Pasar al contenido principal

MATERIALES MAGNETICOS Y QUIRALES BASADOS EN CARBONO VIA SINTESIS EN SUPERFICIE

PID2023-146801NB-C33

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Diastereomeric configuration drives an on-surface specific rearrangement into low bandgap non-benzenoid graphene nanoribbons

  • Villalobos, Federico
  • Mendieta-Moreno, Jesús I.
  • Lobo, Jorge M.
  • Morcillo, Sara P.
  • Martínez, José I.
  • Gómez-Fernández, José María
  • Andrés, Pedro L. de
  • Martín-Gago, José A.
  • Cuerva, Juan M.
  • Campaña, Araceli G.
  • Sánchez-Sánchez, Carlos
Stereochemistry, usually associated with the three-dimensional arrangement of atoms in molecules, is crucial in processes like life functions, drug action, or molecular reactions. This three-dimensionality typically originates from sp3 hybridization in organic molecules, but it is also present in out-of-plane sp2-based molecules as a consequence of helical structures, twisting processes, and/or the presence of nonbenzenoid rings, the latter significantly influencing their global stereochemistry and leading to the emergence of new exotic properties. In this sense, on-surface synthesis methodologies provide the perfect framework for the precise synthesis and characterization of organic systems at the atomic scale, allowing for the accurate assessment of the associated stereochemical effects. In this work, we demonstrate the importance of the initial diastereomeric configuration in the surface-induced skeletal rearrangement of a substituted cyclooctatetraene (COT) moiety–a historical landmark in the understanding of aromaticity–into a cyclopenta[c,d]azulene (CPA) one in a chevron-like graphene nanoribbon (GNR). These findings are evidenced by combining bond-resolved scanning tunneling microscopy with theoretical ab initio calculations. Interestingly, the major well-defined product, a CPA chevron-like GNR, exhibits the lowest bandgap reported to date for an all-carbon chevron-like GNR, as evidenced by scanning tunneling spectroscopy measurements. This work paves the way for the rational application of stereochemistry in the on-surface synthesis of novel graphene-based nanostructures., We acknowledge financial support from grants PID2021-127521NB-I00, PID2020-113142RB-C21, PID2022-138750NB-C21, PID2023-146801NB-C31, PID2023-146801NB-C33 funded by MICIN/AEI/10.13039/501100011033 and by ERDF/EU, grants PLEC2021-007906 and TED2021-129999B–C31 funded by MICIN/AEI/10.13039/501100011033 and the “European Union Next Generation EU/PRTR”, by the Comunidad de Madrid via Programa de Investigación Tecnologías 2018 (FOTOART-CM S2018/NMT-4367) and Programa Ayudas realización proyectos sinérgicos (FOTOSURF-CM, Y2020/NMT-6469), by the regional Governments of Aragon (E12_23R). F.V. acknowledges financial support from Ministerio de Universidades (FPU18/05938). We further acknowledge the use of Servicio General de Apoyo a la Investigación-SAI and the Laboratorio de Microscopías Avanzadas of the Universidad de Zaragoza. J.I.M.M acknowledges grant HORIZON-MSCA-2021-PF-101065707., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the substrate in the on-surface synthesis and air stability of 1D metal-organic oligomers

  • Gómez-Fernández, José María
  • Martínez, José I.
  • Zamalloa-Serrano, Jorge Manuel
  • Naranjo, T.
  • López-Calixto, C. G.
  • Schio, L.
  • Floreano, L.
  • Mendieta-Moreno, J. I.
  • Palacio, Irene
  • Peña O'Shea, Víctor A. de la
  • Liras, Marta
  • Martín-Gago, José A.
  • López, María Francisca
  • Sánchez-Sánchez, Carlos
The development of applicable functional materials currently stands as one of the main challenges in the field of on-surface synthesis. In this direction, it is necessary to understand their stability in real conditions, what it is known as bridging the pressure gap. Interestingly, although it is well-established that the on-surface synthesis will be highly influenced by the selected substrate, little is known about the effect of the underlying substrate on the air stability of on-surface synthesized nanostructures. Applying an on-surface synthesis approach, we report a similar behavior in the synthesis of 1D metal–organic nanostructures based on a BOPHY photoactive molecule on two coinage metal surfaces, Au(1 1 1) and Ag(1 1 1), but a distinct air stability of these nanostructures when exposed to the atmospheric pressure due to the different catalytic properties of the substrates. In both cases, important comparative conclusions are extracted thanks to a combination of surface science characterization techniques with theoretical calculations. This study opens a door to the synthesis of low-dimensional photoactive materials with potential applications, emphasizing the critical role of the substrate not only in the synthesis process but also in the air stability of on-surface synthesized nanostructures., This work was supported by the S2018/NMT-4367, Y2020/NMT-6469, TEC-2024/TEC-308 and TEC-2024/TEC-459 projects funded by the “Comunidad de Madrid” and co-financed by European Structural Funds, and by grants PID2020-113142RB-C21, PID2023-146801NB-C33, PID2023-149077OB-C31, PID2021-12509OA-I00, TED2021-129999B-C31, TED2021-129416A-I00, PLEC2021-007906 and RED2022-134503-T funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, by “ERDF/EU” and the “European Union NextGenerationEU/ PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effects of Ti doping on blister suppression in sputter grown hafnium oxide thin films

  • Álvarez-Fraga, Leo
  • Jesús Araiza, J. de
  • Gago, Raúl
  • Méndez, Javier
  • Sánchez Garrido, Olga
In this work, we report a simple and cost-effective strategy to suppress blistering in hafnia (HfO₂)-based thin films deposited by DC magnetron co-sputtering at room temperature. In particular, we report the influence of titanium (Ti) incorporation (HfOₓ:Ti) with focus on the structural, optical, and morphological properties. Rutherford backscattering spectrometry (RBS) reveals Ti contents increasing from 5 to 7 at% by raising the power applied to the Ti cathode. Atomic force microscopy (AFM) and scanning electron microscopy show pronounced blistering in pure HfOₓ films, whereas the introduction of a small Ti fraction alters film compactness and progressively suppresses blister formation. The evolution of blister distribution and its effect on surface roughness are systematically investigated as a function of Ti content by AFM, demonstrating significant morphological changes with only a minor variation in the Ti concentration. X-ray diffraction indicates that Ti doping induces amorphization of the monoclinic HfO₂ phase, shifting the residual stress from compressive to tensile. Such structural transition is strongly correlated with the observed morphological modifications. Regarding optical properties, all samples show an average transmittance of approximately 80 % in the visible range, while the optical band gap decreases with increasing Ti content. In addition, spectroscopic ellipsometry (SE) further confirms the band-gap trend and reveals the tunable optical constants as a function of the Ti level. © 2025, This research was funded by grant TED2021–129876B-I00 of the Ministerio de Ciencia, Innovación y Universidades (Spain).The authors acknowledge the service from the MiNa Laboratory at IMN and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13–4E-1794) and EU (FEDER, FSE). J.d.J.A., acknowledges the support by CONAHCYT-MX through Announcement2022 for a sabbatical stay for consolidation of research groups 2022–2023. J.M. acknowledges funding from MINECO (project PID2023–146801NB-C33)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electronic properties of on-surface synthesized (4,1,4) chiral graphene nanoribbons

  • Deniz, Okan
  • Sánchez-Sánchez, Carlos
  • Chen, Qiang
  • Shinde, Prashant
  • Pignedoli, Carlo A.
  • Liu, Junzhi
  • Feng, Xinliang
  • Narita, Akimitsu
  • Müllen, Klaus
  • Fasel, Román
  • Passerone, Daniele
  • Ruffieux, Pascal
Chiral graphene nanoribbons offer a versatile playground to control electronic and magnetic prop-erties in a one-dimensional graphene nanostructure. Here, we report the on-surface synthesis of (4,1,4) chiral graphene nanoribbons (chGNRs) and characterize their structure, edge states and band gaps using scanning probe techniques and DFT simulations, the latter revealing a critical dependence on the environment of the electronic and magnetic properties of (4,1,4)-chGNRs. While gas phase calculations predict an open-shell ground state, the influence of the metallic substrate upon adsorption modifies the electronic properties as predicted by GW calculations. In this theoretical frame, the experimental band gap of surface-supported (4,1,4)-chGNRs can only be reproduced assuming a closed-shell configuration., This research was supported by the Swiss National Science Foundation under Grant No. 200020_187617 and 200020_212875, the NCCR MARVEL, a National Centre of Competence in Research funded by the Swiss National Science Foundation (grant No. 205602), the Max Plank Society, and the projects PID2020-113142RB-C21, PID2023-146801NB-C33 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF/EU”., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Diastereomeric configuration drives an on-surface specific rearrangement into low bandgap Non-Benzenoid Graphene Nanoribbons

  • Villalobos, Federico
  • Mendieta-Moreno, Jesús I.
  • Lobo-Checa, Jorge
  • Morcillo, Sara P.
  • Martínez, José I.
  • Gómez-Fernández, José María
  • de Andres, Pedro L.
  • Martín-Gago, José A.
  • Cuerva, Juan M.
  • Campaña, Araceli G.
  • Sánchez-Sánchez, Carlos
Stereochemistry, usually associated with the three-dimensional arrangement of atoms in molecules, is crucial in processes like life functions, drug action, or molecular reactions. This three-dimensionality typically originates from sp3 hybridization in organic molecules, but it is also present in out-of-plane sp2-based molecules as a consequence of helical structures, twisting processes, and/or the presence of nonbenzenoid rings, the latter significantly influencing their global stereochemistry and leading to the emergence of new exotic properties. In this sense, on-surface synthesis methodologies provide the perfect framework for the precise synthesis and characterization of organic systems at the atomic scale, allowing for the accurate assessment of the associated stereochemical effects. In this work, we demonstrate the importance of the initial diastereomeric configuration in the surface-induced skeletal rearrangement of a substituted cyclooctatetraene (COT) moiety–a historical landmark in the understanding of aromaticity–into a cyclopenta[c,d]azulene (CPA) one in a chevron-like graphene nanoribbon (GNR). These findings are evidenced by combining bond-resolved scanning tunneling microscopy with theoretical ab initio calculations. Interestingly, the major well-defined product, a CPA chevron-like GNR, exhibits the lowest bandgap reported to date for an all-carbon chevron-like GNR, as evidenced by scanning tunneling spectroscopy measurements. This work paves the way for the rational application of stereochemistry in the on-surface synthesis of novel graphene-based nanostructures.