Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 49
Encontrada(s) 1 página(s)

Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Tesis doctoral (DoctoralThesis)

Magnetic nanoparticles: green synthesis for sustainable remediation and electronics

  • Díaz-Ufano Matesanz, Carlos
Tesis Doctoral inédita leída en la Universidad Autónoma de Madrid, Facultad de Ciencias, Departamento de Física Aplicada. Fecha de Lectura: 01-07-2025., Esta Tesis tiene embargado el acceso al texto completo hasta el 01-01-2027, Uno de los principales desafíos que debe abordar la nanotecnología es la contaminación ambiental. La presencia de sustancias contaminantes en el agua y el suelo, derivadas de la actividad industrial y una gestión ineficiente de los residuos, ha impulsado políticas globales para fomentar el desarrollo tecnológico sostenible. En este contexto, la nanotecnología se presenta como una herramienta capaz de ofrecer soluciones innovadoras y sostenibles. En esta tesis, se ha explorado la síntesis de nanopartículas magnéticas (óxidos, metales y aleaciones) mediante rutas de síntesis que representan una alternativa ecológica a los métodos convencionales. A través de la optimización de parámetros como la concentración de precursores, el uso de surfactantes, recubrimientos, temperatura y disolventes, se han obtenido materiales con propiedades específicas para su aplicación en remediación ambiental y electrónica sostenible. Uno de los hallazgos clave de este trabajo es el papel fundamental de la adsorción como paso esencial en los procesos catalíticos. Los resultados demuestran que cuanto mayor es la cantidad de contaminantes adsorbidos en la superficie de las nanopartículas, mayor es la degradación posterior en procesos de oxidación avanzada. En particular, se ha logrado la eliminación prácticamente total de colorantes como el azul de metileno en tan solo 2 horas. Además, se ha evidenciado que la aplicación de un campo magnético alterno mejora significativamente el proceso en comparación con condiciones de temperatura ambiente, logrando la degradación del doble de contaminante en el mismo tiempo. Otro aspecto fundamental de este trabajo es la preparación de nanopartículas metálicas sin el uso de agentes reductores fuertes. Su tamaño nanométrico facilita el sinterizado, lo que aumenta su conductividad eléctrica y permite su uso como componentes en tintas electrónicas biodegradables. Esta estrategia representa una alternativa ecológica a los materiales conductores tradicionales, reduciendo el impacto ambiental de los residuos electrónicos sin comprometer sus propiedades funcionales. En conclusión, esta investigación pone de manifiesto el potencial de la nanotecnología sostenible para abordar los desafíos ambientales. Mediante el uso de métodos de síntesis ecológicos y la optimización de procesos clave como la adsorción y el sinterizado, este estudio no solo mejora la degradación de contaminantes a través de una mayor actividad catalítica, sino que también abre nuevas posibilidades en el desarrollo de materiales electrónicos biodegradables. Estos hallazgos contribuyen significativamente a la evolución de tecnologías verdes tanto en la remediación ambiental como en la electrónica sostenible
Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

Novel cisplatin-magnetoliposome complex shows enhanced antitumor activity via Hyperthermia

  • Jiménez-López, M. Carmen
  • Moreno-Maldonado, Ana Carolina
  • Martín Morales, Natividad
  • O´Valle, Francisco
  • Ibarra, M. Ricardo
  • Goya, Gerardo F.
  • Molina Pineda Infantas, Ignacio Jesús
This work was supported by grants RTC-2017-6620-1 from the Ministry of Science and Innovation of Spain and H2020-MSCA-RISE-2020 101007629-NESTOR from the European Commision. This work is in partial fulfillment of the requirements of the University of Granada Ph.D. program in Biomedicine towards MCJL degree., There are several methods to improve cancer patient survival rates by inducing hyperthermia in tumor tissues, which involves raising their temperature above 41 °C. These methods utilize different energy sources to deliver heat to the target region, including light, microwaves or radiofrequency electromagnetic fields. We have developed a new, magnetically responsive nanocarrier, consisting of liposomes loaded with magnetic nanoparticles and cis-diamminedichloroplatinum (II) (CDDP), commonly known as Cisplatin. The resulting magnetoliposome (ML) is rapidly internalized by lung and pancreas tumor cell lines, stored in intracellular vesicles, and capable of inducing hyperthermia under magnetic fields. The ML has no significant toxicity both in vitro and in vivo and, most importantly, enhances cell death by apoptosis after magnetic hyperthermia. Remarkably, mice bearing induced lung tumors, treated with CDDP-loaded nanocarriers and subjected to an applied electromagnetic field, showed an improved survival rate over those treated with either soluble CDDP or hyperthermia alone. Therefore, our approach of magnetic hyperthermia plus CDDP-ML significantly enhances in vitro cell death and in vivo survival of treated animals., Ministry of Science and Innovation of Spain RTC-2017-6620-1, H2020-MSCA-RISE-2020 101007629-NESTOR, European Commision, University of Granada
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Next generation of nanozymes: A perspective of the challenges to match biological performance

  • Goya, Gerardo F.
  • Mayoral, Álvaro
  • Winkler, Elin L.
  • Zysler, Roberto Daniel
  • Bagnato, C.
  • Raineri, Mariana
  • Fuentes-García, J. A.
  • Lima Jr., Enio
Nanomaterials with enzyme-like activity have been the spotlight of scientific and technological efforts to substitute natural enzymes, not only in biological research but also for industrial manufacturing, medicine, and environment healing. Notable advancements in this field along the last years relied on to the rational design of single-atom active sites, knowledge of the underlying atomic structure, and realistic ab initio theoretical models of the electronic configuration at the active site. Thus, it is plausible that a next generation of nanozymes still to come will show even improved catalytic efficiency and substrate specificity. However, the dynamic nature of the protein cage surrounding most active sites in biological enzymes adds a flexible functionality that possess a challenge for nanozyme's mimicking of their natural counterparts. We offer a perspective about where the main strategies to improve nanozymes are headed and identify some of the big challenges faced along the road to better performance. We also outline some of the most exciting bio-inspired ideas that could potentially change this field., The authors acknowledge financial support from the EU-Commission (Project Nos. H2020-MSCA-RISE-2020 101007629-NESTOR and 823717-ESTEEM3), the Spanish Ministerio de Ciencia, Innovación y Universidades (Project Nos. RTC-2017-6620-1 and PID2019-106947RB-C21), the Aragon Regional Government (DGA, Project Nos. E28_20R and E13_20R), and Argentinian governmental agency ANPCyT (Project Nos. PICT-2016-0288 and PICT-2015-0883)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Onion-like Fe3O4/MgO/CoFe2O4 magnetic nanoparticles: new ways to control magnetic coupling between soft and hard magnetic phases

  • Nuñez, Jorge M.
  • Hettler, Simon
  • Lima Jr., Enio
  • Goya, Gerardo F.
  • Arenal, Raúl
  • Zysler, Roberto Daniel
  • Aguirre, Myriam H.
  • Winkler, Elin L.
The control of magnetization inversion dynamics is one of the main challenges driving the design of new nanostructured magnetic materials for magnetoelectronic applications. Nanoparticles with an onion-like architecture offer a unique opportunity to expand the possibilities of combining different phases at the nanoscale and also modulating the coupling between magnetic phases by introducing spacers into the same structure. Here, we report the fabrication, by a three-step high temperature decomposition method, of Fe3O4/MgO/CoFe2O4 onion-like nanoparticles and their detailed structural analysis, elemental compositional maps and magnetic response. The core/shell/shell nanoparticles present epitaxial growth and cubic shape with an overall size of (29 ± 6) nm. These nanoparticles consist of a cubic iron oxide core of 22 ± 4nm in size covered by two shells, the inner of magnesium oxide and the outer of cobalt ferrite of thicknesses ∼1 and ∼2.5 nm, respectively. The magnetization measurements show a single reversion magnetization curve and the enhancement of the coercivity field, from HC ∼ 608 Oe for the Fe3O4/MgO to HC ∼ 5890 Oe for the Fe3O4/MgO/CoFe2O4 nanoparticles at T = 5 K, ascribed to the coupling between both ferrimagnetic phases with a coupling constant of Jc = 2 erg cm−2. The system also exhibits an exchange bias effect, where the exchange bias field increases up to HEB ∼ 2850 Oe at 5 K accompanied by the broadening of the magnetization loop of HC ∼ 6650 Oe. This exchange bias effect originates from the freezing of the surface spins below the freezing temperature TF = 32 K that pinned the magnetic moment of the cobalt ferrite shell., The authors acknowledge financial support from Argentinian governmental agency ANPCyT through Grant No. PICT-2019-02059, PICT-2018-02565 and UNCuyo for support through Grants No. 06/C604 and 06/C605. The authors gratefully acknowledge the EU Commission for financial support through MSCA-RISE projects #734187 (SPICOLOST) and #101007629 (NESTOR). SH was supported by the German Research Foundation (DFG project He 7675/1-1). G. F. G. thanks Spanish State Agency AEI for financial support through project PID2019-106947RB-C21. R. A. gratefully acknowledges the support from the Spanish MICINN (PID2019-104739GB-100/AEI/10.13039/501100011033), Government of Aragon (projects DGA E13-20R) and from the European Union H2020 program “ESTEEM3” (Grant number 823717)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring the magnetic and structural properties of manganese/zinc doped iron oxide nanoparticles through microwaves-assisted polyol synthesis

  • Porru, Margherita
  • Morales, María Del Puerto
  • Gallo-Cordova, Álvaro
  • Espinosa, Ana
  • Moros, María
  • Brero, Francesca
  • Mariani, Manuel
  • Lascialfari, Alessandro
  • Ovejero, Jesús G.
Tuning the fundamental properties of iron oxide magnetic nanoparticles (MNPs) according to the required biomedical application is an unsolved challenge, as the MNPs’ properties are affected by their composition, their size, the synthesis process, and so on. In this work, we studied the effect of zinc and manganese doping on the magnetic and structural properties of MNPs synthesized by the microwave-assisted polyol process, using diethylene glycol (DEG) and tetraethylene glycol (TEG) as polyols. The detailed morpho-structural and magnetic characterization showed a correspondence between the higher amounts of Mn and smaller crystal sizes of the MNPs. Such size reduction was compensated by an increase in the global magnetic moment so that it resulted in an increase of the saturation magnetization. Saturation magnetization MS values up to 91.5 emu/g and NMR transverse relaxivities r2 of 294 s−1mM−1 were obtained for Zn and Mn- doped ferrites having diameters around 10 nm, whereas Zn ferrites with diameters around 15 nm reached values of MS∼ 97.2 emu/g and of r2∼ 467 s−1mM−1, respectively. Both kinds of nanoparticles were synthesized by a simple, reproducible, and more sustainable method that makes them very interesting for diagnostic applications as MRI contrast agents., This work was funded by the European Commission through the HOTZYMES Project (H2020-FETOPEN-RIA 829162) and European Research Council (ERC) through the European Union’s Horizon 2020 research and innovation programme (Grant agreement No. 853468). It was also funded by by the Spanish Ministry of Science and Innovation (AEI/FEDER, UE) through PID2020-113480RB-I00 project, and by the Comunidad de Madrid I+D+i grant program Atracción de Talento project 2018-T1/IND-1005, AECC Ideas Semilla 2019 and SEV-2016-0686 projects. It was also funded by the EU project NESTOR (101007629)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic nanofibers for remotely triggered catalytic activity applied to the degradation of organic pollutants

  • Fuentes-García, J. A.
  • Sanz-Sagué, Beatriz
  • Mallada, Reyes
  • Ibarra, M. Ricardo
  • Goya, Gerardo F.
This work reports on the fabrication and characterization of a novel type of electrospun magnetic nanofibers (MNFs), and their application as a magnetically-activable catalysts for degradation of organic pollutants. The magnetic stimulation capability for the catalytic action is provided by iron-manganese oxide (MnxFe2-xO4) magnetic nanoparticles (MNPs) embedded into electrospun polyacrylonitrile (PAN), which provides stability and chemical resistance. The MNPs (average size d = 40 ± 7 nm) were first obtained by a green and fast sonochemical route, and subsequently embedded into electrospun PAN nanofibers. The final MNFs showed an average diameter of 760 ± 150 nm, providing a superhydrophobic surface with contact angle (θc = 165°), as well as a considerable amount ( 50 % wt.) of embedded MNPs (Mn0.5Fe2.5O4), thermally stable up to temperatures of 330 °C. The catalytic Fe2+/3+/Mn2+/3+/4+ active centers on the MNPs of MNF’s surface could be remotely activated by alternating magnetic fields (AMF) to degrade the methyl blue (MB). Remarkable stability of the MNFs during heating under extreme pH conditions (3 < pH < 10) was observed along several catalytic cycles. The degradation kinetics in presence of hydrogen peroxide showed followed the Langmuir–Hinshelwood model with an average efficiency > 80 %, after several cycles of reusing the same sample without any regeneration process. The capacity of these materials as a catalytic material with magnetic remote activation makes them appealing for those catalytic applications under conditions of darkness or restrained access, where photocatalytic reaction cannot be achieved., The authors acknowledge financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades, through Projects PDC2021‐121409‐I00 (MICRODIAL) and PID2019-106947RB-C21 (SONOSOME), and the EU Commission for financial support through MSCA-RISE project #101007629 (NESTOR). Access to the facilities of the Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermographical method to assess the performance of magnetic nanoparticles in hyperthermia experiments through spatiotemporal temperature profiles

  • Valdés, Daniela Paola
  • Torres, Teobaldo E.
  • Moreno-Maldonado, A. C.
  • Urretavizcaya, Guillermina
  • Nadal, Marcela S.
  • Vásquez Mansilla, Marcelo
  • Zysler, Roberto Daniel
  • Goya, Gerardo F.
  • De Biasi, Emilio
  • Lima Jr., Enio
The evaluation of the specific power absorption of magnetic nanoparticles (MNPs) for magnetic hyperthermia (MH) applications has been performed through either local temperature probing or magnetic measurements so far. Each of these methods has advantages and drawbacks, and the concurrent use of both techniques offers the most reliable results. In this work, we propose an alternative strategy based on thermographic images to obtain two-dimensional temperature maps that allow the determination of the power absorption and other relevant thermodynamic parameters in MH experiments in a noninvasive way. This procedure and analysis are convenient to determine the heating performance of MNPs under the viscous conditions of in vitro and in vivo assays and to follow the time evolution of the temperature spatial distribution in the sample simultaneously. For this purpose, iron-oxide MNPs with 25-nm average diameter are coated with glucose and dispersed into different 8% polyacrylamide gels, which serve as phantoms that emulate intracellular viscosity. Power absorption experiments are performed under ac magnetic fields ( H = 32 kA/m; f = 350 kHz) and the temperature evolution of the sample is monitored through a commercial thermographic camera (resolution, 240 × 180 pixels; temperature accuracy, 2 K). To complement this simple setup, we design a program consisting of a detailed procedure for extracting graphical information from the video frames and obtaining spatiotemporal temperature profiles. The analysis of these profiles allows us to gather information on temperature, energy, power, and heat flux during the MH experiments. This method and analysis allows us to identify spatial inhomogeneities in samples, such as different local MNP density, which is extremely useful for the development of the therapy in vitro and the application in vivo where MNP aggregation is often present., This work is part of a research project supported by Agencia Nacional de Promoción Científica y Tecnológica (Argentina) under Projects No. PICT-2016-0288 and No. PICT-2015-0883 and UNCuyo’s Project SIIP No. 06/C564. The authors gratefully acknowledge the EU Commission financial support through Project No. H2020- MSCA-RISE-2020 101007629-NESTOR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of temperature and copper doping on the heterogeneous fenton-like activity of CuxFe3-xO4 nanoparticles

  • Nuñez, Nahuel
  • Lima Jr., Enio
  • Vásquez Mansilla, Marcelo
  • Goya, Gerardo F.
  • Gallo-Cordova, Álvaro
  • Morales, María Del Puerto
  • Winkler, Elin L.
Ferrite nanoparticles serve as potent heterogeneous Fenton-like catalysts, producing reactive oxygen species (ROS) for decomposing organic pollutants. We investigated the impact of temperature and copper content on the catalytic activity of nanoparticles with different oxidation states of iron. Via solvothermal synthesis, we fabricated copper-doped magnetite (CuxFe3-xO4) with a Fe2+/Fe ratio ∼ 0.33 for the undoped system. Using a microwave-assisted method, we produced copper-doped oxidized ferrites, yielding a Fe2+/Fe ratio of ∼ 0.11 for the undoped nanoparticles. The ROS generated by the catalyst were identified and quantified by electron paramagnetic resonance, while optical spectroscopy allowed us to evaluate its effectiveness for the degradation of a model organic dye. At room temperature, the magnetite nanoparticles exhibited the most •OH radical production and achieved almost 90 % dye discoloration in 2 h. This efficiency decreased with increasing Cu concentration, concurrently with a decrease in •OH generation. Conversely, above room temperature, Cu-doped nanoparticles significantly enhance the dye degradation, reaching 100 % discoloration at 90 °C. This enhancement is accompanied by a systematic increase in the kinetic constants, obtained from reaction equations, with Cu doping. This study highlights the superior stability and high-temperature catalytic advantages of copper ferrite holding promise for enhancing the performance of nanocatalysts for decomposing organic contaminants., The authors thank to the Argentine government agency ANPCyT for providing financial support for this work through Grants No. PICT-2019-02059, as well as to UNCuyo for their support through Grant No. 06/C029-T1. Additionally, this research received partial funding from Project PDC2021-12109-I00 (MICRODIAL) MCIN/AEI/10.13039/501100011033 through the European Union “NextGenerationEU/PRTR”. Furthermore, the authors acknowledge the support of Project H2020-MSCA-RISE-2020 (NESTOR) PROJECT N° 101007629, funded by the EU-commission., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Disruption of the mitochondrial network in a mouse model of Huntington's disease visualized by in-tissue multiscale 3D electron microscopy

  • Martin-Solana, Eva
  • Casado, Laura
  • Torres, Teobaldo E.
  • Goya, Gerardo F.
  • Fernández-Fernández, María Rosario
  • Fernández, José Jesús
Trabajo presentado a: Instruct Biennial Structural Biology Conference Cascais, Lisbon, Portugal 23 – 24th May 2024., Huntington’s disease (HD) is an inherited neurodegenerative disorder caused by an expanded CAG repeat in the coding sequence of huntingtin protein. Initially, it predominantly affects medium-sized spiny neurons (MSSNs) of the corpus striatum. No effective treatment is still available, thus urging the identification of potential therapeutic targets. While evidence of mitochondrial structural alterations in HD exists, previous studies mainly employed 2D approaches and were performed outside the strictly native brain context. In this study, we adopted a novel multiscale approach to conduct a comprehensive 3D in situ structural analysis of mitochondrial disturbances in a mouse model of HD. We investigated MSSNs within brain tissue under optimal structural conditions utilizing state-of-the-art 3D imaging technologies, specifically FIB/SEM for the complete imaging of neuronal somas and Electron Tomography for detailed morphological examination, and image processing-based quantitative analysis. Our findings suggest a disruption of the mitochondrial network towards fragmentation in HD. The network of interlaced, slim and long mitochondria observed in healthy conditions transforms into isolated, swollen and short entities, with internal cristae disorganization, cavities and abnormally large matrix granules., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., This work was supported through grant A-4206 from Cure Huntington's Disease Initiative (CHDI) Foundation, grant CIVP18A3892 from Fundación Ramón Areces, MSCA-RISE project #101007629 and through grants SAF2017-84565-R, PID2019-106947RBC21, TED2021-132020B-I00, PDC2021-121409-I00 and PID2022-139071NB-I00, funded by MCIN/AEI/10.13039/501100011033, by the European Union through “ERDF A way of making Europe” and by the “European Union NextGenerationEU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Genotoxicity and heating performance of VxFe3-xO4 nanoparticles in health applications

  • Sanz-Sagué, Beatriz
  • Sáenz- Hernández, Amaia
  • Moreno-Maldonado, A. C.
  • Fuentes-García, J. A.
  • Nuñez, Jorge M.
  • Zegura, Bojana
  • Stern, Alja
  • Kolosa, Katja
  • Rozman, Iza
  • Torres, Teobaldo E.
  • Goya, Gerardo F.
The applications of magnetic nanoparticles (MNPs) as biocatalysts in different biomedical areas have been evolved very recently. One of the main challenges in this field is to design affective MNPs surfaces with catalytically active atomic centres, while producing minimal toxicological side effects on the hosting cell or tissues. MNPs of vanadium spinel ferrite (VFe2O4) are a promising material for mimicking the action of natural enzymes in degrading harmful substrates due to the presence of active V5+ centres. However, the toxicity of this material has not been yet studied in detail enough to grant biomedical safety. In this work, we have extensively measured the structural, compositional, and magnetic properties of a series of VxFe3-xO4 spinel ferrite MNPs to assess the surface composition and oxidation state of V atoms, and also performed systematic and extensive in vitro cytotoxicity and genotoxicity testing required to assess their safety in potential clinical applications. We could establish the presence of V5+ at the particle surface even in water-based colloidal samples at pH 7, as well as different amounts of V2+ and V3+ substitution at the A and B sites of the spinel structure. All samples showed large heating efficiency with Specific Loss Power values up to 400 W/g (H0 = 30 kA/m; f = 700 kHz). Samples analysed for safety in human hepatocellular carcinoma (HepG2) cell line with up to 24h of exposure showed that these MNPs did not induce major genomic abnormalities such as micronuclei, nuclear buds, or nucleoplasmic bridges (MNIs, NBUDs, and NPBs), nor did they cause DNA double-strand breaks (DSBs) or aneugenic effects—types of damage considered most harmful to cellular genetic material. The present study is an essential step towards the use of these type of nanomaterials in any biomedical or clinical application., This research was partially funded by Project PDC2021-121 409-I00 (MICRODIAL) MCIN/AEI/10.13039/501100011033 through the European Union “NextGenerationEU”/PRTR”, and H2020-MSCA NESTOR project (101007629), the HE CutCancer project (101079113), ARIS P1-0245, ARIS J1-4395 and ARIS MR grant to IR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of precursor concentration, surfactant and temperature on the size, morphology and nanostructure of zero-valent iron nanocrystals synthesised by a polyol route

  • Díaz-Ufano, Carlos
  • Morales, María Del Puerto
  • Veintemillas-Verdaguer, S.
Iron metal nanoparticles, due to their magnetic properties, reducing power and low toxicity, have numerous applications not only in groundwater and contaminated soil remediation but also in biomedicine as contrast agents in magnetic resonance imaging. However, obtaining this nanomaterial involves the use of strongly reducing, polluting and expensive reagents and high temperatures. Herein, the use of ethylene glycol and diethylene glycol in a strong alkaline medium that allows the direct reduction of iron(II) salts to iron(0) in the absence of any added reducer has been analysed for preparation of well-defined nanoparticles. The key roles of the polyhydroxylated surfactants (D-mannitol, D-mannose, polyvinyl alcohol and polyvinyl pyrrolidone) were identified, and their efficiencies were evaluated. In addition, conclusions have been drawn regarding the existence of a minimum temperature required for the reduction of the precursor, as well as the observation that the size of the nanoparticles increases with reaction temperature. The main result is that by combining surfactants and controlling the reaction temperature, pure cubic iron(0) nanoparticles smaller than 100 nm were obtained, thereby reducing the formation of hydroxylated by-products. The high reactivity, high magnetic response, long-term stability and small size of the iron nanoparticles produced in this work will allow their use in various applications., This research was funded by the Spanish Ministry of Science, grant number PID2020-13480RB-I00 and TED2021-130191B-C43, and by the EU-commission, H2020-MSCA-RISE-2020 (NESTOR) PROJECT No.101007629 and HORIZON-CL4-2021-DIGITAL-EMERGING-01 (HyPELignum), PROJECT No.101070302 (2022\u201326)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Remote-controlled activation of the release through drug-loaded magnetic electrospun fibers

  • Ziegler, Richard
  • Ilyas, Shaista
  • Mathur, Sanjay
  • Goya, Gerardo F.
  • Fuentes-García, J. A.
The integration of magnetic nanoparticles within fibrillar structures represents an interesting avenue for the remotely controlled release of therapeutic agents. This work presents a novel drug release platform based on electrospun magnetic fibers (EMFs) combining drugs, magnetic nanoparticles (MNPs) and mesoporous silica nanoparticles (MSNs) for controlled drug delivery via alternating magnetic fields (AMF). The platform was demonstrated to be versatile and effective for hydrophilic ketorolac (KET) and hydrophobic curcumin (CUR) encapsulation and the major response observed for AMF-triggered release was reached using drug-loaded MSNs within the fibers, providing fine control over drug release patterns. The EMFs exhibited excellent inductive heating capabilities, showing a temperature increase of ∆T up to 8 °C within a 5 min AMF pulse. The system is shown to be promising for applications like transdermal pain management, oncological drug delivery, tissue engineering, and wound healing, enabling precise control over drug release in both spatial and temporal dimensions. The findings of this study offer valuable insights into the development of the next generation of smart drug delivery systems, based in multifunctional materials that can be remotely regulated and potentially revolutionize the field of nanomedicine., The authors acknowledge financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades, through Projects PDC2021-121409-I00 (MICRODIAL) and the EU Commission for financial support through MSCA-RISE project #101007629 (NESTOR)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic Harvesting and Degradation of Microplastics using Iron Oxide Nanoflowers prepared by a Scaled-up Procedure

  • Gallo-Cordova, Álvaro
  • Corrales-Pérez, Belén
  • Cabrero, Paula
  • Force, Carmen
  • Veintemillas-Verdaguer, S.
  • Ovejero, Jesús G.
  • Morales, María Del Puerto
Addressing the ecological risks and human health threats posed by emerging contaminants requires the development of reproducible and scalable materials and technologies. In this context, the performance of multicore flower-shaped nanoparticles (NFs) with approximately 40 nm diameters was assessed for extracting and degrading polyethylene microplastics from cosmetics in water samples. These NFs, exhibiting cooperative magnetic behavior and high magnetic moment per particle, were scaled to grams of product in a larger reactor (1 L), yielding a 91 % mean reproducibility for structural, colloidal and magnetic properties. The NFs were directly attached to microplastic surfaces via ultrasonic treatment and separated using a permanent magnet, demonstrating removal capacities of up to 1000 mgMP/gNF under optimal conditions (pH 7, 10 mg NFs, 30 min, field strength 320 kA/m). Subsequently, microplastics in aqueous suspensions were hydrolyzed at 150 °C followed by mineralization through a Fenton-like reaction catalyzed by the NFs where reactive oxygen species produced, in the presence of H2O2, break the organic molecules. Mineralization yields ranged from 20 % to 75 % at 25 and 90 °C, respectively, with a further increase to 78 % achieved under an alternating magnetic field (60 mT, 100 kHz), obviating the need for high temperatures. These results highlight the potential of NFs and associated technologies in effectively addressing the challenges associated with emerging contaminants, offering promising avenues for environmental remediation and human health protection. © 2024, This work was supported in part by the Spanish Ministry of Science and Innovation through grant Ref. TED2021-130191B-C43 and European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 101007629. The Servicio Interdepartamental de Investigaci´on at the Universidad Aut´onoma de Madrid, the TEM Service at the Centro de Biología Molecular Severo Ochoa (CBMSO, CSIC-UAM), NMR unit from Universidad Rey Juan Carlos, SEM at IMN/CSIC and XRD, FTIR and elemental analysis services at ICMM/CSIC are acknowledged for assistance for the characterization studies., Supplementary data to this article can be found online at https://doi. org/10.1016/j.cej.2024.151725, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic induction heating-assisted synthesis of biodiesel using an alumina/iron oxide nanocatalyst

  • Corrales-Pérez, Belén
  • Vicente, Gemma
  • Morales, María Del Puerto
  • Gallo-Cordova, Álvaro
While generating biodiesel from vegetable oils presents various advantages over fossil fuels, ongoing actions aim to improve the efficiency of this production process. Emphasis is placed on optimizing experimental conditions, including the catalyst selection, reaction media and the energy source for heating and mixing, thereby revealing existing research gaps in biodiesel production. In this sense, we have designed a magnetic nanocatalyst based on iron oxide nanoparticles (IONPs) of 18 nm in diameter incorporated within an alumina matrix of around 500 nm infused with potassium hydroxide that provides the catalyst's mesoporosity and basicity. Magnetization analyses confirmed the superparamagnetic behaviour of the nanocatalyst at room temperature and a saturation magnetisation high enough to ease magnetic recovery for reuse. Additionally, magnetic nanoparticles can serve as nanoheaters when subjected to an alternating magnetic field. The heating efficiency of the isolated IONPs was assessed under various frequency and field conditions, yielding specific absorption rate values of up to 80 W/g. Such heating capacity has allowed the synthesis of fatty acid methyl ester (FAMEs), which constitute the biodiesel at 65 °C under optimal field conditions (100 kHz and 48 kA/m) and ideal reaction parameters: 5 % catalyst, methanol/oil ratio 12:1 and 6 h of reaction, with a conversion of up to 98.6 % determined through NMR characterization of the FAMEs and a 95.6 % yield. FAMEs presence was confirmed by optimizing a swift and efficient FTIR method and their purity by TLC. Overall, the designed nanocatalyst presented for FAME synthesis, which incorporates magnetic separability and effective heating capabilities, holds great promise for cost reduction and process efficiency. © 2024, This research was funded by the Spanish Ministry of Science, grant number PID2020-113480RB-I00, European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 101007629 and Proyecto Estrat´egico Orientado a la Transici´on Ecol´ogica y a la Transici´on Digital 2021, TED2021-130191BC43. Authors also acknowledge the chemical and thermal analysis service at the Institute of Materials Science of Madrid (CSIC) and the NMR unit from Universidad Rey Juan Carlos., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure of ZnxFe3−xO4 nanoparticles studied by neutron diffraction and its relation with their response in magnetic hyperthermia experiments

  • Lohr, Javier
  • Tobia, Dina
  • Torres, Teobaldo E.
  • Rodríguez, Luis M.
  • Puente-Orench, Inés
  • Cuello, Gabriel J.
  • Aguirre, Myriam H.
  • Campo, Javier
  • Aurelio, Gabriela
  • Lima Jr., Enio
The mixed zinc-ferrite spinel magnetic nanoparticles (MNPs) with the general formula ZnxFe3−xO4 are among the most extensively studied families of Fe oxides due to their interesting and diverse chemical, electronic, and magnetic properties. These systems offer the possibility of surface functionalization and possess high biocompatibility, making them highly attractive for applications in biomedicine, such as magnetic fluid hyperthermia (MFH). The efficiency of the MFH process relies on the magnetic, structural and morphological properties of the MNPs. The substitution with the Zn ion and the cationic distribution, as well as the synthesis process employed, have a direct impact on the final properties of these oxides. Therefore, it is essential to have tools that enable a comprehensive characterization of the system to assess its performance in MFH. In this study, we have synthesized four ZnxFe3−xO4 MNP systems using three different methods: two by thermal decomposition at high temperatures, one by co-precipitation, and another by co-precipitation followed by ball milling. We analyze the effect of these various synthesis processes on the magnetic and crystallographic properties, aiming to correlate them with the response of each system in MFH. Neutron diffraction data are employed to determine the cation site occupation and to investigate the correlation with the synthesis method. MFH measurements were conducted in media of diverse viscosities, revealing different values of specific loss power, thus demonstrating a clear dependence on the synthesis process and Zn content., We acknowledge financial support of the European Commission through Marie Skłodowska-Curie Actions H2020 RISE with the projects NESTOR (Grant No. 101007629), SPICOLOST (Grant No. 734187), and ULTIMATE-I (Grant No. 101007825). Also, J.L. and D.T. acknowledge support of ANPCyT though Project No. PICT-2019-01849., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel cisplatin-magnetoliposome complex shows enhanced antitumor activity via Hyperthermia

  • Jiménez-López, M. Carmen
  • Moreno-Maldonado, A. C.
  • Martín-Morales, Natividad
  • O'Valle, Francisco
  • Ibarra, M. Ricardo
  • Goya, Gerardo F.
  • Molina, Ignacio J.
There are several methods to improve cancer patient survival rates by inducing hyperthermia in tumor tissues, which involves raising their temperature above 41 °C. These methods utilize different energy sources to deliver heat to the target region, including light, microwaves or radiofrequency electromagnetic fields. We have developed a new, magnetically responsive nanocarrier, consisting of liposomes loaded with magnetic nanoparticles and cis-diamminedichloroplatinum (II) (CDDP), commonly known as Cisplatin. The resulting magnetoliposome (ML) is rapidly internalized by lung and pancreas tumor cell lines, stored in intracellular vesicles, and capable of inducing hyperthermia under magnetic fields. The ML has no significant toxicity both in vitro and in vivo and, most importantly, enhances cell death by apoptosis after magnetic hyperthermia. Remarkably, mice bearing induced lung tumors, treated with CDDP-loaded nanocarriers and subjected to an applied electromagnetic field, showed an improved survival rate over those treated with either soluble CDDP or hyperthermia alone. Therefore, our approach of magnetic hyperthermia plus CDDP-ML significantly enhances in vitro cell death and in vivo survival of treated animals., This work was supported by grants RTC-2017-6620-1 from the Ministry of Science and Innovation of Spain and H2020-MSCA-RISE-2020 101007629-NESTOR from the European Commision. This work is in partial fulfillment of the requirements of the University of Granada Ph.D. program in Biomedicine towards MCJL degree., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vanadium incorporation in ferrite nanoparticles serves as an electron buffer and anisotropy tuner in catalytic and hyperthermia applications

  • Torres, Teobaldo E.
  • Valdés, Daniela Paola
  • Hettler, Simon
  • Nuñez, Jorge M.
  • Rodrigo, I.
  • Orue, Iñaki
  • García, J. Á.
  • Plazaola, F.
  • Zysler, Roberto Daniel
  • Lima Jr., Enio
  • Aguirre, Myriam H.
  • Goya, Gerardo F.
  • Arenal, Raúl
Cancer research has gradually shifted its focus from individual therapies to a combination of them for enhanced treatment effectiveness. In particular, the increased interest in the field of catalytic medicine through nanozymes proposes promising combinations with photothermal therapy, photodynamic therapy, and magnetic fluid hyperthermia (MFH). Nanozyme activity centers around the hydroxyl radical ˙OH, the most toxic of the reactive oxygen species (ROS). With a synergistic approach in mind, we studied VxFe3−xO4 magnetic nanoparticles (MNPs) as agents for ROS production and heating. These MNPs were exhaustively characterised both morphologically and magnetically. A compositional analysis through electron microscopy and spectroscopy unveils a core–shell structure with a V-rich shell. A study of the power absorption of these MNPs fixed into a gel matrix, emulating cytosol viscosity, provides values of up to 1000 W g−1 for samples with 0.5 wt% MNPs, an AC magnetic field amplitude of 65 mT and a frequency of 350 kHz, typical in the MFH application. A concentration of the ˙OH-adduct of up to 2300 nM has been measured through electron spin resonance analysis as a result of peroxidase-like activity. Through the comparison with similarly-sized ferrite MNPs, we determined that V incorporation lowers the magnetic anisotropy and serves as an electron buffer, explaining the enhanced MFH and ROS-production results., T. E. T. acknowledges funding from the European Union's Horizon Europe Research and Innovation program under the Marie Sklodowska-Curie grant agreement no. 101068591. D. P. V. and J. M. N. thank CONICET-Argentina for their doctoral fellowships. The authors acknowledge funding from projects H2020-MSCA-RISE-2021 ULTIMATE-I project no. 101007825 and H2020-MSCA-RISE-2020 101007629-NESTOR and Basque Government grant no. IT-1005-16. G. F. G. acknowledges the Spanish MICIU PID2019-106947RB-C21/AEI/10.13039/501100011033. R. A. acknowledges the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI/10.13039/501100011033), the U. Zaragoza (14446-UZ2023-CIE-02) and the DGA project E13-23R.TEM and XPS studies were conducted at the Laboratorio de Microscopias Avanzadas (LMA), U. Zaragoza, Spain., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Maghemite and hematite nanowires synthesized by nanocasting: precursor effects on structural and magnetic properties

  • Cuello, Natalia I.
  • Fornasin, Emiliano G.
  • Oliva, Marcos I.
  • Goya, Gerardo F.
  • Marchetti, Gustavo
  • Eimer, Griselda A.
  • Elías, Verónica R.
Data will be made available on request., Mesoporous iron oxides with tailored structural and magnetic properties were synthesized using the SBA-15 silica template and two different iron precursors: Fe(NO3)3·9H2O and Fe(C5H7O2)3, denoted as FeM-1 and FeM-2, respectively. The synthesis involved a two-step impregnation-calcination process followed by silica removal. Comprehensive characterization was performed using techniques such as nitrogen adsorption–desorption isotherms, TEM, SEM-EDX, XRD, XPS, and Mössbauer spectroscopy, as well as magnetic measurements., The results revealed significant differences in structural and magnetic properties between the two samples. FeM-1 exhibited higher structural order, greater homogeneity, and a single-phase α-Fe2O3 composition, whereas FeM-2 showed a bimodal pore size distribution and a dual-phase composition of α-Fe2O3 and ɣ-Fe2O3. Magnetic characterization indicated enhanced magnetization in FeM-2 due to the ferrimagnetic nature of ɣ-Fe2O3, while FeM-1 displayed lower magnetization consistent with the weak ferromagnetic behavior of α-Fe2O3. The combination of structural and magnetic analyses demonstrated the critical role of precursor selection in tuning the material properties for potential applications in catalysis and magnetic devices., The authors are grateful to CONICET, UTN-FRC, and H2020-MSCA-RISE-2020-NESTOR PROJECT 553 N°101007629 for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phase stability and structural evolution of core/shell iron oxide nanoparticles due to oxidative diffusion: Implications for spintronic application

  • Nuñez, Jorge M.
  • Lima Jr., Enio
  • Lohr, Javier
  • Vásquez Mansilla, Marcelo
  • Zysler, Roberto Daniel
  • Tolley, Alfredo
  • Bartolomé, Fernando
  • Rubín, Javier
  • Hettler, Simon
  • Arenal, Raúl
  • Aguirre, Myriam H.
  • Winkler, Elin L.
Core/shell iron oxide nanoparticles are promising candidates for spintronic applications due to their tunable magnetic properties and interfacial exchange interactions that allow the modulation of spin-polarized conduction. However, their performance depends critically on phase stability and structural integrity under fabrication and operating conditions involving thermal and oxidative diffusion. This study examines the transformation of iron oxide nanoparticles induced by oxidative diffusion in thermal annealing from wüstite to hematite through an intermediate (wüstite)-core/(magnetite–maghemite)-shell structure. The nanoparticles exhibit a rounded cubic morphology, with a distorted C2/m FeO phase at the core under compressive strain along (010), while the Fe3O4 shell exhibits tensile strain along (110). Oxygen diffusion occurs preferentially along [100] from the cube faces, influencing shape evolution. The system exhibits an exchange bias field of up to 3 kOe and enhanced magnetic hardening of up to 4 kOe, attributed to interfacial exchange interactions. Higher annealing temperature promotes the formation of γ-Fe2O3 with ordered vacancies. The exchange bias effect persists, even when the FeO core is smaller than 1 nm in size, indicating that the strain stabilizes the antiferromagnetic (AFM) order and enhances core/shell magnetic coupling. As oxidation proceeds, strain is gradually relaxed, and at 873 K, the oxidation to hematite is promoted, characterized by a Morin transition at 245 K. These findings reveal the intricate relationship between oxidation-driven structural evolution and magnetic behavior in engineered nanoparticle systems, underscoring the critical importance of material selection tailored to specific fabrication processes, operating conditions, and device performance requirements., The authors also gratefully acknowledge the European Commission for the financial support under the H2020-MSCA-RISE-2020 (NESTOR) PROJECT No 101007629, H2020-MSCA-RISE-2020 (ULTIMATE-I) Project No 101007825 and H2020-MSCA-RISE-2019 (MELON) Project No 872631. R.A. and S.H. acknowledge the funding by the Gobierno de Aragón (DGA) under project E13-23R and by the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033, and CEX2023-001286-S MICIU/AEI/10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insights into the formation of free radicals using metal ferrite nanocatalysts (MFe2O4, M = Fe, Mn, Zn, Co) prepared by a highly reproducible microwave-assisted polyol method

  • Gallo-Cordova, Álvaro
  • Nuñez, Nahuel
  • Díaz-Ufano, Carlos
  • Veintemillas-Verdaguer, S.
  • Soler-Morala, Jimena
  • Palomares, F. Javier
  • Lima, Enio
  • Winkler, Elin L
  • Morales, María Del Puerto
Metal ferrite nanocatalysts possess renowned catalytic properties in advanced oxidation processes. This study aims to elucidate the impact of various parameters on their catalytic activity by measuring the formation of reactive oxygen species. Utilizing a microwave-assisted polyol method, we designed specific catalysts, demonstrating high reproducibility (>95%) of their structural, colloidal, and magnetic properties. Electron paramagnetic resonance (EPR) analysis described intricate catalytic dynamics influenced by buffer composition, particle size, and transition metal doping. The presence of buffer in the EPR measurement of the maghemite nanocatalyst with a size of 14 ± 3 nm induced a secondary reaction between ˙OOH and the DMPO spin-trap, shielding the radical signal by primarily generating CH3 radicals, potentially hindering degradation. Smaller maghemite nanocatalysts (8 ± 2 nm) exhibited enhanced radical production due to increased surface area. Upon metal doping, manganese enhances ˙OOH radical production, while zinc inhibits ROS formation, and cobalt exerts nuanced influence. Additionally, catalytic efficiency in methylene blue degradation varied with the radical species, highlighting ˙OH radicals' superiority for rapid degradation (1 h) over ·OOH (24 h). Overall, this research provides valuable insights into nanoparticle synthesis, radical formation kinetics, and catalytic performance, contributing to the advancement of sustainable catalysis for environmental remediation., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 101007629 (NESTOR Project), the “Plan de Recuperación, Transformación y Resiliencia” financed by the European Union – NextGenerationEU under the Humidity-Plus project and from the Spanish Government (PID2023-150170OB-I00, TED2021- 130191B-C43) by MCIU/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR. FJP acknowledges financial support from Grants TED2021-132482B-I00 and PID2021-126169OB-I00 funded by MCIN/AEI/10.13039/ 501100011033 and by “ERDF A way of making Europe”. The Servicio Interdepartamental de Investigación at the Universidad Autónoma de Madrid, the TEM Service at the Centro de Biología Molecular Severo Ochoa (CBMSO, CSIC-UAM), and XRD, FTIR and elemental analysis services at ICMM/CSIC are acknowledged for assistance for the characterization studies., The data supporting the findings of this study are included in the article and its ESI.† Additional raw data (e.g., TEM images, FTIR and EPR spectra, and numerical values used in the figures) are available from the corresponding author upon reasonable request., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of photocatalytic activity in transition metal-modified mesoporous silicas: fine-tuning properties to elucidate radical reaction pathways by EPR

  • Viale, Fabrizio E.
  • Winkler, Elin L.
  • Lima Jr., Enio
  • Goya, Gerardo F.
  • Benzaquén, Tamara B.
  • Elías, Verónica R.
  • Eimer, Griselda A.
  • Ferrero, Gabriel O.
Ti/Z-based (Z = Co, Cu or Mn) SBA-15-type mesoporous photocatalysts were synthesized via wet impregnation. The materials were then characterized to study their morphology by TEM and photochemical properties through electron paramagnetic resonance (EPR) using the 5,5-dimethyl-1-pyrroline N-oxide (DMPO) spin trapping agent in aqueous dimethyl sulfoxide (DMSO) solution at room temperature. Tests with radical scavengers were carried out, which allowed identification of radical recombination processes and assessment of the radical pathways promoted by the materials. Both Cu and Mn were effective in enhancing the photoactivity of Ti-based materials, with Cu intensifying the hydroxyl path and Mn showing affinity towards superoxide. Meanwhile, Co did not increase the photoactivity compared to Ti-modified mesoporous photocatalysts. As the Ti/Mn-modified mesoporous photocatalyst was the most active photocatalytic material, further modifications with different calcination heating rates or Mn loads were tested. Materials synthesized with a heating rate of 8 °C min−1 presented the largest photoactivity, reaching a maximum with a 10 wt% nominal Mn load, which also shows high affinity for the superoxide radical reaction pathway. Instead, a 2.5 wt% nominal Mn load with a heating rate of 4 °C min−1 enhanced the generation of hydroxyl radicals. Thus, the photogeneration of different radical species from mesoporous photocatalysts can be driven by the nature and load of metals, as well as the heating rate used for the material modification, leading to different active species on the surface., G. C., E. G. V., G. O. F and G. A. E are members of CONICET. The authors are grateful to CONICET, UTN and H2020-MSCA-RISE-2020-NESTOR PROJECT No. 101007629 for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Correlation between cation distribution and catalytic production of free radicals in mixed ferrite nanoparticles

  • Saleta, Martín Eduardo
  • Torres, Teobaldo E.
  • Tobia, Dina
  • Oliveira de Souza, Danilo
  • Aquilanti, Giuliana
  • Winkler, Elin L.
  • Lima Jr., Enio
The role of divalent 3d Fe, Zn, and Ni metallic ions in heterogeneous Fenton reactions promoted by magnetic nanoparticles with ferrite crystalline structures was studied. The coordination and oxidation state of each cation in the ferrite nanoparticles were determined by analyzing the results of X-ray absorption spectroscopy experiments. The morphology and final composition of each system were determined using transmission electron microscopy (TEM) and particle-induced X-ray emission (PIXE). By correlating these data with the catalytic activity of the nanoparticulated systems to decompose H2O2 in reactive oxygen species (ROS) under acid conditions measured by electron paramagnetic resonance (EPR), it was possible to establish the role of the oxidation state and coordination of the surface metal ions in the ROS species produced, as well as their concentration. The Fe2+ ion in the octahedral coordination plays a major role in the catalytic activity, resulting in an increase in the amount of the OH˙ free radical. At the same time, the presence of Ni2+ and Zn2+ in the octahedral and tetrahedral sites, respectively, apparently has no catalytic effect on the formation of oxygen-based free radicals due to the decomposition of H2O2 detected by EPR experiments., The authors thank Elettra Sincrotrone for the provision of beam time (Proposal 20185378). The ICTP is acknowledged for the travel support. The authors acknowledge V. Tognoli, R. Benavides, C. Pérez and M. Guillén for their valuable technical assistance. We also thank G. Bernardi for his assistance during the PIXE experiments. Dr Roberto Boada is acknowledged for their assistance in EXAFS experiments. Agencia Nacional de Promoción Científica y Tecnológica (ANPCyT) for the financial support of the work through grants No. PICT 2019-1849 and PICT-2019-02059, and Universidad Nacional de Cuyo (UNCuyo) grants C050-T1, 06/C027-T1 and 06/C029-T1. The authors also gratefully acknowledge the European Commission for the financial support under the H2020-MSCA-RISE-2020 (NESTOR) Project No. 101007629., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Designing a photocatalyst: Relationship between surface species and specific production of desired ROS

  • Viale, Fabrizio E.
  • Elías, Verónica R.
  • Benzaquén, Tamara B.
  • Goya, Gerardo F.
  • Eimer, Griselda A.
  • Ferrero, Gabriel O.
Bimetallic mesoporous photocatalysts were synthesized via a wet impregnation method using SBA-15 as a support, and characterized by UV–visible diffuse reflectance spectroscopy, low-angle X-ray diffraction and N2 physisorption. Among the tested materials, the Ti/Mn combination exhibited the highest photocatalytic activity in azo dye degradation. To understand this enhanced performance, catalysts with varying Mn loads and calcination ramps were evaluated. Additionally, experiments with radical scavengers (isopropanol, chloroform) and under N2 insufflation were conducted to identify the active radical species. Catalysts prepared with low Mn content and higher calcination ramps showed the greatest activity, which significantly decreased with isopropanol, indicating hydroxyl radicals as the main reactive species. In contrast, samples with higher Mn content and quicker heating displayed reduced activity in the presence of chloroform, suggesting superoxide radical involvement. Spectroscopic analyses (XPS, UV–Vis DRS) revealed that increasing Mn load promotes the formation of Mn2+ over Mn4+ species and lowers the band gap energy. These findings highlight the direct correlation between synthesis parameters, surface composition and optical properties, providing a strategy for fine-tuning the performance of a photocatalyst., This research was funded by Agencia Nacional de Promoción de la Investigación, el Desarrollo Tecnológico y la Innovación through the PICT-2021-GRFTI Project No. 00568 project and European Commission through H2020-MSCARISE-2020-NESTOR Project No. 101007629., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Zero-Valent Iron Nanocatalysts via Polymers or Metal Hydroxide Passivation: Implications for Advanced Oxidation Processes

  • Díaz-Ufano, Carlos
  • Nuñez, Nahuel
  • Gallo-Cordova, Álvaro
  • Winkler, Elin L
  • Morales, María Del Puerto
  • Veintemillas-Verdaguer, S.
Zero-valent iron (ZVI) nanocatalysts are promising materials for environmental remediation (e.g., wastewater treatment) via advanced oxidation processes (AOPs) due to their ability to generate reactive oxygen species (ROS). However, their high reactivity often leads to rapid surface oxidation and a limited stability. This study evaluates the effect of different surface coatings on the stability and ROS production of ZVI nanocatalysts. The coatings tested include organic molecules such as mannitol and polyvinylpyrrolidone (PVP), as well as combinations with thin layers of metal hydroxides (M-(OH)2, where M = Ni or Mn). Hydroxyl radical (•OH) generation was quantified using electron paramagnetic resonance (EPR) spectroscopy over a period of 0 to 7 days in acetate buffer (pH 5). Results show that incomplete PVP coverage leads to a 90% decrease in ROS production within 24 h, while full coverage preserves catalytic activity for at least 1 day. Among inorganic coatings, Mn-(OH)2 maintained stable ROS generation for 7 days, whereas Ni-(OH)2 showed significant degradation after 24 h. These findings highlight the importance of coating selection and surface passivation to enhance ZVI stability and extend its catalytic performance in AOP applications, providing design guidelines for nanocatalysts in Fenton-like processes for water purification and environmental remediation., This research was funded by the MICIU/AEI/10.13039/501100011033, the EU-NextGenerationEU/PRTR project TED2021-130191B-C43, and the EU-commission, H2020-MSCA-RISE-2020 (NESTOR) PROJECT No. 101007629 and HORIZON-CL4-2021-DIGITAL-EMERGING-01 (HyPELignum) PROJECT No. 101070302 (2022–26). Authors also acknowledge the Severo Ochoa Centres of Excellence program through grant CEX2024-001445-S., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fenton-like Reactivity on Fe3O4 Nanozymes Driven by Charge Transfer and Interfacial Water

  • Sánchez, Verónica Muriel
  • Lima, Enio
  • Grassano, Juan Santiago
  • Lustemberg, Pablo G.
  • Morales Ovalle, Marco Antonio
  • Vasquez Mansilla, Marcelo
  • Daneri, Juan
  • Estrin, Darío Ariel
  • Winkler, Elin Lilian
  • Ganduglia-Pirovano, M. V.
Magnetite (Fe3O4) nanoparticles, widely recognized as inorganic nanozymes due to their enzyme-like catalytic activity, are emerging as effective heterogeneous catalysts for Fenton-like reactions, in which lattice iron activates hydrogen peroxide (H2O2) to generate reactive oxygen species. While hydroxyl radicals (•OH) are generally considered the primary reactive species, the underlying mechanism-particularly the possible involvement of a high-valent ferryl intermediate (Fe4+═O)-remains under debate. Here, surface-specific spectroscopy with density functional theory (DFT) calculations is used to elucidate the mechanism of H2O2 activation on Fe3O4(001) surfaces. It is found that •OH production is driven by electron transfer from subsurface Fe2⁺ centers to adsorbed H2O2, accompanied by the transient formation of a ferryl species. Moreover, interfacial water plays an active role in modulating surface reactivity and stabilizing key reaction intermediates. These findings clarify the origin of radical formation in Fe3O4 nanozymes and offer mechanistic insight to guide the rational design of next-generation oxide-based catalysts for environmental and biomedical applications., V.M.S., E.L., and J.S.G. contributed equally to this work. The authors thank M. Meier and G. E. Murgida for helpful discussions on the estimation of iron cations’ oxidation states, and T. Soteras for his involvement in the early stages of the research, particularly in reproducing the bulk and reconstructed Fe3O4 (001) surface, in accordance with the literature. J.S.G. gratefully acknowledges the National Agency for the Promotion of Research, Technological Development, and Innovation (Agencia I+d+i), Argentina, for fellowship support. M.V.G.P. and P.G.L. acknowledge funding from Grant PID2021-128915NB-I00, provided by MCIN/AEI/10.13039/501100011033 and co-financed by ERDF, EU. We also acknowledge the computational resources provided by the Red Española de Supercomputación (RES) at the MareNostrum 5 (BSC, Barcelona) node. This research was further supported by a Marie Skłodowska-Curie Actions grant under the NESTOR-H2020-MSCA-RISE- 2020 project [Grant agreement ID: 101007629]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Safety of ferrite nanoparticles for biomedical applications: Cyto- and genotoxic effects of MxFe3-xO4 (M = Fe, Zn, Mn) in an Advanced 3D human hepatic in vitro model

  • Rozman, Iza
  • Gallo-Cordova, Álvaro
  • Morales, María Del Puerto
  • Morales Ovalle, Marco A.
  • Goya, Gerardo F.
  • Kolosa, Katja
  • Hočevar, Domen
  • Zegura, Bojana
  • Stern, Alja
Given the growing interest in nanosized spinel-type ferrite nanoparticles for biomedical applications and the limited information on their safety, this study aimed to assess their cellular and genotoxic effects in an in vitro 3D human hepatic cell model (HepG2 spheroids). Ferrite nanoparticles – γFe2O3 (FeNPs; 14 ± 4 nm), Zn0.7Fe2.3O4 (ZnNPs; 14 ± 5 nm), and Mn0.4Fe2.6O4 (MnNPs; 7 ± 2 nm) – were synthesised through a microwave-assisted polyol route, functionalized with citric acid, and characterised using Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES), Transmission Electron Microscopy (TEM), X-ray Diffraction (XRD), and Fourier Transform Infrared Spectroscopy (FTIR). Nanoparticle uptake was analysed using TEM, cytotoxicity was measured with CellTiter-Glo®, and oxidative stress induction was assessed using the 2′,7′-Dichlorodihydrofluorescein diacetate (DCFH-DA) and malondialdehyde (MDA) assay. Genotoxic effects were evaluated using the comet, γH2AX and p-H3 assays. Cellular stress responses were assessed using toxicogenomic analysis. Significant cytotoxicity of the tested nanoparticles (0.1–250 µg/mL) was observed; however, TEM analysis revealed limited penetration to the outermost cell layers of spheroids. Notably, only FeNPs induced ROS generation, while MDA levels remained unchanged in all tested samples. Low DNA damage was detected at 24 h, but a significant increase was observed at 96 h (5–50 µg/mL). No increase in γH2AX or p-H3 was found. No substantial alterations in DNA damage or oxidative stress-response gene expression were detected. Altogether, our findings suggest that the effects of ferrite nanoparticles are time- and composition-dependent, underlining the importance of further mechanistic and chronic exposure evaluations in 3D cell models., This study was supported by the European Union H2020-MSCA NESTOR project (101007629), the HE CutCancer project (101079113), and the Slovenian Research and Innovation Agency Research Core Funding No. P1–0245, and projects ARIS J1–4395 and ARIS MR grant to IR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

TEM images of HepG2 spheroids exposed to magnetic Ferite-based Nanoparticles MxFe3-xO4 (M=Fe, Zn, Mn) for 24 and 96 hours

  • Morales Ovalle, Marco A.
  • Rozman, Iza
  • Stern, Alja
  • Goya, Gerardo F.
  • Gallo-Cordova, Álvaro
  • Morales, María Del Puerto
  • Zegura, Bojana
Nanosized spinel-type ferrites have gained recognition as a unique class of engineered nanomaterials with promising applications, but their safety profiles remain insufficiently explored. Although iron (Fe), zinc (Zn), and manganese (Mn) are biologically relevant elements, the use of Zn- and Mn-containing ferrite nanoparticles (NPs) in biomedical contexts demands careful (geno)toxicity evaluation. In this study, three ferrite NPs – γFe2O3 (FeNPs), Zn0.7Fe2.3O4 (ZnNPs), and Mn0.4Fe2.6O4 (MnNPs) – synthesised through a microwave-assisted polyol route, functionalized with citric acid to improve colloidal stability, were evaluated for their potential (geno)toxic effects in an advanced in vitro 3D cell model, HepG2 spheroids. To assess the spatial distribution of the tested NPs within the 3D cellular architecture of HepG2 spheroids, TEM analysis was performed after 24 and 96 hours of exposure. HepG2 spheroids were exposed to each NP type at a concentration of 50 µg/mL. Following incubation, spheroids were collected, gently washed with phosphate-buffered saline (PBS, pH 7.4) to remove unbound NP, and fixed in 2 % glutaraldehyde in 0.1 M phosphate buffer (PB, pH 7.2) for 2 hours at room temperature, followed by incubation in 1.5 % glutaraldehyde in 0.05 M PB at 4°C overnight. Post-fixation was carried out with 1% osmium tetroxide for 1 hour at room temperature, followed by dehydration through a graded ethanol series (30%, 50%, 70%, 90%, and absolute ethanol) and infiltration with epoxy resin. For cross-sectional analysis, resin-embedded spheroids were polymerised at 60 °C for 48 hours, and ultrathin sections (~70 nm) were obtained using an ultramicrotome. Sections were collected on copper grids and stained with uranyl acetate (2% aqueous) and lead citrate to enhance contrast. Imaging was performed using a Tecnai T20 transmission electron microscope (Thermo Fisher Scientific, USA) operated at 200 kV. For each sample and time point, at least three spheroids were analysed. Additionally, in one selected spheroid, a systematic series of TEM images was acquired along a straight linear trajectory across the section, beginning at one external edge of the spheroid and progressing through consecutive adjacent fields until reaching the opposite border, and then the images were composed into a single frame., HE CutCancer project (101079113). H2020-MSCA NESTOR project (101007629). The Slovenian Research and Innovation Agency, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

DNA Damage Induction After Exposure to Ferrite Nanoparticles for biomedical applications (MxFe3-xO4, M = Fe, Zn, Mn) in an Advanced 3D Human Hepatic in vitro Model

  • Rozman, Iza
  • Stern, Alja
  • Zegura, Bojana
  • Gallo-Cordova, Álvaro
  • Morales, María Del Puerto
  • Hočevar, Domen
  • Goya, Gerardo F.
Nanosized spinel-type ferrites have gained recognition as a unique class of engineered nanomaterials with promising applications, but their safety profiles remain insufficiently explored. Although iron (Fe), zinc (Zn), and manganese (Mn) are biologically relevant elements, the use of Zn- and Mn-containing ferrite nanoparticles in biomedical contexts demands careful (geno)toxicity evaluation. In this study, three ferrite nanoparticles – γFe2O3 (FeNPs), Zn0.7Fe2.3O4 (ZnNPs), and Mn0.4Fe2.6O4 (MnNPs) – synthesised through a microwave-assisted polyol route, functionalized with citric acid to improve colloidal stability, were evaluated for their potential (geno)toxic effects in an advanced in vitro 3D cell model, HepG2 spheroids. DNA damage induction was studied using the alkaline comet assay. After 24 and 96 hours of exposure, spheroids were dissociated into a single-cell suspension by collagenase treatment. Each spheroid was incubated in 0.25% trypsin–EDTA for 3 minutes and then gently dissociated into a single-cell suspension using cut pipette tips. After this the comet assay was conducted under conditions described in the Supplement material (Table 1). The cell suspension was combined with 1% low-melting-point (LMP) agarose and layered onto fully frosted slides pre-coated with 1% normal-melting-point (NMP) agarose. Slides were lysed, the nucleoids unwound and electrophoresis preformed, followed by neutralisation of the gells., Table 1: Comet assay conditions. For comet scoring, gells were stained using the GelRed nucleic acid stain (Biotium, USA) according to the manufacturer's instructions. Analysis and scoring were performed using a fluorescent microscope and Comet Assay IV software (Instem, Philadelphia, USA). A positive (30 and 5 µM benzo[a]pyrene; BaP for 24 and 96 hours, respectively) control was included. Each experiment was conducted independently three times, analysing 50 nuclei per experimental point from a poled sample of 3-4 spheroids. The datasets represent the exported analysis performed in Comet Assay IV., NESTOR - Nanomaterials for Enzymatic Control of Oxidative Stress Toxicity and Free Radical Generation 101007629. European Commission CutCancer - TWINNING FOR EXCELLENCE TO STRATEGICALLY ADVANCE RESEARCH IN CARCINOGENESIS AND CANCER 101079113. The Slovenian Research and Innovation Agency, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Transcriptomic responses of oxidative and genotoxic stress responsive genes after exposure to MxFe3-xO4 (M = Fe, Zn, Mn) in an Advanced 3D Human Hepatic in vitro Model Authors/Creators

  • Rozman, Iza
  • Stern, Alja
  • Zegura, Bojana
  • Goya, Gerardo F.
  • Gallo-Cordova, Álvaro
  • Morales, María Del Puerto
Nanosized spinel-type ferrites have gained recognition as a unique class of engineered nanomaterials with promising applications, but their safety profiles remain insufficiently explored. Although iron (Fe), zinc (Zn), and manganese (Mn) are biologically relevant elements, the use of Zn- and Mn-containing ferrite nanoparticles in biomedical contexts demands careful (geno)toxicity evaluation. In this study, three ferrite nanoparticles – γFe2O3 (FeNPs), Zn0.7Fe2.3O4 (ZnNPs), and Mn0.4Fe2.6O4 (MnNPs) – synthesised through a microwave-assisted polyol route, functionalized with citric acid to improve colloidal stability, were evaluated for their potential (geno)toxic effects in an advanced in vitro 3D cell model, HepG2 spheroids. Cellular stress responses upon exposure to the particle were assessed using toxicogenomic analysis.This approach allows the identification of early molecular events that may precede overt toxicity, supporting a mechanistic understanding of adverse outcomes and facilitating the development of predictive biomarkers for hazard assessment. In the present study, the expression of selected DNA damage-responsive genes (TP53, MDM2, GADD45a, CDKN1A, OGG1, and JUNB), apoptosis-related genes (BCL2 and BAX) and oxidative stress response genes (SOD1, CAT, GPX1, GCLC, and GSR) was evaluated. The expression of the selected genes after exposure to the tested nanoparticles was analysed by qPCR primer assays (Applied Biosystems, USA) and One 48.48 Dynamic Array IFC for Gene Expression (Fluidigm, USA). After 24 and 96 hours of exposure, the spheroids were collected, and total RNA was isolated using the RNeasy Mini Kit from Qiagen (Qiagen, Germany) according to the manufacturer's instructions. 10 µg/mL etoposide served as athe positive control for the toxicogenomic analysis. RNA concentration and purity were assessed using a NanoDrop 1000 spectrophotometer (Thermo Fisher Scientific) by measuring absorbance at 260/280 nm and gele efectrophoresis (Figure 1). Reverse transcription of 1 µg total RNA per sample was performed with the High-Capacity cDNA Reverse Transcription Kit (Applied Biosystems, MA, USA) on a BIO-RAD T100 thermal cycler under conditions listed in Table 3. For preamplification, 4 µL of each of the 24 selected TaqMan assays (SM2) were pooled into a primer mix. The reaction mixture was prepared using TATAA PreAmp GrandMasterMix (Tataa Biocenter, Sweden), the primer pool, and nuclease-free water, following manufacturer instructions. Negative controls (NTC for preamplification and NTCq for qPCR) were included. Each reaction contained 8 µL of mix and 2 µL of 5× diluted cDNA, processed in a 96-deep well plate, sealed, vortexed, and centrifuged (1000 g, 1 min). Preamplification was carried out on a BIO-RAD T100 thermal cycler under conditions in Table 4. Gene expression analysis used TaqMan Universal PCR Master Mix and TaqMan Gene Expression Assays (Table 6). Preamplified samples were diluted 10× with nuclease-free water. Assays were prepared by mixing equal volumes (6 µL) of each assay with Fluidigm Assay Loading Reagent Kit – 10IFCS. The reaction premix combined DNA Sample Loading Reagent and Fast Probe Master Mix (Biotium/Roche) and was added to each diluted cDNA sample. qPCR was performed on 48.48 Dynamic Array™ IFC chips using the Fluidigm BioMark™ HD System under conditions in Table 5. Data were analysed with Fluidigm Gene Expression Analysis Software and quantGenious. Fold changes >1.5 or <0.66 were considered biologically relevant. Statistical significance between NP-exposed cells and solvent controls was assessed using ANOVA and Dunnett’s test in GraphPad Prism v9 (GraphPad Software, CA, USA)., NESTOR - Nanomaterials for Enzymatic Control of Oxidative Stress Toxicity and Free Radical Generation 101007629. European Commission CutCancer - TWINNING FOR EXCELLENCE TO STRATEGICALLY ADVANCE RESEARCH IN CARCINOGENESIS AND CANCER 101079113. The Slovenian Research and Innovation Agency., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Defining the sonochemical threshold for phase-pure Fe3O4 nanoparticle synthesis

  • Morales Ovalle, Marco A.
  • Lima Jr., Enio
  • Goya, Gerardo F.
This study systematically examines the sonochemical synthesis of Fe3O4 nanoparticles as a function of precursor concentration, alkalinity, reagent-addition mode, and effective irradiation time. The central result is that complete Fe(OH)2 conversion into Fe3O4 during sonication determines phase purity and reproducibility. When this threshold is not reached, residual precursor continues to transform during post-synthesis handling, so washing acts not as a passive purification step but as a secondary conversion stage in incompletely converted systems. For phase-pure samples obtained after complete sonochemical conversion, faceted Fe3O4 nanoparticles with tunable sizes from 18(6) to 60(20) nm were reproducibly obtained. In these samples, SLP follows the expected size dependence under fixed AMF conditions. In contrast, for incomplete sonochemical conversion systems, the evolving Fe3O4 fraction makes SLP normalization unstable, and the absorbed power normalized by total iron (SPI) provides a more robust metric. Across these dynamic systems, SPI correlates with XRD microstrain, indicating that structurally defective secondary magnetite formed during post-irradiation conversion correlates to heating efficiency. These results define the process window required for reproducible sonochemical Fe3O4 synthesis and clarify how incomplete precursor conversion biases both structural and hyperthermia analyses., This research was funded by the H2020-MSCA NESTOR project (101007629). Marco Antonio Morales Ovalle specially recognizes the financial support of the National Scientific and Technical Research Council of Argentina (CONICET) through a PhD fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetically enhanced Fenton-like processes by nanofibers: real-time observation of tetracycline degradation in pig manure wastewater

  • Centro Elia, Berta
  • Morales Ovalle, Marco A.
  • Franco, Vanina G.
  • Fuentes-García, J. A.
  • Goya, Gerardo F.
This work investigates the degradation of tetracycline (TC) in pig manure wastewater by a magnetically assisted heterogeneous Fenton-like process using MnFe2O4 magnetic nanoparticles (MNPs) embedded into polyacrylonitrile nanofibers (MNFs), resulting in flexible mats with high magnetic heating capacity (SLP ≈ 2.2 kW/g in air). TC degradation was monitored in real time by UV – Vis spectroscopy, showing that the MNF/H2O2 system could reduce the TC concentration from [TC]0≈6⁢𝜇⁢𝑔/mL to [TC]≈50ng/mL after 40ℎ, corresponding to a >99⁢&percnt removal. Control (blank) PAN fibres showed only a slow adsorption/degradation rate of ≈8ng/mL⋅ℎ. The degradation kinetics displayed three regimes: an induction time (∼5ℎ), followed by accelerated degradation and late-time deactivation. A heterogeneous dynamic kinetic model (DKM) was used to describe the degradation mechanism, incorporating reactive oxygen species (ROS) generation, catalyst surface inactivation, and polymer stripping effects. The application of an alternating magnetic field (H0=32kA/m⁢𝑓=450kHz) shortened the induction period from several hours to minutes, through the local heating of the MNFs (up to ≈51 °C). For a concentrated pig-manure filtrate ([TC]0≈0.32⁢𝜇⁢𝑔/mL), circulation through MNFs with H2O2 resulted in ≈50⁢&percnt TC removal. We propose that the degradation process was driven by hydroxyl radical (•OH) formation through hydrogen peroxide (H2O2) activation on the MNPs surface. The magnetically triggerable Mn2FeO4@PAN nanofibers show that heterogeneous Fenton catalysis can be synergistically combined with localized magnetic heating to accelerate antibiotic degradation, offering a scalable, reusable and efficient alternative for antibiotic-contaminated wastewater with reduced iron sludge versus conventional homogeneous Fenton process., This research was funded by Project PDC2021-121409-I00(MICRODIAL) MCIN/AEI/10.13039/501100011033 through theEuropean Union ‘NextGenerationEU’/PRTR’, and H2020-MSCANESTOR project (101007629). M.A.M.O. acknowledgesfinancial support from CONICET (Argentina) through a doctoralfellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Glucose coated FeO@Fe3O4 nanoparticles show tunable catalytic reactivity and safety in a 3D hepatic in vitro model

  • Morales Ovalle, Marco A.
  • Rozman, Iza
  • Winkler, Elin L.
  • Lima Jr., Enio
  • Štern, Alja
  • Kološa, Katja
  • Žegura, Bojana
  • Goya, Gerardo F.
Iron-oxide magnetic nanoparticles (MNPs) have been extensively investigated as magnetically actuated nanocatalysts for diagnostic and therapeutic applications. However, because wüstite/magnetite/maghemite phases can interconvert, coexisting Fe2+/Fe3+ species may redirect Fenton-like chemistry and generate reactive oxygen species (ROS) profiles that differ from the intended biocatalytic pathway. Here, we investigate monodisperse biphasic FeO@Fe3O4 core-shell MNPs with an average particle size ⟨d⟩ = 9.6(5) nm, and their glucose-coated analogue, combining EPR radical analysis with toxicity testing in a 3D HepG2 hepatic spheroid model. Naked particles exhibited conventional Fenton-like behavior dominated by hydroxyl radicals (⋅OH), whereas glucose coating markedly suppressed ⋅OH while increasing hydroperoxyl radicals (⋅OOH; ≈55 pM at 60 min), demonstrating ligand-controlled rerouting of the radical pathway. TEM mapping across spheroid cross-sections showed preferential MNP accumulation in the outer layer, with most observed events confined to the outer ≈10–15 μm, corresponding to an approximately one-cell-thick rim; sparse deeper events were observed up to ≈30–35 μm. MNPs produced dose- and time-dependent cytotoxicity in HepG2 spheroids, with IC50 values of 29.3 (24 h) and 10.8 (96 h) µg·cm− 2, without evidence of lipid peroxidation or genotoxicity. MDA levels remained unchanged, the comet assay showed no increase in DNA damage, and γH2AX and phospho-H3 (p-H3) positive events were not detected. Our results show that glucose functionalization provides a simple route to modulate radical pathways and define operational windows for redox-active FeO@Fe3O4 nano-reactors in oxidative nanomedicine., This research was funded by H2020-MSCA NESTOR project (101007629), the HE CutCancer project (101079113), ARIS P1-0245, ARIS J1-4395, ARIS MR grant to IR. E.L. and E.L.W: acknowledge financial support from PICT-2019-02059., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Next generation of nanozymes: a perspective of the challenges to match biological performance

  • Goya, G. F.
  • Mayoral, A.
  • Winkler, E.
  • Zysler, R. D.
  • Bagnato, C.
  • Raineri, M.
  • Fuentes-García, J. A.
  • Lima, E.
Nanomaterials with enzyme-like activity have been the spotlight of scientific and technological efforts to substitute natural enzymes, not only in biological research but also for industrial manufacturing, medicine, and environment healing. Notable advancements in this field along the last years relied on to the rational design of single-atom active sites, knowledge of the underlying atomic structure, and realistic abinitio theoretical models of the electronic configuration at the active site. Thus, it is plausible that a next generation of nanozymes still to come will show even improved catalytic efficiency and substrate specificity. However, the dynamic nature of the protein cage surrounding most active sites in biological enzymes adds a flexible functionality that possess a challenge for nanozyme’s mimicking of their natural counterparts. We offer a perspective about where the main strategies to improve nanozymes are headed and identify some of the big challenges faced along the road to better performance. We also outline some of the most exciting bio-inspired ideas that could potentially change this field.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tailoring the Magnetic and Structural Properties of Manganese/Zinc Doped Iron Oxide Nanoparticles through Microwaves-Assisted Polyol Synthesis

  • Porru, Margherita
  • Morales, María del Puerto
  • Gallo-Cordova, Alvaro
  • Espinosa, Ana
  • Moros, María
  • Brero, Francesca
  • Mariani, Manuel
  • Lascialfari, Alessandro
  • Ovejero, Jesús G.
Tuning the fundamental properties of iron oxide magnetic nanoparticles (MNPs) according to the required biomedical application is an unsolved challenge, as the MNPs’ properties are affected by their composition, their size, the synthesis process, and so on. In this work, we studied the effect of zinc and manganese doping on the magnetic and structural properties of MNPs synthesized by the microwave-assisted polyol process, using diethylene glycol (DEG) and tetraethylene glycol (TEG) as polyols. The detailed morpho-structural and magnetic characterization showed a correspondence between the higher amounts of Mn and smaller crystal sizes of the MNPs. Such size reduction was compensated by an increase in the global magnetic moment so that it resulted in an increase of the saturation magnetization. Saturation magnetization MS values up to 91.5 emu/g and NMR transverse relaxivities r2 of 294 s−1mM−1 were obtained for Zn and Mn- doped ferrites having diameters around 10 nm, whereas Zn ferrites with diameters around 15 nm reached values of MS∼ 97.2 emu/g and of r2∼ 467 s−1mM−1, respectively. Both kinds of nanoparticles were synthesized by a simple, reproducible, and more sustainable method that makes them very interesting for diagnostic applications as MRI contrast agents.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Publisher’s Note: “Next generation of nanozymes: A perspective of the challenges to match biological performance” [J. Appl. Phys. 130, 190903 (2021)]

  • Goya, G. F.
  • Mayoral, A.
  • Winkler, E.
  • Zysler, R. D.
  • Bagnato, C.
  • Raineri, M.
  • Fuentes García, J. A.
  • Lima, E.
Nanomaterials with enzyme-like activity have been the spotlight of scientific and technological efforts to substitute natural enzymes, not only in biological research but also for industrial manufacturing, medicine, and environment healing. Notable advancements in this field along the last years relied on to the rational design of single-atom active sites, knowledge of the underlying atomic structure, and realistic ab initio theoretical models of the electronic configuration at the active site. Thus, it is plausible that a next generation of nanozymes still to come will show even improved catalytic efficiency and substrate specificity. However, the dynamic nature of the protein cage surrounding most active sites in biological enzymes adds a flexible functionality that possess a challenge for nanozyme's mimicking of their natural counterparts. We offer a perspective about where the main strategies to improve nanozymes are headed and identify some of the big challenges faced along the road to better performance. We also outline some of the most exciting bio-inspired ideas that could potentially change this field.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Magnetic nanofibers for remotely triggered catalytic activity applied to the degradation of organic pollutants

  • Fuentes-García, J.A.
  • Sanz, B.
  • Mallada, R.
  • Ibarra, M.R.
  • Goya, G.F.
This work reports on the fabrication and characterization of a novel type of electrospun magnetic nanofibers (MNFs), and their application as a magnetically-activable catalysts for degradation of organic pollutants. The magnetic stimulation capability for the catalytic action is provided by iron-manganese oxide (MnxFe2-xO4) magnetic nanoparticles (MNPs) embedded into electrospun polyacrylonitrile (PAN), which provides stability and chemical resistance. The MNPs (average size d = 40 ± 7 nm) were first obtained by a green and fast sonochemical route, and subsequently embedded into electrospun PAN nanofibers. The final MNFs showed an average diameter of 760 ± 150 nm, providing a superhydrophobic surface with contact angle (θc = 165°), as well as a considerable amount ( 50 % wt.) of embedded MNPs (Mn0.5Fe2.5O4), thermally stable up to temperatures of 330 °C. The catalytic Fe2+/3+/Mn2+/3+/4+ active centers on the MNPs of MNF’s surface could be remotely activated by alternating magnetic fields (AMF) to degrade the methyl blue (MB). Remarkable stability of the MNFs during heating under extreme pH conditions (3 < pH < 10) was observed along several catalytic cycles. The degradation kinetics in presence of hydrogen peroxide showed followed the Langmuir–Hinshelwood model with an average efficiency > 80 %, after several cycles of reusing the same sample without any regeneration process. The capacity of these materials as a catalytic material with magnetic remote activation makes them appealing for those catalytic applications under conditions of darkness or restrained access, where photocatalytic reaction cannot be achieved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of temperature and copper doping on the heterogeneous fenton-like activity of CuxFe3-xO4 nanoparticles

  • Nuñez, Nahuel
  • Lima, Enio
  • Vásquez Mansilla, Marcelo
  • Goya, Gerardo F.
  • Gallo-Cordova, Álvaro
  • Morales, María del Puerto
  • Winkler, Elin L.
Ferrite nanoparticles serve as potent heterogeneous Fenton-like catalysts, producing reactive oxygen species (ROS) for decomposing organic pollutants. We investigated the impact of temperature and copper content on the catalytic activity of nanoparticles with different oxidation states of iron. Via solvothermal synthesis, we fabricated copper-doped magnetite (CuxFe3-xO4) with a Fe2+/Fe ratio ∼ 0.33 for the undoped system. Using a microwave-assisted method, we produced copper-doped oxidized ferrites, yielding a Fe2+/Fe ratio of ∼ 0.11 for the undoped nanoparticles. The ROS generated by the catalyst were identified and quantified by electron paramagnetic resonance, while optical spectroscopy allowed us to evaluate its effectiveness for the degradation of a model organic dye. At room temperature, the magnetite nanoparticles exhibited the most •OH radical production and achieved almost 90 % dye discoloration in 2 h. This efficiency decreased with increasing Cu concentration, concurrently with a decrease in •OH generation. Conversely, above room temperature, Cu-doped nanoparticles significantly enhance the dye degradation, reaching 100 % discoloration at 90 °C. This enhancement is accompanied by a systematic increase in the kinetic constants, obtained from reaction equations, with Cu doping. This study highlights the superior stability and high-temperature catalytic advantages of copper ferrite holding promise for enhancing the performance of nanocatalysts for decomposing organic contaminants.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Genotoxicity and heating Performance of VxFe3-xO4 nanoparticles in Health applications

  • Sanz-Sagué, Beatriz
  • Sáenz-Hernández, Amaia
  • Moreno Maldonado, Ana C.
  • Fuentes-García, Jesús A.
  • Nuñez, Jorge M.
  • Zegura, Bojana
  • Stern, Alja
  • Kolosa, Katja
  • Rozman, Iza
  • Torres, Teobaldo E.
  • Goya, Gerardo F.
The applications of magnetic nanoparticles (MNPs) as biocatalysts in different biomedical areas have been evolved very recently. One of the main challenges in this field is to design affective MNPs surfaces with catalytically active atomic centres, while producing minimal toxicological side effects on the hosting cell or tissues. MNPs of vanadium spinel ferrite (VFe2O4) are a promising material for mimicking the action of natural enzymes in degrading harmful substrates due to the presence of active V5+ centres. However, the toxicity of this material has not been yet studied in detail enough to grant biomedical safety. In this work, we have extensively measured the structural, compositional, and magnetic properties of a series of VxFe3-xO4 spinel ferrite MNPs to assess the surface composition and oxidation state of V atoms, and also performed systematic and extensive in vitro cytotoxicity and genotoxicity testing required to assess their safety in potential clinical applications. We could establish the presence of V5+ at the particle surface even in water-based colloidal samples at pH 7, as well as different amounts of V2+ and V3+ substitution at the A and B sites of the spinel structure. All samples showed large heating efficiency with Specific Loss Power values up to 400 W/g (H0 = 30 kA/m; f = 700 kHz). Samples analysed for safety in human hepatocellular carcinoma (HepG2) cell line with up to 24h of exposure showed that these MNPs did not induce major genomic abnormalities such as micronuclei, nuclear buds, or nucleoplasmic bridges (MNIs, NBUDs, and NPBs), nor did they cause DNA double-strand breaks (DSBs) or aneugenic effects—types of damage considered most harmful to cellular genetic material. The present study is an essential step towards the use of these type of nanomaterials in any biomedical or clinical application.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Remote-controlled activation of the release through drug-loaded magnetic electrospun fibers

  • Ziegler, Richard
  • Ilyas, Shaista
  • Mathur, Sanjay
  • Goya, Gerardo F.
  • Fuentes-García, Jesús Antonio
The integration of magnetic nanoparticles within fibrillar structures represents an interesting avenue for the remotely controlled release of therapeutic agents. This work presents a novel drug release platform based on electrospun magnetic fibers (EMFs) combining drugs, magnetic nanoparticles (MNPs) and mesoporous silica nanoparticles (MSNs) for controlled drug delivery via alternating magnetic fields (AMF). The platform was demonstrated to be versatile and effective for hydrophilic ketorolac (KET) and hydrophobic curcumin (CUR) encapsulation and the major response observed for AMF-triggered release was reached using drug-loaded MSNs within the fibers, providing fine control over drug release patterns. The EMFs exhibited excellent inductive heating capabilities, showing a temperature increase of ∆T up to 8 °C within a 5 min AMF pulse. The system is shown to be promising for applications like transdermal pain management, oncological drug delivery, tissue engineering, and wound healing, enabling precise control over drug release in both spatial and temporal dimensions. The findings of this study offer valuable insights into the development of the next generation of smart drug delivery systems, based in multifunctional materials that can be remotely regulated and potentially revolutionize the field of nanomedicine.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Structure of ZnxFe3-xO4 nanoparticles studied by neutron diffraction and its relation with their response in magnetic hyperthermia experiments

  • Lohr, J.
  • Tobia, D.
  • Torres, T. E.
  • Rodríguez, L.
  • Puente Orench, I.
  • Cuello, G. J.
  • Aguirre, M. H.
  • Campo, J.
  • Aurelio, G.
  • Lima, E.
The mixed zinc-ferrite spinel magnetic nanoparticles (MNPs) with the general formula ZnxFe3−xO4 are among the most extensively studied families of Fe oxides due to their interesting and diverse chemical, electronic, and magnetic properties. These systems offer the possibility of surface functionalization and possess high biocompatibility, making them highly attractive for applications in biomedicine, such as magnetic fluid hyperthermia (MFH). The efficiency of the MFH process relies on the magnetic, structural and morphological properties of the MNPs. The substitution with the Zn ion and the cationic distribution, as well as the synthesis process employed, have a direct impact on the final properties of these oxides. Therefore, it is essential to have tools that enable a comprehensive characterization of the system to assess its performance in MFH. In this study, we have synthesized four ZnxFe3−xO4 MNP systems using three different methods: two by thermal decomposition at high temperatures, one by co-precipitation, and another by co-precipitation followed by ball milling. We analyze the effect of these various synthesis processes on the magnetic and crystallographic properties, aiming to correlate them with the response of each system in MFH. Neutron diffraction data are employed to determine the cation site occupation and to investigate the correlation with the synthesis method. MFH measurements were conducted in media of diverse viscosities, revealing different values of specific loss power, thus demonstrating a clear dependence on the synthesis process and Zn content.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Novel cisplatin-magnetoliposome complex shows enhanced antitumor activity via Hyperthermia

  • Jiménez-López, M. Carmen
  • Moreno-Maldonado, Ana Carolina
  • Martín-Morales, Natividad
  • O’Valle, Francisco
  • Ibarra, M. Ricardo
  • Goya, Gerardo F.
  • Molina, Ignacio J.
There are several methods to improve cancer patient survival rates by inducing hyperthermia in tumor tissues, which involves raising their temperature above 41 °C. These methods utilize different energy sources to deliver heat to the target region, including light, microwaves or radiofrequency electromagnetic fields. We have developed a new, magnetically responsive nanocarrier, consisting of liposomes loaded with magnetic nanoparticles and cis-diamminedichloroplatinum (II) (CDDP), commonly known as Cisplatin. The resulting magnetoliposome (ML) is rapidly internalized by lung and pancreas tumor cell lines, stored in intracellular vesicles, and capable of inducing hyperthermia under magnetic fields. The ML has no significant toxicity both in vitro and in vivo and, most importantly, enhances cell death by apoptosis after magnetic hyperthermia. Remarkably, mice bearing induced lung tumors, treated with CDDP-loaded nanocarriers and subjected to an applied electromagnetic field, showed an improved survival rate over those treated with either soluble CDDP or hyperthermia alone. Therefore, our approach of magnetic hyperthermia plus CDDP-ML significantly enhances in vitro cell death and in vivo survival of treated animals.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Vanadium incorporation in ferrite nanoparticles serves as an electron buffer and anisotropy tuner in catalytic and hyperthermia applications

  • Torres, T. E.
  • Valdés, D. P.
  • Hettler, S.
  • Nuñez, J. M.
  • Rodrigo, I.
  • Orue, I.
  • García, J. Á.
  • Plazaola, F.
  • Zysler, R. D.
  • Lima, E.
  • Aguirre, M. H.
  • Goya, G. F.
  • Arenal, R.
Cancer research has gradually shifted its focus from individual therapies to a combination of them for enhanced treatment effectiveness. In particular, the increased interest in the field of catalytic medicine through nanozymes proposes promising combinations with photothermal therapy, photodynamic therapy, and magnetic fluid hyperthermia (MFH). Nanozyme activity centers around the hydroxyl radical ˙OH, the most toxic of the reactive oxygen species (ROS). With a synergistic approach in mind, we studied VxFe3−xO4 magnetic nanoparticles (MNPs) as agents for ROS production and heating. These MNPs were exhaustively characterised both morphologically and magnetically. A compositional analysis through electron microscopy and spectroscopy unveils a core–shell structure with a V-rich shell. A study of the power absorption of these MNPs fixed into a gel matrix, emulating cytosol viscosity, provides values of up to 1000 W g−1 for samples with 0.5 wt% MNPs, an AC magnetic field amplitude of 65 mT and a frequency of 350 kHz, typical in the MFH application. A concentration of the ˙OH-adduct of up to 2300 nM has been measured through electron spin resonance analysis as a result of peroxidase-like activity. Through the comparison with similarly-sized ferrite MNPs, we determined that V incorporation lowers the magnetic anisotropy and serves as an electron buffer, explaining the enhanced MFH and ROS-production results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Maghemite and hematite nanowires synthesized by nanocasting: precursor effects on structural and magnetic properties

  • Cuello, Natalia I.
  • Fornasin, Emiliano G.
  • Oliva, Marcos I.
  • Goya, Gerardo F.
  • Marchetti, Gustavo
  • Eimer, Griselda A.
  • Elías, Verónica R.
Mesoporous iron oxides with tailored structural and magnetic properties were synthesized using the SBA-15 silica template and two different iron precursors: Fe(NO3)3·9H2O and Fe(C5H7O2)3, denoted as FeM-1 and FeM-2, respectively. The synthesis involved a two-step impregnation-calcination process followed by silica removal. Comprehensive characterization was performed using techniques such as nitrogen adsorption–desorption isotherms, TEM, SEM-EDX, XRD, XPS, and Mössbauer spectroscopy, as well as magnetic measurements. The results revealed significant differences in structural and magnetic properties between the two samples. FeM-1 exhibited higher structural order, greater homogeneity, and a single-phase α-Fe2O3 composition, whereas FeM-2 showed a bimodal pore size distribution and a dual-phase composition of α-Fe2O3 and ɣ-Fe2O3. Magnetic characterization indicated enhanced magnetization in FeM-2 due to the ferrimagnetic nature of ɣ-Fe2O3, while FeM-1 displayed lower magnetization consistent with the weak ferromagnetic behavior of α-Fe2O3. The combination of structural and magnetic analyses demonstrated the critical role of precursor selection in tuning the material properties for potential applications in catalysis and magnetic devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Phase Stability and Structural Evolution of Core/Shell Iron Oxide Nanoparticles Due to Oxidative Diffusion: Implications for Spintronic Applications

  • Nuñez, Jorge M.
  • Lima, Enio
  • Lohr, Javier Hernán
  • Vásquez Mansilla, Marcelo
  • Zysler, Roberto D.
  • Tolley, Alfredo
  • Bartolomé, Fernando
  • Rubín, Javier
  • Hettler, Simón
  • Arenal, Raúl
  • Aguirre, Myriam Haydee
  • Winkler, Elin L.
Core/shell iron oxide nanoparticles are promising candidates for spintronic applications due to their tunable magnetic properties and interfacial exchange interactions that allow the modulation of spin-polarized conduction. However, their performance depends critically on phase stability and structural integrity under fabrication and operating conditions involving thermal and oxidative diffusion. This study examines the transformation of iron oxide nanoparticles induced by oxidative diffusion in thermal annealing from wüstite to hematite through an intermediate (wüstite)-core/(magnetite–maghemite)-shell structure. The nanoparticles exhibit a rounded cubic morphology, with a distorted C2/m FeO phase at the core under compressive strain along (010), while the Fe3O4 shell exhibits tensile strain along (110). Oxygen diffusion occurs preferentially along [100] from the cube faces, influencing shape evolution. The system exhibits an exchange bias field of up to 3 kOe and enhanced magnetic hardening of up to 4 kOe, attributed to interfacial exchange interactions. Higher annealing temperature promotes the formation of γ-Fe2O3 with ordered vacancies. The exchange bias effect persists, even when the FeO core is smaller than 1 nm in size, indicating that the strain stabilizes the antiferromagnetic (AFM) order and enhances core/shell magnetic coupling. As oxidation proceeds, strain is gradually relaxed, and at 873 K, the oxidation to hematite is promoted, characterized by a Morin transition at 245 K. These findings reveal the intricate relationship between oxidation-driven structural evolution and magnetic behavior in engineered nanoparticle systems, underscoring the critical importance of material selection tailored to specific fabrication processes, operating conditions, and device performance requirements.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Designing a Photocatalyst: Relationship Between Surface Species and Specific Production of Desired ROS

  • Viale, Fabrizio E.
  • Elías, Verónica R.
  • Benzaquén, Tamara B.
  • Goya, Gerardo F.
  • Eimer, Griselda A.
  • Ferrero, Gabriel O.
Bimetallic mesoporous photocatalysts were synthesized via a wet impregnation method using SBA-15 as a support, and characterized by UV–visible diffuse reflectance spectroscopy, low-angle X-ray diffraction and N2 physisorption. Among the tested materials, the Ti/Mn combination exhibited the highest photocatalytic activity in azo dye degradation. To understand this enhanced performance, catalysts with varying Mn loads and calcination ramps were evaluated. Additionally, experiments with radical scavengers (isopropanol, chloroform) and under N2 insufflation were conducted to identify the active radical species. Catalysts prepared with low Mn content and higher calcination ramps showed the greatest activity, which significantly decreased with isopropanol, indicating hydroxyl radicals as the main reactive species. In contrast, samples with higher Mn content and quicker heating displayed reduced activity in the presence of chloroform, suggesting superoxide radical involvement. Spectroscopic analyses (XPS, UV–Vis DRS) revealed that increasing Mn load promotes the formation of Mn2+ over Mn4+ species and lowers the band gap energy. These findings highlight the direct correlation between synthesis parameters, surface composition and optical properties, providing a strategy for fine-tuning the performance of a photocatalyst.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Magnetically enhanced Fenton-like processes by nanofibers: real-time observation of tetracycline degradation in pig manure wastewater

  • Centro Elia, Berta
  • Morales Ovalle, Marco Antonio
  • Franco, Vanina G.
  • Fuentes García, Jesús Antonio
  • Goya, Gerardo F.
This work investigates the degradation of tetracycline (TC) in pig manure wastewater by a magnetically assisted heterogeneous Fenton-like process using MnFe2O4 magnetic nanoparticles (MNPs) embedded into polyacrylonitrile nanofibers (MNFs), resulting in flexible mats with high magnetic heating capacity (SLP approximate to 2.2 kW/g in air). TC degradation was monitored in real time by UV - Vis spectroscopy, showing that the MNF/H2O2 system could reduce the TC concentration from [TC](0)approximate to 6 mu g/mL to [TC]approximate to 50ng/mL after 40 & planckh;, corresponding to a >99&percnt removal. Control (blank) PAN fibres showed only a slow adsorption/degradation rate of approximate to 8ng/mL & sdot;& planckh;. The degradation kinetics displayed three regimes: an induction time (similar to 5 & planckh;), followed by accelerated degradation and late-time deactivation. A heterogeneous dynamic kinetic model (DKM) was used to describe the degradation mechanism, incorporating reactive oxygen species (ROS) generation, catalyst surface inactivation, and polymer stripping effects. The application of an alternating magnetic field (H-0=32kA/mf=450kHz) shortened the induction period from several hours to minutes, through the local heating of the MNFs (up to approximate to 51 degrees C). For a concentrated pig-manure filtrate ([TC](0)approximate to 0.32 mu g/mL), circulation through MNFs with H2O2 resulted in approximate to 50&percnt TC removal. We propose that the degradation process was driven by hydroxyl radical (center dot OH) formation through hydrogen peroxide (H2O2) activation on the MNPs surface. The magnetically triggerable Mn2FeO4@PAN nanofibers show that heterogeneous Fenton catalysis can be synergistically combined with localized magnetic heating to accelerate antibiotic degradation, offering a scalable, reusable and efficient alternative for antibiotic-contaminated wastewater with reduced iron sludge versus conventional homogeneous Fenton process..
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Safety of ferrite nanoparticles for biomedical applications: Cyto- and genotoxic effects of MxFe3-xO4 (M = Fe, Zn, Mn) in an Advanced 3D human hepatic in vitro model

  • Rozman, Iza
  • Gallo-Cordova, Alvaro
  • Puerto Morales, María del
  • Morales Ovalle, Marco A.
  • Goya, Gerardo F.
  • Kološa, Katja
  • Hocevar, Domen
  • Žegura, Bojana
  • Štern, Alja
Given the growing interest in nanosized spinel-type ferrite nanoparticles for biomedical applications and the limited information on their safety, this study aimed to assess their cellular and genotoxic effects in an in vitro 3D human hepatic cell model (HepG2 spheroids). Ferrite nanoparticles – γFe2O3 (FeNPs; 14 ± 4 nm), Zn0.7Fe2.3O4 (ZnNPs; 14 ± 5 nm), and Mn0.4Fe2.6O4 (MnNPs; 7 ± 2 nm) – were synthesised through a microwave-assisted polyol route, functionalized with citric acid, and characterised using Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES), Transmission Electron Microscopy (TEM), X-ray Diffraction (XRD), and Fourier Transform Infrared Spectroscopy (FTIR). Nanoparticle uptake was analysed using TEM, cytotoxicity was measured with CellTiter-Glo®, and oxidative stress induction was assessed using the 2′,7′-Dichlorodihydrofluorescein diacetate (DCFH-DA) and malondialdehyde (MDA) assay. Genotoxic effects were evaluated using the comet, γH2AX and p-H3 assays. Cellular stress responses were assessed using toxicogenomic analysis. Significant cytotoxicity of the tested nanoparticles (0.1–250 µg/mL) was observed; however, TEM analysis revealed limited penetration to the outermost cell layers of spheroids. Notably, only FeNPs induced ROS generation, while MDA levels remained unchanged in all tested samples. Low DNA damage was detected at 24 h, but a significant increase was observed at 96 h (5–50 µg/mL). No increase in γH2AX or p-H3 was found. No substantial alterations in DNA damage or oxidative stress-response gene expression were detected. Altogether, our findings suggest that the effects of ferrite nanoparticles are time- and composition-dependent, underlining the importance of further mechanistic and chronic exposure evaluations in 3D cell models.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Defining the sonochemical threshold for phase-pure Fe3O4 nanoparticle synthesis

  • Morales Ovalle, Marco A.
  • Lima Jr., Enio
  • Goya, Gerardo F.
This study systematically examines the sonochemical synthesis of Fe3O4 nanoparticles as a function of precursor concentration, alkalinity, reagent-addition mode, and effective irradiation time. The central result is that complete Fe(OH)2 conversion into Fe3O4 during sonication determines phase purity and reproducibility. When this threshold is not reached, residual precursor continues to transform during post-synthesis handling, so washing acts not as a passive purification step but as a secondary conversion stage in incompletely converted systems. For phase-pure samples obtained after complete sonochemical conversion, faceted Fe3O4 nanoparticles with tunable sizes from 18(6) to 60(20) nm were reproducibly obtained. In these samples, SLP follows the expected size dependence under fixed AMF conditions. In contrast, for incomplete sonochemical conversion systems, the evolving Fe3O4 fraction makes SLP normalization unstable, and the absorbed power normalized by total iron (SPI) provides a more robust metric. Across these dynamic systems, SPI correlates with XRD microstrain, indicating that structurally defective secondary magnetite formed during post-irradiation conversion correlates to heating efficiency. These results define the process window required for reproducible sonochemical Fe3O4 synthesis and clarify how incomplete precursor conversion biases both structural and hyperthermia analyses.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Glucose coated FeO@Fe3O4 nanoparticles show tunable catalytic reactivity and safety in a 3D hepatic in vitro model

  • Morales Ovalle, Marco A.
  • Rozman, Iza
  • Winkler, Elin L.
  • Lima, Enio
  • Štern, Alja
  • Kološa, Katja
  • Žegura, Bojana
  • Goya, Gerardo F.
Iron-oxide magnetic nanoparticles (MNPs) have been extensively investigated as magnetically actuated nanocatalysts for diagnostic and therapeutic applications. However, because wüstite/ magnetite/maghemite phases can interconvert, coexisting Fe2+/Fe3+ species may redirect Fentonlike chemistry and generate reactive oxygen species (ROS) profiles that differ from the intended biocatalytic pathway. Here, we investigate monodisperse biphasic FeO@Fe3O4 core-shell MNPs with an average particle size ⟨d⟩ = 9.6(5) nm, and their glucose-coated analogue, combining EPR radical analysis with toxicity testing in a 3D HepG2 hepatic spheroid model. Naked particles exhibited conventional Fenton-like behavior dominated by hydroxyl radicals (⋅OH), whereas glucose coating markedly suppressed ⋅OH while increasing hydroperoxyl radicals (⋅OOH; ≈55 pM at 60 min), demonstrating ligand-controlled rerouting of the radical pathway. TEM mapping across spheroid cross-sections showed preferential MNP accumulation in the outer layer, with most observed events confined to the outer ≈10–15 μm, corresponding to an approximately one-cell-thick rim; sparse deeper events were observed up to ≈30–35 μm. MNPs produced dose- and time-dependent cytotoxicity in HepG2 spheroids, with IC50 values of 29.3 (24 h) and 10.8 (96 h) µg·cm−2, without evidence of lipid peroxidation or genotoxicity. MDA levels remained unchanged, the comet assay showed no increase in DNA damage, and γH2AX and phospho-H3 (p-H3) positive events were not detected. Our results show that glucose functionalization provides a simple route to modulate radical pathways and define operational windows for redox-active FeO@Fe3O4 nano-reactors in oxidative nanomedicine.