Pasar al contenido principal

MATERIALES MICROESTRUCTURADOS PARA DISPOSITIVOS DE FOTONICA INTEGRADA

PID2021-123163OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Clústeres Octaédricos de Molibdeno y Tántalo con Haluros y sus Híbridos Nanoestructurados: Aplicaciones en Fotosíntesis Artificial

  • Hernandez-Niño, Jhon Sebastian|||0000-0002-6550-7107
[ES] Esta tesis doctoral describe la síntesis y caracterización de materiales basados en clústeres octaédricos de metales de transición (M6) y en sus híbridos con soportes grafíticos, tales como nitruros de carbono dopados y óxido de grafeno, así como en su aplicación en procesos de fotosíntesis artificial. En cuanto a los clústeres metálicos, esta tesis se centra en clústeres de molibdeno hexanucleares con ligandos internos yoduro y ligandos apicales carboxilato y su evaluación en la reacción de fotorreducción del CO2, así como clústeres hexanucleares de tántalo con ligandos internos bromuro y ligandos apicales aqua y su evaluación en la reacción de fotorreducción de agua. El capítulo I consiste en una introducción sobre el desarrollo de la fotosíntesis artificial y en la química de clústeres metálicos, con especial énfasis en los clústeres octaédricos de molibdeno y tántalo en los procesos de fotorreducción de dióxido de carbono y separación fotocatalítica del agua. A continuación, en el capítulo II se enumeran los objetivos de la investigación. El capítulo III describe detalladamente todos los procedimientos de síntesis para la obtención de los materiales fotocatalíticos y las técnicas instrumentales, tanto de caracterización como de seguimiento de las reacciones, que se utilizaron a lo largo de esta tesis doctoral. El capítulo IV consiste en los resultados derivados de la síntesis y caracterización de los clústeres de molibdeno inmovilizados en nitruro de carbono dopado con hierro y su posterior evaluación en la reacción de fotorreducción del dióxido de carbono. Aquí se evaluó la efectividad y selectividad de estos sistemas hacia la obtención principalmente de monóxido de carbono y metano. Se obtuvieron rendimientos considerablemente superiores respecto de materiales similares a los reportados en la literatura. En el capítulo V se describen los resultados derivados de la síntesis y caracterización de los clústeres octaédricos de tántalo y su posterior evaluación en fase líquida en la reacción de reducción de agua asistida por luz. En este capítulo se realizó la optimización de las condiciones de reacción para la obtención de hidrógeno molecular mediante la metodología de superficies de respuesta, que proporcionó la concentración idónea de HBr y metanol como aditivos utilizados en este sistema catalítico homogéneo. El capítulo VI, corresponde a los resultados derivados de la síntesis y caracterización de los clústeres de tántalo soportados en óxido de grafeno y su evaluación en la reacción de reducción del agua asistida por luz y en fase gas. De manera general, los materiales mostraron una elevada eficiencia, comparable con materiales similares reportados en la literatura para la generación de hidrógeno. Además, la reutilización de estos sólidos es posible hasta por 3 ciclos, con una ligera disminución de la actividad catalítica. En el capítulo VII se describen por primera vez las propiedades fotofísicas del clúster [{Ta6Bri12}Bra2(H2O)a4]·4H2O en agua y agua deuterada. Se explora la fotorreactividad con dadores y aceptores de electrones, con un énfasis especial en el O2 y se identifican las Especies Reactivas de Oxígeno (ROS) generadas tras la irradiación de luz en presencia de O2., [CA] Aquesta tesi doctoral descriu la síntesi i caracterització de materials basats en clústers octaèdrics de metalls de transició (M6) i en els seus híbrids amb suports grafítics, com ara nitrurs de carboni dopats i òxid de grafé, així com la seua aplicació en processos de fotosíntesi artificial. Pel que fa als clústers metàl·lics, aquesta tesi se centra en clústers hexanuclears de molibdè amb lligands interns iodur i lligands apicals carboxilat, i en la seua avaluació en la reacció de fotorreducció del CO2, així com en clústers hexanuclears de tàntal amb lligands interns bromur i lligands apicals aqua, i la seua avaluació en la reacció de fotorreducció de l'aigua. El capítol I consisteix en una introducció sobre el desenvolupament de la fotosíntesi artificial i en la química dels clústers metàl·lics, amb un èmfasi especial en els clústers octaèdrics de molibdè i de tàntal en els processos de fotorreducció del diòxid de carboni i en la separació fotocatalítica de l'aigua. A continuació, el capítol II recull els objectius de la investigació. El capítol III descriu detalladament tots els procediments de síntesi per a l'obtenció dels materials fotocatalítics, així com les tècniques instrumentals utilitzades tant per a la caracterització com per al seguiment de les reaccions al llarg d'aquesta tesi doctoral. El capítol IV presenta els resultats derivats de la síntesi i caracterització dels clústers de molibdè immobilitzats en nitrur de carboni dopat amb ferro i la seua posterior avaluació en la reacció de fotorreducció del diòxid de carboni. S'hi va avaluar l'eficàcia i la selectivitat d'aquests sistemes cap a l'obtenció principalment de monòxid de carboni i metà. Es van obtindre rendiments considerablement superiors als de materials similars reportats en la literatura. El capítol V descriu els resultats derivats de la síntesi i caracterització dels clústers octaèdrics de tàntal i la seua posterior avaluació en fase líquida en la reacció de reducció de l'aigua assistida per la llum. En aquest capítol es va optimitzar les condicions de reacció per a l'obtenció d'hidrogen molecular mitjançant la metodologia de superfícies de resposta, la qual va proporcionar la concentració òptima d'HBr i metanol com a additius utilitzats en aquest sistema catalític homogeni. El capítol VI correspon als resultats derivats de la síntesi i caracterització dels clústers de tàntal suportats en òxid de grafé i la seua avaluació en la reacció de reducció de l'aigua assistida per la llum i en fase gasosa. En termes generals, els materials van mostrar una elevada eficiència, comparable amb la de materials similars reportats en la literatura per a la generació d'hidrogen. A més, la reutilització d'aquests sòlids és possible fins a tres cicles, amb una lleugera disminució de l'activitat catalítica. En el capítol VII es descriuen per primera vegada les propietats fotofísiques del clúster [{Ta6Bri12}Bra2(H2O)a4]·4H2O en aigua i en aigua deuteriada. S'hi explora la fotorreactivitat amb donadors i acceptors d'electrons, amb un èmfasi especial en l'O2, i s'identifiquen les Espècies Reactives d'Oxigen (ROS) generades després de la irradiació amb llum en presència d'O2., [EN] This doctoral thesis describes the synthesis and characterization of materials based on octahedral transition-metal clusters (M6) and their hybrids with graphitic supports, such as doped carbon nitrides and graphene oxide, as well as their application in artificial photosynthesis processes. Regarding the metallic clusters, this thesis focuses on hexanuclear molybdenum clusters with internal iodide ligands and apical carboxylate ligands and their evaluation in the CO2 photoreduction reaction, as well as hexanuclear tantalum clusters with internal bromide ligands and apical aqua ligands and their evaluation in the photocatalytic water reduction reaction. Chapter I provides an introduction to the development of artificial photosynthesis and the chemistry of metal clusters, with special emphasis on octahedral molybdenum and tantalum clusters in photocatalytic CO2 reduction and water-splitting processes. Chapter II outlines the research objectives. Chapter III describes in detail all the synthetic procedures for obtaining the photocatalytic materials, as well as the instrumental techniques used for characterization and reaction monitoring throughout this doctoral work. Chapter IV presents the results from the synthesis and characterization of molybdenum clusters immobilized on iron-doped carbon nitride and their subsequent evaluation in the CO2 photoreduction reaction. The effectiveness and selectivity of these systems were assessed, focusing mainly on the production of carbon monoxide and methane. The yields obtained were considerably higher than those of similar materials reported in the literature. Chapter V presents the results derived from the synthesis and characterization of octahedral tantalum clusters and their subsequent evaluation in the light-assisted liquid-phase water reduction reaction. In this chapter, the reaction conditions were optimized for molecular hydrogen production using the response surface methodology, which provided the optimal concentration of HBr and methanol as additives in this homogeneous catalytic system. Chapter VI focuses on the results obtained from the synthesis and characterization of tantalum clusters supported on graphene oxide and their evaluation in the light-assisted gas-phase water reduction reaction. Overall, the materials exhibited high efficiency, comparable to similar systems reported in the literature for hydrogen generation. Furthermore, these solids could be reused for up to three cycles, with only a slight decrease in catalytic activity. Chapter VII reports, for the first time, the photophysical properties of the cluster [{Ta6Bri12}Bra2(H2O)a4]·4H2O in water and deuterated water. The photoreactivity with electron donors and acceptors was explored, with particular emphasis on O2, and the Reactive Oxygen Species (ROS) generated upon light irradiation in the presence of O2 were identified., Agradezco la financiación otorgada por el Programa Santiago Grisolía (Consejo Superior de Investigaciones Científicas y Generalitat Valenciana; proyecto GRISOLIA/2021/054). Además, también quiero agradecer al Ministerio de Ciencia e Innovación (proyectos TED2021-130963B-C21, PID2021-123163OB-I00) y programa Severo Ochoa (CEX2021-001230-S) financiados por MCIN/AEI/10.13039/501100011033/ y por el FEDER, “Una manera de hacer Europa.” Por supuesto: Al Instituto de Tecnología Química (ITQ UPV-CSIC) por permitir el desarrollo del mismo en sus instalaciones.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermal emission of hydrogenated amorphous silicon microspheres in the mid-infrared

  • Fenollosa Esteve, Roberto|||0000-0003-2758-9823
  • RAMIRO MANZANO, FERNANDO
[EN] Hydrogenated amorphous silicon microspheres feature a pronounced phononic peak around 2000 cm(-1) when they are thermally excited by means of a blue laser. This phononic signature corresponds to vibrational modes of silicon-hydrogen bonds and its emitted light can be coupled to Mie modes defined by the spherical cavity. The signal is apparently quite stable at moderate excitation intensities although there appeared some signs pointing to hydrides bonds reconfiguration and even hydrogen emission. Above a certain excitation threshold, a phase change from amorphous to poly-crystalline silicon occurs that preserves the good structural quality of the microspheres., This research was supported by the project MCIN/AEI/PID2021123163OB-I00, and the Severo Ochoa Centre of Excellence program (CEX2021-001230-S), Ministry for Science and Innovation (MCIN) of Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Octahedral Molybdenum Iodide Clusters Supported on Graphene for Resistive and Optical Gas Sensing

  • Casanova-Chafer, Juan
  • García-Aboal, Rocío
  • Llobet, Eduard
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • Feliz Rodriguez, Marta|||0000-0002-4429-0551
[EN] This paper reports for the first time a gas-sensitive nanohybrid based on octahedral molybdenum iodide clusters supported on graphene flakes (Mo-6@Graphene). The possibility of integrating this material into two different transducing schemes for gas sensing is proposed since the nanomaterial changes both its electrical resistivity and optical properties when exposed to gases and at room temperature. Particularly, when implemented in a chemoresistive device, the Mo-6@Graphene hybrid showed an outstanding sensing performance toward NO2, revealing a limit of quantification of about 10 ppb and excellent response repeatability (0.9% of relative error). While the Mo-6@Graphene chemoresistor was almost insensitive to NH3, the use of an optical transduction scheme (changes in photoluminescence) provided an outstanding detection of NH3 even for a low loading of Mo-6. Nevertheless, the photoluminescence was not affected by the presence of NO2. In addition, the hybrid material revealed high stability of its gas sensing properties over time and under ambient moisture. Computational chemistry calculations were performed to better understand these results, and plausible sensing mechanisms were presented accordingly. These results pave the way to develop a new generation of multi-parameter sensors in which electronic and optical interrogation techniques can be implemented simultaneously, advancing toward the realization of highly selective and orthogonal gas sensing., J.C.-C. gratefully thanks ICREA Academia (project: 2018 ICREA Academia-01-AJUT). This research was funded from project PID2021-123163OB-I00 funded by MCIN/AEI/10.13039/501100011033/and FEDER A way of making Europe, and Generalitat Valenciana (grant number AICO/2020/149) . This work was partially funded by MICINN and FEDER via grant no. RTI2018-101580-B-I00. E. L. was supported by the Catalan Institution for Research and Advanced Studies via the 2018 Edition of the ICREA Academia Award.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optoelectronic properties of octahedral molybdenum cluster-based materials at a single crystal level

  • Segura-Sanchis, Elena
  • Moreno Muñoz, Ana
  • RAMIRO MANZANO, FERNANDO
  • Fenollosa Esteve, Roberto|||0000-0003-2758-9823
  • Feliz Rodriguez, Marta|||0000-0002-4429-0551
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
[EN] The determination of the photocurrent and photoluminescence properties of single crystals composed by an H-bonded network of hydroxo Mo6X8 (X = Br, Cl) clusters, makes these materials promising in optoelectronics, sensing and photocatalysis., We would like to thank the technical team at the Instituto de Tecnologia Quimica for providing us all the facilities for all the characterization processes. This research was supported by the project PID2021-123163OB-I00 funded by MCIN/AEI/10.13039/501100011033/and FEDER A way of making Europe and Severo Ochoa Centre of Excellence Program (CEX2021-001230-S). F. R. M. acknowledges CSIC under the program: Ayudaspara la incorporacion de nuevos Cientificos Titulares (Grant No. 202280I200).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sunlight-Driven Green Synthesis of Platinum Nanoparticles From Double-Vacancy Halide Perovskite Precursors for Methanol Reforming

  • Chacón-Ruiz, Saray
  • Garcia-Baldovi, Hermenegildo
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • Mego, Kevin
  • Ruiz-Campos, Pedro
[EN] The development of synthetic procedures for preparing metal nanoparticles with controlled size using sunlight opens new avenues toward more sustainable methods with lower energy consumption. Herein, we propose the use of double-vacancy halide perovskites as precursors for engineering highly crystalline and small platinum nanoparticles (< 3 nm) under simulated sunlight irradiation, using low concentration of methanol as sacrificial agent at room temperature. The formation of Pt NP was dependent on the methanol concentration impacting in the final Pt particle size distribution and time formation. After purification, this narrow sized Pt NP were employed for the methanol reforming reaction, showing excellent activity after 4 h and high selectivity toward hydrogen production (4.18 mmol & centerdot;h(-1) of H-2), along with other carbon products such as CO (2.26 mmol & centerdot;h(-1)), CH4 (0.54 mmol & centerdot;h(-1)), CO2 (0.28 mmol & centerdot;h(-1)), and C-2 species (0.17 mmol & centerdot;h(-1))., This research was funded by the Spanish Ministry of Science and Innovation through MCIN/AEI/10.13039/501100011033/ and "FEDER a way of making Europe," and the Severo Ochoa Centre of Excellence program (CEX2021-001230-S). K.M. acknowledges the PRE2022-104119 grant for the project "Catalytic processes: Catalysis for energy and process intensification by applying instrumental tools to monitor chemical processes." S.C.R. is thankful to PR-H2CVAL4-C1-2022-0090 grant funded by Union Europea NextGenerationEU. P.A. received funding from the PID2021-123163OB-I00 grant, and H.G.B. was supported by the RYC2022-037287-I grant and PAID-06-23. We thank to the technical team at the Instituto de Tecnologia Quimica (ITQ) for their support in facilitating the characterizations.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient and Selective Photocatalytic Transformation of CO2 to CO with Mo6 Clusters Supported on Fe-Doped g-C3N4

  • Hernandez-Niño, Jhon Sebastian|||0000-0002-6550-7107
  • Feliz Rodriguez, Marta|||0000-0002-4429-0551
[EN] The carbon dioxide reduction reaction (CO2RR) driven by sunlight is expected to become a sustainable way of producing high-value compounds in the future. To achieve this goal, affordable and efficient photocatalysts still need to be discovered. In this work, we show that near-IR luminescent octahedral molybdenum iodido clusters decorated with isonicotinato ligands, (Bu4N)2[Mo6I8(O2CC5H4N)6] (Mo6), once combined with iron-doped carbon nitride (Fe-g-C3N4), provide the Mo6/Fe-g-C3N4 nanostructured materials, which are able to photocatalytically produce carbon monoxide (CO) from CO2 with high efficiency and selectivity. In a plausible mechanism, the Mo6 cluster acts as a photosensitizer, and its pyridine groups interact coordinatively with the embedded iron atoms, thus promoting the electronic conduction to the catalytic iron sites of the nanohybrid. The materials were characterized analytically, texturally, structurally, and spectroscopically using techniques such as inductively coupled plasma (ICP), specific surface area measurements, UV¿vis¿NIR diffuse reflectance spectra (DRS), powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM) coupled with energy-dispersive X-ray spectroscopy (EDS), and photoluminescence. The CO2RR studies showed that this association induces a change in the selectivity and a significant increase in CO production compared to that produced separately by the Mo clusters and graphitic precursors. Considering the versatility of this building block strategy for preparing multicomponent hybrid nanomaterials, molybdenum metal clusters are regarded as promising catalysts for creating eco-friendly and cost-effective photocatalysts for the CO2RR, The authors thank funding resources from the Spanish Ministry of Science and Innovation (TED2021-130963B-C21, PID2021-123163OB-I00 and CEX2021-001230-S grants) funded by MCIN/AEI/10.13039/501100011033/ and FEDER, "A way of making Europe." J.S.H. gratefully acknowledges to Programa Santiago Grisolia (Consejo Superior de Investigaciones Cientificas and Generalitat Valenciana; grant number GRISOLIA/2021/054). The authors thank the technical team at the Instituto de Tecnologia Quimica for providing us with all the facilities for all the characterizations, equipment, and instrumentation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

CsPbBr3 nanocrystals supported on a partially oxidized Ti2N MXene for photothermal CO2 conversion

  • Mego-de la Cruz, Froy Kevin
  • Emanuela Accardo
  • Garcia-Baldovi, Hermenegildo
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • Ruiz-Campos, Pedro
[EN] The development of new photo-thermal catalysts for the transformation of CO2 into fuels is of great interest, offering a clean and sustainable approach to reducing the carbon footprint. Herein, we present a novel hybrid material composed of a nanocrystalline metal halide perovskite (CsPbBr3) supported on a two-dimensional titanium nitride (Ti2N) MXene. Additionally, we demonstrate the importance of forming an external TiO2 layer through partial oxidation of the MXene (POM-Ti2N), which introduces catalytic centers and enhances photogenerated charge separation. Remarkable activity in the formation of CH4 and CO was observed, with yields of 321 mu mol g-1 and 480 mu mol g-1, respectively. The selectivity of the reaction was found to be temperature dependent. The mechanism was thoroughly investigated using XPS and photoluminescence studies. XPS analysis revealed a significant chemical interaction between the CsPbBr3 nanocrystals and the POM-Ti2N MXene after the formation of the composite. Photoluminescence measurements revealed a considerably shorter emission lifetime for the hybrid catalyst (tau ave = 1.73 ns) compared to that of the CsPbBr3 nanoparticles (tau ave = 25.32 ns), indicating strong interaction with the MXene. Furthermore, this research highlights the potential of combining metal halide perovskites with MXenes and the importance of controlling their interface for photo-thermal reactions., This research was funded by the Spanish Ministry of Science and Innovation through MCIN/AEI/10.13039/501100011033/and "FEDER a way of making Europe" and the Severo Ochoa Centre of Excellence program (CEX2021-001230-S). K. M. acknowledges the PRE2022-104119 grant for the project "Catalytic processes: catalysis for energy and process intensification by applying instrumental tools to monitor chemical processes." P. A. received funding from the PID2021-123163OB-I00 grant. H. G. B. was supported by the RYC2022-037287-I grant, PAID-06-23. Also, this research leading to these results has received funding from the European Union's Horizon Europe research and innovation programme (Project DAM4CO2, Double-Active Membranes for a sustainable CO2 cycle; HORIZON-EIC-2022-PATHFINDERCHALLENGES-01-Number: 101115488). We thank the technical team at the Instituto de Tecnologia Quimica (ITQ) for their support in facilitating the characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Lead-Free Perovskite Nanocrystals Decorating Graphene for Detecting Nerve Agents

  • Juan Casanova-Cháfer
  • García-Aboal, Rocío
  • Malik, Shuja Bashir
  • Llobet, Eduard
  • Mego-de la Cruz, Froy Kevin
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
[EN] Highly toxic chemical compounds known as chemical warfare agents (CWAs) present substantial threats to human health and safety. Their swift detection and identification play a critical role in preventing exposure and ensuring timely intervention. This work develops nanohybrids to detect dimethyl methylphosphonate (DMMP), a simulant gas for sarin compound, which is classified as a nerve agent. Specifically, two different compositions (Cs3Cu2Br5 and Cs2AgBiBr6) of lead-free perovskite nanocrystals (NCs) have been employed to decorate graphene. The sensitive films exhibit remarkable sensitivity to DMMP at the ppb range and under ambient temperature conditions. It is worth mentioning that this work reports for the first time the successful use of perovskite NCs for detecting DMMP. Besides, the sensing performance of both perovskites has been compared, revealing that Cs3Cu2Br5-decorated graphene outperforms Cs2AgBiBr6, offering up to a 4-fold improvement. The synthesis and decoration process are straightforward, industrially scalable, and inexpensive, while the use of lead-free perovskites leads to an environmentally friendly and harmless approach. These facts linked to a sensitive and reversible detection of DMMP at low concentrations pave the way for developing CWA gas sensors based on the use of lead-free perovskite NCs., We especially thank Xavier Blanch for his technical assistance with the gas-sensing measurements. J.C.-C. is supported by the Marie Sklodowska-Curie Postdoctoral Fellowship (Horizon Europe Programme) under grant agreement No. 101066282 "GREBOS". E.L. is supported by the Catalan Institute for Advanced Studies (ICREA) via the 2023 Edition of the ICREA Academia Award. This work was supported in part by the Marie Sklodowska-Curie Action (MSCA) Research and in part by the Innovation Staff Exchange (RISE) under Grant no. H2020-MSCA-RISE-2018-823895 "SENSOFT". This research was also funded by the ITQ though the project PID2021-123163OB-I00 funded by MCIN/AEI/10.13039/501100011033/and FEDER A way of making Europe and Severo Ochoa centre of excellence program (CEX2021-001230-S).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced CO&lt, sub&gt, 2&lt, /sub&gt, Sensing by Oxygen Plasma-Treated Perovskite-Graphene Nanocomposites

  • Casanova-Chafer, Juan
  • García-Aboal, Rocío
  • Llobet, Eduard
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
[EN] Carbon dioxide (CO2) is a major greenhouse gas responsible for global warming and climate change. The development of sensitive CO2 sensors is crucial for environmental and industrial applications. This paper presents a novel CO2 sensor based on perovskite nanocrystals immobilized on graphene and functionalized with oxygen plasma treatment. The impact of this post-treatment method was thoroughly investigated using various characterization techniques, including Raman spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The detection of CO2 at parts per million (ppm) levels demonstrated that the hybrids subjected to 5 min of oxygen plasma treatment exhibited a 3-fold improvement in sensing performance compared to untreated layers. Consequently, the CO2 sensing capability of the oxygen-treated samples showed a limit of detection and limit of quantification of 6.9 and 22.9 ppm, respectively. Furthermore, the influence of ambient moisture on the CO2 sensing performance was also evaluated, revealing a significant effect of oxygen plasma treatment., J.C.-C. is supported by Marie Sk & lstrok;odowska-Curie Individual Fellowship (Horizon Europe program) under grant agreement no. 101066282 "GREBOS". E.L. is supported by the Catalan Institute for Advanced Studies (ICREA) via the 2018 Edition of the ICREA Academia Award. This work was supported in part by the Marie Sk & lstrok;odowska-Curie Action (MSCA) Research and in part by the Innovation Staff Exchange (RISE) under grant no. H2020-MSCA-RISE-2018-823895 "SENSOFT". This research was also funded by the ITQ through the project PID2021-123163OB-I00 funded by MCIN/AEI/10.13039/501100011033 and FEDER A way of making Europe and Severo Ochoa Centre of Excellence program (CEX2021-001230-S).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mie scattering based measurements of the optical size of single spherical dielectric microparticles

  • Tribaldo, Isaac
  • Molezuelas-Ferreras, Martin
  • Cifuentes, Ángel
  • López, Cefe
  • Molina-Terriza, Gabriel
  • Fenollosa Esteve, Roberto|||0000-0003-2758-9823
[EN] The scattering of light by dielectric particles has significant implications for fields such as atmospheric science, optical sensing, and material characterization. We present an experimental study of the backscattered spectra of different dielectric materials, employing tightly focused Laguerre-Gaussian beams as incident light. Analysis of the experimental data allows us to determine the optical size of the measured spheres. Due to the extended wavelength range used in the experiments, the influence of the dispersion of the refractive index is also studied, unveiling that the oscillatory behavior of the spectra is related to the group velocity of the material. Circularly polarized Laguerre-Gaussian beams with different topological charges are also employed to probe the scattering process. We evaluated the limitations of the method depending on the particle sizes. We also compare some similarities of our analysis with the theory of cavities., I.T., M.M.-F., A.C., and G.M.-T. acknowledge the support from CSIC Research Platform on Quantum Technologies Grant No. PTI-001, from IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and DIPC/MPC on behalf of the Department of Education of the Basque Government, and from Project No. PID2022-143268NBI00 of Ministerio de Ciencia, Innovacion y Universidades. M.M.-F. also acknowledges the financial support from the Spanish Ministerio de Ciencia, Innovacion y Universidades through the FPI PhD Fellowship, Grant No. FIS-2017-87363-P. R.F. acknowledges the support of Grant No. PID2021-123163OB-I00 and Grant No. CEX2021-001230-S (Severo Ochoa Center of Excellence program) projects of the Spanish Ministerio de Ciencia, Innovacion y Universidades. C.L. acknowledges the financial support from Grant No. PID2021-124814NB-C21 funded by MCIN/AEI/10.13039/501100011033/.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Octahedral Tantalum Bromide Clusters as Catalysts for Light-Driven Hydrogen Evolution

  • Hernandez-Niño, Jhon Sebastian|||0000-0002-6550-7107
  • Feliz Rodriguez, Marta|||0000-0002-4429-0551
  • Guevara, Daniela
  • Shamsurin, Maxim
  • Benassi, Enrico
  • Sokolov, Maxim N.
[EN] Octahedral tantalum clusters are redox-active compounds. [{Ta6Bri12}Bra2(H2O)a4]·4H2O (i = inner; a = apical ligands) cluster results in efficient pre-catalyst for the light-driven H2 production from aqueous protons in homogeneous conditions. The most active cluster species are in situ generated by apical ligand exchange reaction from aqueous media., This research was funded by project PID2021-123163OB-I00 funded by MCIN/AEI/10.13039/501100011033/and FEDER. A way of making Europe and Severo Ochoa center of excellence program (CEX2021-001230-S). J.S.H. gratefully acknowledges to Programa Santiago Grisolía (Consejo Superior de Investigaciones Cientifíicas and Generalitat Valenciana; grant number GRISOLIA/2021/054). Funding for open access charge: CRUE-Universitat Politècnica de València. Computationalresources were kindly provided by Laboratory of complex compounds synthesis (Nikolaev Institute of Inorganic Chemistry SB RAS). We would like to thank to the technical team at the Instituto de Tecnologia Quimica for providing us all facilities for characterizations. Nikolaev Institute of Inorganic Chemistry team thanks the Ministry of Science and Higher Education of the Russian Federation, and Dr. Artem L. Guschin for CV measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

OER Activity Promoted by Organic Ligand-Free Cs2Pt(Cl, Br)6 Perovskite Photocatalyst for Solar-Driven Water Splitting

  • Mego, Kevin
  • Ruiz-Campos, Pedro
  • Garcia-Baldovi, Hermenegildo
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
[EN] The development of lead-free perovskites as environmentally sustainable materials has gained significant attention for their applications in solar cells and photocatalysis. In this study, Cs2PtCl6 and Cs2PtBr6 vacancy-ordered double perovskites are synthesized via a hydrothermal method and evaluated as ligand-free photocatalysts for solar-driven water splitting, targeting the oxygen evolution reaction (OER). Structural characterization confirms their cubic phase, and ultraviolet-visible diffuse reflectance spectroscopy reveals optical bandgaps of 2.17 eV for Cs2PtCl6 and 1.94 eV for Cs2PtBr6. Theoretical calculations based on density of states analysis confirms their semiconductor behavior. Photocatalytic studies show that Cs2PtBr6 exhibits superior O-2 evolution rates (368.9 mu mol g(-1) h(-1)) compared to Cs2PtCl6 (237.4 mu mol g(-1) h(-1)), attributed to its favorable electronic structure. Also, photoluminescence (PL) studies reveals that Cs2PtBr6 exhibits lower PL intensity and a longer emission lifetime (2.5 mu s) compared to Cs2PtCl6 (1.3 mu s). Long-term stability tests highlight moderate photostability, with Pt4+ reduction due to precipitation of Pt-0 under prolonged irradiation or reuses. This research highlights the potential of Cs2PtX6 perovskites for efficient, sustainable OER catalysis while identifying challenges related to structural stability and charge recombination., This research was funded by the Spanish Ministry of Science and Innovation through MCIN/AEI/10.13039/501100011033/ and FEDER a way of making Europe and Severo Ochoa Centre of Excellence Program (CEX2021-001230-S). K.M. acknowledges the PRE2022-104119 grant for the project Catalytic processes: Catalysis for energy and process intensification by applying instrumental tools to monitor chemical processes. P.A. received funding from the PID2021-123163OB-I00 grant, and H.G.B. was supported by the RYC2022-037287-I grant and PAID06-23. The authors extend their gratitude to the technical team at the Instituto de Tecnología Química (ITQ) for their support in facilitating the characterizations.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Graphene based Mo6 cluster hybrid for detecting simulant nerve agent DMMP

  • Casanova-Cháfer, Juan
  • Blanch, Xavier
  • Moreno, Ana
  • García-Aboal, Rocío
  • Llobet, Eduard
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • Feliz Rodriguez, Marta|||0000-0002-4429-0551
[EN] Nerve agents are highly toxic chemical compounds that pose significant threats to human health and safety. Detecting and identifying these agents quickly is crucial for preventing their exposure and providing timely treatment. This study proposes the use of nanohybrids comprising crystalline octahedral molybdenum iodide cluster material supported on graphene (Mo6@Graphene) as a novel sensing material for the detection of dimethyl methylphosphonate (DMMP), a simulant of sarin nerve agent. The electrical sensing performance towards different concentrations of DMMP and at room temperature demonstrated fast and sensitive responses to DMMP, with almost full recovery of the sensor baseline in a few minutes. The calibration curve obtained showed a linear relationship between the sensor response and DMMP concentration, enabling the estimation of the limit of detection (LOD) of 270 ppb. The robustness of the Mo6@Graphene nanomaterial towards DMMP was assessed using various techniques, including Raman spectroscopy, X-ray diffraction and photoelectron spectroscopy. The binding energies (BEs) between DMMP and the supported Mo6 clusters determined by DFT calculations revealed H-bonding interactions involved in the sensing mechanism. The excellent sensing performance of the Mo6@Graphene film, combined with its low power consumption and high stability, makes it a promising candidate for the detection of nerve agents and their simulants., J.C.-C. is supported by the Marie Sklodowska-Curie Postdoctoral Fellowship (Horizon Europe Programme) under grant agreement No. 101066282 "GREBOS". E.L. is supported by the Catalan Institute for Advanced Studies (ICREA) via the 2018 Edition of the ICREA Academia Award. This work was supported in part by the Marie Sklodowska-Curie Action (MSCA) Research and in part by the Innovation Staff Exchange (RISE) under Grant no. H2020-MSCA-RISE-2018-823895 "SENSOFT." This research was also funded by the ITQ though the project PID2021-123163OB-I00 funded by MCIN/AEI/10.13039/501100011033/and FEDER A way of making Europe and Severo Ochoa centre of excellence program (CEX2021-001230-S) . We also thank Dr. Mercedes Boronat for providing us the computational resources at ITQ.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Luminescence and Generation of Reactive Oxygen Species in Solution by Ta6Br12 Clusters

  • Hernandez-Niño, Jhon Sebastian|||0000-0002-6550-7107
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • Feliz Rodriguez, Marta|||0000-0002-4429-0551
  • Shamshurin, Maxim
  • Benassi, Enrico
  • Sokolov, Maxim N.
[EN] An intrinsic metal cluster NIR-II emission of the {Ta6Br12}2+ aqua/hydroxocomplexes was determined in aqueous solutions under inert atmosphere. The photoluminescence (PL) is enhanced in D2O, and the lifetime scale expands from nanoseconds to microseconds. Possible cluster emission transitions have been assigned and analyzed from a computational perspective. In the presence of O2, the cluster compound kept its robustness but showed partial quenching of the PL. Stern-Volmer and laser-flash photolysis studies confirmed that quenching is mainly associated with O2 diffusion. Laser-flash photolysis experiments showed that singlet oxygen (1O2) was not detected under measurement conditions. Generation of peroxide and superoxide radical species after irradiation in D2O was confirmed by using luminol as a probe, whereas no hydroxide radical species were detected as evidenced by the emission of the 3-coumarin carboxylic acid (3-CCA) molecular sensor., This research was funded by the Spanish Ministry of Science and Innovation (TED2021-130963B-C21, PID2021-123163OB-I00 and CEX2021-001230-S grants) funded by MCIN/AEI/10.13039/501100011033/and FEDER A way of making Europe. J.S.H. gratefully acknowledges to Programa Santiago Grisolia (Consejo Superior de Investigaciones Cientificas and Generalitat Valenciana; grant number GRISOLIA/2021/054). Computational resources were kindly provided by the Laboratory of complex compounds synthesis (Nikolaev Institute of Inorganic Chemistry SB RAS; supported by the Ministry of Science and Higher Education of the Russian Federation, no. 121031700313-8). CSIC for funding for open access charge. We thank the technical team at the Instituto de Tecnologia Quimica for providing us with all the facilities for all the characterizations.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optical Sensor Based on WS2 Quantum Dots for Lamotrigine Determination

  • Hristova, Lina
  • Martínez-Moro, Rut
  • Fernández-García, Esperanza
  • Vazquez, Luis
  • Petit-Domínguez, María Dolores
  • Casero, Elena
  • Quintana, Carmen
  • del Pozo, María
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
[EN] In this work, we obtained WS2 quantum dots by both liquid exfoliation and hydrothermal synthesis following a top-down and a bottom-up approach, respectively. The resulting nanomaterials were spectroscopically characterized by UV-vis absorption and fluorescence techniques. Atomic force microscopy measurements were performed for the morphological characterization. We have studied the interaction between the as-synthesized WS2 quantum dots with the antiepileptic drug lamotrigine, a noncolored analyte. This interaction produces a quenching of the native fluorescence of the nanomaterials, which depends linearly on the lamotrigine concentration. Moreover, the Stern-Volmer constants were calculated and the inhibition mechanism of the interaction was also investigated. Next, the WS2 quantum dots were immobilized on quartz supports for the development of an optical sensor for lamotrigine determination. The sensor shows a linear response with the analyte concentration in the 35.4-250 mu M range, with a limit of detection of 10.6 mu M. The sensor was applied to the determination of lamotrigine in a synthetic serum sample, obtaining a recovery of 94%. Moreover, for a rapid and visual detection of lamotrigine, we have tested the suitability of using paper as a support for immobilizing WS2 quantum dots., The authors acknowledge financial support from projects PID2020-113142RB-C21, PID2020-113142RB-C22, PID2023-149077OB-C32, and PID2023-149077OB-C31 funded by MCIN/AEI/10.13039/501100011033. This research was also funded by the ITQ though the project PID2021-123163OB-I00 funded by MCIN/AEI/10.13039/501100011033/and FEDER A way of making Europe and Severo Ochoa Centre of excellence program (CEX2021-001230-S). We thank to Jaime Martin Benito for his help in the characterization measurements discussion.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Octahedral Molybdenum Iodide Clusters Supported on Graphene for Resistive and Optical Gas Sensing

  • Casanova-Cháfer, Juan
  • García-Aboal, R.
  • Atienzar, Pedro
  • Feliz Rodríguez, Marta
  • Llobet, Eduard
This paper reports for the first time a gas-sensitive nanohybrid based on octahedral molybdenum iodide clusters supported on graphene flakes (Mo6@Graphene). The possibility of integrating this material into two different transducing schemes for gas sensing is proposed since the nanomaterial changes both its electrical resistivity and optical properties when exposed to gases and at room temperature. Particularly, when implemented in a chemoresistive device, the Mo6@Graphene hybrid showed an outstanding sensing performance toward NO2, revealing a limit of quantification of about 10 ppb and excellent response repeatability (0.9% of relative error). While the Mo6@Graphene chemoresistor was almost insensitive to NH3, the use of an optical transduction scheme (changes in photoluminescence) provided an outstanding detection of NH3 even for a low loading of Mo6. Nevertheless, the photoluminescence was not affected by the presence of NO2. In addition, the hybrid material revealed high stability of its gas sensing properties over time and under ambient moisture. Computational chemistry calculations were performed to better understand these results, and plausible sensing mechanisms were presented accordingly. These results pave the way to develop a new generation of multi-parameter sensors in which electronic and optical interrogation techniques can be implemented simultaneously, advancing toward the realization of highly selective and orthogonal gas sensing., J.C.-C. gratefully thanks ICREA Academia (project: 2018 ICREA Academia-01-AJUT). This research was funded from project PID2021-123163OB-I00 funded by MCIN/AEI/10.13039/501100011033/ and FEDER A way of making Europe, and Generalitat Valenciana (grant number AICO/2020/149). This work was partially funded by MICINN and FEDER via grant no. RTI2018-101580-B-I00. E. L. was supported by the Catalan Institution for Research and Advanced Studies via the 2018 Edition of the ICREA Academia Award.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Scanning Photocurrent Microscopy in Single Crystal Multidimensional Hybrid Lead Bromide Perovskites

  • Segura-Sanchis, Elena
  • García-Aboal, R.
  • Fenollosa, Roberto
  • Ramiro-Manzano, F.
  • Atienzar, Pedro
We investigated solution-grown single crystals of multidimensional 2D–3D hybrid lead bromide perovskites using spatially resolved photocurrent and photoluminescence. Scanning photocurrent microscopy (SPCM) measurements where the electrodes consisted of a dip probe contact and a back contact. The crystals revealed significant differences between 3D and multidimensional 2D–3D perovskites under biased detection, not only in terms of photocarrier decay length values but also in the spatial dynamics across the crystal. In general, the photocurrent maps indicate that the closer the border proximity, the shorter the effective decay length, thus suggesting a determinant role of the border recombination centers in monocrystalline samples. In this case, multidimensional 2D–3D perovskites exhibited a simple fitting model consisting of a single exponential, while 3D perovskites demonstrated two distinct charge carrier migration dynamics within the crystal: fast and slow. Although the first one matches that of the 2D–3D perovskite, the long decay of the 3D sample exhibits a value two orders of magnitude larger. This difference could be attributed to the presence of interlayer screening and a larger exciton binding energy of the multidimensional 2D–3D perovskites with respect to their 3D counterparts., This research was supported by the project MCIN/AEI/PID2021-123163OB-I00, and ERDF “A way of making Europe” by the European Union, as well as the Severo Ochoa Centre of Excellence program (CEX2021-001230-S), Ministry for Science and Innovation (MCIN) of Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optoelectronic properties of octahedral molybdenum cluster-based materials at a single crystal level

  • Segura-Sanchis, Elena
  • Moreno, Ana
  • Ramiro-Manzano, F.
  • Fenollosa, Roberto
  • Feliz Rodríguez, Marta
  • Atienzar, Pedro
Octahedral molybdenum (Mo) clusters constitute suitable building blocks for the design of promising single crystal materials in the field of optoelectronics. Here, we prepared single crystals composed of hydroxo MoX (X = Br, Cl) cluster complexes interconnected by H-bonding interactions with water molecules and protons. The optoelectronic responses and the absorption and emission spectra of these cluster-based single crystals were acquired upon light irradiation, and they show dependency on the nature of the halogens, with the brominated cluster being the most conductive. A fast photoelectrical response was recorded and it showed remarkable stability after multiple illumination on/off cycles. The results obtained provide relevant information for the development of photonic and optoelectronic devices, sensors and photocatalysts., We would like to thank the technical team at the Instituto de Tecnología Química for providing us all the facilities for all the characterization processes. This research was supported by the project PID2021-123163OB-I00 funded by MCIN/AEI/10.13039/501100011033/and FEDER A way of making Europe and Severo Ochoa Centre of Excellence Program (CEX2021-001230-S). F. R. M. acknowledges CSIC under the program: Ayudas para la incorporación de nuevos Científicos Titulares (Grant No. 202280I200)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Octahedral Tantalum Bromide Clusters as Catalysts for Light-Driven Hydrogen Evolution

  • Hernández, Jhon Sebastián
  • Guevara, Daniela
  • Shamshurin, Maxim
  • Benassi, Enrico
  • Sokolov, Maxim N.
  • Feliz Rodríguez, Marta
The development of an efficient hydrogen generation strategy from aqueous protons using sunlight is a current challenge aimed at the production of low-cost, easily accessible, renewable molecular hydrogen. For achieving this goal, non-noble metal containing and highly active catalysts for the hydrogen evolution reaction (HER) are desirable. Octahedral tantalum halide clusters {Ta(μ-X)} (X = halogen) represent an emerging class of such HER photocatalysts. In this work, the photocatalytic properties of octahedral aqua tantalum bromide clusters toward HER and in acid and homogeneous aqueous conditions were investigated. The [{TaBr}Br(HO)]·4HO (i = inner ligand; a = apical ligand) compound is revealed to be an efficient precatalyst in acid (HBr) conditions and with methanol as the sacrificial agent. A response surface methodology (RSM) study was applied for the optimization of the HER conditions, considering the concentrations of both additives (methanol and HBr) as independent variables. An optimal H production of 11 mmol·g (TON = 25) was achieved, which displays exceptional catalytic properties compared to regular Ta-based materials. The aqua tantalum bromide clusters assist in the photocatalytic hydrogen generation in agreement with energy-conversion schemes, and plausible active catalytic species and a reaction mechanism were proposed from computational and experimental perspectives., This research was funded by project PID2021–123163OB-I00 funded by MCIN/AEI/10.13039/501100011033/and FEDER A way of making Europe and Severo Ochoa center of excellence program (CEX2021–001230-S). J.S.H. gratefully acknowledges to Programa Santiago Grisolía (Consejo Superior de Investigaciones Científicas and Generalitat Valenciana; grant number GRISOLIA/2021/054). Funding for open access charge: CRUE-Universitat Politècnica de València. Computationalresources were kindly provided by Laboratory of complex compounds synthesis (Nikolaev Institute of Inorganic Chemistry SB RAS)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021–001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Monolayer-to-Mesoscale Modulation of the Optical Properties in 2D CrI3 Mapped by Hyperspectral Microscopy

  • Galbiati, Marta
  • Ramiro-Manzano, F.
  • Pérez Grau, José Joaquín
  • Cantos-Prieto, Fernando
  • Meseguer-Sánchez, Jaume
  • Kosic, Ivona
  • Mione, Filippo
  • Pallarés Vilar, Ana
  • Cantarero, Andrés
  • Soriano, David
  • Navarro-Moratalla, Efrén
Magnetic 2D materials hold promise to change the miniaturization paradigm of unidirectional photonic components. However, the integration of these materials in devices hinges on the accurate determination of the optical properties down to the monolayer limit, which is still missing. By using hyperspectral wide-field imaging at room temperature, we reveal a nonmonotonic thickness dependence of the complex optical dielectric function in the archetypal magnetic 2D material CrI3 extending across different length scales: onsetting at the mesoscale, peaking at the nanoscale, and decreasing again down to the single layer. These results portray a modification of the electronic properties of the material and align with the layer-dependent magnetism in CrI3, shedding light on the long-standing structural conundrum in this material. The unique modulation of the complex dielectric function from the monolayer up to more than 100 layers will be instrumental for understanding mesoscopic effects in layered materials and tuning light-matter interactions in magnetic 2D materials., The project that gave rise to these results received the financial support of a fellowship from the “la Caixa” Foundation (ID No. 100010434, fellowship codes LCF/BQ/PR21/11840011 and LCF/BQ/DI22/11940022) and Grant No. PID2020-118938GA-100 from the Spanish Ministerio de Ciencia e Innovación (MICINN). E. N. M. acknowledges the European Research Council (ERC) under the Horizon 2020 research and innovation program (ERC StG, Grant Agreement No. 803092). E. N. M. and M. G. acknowledge the MICINN and the European Union NextGenerationEU for financial support from the Ramon y Cajal program (Grants No. RYC2018-024736-I and No. RYC2021-034609-I). F. C. P. also acknowledges the MICINN for the FPU program (Grant No. FPU17/01587). F. R. M. acknowledges the MICINN for financial support (Grant No. PID2021-123163OB-I00). This work was also supported by the Spanish Unidad de Excelencia “María de Maeztu” (Grant No. CEX2019-000919-M) and is part of the Advanced Materials program supported by MICINN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. D. S. and A.C. acknowledge Generalitat Valenciana for financial support (from the CIDEGENT program Grant No. CIDEGENT/2021/052 and PROMETEO2020-016 respectively) and computational resources at University of Pisa., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced CO2 Sensing by Oxygen Plasma-Treated Perovskite-Graphene Nanocomposites

  • Casanova-Cháfer, Juan
  • García-Aboal, R.
  • Llobet, Eduard
  • Atienzar, Pedro
Carbon dioxide (CO) is a major greenhouse gas responsible for global warming and climate change. The development of sensitive CO sensors is crucial for environmental and industrial applications. This paper presents a novel CO sensor based on perovskite nanocrystals immobilized on graphene and functionalized with oxygen plasma treatment. The impact of this post-treatment method was thoroughly investigated using various characterization techniques, including Raman spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The detection of CO at parts per million (ppm) levels demonstrated that the hybrids subjected to 5 min of oxygen plasma treatment exhibited a 3-fold improvement in sensing performance compared to untreated layers. Consequently, the CO sensing capability of the oxygen-treated samples showed a limit of detection and limit of quantification of 6.9 and 22.9 ppm, respectively. Furthermore, the influence of ambient moisture on the CO sensing performance was also evaluated, revealing a significant effect of oxygen plasma treatment., J.C.-C. is supported by Marie Skłodowska-Curie Individual Fellowship (Horizon Europe program) under grant agreement no. 101066282 “GREBOS”. E.L. is supported by the Catalan Institute for Advanced Studies (ICREA) via the 2018 Edition of the ICREA Academia Award. This work was supported in part by the Marie Skłodowska-Curie Action (MSCA) Research and in part by the Innovation Staff Exchange (RISE) under grant no. H2020-MSCA-RISE-2018-823895 “SENSOFT”. This research was also funded by the ITQ through the project PID2021-123163OB-I00 funded by MCIN/AEI/10.13039/501100011033 and FEDER A way of making Europe and Severo Ochoa Centre of Excellence program (CEX2021-001230-S).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lead-Free Perovskite Nanocrystals Decorating Graphene for Detecting Nerve Agents

  • Casanova-Cháfer, Juan
  • García-Aboal, R.
  • Mego, Kevin
  • Malik, Shuja Bashir
  • Atienzar, Pedro
  • Llobet, Eduard
Highly toxic chemical compounds known as chemical warfare agents (CWAs) present substantial threats to human health and safety. Their swift detection and identification play a critical role in preventing exposure and ensuring timely intervention. This work develops nanohybrids to detect dimethyl methylphosphonate (DMMP), a simulant gas for sarin compound, which is classified as a nerve agent. Specifically, two different compositions (CsCuBr and CsAgBiBr) of lead-free perovskite nanocrystals (NCs) have been employed to decorate graphene. The sensitive films exhibit remarkable sensitivity to DMMP at the ppb range and under ambient temperature conditions. It is worth mentioning that this work reports for the first time the successful use of perovskite NCs for detecting DMMP. Besides, the sensing performance of both perovskites has been compared, revealing that CsCuBr-decorated graphene outperforms CsAgBiBr, offering up to a 4-fold improvement. The synthesis and decoration process are straightforward, industrially scalable, and inexpensive, while the use of lead-free perovskites leads to an environmentally friendly and harmless approach. These facts linked to a sensitive and reversible detection of DMMP at low concentrations pave the way for developing CWA gas sensors based on the use of lead-free perovskite NCs., We especially thank Xavier Blanch for his technical assistance with the gas-sensing measurements. J.C.-C. is supported by the Marie Skłodowska-Curie Postdoctoral Fellowship (Horizon Europe Programme) under grant agreement No. 101066282 “GREBOS”. E.L. is supported by the Catalan Institute for Advanced Studies (ICREA) via the 2023 Edition of the ICREA Academia Award. This work was supported in part by the Marie Skłodowska-Curie Action (MSCA) Research and in part by the Innovation Staff Exchange (RISE) under Grant no. H2020-MSCA-RISE-2018-823895 “SENSOFT”. This research was also funded by the ITQ though the project PID2021-123163OB-I00 funded by MCIN/AEI/10.13039/501100011033/and FEDER A way of making Europe and Severo Ochoa centre of excellence program (CEX2021-001230-S).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene based Mo6 cluster hybrid for detecting simulant nerve agent DMMP

  • Casanova-Cháfer, Juan
  • Blanch, Xavier
  • Moreno, Ana
  • García-Aboal, R.
  • Atienzar, Pedro
  • Llobet, Eduard
  • Feliz Rodríguez, Marta
Nerve agents are highly toxic chemical compounds that pose significant threats to human health and safety. Detecting and identifying these agents quickly is crucial for preventing their exposure and providing timely treatment. This study proposes the use of nanohybrids comprising crystalline octahedral molybdenum iodide cluster material supported on graphene (Mo@Graphene) as a novel sensing material for the detection of dimethyl methylphosphonate (DMMP), a simulant of sarin nerve agent. The electrical sensing performance towards different concentrations of DMMP and at room temperature demonstrated fast and sensitive responses to DMMP, with almost full recovery of the sensor baseline in a few minutes. The calibration curve obtained showed a linear relationship between the sensor response and DMMP concentration, enabling the estimation of the limit of detection (LOD) of 270 ppb. The robustness of the Mo@Graphene nanomaterial towards DMMP was assessed using various techniques, including Raman spectroscopy, X-ray diffraction and photoelectron spectroscopy. The binding energies (BEs) between DMMP and the supported Mo clusters determined by DFT calculations revealed H-bonding interactions involved in the sensing mechanism. The excellent sensing performance of the Mo@Graphene film, combined with its low power consumption and high stability, makes it a promising candidate for the detection of nerve agents and their simulants., J.C.-C. is supported by the Marie Skłodowska-Curie Postdoctoral Fellowship (Horizon Europe Programme) under grant agreement No. 101066282 “GREBOS”. E.L. is supported by the Catalan Institute for Advanced Studies (ICREA) via the 2018 Edition of the ICREA Academia Award. This work was supported in part by the Marie Skłodowska-Curie Action (MSCA) Research and in part by the Innovation Staff Exchange (RISE) under Grant no. H2020-MSCA-RISE-2018-823895 “SENSOFT.” This research was also funded by the ITQ though the project PID2021-123163OB-I00 funded by MCIN/AEI/10.13039/501100011033/ and FEDER A way of making Europe and Severo Ochoa centre of excellence program (CEX2021-001230-S). We also thank Dr. Mercedes Boronat for providing us the computational resources at ITQ.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mie scattering based measurements of the optical size of single spherical dielectric microparticles

  • Tribaldo, Isaac
  • Molezuelas-Ferreras, Martín
  • Cifuentes, Ángel
  • López, Cefe
  • Fenollosa, Roberto
  • Molina-Terriza, Gabriel
The scattering of light by dielectric particles has significant implications for fields such as atmospheric science, optical sensing, and material characterization. We present an experimental study of the backscattered spectra of different dielectric materials, employing tightly focused Laguerre–Gaussian beams as incident light. Analysis of the experimental data allows us to determine the optical size of the measured spheres. Due to the extended wavelength range used in the experiments, the influence of the dispersion of the refractive index is also studied, unveiling that the oscillatory behavior of the spectra is related to the group velocity of the material. Circularly polarized Laguerre–Gaussian beams with different topological charges are also employed to probe the scattering process. We evaluated the limitations of the method depending on the particle sizes. We also compare some similarities of our analysis with the theory of cavities., I.T., M.M.-F., A.C., and G.M.-T. acknowledge the support from CSIC Research Platform on Quantum Technologies Grant No. PTI-001, from IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and DIPC/MPC on behalf of the Department of Education of the Basque Government, and from Project No. PID2022-143268NBI00 of Ministerio de Ciencia, Innovación y Universidades. M.M.-F. also acknowledges the financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades through the FPI PhD Fellowship, Grant No. FIS-2017-87363-P. R.F. acknowledges the support of Grant No. PID2021-123163OB-I00 and Grant No. CEX2021-001230-S (Severo Ochoa Center of Excellence program) projects of the Spanish Ministerio de Ciencia, Innovación y Universidades. C.L. acknowledges the financial support from Grant No. PID2021-124814NB-C21 funded by MCIN/AEI/10.13039/501100011033/., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical Sensor Based on WS2 Quantum Dots for Lamotrigine Determination

  • Hristova, Lina
  • Martínez-Moro, Rut
  • Fernández-García, Esperanza
  • Vázquez, Luis
  • Atienzar, Pedro
  • Petit-Domínguez, María Dolores
  • Casero, Elena
  • Quintana, Carmen
  • Pozo, María del
In this work, we obtained WS2 quantum dots by both liquid exfoliation and hydrothermal synthesis following a top-down and a bottom-up approach, respectively. The resulting nanomaterials were spectroscopically characterized by UV–vis absorption and fluorescence techniques. Atomic force microscopy measurements were performed for the morphological characterization. We have studied the interaction between the as-synthesized WS2 quantum dots with the antiepileptic drug lamotrigine, a noncolored analyte. This interaction produces a quenching of the native fluorescence of the nanomaterials, which depends linearly on the lamotrigine concentration. Moreover, the Stern–Volmer constants were calculated and the inhibition mechanism of the interaction was also investigated. Next, the WS2 quantum dots were immobilized on quartz supports for the development of an optical sensor for lamotrigine determination. The sensor shows a linear response with the analyte concentration in the 35.4–250 μM range, with a limit of detection of 10.6 μM. The sensor was applied to the determination of lamotrigine in a synthetic serum sample, obtaining a recovery of 94%. Moreover, for a rapid and visual detection of lamotrigine, we have tested the suitability of using paper as a support for immobilizing WS2 quantum dots., The authors acknowledge financial support from projects PID2020-113142RB-C21, PID2020-113142RB-C22, PID2023-149077OB-C32, and PID2023-149077OB-C31 funded by MCIN/AEI/10.13039/501100011033. This research was also funded by the ITQ though the project PID2021-123163OB-I00 funded by MCIN/AEI/10.13039/501100011033/and FEDER A way of making Europe and Severo Ochoa Centre of excellence program (CEX2021-001230-S)., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2021-001230-S)., Peer reviewed