Pasar al contenido principal

METALES NOBLES ULTRADISPERSOS SOBRE CAPAS ULTRAFINAS DE OXIDOS MODELO BASADOS EN CERIO: APLICACIONES EN PROCESOS DE CATALISIS MEDIOAMBIENTAL

PID2020-113006RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CADIZ

Resultados relacionados

Resultados totales (Incluyendo duplicados): 45
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Enhanced photocatalysis by defect-engineered CeO2 with sulfite activation under visible light irradiation

  • Han, Yaning
  • Chen, Xiaowei
  • Tinoco Rivas, Miguel
  • Fernández García, Susana
  • Hungría, Ana Belén
  • Li, Youxun
  • Nai, Jiyuan
  • Wu, Ren'an
  • Aguinaco, Almudena
  • Blanco, Eduardo
  • Calvino, José Juan
  • Jiang, Lei
Sulfite-based advanced oxidation processes (s-AOPs) have recently garnered significant attention due to their ability to generate highly oxidative sulfate radicals and eliminate contaminants from water. A state-of-the-art platform has been developed through the synergistic combination of s-AOP and photocatalysis under visible light as weak as ambient indoor daylight. This platform achieved an enhanced degradation efficiency for defect-engineered CeO2 nanocubes by using sodium sulfite instead of SO2, resulting in a synergy factor of up to 88%. The reaction pathways, intermediates, ion leaching and the possible influence of aqueous conditions during the methyl orange degradation have been investigated. The CeO2/Na2SO3/vis-light platform exhibits promising prospect as a system to enhance conventional s-AOP in wastewater treatment or disinfection. It demonstrates excellent performance in terms of pH sensitivity, anion influence, and resistance to leaching. This highlights its significant potential for practical applications and future process scale-up.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Synthesis and Applications of N-Doped Carbon Supported Pd-Based Bimetallic Nanoparticles by Synergistic Chemical and Thermal Modifications of MOFs

  • Martínez, Jordan Santiago
[ES] Esta tesis presenta el desarrollo de procesos catalíticos sostenibles mediante el uso de catalizadores heterogéneos avanzados, centrándose en la síntesis de composites derivados de MOFs para la semihidrogenación selectiva de alquinos y la división electroquímica del agua. Inicialmente, se investigó una nueva metodología para convertir PdIn-MOF en nanopartículas soportadas en carbono dopado con nitrogeno. La combinación de tratamientos químico y térmicos permitió obtener el composite PdIn-QT, destacable por su estabilidad y control estructural. Además, el estudio demostró que las propiedades de las nanopartículas y del carbono se pueden controlar ajustando la polaridad del disolvente y seleccionando tipos específicos de aminas. Después de la elaboración de los nuevos precursores basados en MOFs de PdCo y PdMn, se aplicó nuestra estrategia de transformación de MOFs recientemente desarrollada, basada en la combinación de tratamientos químicos y térmicos. Posteriormente, se emplearon estos nuevos catalizadores basados en PdCo, PdMn, y PdIn para la hidrogenación selectiva de fenilacetileno, logrando alta estabilidad y selectividad. En particular, el PdCo-QT mostró un rendimiento excepcional en procesos en continuo en fase gaseosa, subrayándose su potencial para posibles aplicaciones industriales. Finalmente, estos materiales se utilizaron como electrodos y mostraron un rendimiento competitivo en comparación con catalizadores de referencia en las reacciones de evolución de hidrógeno y oxígeno (HER y OER). En particular, PdCo-QT, con su alta eficiencia y estabilidad, demostró un gran potencial para aplicaciones sostenibles en la división del agua. En resumen, este trabajo introduce una nueva familia de catalizadores con propiedades ajustables, adecuados tanto para la catálisis industrial como para aplicaciones en generación de energía limpia., [CA] Aquesta tesi presenta el desenvolupament de processos catalítics sostenibles mitjançant l'ús de catalitzadors heterogenis avançats, centrant-se en la síntesi de composites derivats de MOFs per a la semihidrogenació selectiva d'alquins i la divisió electroquímica de l'aigua. Inicialment, es va investigar una nova metodologia per a convertir PdIn-MOF en nanopartícules suportades en carboni. La combinació dels tractaments químic i tèrmic va permetre obtindre el composite PdIn-QT, destacat per la seua estabilitat i control estructural. A més, l'estudi va demostrar que les propietats de les nanopartícules i del carboni es controlen ajustant la polaritat del dissolvent i seleccionant tipus específics d'amines. Després de l'elaboració de nous precursors basats en MOFs de PdCo i PdMn, es va aplicar la nostra estratègia de transformació de MOFs recentment desenvolupada, basada en la combinació de tractaments químics i tèrmics. Posteriorment, es van emprar aquestes catalitzadors basats en PdCo, PdMn i PdIn per a la hidrogenació selectiva del fenilacetilè, aconseguint una alta estabilitat i selectivitat. En particular, el PdCo-QT va mostrar un rendiment excepcional en processos en continu en fase gasosa, subratllant-se el seu potencial per a aplicacions industrials. Finalment, aquests materials, quan s'utilitzaren com a elèctrodes, van mostrar un rendiment competitiu en comparació amb els catalitzadors de referència en les reaccions d'evolució d'hidrogen i oxigen (HER i OER). En particular, el PdCo-QT, amb la seua alta eficiència i estabilitat, va demostrar un gran potencial per a aplicacions sostenibles en la divisió de l'aigua. En resum, aquest treball introdueix una nova família de catalitzadors amb propietats ajustables, adequats tant per a la catàlisi industrial com per a aplicacions de generació d'energia neta., [EN] This thesis develops sustainable catalytic processes using advanced heterogeneous catalysts based on the preparation of MOF-derived composites for selective semi-hydrogenation of alkynes and electrochemical water-splitting applications. Precisely, new methods were followed to transform PdIn-MOF into N-doped carbon-supported nanoparticles. First, a combined chemical and thermal treatment afforded the PdIn-QT composite, which has been distinguished by its stability and structural control. The material was thoroughly compared to the material resulting from the traditional direct pyrolysis method. Then, the study demonstrates that the properties of nanoparticles and carbon can be improved by optimizing solvent polarity and the type of amines involved during the chemical transformation. Later, after the elaboration of the new PdCo, and PdMn MOF precursors, our newly developed MOF transformation strategy was applied. The resulting PdCo, PdMn, and PdIn-based catalysts were used in the selective hydrogenation of phenylacetylene. They showed excellent selectivity at quantitative conversion levels, with high stability. Among them, PdCo-QT showed excellent activity in continuous gas-phase processes, indicating its potential in industrial applications. Lastly, the first-row transition metal-based materials were tested as electrodes and showed competitive performance against benchmark catalysts in hydrogen and oxygen evolution reactions (HER and OER). Specifically, PdCo-QT showed highly efficient and stable performance, with great potential for sustainable water-splitting applications. In conclusion, this study reports on a new family of tunable catalysts suitable for both industrial catalysis and clean energy applications., I want to thank the financial support received from the Spanish Government (RTI2018-096399-A-I00, PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41 and TED2021-130191B-C44 funded by MCIN/AEI/ 10.13039/501100011033. This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507 and NextGenerationEU/PRTR). HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CLAESS and NOTOS beamlines at ALBA Synchrotron in collaboration with ALBA staff.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient Alkyne Semihydrogenation Catalysis Enabled by Synergistic Chemical and Thermal Modifications of a PdIn MOF

  • Martínez, Jordan Santiago
  • Mazarío, Jaime
  • Wittee Lopes, Christian
  • Trasobares, Susana
  • Calvino Gamez, José Juan
  • Agostini, Giovanni
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Recently, there has been a growing interest in using MOF templating to synthesize heterogeneous catalysts based on metal nanoparticles on carbonaceous supports. Unlike the common approach of direct pyrolysis of PdIn-MOFs at high temperatures, this work proposes a reductive chemical treatment under mild conditions before pyrolysis (resulting in PdIn-QT). The resulting material (PdIn-QT) underwent comprehensive characterization via state-of-the-art aberration-corrected electron microscopy, N2 physisorption, X-ray absorption spectroscopy, Raman, X-ray photoelectron spectroscopy, and X-ray diffraction. These analyses have proven the existence of PdIn bimetallic nanoparticles supported on N-doped carbon. In situ DRIFT spectroscopy reveals the advantageous role of indium (In) in regulating Pd activity in alkyne semihydrogenation. Notably, incorporating a soft nucleation step before pyrolysis enhances surface area, porosity, and nitrogen content compared to direct MOF pyrolysis. The optimized material exhibits outstanding catalytic performance with 96% phenylacetylene conversion and 96% selectivity to phenylethylene in the fifth cycle under mild conditions (5 mmol phenylacetylene, 7 mg cat, 5 mL EtOH, R.T., 1 H2 bar)., The authors thank the financial support from the Spanish Government (RTI2018-096399-A-I00, PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41, and TED2021-130191B-C44) funded by MCIN/AEI/10.13039/501100011033. This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101022507 and NextGenerationEU/PRTR). HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CLAESS and NOTOS beamlines at ALBA Synchrotron with the collaboration of ALBA staff (Carlos Escudero, Carlo Marini). J.M. Salas is acknowledged for experimental contributions to FTIR measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Decoding the Role of Isolated Ga+ in PdGa@MFI Catalyst Promoting a Direct CO2 Hydrogenation Path to DME

  • Zhao, Minjie
  • Diaconescu, Vlad Martin
  • Simonelli, Laura
  • Haro, ML
  • Calvino, JJ
  • Gómez-Acosta, Daviel|||0000-0003-0010-4507
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
[EN] This work presents a strategy to control not only the distance and proximity of active sites at the atomic or nanoscale but also the nature of sites in zeolite-based catalysts, promoting the coupling rate of surface intermediate species and accordingly the formation rate of dimethyl ether (DME) by a direct CO2 hydrogenation path. We use a one-pot synthesis strategy and a thermal-induced detachment process of framework elements, such as Ga3+ ions, to stabilize PdGa alloys and Ga+ sites in close proximity to Br & oslash;nsted acid sites under reductive conditions. Using this strategy, a production of oxygenates of up to 42,864 gMeOH+DME<middle dot>kgPd -1<middle dot>h-1 at 45 bar, 260 degrees C, and WHSV = 15,000 mL<middle dot>gcat -1<middle dot>h-1, is obtained with 80% selectivity to oxygenated (19% methanol/61% DME), outperforming the most active Pd-based CO2 hydrogenation catalysts in the literature. Time-resolved kinetic studies, in situ X-ray adsorption, and in situ and operando IR offer strong proof of the key role of isolated Ga+ Lewis acid sites in close proximity to Br & oslash;nsted acid sites in stabilizing monoformate intermediate species and facilitating the direct production of DME. Finally, this work highlights the key role of the zeolite in metal confinement, conferring excellent stability, oxidation resistance, hydrophilicity, and close proximity of active sites together with the stabilization of low-coordinated Lewis acid sites., P.C. thanks the Ministerio de Ciencia, Innovacion y Universidades, grant no. PID2021-1262350B-C31, and the Generalitat Valenciana (GVA), grant no. CIAICO/2021/2138. P.C. thanks the Advanced Materials programme supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.11) (TED2021-130756B-C32) and by the Generalitat Valenciana (ref MFA/2022/016). M.Z. acknowledges the China Scholarship Council (CSC) for the fellowship. XAS experiments were performed at the ALBA Synchrotron (BL-22 CL AE SS) with the collaboration of the ALBA staff as part of experiment 2022086958. HR-HAADF-STEM measurements were performed at DME-UCA at the Cadiz University. M.L.H. and J.J.C. thank financial support from Projects funded by MICIU/AEI/10.13030/501100011033, PID2020-113006-RB-I00, and PID2022-142312NB-I00, funded by MCIN/AEI/10.13039/501100011033, and by "ERDF A way of making Europe". Project TED2021-130191B-C44, funded by MCIN/AEI/10.13039/501100011033 and the European Union Next Generation EU/PRTR, is also acknowledged. STEM experiments were recorded at the DME-UCA Node of the Spanish Singular Infrastructure for Electron Microscopy of Materials (ICTS ELECMI).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Direct assessment of confinement effect in zeolite-encapsulated subnanometric metal species

  • Liu, Lichen
  • López-Haro, Miguel
  • Perez-Omil, Jose Antonio
  • Calvino, Jose Juan
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Subnanometric metal species confined inside the microporous channels/cavities of zeolites have been demonstrated as stable and efficient catalysts. The confinement interaction between the metal species and zeolite framework has been proposed to play the key role for stabilization, though the confinement interaction is elusive to be identified and measured. By combining theoretical calculations, imaging simulation and experimental measurements based on the scanning transmission electron microscopy-integrated differential phase contrast imaging technique, we have studied the location and coordination environment of isolated iridium atoms and clusters confined in zeolite. The image analysis results indicate that the local strain is intimately related to the strength of metal-zeolite interaction and a good correlation is found between the zeolite deformation energy, the charge state of the iridium species and the local absolute strain. The direct observation of confinement with subnanometric metal species encapsulated in zeolites provides insights to understand their structural features and catalytic consequences. Zeolite-encapsulated metal nanoparticles have important catalytic properties, but their effect on the zeolite local structure has been difficult to characterize. Here the authors, using DFT calculations and scanning transmission electron microscopy, characterize the local strain due to confinement effects in metal-zeolite catalysts., This work has been supported by the Spanish government through the "Severo Ochoa Program" (SEV-2016-0683) (A.C. and M.B.) and PID2020-112590GB-C21 (M.B.). High-resolution STEM measurements were performed at DME-UCA node of ICTS ELECMI in Cadiz University with financial support from FEDER/MINECO (MAT2017-87579-R (J.J.C.), PID2020-113006-RB-I00 (J.J.C.) and PID2019-110018GA-I00 (M.L.-H.)). The computations were performed on the Tirant III cluster of the Servei d'Informatica of the University of Valencia. The supports from Tsinghua University (L.L.) are also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Understanding the potential-induced activation of a cobalt MOF electrocatalyst for the oxygen evolution reaction

  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
  • Portorreal-Bottier, Arismendy
  • Trasobares, Susana
  • Calvente, Juan José
  • Calvino, Juan José
  • Olloqui-Sariego, José Luis
[EN] Metal-organic frameworks (MOFs) are attractive porous materials for electrocatalytic applications associated with carbon-free energy storage and conversion. This type of material usually requires a post-treatment to be used as electrocatalyst. The present work comprehensively investigates the electrochemical activation of a cobalt-MOF@Nafion composite that produces outstanding electrocatalytic performance for the water oxidation reaction at neutral pH. A detailed electrochemical characterization reveals that the electroactivation of the composite requires the participation of the oxygen evolution reaction (OER) and leads to a significant increase in the electroactive population of cobalt centers. It is shown that an increase of the applied activation potential in the OER region results in a faster electroactivation of the Co-MOF without affecting the intrinsic electrocatalytic properties of the active cobalt centers, as evidenced by the unique linear correlation between the electrocatalytic OER current and the population of electroactive cobalt. In addition, at structural level, it is shown that the electrochemical activation causes the partial disruption of the Nafion adlayer, as well as morphological changes of the Co-MOF particles from a compact, rounded morphology, before electrochemical activation, to a more open and expanded structure, after electroactivation; with the concomitant increase of the number of surface--exposed cobalt centers. Interestingly, these cobalt centers retain their coordinative chemistry and their laminar distribution in the nanosheets at the nanoscale, which is consistent with the preservation of their intrinsic electrocatalytic activity after potential-induced activation. In this scenario, these results suggest that only the electroactivated cobalt centers with good accessibility to the electrolyte are electrochemically active. This work provides a better understanding of the processes and structural changes underlying the electrochemical acti-vation at neutral pH of a Co-MOF for boosting the electrocatalytic water oxidation reaction., Authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00, PID2020-113006-RB-I00, PID2021-126799NB-I00, TED2021-130191B-C41, TED2021-130191B-C42 and TED2021-130191B-C44 funded by MCIN/AEI/10.13039/501100011033) and Junta de Andalucia (P20-01027 and PYC 20 RE 060 UAL). The authors acknowledge funding from the European Union's Horizon 2020 research and innovation program under Grant 823717-ESTEEM3. Electron microscopy studies were performed at the DME-UCA node of the Spanish Unique Infrastructure (ICTS) on Electron Microscopy of Materials ELECMI. The authors thank Dr. A. Raya-Baron for his support on this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Highly Stable Subnanometric PtIn Clusters for the Selective Dehydrogenation of Alkanes

  • Li, Chengeng
  • Meyer, Randall J.
  • Yacob, Sara
  • Gomez, Elaine
  • Lopez-Haro, Miguel
  • Calvino, José J.
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Serna Merino, Pedro Manuel
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Subnanometric PtIn clusters have been synthesized within pure silica MFI zeolites by post-synthetic incorporation of In to Pt@K-MFI. The optimized PtIn@K-MFI catalyst outcompetes state-of-the-art PtSn formulations in ethane and propane dehydrogenations, avoiding the need of large excess of Pt promoters and harsh reductive conditions., This work has been supported by the Spanish Government through PID2020113006-RB-I00 and PID2021-122755OB-I00, both funded by MCIN/AEI/10.13039/501100011033, PID2022-142312NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". The authors are also thankful for the Severo Ochoa financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S/ funding by MCIN/AEI/10.13039/501100011033) and for the financial support by the Generalitat Valenciana through the Prometeo Program (CIPROM/2023/34). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. HRSTEM data were acquired at the DME-UCA node of the Spanish Unique Infrastructure for Electron Microscopy of Materials (ICTS ELECMI). We appreciate the support of ExxonMobil Technology and Engineering for our efforts in fundamental catalytic research. The XAS results were collected under the PUP-309462 carried out at the National Synchrotron Light Source II, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Brookhaven National Laboratory under Contract No. DE-AC02-98CH10886. RJM and PSM thank Eli Stavitski, Denis Leshchev and Dominik Wierzbicki for their support at the ISS beamline at NSLS-II. RJM and PSM also thank Corey Kaminsky and Alyssa Love of ExxonMobil for their help with collection of the XAS data.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Building lactams by highly selective hydrodeoxygenation of cyclic imides using an alumina-supported AgRe bimetallic nanocatalyst

  • Lluna-Galán, Carles
  • Arango-Daza, Juan Camilo
  • Sun, Rong
  • Calvino, Jose Juan
  • Simonelli, Laura
  • Adam, Rosa
  • Gómez-Acosta, Daviel|||0000-0003-0010-4507
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Cabrero Antonino, Jose Ramón|||0000-0001-9628-9803
[EN] The rational design of robust nanocatalysts containing the suitable active sites for building relevant organic compounds, such as lactams, is a desired approximation towards the development of a sustainable fine chemistry field. In that sense, the design of a proper nanomaterial able to mediate the selective hydrodeoxygenation of cyclic imides to lactams with high tolerance to the preservation of aromatic rings remains rather unexplored. Here, we show the design of a bimetallic AgRe nanomaterial with notable activity and selectivity to mediate this transformation affording more than 60 lactams from the corresponding imides. Interestingly, in this work we disclose that the optimal AgRe nanocatalyst is constituted by AgReO4 nanoaggregates that undergo an in situ hydrogenative dispersion to form the active centers composed by Ag0 nanoparticles and ReOx species. Deep characterization, together with kinetic and mechanistic studies, have revealed that the intimate Ag-Re contact intrinsic to AgReO4 species is key for the formation of the most active catalytic sites and the proper bimetallic cooperation required for mediating the desired process., This work was supported by Generalitat Valenciana through SEJI (Subvencions Excelencia Juniors Investigadors, grants SEJI/2019/006 and SEJI/2020/013), PROMETEO/2021/077 and CIAICO/2021/2138 programs and a program from "La Caixa" Foundation (ID 100010434), fellowship code LCF/BQ/PI18/11630023. The work was also funded by Spanish Government via MICINN with RETOS I + D + I program (PID2019-109656RA-I0 / AEI / 10.13039/501100011033), grants CNS2023-144172, PID2020-113006-RB-I00, PID2021-1262350B-C31, TED2021-130191B-C44 and TED2021-130756B-C32 funded by MICIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR. Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is also gratefully acknowledged. This study forms part of the Advanced Materials program supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.11) and Generalitat Valenciana (grant MFA/2022/016). R. A. and J. R. C.-A. thank to MICINN (Spanish Government) for two Ramon y Cajal contracts (ref. RYC2020-029493-I and RYC-2017-22717). XAS experiments were performed at BL22-CLAESS beamline at ALBA Synchrotron with the collaboration of ALBA staff (proposal 2022075907). ELECMI-ICTS facilities (proposal ELC402023) are also acknowledged for electron microscopy experiments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multifunctional Heterogeneous Cobalt Catalyst for the One-Pot Synthesis of Benzimidazoles by Reductive Coupling of Dinitroarenes with Aldehydes in Water

  • Río-Rodríguez, José Luis del
  • Chinchilla, Lidia E.
  • Holgado, J.P.
  • Villar-García, Ignacio
  • Pérez Dieste, Virginia
  • Calvino, José Juan
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] The endeavor of sustainable chemistry has led to significant advancements in green methodologies aimed at minimizing environmental impact while maximizing efficiency. Herein, a straightforward synthesis of benzimidazoles by reductive coupling of o-dinitroarenes with aldehydes is reported for the first time in aqueous media while using a non-noble metal catalyst. This work demonstrates that the combination of nitrogen and phosphorous ligands in the synthesis of supported heteroatomincorporated Co nanoparticles is crucial for obtaining the desired benzimidazoles. The process achieves >99% conversion, >99% chemoselectivity and stability for the reduction of dinitroarenes using water as the solvent and hydrogen as the reductant under mild reaction conditions. The robustness of the catalyst has been investigated using several advanced techniques such as HRTEM, HAADF-STEM, XEDS, EELS, and NAP-XPS. In fact, we have shown that the introduction of N and P dopants prevents metal leaching and the sintering of the cobalt nanoparticles. Finally, to explore the general catalytic performance, a wide range of substituted dinitroarenes and benzaldehydes were evaluated, yielding benzimidazoles with competitive and scalable results, including MBIB (94% yield), which is a compound of pharmaceutical interest., Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41 and TED2021-130191B-C44, PID2020-119946RB-I00, funded by MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials programme and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). In addition, this work has received funding from the European Union s Horizon 2020 research and innovation program under grant agreement No 101022507. J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. SGT thanks the Universitat Politècnica de València for her postdoctoral contract PAID-10-23. IJVG would like to acknowledge OSMIBatt - CNS2022-135285 for funding. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CIRCE (beamtime 2022096991) beamline at ALBA Synchrotron with the collaboration of ALBA staff.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-oxidation-state Ru sites stabilized in carbon-doped RuO2 with low-temperature CO2 activation to yield methane

  • Tebar-Soler, Carmen|||0000-0001-7054-4503
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Martin Diaconescu, Vlad
  • Simonelli, Laura
  • Missyul, Alexander
  • Pérez-Dieste, Virginia
  • Villar-García, Ignacio J.
  • Brubach, Jean-Blaise
  • Roy, Pascale
  • Lopez Haro, Miguel
  • CALVINO, JOSE JUAN
[EN] The generation of methane fuel using surplus renewable energy with CO2 as the carbon source enables both the decarbonization and substitution of fossil fuel feedstocks. However, high temperatures are usually required for the efficient activation of CO2. Here we present a solid catalyst synthesized using a mild, green hydrothermal synthesis that involves interstitial carbon doped into ruthenium oxide, which enables the stabilization of Ru cations in a low oxidation state and a ruthenium oxycarbonate phase to form. The catalyst shows an activity and selectivity for the conversion of CO2 into methane at lower temperatures than those of conventional catalysts, with an excellent long-term stability. Furthermore, this catalyst is able to operate under intermittent power supply conditions, which couples very well with electricity production systems based on renewable energies. The structure of the catalyst and the nature of the ruthenium species were acutely characterized by combining advanced imaging and spectroscopic tools at the macro and atomic scales, which highlighted the low-oxidation-state Ru sites (Run+, 0 < n < 4) as responsible for the high catalytic activity. This catalyst suggests alternative perspectives for materials design using interstitial dopants., We thank the support of C. Cerda and M. D. Soriano in the catalyst preparation and testing. This research was funded by the Ministerio de Ciencia, Innovacion y Universidades (grant nos. PID2021-1262350B-C31, PID2020-113006-RB-I00, PID2019-110018GA-I00 and MCIN/AEI/10.13039/501100011033), Generalitat Valenciana (grant no. CIAICO/2021/2138), the Department of Economy, Knowledge, Business and the University of the Regional Government of Andalusia (project reference FEDER-UCA18-107139). This study forms part of the Advanced Materials programme and was supported by MCIN with funding from the European Union Next Generation (EU PRTR-C17.11) and by Generalitad Valenciana (ref. MFA/2022/016). C.T.-S. acknowledges the Polytechnical University of Valencia for the economic support through an FPI scholarship associated with the PAID programme Programa de Ayudas de Investigacion y Desarrollo'. XAS, XPS and XRD experiments were performed at the ALBA Synchrotron with the collaboration of ALBA staff. Infrared experiments were performed at the SOLEIL Synchrotron with the collaboration of SOLEIL staff.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Developing and understanding Leaching-Resistant cobalt nanoparticles via N/P incorporation for liquid phase hydroformylation

  • Galdeano-Ruano, Carmen Piedad
  • Lopes, Christian W.
  • Mazarío, Jaime
  • Chinchilla, Lidia E.
  • Agostini, Giovanni
  • Calvino, JJ
  • Holgado, Juan P.
  • Rodriguez-Castellon, Enrique
  • Roldan, Alberto
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] The ultimate target in heterogeneous catalysis is the achievement of robust, resilient and highly efficient materials capable of resisting industrial reaction conditions. Pursuing that goal in liquid -phase hydroformylation poses a unique challenge due to carbon monoxide -induced metal carbonyl species formation, which is directly related to the formation of active homogeneous catalysts by metal leaching. Herein, supported heteroatomincorporated (P and N) Co nanoparticles were developed to enhance the resistance compared with bare Co nanoparticles. The samples underwent characterization using operando XPS, XAS and HR electron microscopy. Overall, P- and N -doped catalysts increased reusability and suppressed leaching. Among the studied catalysts, the one with N as a dopant, CoNx@NC, presents excellent catalytic results for a Co -based catalyst, with a 94% conversion and a selectivity to aldehydes of 80% in only 7.5 h. Even under milder conditions, this catalyst outperformed existing benchmarks in Turnover Numbers (TON) and productivity. In addition, computational simulations provided atomistic insights, shedding light on the remarkable resistance of small Co clusters interacting with N -doped carbon patches., The authors thank the financial support from the Spanish Government (RTI2018-096399-A-I00, PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41, TED2021-130756B-C31 and TED2021-130191B-C44, PID2020-119946RB-I00, US-1263455 funded by MCIN/AEI/10.13039/501100011033 and European Union Next- GenerationEU/PRTR) . This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101022507. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. We also acknowledge the supercomputing Wales for access to the Hawk HPC facility, part-funded by the European Regional Development Fund via the Welsh Government.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Developing and understanding Leaching-Resistant cobalt nanoparticles via N/P incorporation for liquid phase hydroformylation

  • Galdeano Ruano, Carmen
  • Gutiérrez Tarriño, Silvia
  • Lopes, Christian W.
  • Mazarío, Jaime
  • Chinchilla Reyes, Lidia Esther
  • Agostini, Giovanni
  • Calvino Gámez, José Juan
The ultimate target in heterogeneous catalysis is the achievement of robust, resilient and highly efficient materials capable of resisting industrial reaction conditions. Pursuing that goal in liquid-phase hydroformylation poses a unique challenge due to carbon monoxide-induced metal carbonyl species formation, which is directly related to the formation of active homogeneous catalysts by metal leaching. Herein, supported heteroatomincorporated (P and N) Co nanoparticles were developed to enhance the resistance compared with bare Co nanoparticles. The samples underwent characterization using operando XPS, XAS and HR electron microscopy. Overall, P- and N-doped catalysts increased reusability and suppressed leaching. Among the studied catalysts, the one with N as a dopant, CoNx@NC, presents excellent catalytic results for a Co-based catalyst, with a 94% conversion and a selectivity to aldehydes of 80% in only 7.5 h. Even under milder conditions, this catalyst outperformed existing benchmarks in Turnover Numbers (TON) and productivity. In addition, computational simulations provided atomistic insights, shedding light on the remarkable resistance of small Co clusters interacting with N-doped carbon patches.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

NO Oxidation on Lanthanum-Doped Ceria Nanoparticles with Controlled Morphology

  • Fernández García, Susana
  • Tinoco, Miguel
  • Hungría Hernández, Ana Belén
  • Chen, Xiaowei
  • Calvino Gámez, José Juan
  • Martínez Munuera, Juan Carlos
  • Giménez Mañogil, Javier
  • García García, Avelina
The present work aims to assess the impact of morphology and reducibility on lanthanum-doped ceria nanocatalysts with controlled morphology on the NO oxidation reaction. Specifically, samples were prepared using a hydrothermal method incorporating lanthanum at varying molar concentrations (0, 5, 10, and 15 mol.%) into ceria with a controlled morphology (nanocubes and nanorods). The structural, compositional, and redox characterization of these catalysts has been performed via scanning transmission electron microscopy (STEM), X-ray diffraction (XRD), X-ray energy dispersive spectroscopy (X-EDS), inductively coupled plasma (ICP), hydrogen temperature-programmed reduction (H2-TPR), and oxygen storage capacity (OSC). NO oxidation catalytic tests were conducted, and the results were compared with estimated curves (obtained by considering the proportions of the corresponding components), which revealed the presence of a synergistic effect between lanthanum and ceria. The degree of enhancement was found to depend on both the morphology and the amount of lanthanum incorporated into CeO2. These findings may facilitate the optimization of features concerning ceria-based nanocatalysts for the removal of NOx emissions from exhaust gases., 16 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Clay honeycomb monoliths for the simultaneous retention of lead and cadmium in water

  • Ahrouch, M.
  • Gatica Casas, José Manuel
  • Draoui, K.
  • Bellido Milla, Dolores
  • Vidal Muñoz, Hilario
Natural illite-smectite and stevensite Moroccan clays were used for the simultaneous removal of lead and cadmium from aqueous medium. The clays were employed in raw state and extruded as honeycomb monoliths form without any additives, which confirms the novelty of this approach in water treatment. The experiments were done in batch conditions with continuous stirring and using a recirculated flow, respectively. In addition to a characterization of the clays by XRF, XRD, TGA, laser granulometry, N2 physisorption, FTIR spectroscopy, SEM-EDS and evaluation of the cation exchange capacity, special attention was paid to the influence on the co-adsorption of variables such as adsorbent dosage, contact time and initial concentration of Cd2+ and Pb2+. Pseudo-second order kinetics and good fitting to Redlich-Peterson model for both heavy metals were found. Our results also suggest that Pb2+ and Cd2+ uptake is controlled by chemisorption with predominance of Langmuir characteristics. No significant depletion of the metals retention attributable to competition was observed, particularly for the stevensite (maximum retention capacity of 1.2 mg Pb2+/g and 4.6 mg Cd2+/g) that showed higher specific surface area. For both clays, cadmium ions adsorption was relatively favoured in the bimetallic solution, and the honeycombs kept the powders performance. Honeycomb monoliths as a compact adsorbent offer a promising way of water treatment thanks to their stability and easy incorporation into dynamic processes avoiding the issues of pressure drop under wastewater circulation. (c) 2022 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Improving the reducibility of CeO2/TiO2 by high-temperature redox treatment: the key role of atomically thin CeO2 surface layers

  • Manzorro Ureba, Ramón
  • Montes Monroy, José Manuel
  • Goma Jiménez, Daniel
  • Calvino Gámez, José Juan
  • Pérez Omil, José Antonio
  • Trasobares Llorente, Susana
CeO2/TiO2 catalysts treated in reaction environment at high temperatures evolve into complex and diverse systems, where several mixed oxides are formed. To analyze the redox behavior of this system, multiple oxidations and reducing thermal treatments have been applied. Results from the temperature-programmed reduction studies revealed a clear shift at lower temperatures on the reduction peak when the sample was previously reduced at high temperatures and oxidized under mild conditions. Meanwhile, the reduction peak was moved to high temperatures when the sample was previously reduced and oxidized at severe temperatures. The study, which was aimed at correlating this behavior with its chemical structure, was conducted using advanced electron microscopy, including high-resolution TEM and STEM imaging and spectroscopic techniques such as X-EDS and EELS. The data presented here comparing structures at the atomic level and chemical properties have uniquely unveiled that besides the cerium-titanium mixed oxides, a very thin layer up to a single monolayer was deposited along the TiO2 surface, which indeed was responsible for the improvement of the reducing temperature.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Direct assessment of confinement effect in zeolite-encapsulated subnanometric metal species

  • Liu, Lichen
  • López Haro, Miguel
  • Pérez Omil, José Antonio
  • Boronat, Mercedes
  • Calvino Gámez, José Juan
  • Corma, Avelino
Subnanometric metal species confined inside the microporous channels/cavities of zeolites have been demonstrated as stable and efficient catalysts. The confinement interaction between the metal species and zeolite framework has been proposed to play the key role for stabilization, though the confinement interaction is elusive to be identified and measured. By combining theoretical calculations, imaging simulation and experimental measurements based on the scanning transmission electron microscopy-integrated differential phase contrast imaging technique, we have studied the location and coordination environment of isolated iridium atoms and clusters confined in zeolite. The image analysis results indicate that the local strain is intimately related to the strength of metal-zeolite interaction and a good correlation is found between the zeolite deformation energy, the charge state of the iridium species and the local absolute strain. The direct observation of confinement with subnanometric metal species encapsulated in zeolites provides insights to understand their structural features and catalytic consequences. Zeolite-encapsulated metal nanoparticles have important catalytic properties, but their effect on the zeolite local structure has been difficult to characterize. Here the authors, using DFT calculations and scanning transmission electron microscopy, characterize the local strain due to confinement effects in metal-zeolite catalysts., This work has been supported by the Spanish government through the "Severo Ochoa Program" (SEV-2016-0683) (A.C. and M.B.) and PID2020-112590GB-C21 (M.B.). High-resolution STEM measurements were performed at DME-UCA node of ICTS ELECMI in Cadiz University with financial support from FEDER/MINECO (MAT2017-87579-R (J.J.C.), PID2020-113006-RB-I00 (J.J.C.) and PID2019-110018GA-I00 (M.L.-H.)). The computations were performed on the Tirant III cluster of the Servei d'Informatica of the University of Valencia. The supports from Tsinghua University (L.L.) are also acknowledged.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Segmentation of scanning-transmission electron microscopy images using the ordered median problem

  • Calvino Gámez, José Juan
  • López Haro, Miguel
  • Muñoz Ocaña, Juan Manuel
  • Puerto, Justo
  • Rodríguez Chía, Antonio Manuel
This paper presents new models for segmentation of 2D and 3D Scanning-Transmission Electron Micro- scope images based on the ordered median function. The main advantage of using this function is its good adaptability to the different types of images to be studied due to the wide range of weight vec- tors that can be cast. Classical segmentation models stand out for their ability to provide a segmentation of the original image very quickly and with low computational burden. However, they do not usually achieve high quality segmentations with a small number of clusters in order to classify the different ele- ments which compose the structure represented in the image. The quality of the segmentation provided by our approach is analysed using different choices of the weight vector in some real instances. More- over, improvements are proposed for the formulations to reduce the computational time needed to solve these problems by taking advantage of the weight vector structure, The authors have been partially supported by projects PID2020-114594GB-{C21, C22}, PID2020-1130 06RB-I0 0, PID2019- 110 018GA-I0 0, MAT2017-87579-R funded by MCIN/AEI/ 10.13039/50110 0 011033 and project NetmeetData Fundacion BBVA convocatoria 2019. This work has been co-funded by the 2014–2020 ERDF Operational Programme and by the Depart- ment of Economy, Knowledge, Business and University of the Regional Government of Andalusia; projects FEDER-UCA18-106895, FEDER-UCA18-107139, FEDER-US-1256951 and P18-FR-1422.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Study of the nickel removal from water applying Design of Experiments and using natural clay honeycomb monoliths

  • Bellido Milla, Dolores
  • Vidal Muñoz, Hilario
  • Núñez, María
  • Ahrouch, Mohammadi
  • Gatica Casas, José Manuel
A natural Moroccan illite-smectite clay was investigated as adsorbent of nickel in water. Before its use, it was processed without additives as honeycomb monoliths, an advantageous design in many methods developed to control environmental pollution. The performance of the resulting monoliths was studied in dynamic conditions by flow recirculation through the honeycombs and using Atomic Absorption Spectroscopy for the determination of residual nickel concentration in the solutions. Design of experiments (DoE) was employed to evaluate the influence of three parameters and their interaction on the nickel adsorption capacity of the clay honeycombs: nickel concentration (10–206 ppm), salt concentration (4–36 g/L), and water flow (94–364 mL/min). Based on previous studies, recirculation time, pH and temperature were fixed at 1 h, 4.5 and room temperature, respectively. The maximum amount of nickel adsorbed (0.83 mg/g of clay) was obtained for a nickel concentration of 206 ppm, a 218 mL/min flow, and a salt concentration of 4 g/L. Experimental conditions for the highest repeatability were estimated, the respective values being 108.2 ppm, 94 mL/min and 20 g/L. Nickel retention by the clay was also confirmed after the adsorption tests by direct characterization of the used structured adsorbent through X-ray Fluorescence and SEM-EDS.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Understanding the potential-induced activation of a cobalt MOF electrocatalyst for the oxygen evolution reaction

  • Gutiérrez Tarriño, Silvia
  • Portorreal Bottier, Arismendy
  • Calvente, Juan José
  • Olloqui Sariego, José Luis
  • Oña Burgos, Pascual
  • Trasobares Llorente, Susana
  • Calvino Gámez, José Juan
Metal–organic frameworks (MOFs) are attractive porous materials for electrocatalytic applications associated with carbon-free energy storage and conversion. This type of material usually requires a post-treatment to be used as electrocatalyst. The present work comprehensively investigates the electrochemical activation of a cobalt-MOF@Nafion composite that produces outstanding electrocatalytic performance for the water oxidation reaction at neutral pH. A detailed electrochemical characterization reveals that the electroactivation of the composite requires the participation of the oxygen evolution reaction (OER) and leads to a significant increase in the electroactive population of cobalt centers. It is shown that an increase of the applied activation potential in the OER region results in a faster electroactivation of the Co-MOF without affecting the intrinsic electrocatalytic properties of the active cobalt centers, as evidenced by the unique linear correlation between the electrocatalytic OER current and the population of electroactive cobalt. In addition, at structural level, it is shown that the electrochemical activation causes the partial disruption of the Nafion adlayer, as well as morphological changes of the Co–MOF particles from a compact, rounded morphology, before electrochemical activation, to a more open and expanded structure, after electroactivation; with the concomitant increase of the number of surface–exposed cobalt centers. Interestingly, these cobalt centers retain their coordinative chemistry and their laminar distribution in the nanosheets at the nanoscale, which is consistent with the preservation of their intrinsic electrocatalytic activity after potential–induced activation. In this scenario, these results suggest that only the electroactivated cobalt centers with good accessibility to the electrolyte are electrochemically active. This work provides a better understanding of the processes and structural changes underlying the electrochemical activation at neutral pH of a Co–MOF for boosting the electrocatalytic water oxidation reaction, 9 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Direct quantitative assessment of single-atom metal sites supported on powder catalysts

  • Aniceto-Ocaña, Paula
  • Marqueses Rodríguez, José
  • Pérez Omil, José Antonio
  • Calvino Gámez, José Juan
  • Castillo González, Carmen Esther
  • López Haro, Miguel
Rational design of effective catalyst demands a profound understanding of active-site structures. Single-atom supported powder catalysts, depicting unique features like enhanced metal dispersion, hold promise in different applications. Here, we present an approach to directly quantify the detailed structural nature of metal sites in single-atom, high surface area, powder catalysts. By combining advanced high-resolution scanning-transmission electron microscopy, deep learning and density functional theory calculations, we determine, with statistical significance, the exact location and coordination environment of Pd single-atoms supported on MgO nanoplates. Our findings reveal a preferential interaction of Pd single-atoms with cationic vacancies (V-centers), followed by occupation of anionic defects on the {001} MgO surface. The former interaction results in stabilization of PdO species within V-centers, while partially embedded Pd states are found in F-defects. This methodology opens a route to the ultimate structural analysis of metal-support interaction effects, key in the design of advanced nanocatalysts for sustainable and energy-efficient processes. Metal active sites are important in catalysts to function in various applications. Here, the detailed structural nature of single-atom metal sites is directly quantified using a combination of high-resolution microscopy, deep learning, and theoretical calculation methods.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Valorization of Recycled Honeycombs from Exhausted TWCs by Means of Their Use as a Support of MnOx Catalysts for Acetone Combustion

  • De los Santos, Carolina
  • Gatica Casas, José Manuel
  • Castiglioni, Jorge
  • Vidal Muñoz, Hilario
Exhausted TWCs subjected to chemical/thermal treatments were used as a support of MnOx catalysts for the total combustion of acetone. The so-prepared new devices were characterized by using adherence tests, elemental and thermal analyses, XRD, N2 physisorption, and SEM-EDS. Incorporation of only 2.6 wt.% of the active phase (Mn2O3 and Mn3O4) to the recycled honeycomb considerably improved the catalytic response, achieving at 250 °C a 60% increase in acetone conversion with respect to the spent autocatalyst. The following procedure is proposed as a simple way to provide the TWC devoid of noble metals a second life in the VOCs’ oxidation field., 9 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Using the ℓ1-norm for Image-based tomographic reconstruction

  • Calvino Gámez, José Juan
  • Fernández Areizaga, Elena
  • López Haro, Miguel
  • Muñoz Ocaña, Juan Manuel
  • Rodríguez Chía, Antonio Manuel
This paper introduces an ℓ1-norm model based on Total Variation Minimization for tomographic reconstruction. The reconstructions produced by the proposed model are more accurate than those obtained with classical reconstruction models based on the ℓ2-norm. This model can be linearized and solved by linear programming techniques. Furthermore, the complementary slackness conditions can be exploited to reduce the dimension of the resulting formulation by removing unnecessary variables and constraints. Since the efficacy of the reduced formulation strongly depends on the quality of the dual-multipliers used when applying the reduction method, Lagrangian relaxation is used to obtain near-optimal multipliers. This allows solving larger instances in an efficient way.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Aiming at the valorization of CO2 through its capture by simply extruded high cell-density coal honeycombs

  • Yeste Siguenza, María del Pilar
  • Ahrouch, Mohammadi
  • Goma Jiménez, Daniel
  • García, Rosa María
  • Vidal Muñoz, Hilario
  • Gatica Casas, José Manuel
Integral coal honeycomb monoliths were easily prepared achieving the cell densities typical of commercial cordierites through extrusion plus physical activation. Different techniques such as volumetric adsorption, TGA, TPD and transient kinetic analysis were employed to study their interaction with CO2 at different temperatures (35–100 °C) and under both static and dynamic atmosphere. The CO2 capture capacity resulted to be 0.95 mmol/g at 35 °C, much higher than that of previously studied clay honeycomb adsorbents. The CO2 uptake exhibited fast second order kinetics, and a wide operative window for a highly efficient CO2 removal was found. Moreover, due to a weak interaction, most CO2 adsorbed could be released at 110 °C, what allows minimizing the costs related to controlled regeneration if ones wants to reuse the captured CO2 but at the same time prevents from desorption when this is undesirable. Treatment of the coal honeycomb monolith with a 1:1 CO2+CH4-containing stream revealed, through gas chromatography analysis, the conversion into syngas at relatively low temperatures (50% at 750 °C) in spite of the metal-free character of the monolith. Moreover, this activity reached 90% and remained quite stable for at least 12 h at 900 °C. These results demonstrate the potential of preparing honeycomb monoliths from coal as a strategy to diversify the uses of this abundant natural resource and as an alternative in the field of CO2 capture and valorization.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Combining Deep Learning and Compressed SensingMethods for the 3D Characterization of Ultra-ThinEpitaxial Layers Grown on Controlled-Shape Nano-Oxides

  • Grzonka, Justyna María
  • Marqueses Rodríguez, José
  • Fernández García, Susana
  • Chen, Xiaowei
  • Calvino Gámez, José Juan
  • López Haro, Miguel
Using a nanostructured platform (a controlled-shape nano-oxide) and conventional wet impregnation techniques, powder-type materials have been prepared in which atomically thin surface layers are deposited under very mild conditions. More importantly, an advanced methodology, combining energy dispersive X-ray spectroscopy-scanning transmission electron tomography (STEM-EDX ET) and deep learning denoising techniques, has been developed for the 3D compositional characterization of these unique nanosystems. The complex case of LaOx-coated CeO2 nanocubes is illustrated. For these, aberration corrected 2D STEM-EDX evidence that ceria nanocubes become covered with a 2–4 atom-thick layer of a La, Ce-mixed oxide with spatially varying composition. However, STEM-EDX ET reveals that this layer distributes unevenly, patching most of the available nanocube surface. The large flexibility and spread availability of the involved synthetic techniques enables, using the tools here developed, a wide exploration of the wealth of questions and applications of these intriguing, atomically thin, surface oxide phases, 10 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Novel combination of 3D-printing and electrochemical deposition to design and prepare metallic honeycomb supported catalysts for dry reforming

  • Bazta, Otman
  • Botana Pedemonte, Francisco Javier
  • Calvino Gámez, José Juan
  • Cauqui López, Miguel Ángel
  • Gatica Casas, José Manuel
  • Vidal Muñoz, Hilario
  • González Rovira, Leandro
  • López Castro, Juan De Dios
  • Yeste Siguenza, María del Pilar
  • Blanco Montilla, Ginesa
  • Hernández Garrido, Juan Carlos
A multidisciplinary approach has been followed for the development of structured catalysts based on 3D-printed metallic honeycomb monoliths, which allows overcoming some of the barriers that limit the industrial application of significant catalytic processes such as those related to CO2 valorization. In particular, nickel and/or cerium-containing catalysts have been incorporated into stainless steel honeycombs and evaluated in the Dry Reforming of Methane (DRM) reaction. Moreover, taking advantage of the conductive nature of the metallic substrate, a methodology that allows the incorporation of the active phase by electrochemical deposition has been implemented. The prepared catalysts were characterized by SEM coupled EDX compositional analysis, X-ray fluorescence, X-ray diffraction, X-ray Photoelectron Spectroscopy and Temperature-Programmed Reduction. In contrast to the catalyst where cerium and nickel were co-deposited, the catalyst obtained by sequential electrodeposition of Ce (first) and Ni (second) proved to be highly active and stable in the DRM process, with conversions of both CH4 and CO2 above 90% and H2/CO ratio of ca. 0.8 at 750 ºC for more than 40 h. Moreover, the catalyst kept its good performance after doubling the flow proving its great potential for a real application at higher scale., Ministry of Economy and Competitiveness of Spain (Project PID2020-113006-RB-I00) and the Junta de Andalucía (FQM-110, FQM-334 and TEP-231 groups, and Project P20-00918), Número de páginas: 13
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Insights into Contribution of Active Ceria Supports to Pt-Based Catalysts: Doping Effect (Zr; Pr; Tb) on Catalytic Properties for Glycerol Selective Oxidation

  • Rinaudo, Matías G.
  • Yeste Siguenza, María del Pilar
  • Vidal Muñoz, Hilario
  • Gatica Casas, José Manuel
  • Cadus, Luis E.
  • Morales, Maria R.
How important is the support during the rational design of a catalyst? Herein, doped ceria (Zr; Pr and Tb) was used as an active support to prepare Pt catalysts (0.5 wt%) for glycerol selective oxidation. A thorough characterization of achieved catalytic systems showed that the nature of doping elements led to different physicochemical properties. The presence of surface Pr3+ and Tb3+ not only increased oxygen vacancies but also electron mobility, modifying the oxidation state of platinum particles. The redox properties of the catalyst were also affected, achieving a close interaction between the support and metal particles even in the form of Pt-O-Pr(Tb) solid solutions. Furthermore, the combination of medium-sized metal particle dispersion, strong metal–support interaction and a synergy between the amount of oxygen vacancies and Pt0, observed in the Pt/CeTb catalyst, led to a high turnover frequency (TOF) and increased selectivity to glyceric acid. Thus, the present study reveals how a simple structural modification of active supports, such as cerium oxide, by means of doping elements is capable of improving the catalytic performance during glycerol selective oxidation, avoiding the cumbersome methods of synthesis and activation treatments.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Use of clay honeycomb monoliths for the removal of tetracycline antibiotic from water

  • Sumariva, Félix
  • Moreno Dorado, Francisco Javier
  • Guerra Martínez, Francisco Miguel
  • Goma Jiménez, Daniel
  • Vidal Muñoz, Hilario
  • Gatica Casas, José Manuel
This study assesses the efficacy of natural clays as a cost-effective and ecologically sound method for the removal of tetracycline from water. A notable advancement in the field of antibiotic removal is the utilization of honeycomb monoliths in lieu of traditional powder-based materials. The objective of this approach is to facilitate easier handling and to mitigate the production of sludge. The findings illustrate that, among the five clay types studied, the kerolitic montmorillonite is particularly effective in removing tetracycline from water, achieving levels of approximately 100 mg/g. This effectiveness is remarkably consistent across a range of pH levels (both acidic and basic), temperatures (4–60 °C), and even flow rates when employing the honeycomb design (50–2800 mL/min). These results substantiate the efficacy of this approach as a robust and promising strategy for wastewater treatment. In light of the fact that the principal mechanism of action for these clays is adsorption, the study also addresses ancillary concerns such as filter cleaning for reuse and the complete elimination of tetracycline.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Band gap engineering of ceria nanostructures by incorporating nitrogen-containing heterocyclic ligands

  • Puerto Jiménez, María
  • Goma Jiménez, Daniel
  • Aguinaco Martín, Almudena
  • López Maya, Elena
  • Álvarez, Mayra G.
  • Pintado Caña, José María
  • Blanco Montilla, Ginesa
  • Bogeat-Barroso, Adrián
A novel facile method to prepare ceria nanocrystals with well-defined cubic morphology and enhanced optical properties is herein disclosed. Both the decrease in the band gap and the appearance of absorption edges above 400 nm, which redound in a significant absorption of visible light, are accomplished by simply incorporating in situ different amounts of a typical chelating bidentate ligand, 1,10-phenanthroline, during the synthesis of these ceria nanocubes. Such a remarkable effect has been tentatively connected with the ability of this nitrogen-containing heterocyclic compound to coordinate Ce3+ cations from the ceria precursor salt, thus yielding intermediate N 2p states along the band gap of the oxide.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Efficient Alkyne Semihydrogenation Catalysis Enabled by Synergistic Chemical and Thermal Modifications of a PdIn MOF

  • Martínez, J. S.
  • Mazarío, J.
  • Lopes, C. W.
  • Trasobares Llorente, Susana
  • Calvino Gámez, José Juan
  • Agostini, Giovanni
  • Oña Burgos, Pascual
Recently, there has been a growing interest in using MOF templating to synthesize heterogeneous catalysts based on metal nanoparticles on carbonaceous supports. Unlike the common approach of direct pyrolysis of PdIn-MOFs at high temperatures, this work proposes a reductive chemical treatment under mild conditions before pyrolysis (resulting in PdIn-QT). The resulting material (PdIn-QT) underwent comprehensive characterization via state-of-the-art aberration-corrected electron microscopy, N2 physisorption, X-ray absorption spectroscopy, Raman, X-ray photoelectron spectroscopy, and X-ray diffraction. These analyses have proven the existence of PdIn bimetallic nanoparticles supported on N-doped carbon. In situ DRIFT spectroscopy reveals the advantageous role of indium (In) in regulating Pd activity in alkyne semihydrogenation. Notably, incorporating a soft nucleation step before pyrolysis enhances surface area, porosity, and nitrogen content compared to direct MOF pyrolysis. The optimized material exhibits outstanding catalytic performance with 96% phenylacetylene conversion and 96% selectivity to phenylethylene in the fifth cycle under mild conditions (5 mmol phenylacetylene, 7 mg cat, 5 mL EtOH, R.T., 1 H2 bar).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

CO Methanation over NiO-CeO2 Mixed-Oxide Catalysts Prepared by a Modified Co-Precipitation Method: Effect of the Preparation pH on the Catalytic Performance

  • Aberkane, Amar Bendieb
  • Yeste Siguenza, María del Pilar
  • Fayçal, Djazi
  • Cauqui López, Miguel Ángel
In this study, a series of NiO-CeO2 mixed-oxide catalysts have been prepared by a modified co-precipitation method similar to the one used for the synthesis of hydrotalcites. The syntheses were carried out at different pH values (8, 9 and 10), in order to determine the influence of this synthetic variable on the properties of the obtained materials. These materials were characterized by using different techniques, such as TGA, XRD, ICP, N-2 adsorption-desorption isotherms, H-2 temperature-programmed reduction (H-2-TPR), and electron microscopy, including high-angle annular dark-field transmission electron microscopy (HAADF-TEM) and EDS. The characterization results revealed the influence of the preparation method, in general, and of the pH value, in particular, on the textural properties of the oxides, as well as on the dispersion of the Ni species. The catalyst prepared at a higher pH value (pH = 10) was the one that exhibited better behavior in the CO methanation reaction (almost 100% CO conversion at 235 degrees C), which is attributed to the achievement, under these synthetic conditions, of a combination of properties (metal dispersion, specific surface area, porosity) more suitable for the reaction.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Quantitative Evaluation of Supported Catalysts Key Properties from Electron Tomography Studies: Assessing Accuracy Using Material-Realistic 3D-Models

  • Bouzaine, A.
  • Muñoz Ocaña, Juan Manuel
  • Rodríguez Chía, Antonio Manuel
  • Hungría Hernández, Ana Belén
  • Calvino Gámez, José Juan
  • López Haro, Miguel
Electron Tomography (ET) reconstructions can be analysed, via segmentation techniques, to obtain quantitative, 3D-information about individual nanoparticles in supported catalysts. This includes values of parameters out of reach for any other technique, like their volume and surface, which are required to determine the dispersion of the supported particle system or the specific surface area of the support; two figures that play a major role in the performance of this type of catalysts. However, both the experimental conditions during the acquisition of the tilt series and the limited fidelity of the reconstruction and segmentation algorithms, restrict the quality of the ET results and introduce an undefined amount of error both in the qualitative features of the reconstructions and in all the quantitative parameters measured from them. Here, a method based on the use of well-defined 3D geometrical models (phantoms), with morphological features closely resembling those observed in experimental images of an Au/CeO2 catalyst, has been devised to provide a precise estimation of the accuracy of the reconstructions. Using this approach, the influence of noise and the number of projections on the errors of reconstructions obtained using a Total Variation Minimization in 3D (TVM-3D) algorithm have been determined. Likewise, the benefits of using smart denoising techniques based on Undecimated Wavelet Transforms (UWT) have been also evaluated. The results clearly reveal a large impact of usual noise levels on both the quality of the reconstructions and nanometrological measurement errors. Quantitative clues about the key role of UWT to largely compensate them are also provided., This work has received support from Projects: PID2020-113006-RB-I00, PID2019-110018GA-I00, PID2020-114594GB-C22, funded by MCIN/AEI/https://doi.org/10.13039/501100011033.This work has also been co-financed by Project ref: MAT2017-87579-R and by the 2014 -2020 ERDF Operational Programme and by the Department of Economy, Knowledge, Business and University of the Regional Government of Andalusia, Project references: FEDER-UCA18-107139, FEDERUCA18-106895 and P18-FR-1422. STEM ET experiments were recorded at the DME-UCA Node of the Spanish Singular Infrastructure for Electron Microscopy of Materials (ICTS ELECMI).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Exceptional Low-Temperature CO Oxidation over Noble-Metal-Free Iron-Doped Hollandites: An In-Depth Analysis of the Influence of the Defect Structure on Catalytic Performance

  • Gómez-Recio, Isabel
  • Pan, Huiyan
  • Azor-Lafarga, Alberto
  • Ruiz-González, María Luisa
  • Hernando, María
  • Parras, Marina
  • Fernández-Díaz, María Teresa
  • Delgado Jaén, Juan José
  • Chen, Xiaowei
  • Goma Jiménez, Daniel
  • Portehault, David
  • Sanchez, Clément
  • Cabero, Mariona
  • Martínez-Arias, A.
  • González-Calbet, José M.
  • Calvino Gámez, José Juan
A family of iron-doped manganese-related hollandites, KxMn1−yFeyO2−δ (0 ≤ y ≤ 0.15), with high performance in CO oxidation have been prepared. Among them, the most active catalyst, K0.11Mn0.876Fe0.123O1.80(OH)0.09, is able to oxidize more than 50% of CO at room temperature. Detailed compositional and structural characterization studies, using a wide battery of thermogravimetric, spectroscopic, and diffractometric techniques, both at macroscopic and microscopic levels, have provided essential information about this never-reported behavior, which relates to the oxidation state of manganese. Neutron diffraction studies evidence that the above compound stabilizes hydroxyl groups at the midpoints of the tunnel edges as in isostructural β- FeOOH. The presence of oxygen and hydroxyl species at the anion sublattice and Mn3+, confirmed by electron energy loss spectroscopy, appears to play a key role in the catalytic activity of this doped hollandite oxide. The analysis of these detailed structural features has allowed us to point out the key role of both OH groups and Mn3+ content in these materials, which are able to effectively transform CO without involving any critical, noble metal in the catalyst formulation., This work was supported by FEDER/Spanish Ministry of Science and Innovation through Research Projects MAT2017- 87579-R, MAT2017-82252-R, RTI2018-101604-B-I00, MCIN/AEI/10.13039/501100011033, Project PID2020- 113006-RB-I00, and ENE2017-82451-C3-2-R. The authors acknowledge the National Centre for Electron Microscopy (ELECMI National Singular Scientific Facility) for provision of corrected aberration microscopy.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Supported Ce/Zr pyrochlore monolayers as a route to single cerium atom catalysts with low temperature reducibility

  • Montes Monroy, José Manuel
  • Manzorro Ureba, Ramón
  • Chinchilla Reyes, Lidia Esther
  • Celín, William E.
  • Calvino Gámez, José Juan
  • Pérez Omil, José Antonio
The combination of structural characterization at atomic resolution, chemical data, and theoretical insights has revealed the unique nanostructures which develop in ceria supported on yttria-stabilized zirconia (YSZ) after being submitted to high-temperature reducing treatments. The results show that just a small ceria loading is needed for creating a supported Zr-rich pyrochlore (111) nanostructure, resembling the structure of single cerium atom catalysts. The specific atomic arrangement of this nanostructure allows to explain the improvement of the reducibility at low temperature. The reduction mechanism can be extrapolated to ceria-zirconia mixed oxides with pyrochlore-like cationic ordering, exposing Zr-rich (111) surfaces. The results gathered here provide key information to understand the redox behavior of these types of systems, which may contribute to improving the design of new ceria-zirconia based materials, with lower content of the lanthanide element, nearly 100% cerium atom utilization, and applications in environmental catalysis.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

NO Oxidation on Lanthanum-Doped Ceria Nanoparticles with Controlled Morphology

  • Fernández-García, Susana
  • Tinoco, Miguel
  • Hungría, Ana Belén
  • Chen, Xiaowei
  • Calvino, Jose J.
  • Martínez-Munuera, Juan Carlos
  • Giménez-Mañogil, Javier
  • Garcia-Garcia, Avelina
  • Garcia-Garcia, Avelina|||/items/808fe91f-4dad-4bdc-9433-6321f321e568
The present work aims to assess the impact of morphology and reducibility on lanthanum-doped ceria nanocatalysts with controlled morphology on the NO oxidation reaction. Specifically, samples were prepared using a hydrothermal method incorporating lanthanum at varying molar concentrations (0, 5, 10, and 15 mol.%) into ceria with a controlled morphology (nanocubes and nanorods). The structural, compositional, and redox characterization of these catalysts has been performed via scanning transmission electron microscopy (STEM), X-ray diffraction (XRD), X-ray energy dispersive spectroscopy (X-EDS), inductively coupled plasma (ICP), hydrogen temperature-programmed reduction (H2-TPR), and oxygen storage capacity (OSC). NO oxidation catalytic tests were conducted, and the results were compared with estimated curves (obtained by considering the proportions of the corresponding components), which revealed the presence of a synergistic effect between lanthanum and ceria. The degree of enhancement was found to depend on both the morphology and the amount of lanthanum incorporated into CeO2. These findings may facilitate the optimization of features concerning ceria-based nanocatalysts for the removal of NOx emissions from exhaust gases.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct assessment of confinement effect in zeolite-encapsulated subnanometric metal species

  • Liu, Lichen
  • Lopez-Haro, Miguel
  • Pérez Omil, J. A.
  • Boronat, Mercedes
  • Calvino, Jose J.
  • Corma, Avelino
Subnanometric metal species confined inside the microporous channels/cavities of zeolites have been demonstrated as stable and efficient catalysts. The confinement interaction between the metal species and zeolite framework has been proposed to play the key role for stabilization, though the confinement interaction is elusive to be identified and measured. By combining theoretical calculations, imaging simulation and experimental measurements based on the scanning transmission electron microscopy-integrated differential phase contrast imaging technique, we have studied the location and coordination environment of isolated iridium atoms and clusters confined in zeolite. The image analysis results indicate that the local strain is intimately related to the strength of metal-zeolite interaction and a good correlation is found between the zeolite deformation energy, the charge state of the iridium species and the local absolute strain. The direct observation of confinement with subnanometric metal species encapsulated in zeolites provides insights to understand their structural features and catalytic consequences., This work has been supported by the Spanish government through the “Severo Ochoa Program” (SEV-2016-0683) (A.C. and M.B.) and PID2020-112590GB-C21 (M.B.). High-resolution STEM measurements were performed at DME-UCA node of ICTS ELECMI in Cadiz University with financial support from FEDER/MINECO (MAT2017-87579-R (J.J.C.), PID2020-113006-RB-I00 (J.J.C.) and PID2019-110018GA-I00 (M.L.-H.)). The computations were performed on the Tirant III cluster of the Servei d’Informàtica of the University of Valencia. The supports from Tsinghua University (L.L.) are also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding the potential-induced activation of a cobalt MOF electrocatalyst for the oxygen evolution reaction

  • Gutiérrez-Tarriño, S.
  • Portorreal-Bottier, Arismendy
  • Trasobares, Susana
  • Calvente, Juan José
  • Calvino, Jose J.
  • Olloqui-Sariego, José Luis
  • Oña-Burgos, Pascual
Metal–organic frameworks (MOFs) are attractive porous materials for electrocatalytic applications associated with carbon-free energy storage and conversion. This type of material usually requires a post-treatment to be used as electrocatalyst. The present work comprehensively investigates the electrochemical activation of a cobalt-MOF@Nafion composite that produces outstanding electrocatalytic performance for the water oxidation reaction at neutral pH. A detailed electrochemical characterization reveals that the electroactivation of the composite requires the participation of the oxygen evolution reaction (OER) and leads to a significant increase in the electroactive population of cobalt centers. It is shown that an increase of the applied activation potential in the OER region results in a faster electroactivation of the Co-MOF without affecting the intrinsic electrocatalytic properties of the active cobalt centers, as evidenced by the unique linear correlation between the electrocatalytic OER current and the population of electroactive cobalt. In addition, at structural level, it is shown that the electrochemical activation causes the partial disruption of the Nafion adlayer, as well as morphological changes of the Co–MOF particles from a compact, rounded morphology, before electrochemical activation, to a more open and expanded structure, after electroactivation; with the concomitant increase of the number of surface–exposed cobalt centers. Interestingly, these cobalt centers retain their coordinative chemistry and their laminar distribution in the nanosheets at the nanoscale, which is consistent with the preservation of their intrinsic electrocatalytic activity after potential–induced activation. In this scenario, these results suggest that only the electroactivated cobalt centers with good accessibility to the electrolyte are electrochemically active. This work provides a better understanding of the processes and structural changes underlying the electrochemical activation at neutral pH of a Co–MOF for boosting the electrocatalytic water oxidation reaction., Authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00, PID2020-113006RB-I00, PID2021-126799NB-I00, TED2021-130191B-C41, TED2021-130191B-C42 and TED2021-130191B-C44 funded by MCIN/AEI/ 10.13039/501100011033) and Junta de Andalucía (P20-01027 and PYC 20 RE 060 UAL). The authors acknowledge funding from the European Union’s Horizon 2020 research and innovation program under Grant 823717-ESTEEM3. Electron microscopy studies were performed at the DME-UCA node of the Spanish Unique Infrastructure (ICTS) on Electron Microscopy of Materials ELECMI. The authors thank Dr. A. Raya-Baron for his support on this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-oxidation-state Ru sites stabilized in carbon-doped RuO2 with low-temperature CO2 activation to yield methane

  • Tébar-Soler, Carmen
  • Martin-Diaconescu, Vlad
  • Simonelli, Laura
  • Missyul, Alexander
  • Pérez-Dieste, Virginia
  • Villar-García, Ignacio J.
  • Brubach, Jean-Blaise
  • Roy, Pascale
  • López Haro, Miguel
  • Calvino, José Juan
  • Concepción, Patricia
  • Corma, Avelino
The generation of methane fuel using surplus renewable energy with CO as the carbon source enables both the decarbonization and substitution of fossil fuel feedstocks. However, high temperatures are usually required for the efficient activation of CO. Here we present a solid catalyst synthesized using a mild, green hydrothermal synthesis that involves interstitial carbon doped into ruthenium oxide, which enables the stabilization of Ru cations in a low oxidation state and a ruthenium oxycarbonate phase to form. The catalyst shows an activity and selectivity for the conversion of CO into methane at lower temperatures than those of conventional catalysts, with an excellent long-term stability. Furthermore, this catalyst is able to operate under intermittent power supply conditions, which couples very well with electricity production systems based on renewable energies. The structure of the catalyst and the nature of the ruthenium species were acutely characterized by combining advanced imaging and spectroscopic tools at the macro and atomic scales, which highlighted the low-oxidation-state Ru sites (Ru, 0 < n < 4) as responsible for the high catalytic activity. This catalyst suggests alternative perspectives for materials design using interstitial dopants., We thank the support of C. Cerdá and M. D. Soriano in the catalyst preparation and testing. This research was funded by the Ministerio de Ciencia, Innovación y Universidades (grant nos. PID2021-1262350B-C31, PID2020-113006-RB-I00, PID2019-110018GA-I00 and MCIN/AEI/10.13039/501100011033), Generalitat Valenciana (grant no. CIAICO/2021/2138), the Department of Economy, Knowledge, Business and the University of the Regional Government of Andalusia (project reference FEDER-UCA18-107139). This study forms part of the Advanced Materials programme and was supported by MCIN with funding from the European Union Next Generation (EU PRTR-C17.11) and by Generalitad Valenciana (ref. MFA/2022/016). C.T.-S. acknowledges the Polytechnical University of Valencia for the economic support through an FPI scholarship associated with the PAID programme ‘Programa de Ayudas de Investigación y Desarrollo’. XAS, XPS and XRD experiments were performed at the ALBA Synchrotron with the collaboration of ALBA staff. Infrared experiments were performed at the SOLEIL Synchrotron with the collaboration of SOLEIL staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Developing and understanding Leaching-Resistant cobalt nanoparticles via N/P incorporation for liquid phase hydroformylation

  • Galdeano-Ruano, Carmen P.
  • Gutiérrez-Tarriño, Silvia
  • Lopes, Christian Wittee
  • Mazarío, Jaime
  • Chinchilla, Lidia E.
  • Agostini, Giovanni
  • Calvino-Gámez, José Juan
  • Holgado, J. P.
  • Rodríguez-Castellón, Enrique
  • Roldán, Alberto
  • Oña-Burgos, Pascual
The ultimate target in heterogeneous catalysis is the achievement of robust, resilient and highly efficient materials capable of resisting industrial reaction conditions. Pursuing that goal in liquid-phase hydroformylation poses a unique challenge due to carbon monoxide-induced metal carbonyl species formation, which is directly related to the formation of active homogeneous catalysts by metal leaching. Herein, supported heteroatom-incorporated (P and N) Co nanoparticles were developed to enhance the resistance compared with bare Co nanoparticles. The samples underwent characterization using operando XPS, XAS and HR electron microscopy. Overall, P- and N-doped catalysts increased reusability and suppressed leaching. Among the studied catalysts, the one with N as a dopant, CoN@NC, presents excellent catalytic results for a Co-based catalyst, with a 94% conversion and a selectivity to aldehydes of 80% in only 7.5 h. Even under milder conditions, this catalyst outperformed existing benchmarks in Turnover Numbers (TON) and productivity. In addition, computational simulations provided atomistic insights, shedding light on the remarkable resistance of small Co clusters interacting with N-doped carbon patches., The authors thank the financial support from the Spanish Government (RTI2018-096399-A-I00, PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41, TED2021-130756B-C31 and TED2021-130191B-C44, PID2020-119946RB-I00, US-1263455funded by MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101022507. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. We also acknowledge the supercomputing Wales for access to the Hawk HPC facility, part-funded by the European Regional Development Fund via the Welsh Government. Some of these experiments were performed at CLAESS (beamtime 2021095439) and CIRCE (beamtime 2022096991) beamlines at ALBA Synchrotron with the collaboration of ALBA staff (Virginia Pérez, Ignacio Villar and Carlo Marini)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly Stable Subnanometric PtIn Clusters for the Selective Dehydrogenation of Alkanes

  • Li, Chengeng
  • Meyer, Randall J.
  • Yacob, Sara
  • Gomez, Elaine
  • Lopez-Haro, Miguel
  • Calvino, Jose J.
  • Moliner Marín, Manuel
  • Serna Merino, Pedro
  • Corma, Avelino
Subnanometric PtIn clusters have been synthesized within pure silica MFI zeolites by post-synthetic incorporation of In to Pt@K-MFI. The optimized PtIn@K-MFI catalyst outcompetes state-of-the-art PtSn formulations in ethane and propane dehydrogenations, avoiding the need of large excess of Pt promoters and harsh reductive conditions., This work has been supported by the Spanish Government through PID2020113006-RB-I00 and PID2021-122755OB-I00, both funded by MCIN/AEI/10.13039/501100011033, PID2022-142312NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. The authors are also thankful for the Severo Ochoa financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S/ funding by MCIN/AEI/10.13039/501100011033) and for the financial support by the Generalitat Valenciana through the Prometeo Program (CIPROM/2023/34). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. HRSTEM data were acquired at the DME-UCA node of the Spanish Unique Infrastructure for Electron Microscopy of Materials (ICTS ELECMI). We appreciate the support of ExxonMobil Technology and Engineering for our efforts in fundamental catalytic research. The XAS results were collected under the PUP-309462 carried out at the National Synchrotron Light Source II, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Brookhaven National Laboratory under Contract No. DE-AC02-98CH10886. RJM and PSM thank Eli Stavitski, Denis Leshchev and Dominik Wierzbicki for their support at the ISS beamline at NSLS-II. RJM and PSM also thank Corey Kaminsky and Alyssa Love of ExxonMobil for their help with collection of the XAS data.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficient Alkyne Semihydrogenation Catalysis Enabled by Synergistic Chemical and Thermal Modifications of a PdIn MOF

  • Martínez, Jordan
  • Mazarío, Jaime
  • Lopes, Christian W.
  • Trasobares, Susana
  • Calvino Gamez, Jose Juan
  • Agostini, Giovanni
  • Oña-Burgos, Pascual
Recently, there has been a growing interest in using MOF templating to synthesize heterogeneous catalysts based on metal nanoparticles on carbonaceous supports. Unlike the common approach of direct pyrolysis of PdIn-MOFs at high temperatures, this work proposes a reductive chemical treatment under mild conditions before pyrolysis (resulting in PdIn-QT). The resulting material (PdIn-QT) underwent comprehensive characterization via state-of-the-art aberration-corrected electron microscopy, N physisorption, X-ray absorption spectroscopy, Raman, X-ray photoelectron spectroscopy, and X-ray diffraction. These analyses have proven the existence of PdIn bimetallic nanoparticles supported on N-doped carbon. In situ DRIFT spectroscopy reveals the advantageous role of indium (In) in regulating Pd activity in alkyne semihydrogenation. Notably, incorporating a soft nucleation step before pyrolysis enhances surface area, porosity, and nitrogen content compared to direct MOF pyrolysis. The optimized material exhibits outstanding catalytic performance with 96% phenylacetylene conversion and 96% selectivity to phenylethylene in the fifth cycle under mild conditions (5 mmol phenylacetylene, 7 mg cat, 5 mL EtOH, R.T., 1 H bar)., The authors thank the financial support from the Spanish Government (RTI2018-096399-A-I00, PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41, and TED2021-130191B-C44) funded by MCIN/AEI/10.13039/501100011033. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 101022507 and NextGenerationEU/PRTR). HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CLAESS and NOTOS beamlines at ALBA Synchrotron with the collaboration of ALBA staff (Carlos Escudero, Carlo Marini). J.M. Salas is acknowledged for experimental contributions to FTIR measurements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multifunctional Heterogeneous Cobalt Catalyst for the One-Pot Synthesis of Benzimidazoles by Reductive Coupling of Dinitroarenes with Aldehydes in Water

  • del Río-Rodríguez, José Luis
  • Gutiérrez-Tarriño, S.
  • Chinchilla, Lidia E.
  • Holgado, Juan P.
  • Villar-García, Ignacio J.
  • Pérez-Dieste, Virginia
  • Calvino, José J.
  • Oña-Burgos, Pascual
The endeavor of sustainable chemistry has led to significant advancements in green methodologies aimed at minimizing environmental impact while maximizing efficiency. Herein, a straightforward synthesis of benzimidazoles by reductive coupling of o-dinitroarenes with aldehydes is reported for the first time in aqueous media while using a non-noble metal catalyst. This work demonstrates that the combination of nitrogen and phosphorous ligands in the synthesis of supported heteroatom-incorporated Co nanoparticles is crucial for obtaining the desired benzimidazoles. The process achieves >99 % conversion, >99 % chemoselectivity and stability for the reduction of dinitroarenes using water as the solvent and hydrogen as the reductant under mild reaction conditions. The robustness of the catalyst has been investigated using several advanced techniques such as HRTEM, HAADF-STEM, XEDS, EELS, and NAP-XPS. In fact, we have shown that the introduction of N and P dopants prevents metal leaching and the sintering of the cobalt nanoparticles. Finally, to explore the general catalytic performance, a wide range of substituted dinitroarenes and benzaldehydes were evaluated, yielding benzimidazoles with competitive and scalable results, including MBIB (94 % yield), which is a compound of pharmaceutical interest., Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41 and TED2021-130191B-C44, PID2020-119946RB-I00, funded by MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials programme and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. SGT thanks the Universitat Politècnica de València for her postdoctoral contract PAID-10-23. IJVG would like to acknowledge OSMIBatt - CNS2022-135285 for funding. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CIRCE (beamtime 2022096991) beamline at ALBA Synchrotron with the collaboration of ALBA staff.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multifunctional Heterogeneous Cobalt Catalyst for the One-Pot Synthesis of Benzimidazoles by Reductive Coupling of Dinitroarenes with Aldehydes in Water

  • Del Río-Rodríguez, José Luis
  • Gutiérrez-Tarriño, Silvia
  • Chinchilla, Lidia E
  • Holgado, Juan Pedro
  • Villar-García, Ignacio J
  • Pérez-Dieste, Virginia
  • Calvino, Jose J
  • Oña-Burgos, Pascual
The endeavor of sustainable chemistry has led to significant advancements in green methodologies aimed at minimizing environmental impact while maximizing efficiency. Herein, a straightforward synthesis of benzimidazoles by reductive coupling of o-dinitroarenes with aldehydes is reported for the first time in aqueous media while using a non-noble metal catalyst. This work demonstrates that the combination of nitrogen and phosphorous ligands in the synthesis of supported heteroatom-incorporated Co nanoparticles is crucial for obtaining the desired benzimidazoles. The process achieves >99 % conversion, >99 % chemoselectivity and stability for the reduction of dinitroarenes using water as the solvent and hydrogen as the reductant under mild reaction conditions. The robustness of the catalyst has been investigated using several advanced techniques such as HRTEM, HAADF-STEM, XEDS, EELS, and NAP-XPS. In fact, we have shown that the introduction of N and P dopants prevents metal leaching and the sintering of the cobalt nanoparticles. Finally, to explore the general catalytic performance, a wide range of substituted dinitroarenes and benzaldehydes were evaluated, yielding benzimidazoles with competitive and scalable results, including MBIB (94 % yield), which is a compound of pharmaceutical interest., Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41 and TED2021-130191B-C44, PID2020-119946RB-I00, funded by MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials programme and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. SGT thanks the Universitat Politècnica de València for her postdoctoral contract PAID-10-23. IJVG would like to acknowledge OSMIBatt - CNS2022-135285 for funding. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CIRCE (beamtime 2022096991) beamline at ALBA Synchrotron with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advanced TiO2-based catalysts for polypropylene degradation in aquatic media

  • Egea-Corbacho, A.
  • Martín-García, Ana
  • Salas-Calvo, J.M.
  • Coello, Dolores
  • Rodríguez, R.
  • Moreno-Garrido, Ignacio
  • Sendra, Marta
  • Yeste, María Pilar
Plastics are polluting our environment and oceans with a large number and variety of organic and inorganic compounds that arise as a consequence of the current industrial development. Every year we release to the environment millions of tons of plastics whose total elimination may take centuries. The exponential increase in the production of this material is causing a serious environmental problem, resulting in the generation of a large amount of this waste. Microplastics (MPs) are released into the environment in different ways, but one of the most important is through effluents from wastewater treatment plants, since no specific method is used to eliminate or degrade these MPs before they are discharged into the environment. Polypropylene (PP), together with low-density polyethylene (PE), are the most common MPs found in the environment, being released in an amount of approximately 112 million tons per year. Three catalysts, ZnO/TiO2, CeO2/TiO2 and ZnO-CeO2/TiO2, were synthesized using the incipient wetness impregnation technique and tested under UV-A and UV-B irradiation for the degradation of polypropylene (PP) particles. A degradation of 6.6 ± 1.6 % of MP area in wastewater was obtained, slightly lower than the 8.4 ± 1.0 % observed with ultrapure water, likely due to the presence of organic matter and other compounds in the Waste Water Treatment Plant (WWTP) outlet. Additionally, toxicity assays using Phaeodactylum tricornutum revealed significant differences among treatments. The ZnO-CeO2/TiO2 catalyst resulted in lower growth inhibition compared to ZnO/TiO2, which showed toxicity levels similar to those of UV-aged PP-MPs without catalyst, highlighting the role of catalyst composition in modulating the environmental toxicity of degraded microplastics., This work was supported by Spanish Ministry of Science and Innovation, specifically via the project PID2022-141731OB-I00, entitled “Potabilization technologies for the elimination of emerging contaminants in the presence of microplastics in drinking water, testing of toxic effects”, funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU and the project PID2020–113006-RB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Copper(I) Oxo Species in Cu/ZnO Catalysts and Its Role in the Methanol Synthesis from CO2 Hydrogenation

  • Soriano, José
  • Fo, Y.
  • Gómez, Daviel
  • López Nieto, José Manuel
  • Roy, Abhijit
  • Manzorro, Ramón
  • Arenal, Raúl
  • Calvino, Jose J.
  • Song, Weiyu
This study reveals the presence of low-atomicity copper(I) oxo clusters strongly anchored to ZnO in commercial-type Cu/ZnO catalysts that, coexisting with metallic copper nanoparticles, play a critical role in CO2 hydrogenation. Their detection is challenging because metallic copper nanoparticles dominate the catalyst surface and these clusters appear in low amounts. Nevertheless, definitive evidence of their existence comes from the combination of in situ Raman spectroscopy, temperature-programmed CO surface reaction (TPSR-CO), time-resolved kinetic studies, and advance microscopy studies (STEM-XEDS and STEM-EELS). Catalytic studies combined with density functional theory (DFT) calculations demonstrate its critical role in methanol production and their size-dependent contribution to the total activity compared to traditional Cu-ZnO interfacial sites. According to DFT studies, CO2 adsorption is significantly more favorable on small Cu14O7 and Cu32O16 clusters than on extended Cu2O (111) (110) facets, metallic copper, or conventional metal-support interfacial sites. Moreover, the stabilization of carboxyl rather than formate-like intermediates follows a similar trend than the methanol production, being preferential on small Cu14O7 and Cu32O16 clusters, underlying a carboxyl-type intermediate path in methanol production., This research was funded by Ministerio de Ciencia, Innovación y Universidades, grant numbers PID2021-1262350B-C31, PID2020- 113006-RB-I00, and PID2023-151080NB-I00; CEX2023-001286- S funded by MCIN/AEI/10.13039/501100011033; and the Government of Aragon (DGA) through the project E13_23R and Generalitat Valenciana (GVA), grant number CIAICO/2021/2138. This study forms part of the Advanced Materials program and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.11) and Generalitat Valenciana (TED2021-130756B-C32and ref MFA/2022/016). Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. D.G. thanks the Marie-Curie Postdoctoral (MSCA) Fellowship ID 101154019., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286- S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001230-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Copper(I) Oxo Species in Cu/ZnO Catalysts and Its Role in the Methanol Synthesis from CO2 Hydrogenation

  • Soriano, J.
  • Fo, Y.
  • Gómez, D.
  • Nieto, J.M. López
  • Roy, A.
  • Manzorro, R.
  • Arenal, R.
  • Calvino, J.J.
  • Song, W.
  • Concepción, P.
This study reveals the presence of low-atomicity copper(I) oxo clusters strongly anchored to ZnO in commercial-type Cu/ZnO catalysts that, coexisting with metallic copper nanoparticles, play a critical role in CO2 hydrogenation. Their detection is challenging because metallic copper nanoparticles dominate the catalyst surface and these clusters appear in low amounts. Nevertheless, definitive evidence of their existence comes from the combination of in situ Raman spectroscopy, temperature-programmed CO surface reaction (TPSR-CO), time-resolved kinetic studies, and advance microscopy studies (STEM-XEDS and STEM-EELS). Catalytic studies combined with density functional theory (DFT) calculations demonstrate its critical role in methanol production and their size-dependent contribution to the total activity compared to traditional Cu-ZnO interfacial sites. According to DFT studies, CO2 adsorption is significantly more favorable on small Cu14O7 and Cu32O16 clusters than on extended Cu2O (111) (110) facets, metallic copper, or conventional metal-support interfacial sites. Moreover, the stabilization of carboxyl rather than formate-like intermediates follows a similar trend than the methanol production, being preferential on small Cu14O7 and Cu32O16 clusters, underlying a carboxyl-type intermediate path in methanol production.