Pasar al contenido principal

DESARROLLO Y VALIDACION DE UN DISPOSITIVO MULTIPARAMETRICO PARA EL ANALISIS EN CONTINUO DE MUESTRAS BIOMEDICAS

PID2021-122578NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CADIZ

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

A highly sensitive Sonogel-Carbon electrochemical sensor based on multi-walled carbon nanotubes and gold nanoparticles for dopamine detection in the presence of ascorbic acid

  • Kabouche, Rima
  • Maouche, Naima
  • Halladja, Sabrina
  • Sainz Calvo, Álvaro Jesús
  • García Guzmán, Juan José
  • Palacios Santander, José María
  • Cubillana Aguilera, Laura
In this study, we present a high-performance electrochemical matrix based on a Sonogel–Carbon electrode synergistically modified with gold nanoparticles and carboxylated multi-walled carbon nanotubes. Not only does the resulting electrochemical sensor exhibit high selectivity towards dopamine, even in the presence of high concentrations of ascorbic acid, but it also demonstrates superior electrocatalytic performance compared to conventional glassy carbon electrodes. Surface morphology and composition were characterized using scanning electron microscopy coupled to X-ray energy dispersive spectroscopy, while electrochemical characterizations were performed using cyclic voltammetry and electrochemical impedance spectroscopy. Differential pulse voltammetry was employed to investigate the analytical performance of the electrochemical sensor for dopamine detection. The nanocomposite-modified Sonogel-Carbon electrode shows two wide linear ranges of 0.5–100 μmol L−1and 100–1000 μmol L−1with excellent sensitivity values of 0.468 μΑ/μmol L−1and 0.021 μΑ/μmol L−1, respectively, a low detection limit of 0.04 μmol L−1and good reproducibility (RSD (%) = 3.55, n = 5) and repeatability (RSD (%) = 1.43, n = 5). Moreover, the electrochemical sensor was successfully assessed in artificial human serum and real pharmaceutical samples, highlighting its strong potential for dopamine sensing applications.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Fast, Economic, and Improved Nanostructured Polymeric pH Sensor for Agrifood Analysis

  • Sainz Calvo, Álvaro Jesús
  • Sierra Padilla, Alfonso
  • Bellido Milla, Dolores
  • Cubillana Aguilera, Laura
  • García Guzmán, Juan José
  • Palacios Santander, José María
In the present work, a novel and economical pH sensor has been improved through the application of the conducting polymers poly(3,4-ethylendioxythiphene) and poly(sodium 4-styrene sulphonate). Sinusoidal voltages were applied to electrodeposit the different polymers studied for different periods (10, 15, and 20 min) on the electrode surface. The presence of polyaniline and its reversible redox structure have been corroborated by cyclic voltammetry. The working range has been increased from 3–8 to 2–12, obtaining adequate sensibility and linearity. This new sensor presented satisfactory repeatability, reproducibility (RSD < 5%), AND reversibility (pH range 2–12), and excellent selectivity towards H+ in the presence of diverse interferents in agrifood samples. Finally, the sensor was used to measure the pH in several real samples, whose pH values ranged from 2.23 to 11.5, obtaining excellent results. In addition, the values found were very similar to those reported by the gold technique (pH meter), with an error of less than 10% for most of the samples analyzed. In addition, a preliminary survey about measurements in a continuous flow, using a 3D homemade microfluidic cell, was performed with promising results.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Study of the nickel removal from water applying Design of Experiments and using natural clay honeycomb monoliths

  • Bellido Milla, Dolores
  • Vidal Muñoz, Hilario
  • Núñez, María
  • Ahrouch, Mohammadi
  • Gatica Casas, José Manuel
A natural Moroccan illite-smectite clay was investigated as adsorbent of nickel in water. Before its use, it was processed without additives as honeycomb monoliths, an advantageous design in many methods developed to control environmental pollution. The performance of the resulting monoliths was studied in dynamic conditions by flow recirculation through the honeycombs and using Atomic Absorption Spectroscopy for the determination of residual nickel concentration in the solutions. Design of experiments (DoE) was employed to evaluate the influence of three parameters and their interaction on the nickel adsorption capacity of the clay honeycombs: nickel concentration (10–206 ppm), salt concentration (4–36 g/L), and water flow (94–364 mL/min). Based on previous studies, recirculation time, pH and temperature were fixed at 1 h, 4.5 and room temperature, respectively. The maximum amount of nickel adsorbed (0.83 mg/g of clay) was obtained for a nickel concentration of 206 ppm, a 218 mL/min flow, and a salt concentration of 4 g/L. Experimental conditions for the highest repeatability were estimated, the respective values being 108.2 ppm, 94 mL/min and 20 g/L. Nickel retention by the clay was also confirmed after the adsorption tests by direct characterization of the used structured adsorbent through X-ray Fluorescence and SEM-EDS.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Magnetic Molecularly Imprinted Chitosan Combined with a Paper-Based Analytical Device for the Smartphone Discrimination of Tryptophan Enantiomers

  • Karrat, Abdelhafid
  • García Guzmán, Juan José
  • Palacios Santander, José María
  • Amine, Aziz
  • Cubillana Aguilera, Laura
The separation of enantiomers plays a critical role in pharmaceutical development, ensuring therapeutic efficacy, safety, and patent protection. It enables the production of enantiopure drugs and enhances our understanding of the properties of chiral compounds. In this study, a straightforward and effective chiral detection strategy was developed for distinguishing between tryptophan (TRP) enantiomers. The approach involved the preparation of a magnetic molecularly imprinted chitosan (MMIC) for preparation of the sample, which was combined with a nitrocellulose membrane (a paper-based analytical device, PAD) integrated with D-TRP covalently grafted with polymethacrylic acid (PAD-PMA_D-TRP). Discriminating between the TRP enantiomers was achieved using AuNPs as a colorimetric probe. Indeed, the presence of D-TRP rapidly induced the aggregation of AuNPs due to its strong affinity to PAD-PMA_D-TRP, resulting in a noticeable change in the color of the AuNPs from red to purple. On the other hand, L-TRP did not induce any color changes. The chiral analysis could be easily performed with the naked eye and/or a smartphone. The developed method exhibited a detection limit of 3.3 µM, and it was successfully applied to detect TRP in serum samples, demonstrating good recovery rates. The proposed procedure is characterized by its simplicity, cost-effectiveness, rapidity, and ease of operation
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

What Is Left for Real-Life Lactate Monitoring? Current Advances in Electrochemical Lactate (Bio)Sensors for Agrifood and Biomedical Applications

  • García Guzmán, Juan José
  • Sierra Padilla, Alfonso
  • Palacios Santander, José María
  • Fernández Alba, Juan Jesús
  • González Macías, María del Carmen
  • Cubillana Aguilera, Laura
Monitoring of lactate is spreading from the evident clinical environment, where its role as a biomarker is notorious, to the agrifood ambit as well. In the former, lactate concentration can serve as a useful indicator of several diseases (e.g., tumour development and lactic acidosis) and a relevant value in sports performance for athletes, among others. In the latter, the spotlight is placed on the food control, bringing to the table meaningful information such as decaying product detection and stress monitoring of species. No matter what purpose is involved, electrochemical (bio)sensors stand as a solid and suitable choice. However, for the time being, this statement seems to be true only for discrete measurements. The reality exposes that real and continuous lactate monitoring is still a troublesome goal. In this review, a critical overview of electrochemical lactate (bio)sensors for clinical and agrifood situations is performed. Additionally, the transduction possibilities and different sensor designs approaches are also discussed. The main aim is to reflect the current state of the art and to indicate relevant advances (and bottlenecks) to keep in mind for further development and the final achievement of this highly worthy objective.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Geographical Classification of Saffron (Crocus Sativus L.) Using Total and Synchronous Fluorescence Combined with Chemometric Approaches

  • El Hani, Ouarda
  • García Guzmán, Juan José
  • Palacios Santander, José María
  • Digua, Khalid
  • Amine, Aziz
  • Gharby, Said
  • Cubillana Aguilera, Laura
There is an increasing interest in food science for high-quality natural products with a distinct geographical origin, such as saffron. In this work, the excitation-emission matrix (EEM) and synchronous fluorescence were used for the first time to geographically discriminate between Moroccan saffron from Taroudant, Ouarzazate, and Azilal. Moreover, to differentiate between Afghan, Iranian, and Moroccan saffron, a unique fingerprint was assigned to each sample by visualizing the EEM physiognomy. Moreover, principal component analysis (LDA) and linear discriminant analysis (LDA) were successfully applied to classify the synchronous spectra of samples. High fluorescence intensities were registered for Ouarzazate and Taroudant saffron. Yet, the Azilal saffron was distinguished by its low intensities. Furthermore, Moroccan, Afghan, and Iranian saffron were correctly assigned to their origins using PCA and LDA for different offsets (Δλ) (20–250 nm) such that the difference in the fluorescence composition of the three countries’ saffron was registered in the following excitation/emission ranges: 250–325 nm/300–480 nm and 360–425 nm/500–550 nm. These regions are characterized by the high polyphenolic content of Moroccan saffron and the important composition of Afghan saffron, including vitamins and terpenoids. However, weak intensities of these compounds were found in Iranian saffron. Furthermore, a substantial explained variance (97–100% for PC1 and PC2) and an important classification rate (70–90%) were achieved. Thus, the non-destructive applied methodology of discrimination was rapid, straightforward, reliable, and accurate., 17 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Feather-like Gold Nanostructures Anchored onto 3D Mesoporous Laser-Scribed Graphene: A Highly Sensitive Platform for Enzymeless Glucose Electrochemical Detection in Neutral Media

  • Berni, Achraf
  • Amine, Aziz
  • García Guzmán, Juan José
  • Cubillana Aguilera, Laura
  • Palacios Santander, José María
The authors present a novel sensing platform for a disposable electrochemical, non-enzymatic glucose sensor strip at physiological pH. The sensing material is based on dendritic gold nanostructures (AuNs) resembling feather branches, which are electrodeposited onto a laser-scribed 3D graphene electrode (LSGE). The LSGEs were fabricated via a one-step laser scribing process on a commercially available polyimide sheet. This study investigates several parameters that influence the morphology of the deposited Au nanostructures and the catalytic activity toward glucose electro-oxidation. The electrocatalytic activity of the AuNs-LSGE was evaluated using cyclic voltammetry (CV), linear sweep voltammetry (LSV), and amperometry and was compared to commercially available carbon electrodes prepared under the same electrodeposition conditions. The sensor demonstrated good stability and high selectivity of the amperometric response in the presence of interfering agents, such as ascorbic acid, when a Nafion membrane was applied over the electrode surface. The proposed sensing strategy offers a wide linear detection range, from 0.5 to 20 mM, which covers normal and elevated levels of glucose in the blood, with a detection limit of 0.21 mM. The AuNs-LSGE platform exhibits great potential for use as a disposable glucose sensor strip for point-of-care applications, including self-monitoring and food management. Its non-enzymatic features reduce dependence on enzymes, making it suitable for practical and cost-effective biosensing solutions.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Molecularly imprinted alginate-PVP membrane for the selective fluorescence detection of flavonoids in foods: A practical case for rutin

  • El Hani, Ouarda
  • García Guzmán, Juan José
  • Palacios Santander, José María
  • Digua, Khalid
  • Amine, Aziz
  • Cubillana Aguilera, Laura
Flavonoids benefits have rendered them interesting molecules in the realm of sensing. However, a significant challenge lies in their selective and sensitive detection in complex matrices. One of the most relevant flavonoids is rutin (RU), a flavonoid glycoside. In this work, a novel, straightforward, and green approach is proposed to prepare a selective molecularly imprinted membrane (MIM) for RU based on sodium alginate and polyvinylpyrrolidone, following a central composite design for the optimization of the MIM preparation. The developed membrane was characterized by Fourier transform infrared spectroscopy, thermo-gravimetric analysis, and scanning electron microscopy to assess the functional, thermal, and morphological properties of the membrane, respectively. The developed MIM was successfully applied for the selective and sensitive solid spectro-fluorescence sensing of RU within a concentration range of 0.01–10 µg/mL and a limit of detection (LOD) of 3.6 ng/mL. Furthermore, a new 3D-printed smartphone accessory was designed and applied in smartphone-based solid fluorescence assays. This innovation enabled portable, label-free, rapid, cheap, and green detection of RU across a concentration interval of 0.05–10 µg/mL, with a LOD of 20 ng/mL. Moreover, MIM showed important long-term stability and good reusability (10 regeneration cycles). Finally, the proposed methodology was validated using an accuracy statistical approach. Overall, this study didn't only demonstrate an innovative and straightforward approach to imprinting technology but also highlighted the promise of the proposed smartphone-based sensing method as a versatile tool with a broad range of applications to automatize the analysis and to enhance portable diagnosis technology.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

New strategies for the removal of template from the ion and molecularly imprinted polymers: Application to the fast and on-site Cr(VI) detection with a smartphone

  • Karrat, Abdelhafid
  • García Guzmán, Juan José
  • Palacios Santander, José María
  • Amine, Aziz
  • Cubillana Aguilera, Laura
The extraction of templates from MIPs is not an easy task as well known, because of the high affinity between monomers and templates. Herein, a new strategy for the immediate removal of the template was developed. Two polymers were prepared, one for hexavalent chromium (Cr(VI)) and the other for rutin molecule, to overcome the extraction problem for ions and molecularly imprinted polymers. A diphenylcarbazide solution was used for removing Cr(VI), allowing an immediate extraction of this ion from the polymer. For rutin molecule, the aluminum solution allowed fast removal. Since these removal strategies imply extracting with coloration development, these elution solutions could be used simultaneously for the extraction and detection of the analyte. Indeed, an analytical reading kit has been 3D-printed for the Cr(VI) smartphone detection. In this tool, a column containing the ionic imprinted polymer (IIP) was used as sorbent and diphenylcarbazide solution for eluting and detecting Cr(VI). The developed sensor exhibited a detection limit of 0.006 µg mL-1. The proposed procedure was applied successfully for Cr(VI) determination in tap and river waters showing satisfactory recoveries. These extraction methods pave the way for the application of other ligands for the gentle, fast and on-site removal of different templates.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Development of a molecularly imprinted membrane for selective, high-sensitive, and on-site detection of antibiotics in waters and drugs: Application for sulfamethoxazole

  • El Hani, Ouarda
  • García Guzmán, Juan José
  • Palacios Santander, José María
  • Digua, Khalid
  • Amine, Aziz
  • Cubillana Aguilera, Laura
Sulfonamides are among the widespread bacterial antibiotics. Despite this, their quick emergence constitutes a serious problem for ecosystems and human health. Therefore, there is an increased interest in developing relevant detection method for antibiotics in different matrices. In this work, a straightforward, green, and cost-effective protocol was proposed for the preparation of a selective molecularly imprinted membrane (MIM) of sulfamethoxazole (SMX), a commonly used antibiotic. Thus, cellulose acetate was used as the functional polymer, while polyethylene glycol served as a pore-former. The developed MIM was successfully characterized through scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The MIM was used as a sensing platform in conjunction with a smartphone for optical readout, enabling on-site, selective, and highly sensitive detection of SMX. In this way, a satisfactory imprinting factor of around 3.6 and a limit of detection of 2 ng mL−1 were reached after applying response surface methodologies, including Box-Behnken and central composite designs. Besides, MIM demonstrated its applicability for the accurate and selective detection of SMX in river waters, wastewater, and drugs. Additionally, the MIM was shown to be a valuable sorbent in a solid-phase extraction protocol, employing a spin column setup that offered rapid and reproducible results. Furthermore, the developed sensing platform exhibited notable regeneration properties over multiple cycles and long shelf-life in different storage conditions. The newly developed methodology is of crucial importance to overcome the limitations of classical imprinting polymers. Furthermore, the smartphone-based platform was used to surpass the typically expensive and complicated methods of detection.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Incorporation of carbon black into a sonogel matrix: improving antifouling properties of a conducting polymer ceramic nanocomposite

  • Sierra Padilla, Alfonso
  • López-Iglesias, David
  • Calatayud‑Macías, Paloma
  • García Guzmán, Juan José
  • Palacios Santander, José María
  • Cubillana Aguilera, Laura
A new electrochemical sensor device has been developed through the modification of a polyaniline-silicon oxide network with carbon black (CB). Enhanced electrical conductivity and antifouling properties have been achieved due to the integra- tion of this cheap nanomaterial into the bulk of the sensor. The structure of the developed material was characterized using Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, and scanning electron microscopy tech- niques. Cyclic voltammetry was used to characterize electrochemically the Sonogel-Carbon/Carbon Black-PANI (SNG-C/ CB-PANI) sensor device. In addition, differential pulse voltammetry was employed to evaluate the analytical response of the sensor towards sundry chlorophenols, common environmental hazards in aqueous ecosystems. The modified sensor material showed excellent antifouling properties, which led to a better electroanalytical performance than the one displayed with the bare sensor. Notably, a sensitivity of 5.48 × 103 μA mM−1 cm−2 and a limit of detection of 0.83 μM were obtained in the determination of 4-chloro-3-methylphenol (PCMC) at a working potential of 0.78 V (vs. 3 M Ag/AgCl/KCl), along with proficient values of reproducibility and repeatability (relative standard deviation < 3%). Finally, the analysis of PCMC was carried out in multiple validated water samples using the synthesized SNG-C/CB-PANI sensor device, obtaining excellent results of recovery values (97–104%). The synergetic effect of polyaniline and carbon black leads to novel antifouling and electrocatalytic effects that improve the applicability of this sensor in sample analysis versus complex conventional devices.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Simple and cost-effective pH and T sensors from top to bottom: New chemical probes based on sonogel-carbon transducers for plasma analyses

  • García Guzmán, Juan José
  • Sainz Calvo, Álvaro Jesús
  • Sierra Padilla, Alfonso
  • Bellido Milla, Dolores
  • Cubillana Aguilera, Laura
  • Palacios Santander, José María
The present work introduces two novel approaches to fabricate simple and cost-effective pH and temperature probes. Sinusoidal voltage methodologies were employed to electrodeposit polyaniline (PANI) at different growth times (10–20 min) on the surface of an affordable Sonogel-Carbon electrode to conform a robust pH sensor. The presence of PANI and its phases were corroborated by electrochemical means. The sensibility, reversibility and selectivity of the produced sensor were very adequate to apply it in physiological samples. In this regard, the proposed sensor was evaluated in artificial blood serum as well as untreated plasma samples obtaining outstanding results in comparison with a gold reference technique (error <2 %). In addition, a new composite sonogel material, intrinsically modified with multiwalled carbon nanotubes, was attached on top of an electrode couple to one-step fabricate a new temperature probe, relating resistance of the probe with the surroundings temperature. In this case, an optical microscopy characterization was performed to study the sturdiness of the layer. Remarkably, suitable results in terms of sensitivity and selectivity were obtained. The probes were assessed in artificial and untreated plasma samples as well, with the corresponding validation step (error <1 %) by using a commercial temperature probe.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Rapid extraction and detection of ellagic acid in plant samples using a selective magnetic molecularly imprinted polymer coupled to a fluorescence method

  • Hani, Ouarda El
  • García Guzmán, Juan José
  • Digua, Khalid
  • Amine, Aziz
  • Karrat, Abdelhafid
  • Cubillana Aguilera, Laura
  • Palacios Santander, José María
A remarkable growth was noticed in the development of molecularly imprinted polymers (MIPs), which have used as efficient synthetic antibodies that contain selective cavities to the target molecule. Hereunder, a novel strategy using MIP as a sorbent in solid-phase extraction was coupled to a fluorescence method for ellagic acid (EA) purification and immediate detection. The synthesis of magnetic-MIP (MMIP) using a rapid and green ultrasound technology was assessed by central composite design to determine the optimal polymerization conditions for a high-imprinting polymer. The MMIP was characterized by Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, and scanning/transmission electron microscopy, which accurately confirmed the functional, magnetic, and morphological features of MMIP. The prepared MMIP was demonstrated to be selective for EA compared to many similar phenols. The spectrofluorometric method showed a linear range from 0.05 to 2 μg·mL−1 of EA, and the limits of detection (LOD) and quantification (LOQ) were 0.005 and 0.02 μg·mL−1, respectively. Besides, the novel proposed smartphone method using the ultraviolet lamp as the excitation source presented a linear range from 0.2 to 4 μg·mL−1, a LOQ of 0.2 μg·mL−1, and a LOD of 0.07 μg.mL−1. The proposed strategy revealed high efficiency in the extraction and detection of EA in grape, redberry, and green tea. Effectively, the calculated recoveries were ranging from 80 to 102% with low values of relative standard deviation ([removed], 10 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Innovative Multipolymer-Based Electrochemical Biosensor Built on a Sonogel–Carbon Electrode Aiming for Continuous and Real-Time Lactate Determination in Physiological Samples: A New Scenario to Exploit Additive Printing †

  • Sierra Padilla, Alfonso
  • García Guzmán, Juan José
  • Blanco Díaz, Lorena
  • Bellido Milla, Dolores
  • Palacios Santander, José María
  • Cubillana Aguilera, Laura
In this work, an amperometric biosensor for lactate determination based on a sonogel–carbon transducer has been developed and evaluated using the lactate oxidase enzyme coated with a multipolymer layer as a bioreceptor. The biosensor obtained had adequate sensitivity (4.16 × 10−8 A mM−1) and a wide linear working range (0.2–20 mM) that allowed for the determination of lactate at high concentrations without showing enzyme saturation phenomena. The selectivity of the biosensor was also verified using interferents commonly observed in physiological samples. Moreover, a microfluidic cell was designed and fabricated to allow the determination of lactate with the proposed biosensor in a continuous regime. In the end, the viability of the biosensor was tested with the proposed flow system using synthetic samples, obtaining excellent results.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Simple Modifications of Sonogel-Carbon Electrodes to Obtain New pH and T Sensors—Target: Reducing Costs, Not Value †

  • García Guzmán, Juan José
  • Sainz Calvo, Álvaro Jesús
  • Pérez Fernández, Ana
  • Sierra Padilla, Alfonso
  • Bellido Milla, Dolores
  • Cubillana Aguilera, Laura
  • Palacios Santander, José María
In this work two new different sensors are developed: a pH sensor and a temperature probe. The former is based on an electrodeposited polyaniline (PANI) layer employing sinusoidal voltages and optimizing the deposition time (10–20 min). On the other hand, the temperature probe was designed by taking advantage of the carbon nanotubes’ temperature properties. Both sensors were built on sonogel-carbon electrodes, seeking cost effective devices. In both scenarios, the results were satisfactory; the repeatability and reproducibility had values below 5%. Additionally, an excellent pH sensor selectivity was evaluated with the challenging interstitial matrix, prospecting an adequate future employment in real clinical samples.