Pasar al contenido principal

Design and Optimization of Electrochemical Technologies for Environmental Applications

RYC-2017-23618

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced adsorptive properties and pseudocapacitance of flexible Polyaniline-activated carbon cloth composites synthesized electrochemically in a filter-press cell

  • Quijada, César|||0000-0002-9965-9651
  • Bou-Belda, Eva|||0000-0003-1461-9296
  • Leite-Rosa, Larissa
  • Berenguer, Raúl
[EN] Electrochemical polymerization is known to be a suitable route to obtain conducting polymer-carbon composites uniformly covering the carbon support. In this work, we report the application of a filter-press electrochemical cell to polymerize polyaniline (PAni) on the surface of large-sized activated carbon cloth (ACC) by simple galvanostatic electropolymerization of an aniline-containing H2SO4 electrolyte. Flexible composites with different PAni loadings were synthesized by controlling the treatment time and characterized by means of Scanning Electron microscopy (SEM), X-Ray Photoelectron Spectroscopy (XPS), physical adsorption of gases, thermogravimetric analysis (TGA), cyclic voltammetry and direct current (DC) conductivity measurements. PAni grows first as a thin film mostly deposited inside ACC micro- and mesoporosity. At prolonged electropolymerization time, the amount of deposited PAni rises sharply to form a brittle and porous, thick coating of nanofibrous or nanowire-shaped structures. Composites with low-loading PAni thin films show enhanced specific capacitance, lower sheet resistance and faster adsorption kinetics of Acid Red 27. Instead, thick nanofibrous coatings have a deleterious effect, which is attributed to a dramatic decrease in the specific surface area caused by strong pore blockage and to the occurrence of contact electrical resistance. Our results demonstrate that mass-production restrictions often claimed for electropolymerization can be easily overcome., This research was funded by Spanish Ministerio de Economia y Competitividad and FEDER funds, (grants MAT2016-76595-R and RYC-2017-23618) and Generalitat Valenciana (grant PROMETEO/2018/087)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Anodic abatement of glyphosate on Pt-doped SnO2 Sb electrodes promoted by pollutant-dopant electrocatalytic interactions

  • Berenguer, Raúl
  • Fernandez-Aguirre, Maribel G.
  • Beaumont, Samuel
  • Morallón, Emilia
  • Huerta, Francisco|||0000-0002-9791-0355
[EN] The development of non-expensive and efficient technologies for the elimination of Glyphosate (GLP) in water is of great interest for society today. Here we explore novel electrocatalytic effects to boost the anodic oxidation of GLP on Pt-doped (3-13met%) SnO2-Sb electrodes. The study reveals the formation of well disperse Pt nanophases in SnO2-Sb that electrocatalyze GLP elimination. Cyclic voltammetry and in-situ spectroelectrochemical FTIR analysis evidence carboxylate-mediated Pt-GLP electrocatalytic interactions to promote oxidation and mineralization of this herbicide. Interestingly, under electrolytic conditions Pt effects are proposed to synergistically cooperate with hydroxyl radicals in GLP oxidation. Furthermore, the formation of by-products has been followed by different techniques, and the studied electrodes are compared to commercial Si/BDD and Ti/Pt anodes and tested for a real GLP commercial product. Results show that, although BDD is the most effective anode, the SnO2-Sb electrode with a 13 met% Pt can mineralize GLP with lower energy consumption., The authors gratefully acknowledge the EDGJID/2021/330 contract (Generalitat Valenciana, Spain), as well as the RYC-2017-23618 contract and TED2021-131028B I00 project funded by MCIN/AEI/10.13039/ 501100011033 and ESF Investing in your future and European Union NextGeneration EU/PRTR .
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Anodic abatement of glyphosate on Pt-doped SnO2–Sb electrodes promoted by pollutant-dopant electrocatalytic interactions

  • Berenguer Betrián, Raúl
  • Fernández-Aguirre, Maribel G.
  • Beaumont, Samuel
  • Huerta Arráez, Francisco
  • Morallon, Emilia
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The development of non-expensive and efficient technologies for the elimination of Glyphosate (GLP) in water is of great interest for society today. Here we explore novel electrocatalytic effects to boost the anodic oxidation of GLP on Pt-doped (3-13met%) SnO2–Sb electrodes. The study reveals the formation of well disperse Pt nanophases in SnO2–Sb that electrocatalyze GLP elimination. Cyclic voltammetry and in-situ spectroelectrochemical FTIR analysis evidence carboxylate-mediated Pt-GLP electrocatalytic interactions to promote oxidation and mineralization of this herbicide. Interestingly, under electrolytic conditions Pt effects are proposed to synergistically cooperate with hydroxyl radicals in GLP oxidation. Furthermore, the formation of by-products has been followed by different techniques, and the studied electrodes are compared to commercial Si/BDD and Ti/Pt anodes and tested for a real GLP commercial product. Results show that, although BDD is the most effective anode, the SnO2–Sb electrode with a 13 met% Pt can mineralize GLP with lower energy consumption.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Oxidation of Different Microporous Carbons by Chemical and Electrochemical Methods

  • Berenguer Betrián, Raúl
  • Morallon, Emilia
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The functionalization of high surface area microporous carbon materials by oxidative treatments receives great interest for multiple applications. The micropore structure of the material and the oxidation method could play an important role in the process. In this work, we analyze and compare the effects of liquid-phase chemical and alternative electrochemical oxidation treatments in the textural and chemical properties of four microporous carbon materials, namely a granular-, cloth-, and powder-like activated carbon (AC) and a powdery zeolite templated carbon (ZTC). Particularly, we provide new data on oxidation kinetics and changes on microporosity and surface chemistry of various microporous carbons. Characterization techniques reveal that the extent, textural changes, and selectivity of the oxidation greatly depend on the type of microporous material and the oxidation method. The incorporation of surface oxygen groups (SOGs) generally causes a more-or-less significant decrease in the measured micropore volume and the specific surface area. In the studied ACs, the extent of oxidation and BET surface area reduction augment with their micropore volume, and the textural changes seem to be governed by the micropore blockage by SOGs. The disordered microporous structure of these materials is then quite robust toward oxidation, but its heterogeneity may contribute to the lack of selectivity during this process. By contrast, the regular micropore framework of the ZTC is rapidly destroyed even under soft oxidizing conditions, but it is proposed to promote certain selectivity during oxidation. The high reactivity and structural fragility of ZTC are assigned to the weak interconnections and large number of exposed edge sites in its structure. Our results demonstrate the fast oxidation rate of chemical treatments under different conditions, especially in the case of ZTC, what is proposed to restrict the control and to limit the oxidizability and selectivity of these functionalization processes. Contrarily, the electrochemical treatments are proved to better control the kinetics of oxidative functionalization, what may explain the observed higher efficiency and selectivity for SOGs introduction and the minimization of degradation in fragile microporous structures.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Evaluating bioelectrochemically-assisted constructed wetland (METland®) for treating wastewater: Analysis of materials, performance and electroactive communities

  • Prado, Amanda
  • Berenguer Betrián, Raúl
  • Esteve-Núñez, Abraham
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
METland® technology consists of a bioengineering strategy for treating wastewater by integrating microbial electrochemical concepts into constructed wetland systems to enhance pollutants removal. In this context, we have constructed planted (Iris sibirica) biofilters to assess the impact of different electrically conductive bed materials (electroconductive coke, electroconductive biochar, non-electroconductive biochar and gravel) by analyzing the (i) wastewater treatment efficiency (COD and nitrogen removal), (ii) bioelectrochemical response, and (iii) diversity of microbial communities. Electrically conductive materials outperformed non-conductive ones allowing removal rates as high as 175-180 gCOD/bed*m3 day capable to support footprint as low 0.4 m2/pe. In contrast, the highest nitrogen removal rates were achieved with non-conductive biochar in presence of plants (80 %) regardless the anoxic conditions of the assay. This was confirmed by the presence of annamox bacteria like Planctomycetes. Furthermore, the presence of a marked electric potential profile along the bed height in electroconductive materials together with redox pairs (cyclic voltammetry analysis) demonstrated an effective electron flow from bottom to uppermost layers of the bed (geoconductor mechanism). In electroconductive biochar, such effective conductivity-based model co-exists with a geobattery mechanism due to presence of electroactive phenolic and carbonyl/quinone groups and/or microporosity. Microbial biodiversity analysis revealed the impact of plants just at the upper layers of the biofilters where roots and Rhizobium predominate. Bacteria from genus Clostridium were dominant in gravel inert material; in contrast, bacteria from genus Geobacter (12%) and Trichococcus (30%) outcompete the rest of communities for an effective colonization of carbonaceous beds, suggesting their main role as part of the electrosyntrophies mechanism after METland®.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrochemistry and study of indirect electrocatalytic properties of a novel organometallic Schiff base nickel(II) complex

  • Ourari, Ali
  • Aggoun, Djouhra
  • Karce, Houssam Eddine
  • Berenguer Betrián, Raúl
  • Morallon, Emilia
  • Lanez, Touhami
  • Ouennoughi, Yasmina
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
This paper explores the synthesis, characterization and electrocatalytic behavior of a new ferrocenyl-substituted tetradentate Nickel Schiff base complex. The complex, N,N-Bis[5-(N,N-ferrocenmethylaminophenyl)methylsalicylidyne]-1,2-diaminoethane of nickel(II) ((Fc-Me-Ani)2-LNiII), was prepared by heating the tetradentate Schiff base ligand ((Fc-Me-Ani)2-H2L) in the presence of a stoichiometric amount of tetrahydrate nickel(II) acetate salt, dissolved in a mixture of ethanol and methylene chloride at 50°C under N2 atmosphere. The molecular structure of the complex was deduced from elemental analysis, FT-IR, UV-Vis and mass spectrometry. The electrochemical characterization was investigated by cyclic voltammetry on a glassy carbon electrode and the effect of the solvent (methylenechloride (DCM), dimethylformamide (DMF) and dimethylsulfoxide (DMSO)) was analyzed. The electrochemical characterization of the nickel complex reveals the electron-transfer capability of the two electroactive redox moieties, ie. the ferrocenyl moieties (Fc+‏/Fc) and the metallic centre (Ni2+/Ni+). The diffusion coefficient (D) and the standard rate constant (K0) have also been calculated from the cyclic voltammetry and the polarization curves of ferrocenyl redox process. So, they are influenced by both used method and medium. Cyclic voltammetry has also been performed to examine the performances of the electrocatalytical reduction reaction towards two alkylhalides like ethyl chloroacetate and ethyl bromoacetate in DMF solution. The current increase and the cathodic shift of the Ni2+→Ni+ reduction process in the presence of increasing concentrations of these alkyl halides evidence the catalytic effect of the (Fc-Me-Ani)2-LNiII complex in the reduction of these compounds.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Combined ozonation process and adsorption onto bentonite natural adsorbent for the o-cresol elimination

  • Taleb, Zoubida
  • Ramdani, Amina
  • Berenguer Betrián, Raúl
  • Ramdani, Nadia
  • Adjir, Mehdi
  • Taleb, Safia
  • Morallon, Emilia
  • Nemmich, Said
  • Tilmatine, Amar
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
This work studies the removal of o-cresol from wastewater by using ozonation followed by adsorption onto sodium natural bentonite (Na-Bent). The degradation of o-cresol was followed by UV-Vis. During ozonation, 2-methylbenzoquinone (2-mBQ) and 2-methylhydroquinone (2-mHQ) were identified as two of the main by-products, while the pH decrease suggested the breakage of aromatic compounds into smaller organic acids. After 30 min treatment, the o-cresol degradation for 250–62.5 mg/L solutions was found between 64–85%, respectively. Next, the wastewater containing persistent o-cresol and by-products was contacted with Na-Bent adsorbent. The solutions and physicochemical properties of Na-Bent were analysed, before and after adsorption, by UV-Vis, FTIR, XRD and N2 adsorption-desorption. Moreover, equilibrium and kinetic experiments were carried out to study the adsorptive properties of the Na-Bent. While sole ozonation or adsorption failed on the remediation of o-cresol solutions, the obtained results show that the contact of ozonated solutions with Na-Bent led to almost total removal of the o-cresol initial concentrations (between 96% and 99%). This excellent performance is assigned to the high volume of interlayer micropores and the suitable surface chemistry of this natural adsorbent.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhanced Adsorptive Properties and Pseudocapacitance of Flexible Polyaniline-Activated Carbon Cloth Composites Synthesized Electrochemically in a Filter-Press Cell

  • Quijada Tomás, César
  • Leite-Rosa, Larissa
  • Berenguer Betrián, Raúl
  • Bou-Belda, Eva
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
Electrochemical polymerization is known to be a suitable route to obtain conducting polymer-carbon composites uniformly covering the carbon support. In this work, we report the application of a filter-press electrochemical cell to polymerize polyaniline (PAni) on the surface of large-sized activated carbon cloth (ACC) by simple galvanostatic electropolymerization of an aniline-containing H2SO4 electrolyte. Flexible composites with different PAni loadings were synthesized by controlling the treatment time and characterized by means of Scanning Electron microscopy (SEM), X-Ray Photoelectron Spectroscopy (XPS), physical adsorption of gases, thermogravimetric analysis (TGA), cyclic voltammetry and direct current (DC) conductivity measurements. PAni grows first as a thin film mostly deposited inside ACC micro- and mesoporosity. At prolonged electropolymerization time, the amount of deposited PAni rises sharply to form a brittle and porous, thick coating of nanofibrous or nanowire-shaped structures. Composites with low-loading PAni thin films show enhanced specific capacitance, lower sheet resistance and faster adsorption kinetics of Acid Red 27. Instead, thick nanofibrous coatings have a deleterious effect, which is attributed to a dramatic decrease in the specific surface area caused by strong pore blockage and to the occurrence of contact electrical resistance. Our results demonstrate that mass-production restrictions often claimed for electropolymerization can be easily overcome.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

The generation of hydroxyl radicals and electro-oxidation of diclofenac on Pt-doped SnO2–Sb electrodes

  • Fernández-Aguirre, Maribel G.
  • Berenguer Betrián, Raúl
  • Beaumont, Samuel
  • Nuez, Montserrat
  • La Rosa-Toro, Adolfo
  • Peralta-Hernández, Juan Manuel
  • Morallon, Emilia
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Pt-doped SnO2–Sb electrodes constitute promising candidates for the electrochemical abatement of refractory pollutants, but their efficacy to oxidize emerging pollutants remains uncertain. In this work, the electrochemical oxidation of diclofenac, pharmaceutical pollutant, on Pt-doped Ti/SnO2–Sb electrodes has been studied by cyclic voltammetry and galvanostatic treatment in neutral medium. In parallel, the capability of these anodes to generate hydroxyl radicals (OHs) has been analyzed by in-situ UV spectroelectrochemical measurements. For comparison purposes, the responses of Ti/SnO2–Sb and commercial Ti/Pt and BDD anodes were also evaluated. The voltammetric and electrolysis results show that the different Ti/SnO2–Sb anodes can effectively oxidize and mineralize diclofenac, so their electrochemical activity lies in between that of Ti/Pt and BDD. The incorporation of small amounts of Pt (3–13 at.%) into the SnO2–Sb coatings, despite hindering the OHs generation, enhances the kinetics and efficiency for diclofenac oxidation and mineralization. This better overall response is attributed to a synergy between diclofenac-Pt interaction and efficient OHs generation. Pt-doped Ti/SnO2–Sb electrodes are then presented as a cheaper potential alternative to BDD for treating pharmaceutics pollutants in waters.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Preparation and Characterization of Montmorillonite/PEDOT-PSS and Diatomite/PEDOT-PSS Hybrid Materials. Study of Electrochemical Properties in Acid Medium

  • Kiari, Mohamed
  • Berenguer Betrián, Raúl
  • Montilla, Francisco
  • Morallon, Emilia
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
  • Montilla, Francisco|||/items/b1740d15-1da3-4527-98a4-f6800cea0928
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The hybridization of clay minerals with conducting polymers receives great interest for different potential applications, including environmental remediation. This work studies and compares the electrochemical properties of two different clays, montmorillonite (Mont) and diatomite (Diat), and their respective clay/PEDOT-PSS hybrid materials in H2SO4 medium. The hybrid materials were prepared by electropolymerization of EDOT in the presence of PSS. The physico-chemical and electrochemical properties of both clays were analyzed by different techniques, and the influence of the clay properties on electropolymerization and the electroactivity of the resulting clay/PEDOT-PSS hybrids was investigated. Specifically, the Fe2+/Fe3+ redox probe and the oxidation of diclofenac, as a model pharmaceutical emerging pollutant, were used to test the electron transfer capability and oxidative response, respectively, of the clay/PEDOT-PSS hybrids. The results demonstrate that, despite its low electrical conductivity, the Mont is an electroactive material itself with good electron-transfer capability. Conversely, the Diat shows no electroactivity. The hybridization with PEDOT generally enhances the electroactivity of the clays, but the clay properties affect the electropolymerization efficiency and hybrids electroactivity, so the Mont/PEDOT displays improved electrochemical properties. It is demonstrated that clay/PEDOT-PSS hybrids exhibit diclofenac oxidation capability and diclofenac concentration sensitivity.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electroactive Biochar for Large-Scale Environmental Applications of Microbial Electrochemistry

  • Schievano, Andrea
  • Berenguer Betrián, Raúl
  • Goglio, Andrea
  • Bocchi, Stefano
  • Marzorati, Stefania
  • Rago, Laura
  • Louro, Ricardo O.
  • Paquete, Catarina M.
  • Esteve-Núñez, Abraham
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
Large-scale environmental applications of microbial electrochemical technologies (MET), such as wastewater treatment, bioremediation, or soil improvement, would be more feasible if bioelectrodes could be fabricated with simpler materials. Biochar with potentially improved electroactive properties (e-biochar) can be an ideal candidate for this scope, being at the same time widely available, biocompatible, and fully recyclable at its end-of-life as a soil amendment. Here we review the application of biochar to MET, to set benchmarks aimed at tuning the electroactive properties of such materials from the point of view of MET. The precursor biomass, thermochemical process conditions, and pre-, in situ-, and/or post-treatments should tailor optimized combinations of electrical conductivity, capacitance, superficial redox-active and electroactive functional groups, porosity distribution, and capacity to host electroactive microbial communities. We also discuss methods to rigorously characterize e-biochar properties and the most relevant multidisciplinary research challenges toward its application in large-scale MET.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Maghnite‐H+ Catalytic Synthesis and Characterization of Polyindenes and Oxidized Derivatives

  • Marref, Mohamed
  • Berenguer Betrián, Raúl
  • Morallon, Emilia
  • Meghabar, Rachid
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
This work presents a comprehensive study on the physico‐chemical and electrochemical properties of polyindenes (PIns) synthesized by Maghnite‐H+‐catalysed polymerization of indene (benzocyclopentadiene) in CH2Cl2 at different temperatures, and their oxidative derivatives by subsequent treatment with FeCl3. The polymers are characterized by TG, FT‐IR, XPS and UV‐vis spectroscopies, as well as electrical conductivity and voltammetric measurements, analysing the influence of synthesis temperature and post‐oxidation. Results show that the PIns synthesized at different temperatures present quite similar thermogravimetric behavior and UV spectra. Nevertheless, FTIR and XPS reveal significant differences in chemical composition and polymer structure depending on this temperature. At higher temperatures, indenyl coupling proceeds via 1,2 carbon atoms to obtain more compact and less defective PIns with higher yields. At lower temperatures, polymerization through 1,3 carbon atoms may also occur, leading to polymers with a larger number of defects and oxygen functionalities and lower yields. FeCl3 treatment causes the introduction of some oxygen functionalities in the compact PIn60 and PIn80 polymers, without significantly affecting their molecular structure and electrical conductivity. Finally, cyclic voltammetry demonstrates that, despite not electro‐active, these partially oxidized PIns show enough electrical conductivity for different applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Synthesis and characterization of a novel non-symmetrical bidentate Schiff base ligand and its Ni(II) complex: electrochemical and antioxidant studies

  • Bougossa, Imène
  • Aggoun, Djouhra
  • Ourari, Ali
  • Berenguer Betrián, Raúl
  • Bouacida, Sofiane
  • Morallon, Emilia
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
This paper describes the synthesis and properties of a new nitro-substituted bidentate Schiff base ligand (HL) and its nickel complex (Ni(II)-2L). Its ligand was derived from the condensation of 2′-methoxyphenyl-2-ethylamine with 5-nitro-2-hydroxybenzaldehyde. This ligand and its nickel complex were characterized through elemental analysis, UV–Vis, IR, 1H NMR and 13C NMR. The molecular structure of the nickel complex was confirmed using single-crystal X-ray diffraction. This complex crystallizes in dichloromethane in triclinic system, space group of P-1 with a = 6.6803 (2), b = 9.6702 (2), c = 12.1836 (3) and 1 formula unit in the cell. The obtained data revealed that the Ni(II) center is tetra-coordinated by two oxygen and two nitrogen atoms involving two ligands. Cyclic voltammograms of the nickel complex, recorded in DMF solutions, showed one quasi-reversible redox couple related to the Ni(II)/Ni(I) couple, demonstrating its electro-activity. This indicates a slow redox transition and/or electron exchange process, which implies that this electrochemical process is mainly diffusion-controlled. The antioxidant activity of the synthesized compounds was evaluated from the reactivity with the free radical DPPH, showing IC50 values between 0.4 and 4.5 mg/mL.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Carbon-supported VPO catalysts with fibrous structure: A new family of catalysts for partial oxidation reactions

  • Guerrero-Pérez, María Olga
  • Berenguer Betrián, Raúl
  • Ford, Michael E.
  • Wachs, Israel E.
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
The present contribution describes the synthesis of a carbon supported VPO catalyst with a fibrous structure. The synthesis method is simple, low-cost, scalable and reproducible that allows the formation of the bulk mixed oxide (VO)2P2O7 (VPP) active phase on the carbon support material. The preparation does not require any special reducing thermal treatments due to the ability of the carbon support to stabilize the VPP active phase since this carbon-based support is stable under oxidizing conditions up to around 400ºC allowing it to be used as for catalytic oxidation reactions. The stability of the carbon-supported VPP catalyst under reaction conditions was examined with in situ Raman under oxidizing/ H2 reducing cycles and n-butane oxidation conditions under both wet and dry conditions. These studies confirm the dynamic character of VPO phases, which interconvert under different conditions, and the stability of carbon-supported VPP phase under different environments. The novel carbon-supported catalyst exhibits an activity behavior like that observed for commercial catalysts that suggests a very promising catalytic material.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Study of the influence of nanoscale porosity on the microbial electroactivity between expanded graphite electrodes and Geobacter sulfurreducens biofilms

  • Ramirez-Moreno, Marina
  • Berenguer Betrián, Raúl
  • Ortiz, Juan M.
  • Esteve-Núñez, Abraham
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
Expanded graphite (EG) electrodes gather several advantages for their utilization in microbial electrochemical technologies (MET). Unfortunately, the low microbial electroactivity makes them non-practical for implementing them as electrodes. The objective of this work is to explore the enhancement of microbial electroactivity of expanded graphite (commercial PV15) through the generation of nanopores by CO2 treatment. The changes in properties were thoroughly analysed by TG, XRD, Raman, XPS, gas adsorption, SEM and AFM, as well as microbial electroactivity in the presence of Geobacter sulfurreducens. Nanopores remarkably enhance the microbially derived electrical current (60-fold increase). Given the inaccessibility of micron-sized bacteria to these nanopores, it is suggested that the electric charge exchanged by electroactive microorganisms might be greatly affected by the capability of the electrode to compensate these charges through ion adsorption. The increased microbial current density produced on activated PV15 opens the possibility of using such materials as promising electrodes in MET.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Synthesis, characterization and DFT investigation of new metal complexes of Ni(II), Mn(II) and VO(IV) containing N,O-donor Schiff base ligand

  • Aggoun, Djouhra
  • Messasma, Zakia
  • Bouzerafa, Brahim
  • Berenguer Betrián, Raúl
  • Morallon, Emilia
  • Ouennoughi, Yasmina
  • Ourari, Ali
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
In this work, a bidentate Schiff base ligand (HL) containing N and O as donor heteroatoms has been used to synthesize series of new stable metal complexes of general composition of M(L)2 with M = Mn, Ni and VO. This ligand was obtained from condensation of 2-methoxybenzylamine on 2,3-dihydroxybenzaldehyde in methanolic solutions in which its complexes were obtained by mixing the corresponding metal acetate salt and the ligand in 1:2 molar ratio. The resulting three complexes have been characterized by different analytical techniques like FT-IR, UV-Vis, mass spectroscopy, thermogravimetry and cyclic voltammetry, to identify their molecular structures and redox/electrochemical properties. Moreover, the effect of the metal on the complexes electronic properties with their reactivity has also been studied by Density Functional Theory (DFT). The stable structures were optimized by using the hybrid B3LYP/6–31 G method. The spectroscopic data obtained suggest that the metal is bonded to the ligand through the phenolic-like oxygen and the imine-type nitrogen atoms. Electronic and vibrational absorption spectra of the nickel complex was found to be of square-planar geometry while square-pyramidal and octahedral geometries have been proposed for VO(IV) and Mn(II) complexes, respectively. The thermogravimetric analyses of these complexes confirmed the presence of water molecules in their structures and thermal decomposition led to the formation of metal oxides as the latest residues. The voltammogram of the Ni(II) complex suggests the existence of quasi-reversible redox system in DMSO solution.