Pasar al contenido principal

DISPOSITIVOS DE ELECTRONICA ORGANICA: DESDE MATERIALES DE ALTO RENDIMIENTO A APLICACIONES AVANZADAS

RED2022-134503-T

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Redes Investigación /Redes Excelencia
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Covalent organic frameworks as nanocarriers of tailored BODIPY for phototheragnostic applications

  • Jimenez-Duro, Miguel
  • Soler-Beatty, Jennifer
  • Martinez-Fernandez, Marcos
  • Avellanal-Zaballa, Edurne
  • Martinez, Jose I.
  • Ortiz, Maria J.
  • Duran-Sampedro, Gonzalo
  • Banuelos, Jorge
  • Segura, Jose L.
  • Soriano-Teruel, Paula
  • García-Fernández, Alba|||0000-0002-8416-1674
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
[EN] Grafting fluorophores and photosensitizers onto nanocarriers is recognized as an effective strategy for fluorescent bioimaging and photodynamic therapy. This approach enhances targeted drug delivery to tumor sites, while improving the biocompatibility and stability of poorly water-soluble bioprobes, thereby reducing side effects. Among the available organic dyes and nanoparticles, BODIPY and COF stand out as a compatible pair for this purpose. To leverage the COF-BODIPY scaffold as a photoactive platform for biomedical applications, we have optimized their integration. To this aim, first, BODIPY units were functionalized to enable strong binding to specific sites of the COF via click chemistry, positioning the BODIPY within the pores of the COF. Following this approach, BODIPY derivatives photoactive across different spectral regions (from the green to the red window) were straightforwardly grafted onto the COF. The structural and photophysical properties of these nanomaterials were thoroughly characterized. Notably, the COF bearing styrylated and iodinated BODIPY was especially appealing due to its dual photonic performance, enabling both singlet oxygen generation and red fluorescence under long-wavelength excitation. Upon its cellular uptake by human melanoma cells, this dyed nanoparticle selectively stained lysosomes, and at the same time triggered a cytotoxic response to induce cell death under illumination with red light, thus being a suitable candidate for theragnostic purposes., This research was supported by projects: TED2021-129886B-C43 granted by MCIN/AEI/10.13039/501100011033 and the European Union NextGeneration EU/PRTR; PID2021-128141OB-C22 and PID2021-126304OB-C41 funded by MCIN/AEI/10.13039/501100011033/and by European Regional Development Fund - A way of doing Europe; PID2022-138908NB-C33 and PID2024-157648-NB-C22 granted by MICIU/AEI/10.13039/501100011033 and FEDER, UE. This study was also supported by Generalitat Valenciana (CIPROM/2021/007) and Gobierno Vasco (IT1639-22). The work was supported by CIBER -Consorcio Centro de Investigacion Biomedica en Red- (CB06/01/2012), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion. J. L. S. acknowledges the MICIIN for the REDES project "RED2022-134503-T". P. M. S-T. is grateful to the Generalitat Valenciana for a postdoctoral Investigo contract (INVEST/2023/443). J. I. M. acknowledges funding from Spanish MCIN (Grants PID2023-149077OB-C31, TED2021-12941A-I00 and PLEC2021-007906 funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR"), and Comunidad de Madrid (Grant TEC-2024/TEC-459). The Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S is also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bimodal Atomic Force Microscopy with a Torsional Eigenmode for Highly Accurate Imaging of Grain Orientation in Organic Thin Films

  • Arilla, Rodrigo
  • Barrena, Esther
  • Ocal, Carmen
  • Martín-Jiménez, Daniel
Tiene un dataset asociado, con el mismo título., In organic electronics, the nature and spatial distribution of grains in polycrystalline thin films of small organic semiconductor molecules greatly impact the electronic properties of devices. Therefore, tools that accurately characterize organic films at the mesoscopic level are essential. To this end, we demonstrate here the power of a bimodal atomic force microscopy (AFM) with a torsional eigenmode for highly accurate imaging of grain orientations in organic thin films. The energy dissipated between the tip and sample during scanning depends on the in-plane crystalline orientation of each grain. This fact alters the cantilever torsional observables, allowing grain orientation recognition. Remarkably, bimodal AFM with the torsional eigenmode has important advantages, such as high sensitivity in the applied forces, true molecular resolution, and multiple parameters for regulating the image contrast, making it competitive with other well-established AFM methods for grain detection in organic thin films, namely, friction force microscopy and transverse shear microscopy., We acknowledge funding from European Union under the Horizon Europe Marie Sklodowska-Curie Actions (project TORNADE, grant agreement no. 101106103). We acknowledge the Spanish “Ministerio de Ciencia, Innovación y Universidades” (MCIU), “Agencia Estatal de Investigación” (AEI), European Social Fund Plus (ESF+), and European Regional Development Fund (ERDF) for funding under projects PID2022-136802NB-I00 (MCIU/AEI/ERDF), RED2022-134503-T (MCIU/AEI), and PTA2023-023267-I (MCIU/AEI/ESF+). This study is part of the Advanced Materials programme (Project InCAEM) that is partially supported by the Spanish MCIU with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. We also acknowledge the AEI through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the substrate in the on-surface synthesis and air stability of 1D metal-organic oligomers

  • Gómez-Fernández, José María
  • Martínez, José I.
  • Zamalloa-Serrano, Jorge Manuel
  • Naranjo, T.
  • López-Calixto, C. G.
  • Schio, L.
  • Floreano, L.
  • Mendieta-Moreno, J. I.
  • Palacio, Irene
  • Peña O'Shea, Víctor A. de la
  • Liras, Marta
  • Martín-Gago, José A.
  • López, María Francisca
  • Sánchez-Sánchez, Carlos
The development of applicable functional materials currently stands as one of the main challenges in the field of on-surface synthesis. In this direction, it is necessary to understand their stability in real conditions, what it is known as bridging the pressure gap. Interestingly, although it is well-established that the on-surface synthesis will be highly influenced by the selected substrate, little is known about the effect of the underlying substrate on the air stability of on-surface synthesized nanostructures. Applying an on-surface synthesis approach, we report a similar behavior in the synthesis of 1D metal–organic nanostructures based on a BOPHY photoactive molecule on two coinage metal surfaces, Au(1 1 1) and Ag(1 1 1), but a distinct air stability of these nanostructures when exposed to the atmospheric pressure due to the different catalytic properties of the substrates. In both cases, important comparative conclusions are extracted thanks to a combination of surface science characterization techniques with theoretical calculations. This study opens a door to the synthesis of low-dimensional photoactive materials with potential applications, emphasizing the critical role of the substrate not only in the synthesis process but also in the air stability of on-surface synthesized nanostructures., This work was supported by the S2018/NMT-4367, Y2020/NMT-6469, TEC-2024/TEC-308 and TEC-2024/TEC-459 projects funded by the “Comunidad de Madrid” and co-financed by European Structural Funds, and by grants PID2020-113142RB-C21, PID2023-146801NB-C33, PID2023-149077OB-C31, PID2021-12509OA-I00, TED2021-129999B-C31, TED2021-129416A-I00, PLEC2021-007906 and RED2022-134503-T funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, by “ERDF/EU” and the “European Union NextGenerationEU/ PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Core and end-capped engineering as a powerful tool in the search of long-term high-performance dye-sensitized solar cells

  • Alonso-Navarro, Matías J.
  • Franco, Santiago
  • Suárez-Blas, Fátima
  • Andreu, Raquel
  • Orduna, Jesús
  • Ramos, M. Mar
  • Segura, José L.
The data that support the findings of this study are available from the corresponding author upon reasonable request., In the search of new electroactive organic dyes in dye-sensitized solar cells technology, a series of D-π-A assemblies, named as TA-BTD-CNCOOH, OMeTA-BTD-CNCOOH, TA-Y6-CNCOOH, and OMeTA-Y6-CNCOOH is rationally designed and synthesized, in which precise modifications have been carried out in order to obtain structure-performance relations in the field of dye-sensitized solar cells. After careful evaluation of the photophysical and electrochemical properties of these semiconductors, these systems are applied as active materials, showing high performance with power conversion efficiency maximum values of 9.05% and 18.5% for outdoor and indoor conditions, respectively. In addition, the best material of these organic architectures, TA-BTD-CNCOOH, shows an excellent long-term stability, up to 3,360 h, with no significant variance in its performance over time., This work was financially supported by the MICINN (PID2022-138908NB-C33, TED2021-129886BC43, RED2022-134503-T and Grant CEX2023-001286-S funded by MICIU/AEI /10.13039/501100011033), Comunidad de Madrid (TEC-2024/ECO-332), Gobierno de Aragón (E47_23R), the University of Zaragoza (UZ2023-CIE01), the UCM (INV.GR.00.1819.10759) and the URJC ((2024/SOLCON-138169). M.J.A.-N. and F.S.-B. gratefully acknowledge Universidad Rey Juan Carlos for his postdoctoral contract and her predoctoral contract respectively., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gate-Dielectric Surface Engineering With Fluorinated Monolayers: Minimizing Contact Resistance and Nonidealities in OFETs

  • Mesforush, Shaghayegh
  • Cazorla, Alba
  • Melville, Hayley
  • Blanchard, Philippe
  • Klauk, Hagen
  • Zschieschang, Ute
  • Zhang, Min
  • Fijahi, Lamiaa
  • Mas Torrent, Marta
  • Barrena, Esther
Organic field-effect transistors (OFETs) hold great potential for flexible, large-area electronics, but face challenges related to hysteresis in the transfer characteristics, contact resistance, and charge trapping. This study examines the growth and electrical properties of 2-decyl-7-phenyl[1]benzothieno[3,2-b][1]benzothiophene (Ph-BTBT-10) organic-semiconductor films on Al 2 O 3 as gate dielectric, focusing on the effects of surface functionalization with a self-assembled monolayer (SAM) of either a non-fluorinated or a more or less strongly fluorinated phosphonic acid. This functionalization of the gate dielectric surface is found not to significantly affect the structural organization of Ph-BTBT-10 thin films grown at room temperature. Thin films grown at room temperature exhibit a single-layer lamella with a step height of 26.7 & Aring;, although there is evidence of a bilayer arrangement at the semiconductor-dielectric interface. Remarkably, the use of Al 2 O 3 functionalized with a fluorinated SAM leads to significant improvements in OFET performance, including near-zero threshold voltages, reduced hysteresis, reduced contact resistance, and more ideal electrical characteristics compared to bare Al 2 O 3. This work highlights the significant yet non-trivial benefits of gate-dielectric surface functionalization in reducing contact resistance and mitigating non-ideal behaviors in OFETs, offering an alternative to traditional approaches like contact doping or functionalization of the source/drain contacts in bottom-contact organic thin-film transistors (TFTs)., This work was funded by the Spanish Ministry of Science and Innovation (MCIN) and State Investigation Agency (AEI) under project PID2022-136802NB-I00 and RED2022-134503-T funded by MICIU/AEI/10.13039/ 501100011033 and FEDER, UE, and through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S). This study is part of the Advanced Materials programme (In-CAEM project) and was partially supported by the MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. This work was carried out within the framework of the doctoral PhD program of Material Science, Department of Physics of the Universitat Autonoma de Barcelona (UAB). M.M. thanks financial funding by MCIN/AEI/10.13039/501100011033/ERDF, UE with project SENSATION PID2022-141393OB-I00, and by the Generalitat de Catalunya (2021-SGR-00443). M.Z. acknowledges her CSC fellowship. The authors also thank European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 811284 (UHMob)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phase Transformations in Evaporated Ph-BTBT-10 Thin Films and Impact on the Device Performance

  • Fijahi, Lamiaa
  • Yan, Shunya
  • James, Ann Maria
  • Zhang, Min
  • Cazorla, Alba
  • Tamayo, Adrián
  • Li, Jinghai
  • Ocal, Carmen
  • Barrena, Esther
  • Resel, Roland
  • Mas Torrent, Marta
This paper reports on the phase transformation occurring in evaporated thin films of the organic semiconductor 2-decyl-7-phenyl[1]benzothieno[3,2-b][1]benzothiophene (Ph-BTBT-10), along with its impact on the performance of organic thin-film field-effect transistors (OFETs). Temperature-dependent X-ray reflectivity (XRR) studies reveal that the films crystallize in a single-layer structure, which converts to a bilayer phase in the temperature range of 110°C –140°C; at further elevated temperatures, a liquid-crystal phase is formed. The conversion of the as-evaporated films to the bilayer structure is investigated by atomic force microscopy (AFM) and Kelvin probe force microscopy (KPFM) at specific annealing temperatures. The combination of XRR, AFM, and KPFM points out that only at the higher annealing temperature the phase transformation is completed. In a subsequent stage, the films are investigated as active layers in OFETs. An enhanced performance is observed in the annealed films with a higher mobility and reduced level of charge traps. The best electrical characteristics are realized when the bilayer transformation is fully accomplished., This work was funded by European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 811284 (UHMob) and by MCIN/AEI/10.13039/501100011033/ERDF, UE with projects SENSATION PID2022-141393OB-I00, RED2022-134503-T, and PDC2022-133750-I00, and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (CEX2023-001263-S). The authors also thank Generalitat de Catalunya (2021-SGR-00443). This study is part of the Advanced Materials programme (In-CAEM project) and is partially supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1). M.Z. and S.Y. are financially supported by the China Scholarship Council (CSC) under Grant No. 202006990034. This work has been carried out within the framework of the doctoral PhD program of Material Science of the Universitat Autònoma de Barcelona (UAB)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stimuli responsive behavior in a D-A-D organic fluorophore: the role of cold crystallization

  • Uddin, M. Afsar
  • Gámez-Valenzuela, S.
  • Ruiz Delgado, M.C.
  • Gómez-Lor, Berta
Herein, dimethyl-4,7-di(2-thienyl)-2,1,3-benzothiadiazole-5,6-dicarboxylate (DTBTE) is introduced as a highly efficient fluorophore with multi-stimuli responsive properties. Its molecular structure, consisting of a benzothiadiazole (BTD) core functionalized with ester groups and thiophene rings, results in a highly flexible framework with dynamic conformational behavior and low rotational barriers. These characteristics allow DTBTE to exhibit cold crystallization at 80 °C, accompanied by a pronounced and reversible color change. This transition can be reversed, restoring the amorphous state via external stimuli such as solvent fuming or mechanical shearing. Density functional theory (DFT) calculations, combined with advanced characterization techniques such as single-crystal X-ray analysis and IR and Raman spectroscopy, provide detailed insight into the mechanisms driving the phase transformations and their associated color changes. In particular, the flexibility of the ester groups plays a crucial role in enabling cold crystallization, as it facilitates the formation of a complex hydrogen bond network. Additionally, the switchable emission colours are attributed to cis/trans conformational changes in the thiophene groups during the transition between the crystalline and the amorphous phases. These findings highlight DTBTE as a promising platform for designing efficient stimuli-responsive materials and provide valuable guidelines for the development of new fluorophores exhibiting a dynamic behavior. © 2025 The Royal Society of Chemistry., This research was funded by MCIN/AEI/10.13039/501100011033 (project PID2022-139548NB-I00, PID2023-150022NB-I00), and by Junta de Andalucı´a (P09FQM-4708 and P18-FR-4559). MAU thanks to Spanish Ministry of Science, Innovation and Universities for RAMO´N Y CAJAL 2021 fellowship (Project RYC2021- 034211-I) and CSIC for ATRACCIO´N DE TALENTO RAMO´N Y CAJAL 2021 (Project 20236AT033). The authors would like to thank the computer resources, technical expertise and assistance provided by the SCBI (Supercomputing and Bioinformatics) center and the vibrational spectroscopy (EVI) lab of the Research Central Services (SCAI) of the University of Ma´laga. The authors acknowledge the support of SCXRD Laboratory at SIdI - Universidad Auto´noma de Madrid. The equipment used was funded by MCINN/AEI/10.13039/501100011033 NextGenerationEU/ PRTR (EQC2021-007518-P). The authors also acknowledge the MICIN for the REDES project ‘‘RED2022-134503-T’’., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring the Magnetic Properties of 2D Metal-Organic Networks by Harnessing the Coordination Sphere

  • Mathialagan, S.K.
  • Parreiras, S.O.
  • Santos, J.
  • Martín-Fuentes, C.
  • Moreno, D.
  • Černa, L.
  • Tenorio, M.
  • Muñiz-Cano, B.
  • Lauwaet, K.
  • Valvidares, M.
  • Valbuena, M.A.
  • Urgel, J.I.
  • Kuch, W.
  • Gargiani, P.
  • Miranda, R.
  • Martínez, J. L.
  • Gallego, José M.
  • Martín, N.
  • Écija, D.
Achieving magnetic ordering in low-dimensional materials remains a key objective in the field of magnetism. Herein, coordination chemistry emerges as a powerful discipline to promote the stabilization of magnetism at the nanoscale. We present a thorough study of exemplary two-dimensional metal-organic nanoarchitectures synthesized on a Au(111) substrate, which are rationalized by using surface-science techniques and theoretical calculations. By tuning the stoichiometry, two distinct phases based on the same molecular linker coordinated with Co atoms are obtained, though featuring a different coordination sphere. Remarkably, our combined experimental and theoretical results suggest that for one phase the Co centers have an out-of-plane antiferromagnetic ground state, whereas for the other the Co atoms display in-plane antiferromagnetism. These results pave new avenues for designing two-dimensional (2D) metal-organic magnets and tailoring their inherent magnetic properties. © 2025 Wiley-VCH GmbH., Spanish MICINN and the Spanish Research Agency MICIN/AEI. Grant Numbers: PID2023-146373OB-I00, PID2022-136961NB-I00, PID2021-123776NB-C21, PID2023-149077OB-C31, PLEC2021-007906, RED2022-134503-T, TED2021-129416A-I00, PDC2023-145871-I00 Comunidad Autónoma de Madrid European Structural Funds ERC. Grant Numbers: ERC-2020–951224, ERC-2018-766555 Spanish Ministry of Science and Innovation. Grant Number: CEX2020-001039-S, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Post-synthetic engineering of covalent organic frameworks with thiophene and naphthalimide units for enhanced oxygen reduction electrocatalysis

  • Gala, E.
  • Martínez-Periñán, E.
  • Martínez-Fernández, M.
  • Gordo-Lozano, M.
  • Martínez, José I.
  • Segura, J.L.
The development of efficient metal-free electrocatalysts for the oxygen reduction reaction (ORR) is essential for advancing sustainable energy technologies. In this work, we report the post-synthetic functionalization of covalent organic frameworks (COFs) with donor–acceptor (D–A) motifs incorporating thiophene and naphthalimide derivatives, yielding two novel materials. These COFs were synthesized via CuAAC click chemistry and thoroughly characterized. Electrochemical analyses revealed enhanced ORR activity in both materials, with one COF exhibiting near-ideal four-electron selectivity and remarkable stability. Density functional theory (DFT) calculations corroborated the experimental results, demonstrating that the electronic structure of COFs facilitates efficient O–O bond cleavage and electron transfer. These findings underscore the potential of rationally designed D–A COFs as high-performance, metal-free ORR electrocatalysts, contributing to the development of next-generation sustainable energy conversion technologies. This journal is © the Partner Organisations, 2025, This work was financially supported by MICINN (PID2022-138908NB-C33, TED2021-129886BC43 and PID2022-142262OA-I00) and the UCM (INV.GR.00.1819.10759). J. L. S. acknowledge the MICINN for the REDES project “RED2022-134503-T” and the Comunidad de Madrid (TEC-2024/ECO-332)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interfacial adsorption and aggregation of 4H-pyranylidene dyes on TiO2: experimental–computational structure–function study for indoor dye-sensitized solar cells

  • Royo, Raquel
  • Andreu, Raquel
  • Mendieta-Moreno, Jesús I.
  • Martínez, José I.
  • Franco, Santiago
A series of D-π-A organic dyes incorporating a 4H-pyranylidene donor, a thiophene π–spacer, and a cyanoacrylic acid anchoring group were developed to investigate substituent-controlled interfacial organization on TiO2 photoanodes. The influence of bulky triisopropylsilyl (TIPS) and hydroxymethyl groups on adsorption strength, aggregation behavior, and charge-transfer dynamics was analyzed through combined experimental characterization and multiscale modeling. Periodic DFT calculations on anatase (101) and (0 0 1) surfaces reveal stronger adsorption and enhanced surface packing for hydroxymethyl derivatives, together with facet-dependent variations in adsorption energetics and surface relaxation, while molecular dynamics simulations correlate aggregate compactness with device performance. In dye-sensitized solar cells, TIPS-substituted dyes exhibit higher open-circuit voltages due to reduced recombination, whereas hydroxymethyl analogues provide higher photocurrents. Power conversion efficiencies reach 7.4% under AM 1.5G illumination and up to 14.9% under indoor lighting, with devices retaining their efficiency for over 1000 h of operation, demonstrating excellent long-term stability. A clear relationship between interfacial aggregation, recombination resistance, and photovoltaic response is established, highlighting the role of adsorption geometry and collective organization in governing interfacial charge-transfer processes. These results establish substituent engineering on the π-spacer as an effective strategy to control interfacial organization and stability in next-generation DSSCs for both outdoor and indoor applications., The work at the University of Zaragoza was financially supported by Gobierno de Aragón (E47_23R), the University of Zaragoza (UZ2023-CIE01) and The Severo Ochoa Centres of Excellence program through Grant CEX2023-001286-S funded by MICIU/AEI /10.13039/501100011033. R. Royo acknowledges for the financial support of Gobierno de Aragón: Fellowship program 2018–2022 period co-financed with the Operational Program FSE Aragón 2014-2022. J. I. Martínez acknowledges funding by MICIU (Grants PID2023-149077OB-C31, TED2021-12941A-I00 and PLEC2021-007906 funded by MCIN/AEI/10.13039/501100011033 and by the ’European Union NextGenerationEU/PRTR’), CAM (Grant SYNMOLMAT-CM: TEC-2024/TEC-459) and “The Severo Ochoa Centres of Excellence” program through Grant CEX2024-001445-S. Both research groups acknowledge the MICINN (RED2022-134503-T). J. I. Mendieta-Moreno acknowledges funding by the European Union (HORIZON-MSCA-2021-PF-101065707)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2024-001445-S),, Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Core and End‐Capped Engineering as a Powerful Tool in the Search of Long‐Term High‐Performance Dye‐Sensitized Solar Cells

  • Alonso-Navarro, Matías J.
  • Franco, Santiago
  • Suárez-Blas, Fátima
  • Andreu, Raquel
  • Orduna, Jesús
  • Ramos, M. Mar
  • Segura, José L.
In the search of new electroactive organic dyes in dye‐sensitized solar cells technology, a series of D‐π‐A assemblies, named as TA‐BTD‐CNCOOH, OMeTA‐BTD‐CNCOOH, TA‐Y6‐CNCOOH, and OMeTA‐Y6‐CNCOOH is rationally designed and synthesized, in which precise modifications have been carried out in order to obtain structure‐performance relations in the field of dye‐sensitized solar cells. After careful evaluation of the photophysical and electrochemical properties of these semiconductors, these systems are applied as active materials, showing high performance with power conversion efficiency maximum values of 9.05% and 18.5% for outdoor and indoor conditions, respectively. In addition, the best material of these organic architectures, TA‐BTD‐CNCOOH, shows an excellent long‐term stability, up to 3,360 h, with no significant variance in its performance over time.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Interfacial adsorption and aggregation of 4H-pyranylidene dyes on TiO2: experimental–computational structure–function study for indoor dye-sensitized solar cells

  • Royo, Raquel
  • Andreu, Raquel
  • Mendieta-Moreno, Jesús I.
  • Martínez, José I.
  • Franco, Santiago
A series of D-π-A organic dyes incorporating a 4H-pyranylidene donor, a thiophene π–spacer, and a cyanoacrylic acid anchoring group were developed to investigate substituent-controlled interfacial organization on TiO2 photoanodes. The influence of bulky triisopropylsilyl (TIPS) and hydroxymethyl groups on adsorption strength, aggregation behavior, and charge-transfer dynamics was analyzed through combined experimental characterization and multiscale modeling. Periodic DFT calculations on anatase (101) and (0 0 1) surfaces reveal stronger adsorption and enhanced surface packing for hydroxymethyl derivatives, together with facet-dependent variations in adsorption energetics and surface relaxation, while molecular dynamics simulations correlate aggregate compactness with device performance. In dye-sensitized solar cells, TIPS-substituted dyes exhibit higher open-circuit voltages due to reduced recombination, whereas hydroxymethyl analogues provide higher photocurrents. Power conversion efficiencies reach 7.4% under AM 1.5G illumination and up to 14.9% under indoor lighting, with devices retaining their efficiency for over 1000 h of operation, demonstrating excellent long-term stability. A clear relationship between interfacial aggregation, recombination resistance, and photovoltaic response is established, highlighting the role of adsorption geometry and collective organization in governing interfacial charge-transfer processes. These results establish substituent engineering on the π-spacer as an effective strategy to control interfacial organization and stability in next-generation DSSCs for both outdoor and indoor applications.