Pasar al contenido principal

FUNDAMENTOS DE LA INTERACCION DE CONTAMINANTES EMERGENTES CON MATERIALES DE BAJA DIMENSIONALIDAD

PID2023-149077OB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Covalent organic frameworks as nanocarriers of tailored BODIPY for phototheragnostic applications

  • Jimenez-Duro, Miguel
  • Soler-Beatty, Jennifer
  • Martinez-Fernandez, Marcos
  • Avellanal-Zaballa, Edurne
  • Martinez, Jose I.
  • Ortiz, Maria J.
  • Duran-Sampedro, Gonzalo
  • Banuelos, Jorge
  • Segura, Jose L.
  • Soriano-Teruel, Paula
  • García-Fernández, Alba|||0000-0002-8416-1674
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
[EN] Grafting fluorophores and photosensitizers onto nanocarriers is recognized as an effective strategy for fluorescent bioimaging and photodynamic therapy. This approach enhances targeted drug delivery to tumor sites, while improving the biocompatibility and stability of poorly water-soluble bioprobes, thereby reducing side effects. Among the available organic dyes and nanoparticles, BODIPY and COF stand out as a compatible pair for this purpose. To leverage the COF-BODIPY scaffold as a photoactive platform for biomedical applications, we have optimized their integration. To this aim, first, BODIPY units were functionalized to enable strong binding to specific sites of the COF via click chemistry, positioning the BODIPY within the pores of the COF. Following this approach, BODIPY derivatives photoactive across different spectral regions (from the green to the red window) were straightforwardly grafted onto the COF. The structural and photophysical properties of these nanomaterials were thoroughly characterized. Notably, the COF bearing styrylated and iodinated BODIPY was especially appealing due to its dual photonic performance, enabling both singlet oxygen generation and red fluorescence under long-wavelength excitation. Upon its cellular uptake by human melanoma cells, this dyed nanoparticle selectively stained lysosomes, and at the same time triggered a cytotoxic response to induce cell death under illumination with red light, thus being a suitable candidate for theragnostic purposes., This research was supported by projects: TED2021-129886B-C43 granted by MCIN/AEI/10.13039/501100011033 and the European Union NextGeneration EU/PRTR; PID2021-128141OB-C22 and PID2021-126304OB-C41 funded by MCIN/AEI/10.13039/501100011033/and by European Regional Development Fund - A way of doing Europe; PID2022-138908NB-C33 and PID2024-157648-NB-C22 granted by MICIU/AEI/10.13039/501100011033 and FEDER, UE. This study was also supported by Generalitat Valenciana (CIPROM/2021/007) and Gobierno Vasco (IT1639-22). The work was supported by CIBER -Consorcio Centro de Investigacion Biomedica en Red- (CB06/01/2012), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion. J. L. S. acknowledges the MICIIN for the REDES project "RED2022-134503-T". P. M. S-T. is grateful to the Generalitat Valenciana for a postdoctoral Investigo contract (INVEST/2023/443). J. I. M. acknowledges funding from Spanish MCIN (Grants PID2023-149077OB-C31, TED2021-12941A-I00 and PLEC2021-007906 funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR"), and Comunidad de Madrid (Grant TEC-2024/TEC-459). The Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optical Sensor Based on WS2 Quantum Dots for Lamotrigine Determination

  • Hristova, Lina
  • Martínez-Moro, Rut
  • Fernández-García, Esperanza
  • Vazquez, Luis
  • Petit-Domínguez, María Dolores
  • Casero, Elena
  • Quintana, Carmen
  • del Pozo, María
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
[EN] In this work, we obtained WS2 quantum dots by both liquid exfoliation and hydrothermal synthesis following a top-down and a bottom-up approach, respectively. The resulting nanomaterials were spectroscopically characterized by UV-vis absorption and fluorescence techniques. Atomic force microscopy measurements were performed for the morphological characterization. We have studied the interaction between the as-synthesized WS2 quantum dots with the antiepileptic drug lamotrigine, a noncolored analyte. This interaction produces a quenching of the native fluorescence of the nanomaterials, which depends linearly on the lamotrigine concentration. Moreover, the Stern-Volmer constants were calculated and the inhibition mechanism of the interaction was also investigated. Next, the WS2 quantum dots were immobilized on quartz supports for the development of an optical sensor for lamotrigine determination. The sensor shows a linear response with the analyte concentration in the 35.4-250 mu M range, with a limit of detection of 10.6 mu M. The sensor was applied to the determination of lamotrigine in a synthetic serum sample, obtaining a recovery of 94%. Moreover, for a rapid and visual detection of lamotrigine, we have tested the suitability of using paper as a support for immobilizing WS2 quantum dots., The authors acknowledge financial support from projects PID2020-113142RB-C21, PID2020-113142RB-C22, PID2023-149077OB-C32, and PID2023-149077OB-C31 funded by MCIN/AEI/10.13039/501100011033. This research was also funded by the ITQ though the project PID2021-123163OB-I00 funded by MCIN/AEI/10.13039/501100011033/and FEDER A way of making Europe and Severo Ochoa Centre of excellence program (CEX2021-001230-S). We thank to Jaime Martin Benito for his help in the characterization measurements discussion.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ionic Covalent Organic Framework as Antibacterial Additive for Biobased Polymers

  • Jiménez-Duro, M.
  • Barranco-García, Rosa
  • Martínez-Fernández, M.
  • Asenjo-Filgueira, B.
  • Martínez, José I.
  • Cuervo-Rodríguez, Rocío
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
The rise of antibiotic-resistant bacteria has created an urgent need for antibacterial materials. One of the most widespread strategies involves the covalent attachment of ionic moieties, which can, however, compromise the quality of the final polymers. Herein, we report the synthesis of ionic covalent organic framework nanoparticles via click postsynthetic modification. The material is highly dispersible and exhibits excellent antibacterial properties against both Gram-positive and Gram-negative bacteria. Furthermore, biobased polymer/COF nanocomposites were produced through casting/melt compression and melt electrospinning, retaining the antibacterial properties without sacrificing the thermal stability of the polymers. Ongoing studies in our laboratories are exploring the potential application of these composites in biomedical devices., This work was generously supported by The Ministerio de Ciencia e Innovación of Spain MICINN (Grants TED2021- 129886B-C43, PID2022-138908NB-C33, PID2022-13651OB- 100 and RED2022-134503-T) and by Comunidad de Madrid (TEC-2024/ECO-332). We acknowledge also the financial support provided by Universidad Complutense de Madrid to Group 910759 through the University Research Group Funding Program and the PTI Salud Global belonging to CSIC. M.J.-D. acknowledges Comunidad de Madrid (CT41/ 22/PEJ-2021-AI/IND-21294) for a predoctoral contract. R.B.- G. thanks the Ministerio de Ciencia e Innovación for her Juan de la Cierva contract. J.I.M. acknowledges financial support by Spanish MICINN (Grants PID2023-149077OB-C31, and PLEC2021-007906) and by Comunidad de Madrid (Grant Y2020/NMT-6469).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effective Utilization of Nanoporosity and Surface Area Guides Electrosynthesis over Soft-Landed Copper Oxide Catalyst Layers

  • Arnouts, Sven
  • Choukroun, Daniel
  • Napal, Ilargi
  • Tajuelo-Castilla, G.
  • Prieto Serrano, Javier
  • Claes, Nathalie
  • Daems, Nick
  • Nappini, Silvia
  • Magnano, Elena
  • Santoro, Gonzalo
  • Bals, Sara
  • Martín-Gago, José A.
  • Breugelmans, Tom
Porous nanomaterials find wide-ranging applications in modern medicine, optoelectronics, and catalysis, playing a key role in today's effort to build an electrified, sustainable future. Accurate in situ quantification of their structural and surface properties is required to model their performance and improve their design. In this article, we demonstrate how to assess the porosity, surface area and utilization of a model nanoporous soft-landed copper oxide catalyst layer/carbon interface, which is otherwise difficult to resolve using physisorption or capacitance-based methods. Our work employs electron tomography to characterize the three-dimensional structure of the catalyst layer and combines it with in situ soft X-ray absorption spectroscopy and lead underpotential deposition data to probe the stability and utilization of the catalyst layer under potential bias. The analysis proves that a significant share of the original surface area is exploited, and thus explains product distribution and crossover trends in the electrosynthesis of C2+ products from carbon monoxide., The authors acknowledge financial support from NFFA-NEP -European Union’s Horizon 2020 research and innovation program under grant agreement No. 101007417, proposal IDs159 and 472, and by the European Research Council (ERC CoGNo. 815128 RealNANO) to S.B. G.T.C. acknowledges funding from the Comunidad Autónoma de Madrid (grant No. PEJ-2021-AI/IND-21143). This work has been partially funded bygrant No. PID2023-149077OB-C31 funded by MCIN/AEI/10.13039/501100011033 and grant No. PLEC2021-007906 funded by MCIN/AEI/10.13039/501100011033 by the “Euro-pean Union NextGenerationEU/PRTR”. Partial funding byPhotosurf-CM (Y2020/NMT-6469) project funded by Comunidad Autónoma de Madrid and cofinanced by EuropeanStructural Funds is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the substrate in the on-surface synthesis and air stability of 1D metal-organic oligomers

  • Gómez-Fernández, José María
  • Martínez, José I.
  • Zamalloa-Serrano, Jorge Manuel
  • Naranjo, T.
  • López-Calixto, C. G.
  • Schio, L.
  • Floreano, L.
  • Mendieta-Moreno, J. I.
  • Palacio, Irene
  • Peña O'Shea, Víctor A. de la
  • Liras, Marta
  • Martín-Gago, José A.
  • López, María Francisca
  • Sánchez-Sánchez, Carlos
The development of applicable functional materials currently stands as one of the main challenges in the field of on-surface synthesis. In this direction, it is necessary to understand their stability in real conditions, what it is known as bridging the pressure gap. Interestingly, although it is well-established that the on-surface synthesis will be highly influenced by the selected substrate, little is known about the effect of the underlying substrate on the air stability of on-surface synthesized nanostructures. Applying an on-surface synthesis approach, we report a similar behavior in the synthesis of 1D metal–organic nanostructures based on a BOPHY photoactive molecule on two coinage metal surfaces, Au(1 1 1) and Ag(1 1 1), but a distinct air stability of these nanostructures when exposed to the atmospheric pressure due to the different catalytic properties of the substrates. In both cases, important comparative conclusions are extracted thanks to a combination of surface science characterization techniques with theoretical calculations. This study opens a door to the synthesis of low-dimensional photoactive materials with potential applications, emphasizing the critical role of the substrate not only in the synthesis process but also in the air stability of on-surface synthesized nanostructures., This work was supported by the S2018/NMT-4367, Y2020/NMT-6469, TEC-2024/TEC-308 and TEC-2024/TEC-459 projects funded by the “Comunidad de Madrid” and co-financed by European Structural Funds, and by grants PID2020-113142RB-C21, PID2023-146801NB-C33, PID2023-149077OB-C31, PID2021-12509OA-I00, TED2021-129999B-C31, TED2021-129416A-I00, PLEC2021-007906 and RED2022-134503-T funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, by “ERDF/EU” and the “European Union NextGenerationEU/ PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dual-Emission Switching in a Mn(II)-Based Hybrid Bromide via Water Coordination: Synthesis, Structure, and Processing

  • Garsed, R.
  • Hernanz, G.
  • Perles, J.
  • Martínez, José I.
  • Cabeza Díaz, A.
  • Cantelar, E.
  • Zamora, F.
  • Troyano, J.
  • Amo-Ochoa, P.
This work presents the synthesis, characterization, and functional evaluation of a new luminescent manganese(II) hybrid halide, (pr-ted)2[MnBr4], containing the organic cation (pr-ted)+ (1-propyl-1,4-diazabicyclo[2.2.2]octane). The compound exhibits green photoluminescence and undergoes a reversible transformation to a red-emitting hydrated form, (pr-ted)2[MnBr4(OH2)], upon exposure to ambient humidity. Single-crystal X-ray diffraction reveals differences in coordination geometry between the two phases: a tetrahedral environment in the anhydrous form and a distorted trigonal bipyramidal in the hydrated phase. This structural change is responsible for the observed red shift in emission. The interconversion is fully reversible through thermal treatment or vacuum exposure. Photoluminescence and density functional theory calculations are employed to investigate optical behavior and electronic transitions. In situ X-ray powder diffraction confirms the humidity-induced phase transition. Both forms exhibit solubility in polar solvents, enabling the fabrication of luminescent coatings via wet-processing methods. Impregnation and nebulization approaches are explored. The impregnation process enables the fabrication of composites on porous materials, while the nebulization method produces homogeneous coatings on non-porous substrates. These coatings maintain reversible luminescent switching, validating the potential of (pr-ted)2[MnBr4] as a responsive material for humidity sensing. The integration of humidity-sensitive luminescent compounds into functional platforms using cost-effective techniques is demonstrated, for applications in environmental monitoring. © 2026 The Author(s). Advanced Optical Materials published by Wiley-VCH GmbH., The authors thank Javier Piñataro for his help in the synthesis of the com-pounds. This work is dedicated to Lucas Garrote de la Fuente. This workwas supported by MCINN/AEI/10.13039/5011000011033 and EuropeanUnion Next Generation EU/PRTR, under the National Program of Sci-ences and Technological Materials (PID2022–138968NB-C21, PID2023-149077OB-C31, TED2021-12941A-I00 and PLEC2021-007906). J.T. is in-debted to the Ramón y Cajal Program (RYC2022-036283-I Fellowship).A.C.D. thanks PAIDI FQM-113 (Junta de Andalucia, Spain/FEDER). J.I.M.also acknowledges funding by CAM via the “Technologies program”(SYNMOLMAT-CM: TEC-2024/TEC-459)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning Core Flexibility and Curvature in Azine-Linked Covalent Organic Frameworks for Attomolar-Level Impedimetric Sensing of Glucose

  • Elmerhi, N.
  • Alkhatib, S.A.
  • Kumar, S.
  • Martínez, José I.
  • Yasmeen, N.
  • Aldaqqa, N.M.
  • Belec, B.
  • Pappa, A.-M.
  • Shetty, D.
Glucose serves as a key biomarker of metabolic health, requiring continuous and reliable monitoring. Nonenzymatic impedimetric sensors have emerged as a promising alternative to enzymatic glucose sensors, which dominate current clinical practice. However, their sensitivity is limited by weak molecular recognition and inefficient charge transport at the sensing interface. In this study, we tuned the core flexibility and curvature of azine-linked covalent organic frameworks (COFs) by substituting the central triazine ring in the C3symmetric building unit with a nitrogen atom. This modification maximized glucose–framework interactions, thereby enhancing signal transduction and detection sensitivity. The results confirmed the sensitivity and selectivity of the COFs toward glucose, with a linear response over a wide concentration range [1 aM–5 mM], surpassing previously reported glucose sensors. The sensors achieved a subattomolar limit of detection (LOD), with excellent stability and reproducibility compared to traditional enzymatic sensors, offering a simpler and more practical alternative for integration into wearable and implantable devices. Experimental findings are supported by molecular simulations, which reveals the mechanism of sensing and charge transfer dynamics. This work establishes a versatile design strategy for enzyme-free designed-to-purpose transducers, opening new pathways for ultrasensitive and selective molecular detection. © 2025 The Authors. Published by American Chemical Society, N.E., S.A.A., and N.M.A. acknowledge Khalifa University for the PhD fellowship. D.S. acknowledges the financial support from the Khalifa University Competitive Internal Research Award (CIRA-2021). D.S., A.M.P., N.E., and S.A. acknowledge resource support under the Center for Catalysis and Separations (CeCaS). A.M.P. acknowledges support from Biotechnology Center (BTC). J.I.M. acknowledges funding from Spanish MICIU (Grants PID2023-149077OB-C31, TED2021-12941A-I00 and PLEC2021-007906 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”), and Comunidad de Madrid (Grants FOTOSURF-CM: Y2020/NMT-6469 and SYNMOLMAT-CM: TEC-2024/TEC-459). The authors thank Dr. Gisha Elizabeth Luckachan for the NMR analyses. We also thank Dr. Mohamed Aslam for the TGA analyses and Rasha Nasser for the cytotoxicity assay., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Giant Fully Fused Tetrapodal Rylenimides: Design, Synthesis and Optoelectrochemical Characterization via Alkyl Chain and Core Engineering Strategies

  • Alonso-Navarro, M.J.
  • Suárez-Blas, F.
  • Martínez, José I.
  • Ramos, M.M.
  • Segura, J.L.
Special Issue Published as part of Organic Letters special issue “π-Conjugated Molecules and Materials”., In this work, we report the synthesis and comprehensive characterization of a new series of fully fused three-dimensional rylenimide-based derivatives featuring extended π-conjugation through core-fusion strategies and tailored side-chain engineering at the imide nitrogen, resulting in molecular architectures with up to 19 fused rings. The effects of π-extension and alkyl/aryl imide substituents on the optical and electrochemical behavior were systematically studied using UV–vis spectroscopy, cyclic voltammetry, and density functional theory calculations. The results demonstrate that combining π-extension with bulky solubilizing groups effectively suppresses undesired π–π interactions, enhances electronic delocalization, and improves device-relevant properties. This molecular design strategy offers a promising platform for the development of next-generation functional n-type organic semiconductors. © 2025 The Authors. Published by American Chemical Society, This work was financially supported by the MICINN (PID2022-138908NB-C33, TED2021-129886BC43), Comunidad de Madrid (TEC-2024/ECO-332), MICIU funding (Grants PID2023-149077OB-C31, TED2021-12941A-I00 and PLEC2021-007906 funded by MCIN/AEI/10.13039/501100011033 and by the ‘European Union NextGenerationEU/PRTR’), CAM (Grant SYNMOLMAT-CM: TEC-2024/TEC-459), the UCM (INV.GR.00.1819.10759) and the URJC (2024/SOLCON-138169). M.J.A.N. and F.S.B. gratefully acknowledge Universidad Rey Juan Carlos for his postdoctoral contract and her predoctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring the Magnetic Properties of 2D Metal-Organic Networks by Harnessing the Coordination Sphere

  • Mathialagan, S.K.
  • Parreiras, S.O.
  • Santos, J.
  • Martín-Fuentes, C.
  • Moreno, D.
  • Černa, L.
  • Tenorio, M.
  • Muñiz-Cano, B.
  • Lauwaet, K.
  • Valvidares, M.
  • Valbuena, M.A.
  • Urgel, J.I.
  • Kuch, W.
  • Gargiani, P.
  • Miranda, R.
  • Martínez, J. L.
  • Gallego, José M.
  • Martín, N.
  • Écija, D.
Achieving magnetic ordering in low-dimensional materials remains a key objective in the field of magnetism. Herein, coordination chemistry emerges as a powerful discipline to promote the stabilization of magnetism at the nanoscale. We present a thorough study of exemplary two-dimensional metal-organic nanoarchitectures synthesized on a Au(111) substrate, which are rationalized by using surface-science techniques and theoretical calculations. By tuning the stoichiometry, two distinct phases based on the same molecular linker coordinated with Co atoms are obtained, though featuring a different coordination sphere. Remarkably, our combined experimental and theoretical results suggest that for one phase the Co centers have an out-of-plane antiferromagnetic ground state, whereas for the other the Co atoms display in-plane antiferromagnetism. These results pave new avenues for designing two-dimensional (2D) metal-organic magnets and tailoring their inherent magnetic properties. © 2025 Wiley-VCH GmbH., Spanish MICINN and the Spanish Research Agency MICIN/AEI. Grant Numbers: PID2023-146373OB-I00, PID2022-136961NB-I00, PID2021-123776NB-C21, PID2023-149077OB-C31, PLEC2021-007906, RED2022-134503-T, TED2021-129416A-I00, PDC2023-145871-I00 Comunidad Autónoma de Madrid European Structural Funds ERC. Grant Numbers: ERC-2020–951224, ERC-2018-766555 Spanish Ministry of Science and Innovation. Grant Number: CEX2020-001039-S, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface Engineered 2D-β-ketoenamine Covalent Organic Framework for Superior Dechlorination via Hybrid Capacitive Deionization

  • Aldaqqa, N.M.
  • Kumar, S.
  • Martínez, José I.
  • Elmerhi, N.
  • Alhseinat, E.
  • Shetty, D.
To prevent a global water shortage crisis, we must innovate to desalinate seawater. Hybrid capacitive deionization (HCDI), an energy-efficient desalination method, depends on electrode materials. Removing chloride ions (Cl−), a key salinity factor, is vital for balanced electrode capacity. Yet, efforts focus mainly on cathode materials for Na+ capture, limiting the progress of electrochemical desalination. Herein, we have developed a covalent organic framework (COF)-based redox-active anode material with excellent chemical stability and unique pseudocapacitive behavior. In the HCDI cell, the rationally designed material showed a remarkable chloride ion removal capacity (Cl-RC) of 71.5 mg g−1 in 1300 ppm saline solution with a noteworthy removal capacity rate (Cl− RCR) of 1.85 mg g−1 min−1, while maintaining 98.7% capacity retention over 30 cycles. Under optimized conditions, the COF electrode displayed a high selectivity toward Cl− over other anions present in real-seawater samples with Cl-RC of 89 mg g−1, implying its practical applicability. To the best of our knowledge, this work represents the first example of a purposefully functionalized COF serving as an anode in HCDI, highlighting the promising role of COFs in advancing capacitive deionization technologies. © 2025 The Author(s). Angewandte Chemie International Edition published by Wiley-VCH GmbH., NMA and NE acknowledge Khalifa University for PhD fellowship. SK and DS acknowledge Khalifa University, Abu Dhabi (UAE) for the generous support of this research. NMA acknowledges Safa Gaber for collecting TEM images, Abeer F. Shunnar for collecting TGA data, and Gisha for NMR data acquisition. DS acknowledges the financial support from the Khalifa University Competitive Internal Research Award (CIRA-2021) and the resource support under the Center for Catalysis and Separations (CeCaS, grantRCII-2018–024). JIM acknowledges MICIU funding (Grants PID2023-149077OBC31, TED2021-12941A-I00 and PLEC2021-007906 funded by MCIN/AEI/10.13039/501100011033 and by the ’European Union NextGenerationEU/PRTR’), and CAM (Grants FOTOSURF-CM: Y2020/NMT-6469 and SYNMOLMATCM: TEC-2024/TEC-459)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Moiré-Induced Enhanced Hydrogen Adsorption on Graphene

  • Arribas, Daniel
  • Sáez-Coronado, A.
  • Cirera, Borja
  • Blanco, Natalia
  • Martínez, José I.
  • Gutiérrez, A.
  • Martín-Gago, José A.
  • Palacio, Irene
  • Merino, Pablo
The periodic patterning induced by moiré superstructures enables the synthesis of spatially functionalized graphene surfaces owing to changes in the local reactivity of the material. However, quantitative characterization of the effect of different moiré patterns remains elusive. By exploiting the large number of moiré superstructures appearing on epitaxial graphene grown on a Pt(111) surface, this stud examines the effect of moiré-induced corrugation on the local reactivity toward hydrogenation. This work combines atomically resolved scanning tunneling microscopy alongside density functional theory and Monte Carlo simulations of hydrogen chemisorption. The findings reveal a more efficient hydrogen adsorption onto moiré patterns compared to flat graphene, with a marked selectivity toward the most topographically protruding areas of the moiré. This moiré-induced enhancement of the hydrogenation efficiency is slightly increased on the most corrugated structures, which also display longer residence times and a higher stability against thermal desorption. © 2025 The Author(s). Small published by Wiley-VCH GmbH., The authors acknowledge financial support from the Spanish MICIN (grants PID2021-12509OA-I00, PID2023-149077OBC31, TED2021-129416A-I00, TED2021-129999B-C31, RYC2024- 049194-I, EUR2021-122006, and CNS2022-135658 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, by “ERDF/EU” and the “European Union NextGenerationEU/ PRTR”) and TEC-2024/TEC-459 project funded by the “Comunidad de Madrid” and co-financed by European Structural Funds. The authors acknowledge the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S. BC acknowledges support from the Spanish CM “Talento Program César Nombela” (project No. 2023-T1/TEC-28968). DA also acknowledges funding from the Spanish MICIN through an FPU-2019 predoctoral grant (FPU19/04556), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced selective gold recovery from e-waste via synergistic hetero-atom controlled quasi-planar benzoxazine-based covalent organic frameworks

  • Kumar, S.
  • Bashri, M.
  • Gaber, S.
  • Martínez, José I.
  • O’Connor, M.J.
  • Varghese, S.
  • Belec, B.
  • Luckachan, G.E.
  • Shetty, D.
Efficient and selective gold recycling from e-waste mixtures is crucial for advancing sustainability, the circular economy, and waste management objectives. However, the complex composition of e-waste and the underdeveloped practical potential of current adsorbents highlight the need for innovative sorbent development. Here, we present quasi-planar, benzoxazine-core-based two-dimensional covalent organic frameworks (COFs) with synergistic hetero-atom control across the network, achieved via a multi-component synthetic approach. These COFs, designed with specific gold interaction sites, were explored for the highly selective recovery of gold from real e-waste mixtures. By tuning the hetero-atom distribution, we achieved an impressive gold uptake capacity of 3467 mg g−1 and over 92% selectivity in presence of 12 competing metal ions from e-waste leachate. These findings underscore the critical role of molecular-level engineering in COF sorbents, paving the way for the practical recovery of noble metals from e-waste. © 2025 The Royal Society of Chemistry., Sushil Kumar and Dinesh Shetty acknowledge Khalifa University of Science & Technology, Abu Dhabi (UAE) for the generous support of this research. Sushil Kumar acknowledges Safa Gaber for SEM and TEM data collection, Jose I Martinez for theoretical studies, Matthew J O’Connor for ICP analysis, Sabu Varghese and Gisha Elizabeth Luckachan for solid-state NMR studies, and Blaž Belec for BET studies. Core Technologies Platform (CTP) at New York University Abu Dhabi for the ICP and solid-state NMR instrumentation. Dinesh Shetty acknowledges the financial support from the Khalifa University Competitive Internal Research Award (CIRA-2021) and resource support under the Center for Catalysis and Separations (CeCaS, grantRCII-2018-024). Mahira Bashri and Safa Gaber acknowledge Khalifa University of Science & Technology for PhD fellowship. José I Martínez acknowledges MICIU funding (Grants PID2023-149077OB-C31, TED2021-12941A-I00 and PLEC2021-007906 funded by MCIN/AEI/10.13039/501100011033 and by the ’European Union Next GenerationEU/PRTR’), and CAM (Grants FOTOSURF-CM: Y2020/NMT-6469, SYNMOLMAT-CM: TEC-2024/TEC-459). Blaž Belec acknowledges ARIS P2-0412 programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comprehensive characterization of high-quality hexagonal boron nitride ultra-thin films grown by scalable ion beam assisted deposition

  • Azpeitia, Jon
  • Gago, Raul
  • Esteban, David
  • Santoro, Gonzalo
  • García-Hernández, Mar
  • Jiménez, Ignacio
9 pages, 4 figures, Hexagonal boron nitride (h-BN) is a key material for 2D heterostructures and electronic devices. It has been widely employed as encapsulant, dielectric barrier and, mainly, as a substrate for graphene since it significantly enhances its electronic properties and in particular the mobility of the charge carriers. However, these advances are to a great extent restricted to laboratory-scale experiments due to the limited scalability of current h-BN growth methods. In this work, we present an in-depth study of h-BN thin films grown by ion beam assisted deposition (IBAD), a versatile and scalable technique that enables the synthesis of high-quality ultra-flat layers with tunable thickness on metallic, semiconducting, or insulating substrates. Comprehensive structural, optical, and morphological characterization of the h-BN films was performed using complementary spectroscopic and advanced microscopy techniques. Our results reveal the growth of highly in-plane textured nanocrystalline h-BN layers exhibiting very low defect density and ultraflat surfaces with a wide bandgap around 5.35 eV. These findings make IBAD a promising method for the scalable growth of highly performing h-BN thin films for integration as substrates in graphene-based devices., The authors Acknowledge the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S, the financial support from PID2023-149077OB-C31 funded by MCIN/AEI/10.13039/50110001103, and from TEC-2024/TEC-459 funded by Comunidad Autónoma de Madrid., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effects of Elevated Temperatures and Catalyst Layer Morphology on the Carbon Balance during Electrochemical CO Reduction

  • Rossen, A.
  • Daems, N.
  • Choukroun, D.
  • Tajuelo-Castilla, G.
  • Santoro, Gonzalo
  • Martín-Gago, José A.
  • Breugelmans, T.
9 pages, 5 figures, 1 table, The electrochemical reduction of carbon monoxide (CORR) offers a promising opportunity to convert renewable electricity into value-added C2+ chemicals, such as ethylene, ethanol, and acetate. While scaled electrolyzer systems are expected to operate at elevated temperatures, the impact of temperature on crossover during CORR remains underexplored. In this study, we systematically evaluate the influence of temperature (25–85 °C) on the CORR using various copper-based catalyst layers, cell configurations (flow-by and anion exchange zero-gap membrane cell), and processing conditions (anolyte concentration, current density, and temperature). At low current density (−50 mA cm–2), product selectivity is found to be insensitive to temperature across the full investigated range. In addition, elevated temperatures significantly suppress the crossover of liquid products to the anolyte, thus, improving the net carbon efficiency. At higher current densities, conventional sputtered Cu electrodes suffer from severe flooding and CO starvation, limiting performance and selectivity. To address this, spray-coated Cu/PTFE electrodes are introduced, combining porosity and hydrophobicity to stabilize performance. These electrodes enable study of the CORR at current densities and temperatures of up to 400 mA cm–2 and 85 °C, respectively. Overall, the study shows that the temperature primarily affects product transport rather than reaction pathways. Understanding thermal effects is critical for guiding the design of CORR systems capable of efficient, stable operation under thermally and industrially realistic conditions., D.C. and N.D. acknowledge financial support from NFFA-NEP European Union’s Horizon 2020 research and innovation program under grant agreement No. 101007417, proposal ID 472. A.R. was financially supported through a PhD fellowship for strategic basic research (grant Nos. 1S37222N and 1S37224N). This work was cofunded by the Flanders Industry Innovation Moonshot program for the action CLUE HBC.2021.0586 and the FWO (SBO grant number S005226N eSAF project). J.Á .M.-G., G.S., and G.T.-C. acknowledge funding through the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S and the national plan PID2023-149077OB-C31.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Different configurations of carbon electrochemical sensors based on diamond nanoparticles for the simultaneous detection of phenolic compounds

  • Blanco, Elías
  • Vázquez, Luis
  • Pozo, María del
  • Da Silva, Maria Pilar
  • Quintana, Carmen
  • Casero, Elena
  • Petit-Domínguez, María Dolores
In this work, we report the development of two different configurations of electrochemical carbon-based sensors for the simultaneous determination of phenolic compounds, namely hydroquinone, catechol, and resorcinol, which are harmful to human health and commonly found in the environment as a result of industrial discharges. In a first approach, we used diamond nanoparticles (DNPs) to modify the surface of a glassy carbon electrode to take advantage of their catalytic properties together with their electrical conductivity, high surface area and chemical stability. In a second approach, we extrapolated the developed electrochemical sensor to a low-cost device based on a carbon paper electrode modified with diamond nanoparticles. The aim of assaying this second configuration is to test whether it is possible to carry out the simultaneous determination of these phenols employing this flexible and low-cost substrate. Both configurations were morphologically characterized by scanning electron microscopy and atomic force microscopy. We have evaluated by cyclic voltammetry the responses of the glassy carbon and carbon paper electrodes in their bare or diamond nanoparticles-modified forms. The presence of diamond nanoparticles improves the sensitivity and peak separation, enabling the resolution of the three peaks. The overlapping of DNP surface unsaturated bond orbitals, which leads to the formation of discrete electronic states within the diamond's band gap, explains the conductivity and electrocatalytic properties of this nanomaterial. Its presence on the electrode also increases the surface area available for detection. Using the differential pulse voltammetry technique, we have obtained detection and quantification limits in the range of 1.8–8.5 μM and 6.0–28 μM, respectively, with wide linear concentration ranges. Furthermore, reproducibility (expressed as RSD) was between 4.8 % and 7.0 % and accuracy values, in terms of relative error, were below 8.0 %. Furthermore, the DNP-modified carbon paper sensor exhibits higher sensitivity than the glassy carbon-based sensor. To assess the electrochemical sensor applicability, a real river water sample was analysed, yielding recovery percentages between 90 % and 110 %., The authors acknowledge financial support from the projects PID2023-149077OB-C31, PID2023-149077OB-C32 and the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S funded by MCIN/AEI/10.13039/501100011033., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MoSe2xTe2–2x alloy for hydrogen gas detection

  • Tabares, Gema
  • Magro, Raúl
  • Vázquez, Luis
  • Fernández, Alejandro
  • Gordillo, N.
This study presents one of the first detailed investigation into the out-of-plane growth of two-dimensional MoSe2xTe2–2x for three distinct Se:Te compositions, yielding the samples MoSe0.46Te1.55, MoSe0.55Te1.45, and MoSe0.64Te1.35. Scanning electron microscopy reveals the morphological evolution, showcasing nanoflakes predominantly grown in a random out-of-plane orientation. Raman spectroscopy confirms the crystal structure of MoSe2xTe2–2x samples, with no detectable traces of MoO3 or MoO2 precursors. Distinctive peaks validate the presence of MoSe2xTe2–2x, while spectral shifts suggest at compositional variations. Conductive-Atomic Force Microscopy (C-AFM) was used to quantify current flow between a diamond-doped AFM tip and the sample. Additionally, the resistances of compositions MoSe0.46Te1.55, MoSe0.55Te1.45, and MoSe0.64Te1.35 were characterized, yielding median values of 108.0 Ω, 25.4 kΩ, and 240.0 kΩ, respectively, indicating diverse electrical properties associated with Se content. Notably, the sample with the highest Se content exhibits increased resistivity as anticipated, consistent with XRD spectra results. Finally, gas-sensing performance is evaluated by assessing electrical resistance variations before and after exposure to H2 gas at various temperatures, revealing significant changes indicative of enhanced charge flow upon H2 exposure., This work has been funded by the Young Researchers project of the Comunidad de Madrid and Universidad Autónoma de Madrid under grant code SI3/PJI/2021-00428. The authors acknowledge the service from the MiNa Laboratory at IMN and the funding from CM (project SpaceTec, S2013/ICE2822). L.V. acknowledges financial support from project PID2023-149077OB-C31 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Natural Layered Phlogopite Dielectric for Ultrathin Two-Dimensional Optoelectronics

  • Pucher, Thomas
  • Hernandez-Ruiz, Julia
  • Tajuelo-Castilla, G.
  • Martín-Gago, José A.
  • Munuera, C.
  • Castellanos-Gómez, Andrés
The integration of high-dielectric-constant (high-κ) materials with two-dimensional (2D) semiconductors is promising to overcome performance limitations and reach their full theoretical potential. Here, we show that naturally occurring phlogopite mica, exfoliated into ultrathin flakes, can serve as a robust high-κ dielectric layer for transition metal dichalcogenide-based 2D electronics and optoelectronics. The wide band gap (∼4.8 eV), high dielectric constant (∼11), and large breakdown field (>10 MV cm–1) of phlogopite enable transistors with subthreshold swings down to 100 mV dec–1, minimal hysteresis (∼30–60 mV), and interface trap densities comparable to those of state-of-the-art oxide dielectrics. Moreover, phototransistors built upon monolayer molybdenum disulfide (MoS2) and phlogopite exhibit responsivities up to 3.3 × 104 AW–1 and detectivities close to 1010 Jones, surpassing devices based on conventional gate insulators. We further demonstrate the versatility of this natural dielectric by integrating phlogopite/MoS2 heterostructures into NMOS inverters, showcasing robust voltage gains and low-voltage operation. Our findings establish phlogopite as a promising, earth-abundant dielectric for next-generation 2D transistor technologies and high-performance photodetection., We acknowledge funding from the Spanish Ministry of Science and Innovation (Grants PID2020-115566RB-I00, TED2021-132267B-I00, PDC2023-145920-I00, PRE2022-105538, and PID2023-149077OB-C31) and the Comunidad de Madrid (Project TEC-2024/TEC-308)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical Sensor Based on WS2 Quantum Dots for Lamotrigine Determination

  • Hristova, Lina
  • Martínez-Moro, Rut
  • Fernández-García, Esperanza
  • Vázquez, Luis
  • Atienzar, Pedro
  • Petit-Domínguez, María Dolores
  • Casero, Elena
  • Quintana, Carmen
  • Pozo, María del
In this work, we obtained WS2 quantum dots by both liquid exfoliation and hydrothermal synthesis following a top-down and a bottom-up approach, respectively. The resulting nanomaterials were spectroscopically characterized by UV–vis absorption and fluorescence techniques. Atomic force microscopy measurements were performed for the morphological characterization. We have studied the interaction between the as-synthesized WS2 quantum dots with the antiepileptic drug lamotrigine, a noncolored analyte. This interaction produces a quenching of the native fluorescence of the nanomaterials, which depends linearly on the lamotrigine concentration. Moreover, the Stern–Volmer constants were calculated and the inhibition mechanism of the interaction was also investigated. Next, the WS2 quantum dots were immobilized on quartz supports for the development of an optical sensor for lamotrigine determination. The sensor shows a linear response with the analyte concentration in the 35.4–250 μM range, with a limit of detection of 10.6 μM. The sensor was applied to the determination of lamotrigine in a synthetic serum sample, obtaining a recovery of 94%. Moreover, for a rapid and visual detection of lamotrigine, we have tested the suitability of using paper as a support for immobilizing WS2 quantum dots., The authors acknowledge financial support from projects PID2020-113142RB-C21, PID2020-113142RB-C22, PID2023-149077OB-C32, and PID2023-149077OB-C31 funded by MCIN/AEI/10.13039/501100011033. This research was also funded by the ITQ though the project PID2021-123163OB-I00 funded by MCIN/AEI/10.13039/501100011033/and FEDER A way of making Europe and Severo Ochoa Centre of excellence program (CEX2021-001230-S)., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interfacial adsorption and aggregation of 4H-pyranylidene dyes on TiO2: experimental–computational structure–function study for indoor dye-sensitized solar cells

  • Royo, Raquel
  • Andreu, Raquel
  • Mendieta-Moreno, Jesús I.
  • Martínez, José I.
  • Franco, Santiago
A series of D-π-A organic dyes incorporating a 4H-pyranylidene donor, a thiophene π–spacer, and a cyanoacrylic acid anchoring group were developed to investigate substituent-controlled interfacial organization on TiO2 photoanodes. The influence of bulky triisopropylsilyl (TIPS) and hydroxymethyl groups on adsorption strength, aggregation behavior, and charge-transfer dynamics was analyzed through combined experimental characterization and multiscale modeling. Periodic DFT calculations on anatase (101) and (0 0 1) surfaces reveal stronger adsorption and enhanced surface packing for hydroxymethyl derivatives, together with facet-dependent variations in adsorption energetics and surface relaxation, while molecular dynamics simulations correlate aggregate compactness with device performance. In dye-sensitized solar cells, TIPS-substituted dyes exhibit higher open-circuit voltages due to reduced recombination, whereas hydroxymethyl analogues provide higher photocurrents. Power conversion efficiencies reach 7.4% under AM 1.5G illumination and up to 14.9% under indoor lighting, with devices retaining their efficiency for over 1000 h of operation, demonstrating excellent long-term stability. A clear relationship between interfacial aggregation, recombination resistance, and photovoltaic response is established, highlighting the role of adsorption geometry and collective organization in governing interfacial charge-transfer processes. These results establish substituent engineering on the π-spacer as an effective strategy to control interfacial organization and stability in next-generation DSSCs for both outdoor and indoor applications., The work at the University of Zaragoza was financially supported by Gobierno de Aragón (E47_23R), the University of Zaragoza (UZ2023-CIE01) and The Severo Ochoa Centres of Excellence program through Grant CEX2023-001286-S funded by MICIU/AEI /10.13039/501100011033. R. Royo acknowledges for the financial support of Gobierno de Aragón: Fellowship program 2018–2022 period co-financed with the Operational Program FSE Aragón 2014-2022. J. I. Martínez acknowledges funding by MICIU (Grants PID2023-149077OB-C31, TED2021-12941A-I00 and PLEC2021-007906 funded by MCIN/AEI/10.13039/501100011033 and by the ’European Union NextGenerationEU/PRTR’), CAM (Grant SYNMOLMAT-CM: TEC-2024/TEC-459) and “The Severo Ochoa Centres of Excellence” program through Grant CEX2024-001445-S. Both research groups acknowledge the MICINN (RED2022-134503-T). J. I. Mendieta-Moreno acknowledges funding by the European Union (HORIZON-MSCA-2021-PF-101065707)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2024-001445-S),, Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Interfacial adsorption and aggregation of 4H-pyranylidene dyes on TiO2: experimental–computational structure–function study for indoor dye-sensitized solar cells

  • Royo, Raquel
  • Andreu, Raquel
  • Mendieta-Moreno, Jesús I.
  • Martínez, José I.
  • Franco, Santiago
A series of D-π-A organic dyes incorporating a 4H-pyranylidene donor, a thiophene π–spacer, and a cyanoacrylic acid anchoring group were developed to investigate substituent-controlled interfacial organization on TiO2 photoanodes. The influence of bulky triisopropylsilyl (TIPS) and hydroxymethyl groups on adsorption strength, aggregation behavior, and charge-transfer dynamics was analyzed through combined experimental characterization and multiscale modeling. Periodic DFT calculations on anatase (101) and (0 0 1) surfaces reveal stronger adsorption and enhanced surface packing for hydroxymethyl derivatives, together with facet-dependent variations in adsorption energetics and surface relaxation, while molecular dynamics simulations correlate aggregate compactness with device performance. In dye-sensitized solar cells, TIPS-substituted dyes exhibit higher open-circuit voltages due to reduced recombination, whereas hydroxymethyl analogues provide higher photocurrents. Power conversion efficiencies reach 7.4% under AM 1.5G illumination and up to 14.9% under indoor lighting, with devices retaining their efficiency for over 1000 h of operation, demonstrating excellent long-term stability. A clear relationship between interfacial aggregation, recombination resistance, and photovoltaic response is established, highlighting the role of adsorption geometry and collective organization in governing interfacial charge-transfer processes. These results establish substituent engineering on the π-spacer as an effective strategy to control interfacial organization and stability in next-generation DSSCs for both outdoor and indoor applications.