Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 57
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Probing topological protection in 2D-metal-organic frameworks

  • Hernández-López, Leyre
  • Piquero-Zulaica, Ignacio
  • Downing, Charles A.
  • Piantek, Marten
  • Fujii, Jun
  • Serrate, David
  • Ortega, J. Enrique
  • Bartolomé, Fernando
  • Lobo-Checa, Jorge
Trabajo presentado al International Workshop on Spintronics, celebrado en San Carlos de Bariloche, Río Negro (Argentina) del 6 al 11 de noviembre de 2022., Topological insulators are a recently discovered class of materials exhibiting interesting properties for applications such as quantum computation devices. Recently, metal-organic frameworks (MOF) have been theoretically proposed as the organic counterpart of topological insulators. Despite the experimental achievement of several of the proposed MOFs, their edge state visualization, which is the fingerprint of 2D topological insulator, remains elusive. We have formed these proposed MOFs with expected topological insulator character using 9,10-dicyanoanthracene molecules and Cu, Fe and Co adatoms on a the three (111) noble metal substrates. The lattices generally extend throughout the surface as single-domain and exhibit an almost perfect order. By means of scanning tunneling spectroscopy and angle-resolved photoemission spectroscopy we studied their electronic structure, and commonly find total absence of an edge state despite the excellent network order. Functionalized tip measurements and tight-binding calculations suggest that structural asymmetries drive the networks into a topologically trivial case that destroys its edge state. However, we observe an edge state emerging when the SOC of the coordination atom is significantly increased. Thus, we present the first experimental evidence compatible with the Organic Topological Insulator prediction., PID2019-107338RB-C64, RED2018-102833-T, financiado porMCIN/AEI /10.13039/501100011033 Regional Government of Aragon (E12-20R). European Research Council under European Union’s Horizon 2020 research and innovation programme of Marie Skłodowska-Curie grant agreementULTIMATE-I Nº 101007825 Access to STM instruments: LMA-University of Zaragoza, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antisite Defects and Chemical Expansion in Low-damping, High-magnetization Yttrium Iron Garnet Films

  • Santiso, José
  • García Izquierdo, Carlos
  • Romanque, Cristian
  • Henry, Loïc
  • Bernier, Nicolas
  • Bagués, Núria
  • Caicedo, José Manuel
  • Valvidares, Manuel
  • Sandiumenge, Felip
Yttrium iron garnet is widely investigated for its suitability in applications ranging from magneto-optical and microwave devices to magnonics. However, in the few-nanometer thickness range, epitaxial films exhibit a strong variability in magnetic behavior that hinders their implementation in technological devices. Here, direct visualization and spectroscopy of the atomic structure of a nominally stoichiometric thin film, exhibiting a small damping factor of 3.0 ⋅ 10−4, reveals the occurrence of Y-excess octahedral antisite defects. The two-magnon strength is very small, Γ0≈10−6 Oe, indicating a very low occurrence of scattering centers. Notably, the saturation magnetization, 4πMs=2.10 (±0.01) kOe, is higher than the bulk value, in consistency with the suppression of magnetic moment in the minority octahedral sublattice by the observed antisite defects. Analysis of elemental concentration profiles across the substrate-film interface suggests that the Y-excess is originated from unbalanced cationic interdiffusion during the early growth stages., We thank Audrey Jannaud for FIB preparation of the TEM lamellae. We thank Prof. Dave McComb for discussions and access to Ohio Supercomputer Center. Part of this work was carried out through the access to HRTEM and XAS/XMCD facilities granted by the NFFA-Europe Infrastructure (proposals ID 678 and ID 571) under Horizon 2020 EU Funding Program. This work was supported in part by the Spanish Ministry of Economy, Industry and Competitiveness (project PID2019-108573GB-C21), and by the Catalan AGAUR agency (project: 2017-SGR-579). ICN2 is funded by the CERCA programme/Generalitat de Catalunya and by the Severo Ochoa programme (SEV-2017-0706). ICMAB-CSIC is funded by the Severo Ochoa programme (CEX2019-000917-S). CG and JS acknowledge funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 101007825 (ULTIMATE-I Project). MV acknowledges funding by PID2020-116181RB-C32/MCIN/AEI/10.13039/501100011033. C. G. and C. R. acknowledge the financial support received by ANID FONDECYT/REGULAR 1201102. This work was also supported by grant ANID PIA/APOYO AFB180002. F. S. acknowledges the Spanish Ministry of Industry, Economy and Competitiveness (project no. RTI2018-098537-B-C21)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Annealing effects on the magnetic and magnetotransport properties of iron oxide nanoparticles self-assemblies

  • Fabris, Fernando
  • Lima Jr., Enio
  • Martín Nuñez, Jorge
  • Troiani, Horacio E.
  • Aguirre, Myriam H.
  • Leborán, Victor
  • Rivadulla, Francisco
  • Winkler, Elin L.
In magnetic tunnel junctions based on iron oxide nanoparticles the disorder and the oxidation state of the surface spin as well as the nanoparticles functionalization play a crucial role in the magnetotransport properties. In this work, we report a systematic study of the effects of vacuum annealing on the structural, magnetic and transport properties of self-assembled ∼10 nm Fe3O4nanoparticles. The high temperature treatment (from 573 to 873 K) decomposes the organic coating into amorphous carbon, reducing the electrical resistivity of the assemblies by 4 orders of magnitude. At the same time, the 3.Fe2+/(Fe3++Fe2+) ratio is reduced from 1.11 to 0.13 when the annealing temperature of the sample increases from 573 to 873 K, indicating an important surface oxidation. Although the 2 nm physical gap remains unchanged with the thermal treatment, a monotonous decrease of tunnel barrier width was obtained from the electron transport measurements when the annealing temperature increases, indicating an increment in the number of defects and hot-spots in the gap between the nanoparticles. This is reflected in the reduction of the spin dependent tunneling, which reduces the interparticle magnetoresistance. This work shows new insights about influence of the nanoparticle interfacial composition, as well their the spatial arrangement, on the tunnel transport of self-assemblies, and evidence the importance of optimizing the nanostructure fabrication for increasing the tunneling current without degrading the spin polarized current., The authors are thankful to Argentine government agency Agencia Nacional de Promoción Científica y Tecnológica (ANPCyT) for the financial support of the work through Grant No. PICT-2019-02059, and Universidad Nacional de Cuyo (UNCuyo) for support through Grants No. 06/C029-T1. F Fabris acknowledges the São Paulo Research Foundation (FAPESP) for the post-doctoral fellowship with Grant No. 2019/13678-1. The authors also gratefully acknowledge the European Commission for the financial support under the H2020-MSCA-RISE-2016, SPICOLOST project N° 734187 and H2020-MSCA-RISE-2021 ULTIMATE-I project N° 101007825. FR acknowledges financial support of the Ministerio de Economía y Competitividad of Spain (Project No. MAT2016-80762-R), and Xunta de Galicia (Centro Singular de Investigación de Galicia accreditation 2016–2019) and the European Union (European Regional Development Fund—ERDF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficient generation of highly crystalline carbon quantum dots via electrooxidation of ethanol for rapid photodegradation of organic dyes

  • Barrionuevo, Santiago D.
  • Fioravanti, Federico
  • Nuñez, Jorge M.
  • Llaver, Mauricio
  • Aguirre, Myriam H.
  • Bellino, Martin G.
  • Lacconi, Gabriela I.
  • Ibañez, Francisco J.
This article is part of the themed collection: #MyFirstJMCC, Achieving versatile routes to generate crystalline carbon-based nanostructures has become a fervent pursuit in photocatalysis-related fields. We demonstrate that the direct electrooxidation of ethanol, performed on Ni foam, yields ultra-small and highly crystalline graphene-like structures named carbon quantum dots (CQDs). We perform simulations of various sp2 and sp3 domains in order to understand the optical properties of CQDs by accounting their contribution as absorbance/luminescent centers in the overall optical response. Experiments and simulations reveal that absorbance bands for as-synthesized CQDs are dominated by small sp2 domains comprised of ≤7 aromatic-rings. After 48 h synthesis, the dispersion transition from yellow to red, exhibiting new and red shifted absorbance bands. Furthermore, fluorescence emission is governed by medium-sized sp2 domains (with aromatic ring counts ≤12) and oxygen-containing groups. These oxygen-rich groups within the CQDs, confirmed by FT-IR and XPS, are responsible for the fast photodegradation of organic dyes, with ∼90% of methylene blue (MB) being degraded within the first 5 min of light exposure. Our work provides crucial insights about the electrochemical synthesis and overall optical properties of carbon nanostructures, while being effective and reliable toward the degradation of contaminants in water., We gratefully acknowledge financial support from PICT (2019–2188) and Proyecto de Incentivos 2019-X-887 from UNLP. SB and FF acknowledge CONICET for their doctoral scholarships. We also acknowledge the financial support of European Commission through Marie Skłodowska-Curie Actions H2020 RISE with the projects MELON (grant no. 872631) and ULTIMATE-I (grant no. 101007825). Authors would like to acknowledge the access of equipment of “Servicio General de Apoyo a la Investigación (SAI), Universidad de Zaragoza” and LAMARX-SNM at Universidad Nacional de Córdoba (UNC), Argentina., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel Ir1–xCoxO2 thin films: Growth and characterization

  • Laguna-Marco, M. A.
  • Herrero-Albillos, Julia
  • Aguirre, Myriam H.
  • Rueda-Jiménez, Marcos
  • Mikulska, Iuliia
Ir1–xCoxO2 thin films have been prepared by reactive co–sputtering deposition at room temperature. Composition, structure, electronic properties and electric and magnetic behavior have been analyzed by different techniques including XRR, XRD, TEM microscopy, SQUID magnetometry, electrical resistivity and XAS spectroscopy. After annealing, an Ir1–xCoxO2 substitutional solid solution phase with rutile crystal structure was achieved for a wide Co-doping range 0 ≤ x ≤ 0.6. Starkly departing from the highly insulating behavior of CoO and Co3O4, the electrical resistivity at room temperature of our films is only slightly higher than that of IrO2. Likewise, our work shows that the magnetic response of the doped films is very similar to that of the paramagnetic parent IrO2. Neither ferromagnetism nor enhanced paramagnetism is observed. XAS spectra indicate a Co3+ oxidation state and, correspondingly, an oxidation state of ∼5+ for Ir ions in the polycrystalline Ir0.6Co0.4O2 film. By application of sum rules, a 13 % increase in the spin–orbit coupling is found despite the lattice shrinkage causes a detrimental bandwidth broadening., This work was supported by Project PID2020-115159GB-I00 funded by Spanish MCIN/AEI/10.13039/501100011033 and by the Regional Government of Aragon (Grant No. E12-23R RASMIA). We acknowledge Diamond Light Source for time on B18 under Proposal SP-32410. The research leading to this result has been supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. The authors also gratefully acknowledge the European Commission for the financial support under the H2020-MSCA-RISE-2020 MELON project Nº 872631 and H2020-MSCA-RISE-2021 ULTIMATE-I project Nº 101007825., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data for Novel Ir1–xCoxO2 thin films: growth and characterization

  • Laguna-Marco, M. A.
  • Herrero-Albillos, Julia
  • Aguirre, Myriam H.
  • Rueda-Jiménez, Marcos
  • Mikulska, Iuliia
  • Proyecto: PID2020-115159GB-I00
[Ir1–xCoxO2 thin films were prepared by reactive magnetron co–sputtering deposition on Si substrates at room temperature (RT) from metallic Ir and Co targets. Crystal structures were characterized by powder X-ray diffraction (XRD) at room temperature in a Rigaku D-Max system using Cu Kalpha wavelength. The resistivity measurements were carried out in a PPMS-9T. The magnetic measurements were carried out in a SQUID magnetometer MPMS–XL (both from Quantum Design). Transmission electron microscopy images, HRTEM (High resolution transmission electron microscopy) and STEM-HAADF (scanning TEM with high angular annular dark field detector), were performed by Tecnai F30 and Titan G2 80-300 keV (with aberration corrected probe), respectively, operated at 300 keV. The compositional analysis profile was performed by energy dispersive spectroscopy (EDS) in an Oxford Aztec equipment in situ STEM-HAADF analysis. The lamellae for TEM analysis were prepared by focused ion beam in a commertial Helios 650 N dual beam equipment. X–ray absorption spectroscopy (XAS) measurements were carried out at the B18 beamline of the Diamond Light Source. Co K-edge and Ir L2,3-edge XAS spectra of the films were measured in fluorescence mode using Quick-EXAFS technique. A Si (111) double crystal monochromator was used to select the incident X-ray energy. Co K-edge (Ir L3-edge) measurements have been performed using collimating mirror with Pt (Cr) coating. The fluorescence measurements have been performed using Canberra 36-pixel Monolithic Segmented Hyper Pure Germanium Detector with the STFC Xspress4 Digital Pulse Processor.], Spanish MICINN Project No. PID2020-115159GBI00/AEI/10.13039/501100011033; Regional Government of Aragon (Grant No. E12-23R RASMIA); European Commission under the H2020-MSCA-RISE-2020 MELON project Nº 872631 and H2020-MSCA-RISE-2021 ULTIMATE-I project Nº 101007825., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sol-gel synthesis and multiferroic properties of pyrochlore-free Pb(Fe0.5Nb0.5)O3 thin films

  • Imhoff, L.
  • Di Marco, M. B.
  • Barolin, S. A.
  • Rengifo, Miguel
  • Aguirre, Myriam H.
  • Stachiotti, Marcelo G.
Lead iron niobate (PbFe0.5Nb0.5O3 – PFN) thin films were synthesized by a modified sol-gel route, which offers the advantage of a rapid, simple and non-toxic reaction method. Polycrystalline perovskite-structured PFN thin films without pyrochlore phases were obtained on Pt/Ti/SiO2/Si substrates after sintering by rapid thermal annealing at 650 °C. TEM and AFM images confirmed the excellent quality of the sintered film, while EDS spectroscopy revealed the presence of oxygen vacancies near the film/substrate interface. Electric measurements show good dielectric properties and ferroelectric behavior, characterized by typical C–V curves and well-defined P-E ferroelectric loops at 1 kHz, with remanent polarization values of ∼12 μC/cm2. The polarization, however, increases with decreasing frequency, indicating the presence of leakage currents. I–V measurements show a significant increase in DC-conduction at relatively low fields (around 100 kV/cm). The films display ferromagnetic behavior at room temperature, with magnetic remanence around 30 emu/cm3 and a coercive field of 1 kOe. These values are significantly higher than those obtained for PFN powders fabricated by the same sol-gel route, as well as the magnetization values reported in the literature for epitaxial films., This work was supported by Consejo Nacional de Investigaciones Científicas y Técnicas de la República Argentina (CONICET) by PIP Nº 0374. M.G.S. thanks support from Consejo de Investigaciones de la Universidad Nacional de Rosario (CIUNR). We acknowledge the financial support of the European Commission by the H2020-MSCA RISE projects MELON (Grant Nº 872631) and ULTIMATE-I (Grant Nº 101007825)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stacking-configuration-preserved graphene quantum dots electrochemically obtained from CVD graphene

  • Barrionuevo, Santiago D.
  • Fioravanti, Federico
  • Nuñez, Jorge M.
  • Muñeton Arboleda, David
  • Lacconi, Gabriela I.
  • Bellino, Martin G.
  • Aguirre, Myriam H.
  • Ibañez, Francisco J.
The layer stacking morphology in nanocarbons is paramount for achieving new properties and outperforming applications. Here, we demonstrate that graphene quantum dots (GQDs) retain crystallinity and a stacking structure from CVD graphene grown on Ni foam. Our results reveal that GQD subdomains comprise a few-layer graphene structure in the AB···AB and ABC···ABC stacking configuration. HR-TEM images along with a multiple-approach characterization (XRD, XPS, UV–vis, AFM, and ATR-IR) exhibit ∼3.0 to ∼8.0 nm crystalline GQDs with 2–6 graphene layers thick indicating a disk-shape structure. The UV–vis profiles show changes in color of the dispersion (from colorless to red) during and after the electrochemistry, suggesting a systematic electrooxidation of graphene into smaller, highly crystalline, and more complex sp2/sp3 structures. Importantly, a control experiment performed under the same conditions but with a graphitic rod exhibited large, polydisperse, and multilayer carbon structures. This work demonstrates a relatively easy electrochemical synthesis to obtain GQDs which retain the pristine and, in turn, distinctive structure of graphene grown on Ni foam., We gratefully acknowledge financial support from PICT (2019-2188), PIP-2022-2024 0001 (CONICET), and Proyecto de Incentivos 2019-X-887 from UNLP. We also acknowledge the financial support of the European Commission through Marie Skłodowska-Curie Actions H2020 RISE with the projects MELON (Grant No. 872631) and ULTIMATE-I (Grant No. 101007825). The authors would like to acknowledge the access to the equipment of “Servicio General de Apoyo a la Investigación (SAI), Universidad de Zaragoza”. F.J.I. acknowledges Dr. Mauricio Llaver for the discussion on FT-IR spectrum of GQDs. S.D.B. and F.F. acknowledge CONICET for their doctoral scholarships., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Discarding metal incorporation in pyrazole macrocycles and the role of the substrate on single-layer assemblies

  • Lobo-Checa, Jorge
  • Rodríguez, Sindy Julieth
  • Hernández-López, Leyre
  • Herrer, Lucía
  • Passeggi Jr., Mario C. G.
  • Cea, Pilar
  • Serrano, José Luis
Pyrazole derivatives are key in crystal engineering and liquid crystal fields and thrive in agriculture, pharmaceutical, or biomedicine industries. Such versatility relies in their supramolecular bond adaptability when forming hydrogen bonds or metal-pyrazole complexes. Interestingly, the precise structure of pyrazole-based macrocycles forming widespread porous structures is still unsolved. We bring insight into such fundamental question by studying the self-assembled structures of a bis-pyrazole derivative sublimed in ultra-high-vacuum conditions (without solvents) onto the three (111) noble metal surfaces. By means of high-resolution scanning tunneling microscopy that is validated by gas phase density functional theory calculations, we find a common hexagonal nanoporous network condensed by triple hydrogen bonds at the molecule–metal interface. Such assembly is disrupted and divergent after annealing: (i) on copper, the molecular integrity is compromised leading to structural chaos, (ii) on silver, an incommensurate new oblique structure requiring molecular deprotonation is found and, (iii) on gold, metal–organic complexes are promoted yielding irregular chain structures. Our findings confirm the critical role of these metals on the different pyrazole nanoporous structure formation, discarding their preference for metal incorporation into the connecting nodes whenever there is no solvent involved., We gratefully acknowledge financial support from the Spanish Ministries of Economy, Industry and Competitiveness (MINECO, grants MAT2016-78293-C6-4-R and MAT2016-78293-C6-6) and of Science and Innovation (MICINN, grant PID2019-107338RBC64, PID2019-105881RB-I00, PID2021-122882NB-I00, PID2022-141433OB-I00 and PID2022_138750NB-C21/AEI/10.13039/501100011033 and RED2018-102833-T) including the Spanish Research Agency (AEI) and the European Regional Development Fund (ERDF), from the regional Governments of Aragon (E12_23R, E47_23R and E31_23R) and from the European Commission through the project ULTIMATE-I, grant ID 101007825. The present work used computational resources of the Pirayu cluster, acquired with funds from the Santa Fe Science, Technology and Innovation Agency (ASACTEI), Government of the Province of Santa Fe, through Project AC-00010-18, resolution no. 117/14., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic transition and spin-polarized two-dimensional electron gas controlled by polarization switching in strained CaMnO3/BaTiO3 slabs

  • Di Napoli, Solange
  • Román, Augusto
  • Llois, A. M.
  • Aguirre, Myriam H.
  • Steren, Laura B.
  • Barral, M. A.
𝐴⁢𝑏𝑖⁢𝑛⁢𝑖⁢𝑡⁢𝑖⁢𝑜 calculations show the presence of a strong magnetoelectric interfacial coupling in a CaMnO3 ultrathin film grown on a strained BaTiO3 ferroelectric film. This heterostructure presents a polarization driven magnetic transition from a G-type to an A-type antiferromagnetic structure. Together with this magnetic transition we find a metallic behavior at the interface between these two insulators, where the charge character of the carriers can be tuned from electrons to holes by switching the electric polarization direction of the ferroelectric film. Besides, the electron gas is spin polarized while the hole gas is not., This work was partially supported by PICT-2016-0867 and PICT-2019-2128 of the ANPCyT, Argentina, and by H2020-MSCA-RISE-2016 SPICOLOST Project No. 734187. We also acknowledge the financial support of European Commission through Marie Skłodowska-Curie Actions H2020 RISE with the projects MELON (Grant No. 872631) and ULTIMATE-I (Grant No. 101007825). Authors would like to acknowledge the access of equipment of “Servicio General de Apoyo a la Investigación (SAI), Universidad de Zaragoza.”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effects of silver nanoparticle doping on electrical, optical, and photovoltaic properties of PbZrxTi1−xO3 thin films synthesized by sol–gel

  • Di Marco, M. B.
  • Imhoff, L.
  • Roldán, M. V.
  • Santiago, M. L.
  • Aguirre, Myriam H.
  • Pellegri, Nora S.
  • Stachiotti, Marcelo G.
The effects produced by the incorporation of silver nanoparticles (Ag-NPs) of an average size of ∼4 nm on the electrical, optical, and photovoltaic properties of PbZr0.52Ti0.48O3 (PZT) thin films are investigated. The films were synthesized by a chemical solution deposition process, and two different distributions of nanoparticles in the PZT matrix were tested: (1) alternated Ag-NPs and PZT layers, and (2) distributed Ag-NPs over the entire film volume. The resulting films, with thicknesses between 200 and 270 nm, display no segregation of secondary phases, and good dielectric and ferroelectric properties. An increase in remnant polarization is observed when the Ag-NPs are distributed over the volume, which is ascribed to the modification of the film texture. The incorporation of Ag-NPs into the PZT matrix produces an enhancement of the photocurrent density under UV illumination of ∼30%., This work was supported by Consejo Nacional de Investigaciones Científicas y Técnicas de la República Argentina (CONICET) by PIP No 0374 and No 0479. We acknowledge the financial support of the European Commission by the H2020-MSCA RISE projects MELON (Grant No 872631) and ULTIMATE-I (Grant No 101007825). M.G.S. thanks support from Consejo de Investigaciones de la Universidad Nacional de Rosario (CIUNR). The authors would like to acknowledge the access of equipment of “Servicio General de Apoyo a la Investigación (SAI), Universidad de Zaragoza”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fluorescent graphene quantum dots-enhanced machine learning for the accurate detection and quantification of Hg2+ and Fe3+ in real water samples

  • Llaver, Mauricio
  • Barrionuevo, Santiago D.
  • Nuñez, Jorge M.
  • Chapana, Agostina L.
  • Wuilloud, Rodolfo G.
  • Aguirre, Myriam H.
  • Ibañez, Francisco J.
Selective, accurate, fast detection with minimal usage of instrumentation has become paramount nowadays in the areas of environmental monitoring. Herein, we chemically modified fluorescent graphene quantum dots (GQDs) and trained a machine learning (ML) algorithm for the selective quantification of Hg2+ and Fe3+ ions present in real water samples. The probe is obtained via the electrosynthesis of CVD graphene in the presence of urea, followed by functionalization with 1-nitroso-2-naphthol (NN). The functionalization with NN moieties dramatically improves the selectivity and sensitivity of the probe toward Hg2+ and Fe3+, as demonstrated by LODs of 0.001 and 0.003 mg L−1, respectively. Simulations performed by time-dependent density functional theory (TD-DFT) reveals that the NN molecules within the GQDs are responsible for the florescence emission of the probe. The emission spectra profiles exhibited distinct characteristics between Hg2+ and Fe3+, enabling the ML model to precisely quantify and differentiate between both analytes present in natural and drinking waters. The ML results were further validated by measurements via cold vapor-atomic fluorescence spectroscopy and UV–vis spectroscopy. Our work demonstrates how chemical modification of GQDs, guided by an efficient ML model, markedly enhances sensitivity and selectivity in detecting harmful ions while critically reducing experiments and instrument handling., This research was funded by Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET) (PIP-2022-2024-0001), Agencia Nacional de Promoción Científica y Tecnológica (FONCYT) (Projects PICT-2019-03859-BID, PICT-2019-2188-BID) and Universidad Nacional de Cuyo (Project 06/M035-T1) and UNLP (Project X-887) (Argentina). We acknowledge Federico Fioravanti and Dr. Gabriela I. Lacconi, from the Instituto de Investigaciones en Fisicoquimica de Córdoba (INFIQC, CONICET/UNC), for their help obtaining and analyzing the XPS spectra. We also acknowledge the financial support of European Commission with the action H2020 RISE projects MELON (Grant No. 872631) and ULTIMATE-I (Grant No. 101007825). Authors would like to acknowledge the use of “Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improving the two-color temperature sensing using machine learning approach: GdVO4:Sm3+ prepared by Solution Combustion Synthesis (SCS)

  • Jelic, Jovana Z.
  • Dencevski, Aleksa
  • Rabasovic, Mihailo D.
  • Krizan, Janez
  • Savic-Sevic, Svetlana
  • Nikolic, Marko G.
  • Aguirre, Myriam H.
  • Sevic, Dragutin
  • Rabasovic, Maja S.
This article belongs to the Special Issue Editorial Board Members’ Collection Series: Photonics Sensors., The gadolinium vanadate doped with samarium (GdVO4:Sm3+) nanopowder was prepared by the solution combustion synthesis (SCS) method. After synthesis, in order to achieve full crystallinity, the material was annealed in air atmosphere at 900 °C. Phase identification in the post-annealed powder samples was performed by X-ray diffraction, and morphology was investigated by high-resolution scanning electron microscope (SEM) and transmission electron microscope (TEM). Photoluminescence characterization of emission spectrum and time resolved analysis was performed using tunable laser optical parametric oscillator excitation and streak camera. In addition to samarium emission bands, a weak broad luminescence emission band of host VO43− was also observed by the detection system. In our earlier work, we analyzed the possibility of using the host luminescence for two-color temperature sensing, improving the method by introducing the temporal dependence in line intensity ratio measurements. Here, we showed that further improvements are possible by using the machine learning approach. To facilitate the initial data assessment, we incorporated Principal Component Analysis (PCA), t-Distributed Stochastic Neighbor Embedding (t-SNE) and Uniform Manifold Approximation and Projection (UMAP) clustering of GdVO4:Sm3+ spectra at various temperatures. Good predictions of temperature were obtained using deep neural networks. Performance of the deep learning network was enhanced by data augmentation technique., This work was financially supported by funding provided by the Institute of Physics Belgrade, through the grant by the Ministry of Science, Technological Development and Innovations of the Republic of Serbia and by European Commission through Marie Skłodowska-Curie Actions H2020 RISE with ULTIMATE-I (Grant No. 101007825). Authors would like to acknowledge the access of equipment of “Servicio General de Apoyo a la Investigación (SAI), Univesidad de Zaragoza”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Intrinsic and extrinsic relaxation mechanisms for controlling spin current intensity in Fe100−xCox/Ta bilayers

  • Velázquez Rodriguez, Daniel
  • Gómez, J. E.
  • Avilés-Félix, Luis
  • Ampuero Torres, J. L.
  • Torres, Teobaldo E.
  • Pérez Martínez, A. A.
  • Morbidel, Leonardo
  • Goijman, D.
  • RojasSánchez, J. C.
  • Aguirre, Myriam H.
  • Milano, Julián
  • Butera, Alejandro
Controlling the damping parameter in metallic ferromagnetic thin films is a key step for spintronic applications in which spin currents are generated by spin pumping. The coexistence of two states with low and high damping constant values would allow to obtain states of high and low spin current intensity, respectively. We have fabricated Fe100−xCox/Ta (with nominal x =0, 15, 20, 25, 30 and 35) bilayers in which the Fe100−xCox layers grow epitaxially and the Ta layer is polycrystalline. We have found the coexistence of Gilbert damping and two magnon scattering mechanisms linked to a sign change in the magnetocrystalline anisotropy constant that allows the manipulation of low and high intensity states of the measured inverse spin Hall effect voltage. Bilayers with lower Co concentrations (x ⩽ 25%) present different relaxation mechanisms (isotropic Gilbert damping and two magnon scattering) and an extra ferromagnetic resonance linewidth broadening produced due to mosaicity. Bilayers with Co concentration x > 25% present a dominating Gilbert damping for all directions in the film plane. However, in this concentration range the damping constant is anisotropic and when the magnetic field is applied along the hard magnetization direction α increases ∼420% with respect to the value obtained for the easy magnetization direction. Coexistence of isotropic Gilbert damping and two magnon scattering generated spin currents 2.5 times larger when the field is applied along the hard magnetization axis compared to the value observed in the easy magnetization axis. These f indings make the Fe100−xCox/Ta system an excellent candidate for spintronic device applications., L M is with the Laboratorio de Investigaci'ón Aplicada en Telecomunicaciones-LIAT (DIT, GDTyPE, GAIyANN, CNEA). This work was partially supported by Conicet under Grant PIBAA 2022–2023 Project MAGNETS Grant ID. 28720210100099CO; ANPCyT Grant PICT-2018-01138, ANPCyT Grant PICT 2021-00113 (Project DISCO) and U N Cuyo Grant 06/C556 from Argentina. We acknowledge the financial support of European Commission by the H2020-MSCA RISE Project ULTIMATE-I (Grant No. 101007825). Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigaci'ón-SAI, Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure of ZnxFe3−xO4 nanoparticles studied by neutron diffraction and its relation with their response in magnetic hyperthermia experiments

  • Lohr, Javier
  • Tobia, Dina
  • Torres, Teobaldo E.
  • Rodríguez, Luis M.
  • Puente-Orench, Inés
  • Cuello, Gabriel J.
  • Aguirre, Myriam H.
  • Campo, Javier
  • Aurelio, Gabriela
  • Lima Jr., Enio
The mixed zinc-ferrite spinel magnetic nanoparticles (MNPs) with the general formula ZnxFe3−xO4 are among the most extensively studied families of Fe oxides due to their interesting and diverse chemical, electronic, and magnetic properties. These systems offer the possibility of surface functionalization and possess high biocompatibility, making them highly attractive for applications in biomedicine, such as magnetic fluid hyperthermia (MFH). The efficiency of the MFH process relies on the magnetic, structural and morphological properties of the MNPs. The substitution with the Zn ion and the cationic distribution, as well as the synthesis process employed, have a direct impact on the final properties of these oxides. Therefore, it is essential to have tools that enable a comprehensive characterization of the system to assess its performance in MFH. In this study, we have synthesized four ZnxFe3−xO4 MNP systems using three different methods: two by thermal decomposition at high temperatures, one by co-precipitation, and another by co-precipitation followed by ball milling. We analyze the effect of these various synthesis processes on the magnetic and crystallographic properties, aiming to correlate them with the response of each system in MFH. Neutron diffraction data are employed to determine the cation site occupation and to investigate the correlation with the synthesis method. MFH measurements were conducted in media of diverse viscosities, revealing different values of specific loss power, thus demonstrating a clear dependence on the synthesis process and Zn content., We acknowledge financial support of the European Commission through Marie Skłodowska-Curie Actions H2020 RISE with the projects NESTOR (Grant No. 101007629), SPICOLOST (Grant No. 734187), and ULTIMATE-I (Grant No. 101007825). Also, J.L. and D.T. acknowledge support of ANPCyT though Project No. PICT-2019-01849., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Epitaxial Growth of Ni-Mn-Ga on Al2O3(112¯0) Single-Crystal Substrates by Pulsed Laser Deposition

  • Pinedo-Cuba, Manuel G.
  • Caicedo, José Manuel
  • Padilla-Pantoja, Jessica
  • Quispe-Marcatoma, Justiniano
  • Landauro, Carlos V.
  • Peña-Rodríguez, Víctor A.
  • Santiso, José
This article belongs to the Special Issue Surface Engineering of Thin Films., Magnetic shape memory alloys have attracted considerable attention due to their multifunctional properties. Among these materials, Ni-Mn-Ga alloys are distinguished by their ability to achieve up to 10% strain when exposed to a magnetic field, a characteristic predominantly observed in single-crystal samples. Consequently, it is essential to develop nanomaterials with a crystal structure closely resembling that of a single crystal. In this study, an epitaxial Ni-Mn-Ga thin film was fabricated using Pulsed Laser Deposition on an Al2O3 ( 11 2 ¯ 0 ) single-crystal substrate. The crystal structure was characterised through X-ray diffraction methodologies, such as symmetrical 2 θ − ω scans, pole figures, and reciprocal space maps. The results indicated that the sample was mainly in a slightly distorted cubic austenite phase, and some incipient martensite phase also appeared. A detailed microstructural analysis, performed by transmission electron microscopy, confirmed that certain regions of the sample exhibited an incipient transformation to the martensite phase. Regions closer to the substrate retained the austenite phase, suggesting that the constraint imposed by the substrate inhibits the phase transition. These results indicate that it is possible to grow high crystalline quality thin films of Ni-Mn-Ga by Pulsed Laser Deposition., The authors acknowledge PROCIENCIA-CONCYTEC for funding the project under contract code PE501079047-2022. This research was further supported by the Universidad Nacional Mayor de San Marcos (Project numbers: B23131861 and B22139675x). G.P. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 101007825 (ULTIMATE-I Project) for a research stay at ICN2. This research was also funded by the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 101007417, having benefitted from the access provided by ICN2 in Bellaterra (Spain) within the framework of the NFFA-Europe Pilot Transnational Access Activity, proposal ID530. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vanadium incorporation in ferrite nanoparticles serves as an electron buffer and anisotropy tuner in catalytic and hyperthermia applications

  • Torres, Teobaldo E.
  • Valdés, Daniela Paola
  • Hettler, Simon
  • Nuñez, Jorge M.
  • Rodrigo, I.
  • Orue, Iñaki
  • García, J. Á.
  • Plazaola, F.
  • Zysler, Roberto Daniel
  • Lima Jr., Enio
  • Aguirre, Myriam H.
  • Goya, Gerardo F.
  • Arenal, Raúl
Cancer research has gradually shifted its focus from individual therapies to a combination of them for enhanced treatment effectiveness. In particular, the increased interest in the field of catalytic medicine through nanozymes proposes promising combinations with photothermal therapy, photodynamic therapy, and magnetic fluid hyperthermia (MFH). Nanozyme activity centers around the hydroxyl radical ˙OH, the most toxic of the reactive oxygen species (ROS). With a synergistic approach in mind, we studied VxFe3−xO4 magnetic nanoparticles (MNPs) as agents for ROS production and heating. These MNPs were exhaustively characterised both morphologically and magnetically. A compositional analysis through electron microscopy and spectroscopy unveils a core–shell structure with a V-rich shell. A study of the power absorption of these MNPs fixed into a gel matrix, emulating cytosol viscosity, provides values of up to 1000 W g−1 for samples with 0.5 wt% MNPs, an AC magnetic field amplitude of 65 mT and a frequency of 350 kHz, typical in the MFH application. A concentration of the ˙OH-adduct of up to 2300 nM has been measured through electron spin resonance analysis as a result of peroxidase-like activity. Through the comparison with similarly-sized ferrite MNPs, we determined that V incorporation lowers the magnetic anisotropy and serves as an electron buffer, explaining the enhanced MFH and ROS-production results., T. E. T. acknowledges funding from the European Union's Horizon Europe Research and Innovation program under the Marie Sklodowska-Curie grant agreement no. 101068591. D. P. V. and J. M. N. thank CONICET-Argentina for their doctoral fellowships. The authors acknowledge funding from projects H2020-MSCA-RISE-2021 ULTIMATE-I project no. 101007825 and H2020-MSCA-RISE-2020 101007629-NESTOR and Basque Government grant no. IT-1005-16. G. F. G. acknowledges the Spanish MICIU PID2019-106947RB-C21/AEI/10.13039/501100011033. R. A. acknowledges the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI/10.13039/501100011033), the U. Zaragoza (14446-UZ2023-CIE-02) and the DGA project E13-23R.TEM and XPS studies were conducted at the Laboratorio de Microscopias Avanzadas (LMA), U. Zaragoza, Spain., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-quality epitaxial five-layer Aurivillius films with in-plane ferroelectricity for electrocaloric cooling

  • Lafuerza, Sara
  • Blasco, Javier
  • Evangelisti, Marco
  • Subías, Gloria
  • Gracia, David
  • Pardo, José M.
  • Barriuso, Eduardo
  • Torrelles, Xavier
  • Padilla Pantoja, Jessica
  • Caicedo, José Manuel
  • Santiso, José
High-quality purely c-axis oriented epitaxial thin films of the Aurivillius phase Sr2Bi4Ti5O18 with n = 5 (Sr,Bi)TiO3 perovskite-like layers, are grown on SrTiO3 substrates by pulsed laser deposition. The highest crystalline quality is obtained with a 20 wt.% Bi-excess target and average stacking order values in the proximity of the ideal value n = 5 are attained for an optimum deposition temperature of 650 °C. Scanning transmission electron microscopy reveals regions with n ranging from 4 to 6 around an average thickness of n = 5, in agreement with the X-ray diffraction analysis. Interdigital electrodes are used to probe the in-plane polarization and survey the electrocaloric properties. A maximum adiabatic temperature change of ΔT ∼ 0.95 °C for an electric field of 150 kV cm−1 is observed at ≈135 °C. Larger values are expected at higher temperatures around the ferroelectric Curie temperature, TC. Since TC of Sr2Bi4Ti5O18 can be tuned by codoping, the findings pave the way toward a large electrocaloric effect at ambient temperature., S.L. acknowledges funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 101029019. This work was also supported by Ministerio de Ciencia, Innovación y Universidades (PID2021-124734OB-C21), “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2023-001286-S, CEX2023-001263-S and CEX2021-001214-S) and Diputación General de Aragón (E11-23R, E12-23R). D. G. acknowledges financial support from the Gobierno de Aragón through a doctoral fellowship. Authors would like to acknowledge C. Cosculluela from Unidad Técnica en Ingeniería de Microdispositivos (INMA) and R. Valero for the IDEs fabrication at the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas”, through Servicio General de Apoyo a la Investigación from Universidad de Zaragoza. The authors also acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. J. S. acknowledges B. Mundet, F. Belarre and M. Rosado for the STEM images and FIB fabrication of the lamellas, as well as the financial support of the European Commission through the Horizon H2020 funding by H2020-MSCA-RISE-ID:101007825 –ULTIMATE-I. X. T. acknowledges financial support by Ministerio de Ciencia, Innovación y Universidades (PID2021-123276OB-I00)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001286-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advancements in polyol synthesis: expanding chemical horizons and Néel temperature tuning of CoO nanoparticles

  • Baričić, Miran
  • Nuñez, Jorge M.
  • Aguirre, Myriam H.
  • Hrabovsky, David
  • Seydou, Mahamadou
  • Meneghini, Carlo
  • Peddis, Davide
  • Ammar, Souad
The dataset used and/or analyzed during the current study is available from the corresponding author on reasonable request., The polyol synthesis of CoO nanoparticles (NPs) is typically conducted by dissolving and heating cobalt acetate tetrahydrate and water in diethylene glycol (DEG). This process yields aggregates of approximately 100 nm made of partially aligned primary crystals. However, the synthesis demands careful temperature control to allow the nucleation of CoO while simultaneously preventing reduction, caused by the activity of DEG. This restriction hinders the flexibility to freely adjust synthesis conditions, impeding the ability to obtain particles with varied morpho-structural properties, which, in turn, directly impact chemical and physical attributes. In this context, the growth of CoO NPs in polyol was studied focusing on the effect of the polyol chain length and the synthesis temperature at two different water/cations ratios. During this investigation, we found that longer polyol chains remove the previous limits of the method, allowing the tuning of aggregate size (20–150 nm), shape (spherical-octahedral), and crystalline length (8–35 nm). Regarding the characterization, our focus revolved around investigating the magnetic properties inherent in the synthesized products. From this point of view, two pivotal findings emerged. Firstly, we identified small quantities of a layered hydroxide ferromagnetic intermediate, which acted as interference in our measurements. This intermediate exhibited magnetic properties consistent with features observed in other publications on CoO produced in systems compatible with the intermediate formation. Optimal synthetic conditions that prevent the impurity from forming were found. This resolution clarifies several ambiguities existing in literature about CoO low-temperature magnetic behavior. Secondly, a regular relationship of the NPs' TN with their crystallite size was found, allowing us to regulate TN over ~ 80 K. For the first time, a branching was found in this structure-dependent magnetic feature, with samples of spheroidal morphology consistently having lower magnetic temperatures, when compared to samples with faceted/octahedral shape, providing compelling evidence for a novel physical parameter influencing the TN of a material. These two findings contribute to the understanding of the fundamental properties of CoO and antiferromagnetic materials., The Agence Nationale de la Recherche (ANR) and the Commissariat à l’Investissement d’Avenir (CGI) are gratefully acknowledged for their financial support of this work through the Labex SEAM grant (N°Horge). We also acknowledge the financial support of H2020-MSCA-RISE-2020 MELON Project #872631 and MSCA-RISE-2021 ULTIMATE-I Project #101007825, and the access to TEM equipment at LMA-university of Zaragoza to perform TEM studies. Finally, we acknowledge the staff of the MPBT (physical properties – low temperature) platform of Sorbonne Université for their support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electronic structure tunability of carbon-based 1D-polymers combining cross-conjugation and nitrogen doping

  • Candia, Adriana E.
  • Vilas-Varela, Manuel
  • Aguirre, Myriam H.
  • Rogero, Celia
  • Serrate, David
  • Peña, Diego
  • Lobo-Checa, Jorge
Quasi-one-dimensional polymer structures with extended π-electron systems stand out due to their remarkable application in light-emitting diodes and devices. Upon smart choice of their building units, such carbon-based organic nanoarchitectures provide excellent optoelectronic properties by tuning their dimensionality, atomic structure or intrinsic doping. Here, we generate and study three canonical cross-conjugated quasi one-dimensional chains with controlled nitrogen intrinsic doping, which is selectively introduced into their poly-phenylene backbones. By means of scanning tunneling microscopy and spectroscopy we corroborate that the cross-conjugation that break the chain linearity is exclusively responsible of the electronic confinement in the straight segments. Moreover, we demonstrate that the LUMO state exhibits similar spatial distribution for the cross-conjugated polymers independently of the pyridine content of the initial precursor. Despite this coincidence, the semiconducting character and other relevant electronic properties of the polymers are found to depend both on the chain morphology and on the precise position and number of doping nitrogen atoms synthetically introduced into the molecular precursors. We compare these results to related previous studies, which allows us to unambiguously validate the opto-electronic tunability upon the choice of the polymers’ building units., A. E. C. thanks finanacial support from grant PICT-INVI-00863 of the Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET) and the Agencia Nacional de Promoción Científica y Tecnológica (ANPCyT) and also the financial support through IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and Materials Physics Center on behalf of the Department of Education of the Basque Government. We further acknowledge financial support from Grant References No. PID2022-138750NB-C21 (J. L.-C., A. E. C., D. S.), PID2022-140845OB-C62 (D. P. and M. V.-V.) funded by MCIN/AEI/10.13039/501100011033, by “ERDF A way of making Europe” and “European Union NextGenerationEU/PRTR”. Also financing from the European Research Council under European Union's Horizon 2020 research and innovation programme of Marie Skłodowska-Curie grant agreement ULTIMATE-I No 101007825 (M. H. A., A. E. C., J. L.-C.) is acknowledged. We also thank the Aragonese Projects RASMIA E12_23R (J. L.-C.) and NANOMIDAS E13_23R (D. S., M. H. A.), co-funded by Fondo Social Europeo. We thank support from the European Regional Development Fund of the European Union and from Xunta de Galicia (Centro de Investigacion de Galicia accreditation 2019–2022, ED431G 2019/03)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phase stability and structural evolution of core/shell iron oxide nanoparticles due to oxidative diffusion: Implications for spintronic application

  • Nuñez, Jorge M.
  • Lima Jr., Enio
  • Lohr, Javier
  • Vásquez Mansilla, Marcelo
  • Zysler, Roberto Daniel
  • Tolley, Alfredo
  • Bartolomé, Fernando
  • Rubín, Javier
  • Hettler, Simon
  • Arenal, Raúl
  • Aguirre, Myriam H.
  • Winkler, Elin L.
Core/shell iron oxide nanoparticles are promising candidates for spintronic applications due to their tunable magnetic properties and interfacial exchange interactions that allow the modulation of spin-polarized conduction. However, their performance depends critically on phase stability and structural integrity under fabrication and operating conditions involving thermal and oxidative diffusion. This study examines the transformation of iron oxide nanoparticles induced by oxidative diffusion in thermal annealing from wüstite to hematite through an intermediate (wüstite)-core/(magnetite–maghemite)-shell structure. The nanoparticles exhibit a rounded cubic morphology, with a distorted C2/m FeO phase at the core under compressive strain along (010), while the Fe3O4 shell exhibits tensile strain along (110). Oxygen diffusion occurs preferentially along [100] from the cube faces, influencing shape evolution. The system exhibits an exchange bias field of up to 3 kOe and enhanced magnetic hardening of up to 4 kOe, attributed to interfacial exchange interactions. Higher annealing temperature promotes the formation of γ-Fe2O3 with ordered vacancies. The exchange bias effect persists, even when the FeO core is smaller than 1 nm in size, indicating that the strain stabilizes the antiferromagnetic (AFM) order and enhances core/shell magnetic coupling. As oxidation proceeds, strain is gradually relaxed, and at 873 K, the oxidation to hematite is promoted, characterized by a Morin transition at 245 K. These findings reveal the intricate relationship between oxidation-driven structural evolution and magnetic behavior in engineered nanoparticle systems, underscoring the critical importance of material selection tailored to specific fabrication processes, operating conditions, and device performance requirements., The authors also gratefully acknowledge the European Commission for the financial support under the H2020-MSCA-RISE-2020 (NESTOR) PROJECT No 101007629, H2020-MSCA-RISE-2020 (ULTIMATE-I) Project No 101007825 and H2020-MSCA-RISE-2019 (MELON) Project No 872631. R.A. and S.H. acknowledge the funding by the Gobierno de Aragón (DGA) under project E13-23R and by the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033, and CEX2023-001286-S MICIU/AEI/10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lattice-tunable substituted iron garnets for low-temperature magnonics

  • Legrand, William
  • Kemna, Yana
  • Schären, Stefan
  • Wang, Hanchen
  • Petrosyan, Davit
  • Holder, Luise
  • Schlitz, Richard
  • Aguirre, Myriam H.
  • Lammel, Michaela
  • Gambardella, Pietro
arXiv:2407.06850v2, The synthesis of nm-thick epitaxial films of iron garnets by physical vapor deposition has opened up exciting opportunities for the on-chip generation and processing of microwave signals encoded in magnons. However, iron garnet thin films suffer from demanding lattice-matching and stoichiometry requirements. Here a new approach to their synthesis is developed, enabling a precise and continuous tuning of iron garnet compositions based on the co-sputtering of binary oxides. By substituting a controlled proportion of iron with additional yttrium, Y3(YxFe5−x)O12 films of high crystalline quality are obtained, combining a widely tunable lattice parameter and excellent magnetization dynamics. This enables iron garnet thin films suited for cryogenic applications, which have long remained impractical due to microwave losses caused by paramagnetic garnet substrates. Low-temperature ferromagnetic resonance confirms the elimination of substrate paramagnetic losses for Y3(YxFe5−x)O12 films lattice-matched to Y3Sc2Ga3O12 (YSGG), a diamagnetic substrate. The Y3(YxFe5−x)O12 system can be matched to other substrates such as (Gd, Y)3Sc2Ga3O12. Bi-substituted films of (Bi0.8Y2.2)Fe5O12 also have ideal lattice matching to YSGG, demonstrating the versatility of this approach. This opens unprecedented options for cation substitutions in iron garnet films, offering a promising avenue to new properties and quantum magnonic devices operating in low-temperature environments., This research was partially supported by the Swiss National Science Foundation (Grant No. 200020-200465). W.L. acknowledges the support of the ETH Zurich Postdoctoral Fellowship Program (21-1 FEL-48). H.W. acknowledges the support of the China Scholarship Council (CSC, Grant No. 202206020091). M.L. and R.S. acknowledge support from the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) via the SFB 1432, Project No. 425217212. M.L. additionally acknowledges support via Project No. 490730630. The authors acknowledge the financial support of European Commission through Marie Skłodowska-Curie Actions H2020 RISE with the projects MELON (Grant No. 872631) and ULTIMATE-I (Grant No. 101007825), and access to the equipment of “Servicio General de Apoyo a la Investigación (SAI), Universidad de Zaragoza”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene quantum dots drive spontaneous metal reduction to form stable and electroactive core-shell nanocolloids

  • Ventre, Josefina
  • Barrionuevo, Santiago D.
  • Nuñez, Jorge M.
  • Renna, Agustina
  • Faccio, Ricardo
  • Aguirre, Myriam H.
  • Bellino, Martin G.
  • Ibañez, Francisco J.
This work demonstrates a spontaneous synthesis of ∼8.0, ∼7.0, and ∼3.0 nm diameter Au, Ag, and Pt cores; respectively, wrapped by as-synthesized crystalline graphene-quantum dots (GQDs). Functional sp2- and sp3-hybridized carbons play a crucial role upon the synthesis, electronic distribution at the interface, and conductive sites for improving the electrocatalytic response. Au nanohybrids (NHs) demonstrated two-fold increase in current density with respect to conventional citrate-coated Au nanoparticles. This was attributed to conductive sp2- hybridized carbons and the gain of charge density at the surface of Au as demonstrated by DFT calculations. Due to the sp3-carbons at the shell, these NHs also behave like simple chemical compounds because they can be precipitated, stored for long periods of time, and redispersed without apparent changes in their properties. The resultant nanocolloids exhibit exceptional stability under harsh conditions. These attributes make them useful NHs with great potential for broad applications., We gratefully acknowledge financial support from PICT (2019–2188), PIP-2022–2024 0001 (CONICET), and Proyecto de Incentivos 2019-X-887 from UNLP. We also acknowledge the financial support of European Commission through Marie Skłodowska-Curie Actions H2020 RISE with the projects MELON (Grant No. 872631) and ULTIMATE-I (Grant No. 101007825). Authors would like to acknowledge the access of equipment of “Servicio General de Apoyo a la Investigación (SAI), Universidad de Zaragoza”. RF acknowledges the Uruguayan founding institution CSI, ANII, and PEDECIBA. SB and JV want to acknowledge Agostina Chapana for discussion on FT-IR spectrum of GQDs. SB and JV acknowledge CONICET for their scholarships supported by CONICET., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Perpendicularly magnetized Tb/Co multilayers featuring tilted uniaxial anisotropy: Experiments and modeling

  • Rodriguez, Jean C.
  • Avilés-Félix, Luis
  • Aguirre, Myriam H.
  • Rodríguez, Luis M.
  • Salomoni, David
  • Auffret, Stéphane
  • Sousa, Ricardo C.
  • Prejbeanu, Ioan Lucian
  • Bruchhausen, Axel E.
  • De Biasi, Emilio
  • Curiale, Javier
Data will be made available on request., arXiv:2505.14849v3, Rare earth/transition metal (RE/TM) multilayers with perpendicular magnetic anisotropy are key ingredients for the development of spintronic applications. Their compensation temperature depends on the ratio of the thicknesses of rare earth and transition metal, allowing their magnetic properties to be tuned with temperature while maintaining their anisotropy even in nanometer-scale devices. In this work, we performed a thorough structural characterization and systematically investigate the magnetic properties of a whole family of ferrimagnetic [Tb/Co]×5 multilayers varying the Tb thickness in the range of 0.4nm - 1.25nm. A linear dependence of the compensation temperature on the Tb layer thickness was observed. Moreover, a uniaxial anisotropy constant of (330 ± 30)kJ∕m3, which is close to the values reported by other authors, was estimated. Additionally, we proposed a model to gain a better understanding of the angular dependence of the magnetization loops and the linear dependence of the compensation temperature. We present strong evidence demonstrating that the perpendicular anisotropy must be tilted away from the perpendicular axis in order to explain the observed features, particularly the hysteresis in the in-plane loops. Our work advances the understanding of DC magnetic properties in thin RE/TM ferrimagnetic films, which has the potential to impact different fields where these materials are involved., We thank EU-H2020-RISE project Ultra Thin Magneto Thermal Sensoring ULTIMATE-I (Grant ID. 101007825), Magnetism and Cryogenics Competence Center, and specially to C. Rojas-Sánchez and M. Yactayo from Institute Jean Lamour for complementary hysteresis loops measurements on the samples. This work was partly supported by the Argentine MinCyT Projects PICT-2021-I-INVI-00113 (project DISCO) and PICT 2019-2873, and by the University of Cuyo by Grants No. 06/C035-T1, 06/80020240100271UN and 06/80020240100273UN, and by CONICET under Grant PIBAA 2022–2023 (project MAGNETS) Grant ID. 28720210100099CO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

High-quality epitaxial five-layer Aurivillius films with in-plane ferroelectricity for electrocaloric cooling [Dataset]

  • Lafuerza, Sara
  • Blasco, Javier
  • Evangelisti, Marco
  • Subías, Gloria
  • Gracia, David
  • Pardo, José A.
  • Barriuso, Eduardo
  • Torrelles, Xavier
  • Padilla-Pantoja, Jessica
  • Caicedo, José Manuel
  • Santiso, José
[Description of methods used for collection/generation of data]: The structural characterization of the films was performed by X-ray diffraction (XRD) 2θ/ω wide scans, X-ray reflectivity (XRR) and reciprocal space maps (RSMs) of selected asymmetric reflections, by using a four-circle X-ray diffractometer (Malvern-Panalytical X'pert Pro MRD) and standard Cu Kα1,2 X-ray source with a parabolic mirror (for reciprocal space maps, a 2xGe(220) monochromator was added to the incident optics). A 2D array PIXcel detector was used. The topography of selected films was studied using atomic force microscopy (AFM) in contact mode (Keysight 5100) over different areas. The structure of the films was also analyzed by high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) on a Fisher Spectra microscope operated at 200 kV. Cross-section lamellas were prepared by focused ion beam (FIB) on a SBTO5 film deposited under optimized conditions, with the cut oriented to show STO [100] zone axis., [Ferroelectric and Electrocaloric Properties]: These properties were investigated by measuring the in-plane polarization using the IDEs with a 500 V-built-in ferroelectric tester (Precision Premier II model, Radiant Technologies). Hysteresis measurements were carried out based on a bipolar triangular wave excitation, and also remanent hysteresis measurements based on half triangular waves following the principle of the positive-up negative-down (PUND) method. The frequency of the triangular wave excitation was set to 2 kHz for both measurement protocols. Temperature (T)-dependent polarization versus E field, P(E, T) curves, were measured on heating in a dedicated homemade cell allowing a maximum temperature of 140 °C. Samples were immersed in a silicon oil bath during the polarization measurements to avoid electric discharges., High-quality purely c-axis oriented epitaxial thin films of the Aurivillius phase Sr2Bi4Ti5O18 with n = 5 (Sr,Bi)TiO3 perovskite-like layers, are grown on SrTiO3 substrates by pulsed laser deposition. The highest crystalline quality is obtained with a 20 wt.% Bi-excess target and average stacking order values in the proximity of the ideal value n = 5 are attained for an optimum deposition temperature of 650 °C. Scanning transmission electron microscopy reveals regions with n ranging from 4 to 6 around an average thickness of n = 5, in agreement with the X-ray diffraction analysis. Interdigital electrodes are used to probe the in-plane polarization and survey the electrocaloric properties. A maximum adiabatic temperature change of ΔT ∼ 0.95 °C for an electric field of 150 kV cm−1 is observed at ≈135 °C. Larger values are expected at higher temperatures around the ferroelectric Curie temperature, TC. Since TC of Sr2Bi4Ti5O18 can be tuned by codoping, the findings pave the way toward a large electrocaloric effect at ambient temperature., S.L. acknowledges funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 101029019. This work was also supported by Ministerio de Ciencia, Innovación y Universidades (PID2021-124734OB-C21), “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2023-001286-S, CEX2023-001263-S and CEX2021-001214-S) and Diputación General de Aragón (E11-23R, E12-23R). D. G. acknowledges financial support from the Gobierno de Aragón through a doctoral fellowship. Authors would like to acknowledge C. Cosculluela from Unidad Técnica en Ingeniería de Microdispositivos (INMA) and R. Valero for the IDEs fabrication at the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas”, through Servicio General de Apoyo a la Investigación from Universidad de Zaragoza. The authors also acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. J. S. acknowledges B. Mundet, F. Belarre and M. Rosado for the STEM images and FIB fabrication of the lamellas, as well as the financial support of the European Commission through the Horizon H2020 funding by H2020-MSCA-RISE-ID:101007825 –ULTIMATE-I. X. T. acknowledges financial support by Ministerio de Ciencia, Innovación y Universidades (PID2021-123276OB-I00)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001263-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the use of transmitted-ion energy losses to infer implanted helium densities in materials

  • Mery, Mario
  • Aguirre, Myriam H.
  • Nuñez, Jorge M.
  • Esaulov, Vladimir A.
  • García, Carlos
  • Valdés, Jorge E.
Helium accumulation can severely degrade materials, making accurate quantification of implanted He and its effects on material structure essential. Here, we report the first exploration of using in situ transmission energy-loss measurements to infer helium densities during ion irradiation. Free-standing nanometric Ta₂O₅ films were irradiated with 9.85 keV He⁺ ions while monitoring the energy loss of transmitted ions, complemented by post-irradiation TEM. The measured energy loss evolves nonlinearly with fluence, reflecting the combined effects of helium incorporation and preferential oxygen sputtering induced oxide reduction. Post-irradiation TEM reveals bubbles with average diameters of ∼11 nm, confirming significant helium accumulation. A first-order phenomenological model is employed to describe stopping-power evolution and its relation to helium density, explicitly accounting for beam-induced material changes., M.M. acknowledges FONDECYT Postdoctorado 2021 ANID, 3210785. This work has been financially supported partially by DGIIE internal project # PI LI 19 17. V. A. Esaulov acknowledges support of DGIIE internal project # MEC-USM-2019, and the Physics De- partment at USM for its hospitality. Also, C. G., M. M., J. M. N, and M. H. A. acknowledge funding from the European Unions Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 101007825 (ULTIMATE-I Project). C. G. acknowledges the financial support received by ANID FONDEQUIP EQM140161 and ANID FONDECYT/REGULAR 1241918. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS node “Laboratorio de Microscopías Avanzadas” at the University of Zaragoza and the use of Servicio General de Apoyo a la Investigacion-SAI, Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain-induced enhancement of spin pumping in Pt/YIG bilayers

  • Solis, Lara M.
  • Carreira, Santiago J.
  • Gómez, Javier
  • Butera, Alejandro
  • Abellán, María
  • García, Carlos
  • Bonetto, Fernando
  • Vavassori, Paolo
  • Briático, Javier
  • Steren, Laura B.
  • Aguirre, Myriam H.
Enhancing spin-to-charge (S→C) conversion efficiency remains a key challenge in spintronic materials research. In this work we investigate the effect of substrate-induced strains onto the S→C efficiency. On one hand, we analyze strains-induced magnetic anisotropies in yttrium iron garnet (Y3Fe5O12, YIG) by comparing the magnetic and structural properties of YIG films grown on Gd3Ga5O12 (GGG) and (CaGd)3(MgZrGa)5O12 (SGGG) substrates. Differences in lattice mismatch—YIG//GGG (η =−0.06%) and YIG//SGGG (η =−0.83%)—lead to out-of-plane tensile strains in the first case and unexpected compressive strain in the latter. On the other hand, we study the spin injection efficiency on Pt/YIG bilayers evaluated by the inverse spin Hall effect (ISHE). We find that the resulting perpendicular magnetic anisotropy in YIG//SGGG, while not dominant over shape anisotropy, correlates with enhanced ISHE signals as observed in spin pumping ferromagnetic resonance and spin Seebeck effect experiments. Strain engineering proves effective in enhancing S→C conversion, providing insight into the design of efficient spintronic devices., This work was partially supported by PICT-2019-02781 ANPCyT and PICT-0415 ANPCyT, Argentina, H2020-MSCA-RISE-2016 Project N∘ 734187 SPICOLOST and MSCA-RISE-2021 Project N∘ 101007825 ULTIMATE-I. Carlos García acknowledges financial support from ANID FONDECYT/REGULAR 1201102, ANID FONDECYT/REGULAR 1241918 and ANID FONDEQUIP EQM140161. María Abellán acknowledge the financial support received by ANID PIA/APOYO AFB230003. The authors would like to thank the ‘Laboratorio de Microscopías Avanzadas’ and the ‘Servicio General de Apoyo a la Investigación’ at ‘Universidad de Zaragoza’ for providing access to their instruments. We also thank Claudio Bonin from the ‘Instituto de Física del Litoral (CONICET-UNL)’ for performing the MOKE measurements. F B acknowledge financial support of the European Union under the REFRESH—Research Excellence For REgion Sustainability and High-tech Industries Project N∘ CZ.10.03.01/00/22/003/0000048 via the Operational Programme Just Transition and ENREGAT supported by MŠMT, Project N∘ LM2023056., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrathin bismuth-yttrium iron garnet films with tunable magnetic anisotropy

  • Wang, Hanchen
  • Legrand, William
  • Petrosyan, Davit
  • Kang, Min-Gu
  • Karadža, Emir
  • Matsumoto, Hiroki
  • Schlitz, Richard
  • Aguirre, Myriam H.
  • Gambardella, Pietro
We report on the epitaxial growth of nm-thick films of bismuth-substituted yttrium iron garnet (BiYIG) by high-temperature off-axis radio-frequency magnetron sputtering. We demonstrate accurate control of the magnetic properties by tuning of the sputtering parameters and epitaxial strain on various (111)-oriented garnet substrates. BiYIG films with up to −0.80% lattice mismatch with the substrate remain fully strained up to 60 nm thick, maintaining a high crystalline quality. Transmission electron microscopy and energy-dispersive x-ray spectroscopy confirm coherent epitaxial growth, the absence of defects, and limited interdiffusion at the BiYIG/substrate interface. Varying the tensile or compressive strain between −0.80% and +0.56% in BiYIG allows for accurate compensation of the total magnetic anisotropy through magnetoelastic coupling. The effective magnetic anisotropy of sputtered BiYIG films can be further tuned via the off-axis deposition angle and the oxygen flow during growth, which determine the cation stoichiometry. Under optimized growth conditions, a ferromagnetic resonance (FMR) linewidth of 1 mT at 10 GHz is reliably obtained even for thicknesses as low as 10 nm. We also report small FMR linewidths in ultrathin (2–5 nm) BiYIG films grown on diamagnetic substrate yttrium scandium gallium garnet. These findings highlight the promise of low-damping, strain-engineered nm-thick BiYIG films for implementing advanced functionalities in spin-orbitronic and magnonic devices. Specifically, the magnetic-anisotropy compensation and low damping enable large cone-angle magnetization dynamics immune to magnon-magnon nonlinear scattering., This research was supported by the Swiss National Science Foundation (Grant No. 200021-236524). H.W. acknowledges the support of the China Scholarship Council (CSC, Grant No. 202206020091). W.L. acknowledges support from the ETH Zurich Postdoctoral Fellowship Program (Grant No. 21-1 FEL-48). H.M. acknowledges support from JSPS Postdoctoral Fellowship (Grant No. 23KJ1159) and Swiss Government Excellence Scholarships 2024-2025. R.S. and M.L. acknowledge funding by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation), Project No. 425217212. M.H.A. acknowledges the financial support of European Commission through Marie Skłodowska-Curie Actions H2020 RISE with the project ULTIMATE-I (Grant No. 101007825), and the access to equipment of “Servicio General de Apoyo a la Investigación (SAI), Universidad de Zaragoza.”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Charge-to-spin conversion in epitaxial and polycrystalline Bi and Bi/Ag layers

  • Nasr, Federica
  • Karadža, Emir
  • Alvarado, Santos F.
  • Binda, Federico
  • Goldenberger, Tobias
  • Zucchetti, Carlo
  • Aguirre, Myriam H.
  • Moras, Paolo
  • Matetskiy, Andrey V.
  • Sheverdyaeva, Polina M.
  • Noël, Paul
  • Gambardella, Pietro
Bi is predicted to be an efficient generator of spin–orbit torques (SOTs), with charge-to-spin conversion efficiency comparable to those of prototypical heavy metals, such as Ta, W, and Pt. However, experimental reports provide widely scattered interconversion efficiencies, while the origin of the large conversion signal in Bi/Ag bilayers remains controversial. Here, we investigate charge-to-spin conversion in epitaxial and polycrystalline Bi-based magnetic heterostructures by measuring the damping-like SOT using magneto-optic Kerr effect magnetometry, complemented by structural and spectroscopic analyses and comparison with harmonic Hall resistance measurements. We show that inserting an Ag spacer between Bi(001) and metallic ferromagnets (FeCo or Ni) enhances the SOT efficiency by more than one order of magnitude, reaching an effective spin Hall conductivity of approximately 2×105⁢(ℏ/2⁢𝑒)⁢S/m, in excellent agreement with theoretical expectations for bulk Bi. This enhancement can be consistently explained by the preservation of the structural and chemical integrity of Bi—otherwise compromised by the direct deposition of a ferromagnetic overlayer—rather than by Rashba spin–orbit coupling at the Bi/Ag interface. We show that Ag forms an atomically sharp, chemically inert interface with Bi that, unlike other metallic spacers such as Al and Cu, prevents interdiffusion and solid-state dewetting while enabling efficient charge-to-spin conversion. Angle-resolved photoemission spectroscopy reveals no measurable enhancement of the Rashba spin splitting at the Bi(001) surface upon Ag deposition. Comparative studies across epitaxial, polycrystalline, and intentionally surface-oxidized Bi films, beyond oxygen doses known to destroy Bi(001) surface states, reveal that structural disorder has a negative impact on the SOT efficiency. Meanwhile, the retention of 72% of the SOT efficiency following oxygen exposure indicates a dominant bulk contribution to spin-current generation in Bi/Ag heterostructures, yielding an effective Bi spin Hall angle of approximately 1. By establishing a direct correlation between atomic-scale integrity and charge-to-spin conversion, this study provides design principles to improve the reliability of Bi-based SOT devices and offers a robust framework for interpreting spin–charge interconversion in Bi and Bi/Ag systems., We acknowledge financial support from the Swiss National Science Foundation (Grant No. 200021-236524). P.N. acknowledges the support of the ETH Zurich Postdoctoral Fellowship Program (Grant No. 19-2 FEL-61). C.Z. acknowledges the support of IDEA League Fellowship 2024/2025. This work was partially funded through the project EUROFEL-ROADMAP ESFRI of the Italian MUR. We further acknowledge financial support from the European Commission through the Marie Skłodowska-Curie Actions H2020 RISE under the ULTIMATE-I project (Grant No. 101007825)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain Effects in [001]-Textured Co80Ir20 Thin Films with Negative Magnetocrystalline Anisotropy

  • Avilés-Félix, Luis
  • Vásquez Mansilla, Marcelo
  • Gómez, Javier E.
  • Balod, Maia
  • Padilla-Pantoja, Jessica
  • Santiso, José
  • Das, Subhakanta
  • Piramanayagam, S. N.
  • Butera, Alejandro
Co80Ir20 ferromagnetic thin films have recently been the focus of intensive research because the negative magnetocrystalline anisotropy adds to the shape anisotropy and favors a strong alignment of the magnetization in the film plane for [001]-textured or epitaxial thin films. However, the role of magnetoelastic effects has not been properly considered in most published research. In this work, we have performed a detailed analysis of 24 nm Co80Ir20 thin films deposited on Si/SiO2 with different underlayers (Ta, Pt) and overlayers in order to induce [001]-textured growth and different degrees of strain. Using X-ray diffraction measurements, we have found that the c-axis lattice parameter depends on the underlayer material (larger negative strain for Ta), but the degree of texture and the average grain size remain essentially constant, except in one of the multilayers. Differences in magnetic behavior according to the underlayer were also found in room-temperature magnetization vs field loops and temperature-dependent dc magnetization measurements. Anisotropy was quantified using ferromagnetic resonance, which showed that the effective anisotropy field is also dependent on the underlayer. Ta underlayers show an anisotropy close to that expected for shape, while the Pt underlayer induces an additional in-plane anisotropy field of the order of 7–9 kOe. A simple model of stress-induced anisotropy gives anisotropy field values similar to those observed experimentally. The correlation between observed strain and anisotropy, together with the similarity in microstructural properties, strongly suggests that stress effects cannot be disregarded when analyzing the magnetic data for the estimation of the magnetocrystalline contribution., Technical support from Rubén E. Benavides, César Pérez, and Matías Guillén is greatly acknowledged. This work was partially supported by U.N. Cuyo 06/800202240100120UN, 06/80020240100273UN, 06/80020240100271UN, PIBAA 2022-2023 project MAGNETS Grant ID 28720210100099CO, and ANPCyT PICT 2021-00113 project DISCO, all from Argentina. We acknowledge the financial support of the European Commission through the H2020-MSCA RISE project ULTIMATE-I (Grant No. 101007825). Linguistic and grammatical corrections were assisted by AI-based language models. S.K. acknowledges the research scholarship of NTU Singapore and SNP acknowledges the support by the Ministry of Education, Singapore for MOE Tier 2 grant MOET2EP50122-0023., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Novel Ir1–xCoxO2 thin films: Growth and characterization

  • Laguna–Marco, M. A.
  • Herrero-Albillos, J.
  • Aguirre, M. H.
  • Rueda-Jiménez, M.
  • Mikulska, I.
Ir1–xCoxO2 thin films have been prepared by reactive co–sputtering deposition at room temperature. Composition, structure, electronic properties and electric and magnetic behavior have been analyzed by different techniques including XRR, XRD, TEM microscopy, SQUID magnetometry, electrical resistivity and XAS spectroscopy. After annealing, an Ir1–xCoxO2 substitutional solid solution phase with rutile crystal structure was achieved for a wide Co-doping range 0 ≤ x ≤ 0.6. Starkly departing from the highly insulating behavior of CoO and Co3O4, the electrical resistivity at room temperature of our films is only slightly higher than that of IrO2. Likewise, our work shows that the magnetic response of the doped films is very similar to that of the paramagnetic parent IrO2. Neither ferromagnetism nor enhanced paramagnetism is observed. XAS spectra indicate a Co3+ oxidation state and, correspondingly, an oxidation state of ∼5+ for Ir ions in the polycrystalline Ir0.6Co0.4O2 film. By application of sum rules, a 13 % increase in the spin–orbit coupling is found despite the lattice shrinkage causes a detrimental bandwidth broadening.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Stacking-configuration-preserved Graphene quantum dots electrochemically obtained from CVD Graphene

  • Barrionuevo, Santiago D.
  • Fioravanti, Federico
  • Núñez, Jorge M.
  • Muñeton Arboleda, David
  • Lacconi, Gabriela I.
  • Bellino, Martín G.
  • Aguirre, Myriam H.
  • Ibáñez, Francisco J.
The layer stacking morphology in nanocarbons is paramount for achieving new properties and outperforming applications. Here, we demonstrate that graphene quantum dots (GQDs) retain crystallinity and a stacking structure from CVD graphene grown on Ni foam. Our results reveal that GQD subdomains comprise a few-layer graphene structure in the AB···AB and ABC···ABC stacking configuration. HR-TEM images along with a multiple-approach characterization (XRD, XPS, UV–vis, AFM, and ATR-IR) exhibit ∼3.0 to ∼8.0 nm crystalline GQDs with 2–6 graphene layers thick indicating a disk-shape structure. The UV–vis profiles show changes in color of the dispersion (from colorless to red) during and after the electrochemistry, suggesting a systematic electrooxidation of graphene into smaller, highly crystalline, and more complex sp2/sp3 structures. Importantly, a control experiment performed under the same conditions but with a graphitic rod exhibited large, polydisperse, and multilayer carbon structures. This work demonstrates a relatively easy electrochemical synthesis to obtain GQDs which retain the pristine and, in turn, distinctive structure of graphene grown on Ni foam.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Magnetic transition and spin-polarized two-dimensional electron gas controlled by polarization switching in strained CaMnO3/BaTiO3

  • Di Napoli, S.
  • Román, A.
  • Llois, A. M.
  • Aguirre, M. H.
  • Steren, L. B.
  • Barral, M. A.
Ab initio calculations show the presence of a strong magnetoelectric interfacial coupling in a CaMnO 3 ultrathin film grown on a strained BaTiO 3 Ferroelectric film. This heterostructure presents a polarization driven magnetic transition from a G-type to an A-type antiferromagnetic structure. Together with this magnetic transition we find a metallic behavior at the interface between these two insulators, where the charge character of the carriers can be tuned from electrons to holes by switching the electric polarization direction of the ferroelectric film. Besides, the electron gas is spin polarized while the hole gas is not.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Discarding metal incorporation in pyrazole macrocycles and the role of the substrate on single-layer assemblies

  • Lobo-Checa, Jorge
  • Rodríguez, Sindy Julieth
  • Hernández-López, Leyre
  • Herrer, Lucía
  • Passeggi, Mario C. G.
  • Cea, Pilar
  • Serrano, José Luis
Pyrazole derivatives are key in crystal engineering and liquid crystal fields and thrive in agriculture, pharmaceutical, or biomedicine industries. Such versatility relies in their supramolecular bond adaptability when forming hydrogen bonds or metal-pyrazole complexes. Interestingly, the precise structure of pyrazole-based macrocycles forming widespread porous structures is still unsolved. We bring insight into such fundamental question by studying the self-assembled structures of a bis-pyrazole derivative sublimed in ultra-high-vacuum conditions (without solvents) onto the three (111) noble metal surfaces. By means of high-resolution scanning tunneling microscopy that is validated by gas phase density functional theory calculations, we find a common hexagonal nanoporous network condensed by triple hydrogen bonds at the molecule–metal interface. Such assembly is disrupted and divergent after annealing: (i) on copper, the molecular integrity is compromised leading to structural chaos, (ii) on silver, an incommensurate new oblique structure requiring molecular deprotonation is found and, (iii) on gold, metal–organic complexes are promoted yielding irregular chain structures. Our findings confirm the critical role of these metals on the different pyrazole nanoporous structure formation, discarding their preference for metal incorporation into the connecting nodes whenever there is no solvent involved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Advancements in polyol synthesis: expanding chemical horizons and Néel temperature tuning of CoO nanoparticles

  • Baricic, Miran
  • Nuñez, Jorge M.
  • Aguirre, Myriam H.
  • Hrabovsky, David
  • Seydou, Mahamadou
  • Meneghini, Carlo
  • Peddis, Davide
  • Ammar, Souad
The polyol synthesis of CoO nanoparticles (NPs) is typically conducted by dissolving and heating cobalt acetate tetrahydrate and water in diethylene glycol (DEG). This process yields aggregates of approximately 100 nm made of partially aligned primary crystals. However, the synthesis demands careful temperature control to allow the nucleation of CoO while simultaneously preventing reduction, caused by the activity of DEG. This restriction hinders the flexibility to freely adjust synthesis conditions, impeding the ability to obtain particles with varied morpho-structural properties, which, in turn, directly impact chemical and physical attributes. In this context, the growth of CoO NPs in polyol was studied focusing on the effect of the polyol chain length and the synthesis temperature at two different water/cations ratios. During this investigation, we found that longer polyol chains remove the previous limits of the method, allowing the tuning of aggregate size (20–150 nm), shape (spherical-octahedral), and crystalline length (8–35 nm). Regarding the characterization, our focus revolved around investigating the magnetic properties inherent in the synthesized products. From this point of view, two pivotal findings emerged. Firstly, we identified small quantities of a layered hydroxide ferromagnetic intermediate, which acted as interference in our measurements. This intermediate exhibited magnetic properties consistent with features observed in other publications on CoO produced in systems compatible with the intermediate formation. Optimal synthetic conditions that prevent the impurity from forming were found. This resolution clarifies several ambiguities existing in literature about CoO low-temperature magnetic behavior. Secondly, a regular relationship of the NPs' TN with their crystallite size was found, allowing us to regulate TN over ~ 80 K. For the first time, a branching was found in this structure-dependent magnetic feature, with samples of spheroidal morphology consistently having lower magnetic temperatures, when compared to samples with faceted/octahedral shape, providing compelling evidence for a novel physical parameter influencing the TN of a material. These two findings contribute to the understanding of the fundamental properties of CoO and antiferromagnetic materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Intrinsic and extrinsic relaxation mechanisms for controlling spin current intensity in Fe100-xCox/Ta bilayers

  • Velázquez Rodriguez, D
  • Gómez, J E
  • Avilés-Félix, L
  • Ampuero Torres, J L
  • Torres, T E
  • Pérez Martínez, A A
  • Morbidel, L
  • Goijman, D
  • RojasSánchez, J C
  • Aguirre, M H
  • Milano, J
  • Butera, A
Controlling the damping parameter in metallic ferromagnetic thin films is a key step for spintronic applications in which spin currents are generated by spin pumping. The coexistence of two states with low and high damping constant values would allow to obtain states of high and low spin current intensity, respectively. We have fabricated Fe100−xCox/Ta (with nominal x =0, 15, 20, 25, 30 and 35) bilayers in which the Fe100−xCox layers grow epitaxially and the Ta layer is polycrystalline. We have found the coexistence of Gilbert damping and two magnon scattering mechanisms linked to a sign change in the magnetocrystalline anisotropy constant that allows the manipulation of low and high intensity states of the measured inverse spin Hall effect voltage. Bilayers with lower Co concentrations (x ⩽ 25%) present different relaxation mechanisms (isotropic Gilbert damping and two magnon scattering) and an extra ferromagnetic resonance linewidth broadening produced due to mosaicity. Bilayers with Co concentration x > 25% present a dominating Gilbert damping for all directions in the film plane. However, in this concentration range the damping constant is anisotropic and when the magnetic field is applied along the hard magnetization direction α increases ∼420% with respect to the value obtained for the easy magnetization direction. Coexistence of isotropic Gilbert damping and two magnon scattering generated spin currents 2.5 times larger when the field is applied along the hard magnetization axis compared to the value observed in the easy magnetization axis. These findings make the Fe100−xCox/Ta system an excellent candidate for spintronic device applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Improving the two-color temperature sensing using machine learning approach: GdVO4:Sm3+ prepared by solution combustion synthesis (SCS)

  • Jelic, Jovana Z.
  • Dencevski, Aleksa
  • Rabasovic, Mihailo D.
  • Krizan, Janez
  • Savic-Sevic, Svetlana
  • Nikolic, Marko G.
  • Aguirre, Myriam H.
  • Sevic, Dragutin
  • Rabasovic, Maja S.
The gadolinium vanadate doped with samarium (GdVO4:Sm3+) nanopowder was prepared by the solution combustion synthesis (SCS) method. After synthesis, in order to achieve full crystallinity, the material was annealed in air atmosphere at 900 °C. Phase identification in the post-annealed powder samples was performed by X-ray diffraction, and morphology was investigated by high-resolution scanning electron microscope (SEM) and transmission electron microscope (TEM). Photoluminescence characterization of emission spectrum and time resolved analysis was performed using tunable laser optical parametric oscillator excitation and streak camera. In addition to samarium emission bands, a weak broad luminescence emission band of host VO43− was also observed by the detection system. In our earlier work, we analyzed the possibility of using the host luminescence for two-color temperature sensing, improving the method by introducing the temporal dependence in line intensity ratio measurements. Here, we showed that further improvements are possible by using the machine learning approach. To facilitate the initial data assessment, we incorporated Principal Component Analysis (PCA), t-Distributed Stochastic Neighbor Embedding (t-SNE) and Uniform Manifold Approximation and Projection (UMAP) clustering of GdVO4:Sm3+ spectra at various temperatures. Good predictions of temperature were obtained using deep neural networks. Performance of the deep learning network was enhanced by data augmentation technique.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Structure of ZnxFe3-xO4 nanoparticles studied by neutron diffraction and its relation with their response in magnetic hyperthermia experiments

  • Lohr, J.
  • Tobia, D.
  • Torres, T. E.
  • Rodríguez, L.
  • Puente Orench, I.
  • Cuello, G. J.
  • Aguirre, M. H.
  • Campo, J.
  • Aurelio, G.
  • Lima, E.
The mixed zinc-ferrite spinel magnetic nanoparticles (MNPs) with the general formula ZnxFe3−xO4 are among the most extensively studied families of Fe oxides due to their interesting and diverse chemical, electronic, and magnetic properties. These systems offer the possibility of surface functionalization and possess high biocompatibility, making them highly attractive for applications in biomedicine, such as magnetic fluid hyperthermia (MFH). The efficiency of the MFH process relies on the magnetic, structural and morphological properties of the MNPs. The substitution with the Zn ion and the cationic distribution, as well as the synthesis process employed, have a direct impact on the final properties of these oxides. Therefore, it is essential to have tools that enable a comprehensive characterization of the system to assess its performance in MFH. In this study, we have synthesized four ZnxFe3−xO4 MNP systems using three different methods: two by thermal decomposition at high temperatures, one by co-precipitation, and another by co-precipitation followed by ball milling. We analyze the effect of these various synthesis processes on the magnetic and crystallographic properties, aiming to correlate them with the response of each system in MFH. Neutron diffraction data are employed to determine the cation site occupation and to investigate the correlation with the synthesis method. MFH measurements were conducted in media of diverse viscosities, revealing different values of specific loss power, thus demonstrating a clear dependence on the synthesis process and Zn content.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Mechanism of oxygen reduction <i>via</i> chemical affinity in NiO/SiO<sub>2</sub> interfaces irradiated with keV energy hydrogen and helium ions for heterostructure fabrication

  • Mery, Mario
  • Gonzalez-Fuentes, Claudio
  • Stankovic, Igor
  • Nuñez, Jorge M.
  • Valdés, Jorge E.
  • Aguirre, Myriam H.
  • García, Carlos
Low-energy light ion beams are an essential resource in lithography for nanopatterning magnetic materials and interfaces due to their ability to modify the structure and properties of metamaterials. Here we create ferromagnetic/non-ferromagnetic heterostructures with a controlled layer thickness and nanometer-scale precision. For this, hydrogen ion (H+) irradiation is used to reduce the antiferromagnetic nickel oxide (NiO) layer into ferromagnetic Ni with lower fluence than in the case of helium ion (He+) irradiation. Our results indicate that H+ chemical affinity with oxygen is the primary mechanism for efficient atom remotion, as opposed to He+ irradiation, where the chemical affinity for oxygen is negligible.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Vanadium incorporation in ferrite nanoparticles serves as an electron buffer and anisotropy tuner in catalytic and hyperthermia applications

  • Torres, T. E.
  • Valdés, D. P.
  • Hettler, S.
  • Nuñez, J. M.
  • Rodrigo, I.
  • Orue, I.
  • García, J. Á.
  • Plazaola, F.
  • Zysler, R. D.
  • Lima, E.
  • Aguirre, M. H.
  • Goya, G. F.
  • Arenal, R.
Cancer research has gradually shifted its focus from individual therapies to a combination of them for enhanced treatment effectiveness. In particular, the increased interest in the field of catalytic medicine through nanozymes proposes promising combinations with photothermal therapy, photodynamic therapy, and magnetic fluid hyperthermia (MFH). Nanozyme activity centers around the hydroxyl radical ˙OH, the most toxic of the reactive oxygen species (ROS). With a synergistic approach in mind, we studied VxFe3−xO4 magnetic nanoparticles (MNPs) as agents for ROS production and heating. These MNPs were exhaustively characterised both morphologically and magnetically. A compositional analysis through electron microscopy and spectroscopy unveils a core–shell structure with a V-rich shell. A study of the power absorption of these MNPs fixed into a gel matrix, emulating cytosol viscosity, provides values of up to 1000 W g−1 for samples with 0.5 wt% MNPs, an AC magnetic field amplitude of 65 mT and a frequency of 350 kHz, typical in the MFH application. A concentration of the ˙OH-adduct of up to 2300 nM has been measured through electron spin resonance analysis as a result of peroxidase-like activity. Through the comparison with similarly-sized ferrite MNPs, we determined that V incorporation lowers the magnetic anisotropy and serves as an electron buffer, explaining the enhanced MFH and ROS-production results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Electronic structure tunability of carbon-based 1D-polymers combining cross-conjugation and nitrogen doping

  • Candia, Adriana E.
  • Vilas-Varela, Manuel
  • Aguirre, Myriam H.
  • Rogero, Celia
  • Serrate, David
  • Peña, Diego
  • Lobo-Checa, Jorge
Quasi-one-dimensional polymer structures with extended π-electron systems stand out due to their remarkable application in light-emitting diodes and devices. Upon smart choice of their building units, such carbon-based organic nanoarchitectures provide excellent optoelectronic properties by tuning their dimensionality, atomic structure or intrinsic doping. Here, we generate and study three canonical cross-conjugated quasi one-dimensional chains with controlled nitrogen intrinsic doping, which is selectively introduced into their poly-phenylene backbones. By means of scanning tunneling microscopy and spectroscopy we corroborate that the cross-conjugation that break the chain linearity is exclusively responsible of the electronic confinement in the straight segments. Moreover, we demonstrate that the LUMO state exhibits similar spatial distribution for the cross-conjugated polymers independently of the pyridine content of the initial precursor. Despite this coincidence, the semiconducting character and other relevant electronic properties of the polymers are found to depend both on the chain morphology and on the precise position and number of doping nitrogen atoms synthetically introduced into the molecular precursors. We compare these results to related previous studies, which allows us to unambiguously validate the opto-electronic tunability upon the choice of the polymers’ building units.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High‐quality epitaxial five‐layer aurivillius films with in‐plane ferroelectricity for electrocaloric cooling

  • Lafuerza, Sara
  • Blasco, Javier
  • Evangelisti, Marco
  • Subías, Gloria
  • Gracia, David
  • Pardo, José Á.
  • Barriuso, Eduardo
  • Torrelles, Xavier
  • Padilla-Pantoja, Jessica
  • Caicedo, José M.
  • Santiso, José
High‐quality purely c‐axis oriented epitaxial thin films of the Aurivillius phase Sr2Bi4Ti5O18 with n = 5 (Sr,Bi)TiO3 perovskite‐like layers, are grown on SrTiO3 substrates by pulsed laser deposition. The highest crystalline quality is obtained with a 20 wt.% Bi‐excess target and average stacking order values in the proximity of the ideal value n = 5 are attained for an optimum deposition temperature of 650 °C. Scanning transmission electron microscopy reveals regions with n ranging from 4 to 6 around an average thickness of n = 5, in agreement with the X‐ray diffraction analysis. Interdigital electrodes are used to probe the in‐plane polarization and survey the electrocaloric properties. A maximum adiabatic temperature change of ΔT ∼ 0.95 °C for an electric field of 150 kV cm−1 is observed at ≈135 °C. Larger values are expected at higher temperatures around the ferroelectric Curie temperature, TC. Since TC of Sr2Bi4Ti5O18 can be tuned by codoping, the findings pave the way toward a large electrocaloric effect at ambient temperature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Lattice-Tunable Substituted Iron Garnets for Low-Temperature Magnonics

  • Legrand, William
  • Kemna, Yana
  • Schären, Stefan
  • Wang, Hanchen
  • Petrosyan, Davit
  • Holder, Luise
  • Schlitz, Richard
  • Aguirre, Myriam H.
  • Lammel, Michaela
  • Gambardella, Pietro
The synthesis of nm-thick epitaxial films of iron garnets by physical vapor deposition has opened up exciting opportunities for the on-chip generation and processing of microwave signals encoded in magnons. However, iron garnet thin films suffer from demanding lattice-matching and stoichiometry requirements. Here a new approach to their synthesis is developed, enabling a precise and continuous tuning of iron garnet compositions based on the co-sputtering of binary oxides. By substituting a controlled proportion of iron with additional yttrium, Y3(YxFe5−x)O12 films of high crystalline quality are obtained, combining a widely tunable lattice parameter and excellent magnetization dynamics. This enables iron garnet thin films suited for cryogenic applications, which have long remained impractical due to microwave losses caused by paramagnetic garnet substrates. Low-temperature ferromagnetic resonance confirms the elimination of substrate paramagnetic losses for Y3(YxFe5−x)O12 films lattice-matched to Y3Sc2Ga3O12 (YSGG), a diamagnetic substrate. The Y3(YxFe5−x)O12 system can be matched to other substrates such as (Gd, Y)3Sc2Ga3O12. Bi-substituted films of (Bi0.8Y2.2)Fe5O12 also have ideal lattice matching to YSGG, demonstrating the versatility of this approach. This opens unprecedented options for cation substitutions in iron garnet films, offering a promising avenue to new properties and quantum magnonic devices operating in low-temperature environments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Phase Stability and Structural Evolution of Core/Shell Iron Oxide Nanoparticles Due to Oxidative Diffusion: Implications for Spintronic Applications

  • Nuñez, Jorge M.
  • Lima, Enio
  • Lohr, Javier Hernán
  • Vásquez Mansilla, Marcelo
  • Zysler, Roberto D.
  • Tolley, Alfredo
  • Bartolomé, Fernando
  • Rubín, Javier
  • Hettler, Simón
  • Arenal, Raúl
  • Aguirre, Myriam Haydee
  • Winkler, Elin L.
Core/shell iron oxide nanoparticles are promising candidates for spintronic applications due to their tunable magnetic properties and interfacial exchange interactions that allow the modulation of spin-polarized conduction. However, their performance depends critically on phase stability and structural integrity under fabrication and operating conditions involving thermal and oxidative diffusion. This study examines the transformation of iron oxide nanoparticles induced by oxidative diffusion in thermal annealing from wüstite to hematite through an intermediate (wüstite)-core/(magnetite–maghemite)-shell structure. The nanoparticles exhibit a rounded cubic morphology, with a distorted C2/m FeO phase at the core under compressive strain along (010), while the Fe3O4 shell exhibits tensile strain along (110). Oxygen diffusion occurs preferentially along [100] from the cube faces, influencing shape evolution. The system exhibits an exchange bias field of up to 3 kOe and enhanced magnetic hardening of up to 4 kOe, attributed to interfacial exchange interactions. Higher annealing temperature promotes the formation of γ-Fe2O3 with ordered vacancies. The exchange bias effect persists, even when the FeO core is smaller than 1 nm in size, indicating that the strain stabilizes the antiferromagnetic (AFM) order and enhances core/shell magnetic coupling. As oxidation proceeds, strain is gradually relaxed, and at 873 K, the oxidation to hematite is promoted, characterized by a Morin transition at 245 K. These findings reveal the intricate relationship between oxidation-driven structural evolution and magnetic behavior in engineered nanoparticle systems, underscoring the critical importance of material selection tailored to specific fabrication processes, operating conditions, and device performance requirements.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Graphene Quantum Dots Drive Spontaneous Metal Reduction to form Stable and Electroactive Core‐Shell Nanocolloids

  • Ventre, Josefina
  • Barrionuevo, Santiago D.
  • Nuñez, Jorge M.
  • Renna, Agustina
  • Faccio, Ricardo
  • Aguirre, Myriam H.
  • Bellino, Martin G.
  • Ibañez, Francisco J.
This work demonstrates a spontaneous synthesis of ∼8.0, ∼7.0, and ∼3.0 nm diameter Au, Ag, and Pt cores; respectively, wrapped by as‐synthesized crystalline graphene‐quantum dots (GQDs). Functional sp2‐ and sp3‐hybridized carbons play a crucial role upon the synthesis, electronic distribution at the interface, and conductive sites for improving the electrocatalytic response. Au nanohybrids (NHs) demonstrated two‐fold increase in current density with respect to conventional citrate‐coated Au nanoparticles. This was attributed to conductive sp2‐ hybridized carbons and the gain of charge density at the surface of Au as demonstrated by DFT calculations. Due to the sp3‐carbons at the shell, these NHs also behave like simple chemical compounds because they can be precipitated, stored for long periods of time, and redispersed without apparent changes in their properties. The resultant nanocolloids exhibit exceptional stability under harsh conditions. These attributes make them useful NHs with great potential for broad applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Strain-induced enhancement of spin pumping in Pt/YIG bilayers

  • Solis, Lara M.
  • Carreira, Santiago J.
  • Gómez, Javier
  • Butera, Alejandro
  • Abellán, María
  • García, Carlos
  • Bonetto, Fernando
  • Vavassori, Paolo
  • Briático, Javier
  • Steren, Laura B.
  • Aguirre, Myriam H.
Enhancing spin-to-charge (S→C) conversion efficiency remains a key challenge in spintronic materials research. In this work we investigate the effect of substrate-induced strains onto the S→C efficiency. On one hand, we analyze strains-induced magnetic anisotropies in yttrium iron garnet (Y3Fe5O12, YIG) by comparing the magnetic and structural properties of YIG films grown on Gd3Ga5O12 (GGG) and (CaGd)3(MgZrGa)5O12 (SGGG) substrates. Differences in lattice mismatch—YIG//GGG (η = −0.06%) and YIG//SGGG (η = −0.83%)—lead to out-of-plane tensile strains in the first case and unexpected compressive strain in the latter. On the other hand, we study the spin injection efficiency on Pt/YIG bilayers evaluated by the inverse spin Hall effect (ISHE). We find that the resulting perpendicular magnetic anisotropy in YIG//SGGG, while not dominant over shape anisotropy, correlates with enhanced ISHE signals as observed in spin pumping ferromagnetic resonance and spin Seebeck effect experiments. Strain engineering proves effective in enhancing S→C conversion, providing insight into the design of efficient spintronic devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Perpendicularly magnetized Tb/Co multilayers featuring tilted uniaxial anisotropy: Experiments and modeling

  • Rodriguez E., J.C.
  • Avilés-Félix, L.
  • Aguirre, M.H.
  • Rodríguez, L.M.
  • Salomoni, D.
  • Auffret, S.
  • Sousa, R.C.
  • Prejbeanu, I.L.
  • Bruchhausen, A.E.
  • De Biasi, E.
  • Curiale, J.
Rare earth/transition metal (RE/TM) multilayers with perpendicular magnetic anisotropy are key ingredients for the development of spintronic applications. Their compensation temperature depends on the ratio of the thicknesses of rare earth and transition metal, allowing their magnetic properties to be tuned with temperature while maintaining their anisotropy even in nanometer-scale devices. In this work, we performed a thorough structural characterization and systematically investigate the magnetic properties of a whole family of ferrimagnetic [Tb/Co]×5 multilayers varying the Tb thickness in the range of 0.4nm - 1.25nm. A linear dependence of the compensation temperature on the Tb layer thickness was observed. Moreover, a uniaxial anisotropy constant of (330±30)kJ/m3, which is close to the values reported by other authors, was estimated. Additionally, we proposed a model to gain a better understanding of the angular dependence of the magnetization loops and the linear dependence of the compensation temperature. We present strong evidence demonstrating that the perpendicular anisotropy must be tilted away from the perpendicular axis in order to explain the observed features, particularly the hysteresis in the in-plane loops. Our work advances the understanding of DC magnetic properties in thin RE/TM ferrimagnetic films, which has the potential to impact different fields where these materials are involved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

On the use of transmitted-ion energy losses to infer implanted helium densities in materials

  • Mery, Mario
  • Aguirre, Myriam H.
  • Nuñez, Jorge M.
  • Esaulov, Vladimir A.
  • García, Carlos
  • Valdés, Jorge E.
Helium accumulation can severely degrade materials, making accurate quantification of implanted He and its effects on material structure essential. Here, we report the first exploration of using in situ transmission energy-loss measurements to infer helium densities during ion irradiation. Free-standing nanometric Ta₂O₅ films were irradiated with 9.85 keV He⁺ ions while monitoring the energy loss of transmitted ions, complemented by post-irradiation TEM. The measured energy loss evolves nonlinearly with fluence, reflecting the combined effects of helium incorporation and preferential oxygen sputtering induced oxide reduction. Post-irradiation TEM reveals bubbles with average diameters of ∼11 nm, confirming significant helium accumulation. A first-order phenomenological model is employed to describe stopping-power evolution and its relation to helium density, explicitly accounting for beam-induced material changes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ultrathin bismuth-yttrium iron garnet films with tunable magnetic anisotropy

  • Wang, Hanchen
  • Legrand, William
  • Petrosyan, Davit
  • Kang, Min-Gu
  • Karadža, Emir
  • Matsumoto, Hiroki
  • Schlitz, Richard
  • Lammel, Michaela
  • Aguirre, Myriam H.
  • Gambardella, Pietro
We report on the epitaxial growth of nm-thick films of bismuth-substituted yttrium iron garnet (BiYIG) by high-temperature off-axis radio-frequency magnetron sputtering. We demonstrate accurate control of the magnetic properties by tuning of the sputtering parameters and epitaxial strain on various (111)-oriented garnet substrates. BiYIG films with up to −0.80% lattice mismatch with the substrate remain fully strained up to 60 nm thick, maintaining a high crystalline quality. Transmission electron microscopy and energy-dispersive x-ray spectroscopy confirm coherent epitaxial growth, the absence of defects, and limited interdiffusion at the BiYIG/substrate interface. Varying the tensile or compressive strain between −0.80% and +0.56% in BiYIG allows for accurate compensation of the total magnetic anisotropy through magnetoelastic coupling. The effective magnetic anisotropy of sputtered BiYIG films can be further tuned via the off-axis deposition angle and the oxygen flow during growth, which determine the cation stoichiometry. Under optimized growth conditions, a ferromagnetic resonance (FMR) linewidth of 1 mT at 10 GHz is reliably obtained even for thicknesses as low as 10 nm. We also report small FMR linewidths in ultrathin (2–5 nm) BiYIG films grown on diamagnetic substrate yttrium scandium gallium garnet. These findings highlight the promise of low-damping, strain-engineered nm-thick BiYIG films for implementing advanced functionalities in spin-orbitronic and magnonic devices. Specifically, the magnetic-anisotropy compensation and low damping enable large cone-angle magnetization dynamics immune to magnon-magnon nonlinear scattering.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Toposelective on-surface synthesis of curved π-extended oligomers based on bowl-shaped aromatics

  • Gómez-Gómez, Marta
  • Labella, Jorge
  • Björk, Jonas
  • Candia, Adriana E.
  • Torres, Tomás
  • Lobo-Checa, Jorge
Curved π-extended systems based on bowl-shaped porphyrinoids are attractive because they exhibit unachievable properties in their planar counterparts. However, their synthesis typically yields oligomeric structures without topological control, a prerequisite for engineering materials with precise optoelectronic and physical properties. Here, we report a novel strategy to obtain exclusively syn topoisomers from ortho-dihalogenated subphthalocyanines (SubPcs) making use of on-surface synthesis methods. Using low-temperature scanning tunnelling microscopy (STM), supported by ab initio calculations, we show that the morphology and electronic structure of the products strongly depend on the halogen substituent in the precursor. Upon annealing up to 475 K, Br-substituted precursors yield covalently fused dimers and trimers sharing four- and six-membered rings, respectively, whereas F-substituted SubPcs form metal–organic chains mediated by F⋯Au and N⋯Au coordination. In contrast, Cl-substituted precursors, representing an intermediate case, require higher activation temperatures than their Br analogues, resulting in more irregular structures. In all cases, a single syn topology is observed that demonstrates the surface induced selectivity. In the covalent architectures, scanning tunnelling spectroscopy (STS) supported by Density Functional Theory (DFT) reveals that both the HOMO and LUMO are significantly perturbed upon oligomerization, resulting in modulation of the semiconducting energy gap consistent with effective π-delocalization. Altogether, these findings demonstrate that surface-assisted synthesis enables the toposelective construction of π-systems and highlight the decisive role of halogen selection in governing the formation of structurally and electronically defined architectures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

2D Abrupt Nano-Junctions Blending sp–sp2 Bonds on Atomically Precise Heterostructures

  • Cartoceti, Alice
  • Achilli, Simona
  • Alihosseini, Masoumeh
  • Candia, Adriana E.
  • Beltrami, Enrico
  • D'Agosta, Paolo
  • Biroli, Alessio Orbelli
  • Sedona, Francesco
  • Li Bassi, Andrea
  • Lobo-Checa, Jorge
  • Casari, Carlo S.
Two-dimensional heterostructures combining sp–sp2 hybridization—blending graphene with graphyne-based allotropes—offer substantial potential for enhancing the tunability of electronic and transport properties while providing significant structural flexibility, which are desirable characteristics for next-generation nanoscale electronics. Despite such potential, their experimental realization remains elusive, as synthesized carbon heterostructures are limited to doped, graphene-based systems exhibiting exclusively sp2 hybridization. Here, the on-surface synthesis of covalently bonded sp–sp2 lateral heterostructures between graphene nanoribbons and graphdiyne networks on Au(111) is demonstrated. Atomic-resolution scanning tunneling microscopy, combined with density functional theory, reveals the formation mechanism of the covalent interfacial bonds between nanoribbons and graphdiynes, also highlighting the key role of surface chemistry. Bromine atoms, deriving from the molecules dehalogenation and chemisorbed along the nanoribbon, inhibit junction formation, but bonding efficiency can be boosted up to 66% by controlled removal of these byproducts. Electronic structure and transport calculations show that the 2D heterostructure by itself is characterized by disentangled properties for the two subsystems, forming an atomically narrow junction, enabling voltage-tunable spatial current separation in two dimensions. These results define a viable strategy for engineering graphene-based sp–sp2 heterostructures, paving the way for the design and synthesis of all-carbon nanoscale electronic architectures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sol-gel synthesis and multiferroic properties of pyrochlore-free Pb(Fe0.5Nb0.5)O3 thin films

  • Imhoff, L.
  • Di Marco, M. B.
  • Barolin, S. A.
  • Rengifo, M. A.
  • Aguirre, M. H.
  • Stachiotti, M. G.
Lead iron niobate (PbFe0.5Nb0.5O3 – PFN) thin films were synthesized by a modified sol-gel route, which offers the advantage of a rapid, simple and non-toxic reaction method. Polycrystalline perovskite-structured PFN thin films without pyrochlore phases were obtained on Pt/Ti/SiO2/Si substrates after sintering by rapid thermal annealing at 650 °C. TEM and AFM images confirmed the excellent quality of the sintered film, while EDS spectroscopy revealed the presence of oxygen vacancies near the film/substrate interface. Electric measurements show good dielectric properties and ferroelectric behavior, characterized by typical C–V curves and well-defined P-E ferroelectric loops at 1 kHz, with remanent polarization values of ∼12 μC/cm2. The polarization, however, increases with decreasing frequency, indicating the presence of leakage currents. I–V measurements show a significant increase in DC-conduction at relatively low fields (around 100 kV/cm). The films display ferromagnetic behavior at room temperature, with magnetic remanence around 30 emu/cm3 and a coercive field of 1 kOe. These values are significantly higher than those obtained for PFN powders fabricated by the same sol-gel route, as well as the magnetization values reported in the literature for epitaxial films.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effects of silver nanoparticle doping on electrical, optical, and photovoltaic properties of PbZrxTi1-xO3 thin films synthesized by sol–gel

  • Di Marco, M. B.
  • Imhoff, L.
  • Roldán, M. V.
  • Santiago, M. L.
  • Aguirre, M. H.
  • Pellegri, N.
  • Stachiotti, M. G.
The effects produced by the incorporation of silver nanoparticles (Ag-NPs) of an average size of ∼4 nm on the electrical, optical, and photovoltaic properties of PbZr0.52Ti0.48O3 (PZT) thin films are investigated. The films were synthesized by a chemical solution deposition process, and two different distributions of nanoparticles in the PZT matrix were tested: (1) alternated Ag-NPs and PZT layers, and (2) distributed Ag-NPs over the entire film volume. The resulting films, with thicknesses between 200 and 270 nm, display no segregation of secondary phases, and good dielectric and ferroelectric properties. An increase in remnant polarization is observed when the Ag-NPs are distributed over the volume, which is ascribed to the modification of the film texture. The incorporation of Ag-NPs into the PZT matrix produces an enhancement of the photocurrent density under UV illumination of ∼30%.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Fluorescent graphene quantum dots-enhanced machine learning for the accurate detection and quantification of Hg2+ and Fe3+ in real water samples

  • Llaver, Mauricio
  • Barrionuevo, Santiago D.
  • Núñez, Jorge M.
  • Chapana, Agostina L.
  • Wuilloud, Rodolfo G.
  • Aguirre, Myriam H.
  • Ibáñez, Francisco J.
Selective, accurate, fast detection with minimal usage of instrumentation has become paramount nowadays in the areas of environmental monitoring. Herein, we chemically modified fluorescent graphene quantum dots (GQDs) and trained a machine learning (ML) algorithm for the selective quantification of Hg2+ and Fe3+ ions present in real water samples. The probe is obtained via the electrosynthesis of CVD graphene in the presence of urea, followed by functionalization with 1-nitroso-2-naphthol (NN). The functionalization with NN moieties dramatically improves the selectivity and sensitivity of the probe toward Hg2+ and Fe3+, as demonstrated by LODs of 0.001 and 0.003 mg L−1, respectively. Simulations performed by time-dependent density functional theory (TD-DFT) reveals that the NN molecules within the GQDs are responsible for the florescence emission of the probe. The emission spectra profiles exhibited distinct characteristics between Hg2+ and Fe3+, enabling the ML model to precisely quantify and differentiate between both analytes present in natural and drinking waters. The ML results were further validated by measurements via cold vapor-atomic fluorescence spectroscopy and UV–vis spectroscopy. Our work demonstrates how chemical modification of GQDs, guided by an efficient ML model, markedly enhances sensitivity and selectivity in detecting harmful ions while critically reducing experiments and instrument handling.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Charge-to-spin conversion in epitaxial and polycrystalline Bi and Bi/Ag layers

  • Nasr, Federica
  • Karadža, Emir
  • Alvarado, Santos F.
  • Binda, Federico
  • Goldenberger, Tobias
  • Zucchetti, Carlo
  • Aguirre, Myriam H.
  • Moras, Paolo
  • Matetskiy, Andrey V.
  • Sheverdyaeva, Polina M.
  • Noël, Paul
  • Gambardella, Pietro
Bi is predicted to be an efficient generator of spin–orbit torques (SOTs), with charge-to-spin conversion efficiency comparable to those of prototypical heavy metals, such as Ta, W, and Pt. However, experimental reports provide widely scattered interconversion efficiencies, while the origin of the large conversion signal in Bi/Ag bilayers remains controversial. Here, we investigate charge-to-spin conversion in epitaxial and polycrystalline Bi-based magnetic heterostructures by measuring the damping-like SOT using magneto-optic Kerr effect magnetometry, complemented by structural and spectroscopic analyses and comparison with harmonic Hall resistance measurements. We show that inserting an Ag spacer between Bi(001) and metallic ferromagnets (FeCo or Ni) enhances the SOT efficiency by more than one order of magnitude, reaching an effective spin Hall conductivity of approximately 2×105⁢(ℏ/2⁢)⁢S/m, in excellent agreement with theoretical expectations for bulk Bi. This enhancement can be consistently explained by the preservation of the structural and chemical integrity of Bi—otherwise compromised by the direct deposition of a ferromagnetic overlayer—rather than by Rashba spin–orbit coupling at the Bi/Ag interface. We show that Ag forms an atomically sharp, chemically inert interface with Bi that, unlike other metallic spacers such as Al and Cu, prevents interdiffusion and solid-state dewetting while enabling efficient charge-to-spin conversion. Angle-resolved photoemission spectroscopy reveals no measurable enhancement of the Rashba spin splitting at the Bi(001) surface upon Ag deposition. Comparative studies across epitaxial, polycrystalline, and intentionally surface-oxidized Bi films, beyond oxygen doses known to destroy Bi(001) surface states, reveal that structural disorder has a negative impact on the SOT efficiency. Meanwhile, the retention of 72% of the SOT efficiency following oxygen exposure indicates a dominant bulk contribution to spin-current generation in Bi/Ag heterostructures, yielding an effective Bi spin Hall angle of approximately 1. By establishing a direct correlation between atomic-scale integrity and charge-to-spin conversion, this study provides design principles to improve the reliability of Bi-based SOT devices and offers a robust framework for interpreting spin–charge interconversion in Bi and Bi/Ag systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhanced photocurrent response in epitaxial multiferroic 0.5PZT–0.5PFN thin films

  • Imhoff, Lucía
  • Rengifo, Miguel A.
  • Caicedo Roque, José M.
  • Padilla-Pantoja, Jessica
  • Santiso, José
  • Stachiotti, Marcelo G.
  • Aguirre, Myriam H.
The exploration of novel multiferroic materials with strong coupling between ferroelectric polarization and photovoltaic effects is crucial for next-generation optoelectronic devices. In this study, we characterized highly oriented – multiferroic thin films grown by pulsed laser deposition on (001) substrates with a bottom electrode. The films exhibited excellent crystalline quality, with a single perovskite phase and (001) orientation. They displayed good ferroelectric properties (remanent polarization , PUND; coercive field ), alongside weak ferromagnetic behavior at room temperature (remanence 1.30 ; coercive field 90 ). Photovoltaic measurements demonstrated a robust, polarization-dependent photoresponse under 403 nm monochromatic laser illumination, achieving values between A cm. This compelling observation confirms the intrinsic coupling between ferroelectric polarization and photovoltaic effects, highlighting the considerable promise of these single-phase multiferroic thin films for advanced photovoltaic and optoelectronic memory applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Antisite Defects and Chemical Expansion in Low-damping, High-magnetization Yttrium Iron Garnet Films

  • Santiso, José|||0000-0003-4274-2101
  • García, Carlos
  • Romanque, Cristian
  • Henry, Loïc
  • Bernier, Nicolas
  • Bagués, Núria|||0000-0002-9360-0915
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Valvidares, Manuel|||0000-0003-4895-8114
  • Sandiumenge Ortiz, Felip|||0000-0003-1336-1529
Yttrium iron garnet is widely investigated for its suitability in applications ranging from magneto-optical and microwave devices to magnonics. However, in the few-nanometer thickness range, epitaxial films exhibit a strong variability in magnetic behavior that hinders their implementation in technological devices. Here, direct visualization and spectroscopy of the atomic structure of a nominally stoichiometric thin film, exhibiting a small damping factor of 3.0 ⋅ 10, reveals the occurrence of Y-excess octahedral antisite defects. The two-magnon strength is very small, Γ≈10 Oe, indicating a very low occurrence of scattering centers. Notably, the saturation magnetization, 4πM=2.10 (±0.01) kOe, is higher than the bulk value, in consistency with the suppression of magnetic moment in the minority octahedral sublattice by the observed antisite defects. Analysis of elemental concentration profiles across the substrate-film interface suggests that the Y-excess is originated from unbalanced cationic interdiffusion during the early growth stages.