Pasar al contenido principal

MATERIALES METAL-ORGANICOS FOTOCATALITICOS Y CON CAPACIDAD DE “LIGHT DOWN-SHIFTING” PARA EL APROVECHAMIENTO DE LA ENERGIA SOLAR (UAM))

PID2022-138968NB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD AUTONOMA DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improvement in the efficiency of silicon PV modules with a highly luminescent copper(I)-I-based coordination compound by using different processing strategies

  • Garsed, Ricardo
  • Brito-Santos, Gabriela
  • Hernández Rodríguez, Cecilio
  • Guerrero Lemus, Ricardo
  • Salavagione, Horacio J.
  • Gómez-Fatou, Marián A.
  • Lifante-Pedrola, Ginés
  • Troyano, Javier
  • Amo-Ochoa, Pilar
This research shows how the copper(I) iodide coordination compound, [Cu<inf>4</inf>I<inf>6</inf>(pr-ted)<inf>2</inf>] (pr-ted = 1-propyl-1,4-diazobiciclo[2.2.2]octan-1-ium) can be an excellent downshifter to improve the efficiency of commercial multicrystalline silicon (mc-Si) photovoltaic (PV) modules. This compound was selected for its intense green emission, high photoluminescence quantum yield, high thermal stability, and single-step synthesis in water/ethanol at room temperature. Different types of configurations were investigated to integrate it into mc-Si PV modules. Thus, microcrystalline powder was deposited as a thin layer or as part of a composite film by means of its dispersion in commercial ethylene vinyl acetate (EVA). Both the transparency and concentration have been studied as critical factors that influence the resulting external quantum efficiency and the power conversion efficiency of the modified PV modules. The efficiency improvements are very relevant compared to previous examples based on lanthanides. Depending on the method used for the deposition on the PV module, different efficiency increases can be achieved reaching 0.36% and up to 0.42% with 0.05 and 0.1 mg/cm<sup>2</sup> of compound. The composite film approach enables the industrial manufacture of EVA modified with the downshifter. Accordingly, large-scale hot-pressing production of [Cu<inf>4</inf>I<inf>6</inf>(pr-ted)<inf>2</inf>]@EVA films was carried out., This work has been supported by MCINN/AEI/10.13039/ 5011000011033 under the National Program of Sciences and Technological Materials and for the European Union Next Generation EU/ PRTR, (PID2022-138968NB-C21, PID2022-138968NB-C22, TED2021- 129810B-C22 and TED2021-131132B-C22)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dual-Emission Switching in a Mn(II)-Based Hybrid Bromide via Water Coordination: Synthesis, Structure, and Processing

  • Garsed, R.
  • Hernanz, G.
  • Perles, J.
  • Martínez, José I.
  • Cabeza Díaz, A.
  • Cantelar, E.
  • Zamora, F.
  • Troyano, J.
  • Amo-Ochoa, P.
This work presents the synthesis, characterization, and functional evaluation of a new luminescent manganese(II) hybrid halide, (pr-ted)2[MnBr4], containing the organic cation (pr-ted)+ (1-propyl-1,4-diazabicyclo[2.2.2]octane). The compound exhibits green photoluminescence and undergoes a reversible transformation to a red-emitting hydrated form, (pr-ted)2[MnBr4(OH2)], upon exposure to ambient humidity. Single-crystal X-ray diffraction reveals differences in coordination geometry between the two phases: a tetrahedral environment in the anhydrous form and a distorted trigonal bipyramidal in the hydrated phase. This structural change is responsible for the observed red shift in emission. The interconversion is fully reversible through thermal treatment or vacuum exposure. Photoluminescence and density functional theory calculations are employed to investigate optical behavior and electronic transitions. In situ X-ray powder diffraction confirms the humidity-induced phase transition. Both forms exhibit solubility in polar solvents, enabling the fabrication of luminescent coatings via wet-processing methods. Impregnation and nebulization approaches are explored. The impregnation process enables the fabrication of composites on porous materials, while the nebulization method produces homogeneous coatings on non-porous substrates. These coatings maintain reversible luminescent switching, validating the potential of (pr-ted)2[MnBr4] as a responsive material for humidity sensing. The integration of humidity-sensitive luminescent compounds into functional platforms using cost-effective techniques is demonstrated, for applications in environmental monitoring. © 2026 The Author(s). Advanced Optical Materials published by Wiley-VCH GmbH., The authors thank Javier Piñataro for his help in the synthesis of the com-pounds. This work is dedicated to Lucas Garrote de la Fuente. This workwas supported by MCINN/AEI/10.13039/5011000011033 and EuropeanUnion Next Generation EU/PRTR, under the National Program of Sci-ences and Technological Materials (PID2022–138968NB-C21, PID2023-149077OB-C31, TED2021-12941A-I00 and PLEC2021-007906). J.T. is in-debted to the Ramón y Cajal Program (RYC2022-036283-I Fellowship).A.C.D. thanks PAIDI FQM-113 (Junta de Andalucia, Spain/FEDER). J.I.M.also acknowledges funding by CAM via the “Technologies program”(SYNMOLMAT-CM: TEC-2024/TEC-459)., Peer reviewed