Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of the stability of LTA zeolites under natural gas drying TSA conditions

  • Moura, P.A.S.
  • Ferracine, E.D.S.
  • Rodríguez-Aguado, E.
  • Maia, D.A.S.
  • Melo, D. C.
  • Cardoso, D.
  • Bastos-Neto, M.
  • Rodríguez-Castellón, E.
  • Azevedo, D.C.S.
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] The main features in cationic LTA zeolites that are likely to impact its potential hydrothermal stability are interconnected. The Al content and the compensating cation play an important role in the water adsorption but their influence on the zeolite performance in thermal cycles is yet to be understood. In this study, four LTA zeolite samples were synthetized with distinct Si/Al ratios in sodium and potassium forms. They underwent a Premature Aging Protocol (PAP) that took into account the operating conditions typically found in temperature swing adsorption processes. The Si/Al ratio per se did not impact in the crystallinity upon aging, but the presence of a high amount of potassium cations (Si/Al = 1) led to the amorphization of the zeolite structure. The results from XPS and NMR techniques indicate the Al migration from the outer surface to the inner cages occurs upon aging. Chemical analysis by XRF and ICP-OES associated with 27Al NMR analysis reveal that the presence of EFAl is particularly significant in the sample with the largest Si/Al ratio (5) and is correlated to a much larger C deposition upon aging. TG/DTG and TPD-NH3 experiments suggest that acid sites in the zeolite structures act as a double-edged sword, by enhancing water adsorption while also leading to carbon accumulation. CO2 isotherms at 0 oC reveal the reduction of the microporosity after aging, whereas the Al content is proportional to the water adsorption uptake, particularly at low pressures (below 10 mbar). The material with an intermediate Si/Al ratio and in Na-form (LTAc-SiAl2-Na) combines excellent hydrothermal stability with a high-water affinity and uptake., The authors acknowledge financial support from Petrobras (Brazil) project 2018/00130-5, CAPES (Brazil), particularly in the frame of project CAPES/Print 88887.311867/2018-00 and Servicios Centrales de Apoyo a la Investigacion - SCAI. S.V. and F. R. acknowledge financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033 and TED2021-130191B-C41 and TED2021-130756B-C31 grants funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGenerationEU/PRTR). Authors thank also the financial support by the Generalitat Valenciana (Prometeo 2021/077). This study forms part of the Advanced Materials programme and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047 and MFA/2022/012).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The role of promoters on the catalytic performance of MxV2O5 bronzes for the selective partial oxidation of H2S

  • Ruiz-Rodríguez, Lidia
  • Vidal Moya, José Alejandro
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • De Arriba-Mateos, Agustín
  • Rodríguez-Castellón, Enrique
[EN] Metal-containing vanadium oxide bronzes (MxV2O5; M= Cu, Ag and Ca) have been prepared, characterized (before and after reaction) by various physicochemical techniques, and tested in the partial oxidation of H2S. The catalysts were prepared hydrothermally at 175 ¿C (from gels containing M/V molar ratios of 0.17 or 0.33) and heat-treated at 500 ¿C/2 h in N2. The most effective catalysts, showing a sulfur selectivity greater than 95 % for a H2S conversion beyond 90 %, were those presenting vanadium oxide bronze (ß-Cu0.261V2O5 or Ag0.333V2O5) as the main crystalline phase. Cu- and Ag-containing vanadium oxide bronzes were stable under reaction conditions. For calcium containing materials (mainly presenting the Ca0.17V2O5 bronze phase), the formation of CaSO4 has been observed during the reaction, which resulted in a negative effect on both activity and selectivity. The nature of active and selective sites in this type of catalysts, as well as the role of promoters, are also discussed., The authors would like to acknowledge the Ministerio de Ciencia e Innovacion of Spain (TED2021-130756B-C31, TED2021-130756B-C32 and MAT2017-84118-C2-1-R projects) . Authors from ITQ also thank Project SEV-2016-0683 for supporting this research. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329) and Dr. Ferran Sabate from ITQ for his assistance with the EPR data treatment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic activation of N2O on promoted NiO based materials: Valorization by oxidative dehydrogenation of ethane

  • Sánchez-García, G.
  • Pérez-Calvo, A.
  • Sánchez-Tovar, R.
  • Dejoz, A.M.
  • Solsona, B.
  • Moreno-Torralbo, Beatriz Maria
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] N2O-assisted Oxidative Dehydrogenation (ODH) of ethane is an interesting way of simultaneously obtaining a highly valuable raw material (ethylene) and the functionalization of a greenhouse gas (N2O). Unfortunately, over most of the catalytic systems, this reaction presents two main drawbacks: i) high yields to ethylene have hardly been reported; and ii) the catalytic activity highly decreases when replacing molecular oxygen by N2O. In the present article, it will be shown that with promoted NiO catalysts, and using N2O, high activity, comparable with that of conventional O2-assisted ODH of ethane, is achieved. Furthermore, the use of the appropriate dopant, such as niobium, allows high ethylene yields (40 %), with a selectivity to ethylene of 72 % at 55 % ethane conversion. Overall, the catalytic results obtained indicate that the presence/absence and the nature of the promoter determines the catalytic performance of NiO based catalysts and the selectivity to ethylene can be explained on the basis of the electrochemical properties of the catalysts, correlating with parameters such as the density of acceptor defects (cationic vacancies) and the charge-transfer resistance at the interfacial active sites of the catalysts. Interestingly, the most selective catalyst (i.e., Nb-doped NiO) is highly robust as it presents stable catalytic performance after 24 h online and Ni2+ species are not reduced to Ni0 even working at high temperatures in N2O-free conditions., The funding received for this study from the Spanish Ministry of Science and Innovation, projects PID2021-126235OB-C31 and PID2021-126235OB-C33 (funded by MCIN/AEI/10.13039/501100011033 and FEDER funds) and projects TED2021-130756B-C31 and TED2021-129555B-I00 (funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGenerationEU/PRTR) , is acknowledged. BMT, PC, and JMLN also thank CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033. G. Sanchez-Garcia is also grateful to the Generalitat Valenciana (CIACIF/2021/010) and A. Perez-Calvo to Ministerio de Ciencia, Innovacion y Universidades (FPU23/02557) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modulation of the Acidity of HY, HBETA, and HZSM-5 Zeolites by Lanthanum Incorporation for Selective Gasoline Desulfurization in the FCC Riser

  • Santos, Ronaldo C.
  • Almeida, Daniel F.
  • Silva, Anderson C. dos S.
  • Lam, Yiu L.
  • Ferreira, Jose M. M.
  • Ballesteros-Plata, D.
  • Rodríguez-Castellón, E
  • Pontes, Luiz A. M.
  • MARTINEZ FELIU, AGUSTIN|||0000-0002-9974-1567
[EN] This study evaluates the incorporation of lanthanum into zeolites Y, Beta, and ZSM-5 to promote the desulfurization of a gasoline stream directly in the riser of a fluid catalytic cracking (FCC) process. The catalysts were prepared using wet impregnation and characterized by X-ray diffraction (XRD) (crystallinity and phase integrity), XRF (La content and Si/Al ratio), X-ray photoelectron spectroscopy (XPS), solid state nuclear magnetic resonance (NMR) of 2(9)Si and 2(7)Al, N2 adsorption, high-resolution transmission electron microscopy (HRTEM), temperature-programmed desorption of ammonia (TPD-NH3), Fourier-transform infrared spectroscopy (FTIR), and pyridine chemisorbed FTIR (FTIR-Py). Catalytic tests were conducted in a tubular reactor, using a mixture of cyclohexane and thiophene (20000 ppm) at 773 K and 1.3 atm. Catalytic activity was assessed in a fixed-bed reactor using a cyclohexane/thiophene feed, and product selectivities were quantified by gas chromatography with flame ionization and sulfur chemiluminescence detectors. The addition of lanthanum altered the acidity of the catalysts, reducing the total density of acid sites while increasing the strength of Lewis acid sites. The protonated zeolites, particularly HY, facilitated sulfur removal, achieving a 91% selectivity for H2S through secondary hydrogen transfer reactions. In contrast, the lanthanum-modified zeolites enhanced thiophene alkylation and condensation reactions, as evidenced by the selectivity observed in La/BEA and La/ZSM-5, which reached 15%. The results indicated that incorporating lanthanum changes the desulfurization profile, making the catalysts more selective for forming higher molecular weight sulfur compounds, thereby shifting the products toward the FCC diesel range. The modulation of acidity and structural accessibility of the zeolites proves crucial in converting sulfur compounds into H2S or heavy sulfur compounds in the FCC riser, leading to a reduction in the sulfur content of the gasoline fraction, which is economically advantageous., The authors are grateful for financial support from the Instituto Brasileiro de Tecnologia e Regulacao (IBTR), Fabrica Carioca de Catalisadores FCC S.A., Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq)-Programa de Doutorado para Inovacao-DAI and Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior (CAPES)-Programa CapesPrint, and Programa de Recursos Humanos da Agencia Nacional do Petroleo, Gas Natural e Biocombustiveis (PRH/ANP-PRH36/UFBA), supported by resources from the investment of oil companies qualified in the PD&I Clause of ANP Resolution No. 50/2015 ANP n degrees 50/2015. Enrique Rodriguez-Castellon and Daniel Ballesteros-Plata acknowledge the support from the Ministry of Science and Innovation (MSI/MCIN) of Spain through the research projects PID2021-126235OB-C32 and TED2021-130756B-C31, funded by MCIN/AEI/10.13039/501100011033 and, where applicable, co-financed by the European Regional Development Fund (ERDF) "A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The selective ethanol Guerbet condensation over alkali metal-doped sepiolite

  • Balestra, Giulia
  • De Maron, Jacopo
  • Tabanelli, Tommaso
  • Cavani, Fabrizio
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] In this study, alkali metal-doped sepiolite based catalysts were developed for the up-grading of ethanol through the Guerbet reaction mechanism. The catalysts were prepared by wetness impregnation with aqueous solution containing alkali metal precursors salts over calcined sepiolite, and finally activated at 500 & DEG;C in air. The catalysts have been characterized by XRD, SEM-EDS, TGA-DSC, N2-adsorption. In addition, TPD-CO2 and TPD-NH3 were used to determine the acid and basic characteristics of catalysts. The catalysts were tested into a quartz continuous gas-flow reaction system working at atmospheric pressure to investigate the effects of metal loading (wt%), the nature of the alkali metals and of the main reaction parameters (e.g., reaction temperature, weight hourly space velocity), on the production of n-butanol starting from ethanol. The highest yield (18%) was ob-tained at 400 & DEG;C with the catalyst consisting in sepiolite, calcined at 500 & DEG;C, impregnated with 7 wt% of Cs. This study proves that ad hoc modified natural sepiolites with alkali metals are effective catalysts for the Guerbet upgrading of ethanol., The authors would like to acknowledge the Ministerio de Ciencia e Innovacion of Spain (TED2021-130756B-C31).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Desulfurization reactions of thiophene and cyclohexane over Zn and Nb modified zeolites in FCC process

  • Almeida, D.F.
  • Santos, R.C.
  • Lam, Y.L.
  • Ferreira, J.M.M.
  • Rodríguez Castellón, Enrique
  • Ballesteros-Plata, D.
  • Lázaro-Martínez, J.M.
  • Pontes, I.A.M.
  • MARTINEZ FELIU, AGUSTIN|||0000-0002-9974-1567
  • Arribas Viana, Maria De Los Desamparados|||0000-0002-5761-288X
[EN] In refineries, one of the most important production units is Fluid Catalytic Cracking (FCC). In them, the incorporation of additives to the catalyst is a very interesting option to reduce the sulfur content of gasoline, and thus obtain commercial fuel specifications. In this study, the transformation of thiophene into a cyclohexane (HC) stream for its in-situ desulfurization has been investigated, using catalysts based on niobium or zinc (6 wt%) incorporated into three types of zeolites: HUSY, HBeta and HZSM-5. Catalytic tests were carried out at 773 K in an automatically controlled fixed-bed tubular reactor. The reaction products were analyzed online by gas chromatography, with FID detector for hydrocarbons and SCD for sulfur compounds, and the catalysts were characterized by XRD, FTIR, N2 adsorption isotherms, HRTEM, XRF, 29Si and 27Al solid state NMR, NH3-TPD and FTIR-pyridine techniques. The results indicate that the addition of metals did not significantly alter the textural and structural properties of the zeolites, and that the Nb/HB and Nb/HY catalysts were the most effective in the conversion of thiophene, and selective toward paraffins and H2S mainly. The performance of these materials was attributed to the existence of an optimal balance between the Brønsted and Lewis acid sites, which increased the hydrogen transfer coefficient (HTC) during the cyclohexane transformation, resulting in higher desulfurization activity. The addition of zinc drastically increased the density of the Lewis acid sites and decreased the HTC, favoring the production of aromatics and thiophene condensation reactions, thus transferring sulfur to the gasoline streams. In general, the catalysts investigated are of significant interest as additives for sulfur reduction in FCC gasoline streams, either by producing easily removable H2S or by transferring sulfur to heavier fractions., The authors are grateful for financial support from the Instituto Brasileiro de Tecnologia e Regulaca o (IBTR) , Fabrica Carioca de Cata-lisadores FCC S.A., Conselho Nacional de Desenvolvimento Cientifico e Tecnolo gico (CNPq) -Programa de Doutorado para Inovaca o - DAI and Coordenaca o de Aperfeicoamento de Pessoal de Nivel Superior (CAPES) -Programa CapesPrint, and Programa de Recursos Humanos da Age ncia Nacional do Petro leo, Ga s Natural e Biocombustiveis (PRH/ANP - PRH36/UFBA) , supported by resources from the investment of oil companies qualified in the PD &I Clause of ANP Resolution No. 50/2015 ANP n degrees 50/2015. D.B.P and E.R.C. thank to Spanish Ministry of Science and Innovation, project PID2021-126235OB-C32 funded by MCIN/AEIMCIN/AEI/10.13039/501100011033/and FEDER funds, and project TED2021-130756B-C31 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the selective transformation of ethanol over Mg- and/or La-containing mixed oxides catalysts

  • Ballesteros Plata, D.
  • Balestra, G.
  • Cecilia, J.A.
  • Barroso Martín, I.
  • Infantes-Molina, A.
  • Tabanelli, T.
  • Cavani, F.
  • Montaña, M.
  • Rodríguez Castellón, E.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] MgO-La2O3 catalysts with different Mg/La molar ratio were synthesized by a precipitation method and a subsequent calcination and then characterized by x-ray diffraction, N2 adsorption-desorption isotherms (at-196 degrees C), CO2- and NH3-thermoprogrammed desorption and x-ray photoelectronic spectroscopy. The coexistence of acid and basic sites promoted the selective transformation of ethanol into valuable products. Thus, MgO catalyst promoted the Guerbet reaction obtaining n-butanol as product while the incorporation of La2O3 in the catalytic system improved the ethanol conversion notably, obtaining ethylene as the main product due to a dehydration reaction. The highest ethylene yield was obtained for the catalyst with a Mg/La molar ratio of 1., The funding received for this study from the Spanish Ministry of Science and Innovation, PID2021-126235OB-C31 and PID2021-126235OB-C32 funded by MCIN/AEI/10.13039/501100011033 and FEDER funds, and projects TED2021-130756B-C31 and TED2021-130756B-C32 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGenerationEU/PRTR, is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of CO2 presence on propane conversion routes over Cr-and Ga-doped PtCe/Al2O3 catalysts

  • Ballesteros-Plata, D.
  • Barroso-Martín, I.
  • Cecilia, J.A.
  • Rodriguez-Castellon, E.
  • Infantes-Molina, A.
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] A set of catalysts containing Cr-or Ga-doped Pt-CeO2 supported on alumina (PCA, Cr-PCA and Ga-PCA) were synthesized by incipient wetness impregnation and tested in propane conversion processes. The catalysts were studied in the propane conversion process with or without CO2 in the feed. In all cases, an enhancement in stability was found when CO2 was present in the reaction medium despite the lower catalytic activity. As well, all catalysts presented a higher propylene selectivity in the absence of CO2, indicating that the direct dehydrogenation of propane is the main reaction route. Moreover, CO2-assisted propane cracking to ethylene is favoured over propane reforming or direct cracking, given the minimal selectivity to other products like methane. With regards to the catalyst composition, Cr-PCA catalyst was the most active catalyst both in the absence and presence of CO2, due to the presence of weak acidity and coexistence of Cr3+ and Cr6+ redox species, as evidenced by XPS analysis. Ga-PCA catalyst was more selective to propylene, indicating that higher acidity of weak-to-medium nature along with formation of low coordinated Ga3+ species is beneficial for the CO2-ODH process. Raman, DTG and XPS analyses after reaction with CO2 showed that the deactivation of the catalysts was mainly due to carbon deposits of amorphous and graphitic nature on the surface of the catalysts., The authors thank the funding received from the Spanish Ministry of Science and Innovation, PID2021-126235OB-C31 and PID2021-126235OB-C32 funded by MCIN/AEI/10.13039/501100011033 and FEDER funds, and projects TED2021-130756B-C31 and TED2021-130756B-C32 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGener-ationEU/PRTR. IBM thanks Universidad de Ma <acute accent> laga for a postdoctoral grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Developing and understanding Leaching-Resistant cobalt nanoparticles via N/P incorporation for liquid phase hydroformylation

  • Galdeano-Ruano, Carmen Piedad
  • Lopes, Christian W.
  • Mazarío, Jaime
  • Chinchilla, Lidia E.
  • Agostini, Giovanni
  • Calvino, JJ
  • Holgado, Juan P.
  • Rodriguez-Castellon, Enrique
  • Roldan, Alberto
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] The ultimate target in heterogeneous catalysis is the achievement of robust, resilient and highly efficient materials capable of resisting industrial reaction conditions. Pursuing that goal in liquid -phase hydroformylation poses a unique challenge due to carbon monoxide -induced metal carbonyl species formation, which is directly related to the formation of active homogeneous catalysts by metal leaching. Herein, supported heteroatomincorporated (P and N) Co nanoparticles were developed to enhance the resistance compared with bare Co nanoparticles. The samples underwent characterization using operando XPS, XAS and HR electron microscopy. Overall, P- and N -doped catalysts increased reusability and suppressed leaching. Among the studied catalysts, the one with N as a dopant, CoNx@NC, presents excellent catalytic results for a Co -based catalyst, with a 94% conversion and a selectivity to aldehydes of 80% in only 7.5 h. Even under milder conditions, this catalyst outperformed existing benchmarks in Turnover Numbers (TON) and productivity. In addition, computational simulations provided atomistic insights, shedding light on the remarkable resistance of small Co clusters interacting with N -doped carbon patches., The authors thank the financial support from the Spanish Government (RTI2018-096399-A-I00, PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41, TED2021-130756B-C31 and TED2021-130191B-C44, PID2020-119946RB-I00, US-1263455 funded by MCIN/AEI/10.13039/501100011033 and European Union Next- GenerationEU/PRTR) . This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101022507. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. We also acknowledge the supercomputing Wales for access to the Hawk HPC facility, part-funded by the European Regional Development Fund via the Welsh Government.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Developing and understanding Leaching-Resistant cobalt nanoparticles via N/P incorporation for liquid phase hydroformylation

  • Galdeano Ruano, Carmen
  • Gutiérrez Tarriño, Silvia
  • Lopes, Christian W.
  • Mazarío, Jaime
  • Chinchilla Reyes, Lidia Esther
  • Agostini, Giovanni
  • Calvino Gámez, José Juan
The ultimate target in heterogeneous catalysis is the achievement of robust, resilient and highly efficient materials capable of resisting industrial reaction conditions. Pursuing that goal in liquid-phase hydroformylation poses a unique challenge due to carbon monoxide-induced metal carbonyl species formation, which is directly related to the formation of active homogeneous catalysts by metal leaching. Herein, supported heteroatomincorporated (P and N) Co nanoparticles were developed to enhance the resistance compared with bare Co nanoparticles. The samples underwent characterization using operando XPS, XAS and HR electron microscopy. Overall, P- and N-doped catalysts increased reusability and suppressed leaching. Among the studied catalysts, the one with N as a dopant, CoNx@NC, presents excellent catalytic results for a Co-based catalyst, with a 94% conversion and a selectivity to aldehydes of 80% in only 7.5 h. Even under milder conditions, this catalyst outperformed existing benchmarks in Turnover Numbers (TON) and productivity. In addition, computational simulations provided atomistic insights, shedding light on the remarkable resistance of small Co clusters interacting with N-doped carbon patches.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Carbon-supported VPO catalysts with fibrous structure: A new family of catalysts for partial oxidation reactions

  • Guerrero-Pérez, María Olga
  • Berenguer Betrián, Raúl
  • Ford, Michael E.
  • Wachs, Israel E.
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
The present contribution describes the synthesis of a carbon supported VPO catalyst with a fibrous structure. The synthesis method is simple, low-cost, scalable and reproducible that allows the formation of the bulk mixed oxide (VO)2P2O7 (VPP) active phase on the carbon support material. The preparation does not require any special reducing thermal treatments due to the ability of the carbon support to stabilize the VPP active phase since this carbon-based support is stable under oxidizing conditions up to around 400ºC allowing it to be used as for catalytic oxidation reactions. The stability of the carbon-supported VPP catalyst under reaction conditions was examined with in situ Raman under oxidizing/ H2 reducing cycles and n-butane oxidation conditions under both wet and dry conditions. These studies confirm the dynamic character of VPO phases, which interconvert under different conditions, and the stability of carbon-supported VPP phase under different environments. The novel carbon-supported catalyst exhibits an activity behavior like that observed for commercial catalysts that suggests a very promising catalytic material.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A High Pressure Operando Spectroscopy Examination of Bimetal Interactions in ‘Metal Efficient’ Palladium/In2O3/Al2O3 Catalysts for CO2 Hydrogenation

  • Potter, Matthew E.
  • Mediavilla Madrigal, Sofia
  • Campbell, Emma
  • Allen, Lisa J.
  • Vyas, Urvashi
  • Parry, Stephen
  • García-Zaragoza, Adrián
  • Martínez-Prieto, Luis M.
  • Oña-Burgos, Pascual
  • Lützen, Mads
  • Damsgaard, Christian D.
  • Rodríguez-Castellón, Enrique
  • Schiaroli, Nicola
  • Fornasari, Giuseppe
  • Benito, Patricia
  • Beale, Andrew M.
CO2 hydrogenation to methanol has the potential to serve as a sustainable route to a wide variety of hydrocarbons, fuels and plastics in the quest for net zero. Synergistic Pd/In2O3 (Palldium on Indium Oxide) catalysts show high CO2 conversion and methanol selectivity, enhancing methanol yield. The identity of the optimal active site for this reaction is unclear, either as a Pd−In alloy, proximate metals, or distinct sites. In this work, we demonstrate that metal-efficient Pd/In2O3 species dispersed on Al2O3 can match the performance of pure Pd/In2O3 systems. Further, we follow the evolution of both Pd and In sites, and surface species, under operando reaction conditions using X-ray Absorption Spectroscpy (XAS) and infrared (IR) spectroscopy. In doing so, we can determine both the nature of the active sites and the influence on the catalytic mechanism., UK Catalysis Hub is kindly thanked for resources and support provided via the membership of the UK Catalysis Hub Consortium and funded by current EPSRC grants: EP/ R026939/1 and EP/R026815/1. We thank Diamond Light Source for provision of beam time and support facilities at the beamline B18, under proposal SP30647. We also acknowledge the European Synchrotron Radiation Facility (ESRF) for provision of synchrotron radiation facilities and we would like to thank Dragos Stoian, Kenneth Marshall, Wouter van Beek and Naomi Lawes for assistance and support in using beamline BM31. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 101022507. This work was supported by a research grant (9455) from VILLUM FONDEN. ERC and PBM wish to thanks the Spanish Ministry of Science and Innovation, for projects PID2021-126235OB-C32 and TED2021-130756B C31 funded by MCIN/AEIMCIN/AEI/10.13039/ 501100011033 and FEDER funds, and by “ERDF A way of making Europe, repectively”. We thank Elena Rodríguez Aguado for performing XPS measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Developing and understanding Leaching-Resistant cobalt nanoparticles via N/P incorporation for liquid phase hydroformylation

  • Galdeano-Ruano, Carmen P.
  • Gutiérrez-Tarriño, Silvia
  • Lopes, Christian Wittee
  • Mazarío, Jaime
  • Chinchilla, Lidia E.
  • Agostini, Giovanni
  • Calvino-Gámez, José Juan
  • Holgado, J. P.
  • Rodríguez-Castellón, Enrique
  • Roldán, Alberto
  • Oña-Burgos, Pascual
The ultimate target in heterogeneous catalysis is the achievement of robust, resilient and highly efficient materials capable of resisting industrial reaction conditions. Pursuing that goal in liquid-phase hydroformylation poses a unique challenge due to carbon monoxide-induced metal carbonyl species formation, which is directly related to the formation of active homogeneous catalysts by metal leaching. Herein, supported heteroatom-incorporated (P and N) Co nanoparticles were developed to enhance the resistance compared with bare Co nanoparticles. The samples underwent characterization using operando XPS, XAS and HR electron microscopy. Overall, P- and N-doped catalysts increased reusability and suppressed leaching. Among the studied catalysts, the one with N as a dopant, CoN@NC, presents excellent catalytic results for a Co-based catalyst, with a 94% conversion and a selectivity to aldehydes of 80% in only 7.5 h. Even under milder conditions, this catalyst outperformed existing benchmarks in Turnover Numbers (TON) and productivity. In addition, computational simulations provided atomistic insights, shedding light on the remarkable resistance of small Co clusters interacting with N-doped carbon patches., The authors thank the financial support from the Spanish Government (RTI2018-096399-A-I00, PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41, TED2021-130756B-C31 and TED2021-130191B-C44, PID2020-119946RB-I00, US-1263455funded by MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101022507. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. We also acknowledge the supercomputing Wales for access to the Hawk HPC facility, part-funded by the European Regional Development Fund via the Welsh Government. Some of these experiments were performed at CLAESS (beamtime 2021095439) and CIRCE (beamtime 2022096991) beamlines at ALBA Synchrotron with the collaboration of ALBA staff (Virginia Pérez, Ignacio Villar and Carlo Marini)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct biogas methanation at moderate pressure: Mechanism investigation over Ni-based catalysts

  • Giarnieri, Ilenia
  • Chen, Sining
  • Ballesteros-Plata, Daniel
  • Holgado, Juan P.
  • Maluta, Francesco
  • Caballero, Alfonso
  • Ospitali, Francesca
  • Rodríguez-Castellón, Enrique
  • Fornasari, Giuseppe
  • Beale, Andrew M.
  • Benito, Patricia
Direct upgrading of biogas by CO2 methanation aims to produce a gas to be injected into the grid. Operating at moderate pressures favors thermodynamics, but catalyst surface and reaction mechanism under realistic conditions are not well investigated. We study the role of basic and metallic sites on performance and mechanism of clean biogas methanation (CO2/CH4=1/1 v/v) at 1, 5 and 7 bar. Ni/Mg/La/Al hydrotalcite-derived catalysts, with different Ni and La contents, are investigated combining tests and physico-chemical characterization, including quasi-in situ XPS at 7 bar, with CO2-adsorption and methanation DRIFTS at 1 and 7 bar, respectively. An optimized catalyst (6.5 wt% La, 35 wt% Ni) with 3–4 nm Ni0 and balanced basicity, achieves 96 LCH4*gcat−1* h−1 (300°C, 7 bar). DRIFTS confirm catalysts activity experimental trend. Optimizing Ni and La results in higher consumption rates of formate intermediate and sufficient Ni0 sites for CO formation. Increasing pressure to 7 bar promotes CO and m-HCOO reactivity., D.B.P, E.RC. and P.B. thank to the Spanish Ministry of Science and Innovation, project PID2021–126235OB-C32 funded by MCIN/ AEI/10.13039/501100011033 and FEDER funds, and project TED2021–130756B-C31 funded by MCIN/AEI/10.13039/ 501100011033 and by “ERDF A way of making Europe” by the European Union NextGeneration EU/PRTR. J.P.H. and A.C. acknowledge the financial support through Grant PID2020-119946RB-I00 funded by MCIN/AEI/10.13039/ and the support from Junta de Andalucía (Consejería de Economía y Conocimiento) through US-1263455 project. AMB and SC acknowledge access to the UK Catalysis Hub characterization capability enabled through grant EP/RO26939/1., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Three-dimensional CMK-8 and CMK-9 ordered mesoporous carbons as potential nanocarriers for cephalexin controlled release

  • Montiel-Centeno, Kiara
  • Barrera, Deicy
  • García-Villén, Fátima
  • Viseras, César
  • Rodríguez-Castellón, Enrique
  • Diaz, Cristian A.
  • Moreno, Sergio
  • Sapag, Karim
Ordered mesoporous carbons with a three-dimensional cubic structure, CMK-8 and CMK-9, were synthesized using the hard-template method and evaluated, for the first time, as drug delivery systems for cephalexin (CFX), a widely used antibiotic in infectious disease therapy. The materials were functionalized with 3-aminopropyltriethoxysilane via grafting to enhance aqueous dispersion and control drug release. CFX was loaded by adsorption, and its release was studied under simulated oral conditions at acidic (pH 1.2) and intestinal (pH 6.8) environments. Due to its dual mesoporosity and larger surface area, CMK-9 exhibited superior CFX adsorption capacity compared to CMK-8. Both materials facilitated controlled drug release, with CMK-9 achieving the highest release rate (89 %) within 14 h under acidic conditions, whereas pure CFX exhibited a much faster release. Kinetic analysis using the Weibull model indicated a Fickian diffusion mechanism governed by porosity and electrostatic interactions. These findings underscore the potential of ordered mesoporous carbons with cubic structures as promising platforms for controlled antibiotic delivery., The authors express their gratitude to the Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), the Agencia Nacional de Promoción de Ciencia y Tecnología (ANPCYT), and the Universidad Nacional de San Luis (UNSL) from Argentina, as well as the Project P18-RT-3786 from Spain, for their financial support, which made the completion of this work possible. Kiara Montiel-Centeno is thankful to the SEGIB-Fundación Carolina for the scholarship awarded, which facilitated the research stay at the University of Granada, Spain, where a significant portion of the results presented in this work were obtained. E. Rodríguez-Castellón thanks the Ministry of Science and Innovation (MSI/MCIN) of Spain for the grant of the projects PID2021\u2010126235OB\u2010C32 and TED2021 130756B\u2010C31 financed by MCIN/AEI/10.13039/501100011033 and, as appropriate, by the \u201CEuropean Regional Development Fund (ERDF) A way of making Europe\u201D.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bulk-like ferroelectricity and magnetoelectric response of low-temperature solution-processed BiFeO3¿PbTiO3 films on Ni for metallic MEMS

  • Algueró, Miguel
  • Zia, Layiq
  • Jiménez, Ricardo
  • Amorín, Harvey
  • Bretos, Íñigo
  • Barreto, Adriana
  • Jaffari, G. Hassnain
  • Rodríguez-Castellón, Enrique
  • Ramos, Pablo
  • Calzada, M. L.
Simple and cost-effective procedures for the direct integration of ferroelectric perovskite oxides into Ni structures are necessary to realize related multifunctional metallic microelectromechanical systems, such as dual-source energy harvesters. This is especially difficult in the case of lead-containing morphotropic phase boundary materials for high piezoelectric response because the two components are thermodynamically incompatible and the formation of NiOx or perovskite oxide reduction takes place depending on the processing conditions. We show here that low-temperature solution processing is an effective means to kinetically limit nickel oxidation, capable of providing BiFeO3–PbTiO3 films on Ni plates at only 500 ○C. Bulk-like ferroelectric properties and a distinctive magnetoelectric response were attained. This perovskite system, not explored before on Ni, has a much larger switchable polarization than the widely studied Pb(Zr,Ti)O3, and it is shown here to present an excellent downscaling behavior of ferroelectric properties until the verge of the nanoscale., This work was funded through the Spanish Projects TED2021-130871B-C21/AEI/10.13039/501100011033/Unión Europea Next-GenerationEU/PRTR, and PID2022-136790OB-I00 and PID2019-104732RB-I00, funded by MCIN/AEI/10.13039/501100011033. E.R.C. thanks the Spanish Ministry of Science and Innovation (PID2021-126235OB-C32, funded by MCIN/AEI/10.13039/501100011033/and FEDER funds, and TED2021-130756B-C31, MCIN/AEI/10.13039/501100011033, and “ERDF: A way of making Europe” by the European Union NextGenerationEU/PRTR). L.Z. acknowledges the Higher Education Commission of Pakistan (HEC) for the financial support for his stay at ICMM-CSIC under the Indigenous 5000-PhD Fellowship Program(PIN: 112-27186-2PS1-143) and the International Research Support Initiative Program (IRSIP) (PIN: IRSIP 43 PSc 48).