Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 59
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of Reconfigurable High-Frequency Devices Using Liquid Crystal in Substrate-Integrated Gap Waveguide Technology

  • Voronov, Aleksandr Andreyevich|||0009-0008-4508-4400
  • Bachiller Martin, Maria Carmen|||0000-0002-5518-5060
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Villacampa, Belén
[EN] This article presents the theoretical study, numerical simulation and fabrication of a phase shifter and a stub resonator for use in microstrip ridge gap waveguide (MRGW) technology, using a liquid crystal (LC) in the substrate as a reconfigurable material. The phase shifter and the stub resonator are filled with LC, and thanks to the LC's dielectric anisotropy properties, the phase shift and the resonance response can be easily controlled using an external electric or magnetic bias field. The phase shifter was designed to operate in the range of 10 to 20 GHz, and the resonator was designed to operate in the range of 7.8 to 8.8 GHz. The phase shifter's responses (including both phase shift and insertion losses), associated with both the parallel and perpendicular permittivity values of the LC, were computed and measured, and then the corresponding figure of merit (FoM) was extracted. The resonator's frequency responses, associated with both the LC's parallel and perpendicular permittivity, were computed. The resonator's frequency responses, which provided different polarization voltages, were measured and compared to the simulation results. All technological issues related to both prototypes are also discussed here. The good agreement between the simulation and measurement results confirm this technology as a viable approach to the practical implementation of these microwave reconfigurable devices., This work has been supported by Ministerio de Ciencia, Innovacion y Universidades (Spanish Government) through the R&D Projects PID2022-136590OB-C41 (under grant AEI/10.13039/501100011033/FEDER, UE) and TED2021-129196B-C41 (under grant 10.13039/501100011033/Union Europea NextGenerationEU/PRTR). The authors thank the financial support from Gobierno de Aragon-Fondo Social Europeo (E47-23R) and from Universidad de Zaragoza (UZ2023-CIE-01).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Highly Efficient Photoninitiators Based on 4H-Pyranylidene Derivatives for Two-Photon Laser Printing

  • Royo, Raquel
  • Mainik, Philipp
  • Benitez-Martin, Carlos
  • Andreu, Raquel
  • Blasco, Eva
  • Najera, Francisco
  • Villacampa, Belén
A series of four donor–acceptor–donor derivatives bearing 4H-pyranylidene and 4-methylcyclohexan-1-one units as donor and acceptor groups respectively is designed, synthesized, and photophysically characterized. Both experimental and theoretical studies reveal good two-photon absorption (2PA) properties for these systems. Decoration of the exocyclic position of the 4H-pyranylidene moiety with a thiophene ring results in high 2PA cross-section values (σ2PA) ≈700 nm, and remarkably, in the region between 900 and 1000 nm. Furthermore, all chromophores are evaluated as photoinitiators (PIs) for two-photon-laser printing at 780 nm, showing superior performance compared to the commonly used commercially available PI, phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide. Among the studied PIs, the ones equipped with a thiophene unit at the exocyclic position of the 4H-pyranylidene moiety exhibit the highest efficiency, enabling fast printing using low laser powers with even lower concentrations of PI. Overall, this study shows the great potential of this new class of PIs for application in the field of 3D nanoprinting.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Novel spiro-core dopant-free hole transporting material for planar inverted Perovskite solar cells

  • Royo, Raquel
  • Sánchez, José G.
  • Li, Wenhui
  • Martinez-Ferrero, Eugenia
  • Palomares, Emilio
  • Andreu, Raquel
  • Franco, Santiago
Hole-transporting materials (HTMs) have demonstrated their crucial role in promoting charge extraction, interface recombination, and device stability in perovskite solar cells (PSCs). Herein, we present the synthesis of a novel dopant-free spiro-type fluorine core-based HTM with four ethoxytriisopropylsilane groups (Syl-SC) for inverted planar perovskite solar cells (iPSCs). The thickness of the Syl-SC influences the performance of iPSCs. The best-performing iPSC is achieved with a 0.8 mg/mL Syl-SC solution (ca. 15 nm thick) and exhibits a power conversion efficiency (PCE) of 15.77%, with Jsc = 20.00 mA/cm2, Voc = 1.006 V, and FF = 80.10%. As compared to devices based on PEDOT:PSS, the iPSCs based on Syl-SC exhibit a higher Voc, leading to a higher PCE. Additionally, it has been found that Syl-SC can more effectively suppress charge interfacial recombination in comparison to PEDOT:PSS, which results in an improvement in fill factor. Therefore, Syl-SC, a facilely processed and efficient hole-transporting material, presents a promising cost-effective alternative for inverted perovskite solar cells.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Modelling TiO2 photoanodes for PEC water splitting: Decoupling the influence of intrinsic material properties and film thickness

  • Ansón-Casaos, A.
  • Ciria, J.C.
  • Martínez Barón, C.
  • Villacampa, B.
  • Benito, A.M.
  • Maser, W.K.
Semiconductor metal oxides are intensively studied in electrodes for photoelectrochemical (PEC) water splitting. On a series of nanoparticulate TiO2 photoanodes, we analyze specific fabrication variables by means of data fitting. First, the experimental outcome is gathered using PEC characterization techniques, mostly cyclic voltammetry and transient photocurrent measurements. Subsequently, we apply models to gain insights into the involved charge trapping and transfer phenomena. We find that capacitance coefficients and the switch-on transient kinetics depend on the TiO2 layer thickness, respectively indicating surface mechanisms and stationary regimes that are mediated by light accessibility. On the contrary, exponential factors of capacitance are independent of thickness, but reflect changes in the density of electron states with different sintering atmospheres. Also, the transfer resistance in the electrolyte side is indirectly influenced by sintering. Through meticulous quantitative analysis of trends, we stablish simple mathematical relationships that connect thickness-dependent parameters. This knowledge delves into fundamental mechanisms governing the TiO2 photoelectrode behaviour, and aims to facilitate further improvements in the efficiency of materials and electrodes for green hydrogen production.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Liquid Crystal Emulsions: A Versatile Platform for Photonics, Sensing, and Active Matter

  • Concellón, Alberto
The self‐assembly of liquid crystals (LCs) is a fascinating method for controlling the organization of discrete molecules into nanostructured functional materials. Although LCs are traditionally processed in thin films, their confinement within micrometre‐sized droplets has recently revealed new properties and functions, paving the way for next‐generation soft responsive materials. These recent findings have unlocked a wealth of unprecedented applications in photonics (e.g. reflectors, lasing materials), sensing (e.g. biomolecule and pathogen detection), soft robotics (e.g. micropumps, artificial muscles), and beyond. This Minireview focuses on recent developments in LC emulsion designs and highlights a variety of novel potential applications. Perspectives on the opportunities and new directions for implementing LC emulsions in future innovative technologies are also provided.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ionic self-assembly of pillar[5]arenes: proton-conductive liquid crystals and aqueous nanoobjects with encapsulation properties

  • Marín, Iván
  • Merino, Rosa I.
  • Barberá, Joaquín
  • Concellón, Alberto
  • Serrano, José L.
Liquid crystal (LC) pillar[n]arenes have been barely explored due to their time-consuming and complicated synthesis, despite their promising properties for metal-ion separation, drug delivery, or surface functionalization. Herein, we report an easy and reliable method to functionalize pillar[n]arene macrocycles through electrostatic interactions. These ionic materials were prepared by ionically functionalizing a pillar[n]arene containing ten amine terminal groups with six different carboxylic acids. This supramolecular approach results in ionic pillar[n]arenes which self-organize into LC phases with good proton-conducting properties. Moreover, ionic functionalization provides a new amphiphilic character to the pillar[n]arenes, which self-assemble in water to produce a variety of nanoobjects (i.e., spherical or cylindrical micelles, vesicles, solid nanospheres, or nanotubes) that are capable of encapsulating a model hydrophobic drug. Interestingly, the presence of coumarin moieties in the chemical structure of the ionic pillar[n]arenes results in self-organized materials with light-responsive properties due to the ability of coumarins to undergo photo-induced [2+2] cycloaddition. In particular, we demonstrate that coumarin pohotodimerization can be employed to fabricate mechanically stable proton-conductive LC materials, as well as to obtain photo-responsive nanocarriers with light-induced release of encapsulated molecules.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Bent-core liquid crystals joining the ethylene-oxide/lithium ion tandem: Ionic conductivity and dielectric response towards new electrolytes for energy applications

  • Martínez-Felipe, Alfonso
  • Zaton, Daniel
  • Castillo-Vallés, Martín
  • Baldini, Asia
  • Pease, Jonathan
  • Leader, Natalie
  • Kamalul Aripin, Nurul Fadhilah
  • Giacinti-Baschetti, Marco
  • Ros, M. Blanca
We report the dielectric and conductivity response of three materials containing bent-core and tetra(ethylene-oxide) moieties, and their complexes doped with lithium triflate salts, as new potential nanostructured electrolytes. Whilst the pristine bent-core compounds do not show mesomorphism, the doped materials display smectic mesophases inside indium tin oxide cells assisted by the selective solvation of the lithium ions in the ethylene-oxide blocks. The dielectric response of the materials in the high-frequency range is controlled by the chemical composition of the bent-core structure, and the presence of lithium ions promotes direct current conductivity at low frequencies, in the σdc ∼ 10-5 S cm−1 range, which can be enhanced to σdc ∼ 10-4 S cm−1 via trans-to-cis photoisomerization of azobenzene groups. The dynamic and dual character of these materials (responding to low and high frequency electrical fields), the formation of ferroelectric crystals capable to store energy, and their interactions with light, will be applied to develop new energy devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Liquid-crystalline pillar[5]arene-based [2]rotaxanes

  • Pieper, Pauline
  • Chadi, Yassine
  • Nierengarten, Iwona
  • Hahn, Uwe
  • Meichsner, Eric
  • Nguyen, Thi Le Anh
  • Barberá, Joaquín
  • Deschenaux, Robert
  • Nierengarten, Jean-François
Liquid-crystalline mechanically interlocked molecules have been prepared from a clickable pillar[5]arene-containing [2]rotaxane building block incorporating ethynylated stoppers and dendritic mesogenic subunits of generation 0, 1 and 2 under copper-catalysed alkyne-azide cycloaddition conditions. The liquid-crystalline properties of the resulting pillar[5]arene-based rotaxanes bearing 4, 8 and 16 peripheral cyanobiphenyl units have been investigated and compared to those of corresponding model compounds lacking the macrocyclic component.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hydantoin hexameric rosettes: harnessing H-bonds for supergelation and liquid crystals

  • González, Lucía
  • Marín, Iván
  • Tejedor, Rosa M.
  • Barberá, Joaquín
  • Romero, Pilar
  • Concellón, Alberto
  • Uriel, Santiago
  • Serrano, José L.
We have synthesized two geometric isomers of a cyclohexane-5-spirohydantoin derivative (1,3-diazaspiro[4.5]decane-2,4-dione) incorporating a hydrophobic phenyl 3,4,5-tris(dodecyloxy)benzoate unit at position 8. Separation of these diastereomers was accomplished through silica gel flash chromatography. The interplay of intermolecular hydrogen bonding and micro-segregation between the polar hydantoin unit and nonpolar aliphatic chains within the molecule endows them with remarkable self-assembly capabilities, both in solution and in the solid state. These hydantoin derivatives spontaneously form rosette-shaped structures composed of six molecules. In the solid state, these compounds display hexagonal columnar liquid crystal phases, with hydrogen-bonded disks as their fundamental building blocks. Similarly, when exposed to apolar solvents such as cyclohexane or dodecane, they adopt a columnar arrangement, resulting in gel formation comprising nanoscale fibers that intricately interlace to form a network. Remarkably, the two isomers exhibit markedly different properties. The major isomer behaves as a glassy liquid crystalline material, while the minor one exhibits liquid crystalline behavior with a high propensity to crystallize. Our experimental findings, in combination with theoretical studies, underscore the fundamentally distinct supramolecular organizations present in these isomers, shedding light on their unique self-assembling properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Assessing the influence of small structural modifications in simple DNA-based nanostructures on their role as drug nanocarriers

  • Postigo, Alejandro
  • Martínez-Vicente, Pablo
  • Baumann, Kevin N.
  • Barrio, Jesús del
  • Hernández-Ainsa, Silvia
DNA nanotechnology leverages Watson–Crick–Franklin base-pairing interactions to build complex DNA-based nanostructures (DNS). Due to DNA specific self-assembly properties, DNS can be designed with a total control of their architecture, which has been demonstrated to have an impact on the overall DNS features. Indeed, structural properties such as the shape, size and flexibility of DNS can influence their biostability as well as their ability to internalise into cells. We present here two series of simple DNS with small and precise variations related to their length or flexibility and study the influence that these structural changes have on their overall properties as drug nanocarriers. Results indicate that shorter and more flexible DNS present higher stability towards nuclease degradation. These structural changes also have a certain effect on their cell internalisation ability and drug release rate. Consequently, drug-loaded DNS cytotoxicity varies according to the design, with lower cell viability values obtained in the DNS exhibiting faster drug release and larger cell interaction rates. In summary, small changes in the structure of simple DNS can have an influence on their overall capabilities as drug nanocarriers. The effects reported here could guide the design of simple DNS for future therapeutic uses.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tailoring the dielectric and ferroelectric response of mixtures containing bent-core liquid crystals through light-irradiation and composition

  • Liebsch, Jasmin
  • Strachan, Rebecca
  • Suthaharan, Sivanujan
  • Dominguez-Candela, Ivan
  • Auria-Soro, Carlota
  • San-Millan, Andres
  • Walker, Rebecca
  • Chilukuri, Bhaskar
  • Ros, M. Blanca
  • Martinez-Felipe, Alfonso
We report the mesomorphic behaviour, dielectric and ferroelectric properties, and computational modelling of binary mixtures containing two bent-core liquid crystals: the so-called NG75-COO (3,4́- Bis[4-(4-n-tetradecyloxybenzoyloxy)benzoyloxy]biphenyl), which forms smectic phases, and IP31- AzB (3,4′ - Bis[4-(4-n-tetradecyloxyphenylazo)benzoyloxy]biphenyl), which forms columnar phases. The phase diagram, assessed by polarised optical microscopy, shows that the binary mixtures retain the mesophase behaviour of the major component, whilst the equimolar mixture displays smectic-type phases. Dielectric and ferroelectric analyses were carried out on samples containing 10%, 50%, and 90% of IP31-AzB (molar %), and we also investigated structure–property correlations by differential functional theory. The NG75-COO/IP31-AzB mixtures undergo strong dielectric and ferroelectric response due to the presence of highly polarisable groups in the bent-core components, particularly at the ester groups. All the mixtures under study exhibit light-responsiveness induced by reversible E-to-Z photoisomerization (trans-to-cis) of the azobenzene group in IP31-AzB, together with an increase in the molecular dipole moment. The potential to tune the phase behaviour of the mixtures, as well as their dielectric and ferroelectric responses, are investigated by light irradiation under different conditions of intensity and temperature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Dynamically reconfigurable complex liquid crystal emulsions

  • Terrel, Almudena
  • Moral, Silvia Del
  • Martínez-Bueno, Alejandro
  • Concellón, Alberto
Complex emulsions, containing liquid crystals (LCs) and immiscible oils such as fluorocarbon or silicone oils, present innovative functionalities in soft materials. These emulsions exhibit dynamic reconfiguration in droplet morphology and internal LC organisation, expanding applications in optics, sensing, and active matter. This review highlights the evolution and potential of LC-containing complex emulsions. Emphasis is placed on emulsions featuring dynamic and reversible morphological transformations and LC reorganisation, underpinning their suitability for tunable micro-lenses, chemical sensing, and biosensing. Nematic LCs within complex emulsions allow for topological defect-driven functionalization, attaching antibodies to induce substantial changes in the LC director field upon interfacial recognition events. This feature may facilitate the development of ultrasensitive chemical and biological sensors. Moreover, cholesteric LCs, through their selective reflection, enable the rapid and sensitive detection of foodborne pathogens. The controlled assembly of magnetic nanoparticles at interfaces illustrates advancements towards magnetic field-responsive and active colloids. Future perspectives include exploiting these properties for intelligent colloidal systems capable of autonomous behaviour, and furthering applications in dynamic photonic devices, high-security identification tags, and responsive lens systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Columnar liquid crystals based on antiaromatic expanded porphyrins

  • Nguyen, Duong D.
  • Labella, Jorge
  • Laforga-Martín, Juan
  • Folcia, César L.
  • Ortega, Josu
  • Torres, Tomás
  • Sierra Travieso, Teresa
  • Sessler, Jonathan L.
Three naphthorosarins, antiaromatic expanded porphyrins bearing different meso substituents (NRos 1–3), designed to self-assemble into columnar liquid crystalline (LC) structures, were synthesized and characterized using polarized optical microscopy (POM), differential scanning calorimetry (DSC), X-ray diffraction (XRD), as well as supporting computational calculations. The substituents were found to play a crucial role in modulating the LC behaviour. Supramolecular columnar liquid crystals (LCs) based on π-conjugated organic molecules are promising candidates for the large-scale fabrication of advanced electronic devices.1 The efficient π–π overlapping in these materials results in intriguing charge-carrier transport properties, where the electrical pathway can be tailored by orienting the assembly using electrical or magnetic fields.2 In this context, porphyrins (Ps) and phthalocyanines (Pcs) have been widely investigated as building blocks since they provide high-added value technological properties, such as strong absorption in the vis-to-NIR spectral range, modulable band-gaps and excellent processability, just to name a few.3 Ps and Pcs are based on four-membered pyrrolic skeletons (Fig. 1). However, unique features emerge when the number of pyrrolic units is reduced or increased, leading to the so-called contracted or expanded porphyrinoids, respectively.4,5
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Discarding metal incorporation in pyrazole macrocycles and the role of the substrate on single-layer assemblies

  • Lobo-Checa, Jorge
  • Rodríguez, Sindy Julieth
  • Hernández-López, Leyre
  • Herrer, Lucía
  • Passeggi, Mario C. G.
  • Cea, Pilar
  • Serrano, José Luis
Pyrazole derivatives are key in crystal engineering and liquid crystal fields and thrive in agriculture, pharmaceutical, or biomedicine industries. Such versatility relies in their supramolecular bond adaptability when forming hydrogen bonds or metal-pyrazole complexes. Interestingly, the precise structure of pyrazole-based macrocycles forming widespread porous structures is still unsolved. We bring insight into such fundamental question by studying the self-assembled structures of a bis-pyrazole derivative sublimed in ultra-high-vacuum conditions (without solvents) onto the three (111) noble metal surfaces. By means of high-resolution scanning tunneling microscopy that is validated by gas phase density functional theory calculations, we find a common hexagonal nanoporous network condensed by triple hydrogen bonds at the molecule–metal interface. Such assembly is disrupted and divergent after annealing: (i) on copper, the molecular integrity is compromised leading to structural chaos, (ii) on silver, an incommensurate new oblique structure requiring molecular deprotonation is found and, (iii) on gold, metal–organic complexes are promoted yielding irregular chain structures. Our findings confirm the critical role of these metals on the different pyrazole nanoporous structure formation, discarding their preference for metal incorporation into the connecting nodes whenever there is no solvent involved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Molecular templates on surfaces by exploiting supramolecular chemistry in Langmuir–Blodgett monolayers

  • Escorihuela, Enrique
  • Concellón, Alberto
  • Cardona, Teresa
  • Zuccheri, Giampaolo
  • Martín, Santiago
  • Serrano, José L.
  • Cea, Pilar
Attaining precise control over molecular arrangements is of paramount importance for numerous applications in nanotechnology, particularly in constructing molecular templates to accurately immobilize target materials on surfaces. A strategic combination of supramolecular and interfacial chemistry may serve to build a well‐organized molecular network, enabling the subsequent location of target molecules on specific positions of a surface. A supramolecular complex (compound 1) comprised of a melamine unit forming hydrogen bonds with dendritic arms terminated in a coumarin unit is utilized, which readily undergoes photodimerization. The research demonstrates the formation of well‐organized Langmuir films of compound 1 which can be transferred on substrates at low surface pressures adopting a lying‐flat orientation. Upon irradiation of the pristine films at 365 nm the coumarin units undergo photo‐cross linking, leading to the formation of a compact photo‐crosslinked film. Incubation of these photo‐crosslinked films in a solution containing 1‐hexanethiol results in the withdrawal of the melamine and the chemisorption of two thiol molecules per each melamine unit. The nanopores created by the removal of the melamine core are attributed to the disruption of hydrogen bonds in compound 1 by the thiols. This precisely defined molecular network holds significant promise as a template for orchestrating the arrangement of functional materials on surfaces.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The CF<sub>3</sub> Group as a Synthon of the CF<sup>+</sup> Unit in Palladium Chemistry

  • Joven-Sancho, Daniel
  • Baya, Miguel
  • Martín, Antonio
  • Orduna, Jesús
  • Menjón, Babil
The homoleptic trifluoromethyl‐palladium(II) complex [Pd(CF3)4]2− (1) is shown to be highly active towards amines. Thus, when treated with primary amines RNH2, it readily undergoes aminolysis of one of the CF3 ligands affording the isocyanide complexes [(CF3)3Pd(CNR)]− (R=aryl). In this process the original CF3 group undergoes total defluorination. Interestingly, the reaction of 1 with secondary amines R2NH proceeds with loss of just two F‐substituents, whereby the Fischer‐type fluoroaminocarbene complexes [(CF3)3Pd(CFNR2)]− are formed (R=Et, Ph). The reaction of 1 with diamines affords different [(CF3)3Pd(NHC)]− complexes containing sterically non‐demanding NHC ligands. Representative examples of various topologies are reported based on the common imidazolidin‐2‐ylidene or benzimidazolin‐2‐ylidene rings as well as the expanded‐ring perimidin‐2‐ylidene. This metal‐tailored synthetic route, where a CF3 group acts as a pre‐carbenic unit, is unprecedented in the vast NHC‐chemistry. It takes place under very mild conditions and is envisaged to be extensible to other non‐isolable NHC ligands. The key difluorocarbene intermediate [(CF3)3Pd(CF2)]− is experimentally detected.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of Hydrogen Bonding and Chirality in Star-Shaped Molecules with Peripheral Triphenylamines: Liquid Crystal Semiconductors and Gels

  • Martínez-Bueno, Alejandro
  • Martín, Santiago
  • Ortega, Josu
  • Folcia, César L.
  • Termine, Roberto
  • Golemme, Attilio
  • Giménez, Raquel
  • Sierra, Teresa
Organic semiconductors with well-defined architectures pose a suitable alternative to amorphous silicon-based inorganic semiconductors. Encouraged by the development of organic semiconductors based on columnar liquid crystals, herein, we report on a family of C3-symmetric star-shaped mesogens based on triphenylamine (TPA), a functional unit with strong electron donor character. Highly stable columnar phases with high hole mobility values were obtained out of this nonplanar functional unit, and this was achieved by using flexible amide spacers to join the TPA units to a tris(triazolyl)triazine (T) star-shaped core, allowing the formation of intermolecular hydrogen bonds. The presence of hydrogen bonds results in a stabilization of the columnar architectures either in bulk or in the presence of solvents by reinforcing π-stacking and van der Waals interactions, as deduced by Fourier-transform infrared (FTIR) and X-ray diffraction (XRD) studies. Furthermore, the introduction of a stereogenic center in the flexible spacer prompts the formation of chiral aggregates in the liquid crystal state and in the organogel formed in 1-octanol, as demonstrated by circular dichroism spectroscopy.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Silver Dendritic Gels with Luminescence and Aggregation-Induced Emission Effect

  • Iguarbe, Verónica
  • Romero, Pilar
  • Elduque, Anabel
  • Giménez, Raquel
This work reports on a novel family of silver metallogels based on discrete coordination complexes. Structurally, they consist of dendrimers containing a trinuclear silver metallacycle at the core, with the general formula [M(μ-pz)]3, and poly(benzyl)ether branched structures with different numbers or terminal alkoxy chains at the periphery. These silver metallodendrimers are able to gel low-polarity solvents such as dodecane or cyclohexane, giving rise to luminescent organogels at room temperature with the property of aggregation-induced emission (AIE). This property means that in solution or the sol state, they are weak emitters, but in the gel state, luminescence is considerably increased. In this particular case, they exhibit blue luminescence. Two different dendritic scaffolds have been studied, finding significant differences in solubility, gel formation and dependence of luminescence on temperature. The results show that properly tailored silver gelators can show luminescence in the gel state.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Towards sustainable TiO2 photoelectrodes based on cellulose nanocrystals as a processing adjuvant

  • Martínez-Barón, C.
  • Calvo, V.
  • Hernández-Ferrer, J.
  • Villacampa, B.
  • Ansón-Casaos, A.
  • González-Domínguez, J. M.
  • Maser, W. K.
  • Benito, A. M.
Photoelectrodes of TiO2 in the form of films are commonly fabricated using screen printing techniques, employing viscous commercial TiO2 pastes. However, these pastes comprise environmentally unfriendly, multicomponent formulations designed to manufacture the photoactive TiO2 nanoparticles. To strive for sustainable processing and pave the way for the use of liquid-phase film processing technologies, the inherent limited water dispersibility of TiO2 nanoparticles must be overcome. In this study, we show that cellulose nanocrystals, produced via an environmentally benign one-pot hydrolysis process, enable the preparation of stable TiO2 water dispersions. The remarkable stability of these dispersions, evidenced by their outstanding ξ-potential values of −34 mV, facilitates the fabrication of macroporous TiO2 photoactive films throughout spray coating. Employed as photoanodes in a photoelectrochemical cell, our TiO2 photoanodes are compared with conventional TiO2 electrodes obtained from commercial pastes under water splitting conditions. Interestingly, our photoanodes reveal a remarkable three-fold enhancement of the photocurrent performance (132 vs. 46 μA cm−2) and a four-fold increase in the on–off response rate (4 vs. 1 s). These findings underscore the valuable role of cellulose nanocrystals as a green processing asset for achieving TiO2 water dispersions. Moreover, they serve as sacrificial adjuvants for preparing highly macroporous and functional film photoelectrodes, representing a significant step forward in the pursuit of sustainable and efficient materials processing.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Chiral ferroelectric nematic liquid crystals as materials for versatile laser devices

  • Folcia, César L.
  • Ortega, Josu
  • Sierra, Teresa
  • Martínez-Bueno, Alejandro
  • Etxebarria, Jesús
We present a liquid-crystal laser device based on the chiral ferroelectric nematic phase (NF*). The laser medium is obtained by mixing a ferroelectric nematic material with a chiral agent and a small proportion of a fluorescent dye. Notably, in the NF* phase very low electric fields perpendicular to the helical axis are able to reorient the molecules, giving rise to a periodic structure whose director profile is not single harmonic but contains the contribution of various Fourier components. This feature induces the appearance of several photonic bandgaps whose spectral ranges depend on the field, which can be exploited to build tunable laser devices. Here we report the characterization of home-made NF* lasers that can be tunable under low electric fields and present laser action in two of the photonic bands of the material. The obtained results open a promising route for the design of new and more versatile liquid-crystal based lasers
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Development of reconfigurable high-frequency devices using liquid crystal in substrate-integrated gap waveguide technology

  • Voronov, Aleksandr Andreyevich
  • Bachiller, Carmen
  • Villacampa, Belén
  • Boria, Vicente E.
This article presents the theoretical study, numerical simulation and fabrication of a phase shifter and a stub resonator for use in microstrip ridge gap waveguide (MRGW) technology, using a liquid crystal (LC) in the substrate as a reconfigurable material. The phase shifter and the stub resonator are filled with LC, and thanks to the LC’s dielectric anisotropy properties, the phase shift and the resonance response can be easily controlled using an external electric or magnetic bias field. The phase shifter was designed to operate in the range of 10 to 20 GHz, and the resonator was designed to operate in the range of 7.8 to 8.8 GHz. The phase shifter’s responses (including both phase shift and insertion losses), associated with both the parallel and perpendicular permittivity values of the LC, were computed and measured, and then the corresponding figure of merit (FoM) was extracted. The resonator’s frequency responses, associated with both the LC’s parallel and perpendicular permittivity, were computed. The resonator’s frequency responses, which provided different polarization voltages, were measured and compared to the simulation results. All technological issues related to both prototypes are also discussed here. The good agreement between the simulation and measurement results confirm this technology as a viable approach to the practical implementation of these microwave reconfigurable devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ionic bent-core pillar[n]arenes: from liquid crystals to nanoaggregates and functional applications

  • Marín, Iván
  • Castillo-Vallés, Martín
  • Merino, Rosa I.
  • Folcia, César L.
  • Barberá, Joaquín
  • Ros, M. Blanca
  • Serrano, José L.
Herein, we report the first examples of supramolecular systems from bent-core-based pillar[n]arenes through ionic bonds. These ionic materials have been prepared by the interaction of an amino-ended pillar[5]arene (P5N10) and three different carboxylic acids, including bent-core moieties. The bent-core units are based on ester, biphenyl, and azobenzene structures bearing two different flexible spacers between the carboxyl group and the central bent-core aromatic units. The ionic pairs segregate the molecular blocks, leading to columnar liquid crystal organizations. These ionic supramolecular compounds exhibit interesting results as proton-conductive materials. Furthermore, the introduction of azobenzene units in the bent-core structure has provided a photoresponse to the proton conduction materials. Interestingly, the amphiphilic character generated by the ionic pairs and the hydrophobic bent-core structures allows their molecular self-assembly in water solution, resulting in aggregates of appealing morphologies. The structural modifications of the bent-core units (i.e., connecting bonds at the lateral structure and spacer lengths) provide an attractive analysis on the relationship between the chemical structure and the morphology of the aggregates (fibers, chiral ribbons, nanotubes...). Additionally, the self-assembly process and evolution of the aggregates from fibers to nanotubes have been studied with several techniques.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Modulating the Conductivity of Light-Responsive Ionic Liquid Crystals

  • Bendaoud, Umama
  • Bhowmik, Pradip K.
  • Chen, Si L.
  • Han, Haesook
  • Cox, Seonghyeok L.
  • Liebsch, Jasmin
  • Ros, M. Blanca
  • Selvi Velayutham, Thamil
  • Aripin, Nurul Fadhilah Kamalul
  • Martinez-Felipe, Alfonso
In this work, we describe the phase behaviour and the dielectric and conductivity response of new light-responsive ionic liquid crystals, ILCs, which can be applied as controllable electrolytes. The materials include two different dicationic viologens, the asymmetric 6BP18 and the symmetric EV2ON(Tf)2, containing bistriflimide as the counterions, mixed with 5% and 50% molar, respectively, of one new photoresponsive mesogen called CNAzO14. These mixtures exhibit liquid crystal behaviour, light responsiveness through the E-Z photoisomerisation of the azobenzene groups in CNAzO14, and strong dielectric responses. The 5%-CNAzO14/Ev2ON(Tf)2 mixture displays direct current conductivities in the 10−7 S·cm−1 range, which can be increased by a two-fold factor upon the irradiation of UV light at 365 nm. Our findings set the grounds for designing new smart ionic soft materials with nanostructures that can be tuned and used for energy conversion and storage applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

DNA-Based Nanocarriers to Sequester Altered microRNAs in Cardiac Dysfunction

  • Postigo, Alejandro
  • Hernández-Bellido, Natalia
  • Sánchez-Barat, Marcos
  • García-Mendívil, Laura
  • Pueyo, Esther
  • del Barrio, Jesús
  • Hernández-Ainsa, Silvia
  • Ordovás, Laura
MicroRNAs (miRs) play a critical role in modulating gene expression across biological processes, including cardiac aging and disease. As such, miRs have demonstrated therapeutic potential in several cardiac conditions. Efficient delivery of miR therapies to cardiac tissue is crucial for effective gene therapy and DNA‐based nanocarriers (DNCs), based on Watson‐Crick‐Franklin highly specific base‐pair recognition, have emerged as a promising, biocompatible alternative to viral‐based methods. Here, DNCs designed to modulate miR levels as a potential treatment for cardiac dysfunction are presented. Specifically, the DNCs target miR‐24‐2, which inhibits SERCA2 gene. In humans, the reduction of SERCA2 activity is a hallmark of heart failure and is altered in cardiac aging. The assembled DNCs bearing anti‐miR‐24‐2‐5p sequences effectively restore intracellular levels of SERCA2 in a HEK293 cell model. The DNCs proper assembly is thoroughly verified, while their stability and miR‐capture ability are demonstrated in vitro. The DNCs exhibit successful internalization into HEK293 and modest uptake into human cardiomyocytes. SERCA2 restoration by DNCs is significantly influenced by the miR‐capture sequence layout, underscoring the importance of precise design for optimal biological outcomes. This study highlights the potential of DNCs in cardiac therapies, a previously unexplored avenue for addressing cardiac dysfunction.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Adhesion of Catechol-Functionalized Linear-Dendritic Block Copolymers: dendritic effect, self-assembly, and bioadhesion

  • Lancelot, Alexandre
  • Meger, Mitchell E.
  • Guerreiro Gómez, Enrique
  • Sierra, Teresa
  • Wilker, Jonathan J.
Inspired by mussels protein adhesives, two series of catechol‐functionalized Linear‐Dendritic Block Copolymer (LDBC) adhesives are synthesized. They show lap shear adhesion strength as high as 7 MPa on aluminum substrates and adhesion up to 3 kPa on porcine skin. These water‐soluble LDBCs are composed of i) either poly(ethylene glycol) (PEG) or poly(ethylene glycol)‐poly(propylene glycol)‐poly(ethylene glycol) triblock copolymer (Pluronic F‐127) as linear polymers, ii) Bis‐MPA dendrons of generation 0, 1, and 2 as dendritic parts, and iii) 2, 4, or 8 terminal catechol moieties. A LDBCs generation comparative test on aluminum reveals a clear dendritic effect: the LDBCs of second generation display higher adhesion than the LDBCs of first generation that also display higher adhesion than the LDBCs of generation 0 for both series, assessing thus a positive dendritic effect in adhesion. Second, a comparative study is carried out between the LDBCs based on PEG and the ones based on Pluronic. The ability of the Pluronic LDBCs to self‐assemble in water appears to reduce adhesion when applied on aluminum whereas it is essential to obtain adhesion on porcine skin, thanks to the formation of hydrogels, as observed by the vial inversion technique and electron microscopy.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Carbon nanomaterials-Based Inks and Electrodes Using Chitin Nanocrystals

  • Calvo, Víctor
  • Martínez-Barón, Carlos
  • Vázquez-Conejo, Benjamín
  • Domínguez-Alfaro, Antonio
  • Paleo, Antonio J.
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González-Domínguez, José M.
Dispersing 1D carbon nanomaterials (CNMs) for film processing traditionally relies on surfactants or organic solvents. These methods, however, raise environmental concerns and can negatively impact the final properties of the CNMs. In this work we demonstrate that chitin nanocrystals (ChNCs) synthesized via acid hydrolysis provide a greener pathway for the development of waterborne CNMs-based inks, including single-walled carbon nanotubes, multiwalled carbon nanotubes, and carbon nanofibers. Various concentrations of ChNCs were mixed with each type of CNM to maximize the CNM concentration within the ink. In-depth characterization of the CNM/ChNC inks preceded their processing into supported conductive films by spray-coating. A subsequent thermal treatment of ChNCs at 450 °C leads to the efficient removal of ChNC and results in a significant enhancement of the electrical conductivity. Moreover, freeing the CNMs network structure contributes to increased electrochemical performance of the treated films, as expressed by improved Faradaic charge transfer efficiencies and kinetics reflected by 1 order of magnitude reduced rate constants, when tested with various redox probes. Our findings highlight the potential of ChNCs as a sustainable processing adjuvant of CNMs, leading to electrically conductive electrodes with suitable electrochemical properties for their use in diverse devices and applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

4D Printing of Liquid Crystal Emulsions for Smart Structures with Multiple Functionalities

  • Concellón, Alberto
  • Mainik, Philipp
  • Vazquez-Martel, Clara
  • Álvarez-Solana, Cristina
  • Blasco, Eva
3D printing, and more recently 4D printing, has emerged as a transformative technology for fabricating structures with complex geometries and responsive properties. However, employing functional colloidal solutions as inks for printing remains unexplored. In this work, we present a novel and versatile 4D printing approach for fabricating functional and complex‐shaped objects using polymerizable liquid crystal (LC) emulsion droplets. Leveraging a digital light processing (DLP) 3D printing technique, we achieve rapid production of intricate 3D geometries with high resolution. The printed structures retain the LC ordering from the precursor droplets, imparting the final objects with shape memory properties, including shape fixation and recovery upon heating or light exposure. Light‐responsive behavior is introduced post‐printing by embedding an azo dye into the 3D structures. Additionally, we explore the potential to create intrinsically porous 3D structures by selectively removing non‐reactive components from the printed geometries, adding an extra level of functionality to the printed objects. Furthermore, we incorporate chiral nematic LCs into the emulsion droplets, producing 3D objects with tunable reflective properties. To our knowledge, this is the first example of DLP 3D printing with emulsions, offering an effective and versatile pathway for developing 4D‐printed materials with potential applications in optics, robotics, microfluidics, and biomedicine.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Disrupting J-Aggregation in Triazatruxene Dimers to Develop Responsive Luminescent Inks for Anti-Counterfeiting Applications

  • Martín, Raúl
  • Echeverri, Marcelo
  • González, Francisco
  • de Andrés, Alicia
  • Ruiz Delgado, M. Carmen
  • Concellón, Alberto
  • Serrano, José Luis
  • Gómez-Lor, Berta
The fight against counterfeiting is a crucial concern for economies around the world, underscoring the urgent need for effective measures to ensure the legitimacy of products and documents. Luminescent security inks have emerged as effective tools in this battle. The third generation of these inks, incorporating stimuli‐responsive organic materials, enables unique efficiency. In this work, the stimuli‐responsive behavior of three trialkylated triazatruxene dimers (TRI1, TRI2, and TRI3), endowed with N‐alkyl chains of different length is investigated. Among them, TRI3, with three flexible dodecyl chains, shows remarkable stimuli‐responsive fluorescence that is attributed to thermally or shear‐induced phase transitions between a tetragonal columnar phase and a discotic‐nematic liquid crystal phase. Such transformation involves the breakdown of highly emissive J‐aggregates with a strong influence on the resulting emissive color. Interestingly, these stimuli‐triggered transformations are spontaneously reversed, which renders this compound very interesting in the search of third‐generation security inks.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Amino-yne reaction for the synthesis of degradable hydrogels: Study of the cleavage of ß-Aminoacrylate Cross-Links

  • Bescós-Ramo, Sara
  • Barrio Lasheras, Jesús del
  • Romero, Pilar
  • Florentino-Madiedo, Laura
  • Piñol, Milagros
  • Oriol, Luis
This work addresses a study of PEG-derived hydrogels based on β-aminoacrylate cross-links and obtained by amino-yne click chemistry, using a β-aminoacrylate-based model molecule as reference. The pH-triggered cleavage of the β-aminoacrylate bonds was monitored confirming not only the release of the conjugated amine but also the formation of a mixture of chemical species that depends on the acidity of the medium. Moreover, overall hydrogel degradation rates were able to be adjusted by modifying pH, temperature, polymer concentration, or the amine selected as linker of PEG chains. In particular, the labile nature of the β-aminoacrylate bond was confirmed even under physiological conditions (pH 7.4, 37 °C), leading to long-term material degradation. The release and recovery of the conjugated amine after the cleavage of the β-aminoacrylate bonds was demonstrated at both acidic and physiological pH, mimicking the results acquired through model molecule studies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hybrids of Deep HOMO Organic Cyanoacrylic Acid Dyes and Graphene Nanomaterials for Water Splitting Photoanodes

  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Orduna, Jesús
  • Villacampa, Belén
  • Blesa, María-Jesús
Dye-sensitization is a promising strategy to improve the light absorption and photoactivity abilities of wide-bandgap semiconductors, like TiO2. For effective water-splitting photoanodes with no sacrificial agents, the electrochemical potential of the dye must exceed the thermodynamic threshold needed for the oxygen evolution reaction. This study investigates two promising organic cyanoacrylic dyes, designed to meet that criterion by means of theoretical calculations. Both yellow-colored dyes were synthesized and characterized by optical and photoelectrochemical techniques, demonstrating strong light absorption in the visible region, suitable experimental reduction potentials, and adsorption from the organic solvent onto mesoporous TiO2 layers. In addition, to promote immobilization in aqueous electrolytes, the dyes were hybridized with graphene oxide or multi-walled carbon nanotubes. Photoelectrochemical analysis of the dye-sensitized photoelectrodes demonstrated efficient charge transfer from the dyes to the TiO2 photoanode under simulated solar light. While the starting photocurrent notably surpassed the blank TiO2, a subsequent decay points to kinetic obstacles that still need to be overcome.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

Folding and Functionalizing DNA Origami: A Versatile Approach Using a Reactive Polyamine

  • Postigo, Alejandro
  • Marcuello, Carlos
  • Verstraeten, William
  • Sarasa, Santiago
  • Walther, Tobias
  • Lostao, Anabel
  • Göpfrich, Kerstin
  • Barrio, Jesús del
  • Hernández-Ainsa, Silvia
DNA nanotechnology is a powerful synthetic approach to crafting diverse nanostructures through self-assembly. Chemical decoration of such nanostructures is often required to tailor their properties for specific applications. In this Letter, we introduce a pioneering method to direct the assembly and enable the functionalization of DNA nanostructures using an azide-bearing functional polyamine. We first demonstrate the successful polyamine-assisted folding of a scaffolded DNA origami nanostructure equipped with reactive azide groups. Leveraging this reactivity, we next showcase the decoration of the DNA origami via strain-promoted azide–alkyne cycloaddition with dibenzocyclooctyne-containing functional molecules. Specifically, we incorporate a fluorophore (Cy5), polyethylene glycol (PEG), and a hydrophobic phosphatidylethanolamine (PE) tag to tailor the properties of our DNA origami nanostructures. Our approach is expected to streamline and reduce the cost of chemical customization of intricate DNA nanostructures, paving the way for enhanced versatility and applicability.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Degradable Ureido‐Polycarbonate Block Copolymers with a Complex UCST Thermoresponse

  • Martín-Martín, Javier
  • Abad, Miriam
  • López de Pariza, Xabier
  • Ezquerra, Tiberio A.
  • Nogales, Aurora
  • Sardón, Haritz
  • Sebastián, Víctor
  • Oriol, Luis
  • Piñol, Milagros
In this work, amphiphilic block copolymers (BCs) consisting of a hydrophilic poly(ethylene glycol) methyl ether (PEG) and a degradable polycarbonate block derived from 2,2‐bis(hydroxymethyl)propionic acid (bis‐MPA) with pendant ureido units, along with corresponding homopolycarbonates are described. Polymers are synthesized by combining ring opening polymerization (ROP) and thiol‐ene/yne functionalization to incorporate UCST‐promoting ureido groups. For homopolycarbonates, increasing the ureido groups density along the polymer chain facilitates the upper critical solution temperature (UCST)‐type thermoresponse in water. Because of their amphiphilic character, BCs form stable self‐assemblies either by direct dispersion in water, co‐solvent method or microfluidics. Upon heating, these self‐assemblies swell, and collapse due to extensive hydration of the polycarbonate block, rather than becoming solubilized. Thermoresponsiveness is analyzed in terms of the number of ureido groups in the polycarbonate for a given polycarbonate block length as well as the length of polycarbonate block. As a proof of concept, the potential of these self‐assemblies as thermoresponsive drug nanocarriers is evaluated, using curcumin as a hydrophobic model drug.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tuning the liquid crystal behavior of subphthalocyanines: effects of substitution, chirality, and hydrogen bonding

  • Labella, Jorge
  • López-Serrano, Elisa
  • Labrador-Santiago, Jorge
  • Barberá, Joaquín
  • Folcia, César L.
  • Sierra, Teresa
  • Torres, Tomás
Bowl-shaped aromatics that self-assemble into columnar liquid crystals (LCs) are key components for developing polarized semiconductors. However, progress in this field has been sluggish, as the limited set of available π-conjugated curved scaffolds has left structure–property relationships poorly understood. Herein the role that substitution pattern, substituent nature, and chirality play in the LC columnar organization of subphthalocyanines (SubPcs) is explored. Remarkably, it is revealed that enantiopure SubPcs exhibit a reduced tendency to form LC phases compared to their racemic counterparts, whereas higher substitution density increases flexibility within the columns, compromising coaxial alignment. Moreover, we find that the use of conformationally flexible, π-extended peripheral substituents enables efficient π–π stacking, and that the incorporation of hydrogen-bonding amide groups leads to highly stable mesophases with elevated melting points, although the mesophase remains at room temperature after thermal treatment. These trends are further rationalized through theoretical modeling. Overall, this work provides valuable synthetic and design guidelines for advancing bowl-shaped aromatics toward next-generation functional columnar liquid crystals.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Catechol-substituted siderophore colistin exhibits superior antimicrobial activity than its unmodified polypeptide counterpart

  • Bescós-Ramo, Sara
  • Gámez, Enrique
  • Encabo-Berzosa, María del Mar
  • Piñol, Milagros
  • Oriol, Luis
  • Arruebo, Manuel
Catechol moieties have been covalently coupled to the last-resort polypeptide antibiotic colistin via esterification and amidation reactions, inspired by the superior antimicrobial action of cefiderocol, i.e., a catechol-substituted siderophore cephalosporin. Among the tested strategies, the incorporation of the catechol motif by amidation reduces by 50% the minimum concentration to inhibit the growth of a clinical strain of uropathogenic Escherichia coli (E. coli) in its planktonic form. Its minimum bactericidal concentration is reduced by 25% after chemical modification. The tested modified antibiotic did not show cytotoxicity against human fibroblasts and keratinocytes at bactericidal doses. Additionally, due to the potential nephrotoxicity of colistin, the cytotoxicity of this catechol-substituted siderophore colistin was evaluated in a 3D model of human renal organoids showing no cytotoxicity at the doses tested. The chemical incorporation of catechol groups to existing antibiotics can reduce the doses to exert a fast antimicrobial action reducing the chances to develop antibiotic resistance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Halogen-bonded ionic liquid crystals: supramolecular organization and ionic transport

  • Marcos, Mercedes
  • Concellón, Alberto
  • Terrel, Almudena
  • Merino, Rosa I.
  • Tejedor, Rosa M.
  • Barberá, Joaquín
  • Serrano, José L.
  • Uriel, Santiago
Ionic liquid crystals (ILCs) are emerging materials that combine the anisotropic self-assembly of liquid crystals with the ionic conductivity of ionic liquids, making them promising candidates for electrochemical applications such as ion-conducting membranes and next-generation electrolytes. In this work, we report the synthesis and characterization of a series of 1-alkyl-3-halopyridinium halides, where both the cationic and anionic components participate in halogen bonding, leading to enhanced mesophase stability and well-defined ionic nanochannels. Compounds with alkyl chains of 12 carbons or longer exhibit Smectic A liquid crystalline phases, with their stability increasing with chain length and halogen bond strength. X-ray diffraction analysis confirms the role of halogen bonding in driving molecular self-assembly and charge segregation, key factors in mesophase formation. Ionic conductivity measurements demonstrate that these ILCs facilitate ion transport through their nanosegregated ionic domains, with conductivities comparable to other liquid crystalline electrolytes. These findings highlight the potential of halogen-bonded ILCs as functional materials for electrochemical devices, providing a tunable platform for the development of advanced ion-conducting materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Reversible Phase Transitions of Anionic and Cationic Surfactant Mixtures Drive Shape Morphing Droplets

  • Frank, Bradley D.
  • Romero, Pilar
  • Concellón, Alberto
  • Zeininger, Lukas
Converting chemical signals into mechanical responses is fundamental to biological systems, driving processes such as cellular motility and tissue morphogenesis. Yet, harnessing chemo‐mechanical signal conversions in synthetic systems remains a key challenge in energy‐dissipative materials design. While droplets can move and interact with their environment reminiscent of active biological matter, chemo‐mechanical interactions are limited by the translation of chemical changes into extensive force variations required on small timescales. Droplets naturally adopt spherical shapes to minimize surface‐energy and restructuring liquids into non‐equilibrium geometries requires mechanisms beyond current stimuli‐responsive surfactant systems, which lack the force‐amplifying mechanisms needed for transient liquid structuring. Here, a spring‐like charging and latch‐controlled release mechanism is introduced for actuating droplets. This is based on reversible, light‐induced crystal‐to‐coacervate phase transitions of photo‐responsive surfactant assemblies, namely between anionic sodium dodecylsulfate and cationic azobenzene‐based surfactants. During phase‐transition, reversible partitioning of the surfactants into the oil or aqueous phases of the emulsion transiently induce rapid changes in interfacial tensions, which are up to 900 times greater than those observed for conventional stimuli‐responsive surfactant systems. The insights into this novel chemo‐mechanical transduction mechanism provide new control over purely liquid systems, paving the way for programmable, hierarchically structured, all‐liquid matter acting with physicality.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Serum-Based Detection of Pancreatic and Ovarian Cancer via a Nanoparticle-Enhanced Fluorescence Array and Machine Learning

  • Morcuende-Ventura, Violeta
  • Sánchez-Gracia, Oscar
  • Abian-Franco, Natalia
  • Jiménez-Pardo, Isabel
  • Herrer, Lucía
  • Castillo-Vallés, Martín
  • Lancelot, Alexandre
  • Falcó-Martí, F. Javier
  • Hermoso-Durán, Sonia
  • Pazo-Cid, Roberto
  • Lanas, Ángel
  • Velazquez-Campoy, Adrián
  • Sierra, Teresa
  • Abian, Olga
Early detection of oncological diseases such as pancreatic ductal adenocarcinoma (PDAC) and ovarian cancer (OV) is pivotal for successful treatment but remains a significant challenge due to the lack of sensitive and specific diagnostic tests. Fluorescence spectroscopy, enhanced by the interaction of serum proteins with nanoparticles (NPs) based on linear–dendritic block copolymers, has emerged as a promising technique for the noninvasive detection of these malignancies. This study introduces a novel array-based assay methodology to evaluate the diagnostic capabilities of various NPs within serum samples using fluorescence. Methods: We synthesized three types of NPs (1-SH, 2-OH, 3-NH3+) and analyzed their fluorescence spectra in serum samples from patients with PDAC, OV, and control subjects. The samples were excited at 330 and 350 nm wavelengths to obtain their fluorescence emission spectra. An array of machine learning algorithms was applied, including boosting and tree-based methods, to assess the ability of the spectral data to discriminate between pathological and nonpathological states. The algorithms’ performance was measured by the area under the receiver operating characteristic curves (AUC). Results: The fluorescence spectra revealed distinct patterns for PDAC and OV pathologies. 3-NH3+ NPs exhibited the highest differential capacity with AUCs exceeding 80% for PDAC across all algorithms, except one. 2-OH NPs showed a strong discriminatory ability for OV with AUCs over 70%, utilizing all but one of the algorithms. 1-SH NPs, however, did not significantly increase differentiability. Boosting algorithms generally outperformed other methods, indicating their suitability for this diagnostic approach. Conclusions: The proposed assay array methodology enables the systematic evaluation of NPs’ diagnostic potential using fluorescence spectroscopy. The differential interactions between NPs and serum proteins specific to PDAC and OV highlight the method’s capability to discern pathological states. These findings suggest a path forward for developing NP-assisted fluorescence spectroscopy as a viable tool for cancer diagnostics, potentially leading to earlier detection and improved patient outcomes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High second harmonic generation in ferroelectric nematic liquid crystals by doping with optimally oriented chromophores

  • Ortega, Josu
  • Folcia, César Luis
  • Sierra, Teresa
We report on the second harmonic generation performance of a ferroelectric nematic fluid consisting of the prototype ferroelectric nematic liquid crystal, RM734 mixed with the classical chromophore Dispersed-Orange 3 at 5 wt%. The mixture exhibits an interesting mesomorphic behaviour with a wide temperature range of the ferroelectric mesophase, high nematic order parameter and ease of alignment in cells. In the study, two fundamental wavelengths (1064 nm and 1574 nm) have been used in order to account for the second harmonic generation performance in absorbing and transparent regimens for the second harmonic light. For the fundamental wave the material is transparent in both cases. The results have been very outstanding and are among the highest for liquid crystals so far. Specifically, second order susceptibility tensor components of up to 25 pmV−1 and 8.5 pmV−1 have been obtained in the absorbing and transparent regimens, respectively. The mixing of chromophores with ferroelectric nematic liquid crystals is then established as a promising strategy in the search of high-performance nonlinear-optical mesogens.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

Shaping Liquid Crystal Polymer Networks: From Molecular Design and Processing to Multifunctional Materials

  • Abad, Miriam
  • Martínez-Bueno, Alejandro
  • Concellón, Alberto
Liquid crystal polymer networks (LCNs) are soft, anisotropic materials that combine the order and responsiveness of liquid crystals (LCs) with the mechanical stability of polymer matrices. By polymerizing mesogenic monomers within their LC phase, LCNs retain orientational order while gaining robustness and stimuli‐responsiveness. Advances in molecular design, alignment techniques, and crosslinking chemistry have enabled precise control over structure and function across multiple length scales. In addition, emerging approaches such as additive manufacturing, “click” chemistry, and dynamic covalent bonding further expand the design space toward reconfigurable and sustainable materials. These materials exhibit programmable and reversible responses to heat, light, and electric or magnetic fields, enabling applications in soft actuation, adaptive optics, and dynamic surfaces. Cholesteric LCNs offer tunable optical properties via pitch modulation, which are exploited in sensors, smart windows, and mirrorless lasers. Nanoporous LCNs provide well‐defined nanoscale pathways for separation and electrochemical applications. This review highlights how molecular alignment, network formation, and processing strategies converge to define material performance and multifunctionality. Key challenges remain in achieving scalable fabrication, long‐term operational stability, and integration into real‐world devices. Nevertheless, LCNs are positioned as a versatile platform for next‐generation technologies in soft robotics, adaptive optics, and advanced membrane systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Establishing the hierarchy of growth-driven properties in CdS thin films and their role in CdS/PbS solar cell performance

  • Morel-Moreno, I.
  • Ramírez-Bon, R.
  • Villacampa, B.
  • Carrasco, C.
  • Valdés, M.
  • Rodríguez, C.A.
This study establishes a hierarchy of properties in CdS thin films synthesized through an ammonia-free chemical bath deposition (CBD) process with varying OH- content. By adjusting KOH volume added to the solution reaction, a progressive influence on film growth mechanisms was observed, resulting in systematic variations in thickness, morphology, stoichiometry, crystalline structure, and optical and electrical properties. These hierarchical changes directly impacted CdS/PbS solar cell performance. Thinner hexagonal CdS films, linked to low OH- content and ion-by-ion growth, enhanced cell efficiency by improving short-circuit current density (Jsc), while thicker films, with cubic structure, resulting from hydroxide-mediated growth at higher OH- levels, exhibited reduced resistivity and bandgap energy. Among these properties, film thickness emerged as the dominant factor influencing efficiency, followed by bandgap and electrical resistivity. Notably, Voc values of up to 620 mV were achieved, correlating directly with electron mobility, which reduces recombination losses. This hierarchical analysis underscores the pivotal role of OH- content in tailoring CdS film properties for enhanced CdS/PbS solar cell efficiency.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The role of flexible amide spacers in the self-assembly of star-shaped triphenylbenzenes with photoactive triphenylamine units: stimuli-responsive liquid crystals and gels

  • Martínez-Bueno, Alejandro
  • Marín San Román, Patricia
  • Giménez, Raquel
  • Sierra, Teresa
this work reports on the decisive influence of the length of flexible amide spacers for obtaining soft materials out of star-shaped molecules. Either liquid crystal behaviour or gel behaviour was found for 1,3,5-triphenylbenzene connected to three triphenylamine units through flexible amide spacers with different numbers of carbon atoms. The spacer of two carbon atoms induces liquid crystal behaviour but not gel formation. Conversely, an analogous compound with a three carbon atom spacer is not liquid crystalline and forms gels in different solvents. The obtained liquid crystal phase shows a hexagonal columnar organization responsive to electric fields, allowing the material to be aligned homeotropically in ITO cells, that is, with the columns perpendicular to the electrodes and parallel to the applied electric field. Taking advantage of the photoactivity of triarylamine units bearing amide groups, the response under light irradiation in the gel state was explored.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Core and End‐Capped Engineering as a Powerful Tool in the Search of Long‐Term High‐Performance Dye‐Sensitized Solar Cells

  • Alonso-Navarro, Matías J.
  • Franco, Santiago
  • Suárez-Blas, Fátima
  • Andreu, Raquel
  • Orduna, Jesús
  • Ramos, M. Mar
  • Segura, José L.
In the search of new electroactive organic dyes in dye‐sensitized solar cells technology, a series of D‐π‐A assemblies, named as TA‐BTD‐CNCOOH, OMeTA‐BTD‐CNCOOH, TA‐Y6‐CNCOOH, and OMeTA‐Y6‐CNCOOH is rationally designed and synthesized, in which precise modifications have been carried out in order to obtain structure‐performance relations in the field of dye‐sensitized solar cells. After careful evaluation of the photophysical and electrochemical properties of these semiconductors, these systems are applied as active materials, showing high performance with power conversion efficiency maximum values of 9.05% and 18.5% for outdoor and indoor conditions, respectively. In addition, the best material of these organic architectures, TA‐BTD‐CNCOOH, shows an excellent long‐term stability, up to 3,360 h, with no significant variance in its performance over time.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

An Amino‐Yne Click Chemistry Approach for Multi‐Responsive Liquid Crystal Elastomer Actuators

  • Bescós-Ramo, Sara
  • Turriani, Marco
  • Parmeggiani, Camilla
  • Piñol, Milagros
  • Oriol, Luis
  • Martella, Daniele
The spontaneous amino-yne click reaction is introduced for the first time as a fast, efficient, and ambient temperature strategy for preparing multi-responsive Liquid Crystal Elastomer (LCE) actuators. This synthetic approach relies on the amino-yne cross-linking between secondary amines along the main chain of poly(β-amino ester) liquid crystal oligomers and a dipropiolate-functionalized cross-linker, rendering β-aminoacrylate cross-linking points. After alignment and locking via dynamic transesterification at 30 °C, the resulting LCE actuators exhibit reversible and reproducible thermal and light-induced actuation. The generated tension and activation kinetics are easily tunable by adjusting the cross-linker content. Additionally, leveraging the acid-triggered reactivity of the network enables it to respond to additional stimuli, including water-driven actuation. By integrating the capability for dynamic bond exchange, this LCE formulation opens new avenues for designing structures with complex molecular orientation patterns. As a proof of concept, a star-shaped soft actuator is fabricated, demonstrating diverse programmable actuation modes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Light‐mediated supramolecular functionalization of polymerization‐induced self‐assembled micelles

  • Rossi, Ruggero
  • Abad, Miriam
  • Oriol, Luis
  • Martella, Daniele
  • Parmeggiani, Camilla
  • Piñol, Milagros
Precise, remote control of polymeric nanoparticles via external stimuli is a key aim for the next-generation drug delivery. As a versatile, one-pot method, polymerization-induced self-assembly (PISA) produces dispersions of block-copolymer micelles at high solids content with tunable core–corona architectures. Light is an ideal trigger to control the uptake and delivery of specific molecules inside such micelles since it can be localized, and easily tuned in intensity and wavelength. In this study, PISA is employed in water to obtain micelles containing diacylaminopyridine units functionalizable thanks to supramolecular interaction by a light-mediated process. Indeed, only if UV irradiation is used to convert thymine-based azo photoswitches into the cis form, these molecules permeate the hydrophilic corona and anchor via hydrogen bonds to the hydrophobic core of the micelles. Subsequent visible‑light exposure regenerates their trans state without micelle disassembling. The photoswitch loading boosts the encapsulation of Nile Red, studied here as a model of hydrophobic cargo, while a subsequent UV light stimulus accelerates the dye release; moreover, the selected photoswitch sustains release over days without further irradiation. By marrying advanced polymerization techniques with reversible photochemistry, dynamic micelles are prepared whose structure and cargo release can be fully controlled by light.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Phototunable Chiral-Selective Nanoporous Material

  • Marín, Iván
  • López Ram de Viu, Pilar
  • Romero, Pilar
  • Liu, Danqing
  • Broer, Dirk J.
  • Barberá, Joaquín
  • Serrano, José Luis
Herein, we present the development of tunable chiral nanoporous materials capable of enantioselectively adsorbing racemic mixtures. The materials are based on hydrogen-bonded supramolecular structures formed from a melamine derivative as the central core and three peripheral dendrons functionalized with coumarin and azobenzene moieties that are organized in hexagonal columnar phases. Upon irradiation with circularly polarized light (CPL), the azobenzene units induce controlled chirality in the material, which is stabilized by photodimerization of the coumarin moieties, obtaining mechanically stable films. The elimination of the melamine template results in nanoporous materials that retain their homeotropic hexagonal columnar alignment. These materials show selective adsorption of one particular enantiomer of racemic mixtures of (hexan-2-yl)-4-nitroaniline. Pore chirality can be reversed by changing the handedness of the CPL, allowing nanoporous materials to adsorb predominantly one or the other enantiomer. These findings offer a versatile strategy for enantioselective separation with potential applications in pharmaceuticals and materials science.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Shape‐changing multiphase microparticles from complex liquid crystal emulsions

  • Turriani, Marco
  • Parmeggiani, Camilla
  • Martella, Daniele
  • Concellón, Alberto
Complex multiphase emulsions containing liquid crystals (LCs) offer precise morphological control and dynamic tunability, enabling applications in optics, sensing, and soft matter. Here, we report a simple and scalable bulk‐emulsification strategy that circumvents the reliance on microfluidic fabrication to produce liquid crystalline network (LCN) microparticles spanning single, double (Janus), and triple emulsion morphologies within a genuinely colloidal size regime (10–20 µm). By adjusting crosslinking density and interfacial conditions, we program the LC alignment within the droplets, thereby dictating the mode and direction of actuation after photopolymerization. Single emulsions, Janus particles—coupling an active LCN hemisphere to a passive PDMS compartment—and, for the first time, triple LC emulsions—incorporating a third immiscible phase (a fluorinated oil)—are obtained via this straightforward and scalable approach. Across all morphologies, the particles exhibit robust, reversible, large‐amplitude deformations under heating, as well as chemoresponsivity through anisotropic swelling in organic solvents. In addition, the Janus particles exhibit gravitational self‐orientation, while the triple LC emulsions retain their multiphase architecture and display tunable geometries. As a proof of concept, these responsive behaviors are exploited to realize adaptive microlenses with thermally tunable focal plane and magnification, establishing complex LC emulsions as a scalable platform for multifunctional microactuators.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Antibiotic-like properties of cationic linear-dendritic macromolecules having guanidinium peripheral groups

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Exploring the functional potential of bent-core liquid crystal-based molecules with an amide linking group

  • Simic, Kristina Gak
  • Ðordevic, Ivana
  • Rybak, Paulina
  • Pociecha, Damian
  • Giménez, Raquel
  • Ros, Maria Blanca
  • Trišovic, Nemanja
A new series of bent-core molecules containing a photoactive π-conjugated structure (azobenzene, stilbene or cyanostilbene) linked to the central aromatic ring by an amide group was synthesized and characterized. Their liquid crystalline properties were analyzed in relation to the molecular structure and compared with amide-containing bent-core liquid crystals from the literature. Replacement of the azobenzene structure with a unit based on stilbene, either with or without a cyano substituent, accounted for the most significant differences in liquid crystalline behavior among the synthesized compounds. Azobenzene compound exhibited an enantiotropic B7-type phase, while (cyano)stilbene compounds formed a monotropic B1Rev phase. Cyanostilbene derivatives were fluorescent and showed aggregation-induced emission (AIE) enhancement. Furthermore, these compounds showed mechanofluorochromism, as observable emission changes in the solid state as a result of mechanical grinding. These changes turned to be reversible upon fuming with tetrahydrofuran vapor. Quantum-chemical calculations were employed to provide a detailed analysis of the most probable conformers, the impact of the cyano group orientation on the transverse and longitudinal components of the molecular dipole moment, and the electronic properties. The obtained results offer valuable molecular design guidelines for the development of new stimuli-responsive self-assembled materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

New nanostructured, ion-conductive, bent-core liquid crystals containing lithium and sodium salts as soft electrolyte candidates

  • Auria-Soro, Carlota
  • Cruz-Navarro, Nuria
  • Folcia, César L.
  • Sobrados, Isabel
  • Haddad, Amin Sharifi
  • Martínez-Felipe, Alfonso
  • Ros, M. Blanca
Two new tetraethylene glycol (TEG)-containing bent-core molecules are revealed as suitable, versatile supramolecular building blocks to form liquid crystalline phases and organogels in novel structured soft electrolytes. New amphiphilic bent-core molecules [TEG-Bx-10-14], composed of a short polar TEG-segment capping and well-defined bent-core, mesogenic-like structures, and a set of their [1/1] complexes with TfO− and Tf2N−/lithium and sodium salts [MA-TEG-Bx-10-14], are investigated for the first time. FT-IR, 13C CP-MAS-NMR and 1H MAS-NMR studies at variable temperatures indicate the selective complexation of cations in the TEG regions. Although new bent-core molecular designs [TEG-10-Bx-14] do not exhibit liquid crystal order, most of their complexes [MA-TEG-10-Bx-14] stabilize an attractive number of bent-core lamellar mesophases (SmCP, HNF-like, USmCP and Colob). Diffusion coefficients (D) of lithium, favoured by the liquid crystal phase transition, are estimated by solid state NMR spectroscopy. The direct current values of σdc ∼ 10−4 S cm−1 in the mid-high frequency range were found using dielectric spectroscopy, highlighting the potential of bent-core building blocks as organic and nanostructured soft electrolytes containing both lithium and sodium cations, whose ionic conductivities can be optimised through composition tuning and annealing.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optimizing electron injection in D-A'-π-a dye sensitized solar cells: The role of electrolyte modification

  • Duerto, Isolda
  • Orduna, Jesús
  • Villacampa, Belén
  • Blesa, María-Jesús
This study establishes a theoretical and technical pathway, based on electroanalytical methods, for an optimized design of DSSCs with balanced short-circuit current density (Jsc) and open-circuit voltage parameters (Voc). In this paper, isoindigo (iI) and benzothiadiazole (BTZ) are included as auxiliary acceptors in A-iI-Ph-SIL and A-BTZ-Ph-SIL dyes, respectively. The strength of auxiliary acceptors greatly influences the thermodynamic parameters governing the electron transfer process, as well as the proper distribution of electron density in orbitals. Theoretical calculations reveal that the isoindigo unit, in A-iI-Ph-SIL, exhibits a strong acceptor character that hinders charge transfer from the donor to the primary acceptor. However, in the A-BTZ-Ph-SIL, the moderate acceptor character of the benzothiadiazole unit allows charge movement across the molecule. Voltammetric analyses indicate that, in A-iI-Ph-SIL, the electron injection into the semiconductor is compromised because its excited state energy level is too close to the TiO2 conduction band edge. This fact limits the necessary driving force for efficient injection process. To overcome this, the influence of the iodide/triiodide electrolyte composition on the electrochemical properties is explored. A concentration of 0.1 M tert-butylpyridine yields the optimal efficiency in these devices. This particular concentration strikes the right balance between Jsc and Voc. Notably, this optimized concentration led to a significant 44 % improvement in DSSC efficiency compared to the conventional 0.5 M tert-butylpyridine concentration, achieving a maximum efficiency of 4.79 %. Electrochemical Impedance Spectroscopy indicates that better conversion efficiencies of the devices are linked to a high charge transfer resistance at the TiO₂/solvent interface.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

New Chemical Scaffold with Antimicrobial Activity Identified in a Screening of Industrial Photoactive Compounds

  • Ezquerra-Aznárez, José Manuel
  • Alonso-Román, Raquel
  • Lucía, Ainhoa
  • Andreu, Raquel
  • Franco, Santiago
  • Aínsa, José A.
  • Ramón-García, Santiago
Background/Objectives: The emergence of antimicrobial resistance threatens advances achieved by medicine in the last century. This situation has been exacerbated by the suboptimal outcome of screening campaigns to provide novel antimicrobials. Methods: An alternative strategy was employed to identify new chemical scaffolds with antimicrobial activity. A collection of photoactive compounds originally synthesized for industrial purposes was screened for antibacterial activity. Results: 4H-pyran-4-ylidenes were identified as active against Gram-positive bacteria. Compounds belonging to this family displayed dose-dependent bactericidal activity against both wild-type and methicillin-resistant Staphylococcus aureus. No cytotoxicity was observed in the HepG2 hepatic cell line at the concentrations required for antimicrobial activity against S. aureus. Resistance to 4H-pyran-4-ylidenes in S. aureus was associated with point mutations in the rny locus, which encodes for a ribonuclease that plays a key role in RNA homeostasis. Conclusions: These findings indicate that chemical libraries not originally intended for drug discovery can be an innovative source of chemical diversity for the development of novel antimicrobials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Decoding Heptazine Architectures: From Molecular Association to Structural Insight

  • Moral, Silvia del
  • Barrena-Espés, Daniel
  • Munarriz, Julen
  • Lehmann, Matthias
  • Romero, Pilar
  • Serrano, José Luis
Heptazine (Hpz) derivatives display remarkable supramolecular organization governed by noncovalent interactions. Here, we explore how molecular chirality and structural variation influence the self‐association and organization of three Hpz derivatives (two chiral and one nonchiral) in solution and in the condensed phase. Variable‐temperature and concentration‐dependent NMR studies allowed the determination of dimerization and supramolecular aggregation constants, as well as the calculation of the thermodynamic parameters of these processes. Computational studies —including conformational analysis and molecular dynamics—corroborated the experimental findings, confirming the energetic stability and geometry of the proposed dimers. Moreover, photophysical studies showed aggregation‐induced emission (AIE) behavior, with blue light emission upon molecular association. Additionally, the introduction of chiral chains resulted in mirror‐image circular dichroism (CD) responses for the two Hpz enantiomers, demonstrating retention of chirality in bulk. In contrast, the nonchiral analogue displayed liquid crystalline (LC) behavior at high temperatures, characterized by a smectic mesophase. These results reveal how subtle structural variations modulate the supramolecular, optical, and mesomorphic properties of Hpz derivatives, highlighting the versatility of the heptazine core for multifunctional supramolecular and optoelectronic materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Multiresponsive Isotropic Structural Color in Cholesteric Liquid Crystals

  • Vera-Arévalo, Mauricio
  • Concellón, Alberto
Cholesteric liquid crystals (CLCs) are promising photonic materials due to their tunable Bragg reflection. However, their practical implementation remains constrained by a fundamental trade-off: planar CLC films suffer from intrinsic viewing-angle dependence, whereas CLC emulsions remain restricted in responsiveness and macroscopic processability. Here, we address this limitation by developing multiresponsive CLC emulsion-based materials that generate isotropic (angle-independent) structural color through radial helical organization. A reactive CLC formulation was optimized to incorporate functional motifs responsive to temperature, chemical analytes, and light. The resulting droplets are embedded within a polymer matrix to yield mechanically robust films and printable inks that retain tunable Bragg reflection while suppressing angular color dispersion, enabling clearly discernible macroscopic coloration. These materials can be cast into molds, directly written, or brush-coated onto arbitrary substrates, allowing patterned coatings and three-dimensional architectures with preserved optical response. Across all formulations, distinct and reversible reflection-band shifts are observed under external stimuli, demonstrating that cholesteric pitch modulation is preserved under confinement. This strategy establishes polymer-embedded CLC droplets as versatile, multiresponsive photonic building blocks and offers a generalizable route toward processable, isotropic structurally colored materials capable of translating environmental inputs into accessible optical signals.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Liquid Crystals for Chemical and Biological Sensing: Emerging Transduction Strategies beyond Polarized Optical Microscopy

  • Gaitan, Alfonso
  • Vera-Arévalo, Mauricio
  • Concellón, Alberto
Liquid crystal (LC) sensors exploit the ability of these anisotropic soft materials to amplify molecular-scale interfacial events into macroscopic optical responses. Although classical LC sensing platforms have demonstrated high sensitivity toward chemical and biological analytes, their practical implementation remains limited by the predominance of polarized-light optical microscopy (POM), which is often qualitative, instrument-intensive, and difficult to standardize. This Spotlight examines emerging transduction strategies that move LC-based sensing beyond conventional birefringent texture analysis toward quantitative and application-relevant readouts. We first discuss classical nematic and cholesteric sensing architectures, emphasizing how interfacial anchoring, topological defects, and helical pitch modulation translate molecular interactions into optical signals. We then highlight recent approaches—including photonic and resonant optical readouts, flow cytometry, machine learning-assisted analysis, dye-doped LC systems, and dynamically reconfigurable complex LC emulsions—that convert LC ordering transitions into measurable spectral, scattering, fluorescence, absorbance, or electrical outputs. By integrating interfacial molecular recognition, LC reconfiguration, and quantitative signal generation, these advances are expanding the capabilities of LC-based sensing toward more quantitative transduction and broader compatibility with portable and automated analytical formats. Finally, we discuss remaining challenges related to reproducibility, selectivity, device integration, and scalability, and outline future opportunities for translating LC-based sensors into robust platforms for biosensing, environmental monitoring, and point-of-care diagnostics.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Peripheral Dendritic Functionalization Effects on the Self-Assembly and Thermoresponsive Behavior of Nonionic Amphiphilic Linear–Dendritic Block Copolymers in Aqueous Media

  • Martín-Martín, Javier
  • Folch-Cirujeda, Luis
  • Yus, Cristina
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Abad, Miriam
  • Sebastián, Víctor
  • Oriol, Luis
  • Piñol, Milagros
Nonionic amphiphilic block copolymers with a precise linear–dendritic architecture that exhibit thermoresponsive behavior in water are described. These copolymers consist of a hydrophilic poly(ethylene glycol) (PEG) block connected to a thermoresponsive block based on the fourth generation of 2,2-bis(hydroxymethyl)propionic acid (bis-MPA) polyester dendron, functionalized at the periphery with either ureido or glycinamide groups. In water, these linear–dendritic block copolymers (LDBCs) self-assemble into different nanostructures whose size, morphology, and thermoresponse are strongly dependent on the peripheral groups and PEG chain length. The LDBC bearing peripheral ureido groups self-assembles into small micelles that, above the cloud point temperature (Tcp), evolve into a coacervate phase rather than fully dissolve. In contrast, the glycinamide-functionalized LDBCs display characteristic UCST-type behavior. The results demonstrate that subtle structural variations in the dendron periphery within a precise linear–dendritic architecture induce significant differences in the self-assembly and thermoresponse in water. Preliminary studies on the encapsulation and thermally triggered release of Nile Red, together with high cytocompatibility of these LDBCs toward several eukaryotic cell lines, suggest their potential for drug delivery systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ion Transport in Supramolecular Ionic Liquid Crystals from Imidazolium Iodides and Hyperbranched Polyesters

  • Terrel, Almudena
  • Merino, Rosa I.
  • Serrano, José Luis
  • Concellón, Alberto
Polymeric liquid crystals (LCs) are attractive platforms for electrolyte design because their self-assembled nanostructures can generate organized ion-transport pathways while preserving the processability, thermal stability, and structural integrity required for next-generation electrochemical energy-conversion and storage devices. Herein, we report a synthetically simple and modular supramolecular strategy to transform commercially available hyperbranched bis-MPA polyester-64-OH (HBG4) into nanostructured ionic LC electrolytes by combining it with imidazolium iodide ionic liquids (ILs) bearing butyl, dodecyl, or perfluorinated chains. Hydrogen-bonding interactions between the terminal hydroxyl groups of the dendritic periphery and the imidazolium cations generate supramolecular ionic dendrimers in which distinct polar, dendritic, and apolar domains coexist within a single homogeneous polymeric material. In the bulk, cooperative nanosegregation of these domains drives self-assembly into robust smectic A LC phases over a broad compositional range, with mesophase stability strongly governed by the molecular architecture of the IL. Ionic conductivity measurements reveal clear composition–nanostructure–transport relationships, with conductivity modulated by IL content, temperature, mesophase stability, and the continuity of the polar ionic domains. In particular, perfluorinated ILs promote enhanced lamellar stability through fluorophilic segregation, whereas dodecyl-substituted ILs provide the best balance between high IL loading, LC order, and ionic transport. Overall, this work establishes hyperbranched polyesters as scalable supramolecular hosts for ILs and provides a practical route toward polymeric LC electrolytes with tunable nanostructure, ion-transport properties, and enhanced structural stability for electrochemical energy-conversion and storage applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Dynamic Covalent Functionalizationof DNA Origamivia Iminoboronate Chemistry

  • Postigo, Alejandro
  • Guerreiro, Enrique
  • Ruiz, Joseba
  • Navarrete-Burgos, M. Sofía
  • Verstraeten, William
  • Göpfrich, Kerstin
  • Hernández-Ainsa, Silvia
  • Barrio, Jesús
Reversible functionalization of DNA nanostructures is essential for their integration into dynamic biological constructs and biomedical applications. Current strategies typically rely on strand displacement or stimuli-responsive sequences, while approaches based on dynamic covalent chemistry remain largely unexplored. Yet, dynamic covalent bonds combine covalent stability with reversible exchange under mild conditions, offering adaptable and biologically compatible routes to modulate DNA nanostructures. Here, we report iminoboronate conjugation as a strategy for the reversible functionalization of DNA origami. Polyethylene glycol and cholesterol moieties bearing 2-formylphenylboronic acid are efficiently conjugated to DNA origami displaying α-effect amines, while conjugate displacement can be triggered by a small-molecule competitor. We further demonstrate the reversible anchoring of DNA origami to lipid bilayer systems, including both large and giant unilamellar vesicles. These findings establish iminoboronate chemistry as a robust, stimuli-responsive platform for interfacing DNA origami with functional moieties, paving the way for programmable nanodevices and adaptive biomimetic materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Dual Releaseof Antibiotics with Additive Effect from Cleavable Hydrogels Based on Amino/Thiol–Yne Click Chemistry

  • Bescós-Ramo, Sara
  • Yus, Cristina
  • Arruebo, Manuel
  • Piñol, Milagros
  • Oriol, Luis
Dual-antibiotic loaded poly(ethylene glycol) (PEG)-based hydrogels were developed as antimicrobial wound dressings combining covalent and physical antibiotic incorporation. Hydrogels were prepared through amino-yne click conjugation of gentamicin sulfate (Gs) and thiol-yne cross-linking, followed by ciprofloxacin (CPX) loading via swelling-diffusion. The materials exhibited tunable gelation time, swelling capacity, and drug release profiles depending on thiol content. A dual-release mechanism was achieved, consisting of an initial burst release of CPX followed by a sustained, pH-responsive release of conjugated Gs through acid cleavage of β-aminoacrylate linkages. The hydrogels showed effective wide spectrum antibacterial activity against methicillin-resistant Staphylococcus aureus and Pseudomonas aeruginosa, while cytotoxicity studies confirmed cytocompatibility at bactericidal concentrations. The results support the potential of these hydrogels as safe and effective dual-antibiotic wound dressings, allowing for the immediate elimination of invading bacteria after wounding (burst release), while maintaining long-term antibiotic release to minimize reinfection risk.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Antiaromatic Expanded Porphyrin Enables Redox-Tunable Photoconductivity in Columnar Liquid Crystals

  • Nguyen, Duong D.
  • Osterloh, W. Ryan
  • Concellón, Alberto
  • Sierra, Teressa
  • Labella, Jorge
  • Seki, Shu
  • Sessler, Jonathan L.
Liquid crystals (LCs) based on π-conjugated building blocks are well-established platforms for engineering soft optoelectronic materials. However, the incorporation of antiaromatic frameworks-despite their potential to unlock new functional paradigms-remains highly challenging. Herein, we report an antiaromatic expanded porphyrin that upon heating and then cooling self-assembles into a highly ordered rectangular columnar mesophase (Colr). The resulting supramolecular organization enables photo-induced charge transport in the LC state that is markedly enhanced compared to the amorphous monomeric precursor form. Reductive (n-type) and oxidative (p-type) chemical doping was found to generate stabilized open-shell radical species within the Colr assemblies and boost further their photoconductivity. The findings reported here establish antiaromatic expanded porphyrins as promising platforms for the construction of redox-responsive semiconducting soft materials.