobilization routes that promotes correct direct electrical contacting between the electrode material and the redox enzyme is still required. As we present here, electrochemical entrapment of pyrroloquinoline quinone-dependent glucose dehydrogenase (PQQ-GDH) on single-wall carbon nanotube (SWCNT)-modified electrodes was carried out in a single step during electrooxidation of para-aminophenyl phosphonic acid (4-APPA) to obtain active bioelectrodes. The adequate interaction between SWCNTs and the enzyme can be achieved by making use of phosphorus groups introduced during the electrochemical co-deposition of films, improving the electrocatalytic activity towards glucose oxidation. Two different procedures were investigated for electrode fabrication, namely the entrapment of reconstituted holoenzyme (PQQ-GDH) and the entrapment of apoenzyme (apo-GDH) followed by subsequent in situ reconstitution with the redox cofactor PQQ. In both cases, PQQ-GDH preserves its electrocatalytic activity towards glucose oxidation. Moreover, in comparison with a conventional drop-casting method, an important enhancement in sensitivity was obtained for glucose oxidation (981.7 ± 3.5 nA mM-1) using substantially lower amounts of enzyme and cofactor (PQQ). The single step electrochemical entrapment in presence of 4-APPA provides a simple method for the fabrication of enzymatic bioelectrodes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Dynamics and Coherence of Photoexcited States in Polyfluorene Films with Ordered Chain Phases

  • Quintero-Jaime, Andrés Felipe
  • Hafed-Khatiri, Salma
  • Huerta Arráez, Francisco
  • Quijada Tomás, César
  • Montilla, Francisco
  • Hafed-Khatiri, Salma|||/items/6c41d1f1-7c4e-4d8c-9ec7-748ec73deba0
  • Montilla, Francisco|||/items/b1740d15-1da3-4527-98a4-f6800cea0928
Understanding the optical and electronic excitations in conjugated polymers, their delocalization, and dynamics is of paramount importance for improving the performance of optoelectronic devices. The structure of the conjugated polymer in solid state, the presence of ordered domains, and conformational subunits strongly affect exciton and polaron interactions. The effect of the crystalline structure of polyfluorene films on exciton dynamics was studied by a combination of electrochemical and spectroscopic methods. Optoelectronic alterations caused by the p-doping process strongly suggest that the electrochemical charge injection occurs mainly in the more ordered β-phase. Evidence for the presence of either α- or β-phases is supported by the different behavior of the fluorescence quenching at increasing doping levels (the quenching elements appear more homogeneously distributed in the α-PFO phase). Estimated singlet exciton coherence lengths indicate that it delocalizes over 20 repeat units in the -PFO phase, but it extends only over 14 units for β-PFO.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Microwave-assisted synthesis of carbon-supported Pt nanoparticles for their use as electrocatalysts in the oxygen reduction reaction and hydrogen evolution reaction

  • Jaimes-Paez, Cristian Daniel
  • Vences-Alvarez, Esmeralda
  • Salinas-Torres, David
  • Morallon, Emilia
  • Rangel-Mendez, José René
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Jaimes-Paez, Cristian Daniel|||/items/ac839a07-b546-4847-9217-c898cb6012b7
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
Pt nanoparticles were incorporated on carbon black (Vulcan XC-72R) and an activated carbon (F400) using a fast and efficient microwave method. For the preparation, a Pt solution was contacted with the corresponding carbon sample and heated up to 110°C in a microwave oven using an optimised heating rate. TEM images revealed that the carbon-supported Pt nanoparticles had a small average particle size and high dispersion. These Pt-based electrocatalysts showed both high electrocatalytic activity and selectivity towards the 4-electron pathway for the oxygen reduction reaction (ORR) in acid and alkaline media. In addition, they presented excellent stability and resistance to CO poisoning. Moreover, the as-prepared electrocatalysts exhibited outstanding electrocatalytic behaviour for the hydrogen evolution reaction (HER). It should be highlighted that, even though our Pt-based electrocatalysts have much lower loadings than that of the commercial Pt/C sample (used as reference), the electroactive surface areas of as-prepared electrocatalysts were higher compared to the reference electrocatalyst. Such small and well-dispersed Pt NPs with an enhanced electroactive surface area and strong interaction with the carbon support, led to an improvement of the current density normalised by Pt loading (A gPt−1).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Controlled synthesis of mono- and bimetallic Pt-based catalysts for electrochemical ethanol oxidation

  • Veizaga, Natalia S.
  • Mendow, Gustavo
  • Quintero-Jaime, Andrés Felipe
  • Berenguer-Murcia, Ángel
  • de Miguel, Sergio
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Poisoning tolerance of Pt-based catalyst is an important parameter for the designing of direct electrochemical fuel cells (EFCs) based on electrooxidation of alcohols (i.e. methanol, ethanol). Applicability of direct ethanol EFCs is still challenging taking into account the lack of effective electrocatalysts which are able to produce high faradic current densities and high stability towards strong adsorption of C1 and C2 oxidation products. As we present here, mono- and bimetallic Pt-based electrocatalysts have been synthesized on a carbon black support for the elecotrooxidation of ethanol in acidic media. Depending of the molar ratio between poly-n-vinylpyrrolidone (PVP, acting as protecting agent) and Pt, nanoparticle size distribution has been controlled, obtaining an optimal condition of Pt loading and electroactive surface area (ECSA) for the PVP/Pt ratio = 1. The electrochemical behavior of electrocatalyst Pt/Re/CB-1 shows a negligible variation in the ECSA (98.3 m2 g−1) in comparison with the monometallic electrodes (90.2 m2 g−1). In contrast, addition of Ir tends to reduce the ECSA by agglomeration of some nanoparticles and decreasing its electrochemical performance. Incorporation of Re in the alloy promotes bond breaking of the intermediates adsorbed on surface, specifically adsorbed C2 molecules, releasing great number of the active sites from the Pt surface, minimizing the deactivation with cycling and providing remarkable stable catalyst with high specific current densities with the addition of small amounts of Re.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Data for the regular article "Exploring the effect of surface chemistry and particle size of boron-doped diamond powder as catalyst and catalyst support for the oxygen reduction reaction"

  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Martínez-Sánchez, Beatriz
  • Gabe, Atsushi
  • Kondo, Takeshi
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

On the mechanism of electrochemical functionalization of carbon nanotubes with different structures with aminophenylphosphonic acid isomers. An experimental and computational approach

  • Martínez-Sánchez, Beatriz
  • Quílez-Bermejo, Javier
  • San-Fabián, Emilio
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Electrochemical functionalization of Single-Walled Carbon Nanotubes and Herringbone Carbon Nanotubes (SWCNTs and hCNTs, respectively) has been successfully performed with aminophenylphosphonic acid isomers by potentiodynamic treatment in oxidative conditions. Exceptional selectivity and control of the functional species embedded into the Carbon Nanotubes (CNTs) have been achieved by carefully optimizing the electrochemical conditions in the functionalization. X-ray photoelectron spectroscopy (XPS) analysis determined a maximum heteroatom incorporation of ca. 2.3-2.6 at. % N and 1.4-1.6 at. % P when 2-aminophenylphosphonic acid (2APPA) is used with both carbon materials, probably because of the linear polymeric growth comparable to that of oligomers derived from aniline (ANI). However, the polymeric product obtained with 4-aminophenylphosphonic acid (4APPA) is much more limited, giving rise to a branched structure. In addition, electrochemical characterization, Raman spectroscopy and electron microscopy suggest that SWCNTs structure facilitates the oligomerization of longer but less stable chains through π-π interactions with the walls of CNTs, while hCNTs promote a more stable attachment according to their heterogeneity and higher reactivity. Computational calculations have confirmed the experimental results obtained, which allow us to shed more light on the mechanisms of the electrochemical functionalization of CNT with phosphorus and nitrogen-containing polymers.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Unlocking the efficiency of low-Cu content metal oxide perovskite for green ammonia synthesis through electrochemical nitrate reduction

  • García-Rodríguez, Mario
  • Dutta, Abhijit
  • Liu, Menglong
  • Broekmann, Peter
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The electrochemical nitrate reduction reaction (e-NO3RR) is gaining attention as a strategy for nitrate removal in wastewater treatment, with the dual benefit of converting harmful nitrates into a valuable chemical resource such as ammonia. However, developing active and selective electrocatalysts remains a critical hurdle for industrial implementation. This work addresses this challenge by exploring perovskite-type metal oxides composed of Mn, Co, and Cu at different Mn:Cu ratios. Our results demonstrated that a low Cu content led to remarkably high Faradaic efficiencies toward ammonia (FENH3), approaching 100% at a potential of –0.3 V vs. RHE in alkaline electrolyte. This finding translated to an ammonia production rate of 1.6 mmol h-1 mgcat-1 cm-2, markedly surpassing the performance of Mn-based electrocatalysts alone. This enhancement was attributed to the formation of hetero-interfacial perovskite crystal structures of La(MnCo)O3 and La2(CuO4), the formation of porous surface morphologies, and enhanced presence of surface oxygen vacancies. The Cu(I)/Cu(II) and Mn(III)/Mn(IV) redox transitions are highlighted as the cause of the improvement related to synergistic effects. Mn centers provide optimal adsorption and activation of nitrate, while adjacent Cu sites facilitate efficient proton transfer through enhanced H2O activation. The samples were also analyzed in neutral medium and presented FENH3 ∼40% at –0.2 V. Notably, the samples exhibited excellent stability under e-NO3RR conditions for 24 h, thereby highlighting their potential for practical applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Determination of exciton diffusion coefficient in conjugated polymer films: Novel method based on spectroelectrochemical techniques

  • Montilla, Francisco
  • Quintero-Jaime, Andrés Felipe
  • Huerta Arráez, Francisco
  • Quijada Tomás, César
  • Montilla, Francisco|||/items/b1740d15-1da3-4527-98a4-f6800cea0928
The understanding of exciton dynamics is a central issue in the operation of conjugated polymer-based optoelectronic devices, like solar cells, light-emitting diodes or electrochemiluminescent cells. In this work, we explore the applicability of combined in situ electrochemical fluorescence and UV-vis spectroscopies for the study of electrochemically induced quenching of photoluminescence as novel tools for the determination of exciton diffusion in a model conjugated polymer, poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylvynilene] (MEH-PPV). It is demonstrated that the quenching process observed upon electrochemical doping follows a linear Stern-Volmer mechanism at low doping levels, with a time-independent rate constant typical of diffusion-controlled annihilation processes. From the Stern-Volmer rate constant and the exciton-polaron critical distance, an exciton diffusion coefficient is derived whose value is in close agreement with those reported in the literature. These results support the suitability of these spectroelectrochemical techniques as fast and powerful alternative tools for the reliable determination of exciton diffusion coefficients in conjugated polymers.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Synthesis and characterization of polymer/V2O5 composites based on poly(2‐aminodiphenylamine)

  • Zenasni, Mouniya
  • Quintero-Jaime, Andrés Felipe
  • Benyoucef, Abdelghani
  • Benghalem, Abderezak
Hybrid materials consisting of aniline (ANI) and/or 2‐aminodiphenylamine (PD) in the presence of V2O5 nanoparticles were synthesized by in‐situ chemical oxidative polymerization in one‐step. Physicochemical and electrochemical characterization confirmed that in the structure of the composites, intercalation between the polymer chains and the V2O5 slabs occurs. Optical properties study shows that the optical band gap of poly(ANI‐co‐PD)/V2O5 is lower than poly‐PD/V2O5. Thermal stability of the composites by thermogravimetric analysis was evaluated. Composites showed electrochemical activity with improved electron‐transfer of the redox species in the polymer observed by cyclic voltammetry. These results highlight the great influence of the V2O5 sheets and the polymer composition on the hybrid materials formation and properties.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

LaNi1-xCoxO3 perovskites for application in electrochemical reactions involving molecular oxygen

  • Flores-Lasluisa, Jhony Xavier
  • Huerta Arráez, Francisco
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
LaNi1-xCoxO3 perovskite materials were synthesized by a sol-gel method for use in electrochemical reactions which involve molecular oxygen. The metal oxides were characterized by different physicochemical techniques and it was observed that the incorporation of Co induces some changes in the surface of the materials that affect the electrocatalytic activity. The different perovskite metal oxides were mixed with carbon black (Vulcan) to improve their electrocatalytic performance. The results from TPR and TPD techniques supported the XPS interpretation suggesting that a stronger interaction between carbon material and metal oxides can be obtained by physically mixing the two materials. This interaction improves the electron transfer and enhances the catalytic activity. Among the as-prepared materials, it was observed that the electrocatalytic performance of LaNi1-xCoxO3 perovskite/Vulcan materials is higher than that of LaNiO3/Vulcan for ORR, but similar towards OER. It is claimed that Co3+ is more catalytic for ORR, while Ni3+ favors the OER. Moreover, the presence of Co stimulates the formation of chemisorbed oxygen species, which also favor the electron transfer. Metal oxides containing both cations show higher stability, being this effect more notorious for OER. LaNi0.5Co0.5O3/Vulcan seems a suitable bifunctional catalyst for both electrochemical reactions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Tailoring Intrinsic Properties of Polyaniline by Functionalization with Phosphonic Groups

  • Martínez-Sánchez, Beatriz
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Phosphonated polyanilines were synthesized by copolymerization of aniline (ANI) with both 2- and 4-aminophenylphosphonic acids (APPA). The material composition and the final properties of the copolymers can be easily tailored by controlling the monomers ANI/APPA molar feed ratio. An important influence on the reactivity of monomers has been found with the substituent position in the ring, leading to differences in the properties and size of blocks of each monomer in the polymer. As expected, while 2APPA shows more similarities to ANI, 4APPA is much less reactive. Phosphorus loading of ~5 at% was achieved in the poly(aniline-co-2-aminophenylphosphonic acid) (PANI2APPA) with a 50/50 molar feed ratio. All the resulting copolymers were characterized by different techniques. Experimental results and density functional theory (DFT) computational calculations suggest that the presence of phosphonic groups in the polymeric chain gives rise to inter- and intra-chain interactions, as well as important steric effects, which induce a slight twist in the substituted PANI structure. Therefore, the physicochemical, electrical, and electrochemical properties are modified and can be suitably controlled.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Exploring the effect of surface chemistry and particle size of boron-doped diamond powder as catalyst and catalyst support for the oxygen reduction reaction

  • Alemany Molina, Gabriel
  • Martínez-Sánchez, Beatriz
  • Gabe, Atsushi
  • Kondo, Takeshi
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The interest for the electrodes based on conductive boron-doped diamond powder (BDDP) is increasing in recent years due to their excellent physical and chemical stability, the wide potential window in both aqueous and organic electrolytes, the relatively large specific surface area, and their versatility in comparison to boron-doped diamond thin film electrodes. These materials have been proposed as alternative cathode catalyst support due to their high corrosion resistance when subjected to the highly positive potentials originated during the start-stop operations in fuel cells, especially in automobiles. In this work, we present three BDDP supports with different particle sizes and different surface oxygen contents as supports of different iron species for oxygen reduction reaction in alkaline solution. BDDP supports were modified with carbon nitride (C3N4) or phthalocyanines (Pc) as anchoring points for iron. The different electrocatalytic performance observed confirmed the strong influence of the surface chemistry of the BDDP supports on the activity of the metallic sites for FePc samples while, for Fe-C3N4 samples, the determining effect was the particle size of the BDDP support. Additionally, DFT calculations were used to obtain some insights about the interaction of the FePc with the diamond surface.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Copper ferrite nanospheres composites mixed with carbon black to boost the oxygen reduction reaction

  • Flores-Lasluisa, Jhony Xavier
  • Salinas-Torres, David
  • López-Ramón, María Victoria
  • Álvarez, Miguel Á.
  • Moreno-Castilla, Carlos
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
Copper ferrite nanospheres (CFNS) were prepared by a solvothermal method and they were calcined at different temperatures ranging from 200−600 °C, resulting in CFNS-based materials with different both surface chemistry and structural features, which play a crucial role in the electrocatalytic activity of carbon black-containing CFNS catalysts towards the oxygen reduction reaction (ORR). The study was addressed to elucidate which kind of crystalline phases, as well as surface chemistry of CFNS were responsible for enhancing the electrocatalytic activity in ORR. The pristine CFNS and CFNS200 (calcined at 200 °C) exhibited cubic spinel, cuprite and copper as main crystalline phases. In the case of CFNS400, it also displays the cubic phase along with a new phase (tenorite). Apart from the tenorite, CFNS600 exhibited hematite, and the cubic phase of spinel shifted to the tetragonal phase. Regarding the electrocatalytic activity in ORR, the CFNS revealed poor activities compared to those of carbon black-containing CFNS catalysts. The high-performing catalyst was CFNS400/Vulcan in terms of current density and onset potential along with its good stability. This improvement may be assigned to both the chemical composition and structure.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

High-Performance and Environmentally Friendly Electrocatalysts: Perovskite, Metal Hexacyanoferrate, and Carbon Composites for Zn-Batteries and Beyond

  • García-Rodríguez, Mario
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
La Tesis Doctoral trata sobre el desarrollo de electrocatalizadores para baterías basadas en Zn y reacciones relevantes para el medioambiente. Se estudia la síntesis, caracterización fisicoquímica y electroquímica de los electrocatalizadores, además de su aplicación en baterías Zn-aire e ion-Zn. En concreto, se han desarrollado materiales compuestos formados por óxidos métalicos del tipo perovskita (de fórmula ABO3) (mediante diferentes métodos de síntesis modificando la relación de los cationes A y B) y materiales carbonosos. Se ha puesto especial énfasis en estudiar la interacción entre ambos componentes, clave en la actividad electrocatalítica final. La mezcla de ambos componentes mediante mecanoquímica, supone la manera más idónea de las estudiadas (hidrotermal, tratamiento térmico y mortero). Seguidamente, se ha desarrollado una síntesis in-situ donde el material carbonoso se genera en el momento de la síntesis sol-gel, obteniendo resultados extraordinarios en términos de electroactividad y estabilidad en la batería Zn-aire. También, se ha estudiado cuál es la causa de la degradación del cátodo en las baterías Zn-aire en la interfase electrocatalizador-capa difusora de carbón a partir de técnicas microscópicas acoplado a un sistema de iones focalizados. Por otro lado, se ha desarrollado un método de síntesis verde de óxidos metálicos de perovskita mediante mecanoquímica, libre de disolventes, siguiendo los parámetros medioambientales de la química verde. Los hexacianoferratos metálicos de zinc mezclados con el material carbonoso en el molino de bolas han sido empleados en la batería ion-Zn obteniendo resultados mejorados que sus homólogos sin material carbonoso y sin molienda. Finalmente, óxidos metálicos del tipo perovskita han sido empleados como electrocatalizadores selectivos hacia la formación de amoníaco (molécula clave para la implantación del hidrógeno como vector energético) en la reducción electroquímica de nitratos.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Preparation of Pt/CNT Thin-Film Electrodes by Electrochemical Potential Pulse Deposition for Methanol Oxidation

  • Quintero-Ruiz, Jose
  • Ruiz-Rosas, Ramiro
  • Quílez-Bermejo, Javier
  • Salinas-Torres, David
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
High-quality performance of catalysts is increasingly required to meet industry exigencies. However, chemical synthesis is often insufficient to maximize the potential properties of the catalysts. On the other hand, electrochemical synthesis has arisen as a promising alternative to overcome these limitations and provide precise control in the preparation of catalysts. In this sense, this work involved the well-controlled electrochemical synthesis of a catalyst based on platinum nanoparticle deposition on carbon nanotubes using only electrochemical treatments. Thin films of functionalized carbon nanotubes were cast onto the surface of a glassy carbon electrode using potential pulsed electrodeposition, resulting in a better distribution of the carbon nanotubes on the electrode when comparing with traditional methods. Then, platinum nanoparticles were electrodeposited on the carbon nanotube-modified electrode. To check the performance of the catalyst and the relevance of the electrochemical synthesis treatments, the samples were analyzed as electrocatalysts towards methanol electrooxidation, showing an important improvement in the catalytic activity in comparison with electrodes that were prepared by traditional methodologies.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Data for the regular article "Few layers graphene-based electrocatalysts for ORR synthesized by electrochemical exfoliation methods"

  • Jaimes-Paez, Cristian Daniel|||/items/ac839a07-b546-4847-9217-c898cb6012b7
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Revisiting the Redox Transitions of Polyaniline. Semiquantitative Interpretation of Electrochemically Induced IR Bands

  • Huerta Arráez, Francisco
  • Quijada Tomás, César
  • Montilla, Francisco
  • Morallon, Emilia
  • Montilla, Francisco|||/items/b1740d15-1da3-4527-98a4-f6800cea0928
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The redox transitions of PANI in acidic medium have been monitored by a combination of cyclic voltammetry, in situ conductance and in situ FTIR spectroscopy. The results of the semiquantitative analysis strongly suggest that the classical tetrameric model of PANI does not satisfactorily describe the actual structures of the polymer at different redox states. An octameric model is revisited, with the inclusion of essential resonant structures, to provide an appropriate prediction of the relative IR intensity changes of the aromatic C-C stretching (at around 1520 cm-1) and the quinoid C=C stretching (at around 1590 cm-1) vibrations observed by FTIR, which are difficult to interpret by considering only 4 aniline rings. Particularly, it is found that the emeraldine state is better described as a resonance hybrid of the classical bipolaronic and semiquinoid (polaron lattice) structures, while most of the charge transferred at the onset of the second voltammetric peak comes from the additional oxidation of this hybrid, which becomes unstable in the electrochemical environment producing mineralization to CO2 and release of soluble quinones.