Pasar al contenido principal

INSTRUMENTACION INTELIGENTE Y APLICACION EN SALUD

PID2021-125091OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE MALAGA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the substrate in the on-surface synthesis and air stability of 1D metal-organic oligomers

  • Gómez-Fernández, José María
  • Martínez, José I.
  • Zamalloa-Serrano, Jorge Manuel
  • Naranjo, T.
  • López-Calixto, C. G.
  • Schio, L.
  • Floreano, L.
  • Mendieta-Moreno, J. I.
  • Palacio, Irene
  • Peña O'Shea, Víctor A. de la
  • Liras, Marta
  • Martín-Gago, José A.
  • López, María Francisca
  • Sánchez-Sánchez, Carlos
The development of applicable functional materials currently stands as one of the main challenges in the field of on-surface synthesis. In this direction, it is necessary to understand their stability in real conditions, what it is known as bridging the pressure gap. Interestingly, although it is well-established that the on-surface synthesis will be highly influenced by the selected substrate, little is known about the effect of the underlying substrate on the air stability of on-surface synthesized nanostructures. Applying an on-surface synthesis approach, we report a similar behavior in the synthesis of 1D metal–organic nanostructures based on a BOPHY photoactive molecule on two coinage metal surfaces, Au(1 1 1) and Ag(1 1 1), but a distinct air stability of these nanostructures when exposed to the atmospheric pressure due to the different catalytic properties of the substrates. In both cases, important comparative conclusions are extracted thanks to a combination of surface science characterization techniques with theoretical calculations. This study opens a door to the synthesis of low-dimensional photoactive materials with potential applications, emphasizing the critical role of the substrate not only in the synthesis process but also in the air stability of on-surface synthesized nanostructures., This work was supported by the S2018/NMT-4367, Y2020/NMT-6469, TEC-2024/TEC-308 and TEC-2024/TEC-459 projects funded by the “Comunidad de Madrid” and co-financed by European Structural Funds, and by grants PID2020-113142RB-C21, PID2023-146801NB-C33, PID2023-149077OB-C31, PID2021-12509OA-I00, TED2021-129999B-C31, TED2021-129416A-I00, PLEC2021-007906 and RED2022-134503-T funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, by “ERDF/EU” and the “European Union NextGenerationEU/ PRTR”., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

An Optimization Approach to Eliminate Crosstalk in Zero-Potential Circuits for Reading Resistive Sensor Arrays

  • Domínguez-Gimeno, Sergio
  • Medrano-Sánchez, Carlos
  • Igual-Catalán, Raúl
  • Martínez-Cesteros, Javier
  • Plaza-García, Inmaculada
Crosstalk is a well-known problem in resistive sensor arrays (RSAs). The zero-potential method (ZPM) is a commonly used readout circuit that uses multiplexers and demultiplexers to reduce the main sources of crosstalk. However, the internal resistors of these switches cause a secondary crosstalk in the RSA that alters the RSA sensor values read. The solution to the effects of this secondary crosstalk is still a case of study. In previous literature, these resistances have been considered as known and, in most cases, equal for all switch channels. However, in a real situation, they are unknown and may vary between channels. In this work, a least-squares (LSQR) method is presented to obtain the true values of the switches from the read voltage signals. Calibration columns are added to the RSA for this purpose. To prove the performance of the method proposed, several simulations have been carried out with different values of RSA sensors, switch resistances, size of the RSA, and noise level. Results show that the proposed LSQR method allows obtaining simultaneously accurate values for both the RSA sensors and switch internal resistors. In this way, the problem of secondary crosstalk is neutralized. It also shows better performance when compared with existing approaches.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Creep and hysteresis compensation in pressure-sensitive mats for improving center-of-pressure measurements

  • Martínez-Cesteros, Javier
  • Medrano-Sánchez, Carlos
  • Castellanos-Ramos, Julián
  • Sánchez-Durán, José A.
  • Plaza-García, Inmaculada
Large-area tactile sensors are used to image the pressure exerted by human body parts. More specifically, they can be used to measure plantar pressure on human stability tests. The center-of-pressure (CoP) trajectory is the primary outcome of such tests. Previous research has shown that the parameters obtained from the trajectory correlate with those obtained from a reference instrument, that is, a force platform (FP). However, there are still noticeable differences. In this work, a low-cost prototype of a pressure-sensitive mat (PSM) has been built and compared with an FP in stability tests. The sensitive material is Velostat, which is readily available. Such a mat could make objective stability tests more accessible. A model of two nonlinear effects, hysteresis and creep, has been considered to compensate for them. Given that it was rather difficult to characterize the large mat with a pneumatic device, a small-sized sensor array was first characterized in a controlled environment. Then the model was extended to the large mat using a suitable scaling factor. The experimental results show that compensating for the nonlinear effects led to a decrease in the differences between the two instruments, the FP and the mat, with an average improvement of 26% in the distance between the trajectories.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Application of an optimization algorithm to reduce crosstalk in voltage feedback methods

  • Domínguez-Gimeno, Sergio
  • Igual Catalán, Raúl
  • Medrano Sánchez, Carlos
  • Plaza García, Inmaculada
Resistive sensor arrays (RSA) exhibit crosstalk between adjacent cells. The issues mainly related to parasitic coupling (crosstalk) that needs to be reduced. This crosstalk is due to a double effect. Firstly, the impossibility of isolating a single sensor when its corresponding row and column are selected by means of switches. Secondly, the internal resistances of these switches also affect sensor measurement. Several readout circuits have been proposed to neutralize the first effect. Two of the most relevant circuits are called the zero potential method (ZPM) and the voltage feedback method (VFM). However, these circuits do not correct the second effect. To solve this, in a previous study a least-square algorithm was successfully applied to the ZPM circuit. This paper applies the same algorithm to the VFM circuit, showing its generalization ability to comprehensively correct crosstalk. Results show that this optimization approach is suitable for several RSA readout circuits.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sensor Arrays: A Comprehensive Systematic Review

  • Domínguez-Gimeno, Sergio
  • Igual-Catalán, Raúl
  • Plaza-García, Inmaculada
Sensor arrays are arrangements of sensors that follow a certain pattern, usually in a row–column distribution. This study presents a systematic review on sensor arrays. For this purpose, several systematic searches of recent studies covering a period of 10 years were performed. As a result of these searches, 361 papers have been analyzed in detail. The most relevant aspects for sensor array design have been studied. In relation to sensing technologies, different categories were identified: resistive/piezoresistive, capacitive, inductive, diode-based, transistor-based, triboelectric, fiber optic, Hall effect-based, piezoelectric, and bioimpedance-based. Other aspects of sensor array design have also been analyzed: applications, validation experiments, software used for sensor array data analysis, sensor array characteristics, and performance metrics. For each aspect, the studies were classified into different subcategories. As a result of this analysis, different emerging technologies and future research challenges in sensor arrays were identified.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A new approach for real-time center-of-pressure correction in pressure sensitive mats using feedforward neural networks

  • Domínguez Gimeno, Sergio
  • Igual Catalán, Raúl
  • Medrano Sánchez, Carlos
  • Plaza García, Inmaculada
  • Martínez Cesteros, Javier
  • Pasetti, Marco
Center-of-pressure (CoP) is a good clinical indicator in balance tests and fall-risk assessment. It can be detected using pressure sensitive mats (PSMs), which are affordable. However, these can suffer from certain nonidealities, such as hysteresis and creep. These effects have been assessed in literature. However, proposed algorithms have low computation speed and are complex. In this work, a completely new approach based on feedforward neural networks (FFNNs) is proposed with the goal of correcting the CoP given by PSMs, allowing real-time correction. Its performance is compared in terms of error and computation times with a state-of-the-art model, which corrects for hysteresis and creep in the PSM. Results show that FFNN can correct for the CoP measurements, providing a good accuracy-speed balance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Characterization and Comparison of Piezoresistive Materials and Their Performance on Pressure-Sensitive Mats

  • Martínez-Cesteros, Javier
  • Domínguez-Gimeno, Sergio
  • Castellanos-Ramos, Julián
  • Sánchez-Durán, José A.
  • Medrano-Sánchez, Carlos
The response of three readily available low-cost piezoresistive materials (EeonTex, Ex-Static, and Velostat) and their performance on a specific application were studied in this work. First, a series of pressure cycles was applied with a pneumatic platform on piezoresistive sensors based on them. These experiments allowed quantifying several nonidealities: Variability, drift, creep, hysteresis, nonlinearity, and response time. An overview radar chart showed that hysteresis, variability, and response time were quantitatively more relevant and different between the materials. Then, pressure-sensitive mats (PSMs) were manufactured using each of those three materials. They were evaluated by measuring the center of pressure (CoP) in stability tests. A force platform (FP) served as a reference instrument. The best performance in this kind of experiment was obtained by the Velostat-based mat (trajectory distance of 0.021 versus 0.035 and 0.045 cm/sample for Ex-Static-based and EeonTexbased mats, respectively). This material also showed less response time (0.21 versus 0.42 and 0.50 s for Ex-Static and EeonTex, respectively) and hysteresis (0.11 versus 0.21 and 0.23 S/S for EeonTex and Ex-Static, respectively), although its variability was larger (0.137 versus 0.065 and 0.059 S/S for Ex-Static and EeonTex, respectively). These results indicate that response time and hysteresis have a major influence on the determination of the CoP. Further research should focus on compensating for these effects or finding sensor configurations that minimize them.