Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of Reconfigurable High-Frequency Devices Using Liquid Crystal in Substrate-Integrated Gap Waveguide Technology

  • Voronov, Aleksandr Andreyevich|||0009-0008-4508-4400
  • Bachiller Martin, Maria Carmen|||0000-0002-5518-5060
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Villacampa, Belén
[EN] This article presents the theoretical study, numerical simulation and fabrication of a phase shifter and a stub resonator for use in microstrip ridge gap waveguide (MRGW) technology, using a liquid crystal (LC) in the substrate as a reconfigurable material. The phase shifter and the stub resonator are filled with LC, and thanks to the LC's dielectric anisotropy properties, the phase shift and the resonance response can be easily controlled using an external electric or magnetic bias field. The phase shifter was designed to operate in the range of 10 to 20 GHz, and the resonator was designed to operate in the range of 7.8 to 8.8 GHz. The phase shifter's responses (including both phase shift and insertion losses), associated with both the parallel and perpendicular permittivity values of the LC, were computed and measured, and then the corresponding figure of merit (FoM) was extracted. The resonator's frequency responses, associated with both the LC's parallel and perpendicular permittivity, were computed. The resonator's frequency responses, which provided different polarization voltages, were measured and compared to the simulation results. All technological issues related to both prototypes are also discussed here. The good agreement between the simulation and measurement results confirm this technology as a viable approach to the practical implementation of these microwave reconfigurable devices., This work has been supported by Ministerio de Ciencia, Innovacion y Universidades (Spanish Government) through the R&D Projects PID2022-136590OB-C41 (under grant AEI/10.13039/501100011033/FEDER, UE) and TED2021-129196B-C41 (under grant 10.13039/501100011033/Union Europea NextGenerationEU/PRTR). The authors thank the financial support from Gobierno de Aragon-Fondo Social Europeo (E47-23R) and from Universidad de Zaragoza (UZ2023-CIE-01).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Development of reconfigurable high-frequency devices using liquid crystal in substrate-integrated gap waveguide technology

  • Voronov, Aleksandr Andreyevich
  • Bachiller, Carmen
  • Villacampa, Belén
  • Boria, Vicente E.
This article presents the theoretical study, numerical simulation and fabrication of a phase shifter and a stub resonator for use in microstrip ridge gap waveguide (MRGW) technology, using a liquid crystal (LC) in the substrate as a reconfigurable material. The phase shifter and the stub resonator are filled with LC, and thanks to the LC’s dielectric anisotropy properties, the phase shift and the resonance response can be easily controlled using an external electric or magnetic bias field. The phase shifter was designed to operate in the range of 10 to 20 GHz, and the resonator was designed to operate in the range of 7.8 to 8.8 GHz. The phase shifter’s responses (including both phase shift and insertion losses), associated with both the parallel and perpendicular permittivity values of the LC, were computed and measured, and then the corresponding figure of merit (FoM) was extracted. The resonator’s frequency responses, associated with both the LC’s parallel and perpendicular permittivity, were computed. The resonator’s frequency responses, which provided different polarization voltages, were measured and compared to the simulation results. All technological issues related to both prototypes are also discussed here. The good agreement between the simulation and measurement results confirm this technology as a viable approach to the practical implementation of these microwave reconfigurable devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hybrids of Deep HOMO Organic Cyanoacrylic Acid Dyes and Graphene Nanomaterials for Water Splitting Photoanodes

  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Orduna, Jesús
  • Villacampa, Belén
  • Blesa, María-Jesús
Dye-sensitization is a promising strategy to improve the light absorption and photoactivity abilities of wide-bandgap semiconductors, like TiO2. For effective water-splitting photoanodes with no sacrificial agents, the electrochemical potential of the dye must exceed the thermodynamic threshold needed for the oxygen evolution reaction. This study investigates two promising organic cyanoacrylic dyes, designed to meet that criterion by means of theoretical calculations. Both yellow-colored dyes were synthesized and characterized by optical and photoelectrochemical techniques, demonstrating strong light absorption in the visible region, suitable experimental reduction potentials, and adsorption from the organic solvent onto mesoporous TiO2 layers. In addition, to promote immobilization in aqueous electrolytes, the dyes were hybridized with graphene oxide or multi-walled carbon nanotubes. Photoelectrochemical analysis of the dye-sensitized photoelectrodes demonstrated efficient charge transfer from the dyes to the TiO2 photoanode under simulated solar light. While the starting photocurrent notably surpassed the blank TiO2, a subsequent decay points to kinetic obstacles that still need to be overcome.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Establishing the hierarchy of growth-driven properties in CdS thin films and their role in CdS/PbS solar cell performance

  • Morel-Moreno, I.
  • Ramírez-Bon, R.
  • Villacampa, B.
  • Carrasco, C.
  • Valdés, M.
  • Rodríguez, C.A.
This study establishes a hierarchy of properties in CdS thin films synthesized through an ammonia-free chemical bath deposition (CBD) process with varying OH- content. By adjusting KOH volume added to the solution reaction, a progressive influence on film growth mechanisms was observed, resulting in systematic variations in thickness, morphology, stoichiometry, crystalline structure, and optical and electrical properties. These hierarchical changes directly impacted CdS/PbS solar cell performance. Thinner hexagonal CdS films, linked to low OH- content and ion-by-ion growth, enhanced cell efficiency by improving short-circuit current density (Jsc), while thicker films, with cubic structure, resulting from hydroxide-mediated growth at higher OH- levels, exhibited reduced resistivity and bandgap energy. Among these properties, film thickness emerged as the dominant factor influencing efficiency, followed by bandgap and electrical resistivity. Notably, Voc values of up to 620 mV were achieved, correlating directly with electron mobility, which reduces recombination losses. This hierarchical analysis underscores the pivotal role of OH- content in tailoring CdS film properties for enhanced CdS/PbS solar cell efficiency.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Core and End‐Capped Engineering as a Powerful Tool in the Search of Long‐Term High‐Performance Dye‐Sensitized Solar Cells

  • Alonso-Navarro, Matías J.
  • Franco, Santiago
  • Suárez-Blas, Fátima
  • Andreu, Raquel
  • Orduna, Jesús
  • Ramos, M. Mar
  • Segura, José L.
In the search of new electroactive organic dyes in dye‐sensitized solar cells technology, a series of D‐π‐A assemblies, named as TA‐BTD‐CNCOOH, OMeTA‐BTD‐CNCOOH, TA‐Y6‐CNCOOH, and OMeTA‐Y6‐CNCOOH is rationally designed and synthesized, in which precise modifications have been carried out in order to obtain structure‐performance relations in the field of dye‐sensitized solar cells. After careful evaluation of the photophysical and electrochemical properties of these semiconductors, these systems are applied as active materials, showing high performance with power conversion efficiency maximum values of 9.05% and 18.5% for outdoor and indoor conditions, respectively. In addition, the best material of these organic architectures, TA‐BTD‐CNCOOH, shows an excellent long‐term stability, up to 3,360 h, with no significant variance in its performance over time.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optimizing electron injection in D-A'-π-a dye sensitized solar cells: The role of electrolyte modification

  • Duerto, Isolda
  • Orduna, Jesús
  • Villacampa, Belén
  • Blesa, María-Jesús
This study establishes a theoretical and technical pathway, based on electroanalytical methods, for an optimized design of DSSCs with balanced short-circuit current density (Jsc) and open-circuit voltage parameters (Voc). In this paper, isoindigo (iI) and benzothiadiazole (BTZ) are included as auxiliary acceptors in A-iI-Ph-SIL and A-BTZ-Ph-SIL dyes, respectively. The strength of auxiliary acceptors greatly influences the thermodynamic parameters governing the electron transfer process, as well as the proper distribution of electron density in orbitals. Theoretical calculations reveal that the isoindigo unit, in A-iI-Ph-SIL, exhibits a strong acceptor character that hinders charge transfer from the donor to the primary acceptor. However, in the A-BTZ-Ph-SIL, the moderate acceptor character of the benzothiadiazole unit allows charge movement across the molecule. Voltammetric analyses indicate that, in A-iI-Ph-SIL, the electron injection into the semiconductor is compromised because its excited state energy level is too close to the TiO2 conduction band edge. This fact limits the necessary driving force for efficient injection process. To overcome this, the influence of the iodide/triiodide electrolyte composition on the electrochemical properties is explored. A concentration of 0.1 M tert-butylpyridine yields the optimal efficiency in these devices. This particular concentration strikes the right balance between Jsc and Voc. Notably, this optimized concentration led to a significant 44 % improvement in DSSC efficiency compared to the conventional 0.5 M tert-butylpyridine concentration, achieving a maximum efficiency of 4.79 %. Electrochemical Impedance Spectroscopy indicates that better conversion efficiencies of the devices are linked to a high charge transfer resistance at the TiO₂/solvent interface.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

New Chemical Scaffold with Antimicrobial Activity Identified in a Screening of Industrial Photoactive Compounds

  • Ezquerra-Aznárez, José Manuel
  • Alonso-Román, Raquel
  • Lucía, Ainhoa
  • Andreu, Raquel
  • Franco, Santiago
  • Aínsa, José A.
  • Ramón-García, Santiago
Background/Objectives: The emergence of antimicrobial resistance threatens advances achieved by medicine in the last century. This situation has been exacerbated by the suboptimal outcome of screening campaigns to provide novel antimicrobials. Methods: An alternative strategy was employed to identify new chemical scaffolds with antimicrobial activity. A collection of photoactive compounds originally synthesized for industrial purposes was screened for antibacterial activity. Results: 4H-pyran-4-ylidenes were identified as active against Gram-positive bacteria. Compounds belonging to this family displayed dose-dependent bactericidal activity against both wild-type and methicillin-resistant Staphylococcus aureus. No cytotoxicity was observed in the HepG2 hepatic cell line at the concentrations required for antimicrobial activity against S. aureus. Resistance to 4H-pyran-4-ylidenes in S. aureus was associated with point mutations in the rny locus, which encodes for a ribonuclease that plays a key role in RNA homeostasis. Conclusions: These findings indicate that chemical libraries not originally intended for drug discovery can be an innovative source of chemical diversity for the development of novel antimicrobials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Interfacial adsorption and aggregation of 4H-pyranylidene dyes on TiO2: experimental–computational structure–function study for indoor dye-sensitized solar cells

  • Royo, Raquel
  • Andreu, Raquel
  • Mendieta-Moreno, Jesús I.
  • Martínez, José I.
  • Franco, Santiago
A series of D-π-A organic dyes incorporating a 4H-pyranylidene donor, a thiophene π–spacer, and a cyanoacrylic acid anchoring group were developed to investigate substituent-controlled interfacial organization on TiO2 photoanodes. The influence of bulky triisopropylsilyl (TIPS) and hydroxymethyl groups on adsorption strength, aggregation behavior, and charge-transfer dynamics was analyzed through combined experimental characterization and multiscale modeling. Periodic DFT calculations on anatase (101) and (0 0 1) surfaces reveal stronger adsorption and enhanced surface packing for hydroxymethyl derivatives, together with facet-dependent variations in adsorption energetics and surface relaxation, while molecular dynamics simulations correlate aggregate compactness with device performance. In dye-sensitized solar cells, TIPS-substituted dyes exhibit higher open-circuit voltages due to reduced recombination, whereas hydroxymethyl analogues provide higher photocurrents. Power conversion efficiencies reach 7.4% under AM 1.5G illumination and up to 14.9% under indoor lighting, with devices retaining their efficiency for over 1000 h of operation, demonstrating excellent long-term stability. A clear relationship between interfacial aggregation, recombination resistance, and photovoltaic response is established, highlighting the role of adsorption geometry and collective organization in governing interfacial charge-transfer processes. These results establish substituent engineering on the π-spacer as an effective strategy to control interfacial organization and stability in next-generation DSSCs for both outdoor and indoor applications.