Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

CuGaO2 delafossite as a high-surface area model catalyst for Cu+-activated reactions

  • Fornero, Esteban L.
  • Murgida, Gustavo E.
  • Bosco, Marta V.
  • Hernández Garrido, Juan Carlos
  • Aguirre, Alejo
  • Calaza, Florencia C.
  • Stacchiola, Dario
  • Ganduglia-Pirovano, M. Verónica
  • Bonivardi, Adrian L.
Copper is one of the goldilocks metals in catalysis. Deciphering the local atomic environment and oxidation state of active centers in supported copper catalysts, as well as the design of materials to control their stability under reaction conditions remains a great challenge today. We show here that a mixed-oxide of copper delafossite with gallium (CuGaO2, Cu1+ and Ga3+) in the form of porous nanoplates, mainly exposing (1 1 0) facets with Cu1+ and Ga3+ cations in well-defined surface positions is a promising material as a model catalyst to explore the activity and stability of Cu1+-activated reactions. It is shown that the delafossite structure is preserved after calcination or reduction pretreatments (in pure O2 or H2, respectively). Extensive reduction of the mixed-oxide leads to a stable catalyst with higher activity for CO oxidation, as a result of the formation of geminal dicarbonyl species on Cuδ+, with 0 < δ < 1, under reaction conditions.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Study of the nickel removal from water applying Design of Experiments and using natural clay honeycomb monoliths

  • Bellido Milla, Dolores
  • Vidal Muñoz, Hilario
  • Núñez, María
  • Ahrouch, Mohammadi
  • Gatica Casas, José Manuel
A natural Moroccan illite-smectite clay was investigated as adsorbent of nickel in water. Before its use, it was processed without additives as honeycomb monoliths, an advantageous design in many methods developed to control environmental pollution. The performance of the resulting monoliths was studied in dynamic conditions by flow recirculation through the honeycombs and using Atomic Absorption Spectroscopy for the determination of residual nickel concentration in the solutions. Design of experiments (DoE) was employed to evaluate the influence of three parameters and their interaction on the nickel adsorption capacity of the clay honeycombs: nickel concentration (10–206 ppm), salt concentration (4–36 g/L), and water flow (94–364 mL/min). Based on previous studies, recirculation time, pH and temperature were fixed at 1 h, 4.5 and room temperature, respectively. The maximum amount of nickel adsorbed (0.83 mg/g of clay) was obtained for a nickel concentration of 206 ppm, a 218 mL/min flow, and a salt concentration of 4 g/L. Experimental conditions for the highest repeatability were estimated, the respective values being 108.2 ppm, 94 mL/min and 20 g/L. Nickel retention by the clay was also confirmed after the adsorption tests by direct characterization of the used structured adsorbent through X-ray Fluorescence and SEM-EDS.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Valorization of Recycled Honeycombs from Exhausted TWCs by Means of Their Use as a Support of MnOx Catalysts for Acetone Combustion

  • De los Santos, Carolina
  • Gatica Casas, José Manuel
  • Castiglioni, Jorge
  • Vidal Muñoz, Hilario
Exhausted TWCs subjected to chemical/thermal treatments were used as a support of MnOx catalysts for the total combustion of acetone. The so-prepared new devices were characterized by using adherence tests, elemental and thermal analyses, XRD, N2 physisorption, and SEM-EDS. Incorporation of only 2.6 wt.% of the active phase (Mn2O3 and Mn3O4) to the recycled honeycomb considerably improved the catalytic response, achieving at 250 °C a 60% increase in acetone conversion with respect to the spent autocatalyst. The following procedure is proposed as a simple way to provide the TWC devoid of noble metals a second life in the VOCs’ oxidation field., 9 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Aiming at the valorization of CO2 through its capture by simply extruded high cell-density coal honeycombs

  • Yeste Siguenza, María del Pilar
  • Ahrouch, Mohammadi
  • Goma Jiménez, Daniel
  • García, Rosa María
  • Vidal Muñoz, Hilario
  • Gatica Casas, José Manuel
Integral coal honeycomb monoliths were easily prepared achieving the cell densities typical of commercial cordierites through extrusion plus physical activation. Different techniques such as volumetric adsorption, TGA, TPD and transient kinetic analysis were employed to study their interaction with CO2 at different temperatures (35–100 °C) and under both static and dynamic atmosphere. The CO2 capture capacity resulted to be 0.95 mmol/g at 35 °C, much higher than that of previously studied clay honeycomb adsorbents. The CO2 uptake exhibited fast second order kinetics, and a wide operative window for a highly efficient CO2 removal was found. Moreover, due to a weak interaction, most CO2 adsorbed could be released at 110 °C, what allows minimizing the costs related to controlled regeneration if ones wants to reuse the captured CO2 but at the same time prevents from desorption when this is undesirable. Treatment of the coal honeycomb monolith with a 1:1 CO2+CH4-containing stream revealed, through gas chromatography analysis, the conversion into syngas at relatively low temperatures (50% at 750 °C) in spite of the metal-free character of the monolith. Moreover, this activity reached 90% and remained quite stable for at least 12 h at 900 °C. These results demonstrate the potential of preparing honeycomb monoliths from coal as a strategy to diversify the uses of this abundant natural resource and as an alternative in the field of CO2 capture and valorization.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Novel combination of 3D-printing and electrochemical deposition to design and prepare metallic honeycomb supported catalysts for dry reforming

  • Bazta, Otman
  • Botana Pedemonte, Francisco Javier
  • Calvino Gámez, José Juan
  • Cauqui López, Miguel Ángel
  • Gatica Casas, José Manuel
  • Vidal Muñoz, Hilario
  • González Rovira, Leandro
  • López Castro, Juan De Dios
  • Yeste Siguenza, María del Pilar
  • Blanco Montilla, Ginesa
  • Hernández Garrido, Juan Carlos
A multidisciplinary approach has been followed for the development of structured catalysts based on 3D-printed metallic honeycomb monoliths, which allows overcoming some of the barriers that limit the industrial application of significant catalytic processes such as those related to CO2 valorization. In particular, nickel and/or cerium-containing catalysts have been incorporated into stainless steel honeycombs and evaluated in the Dry Reforming of Methane (DRM) reaction. Moreover, taking advantage of the conductive nature of the metallic substrate, a methodology that allows the incorporation of the active phase by electrochemical deposition has been implemented. The prepared catalysts were characterized by SEM coupled EDX compositional analysis, X-ray fluorescence, X-ray diffraction, X-ray Photoelectron Spectroscopy and Temperature-Programmed Reduction. In contrast to the catalyst where cerium and nickel were co-deposited, the catalyst obtained by sequential electrodeposition of Ce (first) and Ni (second) proved to be highly active and stable in the DRM process, with conversions of both CH4 and CO2 above 90% and H2/CO ratio of ca. 0.8 at 750 ºC for more than 40 h. Moreover, the catalyst kept its good performance after doubling the flow proving its great potential for a real application at higher scale., Ministry of Economy and Competitiveness of Spain (Project PID2020-113006-RB-I00) and the Junta de Andalucía (FQM-110, FQM-334 and TEP-231 groups, and Project P20-00918), Número de páginas: 13