Pasar al contenido principal

CATALIZADORES NANOESTRUCTURADOS BASADOS EN OXIDO DE CERIO PARA VALORIZACION DE GASES DE EFECTO INVERNADERO

PID2021-128915NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Near-surface defects break symmetry in water adsorption on CeO2x(111)

  • Custance, Oscar
  • Gonzalez Lastre, Manuel
  • Kim, Kyungmin
  • Fernández-Villanueva, Estefanía
  • Pou, Pablo
  • Abe, Masayuki
  • Sepehri-Amin, Hossein
  • Kawai, Shigeki
  • Ganduglia-Pirovano, M. Veronica
  • Perez, Ruben
[EN] Water interactions with oxygen-deficient cerium dioxide (CeO2) surfaces are central to hydrogen production and catalytic redox reactions, but the atomic-scale details of how defects influence adsorption and reactivity remain elusive. Here, we unveil how water adsorbs on partially reduced CeO2-x(111) using atomic force microscopy (AFM) with chemically sensitive, oxygen-terminated probes, combined with first-principles calculations. Our AFM imaging reveals water molecules as sharp, asymmetric boomerang-like features radically departing from the symmetric triangular motifs previously attributed to molecular water. Strikingly, these features localize near subsurface defects. While the experiments are carried out at cryogenic temperatures, water was dosed at room temperature, capturing configurations relevant to initial adsorption events in catalytic processes. Density functional theory identifies Ce3+ sites adjacent to subsurface vacancies as the thermodynamically favored adsorption sites, where defect-induced symmetry breaking governs water orientation. Force spectroscopy and simulations further distinguish Ce3+ from Ce4+ centers through their unique interaction signatures. By resolving how subsurface defects control water adsorption at the atomic scale, this work demonstrates the power of chemically selective AFM for probing site-specific reactivity in oxide catalysts, laying the groundwork for direct investigations of complex systems such as single-atom catalysts, metal-support interfaces, and defect-engineered oxides., This work was supported by NIMS grants (AG2030 and AM2100), by several Grant-in-Aid for Scientific Research (19H05789, 21H01812, 21K18876, 22H00285, 23KJ1516, 24K01350) from the Ministry of Education, Culture, Sports, Science and Technology of Japan (MEXT) and by the Spanish Ministry of Science, Innovation and Universities (MCIU), through projects PID2023-149150OB-I00 and PID2021-128915NB-I00, and the "Maria de Maeztu" Program for Units of Excellence in R&D (CEX2023-001316-M). E.F.V. acknowledges support from the Margarita Salas postdoctoral fellowship (Spanish MIU and European Union NextGenerationEU) and the MOMENTUM Program (MMT-24-ICP-01, Plan de Recuperacion, Transformacion y Resiliencia European Union NextGenerationEU). The Spanish Supercomputing Network (RES) is acknowledged for providing computational resources at the Marenostrum Supercomputer (BSC, Barcelona).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Water and Cu+ Synergy in Selective CO2 Hydrogenation to Methanol over Cu-MgO-Al2O3 Catalysts

  • Fernández-Villanueva, Estefanía
  • Lustemberg, Pablo G.
  • Zhao, Minjie
  • Soriano Rodriguez, Jose
  • Ganduglia-Pirovano, M. Verónica
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
[EN] The CO2 hydrogenation reaction to produce methanol holds great significance as it contributes to achieving a CO2-neutral economy. Previous research identified isolated Cu+ species doping the oxide surface of a Cu-MgO-Al2O3-mixed oxide derived from a hydrotalcite precursor as the active site in CO2 hydrogenation, stabilizing monodentate formate species as a crucial intermediate in methanol synthesis. In this work, we present a molecular-level understanding of how surface water and hydroxyl groups play a crucial role in facilitating spontaneous CO2 activation at Cu+ sites and the formation of monodentate formate species. Computational evidence has been experimentally validated by comparing the catalytic performance of the Cu-MgO-Al2O3 catalyst with hydroxyl groups against that of its hydrophobic counterpart, where hydroxyl groups are blocked using an esterification method. Our work highlights the synergistic effect between doped Cu+ ions and adjacent hydroxyl groups, both of which serve as key parameters in regulating methanol production via CO2 hydrogenation. By elucidating the specific roles of these components, we contribute to advancing our understanding of the underlying mechanisms and provide valuable insights for optimizing methanol synthesis processes., The authors express their gratitude for the support received through the grants PID2021-1262350B-C31 and PID2021-128915NB-I00, funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". This study forms part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.11) and Generalitat Valenciana (ref MFA/2022/016). P.G.L. thanks the CSIC for the extension of the MSCA-IF Grant Agreement No. 832121. E.F.V. thanks UPV for her Margarita Salas postdoctoral fellowship and both Spanish MIU and European Union NextGenerationEU for the financial support. Computer time provided by the RES (Red Espanola de Supercomputacion) resources at Mare Nostrum 4 (BSC, Barcelona) and La Palma (IAC, La Palma) nodes is acknowledged. M.Z. acknowledges the China Scholarship Council (CSC) for Ph.D. fellowship (CSC NO. 202006440003). The DFT data that support the findings of this study are available in Materials Cloud {https://www.materialscloud.org/home} with the identifier DOI: 10.24435/materialscloud:tz-pn. The data is also available from the authors upon reasonable request.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fine-Tuning Catalysts: The Role of Support Nanomorphology in Shaping Cu/CeO2 CO-PROX Properties

  • Fernández-Villanueva, Estefanía
  • Perez-Bailac, Patricia
  • Lustemberg, Pablo G.
  • Hungria, Ana B.
  • Pascual, Laura
  • Cataluna, Renato
  • Ganduglia-Pirovano, M. Veronica
  • Martinez-Arias, Arturo
  • Vidal Moya, José Alejandro
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
[EN] Understanding how oxide nanomorphology directs metal-support interactions is key to designing selective, low-cost catalysts. The preferential oxidation of CO (CO-PROX) is vital for purifying H-2 streams for fuel cell applications, as even trace amounts of CO strongly poison the electrode catalysts. Cu/CeO2 systems provide a cost-effective alternative to noble metals, yet the influence of ceria morphology on the performance remains unclear. Here, we compare low-loaded Cu catalysts supported on CeO2 nanospheres and nanocubes. Although distinct in shape, electron microscopy, low-temperature CO adsorption infrared spectroscopy, and DFT calculations reveal surface reconstructions in nanocubes that diminish structural differences between the two supports. Nevertheless, the Cu/nanosphere catalyst shows higher CO oxidation activity, while the Cu/nanocube catalyst offers superior CO2 selectivity and a broader full-conversion temperature window. In situ DRIFTS and DFT spectra attribute these contrasts to stronger CO adsorption sites in the nanocube system. Copper speciation and the nature of surface carbonyls were resolved through complementary techniques, including STEM-HAADF imaging, XEDS mapping, EPR, and CO adsorption IR spectroscopy, together with DFT. These results demonstrate that subtle variations in ceria morphology steer interfacial chemistry and reaction pathways, providing design principles for next-generation Cu-based catalysts for CO-PROX and related oxidation reactions., E.F.V. acknowledges support from the Margarita Salas postdoctoral fellowship (Spanish MIU and European Union-NextGenerationEU) and the MOMENTUM Program (MMT-24-ICP-01, Plan de Recuperacion, Transformacion y Resiliencia-European Union-NextGenerationEU). We gratefully acknowledge funding from projects PID2021-128915NB-I00, PID2022-142312NB-I00, and PID2024-162810NB-I00 financed by Ministerio de Ciencia, Innovacion y Universidades, and ERDF, EU. Computational resources were provided by the Red Espanola de Supercomputacion (RES) at MareNostrum 4 and 5 (BSC, Barcelona) as well as the Centro de Computacion Cientifica at the Universidad Autonoma de Madrid (CCC-UAM). This research also benefited from access to the Galician Supercomputing Center (CESGA) infrastructure, including the FinisTerrae III supercomputer and its permanent data storage system, funded by the Spanish Ministerio de Ciencia, Innovacion y Universidades, the Galician Government, and ERDF.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Engineering PdAu/CeO2 Alloy/Oxide Interfaces for Selective Methane-to-Methanol Conversion with Water

  • Fernández-Villanueva, Estefanía
  • Ramírez, Pedro J.
  • Lustemberg, Pablo G.
  • Pérez, Rubén
  • Ganduglia-Pirovano, Maria Veronica
  • Rodríguez, José A.
[EN] The direct conversion of methane-to-methanol remains a critical challenge in methane valorization. In this study, we unveil the crucial role of PdAu/CeO2 catalysts in enabling selective methane transformation under mild conditions, using only water as the sole oxidant. Through a combination of experimental techniques, including XPS and catalytic testing, alongside density functional theory (DFT) calculations, we demonstrate that a Pd0.3Au0.7/CeO2 catalyst, which predominantly exposes isolated Pd atoms, achieves remarkable methanol selectivity (similar to 80%) at 500 K with a 1:1 methane-to-water ratio. While Pd/CeO2 efficiently activates methane, its tendency for overreaction leads to complete methanol decomposition, thereby limiting selectivity. Alloying Pd with Au on ceria mitigates this over-reactivity, preventing methanol degradation while maintaining sufficient catalytic activity. The PdAu/CeO2 composite exhibits a synergistic effect: Pd in contact with the ceria support facilitates methane activation and water dissociation, while Au fine-tunes reactivity to promote methanol formation. DFT calculations confirm that isolated Pd sites at the PdAu/CeO2 interface play a key role in balancing activity and selectivity. This work underscores the importance of alloy/oxide interfaces in controlling selective methane conversion with water and offers valuable insights for designing highly efficient catalysts for methanol synthesis., The authors thank J.M. Chavez and R.A. Soler for their help during the initial characterization of the PdAu alloys and PdAu/CeO2 composites, and B. Hammer, M.-P. V. Christiansen, and A. Bruix for their guidance in applying the GOFEE methodology. The research conducted at the Chemistry Division of Brookhaven National Laboratory was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Chemical Sciences, Geosciences, and Biosciences Division, Catalysis Science Program (Grant No. DE-SC0012704). P.J.R. is grateful to Zoneca-CENEX for an internal grant that facilitated part of this research. E.F.V. thanks UPV for her Margarita Salas postdoctoral fellowship (Spanish MIU and European Union-Next Generation EU) and the MOMENTUM Program (MMT-24-ICP-01, Plan de Recuperacion, Transformacion y Resiliencia - European Union - NextGenerationEU). M.V.G.P. and P.G.L. thank the Grant PID2021-128915NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF, UE. R.P. acknowledges support from the Spanish Ministry of Science and Innovation, through project PID2023-149150OB-I00, and the "Maria de Maeztu" Programme for Units of Excellence in R&D (CEX2023-001316-M). The authors also acknowledge computational resources provided by the Red Espanola de Supercomputacion (RES) at MareNostrum 4 and 5 (BSC, Barcelona) node and the Centro de Computacion Cientifica-Universidad Autonoma de Madrid (CCC-UAM). Additionally, this research was supported by access to the Galician Supercomputing Center (CESGA) infrastructure, including its FinisTerrae III supercomputer and its permanent data storage system, funded by the Spanish Ministry of Science and Innovation, the Galician Government, and the ERDF.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

CuGaO2 delafossite as a high-surface area model catalyst for Cu+-activated reactions

  • Fornero, Esteban L.
  • Murgida, Gustavo E.
  • Bosco, Marta V.
  • Hernández Garrido, Juan Carlos
  • Aguirre, Alejo
  • Calaza, Florencia C.
  • Stacchiola, Dario
  • Ganduglia-Pirovano, M. Verónica
  • Bonivardi, Adrian L.
Copper is one of the goldilocks metals in catalysis. Deciphering the local atomic environment and oxidation state of active centers in supported copper catalysts, as well as the design of materials to control their stability under reaction conditions remains a great challenge today. We show here that a mixed-oxide of copper delafossite with gallium (CuGaO2, Cu1+ and Ga3+) in the form of porous nanoplates, mainly exposing (1 1 0) facets with Cu1+ and Ga3+ cations in well-defined surface positions is a promising material as a model catalyst to explore the activity and stability of Cu1+-activated reactions. It is shown that the delafossite structure is preserved after calcination or reduction pretreatments (in pure O2 or H2, respectively). Extensive reduction of the mixed-oxide leads to a stable catalyst with higher activity for CO oxidation, as a result of the formation of geminal dicarbonyl species on Cuδ+, with 0 < δ < 1, under reaction conditions.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Fine-Tuning Catalysts: The Role of Support Nanomorphology in Shaping Cu/CeO2CO-PROX Properties

  • Fernández Villanueva, Estefanía
  • Pérez Bailac, Patricia
  • Lustemberg, Pablo G.
  • Hungría Hernández, Ana Belén
  • Pascual, Laura
  • Cataluña, Renato
  • Vidal Moya, Jose A.
  • Blasco, Teresa
  • Ganduglia Pirovano, M. Verónica
  • Martínez Arias, Arturo
Understanding how oxide nanomorphology directs metal–support interactions is key to designing selective, low-cost catalysts. The preferential oxidation of CO (CO-PROX) is vital for purifying H2streams for fuel cell applications, as even trace amounts of CO strongly poison the electrode catalysts. Cu/CeO2systems provide a cost-effective alternative to noble metals, yet the influence of ceria morphology on the performance remains unclear. Here, we compare low-loaded Cu catalysts supported on CeO2nanospheres and nanocubes. Although distinct in shape, electron microscopy, low-temperature CO adsorption infrared spectroscopy, and DFT calculations reveal surface reconstructions in nanocubes that diminish structural differences between the two supports. Nevertheless, the Cu/nanosphere catalyst shows higher CO oxidation activity, while the Cu/nanocube catalyst offers superior CO2selectivity and a broader full-conversion temperature window. In situ DRIFTS and DFT spectra attribute these contrasts to stronger CO adsorption sites in the nanocube system. Copper speciation and the nature of surface carbonyls were resolved through complementary techniques, including STEM-HAADF imaging, XEDS mapping, EPR, and CO adsorption IR spectroscopy, together with DFT. These results demonstrate that subtle variations in ceria morphology steer interfacial chemistry and reaction pathways, providing design principles for next-generation Cu-based catalysts for CO-PROX and related oxidation reactions.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Effect of ceria surface modification on Au/TiO2 and Au/YSZ catalysts for the preferential oxidation of CO

  • Manzorro Ureba, Ramón
  • Mora Moreno, Carmen
  • Montes Monroy, José Manuel
  • Goma Jiménez, Daniel
  • Blanco Montilla, Ginesa
  • Trasobares Llorente, Susana
  • Calvino Gámez, José Juan
  • Hungría Hernández, Ana Belén
  • Pérez Omil, José Antonio
  • Martínez Arias, A.
  • Cauqui López, Miguel Ángel
The development of efficient catalysts for CO preferential oxidation (CO-PROX) is crucial for H2 purification in PEMFC technologies. While Au nanoparticles show high activity for low-temperature CO oxidation, their selectivity toward H2 oxidation often decreases at higher temperatures. Modulating the metal-support interaction is key to achieving optimal catalytic performance and stability. Here, we investigate the effect of surface modification with ceria (CeO2) nanostructures on Au/TiO2 (reducible) and Au/YSZ (non-reducible) catalysts. Although the addition of ceria leads into a decrease in the number of active sites (evidenced by metal dispersion and DRIFTS experiments), it boosts CO conversion and selectivity at elevated temperatures, effectively shifting and broadening the optimal operating window to ranges suitable for high-temperature PEMFCs. A comprehensive characterization using STEM and DRIFTS reveals that ceria’s promotional role is highly dependent on the underlying oxide support, influencing both the ceria nanostructure and the electronic properties of the gold nanoparticles, which dictates the overall reaction pathway and catalyst stability. This work provides crucial insight for tailoring Au-based catalysts for diverse CO-PROX operational requirements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vibrational frequencies of CO bound to all three low-index cerium oxide surfaces: A consistent theoretical description of vacancy-induced changes using density functional theory

  • Lustemberg, Pablo G.
  • Yang, C.
  • Wang, Y.
  • Wöll, C.
  • Ganduglia-Pirovano, M. V.
The facet-dependent adsorption of CO on oxidized and reduced CeO2 single crystal surfaces is reviewed, with emphasis on the effect of CO coverage and the ability of state-of-the-art quantum-mechanical methods to provide reliable energies and an accurate description of the IR vibrational frequency of CO. Comparison with detailed, high-resolution experimental infrared reflection absorption spectroscopy data obtained for single crystal samples allows the assignment of the different CO vibrational bands observed on all three low-index ceria surfaces. Good agreement is achieved with the hybrid density functional theory approach with the HSE06 functional and with saturation coverage. It is shown that CO is very sensitive to the structure of cerium oxide surfaces and to the presence of oxygen vacancies. The combined theoretical-experimental approach offers new opportunities for a better characterization of ceria nanoparticles and for unraveling changes occurring during reactions involving CO at higher pressures. © 2023 Author(s)., This project received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 832121, the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation)—Project No. 426888090—SFB 1441, and the National Natural Science Foundation of China (21902005). M.V.G.-P. acknowledges the support by the MICINN-Spain (Grant Nos. RTI2018-101604-B-I00 and PID2021-128915NB-I00) and the International Excellence Fellowship of Karlsruhe Institute of Technology (KIT) funded within the Framework of the University of Excellence Concept “The Research University in the Helmholtz Association I Living the Change” Germany. Computer time provided by FinisTerrae3 at CESGA (Centro de Supercomputación de Galicia) and the RES (Red Española de Supercomputación) resources at MareNostrum 4 (BSC, Barcelona) and LaPalma (IAC, Canarias) nodes is acknowledged., The data that support the findings of this study are openly available in Materials Cloud (https://www.materialscloud.org/home) at http://doi.org/10.24435/materialscloud:7n-7m, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Water and Cu+ Synergy in Selective CO2 Hydrogenation to Methanol over Cu-MgO-Al2O3 Catalysts

  • Fernández-Villanueva, Estefanía
  • Lustemberg, Pablo G.
  • Zhao, M.
  • Soriano Rodriguez, J.
  • Concepción, P.
  • Ganduglia-Pirovano, M. V.
The CO2 hydrogenation reaction to produce methanol holdsgreat significance as it contributes to achieving a CO2-neutral economy.Previous research identified isolated Cu+ species doping the oxide surface of aCu-MgO-Al2O3-mixed oxide derived from a hydrotalcite precursor as theactive site in CO2 hydrogenation, stabilizing monodentate formate species asa crucial intermediate in methanol synthesis. In this work, we present amolecular-level understanding of how surface water and hydroxyl groups playa crucial role in facilitating spontaneous CO2 activation at Cu+ sites and theformation of monodentate formate species. Computational evidence has beenexperimentally validated by comparing the catalytic performance of the Cu-MgO-Al2O3 catalyst with hydroxyl groups against that of its hydrophobiccounterpart, where hydroxyl groups are blocked using an esterification method. Our work highlights the synergistic effect betweendoped Cu+ ions and adjacent hydroxyl groups, both of which serve as key parameters in regulating methanol production via CO2hydrogenation. By elucidating the specific roles of these components, we contribute to advancing our understanding of theunderlying mechanisms and provide valuable insights for optimizing methanol synthesis processes., The authors express their gratitude for the support receivedthrough the grants PID2021-1262350B-C31 and PID2021-128915NB-I00, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”.This study forms part of the Advanced Materials programmeand was supported by MCIN with funding from EuropeanUnion NextGenerationEU (PRTR-C17.11) and Generalitat Valenciana (ref MFA/2022/016). P.G.L. thanks the CSIC forthe extension of the MSCA-IF Grant Agreement No. 832121.E.F.V. thanks UPV for her Margarita Salas postdoctoralfellowship and both Spanish MIU and European UnionNextGenerationEU for the financial support. Computer timeprovided by the RES (Red Españ ola de Supercomputación)resources at Mare Nostrum 4 (BSC, Barcelona) and La Palma(IAC, La Palma) nodes is acknowledged. M.Z. acknowledgesthe China Scholarship Council (CSC) for Ph.D. fellowship(CSC NO. 202006440003). The DFT data that support thefindings of this study are available in Materials Cloud {https://www.materialscloud.org/home} with the identifier DOI:10.24435/materialscloud:tz-pn. The data is also availablefrom the authors upon reasonable request, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Decoupling many-body interactions in the CeO2(111) oxygen vacancy structure with statistical learning and cluster expansion

  • Zhang, Yujing
  • Han, Zhong-Kang
  • Zhu, Beien
  • Hu, Xiaojuan
  • Troppenz, Maria
  • Rigamonti, Santiago
  • Li, Hui
  • Draxl, Claudia
  • Ganduglia-Pirovano, M. V.
  • Gao, Yi
Oxygen vacancies (VO's) are of paramount importance in influencing the properties and applications of ceria (CeO2). Yet, comprehending the distribution and nature of VO's poses a significant challenge due to the vast number of electronic configurations and intricate many-body interactions among VO's and polarons (Ce3+ ions). In this study, we established a cluster expansion model based on first-principles calculations and statistical learning to decouple the interactions among the Ce3+ ions and VO's, thereby circumventing the limitations associated with sampling electronic configurations. By separating these interactions, we identified specific electronic configurations characterized by the most favorable VO-Ce3+ attractions and the least favorable Ce3+-Ce3+/VO-VO repulsions, which are crucial in determining the stability of vacancy structures. Through more than 108 Metropolis Monte Carlo samplings of VO's and Ce3+ ions in the near surface of CeO2(111), we explored potential configurations within an 8 × 8 supercell. Our findings revealed that oxygen vacancies tend to aggregate and are abundant in the third oxygen layer with an elevated VO concentration primarily due to extensive geometric relaxation, an aspect previously overlooked. This work introduces a novel theoretical framework for unraveling the complex vacancy structures in metal oxides, with potential applications in redox and catalytic chemistry., Y. G. acknowledges the support of the National Key R&D Program of China (2023YFA1506900), the National Natural Science Foundation of China (12174408), the Natural Science Foundation of Shanghai (22JC1404200), and the Foundation of Key Laboratory of Low-Carbon Conversion Science & Engineering, Shanghai Advanced Research Institute, Chinese Academy of Sciences (KLLCCSE-202201Z, SARI, CAS). H. L. acknowledges the funding support from the National Key R&D Program of China (2022YFA1504001) and the National Natural Science Foundation of China (22288102, 21935001). M. V. G. P. acknowledges the support of the Grant PID2021-128915NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF, UE., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the Interaction of Nickel and Copper with Ceria on Ethanol Steam Reforming over Ni-Cu-CeO2 Catalysts

  • Pájaro, Karen C.
  • Cortés Corberán, Vicente
  • Martínez Arias, Arturo
Catalysts of nickel-ceria, nickel-copper-ceria, and copper-ceria were explored with respect to their properties for hydrogen production through ethanol steam reforming (ESR). They were prepared by coprecipitation of the components within inverse microemulsions to achieve intimate contact between them, and the catalysts were characterized by N2 adsorption measurements, XRD, Raman spectroscopy, TPR, and XPS. The catalysts were tested for the ESR reaction, and they were regenerated with oxygen when significant deactivation took place, as occurred for the copper-containing systems. In contrast, the nickel–ceria catalyst exhibits a high activity and stability despite the formation of an important amount of carbon deposits during the course of the ESR test. The presence of nickel sites, which strongly interact with the ceria support, and which are affected by the presence of copper, and the limitation of copper for C-C bond breaking are invoked to explain the results obtained on the whole., This work was financed by Projects RTI2018-101604-B-I00 and PID2021-128915NB-I00 of the Spanish Ministry of Science and Innovation (MICINN)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vanadium-containing modified clays as catalysts for acetaldehyde production by ethanol selective oxidation

  • Sabre, Ema V.
  • Casuscelli, Sandra G.
  • Cánepa, Analía L.
  • Cortés Corberán, Vicente
This work investigates use of natural clays as a sustainable raw material to prepare supported vanadium catalysts for the aerobic selective oxidation of ethanol to produce acetaldehyde. As dispersion and nature of the supported V species depend on its interaction with the support surface and its specific surface area, montmorillonite extracted from an Argentinian bentonite clay was pillared with titania, and vanadium was added by wet impregnation to get V/Ti-PILC catalysts. The effects of catalyst V content (0.5 – 2 wt%), reaction temperature (250 – 350 ºC) and O2/ethanol molar ratio (0.5 – 1.5) on their performance for this reaction were studied. Characterization by X-ray diffraction (XRD) and N2 adsorption/desorption isotherms showed that the synthesized catalysts maintained the mesoporous structure after the V addition, though their lamellar structure lost regularity. Under the reaction conditions explored, all the V/Ti-PILC catalysts were active and very selective to acetaldehyde (80 %), their activity increasing with V content. The highest activity was associated with the highest dispersion of isolated tetrahedral vanadium centers, identified by diffuse reflectance UV-Vis, Raman and X-ray photoelectron (XPS) spectroscopies. The highest ethanol conversion (87 %), with 85 % selectivity to acetaldehyde, was reached over the catalyst with 2 wt% of V at 350 ºC with O2/ethanol = 1. The acetaldehyde yield and selectivity values reached are comparable with those reported for related mesoporous catalysts, which allows to consider these supports a sustainable alternative for high surface area supported vanadium catalysts., The authors would like to thank Ministry of Education of Argentina Project PICT 2019-00594, UTN-FRC and CONICET (Argentina), Fundación Carolina (Spain) and Spanish Ministry of Science and Innovation (MICINN) Project PID2021-128915NB-I00 for their financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A CeO2 (100) surface reconstruction unveiled by in situ STEM and particle swarm optimization techniques

  • Zhang, Kai
  • Li, Guanxing
  • Zou, Chen
  • Chen, Shiyuan
  • Li, Songda
  • Han, Zhong-Kang
  • Jiang, Ying
  • Yuan, Wentao
  • Yang, Hangsheng
  • Ganduglia-Pirovano, M. V.
  • Wang, Yong
The reconstruction of the polar CeO2 (100) surface has been a subject of long-standing debates due to its complexity and the limited availability of experimental data. Herein, we successfully reveal a CeO2 (100)-(4 × 6) surface reconstruction by combining in situ spherical aberration-corrected scanning transmission electron microscopy, density functional theory calculations, and a particle swarm optimization-based algorithm for structure searching. We have further elucidated the stabilizing mechanism of the reconstructed structure, which involves the splitting of the filled Ce(4f) states and the mixing of the lower-lying ones with the O(2p) orbitals, as evidenced by the projected density of states. We also reveal that the surface chemisorption properties toward water molecules, an important step in numerous heterogeneous catalytic reactions, are enhanced. These insights into the distinct properties of ceria surface pave the way for performance improvements of ceria in a wide range of applications., Y.W. acknowledges the financial support of the National Natural Science Foundation of China (51971202, 52025011, and 92045301), the Key Research and Development Program of Zhejiang Province (2021C01003), the Zhejiang Provincial Natural Science Foundation of China (LD19B030001), the Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering, and the Fundamental Research Funds for the Central Universities. W.Y. acknowledges the financial support of the National Natural Science Foundation of China (52171019), the Zhejiang Provincial Natural Science Foundation of China (LR23B030004), and the National Key Research and Development Program (2022YFA1505500). Z.-K.H. acknowledges the financial support of the National Nature Science Foundation of China (22302173). M.V.G.-P. thanks the support of the Grant PID2021-128915NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessing vibrational frequencies of CO adsorbed on cerium oxide surfaces using SCAN and r2SCAN functionals

  • Contreras-Payares, Alexander
  • Lustemberg, Pablo G.
  • Ganduglia-Pirovano, M. V.
[DATA AVAILABILITY] The DFT data that support the findings of this study areavailable in Materials Cloud (https://www.materialscloud.org/home) with the following identifier DOI: 10.24435/materialscloud:xy-dd.The data is also available from the corresponding author upon reasonable request., The vibrational frequency of carbon monoxide (CO) adsorbed on ceria-based catalysts serves as a sensitive probe for identifying exposed surface facets, provided that experimental reference data on well-defined single-crystal surfaces and reliable theoretical assignments are available. Previous studies have shown that the hybrid density functional theory approach using the HSE06 functional yields good agreement with experimental observations, whereas the generalized gradient approximation (GGA) with PBE+U does not. In this work, we assess the performance of different exchange–correlation functionals by comparing the meta-GGA functionals SCAN and r2SCAN meta-GGA functionals with HSE06 in predicting CO vibrational frequencies on cerium oxide surfaces. The meta-GGA functionals offer no significant improvement for oxidized CeO2(111) and CeO2(110) surfaces and fail to localize excess charge on the reduced surfaces. Adding a Hubbard U term improves charge localization, but the predicted vibrational frequencies still fall short of HSE06 accuracy. These limitations are attributed to the meta-GGA’s inability to adequately capture facet- and configuration-specific donation and back-donation effects, which influence the C–O bond length and CO force constant upon adsorption. Despite the higher computational cost when used with plane wave basis sets, hybrid DFT remains essential for accurate interpretation of experimental results., We acknowledge support from Grant No. PID2021-128915NB-I00, funded by MCIN/AEI/10.13039/501100011033 and co-financed by ERDF, EU. A.C.-P. gratefully acknowledges the support of the Ramón Areces Foundation for the 2024 doctoral thesis grant in life and material sciences. We also appreciate the computational resources provided by the Red Española de Supercomputación (RES) at the MareNostrum 5 (BSC, Barcelona) node., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering PdAu/CeO2 Alloy/Oxide Interfaces for Selective Methane-to-Methanol Conversion with Water

  • Fernández-Villanueva, Estefanía
  • Ramírez, Pedro J.
  • Lustemberg, Pablo G.
  • Pérez, Rubén
  • Ganduglia-Pirovano, M. V.
  • Rodríguez, José A.
The direct conversion of methane-to-methanol remains a critical challenge in methane valorization. In this study, we unveil the crucial role of PdAu/CeO<inf>2</inf> catalysts in enabling selective methane transformation under mild conditions, using only water as the sole oxidant. Through a combination of experimental techniques, including XPS and catalytic testing, alongside density functional theory (DFT) calculations, we demonstrate that a Pd<inf>0.3</inf>Au<inf>0.7</inf>/CeO<inf>2</inf> catalyst, which predominantly exposes isolated Pd atoms, achieves remarkable methanol selectivity (∼80%) at 500 K with a 1:1 methane-to-water ratio. While Pd/CeO<inf>2</inf> efficiently activates methane, its tendency for overreaction leads to complete methanol decomposition, thereby limiting selectivity. Alloying Pd with Au on ceria mitigates this over-reactivity, preventing methanol degradation while maintaining sufficient catalytic activity. The PdAu/CeO<inf>2</inf> composite exhibits a synergistic effect: Pd in contact with the ceria support facilitates methane activation and water dissociation, while Au fine-tunes reactivity to promote methanol formation. DFT calculations confirm that isolated Pd sites at the PdAu/CeO<inf>2</inf> interface play a key role in balancing activity and selectivity. This work underscores the importance of alloy/oxide interfaces in controlling selective methane conversion with water and offers valuable insights for designing highly efficient catalysts for methanol synthesis. © 2025 The Author(s). Angewandte Chemie International Edition published by Wiley-VCH GmbH., The authors thank J.M. Chavez and R.A. Soler for their help during the initial characterization of the PdAu alloys and PdAu/CeO2 composites, and B. Hammer, M.-P. V. Christiansen, and A. Bruix for their guidance in applying the GOFEE methodology. The research conducted at the Chemistry Division of Brookhaven National Laboratory was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Chemical Sciences, Geosciences, and Biosciences Division, Catalysis Science Program (Grant No. DE-SC0012704). P.J.R. is grateful to Zoneca-CENEX for an internal grant that facilitated part of this research. E.F.V. thanks UPV for her Margarita Salas postdoctoral fellowship (Spanish MIU and European Union-Next Generation EU) and the MOMENTUM Program (MMT-24-ICP-01, Plan de Recuperación, Transformación y Resiliencia – European Union – NextGenerationEU). M.V.G.P. and P.G.L. thank the Grant PID2021-128915NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF, UE. R.P. acknowledges support from the Spanish Ministry of Science and Innovation, through project PID2023-149150OB-I00, and the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2023-001316-M). The authors also acknowledge computational resources provided by the Red Española de Supercomputación (RES) at MareNostrum 4 and 5 (BSC, Barcelona) node and the Centro de Computación Científica-Universidad Autónoma de Madrid (CCC-UAM). Additionally, this research was supported by access to the Galician Supercomputing Center (CESGA) infrastructure, including its FinisTerrae III supercomputer and its permanent data storage system, funded by the Spanish Ministry of Science and Innovation, the Galician Government, and the ERDF., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fine-Tuning Catalysts: The Role of Support Nanomorphology in Shaping Cu/CeO2CO-PROX Properties

  • Fernández-Villanueva, Estefanía
  • Pérez-Bailac, Patricia
  • Lustemberg, Pablo G.
  • Hungría, Ana B.
  • Pascual, Laura
  • Cataluña, Renato
  • Vidal-Moya, J.A.
  • Blasco, Teresa
  • Ganduglia-Pirovano, M. V.
  • Martínez Arias, Arturo
Understanding how oxide nanomorphology directs metal–support interactions is key to designing selective, low-cost catalysts. The preferential oxidation of CO (CO-PROX) is vital for purifying H<inf>2</inf>streams for fuel cell applications, as even trace amounts of CO strongly poison the electrode catalysts. Cu/CeO<inf>2</inf>systems provide a cost-effective alternative to noble metals, yet the influence of ceria morphology on the performance remains unclear. Here, we compare low-loaded Cu catalysts supported on CeO<inf>2</inf>nanospheres and nanocubes. Although distinct in shape, electron microscopy, low-temperature CO adsorption infrared spectroscopy, and DFT calculations reveal surface reconstructions in nanocubes that diminish structural differences between the two supports. Nevertheless, the Cu/nanosphere catalyst shows higher CO oxidation activity, while the Cu/nanocube catalyst offers superior CO<inf>2</inf>selectivity and a broader full-conversion temperature window. In situ DRIFTS and DFT spectra attribute these contrasts to stronger CO adsorption sites in the nanocube system. Copper speciation and the nature of surface carbonyls were resolved through complementary techniques, including STEM-HAADF imaging, XEDS mapping, EPR, and CO adsorption IR spectroscopy, together with DFT. These results demonstrate that subtle variations in ceria morphology steer interfacial chemistry and reaction pathways, providing design principles for next-generation Cu-based catalysts for CO-PROX and related oxidation reactions. © 2025 The Authors. Published by American Chemical Society, E.F.V. acknowledges support from the Margarita Salas postdoctoral fellowship (Spanish MIU and European Union─NextGenerationEU) and the MOMENTUM Program (MMT-24-ICP-01, Plan de Recuperación, Transformación y Resiliencia─European Union─NextGenerationEU). We gratefully acknowledge funding from projects PID2021-128915NB-I00, PID2022-142312NB-I00, and PID2024-162810NB-I00 financed by Ministerio de Ciencia, Innovación y Universidades, and ERDF, EU. Computational resources were provided by the Red Española de Supercomputación (RES) at MareNostrum 4 and 5 (BSC, Barcelona) as well as the Centro de Computación Científica at the Universidad Autónoma de Madrid (CCC-UAM). This research also benefited from access to the Galician Supercomputing Center (CESGA) infrastructure, including the FinisTerrae III supercomputer and its permanent data storage system, funded by the Spanish Ministerio de Ciencia, Innovación y Universidades, the Galician Government, and ERDF., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Discovery of materials for solar thermochemical hydrogen combining machine learning, computational chemistry, experiments and system simulations

  • Perry, Jonathan
  • Molina, Laura
  • Calle, Alberto de la
  • Peño, Raul
  • Jones, Timothy W.
  • Ganduglia-Pirovano, M. Verónica
  • Jiménez-Fernández, Silvia
  • Donne, Scott W.
  • Coronado, Juan M.
  • Bayón, Alicia
This study integrates first-principles calculations, computational chemistry, system simulations, experiments, and machine learning to identify redox perovskite oxides for solar thermochemical hydrogen production. Using two random forest regressions and one classification model, the approach predicts materials’ stability and the enthalpy of oxygen vacancy formation (Δho), a critical property for selecting materials for thermochemical hydrogen production. B-site composition significantly influences Δho predictions. The methodology led to the discovery of Ba<inf>0.875</inf>Ca<inf>0.125</inf>Zr<inf>0.875</inf>Mn<inf>0.125</inf>O<inf>3</inf> (BCZM), which reduces at temperatures up to 250 °C lower than CeO<inf>2</inf> and is expected to outperform other perovskites in water splitting. However, CeO<inf>2</inf> remains the benchmark for solar thermochemical hydrogen production. The combined use of machine learning and DFT calculations refined ∆ho predictions and provided insights into experimental results. This framework not only enhances database creation for material screening but also establishes a novel approach for perovskite discovery for hydrogen production applications., J.P. and T.J. acknowledge that this activity received funding from ARENA as part of ARENA’s Research and Development Program – Renewable Hydrogen for Export. AC and RP gratefully acknowledge the financial support by Programa Atracción de Talento Fellowship of “Comunidad de Madrid” (2022-T1/AMB-23875). J.C., A.B., and A.C. thank Comunidad de Madrid” for the financial support to ACES4NET0-CM project (TEC-2024/ECO-116), through the R&D activities programme “Tecnologías 2024”. SD acknowledges support from the University of Newcastle Priority Research Centre for Frontier Energy Technologies and Utilization. M.V.G.P. thanks for the Grant PID2021-128915NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF, UE. A.B. and L.M. gratefully acknowledge the financial support by Programa de Atracción de Talento Fellowship of “Comunidad de Madrid” (2020-T1/AMB-19884). A.B. also acknowledge the funding from Consolidacion Investigadora Fellowship (CNS2023-144887). We thank B. Baldassarri for helpful discussions. Computer time provided by the RES (Red Española de Supercomputación) resources at MareNostrum (BSC,Barcelona) node is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fenton-like Reactivity on Fe3O4 Nanozymes Driven by Charge Transfer and Interfacial Water

  • Sánchez, Verónica Muriel
  • Lima, Enio
  • Grassano, Juan Santiago
  • Lustemberg, Pablo G.
  • Morales Ovalle, Marco Antonio
  • Vasquez Mansilla, Marcelo
  • Daneri, Juan
  • Estrin, Darío Ariel
  • Winkler, Elin Lilian
  • Ganduglia-Pirovano, M. V.
Magnetite (Fe3O4) nanoparticles, widely recognized as inorganic nanozymes due to their enzyme-like catalytic activity, are emerging as effective heterogeneous catalysts for Fenton-like reactions, in which lattice iron activates hydrogen peroxide (H2O2) to generate reactive oxygen species. While hydroxyl radicals (•OH) are generally considered the primary reactive species, the underlying mechanism-particularly the possible involvement of a high-valent ferryl intermediate (Fe4+═O)-remains under debate. Here, surface-specific spectroscopy with density functional theory (DFT) calculations is used to elucidate the mechanism of H2O2 activation on Fe3O4(001) surfaces. It is found that •OH production is driven by electron transfer from subsurface Fe2⁺ centers to adsorbed H2O2, accompanied by the transient formation of a ferryl species. Moreover, interfacial water plays an active role in modulating surface reactivity and stabilizing key reaction intermediates. These findings clarify the origin of radical formation in Fe3O4 nanozymes and offer mechanistic insight to guide the rational design of next-generation oxide-based catalysts for environmental and biomedical applications., V.M.S., E.L., and J.S.G. contributed equally to this work. The authors thank M. Meier and G. E. Murgida for helpful discussions on the estimation of iron cations’ oxidation states, and T. Soteras for his involvement in the early stages of the research, particularly in reproducing the bulk and reconstructed Fe3O4 (001) surface, in accordance with the literature. J.S.G. gratefully acknowledges the National Agency for the Promotion of Research, Technological Development, and Innovation (Agencia I+d+i), Argentina, for fellowship support. M.V.G.P. and P.G.L. acknowledge funding from Grant PID2021-128915NB-I00, provided by MCIN/AEI/10.13039/501100011033 and co-financed by ERDF, EU. We also acknowledge the computational resources provided by the Red Española de Supercomputación (RES) at the MareNostrum 5 (BSC, Barcelona) node. This research was further supported by a Marie Skłodowska-Curie Actions grant under the NESTOR-H2020-MSCA-RISE- 2020 project [Grant agreement ID: 101007629]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synergistic Effects in Low-Temperature CO Oxidation on Cerium Oxide Surfaces

  • Lustemberg, Pablo G.
  • Yang, Chengwu
  • Wang, Yuemin
  • Ganduglia-Pirovano, M. V.
  • Wöll, Christof
The mechanisms underlying the reaction between carbon monoxide (CO) and activated dioxygen on metal oxide substrates to produce CO2 remain poorly understood, particularly regarding the role of oxygen vacancies and the nature of the activated O2 adsorbate. In this study, we present experimental findings from infrared reflection-absorption spectroscopy on a model system of bulk monocrystalline CeO2(111). Contrary to expectations, exposing the reduced surface to dioxygen (O2) at 80 K does not yield activated oxygen species, such as superoxo or peroxo. Notably, in the presence of adsorbed CO, an unexpected low-temperature oxidation reaction occurs, consuming CO while oxidizing the CeO2 substrate. Since a direct reaction between impinging O2 and adsorbed CO is unlikely at these low temperatures, a novel mechanism is proposed. Extensive spin-polarized density functional theory (DFT) calculations reveal that oxygen vacancies play a critical role in this low-temperature CO oxidation. Initially located in the subsurface region (Vss), these vacancies migrate to the surface (Vs) via a concerted interaction with coadsorbed CO and O2, leading to O2 activation and the formation of superoxo or peroxo species. Detailed analysis identifies key reaction intermediates and quantifies their adsorption energies and activation barriers. Our findings suggest that the peroxo-mediated pathway, with its lower activation barrier, is more favorable for CO oxidation at low temperatures compared to the carbonate pathway. This study provides valuable insights into the dynamic role of subsurface oxygen vacancies in the activation of gaseous O2 and CO oxidation mechanisms on CeO2., M.V.G.P. and P.G.L. acknowledge the Grant PID2021-128915NB-I00 funded by MCIN/AEI/10.13039/501100011033/and by ERDF, UE. M.V.G.P. acknowledges the International Excellence Fellowship of Karlsruhe Institute of Technology (KIT) funded within the Framework of the University of Excellence Concept “The Research University in the Helmholtz Association I Living the Change” Germany. This work was supported by the National Natural Science Foundation of China (21902005) and the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation)─Project-ID 426888090─SFB 1441 (projects A4 and B3). We thank the RES (Red Española de Supercomputación) for providing computer time on the MareNostrum 4 and 5 at the Barcelona Supercomputing Center and the Centro de Computación Científica-Universidad Autónoma de Madrid for their computational resources. Additionally, this research project was also made possible through access granted by the Galician Supercomputing Center (CESGA) to its supercomputing infrastructure. The supercomputer FinisTerrae III and its permanent data storage system have been funded by the Spanish Ministry of Science and Innovation, the Galician Government, and the European Regional Development Fund (ERDF)., Peer reviewed