Pasar al contenido principal

Advanced photoelectrocatalytic processes for the obtention of solar fuels and high value chemicals.

RYC2022-037287-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Valorization of Field-Spent Granular Activated Carbon as Heterogeneous Ozonation Catalyst for Water Treatment

  • López-Francés, Antón|||0000-0002-1639-592X
  • Cabrero-Antonino, Maria
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Bernat-Quesada, Francisco
  • Ferrer, Belén
  • Blanes, María
  • García, Rafael
  • Almenar, Pura
  • Baldovi, Herme G.
[EN] Developing sustainable cost-effective strategies for valorization of field-spent granular activated carbon (s-GAC) from industrial water treatment has gained much interest. Here, we report a cost-effective strategy for the regeneration of s-GAC as an adsorbent in a large-scale drinking water treatment plant and used as an efficient and durable ozonation catalyst in water. To achieve this, a series of samples is prepared by subjecting s-GAC to thermally controlled combustion treatments with and without pyrolysis. The catalytic performance of the optimized sample is evaluated for oxalic acid degradation as the model pollutant under batch (>15 h) and continuous flow operations (>200 h). The partially deactivated catalyst upon reuse is restored by thermal treatment. Electron paramagnetic resonance and selective quenching experiments show the formation of singlet oxygen (O-1(2)) during catalytic ozonation. The GAC-ozonation catalyst is efficient to minimize the formation of chlorinated disinfection by-products like trihalomethanes and haloacetic acids in an urban wastewater effluent., A.D. is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, Next Generation EU). HG thanks the financial support by the Health Research Institute of the Balearic Islands (grant COVID-19/25) by the Regional Ministry of European funds and Generalitat Valencia project (AICO/2019/21421). H.G. thanks to Ayuda RYC2022-037287-I financiada por MCIN/AEI /10.13039/501100011033 y por El FSE invierte en tu future. S.N. thanks financial support by Agencia Valenciana de la Innovacio (AVI, INNEST/2020/111) project and is also grateful from Grant PID2021-123856OB-00 funded by MICIU/AEI/10.13039/501100011033 and by "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hydrogel composites based on chitosan and CuAuTiO2 photocatalysts for hydrogen production under simulated sunlight irradiation

  • Ramírez, Oscar
  • Baldovi, Herme G.
  • Saldías, Cesar
  • Leiva, Angel
  • Díaz, David
  • López-Francés, Antón|||0000-0002-1639-592X
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] This study explored the photocatalytic hydrogen evolution reaction (HER) using novel biohydrogel composites comprising chitosan, and a photocatalyst consisting in TiO2 P25 decorated with Au and/or Cu mono- and bimetallic nanoparticles (NPs) to boost its optical and catalytic properties. Low loads of Cu and Au (1 mol%) were incorporated onto TiO2 via a green photodeposition methodology. Characterization techniques confirmed the incorporation of decoration metals as well as improvements in the light absorption properties in the visible light interval (lambda > 390 nm) and electron transfer capability of the semiconductors. Thereafter, Au and/or Cu NP- supported TiO2 were incorporated into chitosan-based physically crosslinked hydrogels revealing significant interactions between chitosan functional groups (hydroxyls, amines and amides) with the NPs to ensure its encapsulation. These materials were evaluated as photocatalysts for the HER using water and methanol mixtures under simulated sunlight and visible light irradiation. Sample CuAuTiO2/ChTPP exhibited a maximum hydrogen generation of 1790 mu mol g(-1) h(-1) under simulated sunlight irradiation, almost 12-folds higher compared with TiO2/ChTPP. Also, the nanocomposites revealed a similar tendency under visible light with a maximum hydrogen production of 590 mu mol g(-1) h(-1) . These results agree with the efficiency of photoinduced charge separation revealed by transient photocurrent and EIS., O.R. acknowledges ANID doctoral scholarship number 21191002. H. G. thanks Ayuda RYC2022-037287-I financiada por MCIN/AEI/10.13039/501100011033 y por El FSE invierte en tu futuro. C.S. thanks FONDECYT project 121022. S.N. thanks the support of grant PID2021-123856OBI00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. A.L. thanks to FONDECYT project number 1211122 and FONDAP 1522A006, for financial support for the research. D.D.D. thanks the Spanish Government for the following projects: TED2021-132847B I00/AEI/10.13039/501100011033/Union Europea NextGenerationEU/PRTR and PID2022-142118OB-I00/MCIN/AEI/10.13039/501100011033/UE. D.D.D. also thanks Nanotec, INTech, Cabildo de Tenerife and ULL for laboratory facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced Green Hydrogen Generation via Photocatalytic Water Splitting Using V-Doped Ti-Squarate MOFs

  • Ferrando-Ferrero, Javier
  • Vos-Gracia, Miriam
  • Santoriello, Giuseppe
  • Voccia, Maria
  • Farnesi Camellone, Matteo
  • Caporaso, Lucia
  • Horcajada, Patricia
  • Carrasco, Sergio
  • Marta
  • Fernandes-de Almeida, Vitor
  • Garcia-Baldovi, Hermenegildo
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] Herein, defect engineering strategies were applied to enhance the photocatalytic activity of squarate-based MOFs (IEF-11) for green hydrogen generation via water splitting. The textural properties of pristine IEF-11(Ti) were significantly improved using microwave (MW)-assisted synthesis, leading to a four-fold increase in surface area (350 m2 g-1) due to the formation of mesopores associated with defect aggregation, primarily arising from linker vacancies (24%). Vanadium doping (0-100%) progressively reduced the optical band gap (2.44-1.87 eV), shifting absorption toward the visible region. The IEF-11 series was evaluated as photocatalysts for the hydrogen evolution reaction under simulated sunlight irradiation, revealing a volcano-type trend correlating activity with V content. Doped with 11% V, the MW-synthesized IEF-11(Ti0.89V0.11)_MW solid exhibited the highest activity (1053 vs. 536 mu mol g-1 h-1 H2 for IEF-11(Ti)), attributed to optimized band alignment, enhanced charge separation, and structural robustness. It also showed activity in photocatalytic overall water splitting (83 mu mol g-1 h-1 H2, 30% higher than the undoped IEF-11(Ti)). Theoretical calculations further confirmed band gap narrowing and the generation of new electronic states upon V-doping, facilitating charge transfer and reducing electron-hole recombination. These findings highlight the relevance of inducing artificial porosity and V-doping of IEF-11(Ti) to prepare efficient MOF-based photocatalysts. Importantly, this work not only reports the first V-squarate frameworks but also represents one of the first systematic studies addressing the effect of metal doping in MOFs for photocatalytic water splitting, achieving competitive efficiencies operating in the absence of cocatalysts., M.V.-G., H.G., S.N., P.H., and S.C. acknowledge HYLIOS project (CPP2022-010052), J.F.-F., S.C., and P.H. acknowledge NAPOLION project (PID2022-139956OB-I00) and HYDRAGON project (PCI2025-163274) and S.N. thanks the support received from Grant PID2024-155324OB-I00, all funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. J.F.-F. acknowledges the PhD grant from the Community of Madrid (PIPF-2023/ECO-29763). M.G.-F. thanks the PhD financial support of PRE2022-101327. V.F. thanks support from Generalitat Valenciana for a Santiago Grisolia (CIGRIS/2021/096) scholarship. H.G.B. thanks the support of grant number RYC2022-037287-I funded by MCIN/AEI/1013039/501100011033. G.S. and L.C. gratefully acknowledge the italian MUR for funding via the PRIN 2022 project "MATISSE" (2022K5SX27). We also thank CINECA for providing computational resources through the ISCRA C projects "SCORPION" and "COSACCO". H.G. thanks financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PDI2021-0126071-OB-CO21) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). We acknowledge the European Synchrotron Radiation Facility (ESRF) for provision of synchrotron radiation facilities and Momentum Transfer for facilitating the diffraction measurements. Jakub Drnec is thanked for assistance and support in using beamline ID31. The measurement setup was developed with funding from the European Union's Horizon 2020 research and innovation program under the STREAMLINE project (grant agreement ID 870313). Measurements performed as part of the MatScatNet project were supported by OSCARS through the European Commission's Horizon Europe Research and Innovation programme under grant agreement No. 101129751.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving the water resistance of Bi-based perovskite-inspired materials for vapor-phase photocatalytic overall water splitting

  • Chacón-García, Antonio J.
  • Pols, Mike
  • Tao, Shuxia
  • Calero, Sofía
  • Vitorica-Yrezabal, Iñigo J.
  • Rodríguez-Diéguez, Antonio
  • Horcajada, Patricia
  • Pérez, Yolanda
  • Garcia-Baldovi, Hermenegildo
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Lead halide perovskites are well known for their exceptional photophysical and electronic properties, which have placed them at the forefront of challenging optoelectronic applications and solar-to-fuel conversion. However, their air/water instability, combined with their toxicity, is still a critical problem that has slowed down their commercialization. In this sense, bismuth-based halide derivatives attract much interest as a potentially safer, air-stable alternative. Herein, a novel Bi-based perovskite-inspired material, IEF-19 (IEF stands for IMDEA Energy Framework), which contains a bulky aromatic cation (1,5-diammonium naphthalene), is prepared. Additionally, an N-alkylation strategy is successfully employed to achieve four water-stable perovskite-inspired materials, which contains diammonium naphthalene cations that are tetra-alkylated by methyl, ethyl, propyl, and butyl groups. Moreover, computational studies are performed to gain a deeper understanding of the intrinsic structural stability and affinity of water molecules for Bi-based perovskite-inspired materials. Importantly, the air- and water-stable IEF-19-Et (i.e., stable at least 12 months under ambient conditions and 3 weeks in contact with water) is found to be an active photocatalyst for vapor-phase overall water splitting in the absence of any sacrificial agent under both ultraviolet-visible or simulated sunlight irradiation. This material exhibits an estimated apparent quantum yield of 0.08% at 400 nm, partially explained by its adequate energy band level diagram., A.J.C.-G., Y.P., and P.H. acknowledge Strategic Projects Oriented to Ecological Transition and Digital Transition "H2-MOF" TED2021-132092B-C21 and MADRID-PV2-CM/EMT-4308 project from Comunidad de Madrid. H.G.B. thanks the support of grant no. RYC2022-037287-I funded by MCIN/AEI/10.13039/501100011033 and El FSE invierte en tu futuro. S.N. thanks the support of Grant no. PID2021-123856OBI00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, a way of making Europe. S.T. acknowledges funding from VIDI (project no. VI.Vidi.213.091) from NWO, The Netherlands.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sunlight-Driven Green Synthesis of Platinum Nanoparticles From Double-Vacancy Halide Perovskite Precursors for Methanol Reforming

  • Chacón-Ruiz, Saray
  • Garcia-Baldovi, Hermenegildo
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • Mego, Kevin
  • Ruiz-Campos, Pedro
[EN] The development of synthetic procedures for preparing metal nanoparticles with controlled size using sunlight opens new avenues toward more sustainable methods with lower energy consumption. Herein, we propose the use of double-vacancy halide perovskites as precursors for engineering highly crystalline and small platinum nanoparticles (< 3 nm) under simulated sunlight irradiation, using low concentration of methanol as sacrificial agent at room temperature. The formation of Pt NP was dependent on the methanol concentration impacting in the final Pt particle size distribution and time formation. After purification, this narrow sized Pt NP were employed for the methanol reforming reaction, showing excellent activity after 4 h and high selectivity toward hydrogen production (4.18 mmol & centerdot;h(-1) of H-2), along with other carbon products such as CO (2.26 mmol & centerdot;h(-1)), CH4 (0.54 mmol & centerdot;h(-1)), CO2 (0.28 mmol & centerdot;h(-1)), and C-2 species (0.17 mmol & centerdot;h(-1))., This research was funded by the Spanish Ministry of Science and Innovation through MCIN/AEI/10.13039/501100011033/ and "FEDER a way of making Europe," and the Severo Ochoa Centre of Excellence program (CEX2021-001230-S). K.M. acknowledges the PRE2022-104119 grant for the project "Catalytic processes: Catalysis for energy and process intensification by applying instrumental tools to monitor chemical processes." S.C.R. is thankful to PR-H2CVAL4-C1-2022-0090 grant funded by Union Europea NextGenerationEU. P.A. received funding from the PID2021-123163OB-I00 grant, and H.G.B. was supported by the RYC2022-037287-I grant and PAID-06-23. We thank to the technical team at the Instituto de Tecnologia Quimica (ITQ) for their support in facilitating the characterizations.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photo-thermal Catalytic CO2 Methanation by RuO x @MIL-101(Cr) with 9.2% Apparent Quantum Yield under Visible Light Irradiation

  • Ramirez-Hernandez, Juan Jose
  • Fernandes-de Almeida, Vitor
  • Ferrer Ribera, Rosa Belén
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
  • Vayá Pérez, Ignacio|||0000-0003-1682-9342
  • Garcia-Baldovi, Hermenegildo
  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Abou-Khalil, Zahraa
  • Daturi, M
  • Clet, Guillaume
  • El-Roz, Mohamad
[EN] Solar-assisted gaseous CO2 hydrogenation to CH4 is a potential strategy for favoring the transition to net zero emissions. Here, we report the development of a series of efficient metal-organic frameworks with MIL-101(Cr or Fe) topology decorated with RuOx nanoparticles (ca. 0.2-2 wt %) as heterogeneous photocatalysts for the selective methanation of CO2 by H-2 under simulated sunlight irradiation. The activity of RuOx(1 wt %)@MIL-101(Cr) is between 3 and 50 times higher than related MOF-based photocatalysts under similar reaction conditions. Among the different photocatalysts, the optimized RuOx(2 wt %)@MIL-101(Cr) photocatalyst showed 98.1% CO2 conversion with 98.8% CH4 selectivity reaching a production rate of 7.85 mmol g(-1) h(-1) with 720 mW cm(-2) at 200 degrees C. Further, this photocatalyst exhibited a record apparent quantum yield of 9.2% at 600 nm and 200 degrees C after subtracting thermal activity contribution compared to any previous MOF- or other heterogeneous-based photocatalyst reported so far. The photocatalyst retained its activity and integrity upon reuse for about 110 h. Transient photocurrent, electrochemical impedance, photoluminescence, and laser flash photolysis spectroscopies together with additional photocatalytic experiments suggest the occurrance of dual photochemical and photothermal reaction pathways. The photocatalytic CO2 methanation reaction mechanism was further investigated using operando Fourier transform infrared spectroscopy., J.J.R.-H. thanks the Universitat Politecnica de Valencia for the Ph.D. financial support of the PAID-01-21 project. I.V. appreciates the support of Grant PID2020-115010RB-I00 funded by MICIU/AEI/10.13039/501100011033. H.G.B. appreciates the support of Grant No. RYC2022-037287-I funded by MCIN/AEI/1013039/501100011033. The METHASOL project receives funding from the European Union Horizon 2020 research and innovation programme under Grant Agreement No. 10102264. Funding for open access charge: CRUE-Universitat Politecnica de Valencia. A.D. is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). F.X.L.X the Spanish Ministry of Science and Innovation (PID2020-112590GB-C21, PID2023-146114NB-C21, and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033) for support. This study forms part of the Advanced Materials Program and was supported by MICIN with funding from European Union NextGeneration (PRTR-C17.I1) and by the Generalitat Valenciana (MFA/2022/003). M.E.-R. acknowledges the Normandy Region and the European Union for financial support (project SuntoChem). S.N. appreciates the support received from Grant PID2021-123856OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

CsPbBr3 nanocrystals supported on a partially oxidized Ti2N MXene for photothermal CO2 conversion

  • Mego-de la Cruz, Froy Kevin
  • Emanuela Accardo
  • Garcia-Baldovi, Hermenegildo
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • Ruiz-Campos, Pedro
[EN] The development of new photo-thermal catalysts for the transformation of CO2 into fuels is of great interest, offering a clean and sustainable approach to reducing the carbon footprint. Herein, we present a novel hybrid material composed of a nanocrystalline metal halide perovskite (CsPbBr3) supported on a two-dimensional titanium nitride (Ti2N) MXene. Additionally, we demonstrate the importance of forming an external TiO2 layer through partial oxidation of the MXene (POM-Ti2N), which introduces catalytic centers and enhances photogenerated charge separation. Remarkable activity in the formation of CH4 and CO was observed, with yields of 321 mu mol g-1 and 480 mu mol g-1, respectively. The selectivity of the reaction was found to be temperature dependent. The mechanism was thoroughly investigated using XPS and photoluminescence studies. XPS analysis revealed a significant chemical interaction between the CsPbBr3 nanocrystals and the POM-Ti2N MXene after the formation of the composite. Photoluminescence measurements revealed a considerably shorter emission lifetime for the hybrid catalyst (tau ave = 1.73 ns) compared to that of the CsPbBr3 nanoparticles (tau ave = 25.32 ns), indicating strong interaction with the MXene. Furthermore, this research highlights the potential of combining metal halide perovskites with MXenes and the importance of controlling their interface for photo-thermal reactions., This research was funded by the Spanish Ministry of Science and Innovation through MCIN/AEI/10.13039/501100011033/and "FEDER a way of making Europe" and the Severo Ochoa Centre of Excellence program (CEX2021-001230-S). K. M. acknowledges the PRE2022-104119 grant for the project "Catalytic processes: catalysis for energy and process intensification by applying instrumental tools to monitor chemical processes." P. A. received funding from the PID2021-123163OB-I00 grant. H. G. B. was supported by the RYC2022-037287-I grant, PAID-06-23. Also, this research leading to these results has received funding from the European Union's Horizon Europe research and innovation programme (Project DAM4CO2, Double-Active Membranes for a sustainable CO2 cycle; HORIZON-EIC-2022-PATHFINDERCHALLENGES-01-Number: 101115488). We thank the technical team at the Instituto de Tecnologia Quimica (ITQ) for their support in facilitating the characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solar-Assisted CO2 Methanation via Photocatalytic Sabatier Reaction by Calcined Titanium-based Organic Framework Supported RuOx Nanoparticles

  • Rueda-Navarro, Celia Maria|||0000-0002-9569-7722
  • Marta
  • Cabrero-Antonino, Maria
  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • Ferrer Ribera, Rosa Belén
  • Garcia-Baldovi, Hermenegildo
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] CO2 reduction by sunlight under mild reaction conditions is a research area of increasing interest expected to favor decarbonization and produce fuels and chemicals in the circular economy. We hereby report on the development of a series of titanium oxide-based solids produced by calcination of MIL-125(Ti)-NH2 decorated with RuOx nanoparticles (1 wt %) material at temperatures from 350 to 650 degrees C and used as photocatalysts for CO2 methanation under simulated sunlight irradiation (45 mW/cm(2)) at <200 degrees C and 1.5 atm total pressure. The material synthesized at 350 degrees C produced the highest photoactivity of the series (4.73 mmol g(-1) CH4 at 22 h and an apparent quantum yield at 400, 500 and 750 nm of 0.76, 0.65 and 0.54 %, respectively), comparing favorably with the activities of other MOF-based materials reported so far. Insights into the material's photocatalytic performance and a study of the possible reaction pathways during CO2 methanation were obtained by electrochemical impedance, electron spin resonance, photoluminescence and in situ FT-IR spectroscopies together with transient photocurrent and hydrogen temperature programed desorption measurements. The study showed the possibility of using MOF-based materials as precursors to develop metal oxide photocatalysts with enhanced activities for solar-driven gaseous CO2 photomethanation., C.M.R.N. thanks the support of PRE2019-089877 funded by MICIU/AEI/10.13039/501100011033. M.G.F. thanks the support of PRE2022-101327 funded by MICIU /AEI/10.13039/501100011033. A.D. is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). The METHASOL project receives funding from the European Union Horizon 2020 research and innovation programme under Grant Agreement No10102264. Funding for open access charge: CRUE-Universitat Politecnica de Valencia. H.G.B. Thanks the support of grant number RYC2022-037287-I funded by MCIN/AEI/10.13039/501100011033. S.N. thanks the support of grant PID2021-123856OBI00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Versatile Heterometallic Microporous MOF for Photocatalytic Hydrogen Generation

  • Wang, Xingze
  • Dovgaliuk, Iurii
  • Cabanes, Valentin Diez
  • Chakraborty, Debanjan
  • Maurin, Guillaume
  • Mouchaham, Georges
  • Serre, Christian
  • Ramirez-Hernandez, Juan Jose
  • Garcia-Baldovi, Hermenegildo
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] Photocatalytic particulate systems offer a cost-effective solar hydrogen production but are generally limited by narrow visiblelight absorption and poor stability. Here, we report a family of heterometallic MOF, MIP215(ZrIV/MII) (MII = Cu, Ni), constructed from 8-connected Zr6 oxoclusters and 4-connected pyrazolate-carboxylate metalloligands using a onepot, ambient, water only synthesis. The resulting 4,8-connected scu frameworks feature one-dimensional microporous channels, chemical robustness in aqueous and organic media, and reversible solvent-responsive flexibility upon dehydration/rehydration. Both Cu or Ni based solids exhibit broad visible absorption range up to ca. 800 nm, and suitable band-edge positions for H2 evolution in water/methanol under simulated sunlight. In the absence of any cocatalyst, MIP215(Zr/Cu) delivers sustained activity exceeding 1 mmol & centerdot;g- 1 H2 in 5 h, while MIP215(Zr/Ni) displays higher initial rates but reduced stability, in line with observed metalleaching and crystallinity loss. Time-dependent density functional theory calculations indicate that ligand-to-metal charge-transfer states localized on the metalloligands govern the photocatalytic response, underscoring the role of photophysics beyond thermodynamic driving force in the superior Cu-based performance. This work establishes a green and scalable approach to robust, flexible heterometallic MOFs with tunable photoactivity for efficient, noblemetalfree solar hydrogen production., Xingze Wang is grateful for the support from the CSC grant (Grant no. 202008120117). The authors thanks beamline staff from BM01 (Swiss-Norwegian Beamlines at ESRF, Grenoble) for the support of the in-situ synchrotron powder X-ray diffraction data. H.G. is thankful for Ayuda RYC2022-037287-I funded by MCIN/AEI/10.13039/501100011033 and by El FSE invierte en tu futuro. S.N. is thankful for the support received from Grant PID2024-155324OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. The Authors acknowledge the European Union under the Grant Agreement 101084131 (MOF2H2 project) and the French National Research Agency (MOFtoH2, ANR-21-CE50-0022) for the financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antimicrobial activity of safe concentrations of ozone, hydrogen peroxide, and triethylene glycol in air and surfaces

  • Truyols-Vives, Joan
  • Mercader-Barcelo, Josep
  • Baldovi, Herme G.
  • Botella Grau, Mª Salud|||0000-0002-4254-7587
[EN] Monitoring and control of indoor air hygiene has gained much interest since the COVID-19 pandemic because the airborne route is the main pathway for the spread of SARS-CoV-2 and other pathogens, making it necessary to develop strategies to mitigate airborne transmission of diseases. This work addresses indoor breathable air hygiene by proposing the "in situ" reduction of airborne microorganisms with the nebulization of low and safe concentrations of hydrogen peroxide (H2O2, 0.5 and 1 ppm), ozone (O3, 0.06 and 0.2 ppm), triethylene glycol (TEG, 17.1, 52 and 171.2 ppm), and their combinations. The antimicrobial activity was evaluated in an office room by assessing the viability of commercial extremophile sporulated bacteria and naturally present bacteria and fungi in surfaces and air. All three chemicals individually dispersed reduced the viability of sporulated bacteria and naturally occurring microorganisms. Binary combinations were more effective than individual agents in the case of the H2O2 and O3 mixture against sporulated bacteria, and the O3 and TEG mixture against airborne and surface bacteria. The ternary mixture was the most effective against commercial sporulated bacteria and airborne microorganisms. These results illustrate that the application of low and safe concentrations of antimicrobial compounds in indoor air could be an interesting strategy to reduce infection risk.; The application of low and non-toxic concentrations of antimicrobial compounds in indoor air is an interesting strategy to reduce airborne bacteria and fungi thereby reducing infection risk., Financial support by the Health Research Institute of the Balearic Islands (grant COVID-19/25) and by the Regional Ministry of European funds, University and Culture of the Balearic Islands (grant AP_2021_032) is gratefully acknowledged. H. G. B. grant RYC2022-037287-I funded by MICIU/AEI/10.13039/501100011033 and "ESF+".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sustainable nitrogen fixation: Agrochemical research in food production adapted to planetary limits

  • Pascual, Lluís
  • Emanuela Accardo
  • Garcia-Baldovi, Hermenegildo
[EN] Today's global food production depends on the fixation of atmospheric nitrogen by using the Haber-Bosch process. The application of this catalytic system laid the foundations for the development of industrial agriculture and led to an unprecedented acceleration in the growth of human societies during the so-called Green Revolution. However, it appears that this production model will not be able to adapt to the current challenges of energy sustainability and climate crisis response. The Haber-Bosch cycle has a major impact on energy consumption and carbon dioxide emissions. In order to rethink this agri-food model, this present article examines chemical and technological development strategies to move towards an energy and environmentally sustainable model., Grant RYC2022-037287-I funded by MICIU/AEI/10.13039/501100011033 and ESF+.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Engineering of Activated Biochar Derived from Pine Needle Waste Biomass as Ozonation Catalyst in Water

  • López-Francés, Antón|||0000-0002-1639-592X
  • Ferrer Ribera, Rosa Belén
  • Garcia-Baldovi, Hermenegildo
  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Baldovi, Herme G.
[EN] Valorization of biomass wastes into carbon-based catalysts for water treatment is a clear paradigm of sustainability.Herein, we investigate an unprecedented transformation of pine needle waste biomass into activated biochars (PNCs) as ozonation catalysts for aqueous oxalic acid degradation. The physico-chemical and textural properties of PNCs are tailored by combining pyrolysis temperatures up to 1200 degrees C and the use or not of KOH or K2CO3 as activating agents. The physico-chemical and structural properties of these carbocatalysts are correlated with their catalytic activities. The PNC catalyst pyrolized at 1200 degrees C for 4 h using K2CO3 (PNC1200-4K2CO3) provides a complete pollutant degradation after 150 min, while PNC catalyst pyrolized at 1200 degrees C for 4 h without activation requires 300 min. PNC1200-4K2CO3 performance compares favorably with previous reports. The superior catalytic activity of this reusable catalyst is attributed to its highest population of pi-extended aromatic domains as active sites together with high porosity. The catalytic formation of 1O2, HO. and HOO. radicals are supported by electron paramagnetic resonance measurements and selective quenching experiments. Unlike most of the previous analogous reports, herein, we demonstrate that 1O2 in the presence of PNC1200-4K2CO3 can degrade oxalic acid even in the presence of common radical scavengers., A.D. is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, Next Generation EU). H.G. thanks to Ayuda RYC2022-037287-I financiada por MCIN/AEI /10.13039/501100011033 y por El FSE invierte en tu future. S.N. thanks the support received from Grant PID2021-123856OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

OER Activity Promoted by Organic Ligand-Free Cs2Pt(Cl, Br)6 Perovskite Photocatalyst for Solar-Driven Water Splitting

  • Mego, Kevin
  • Ruiz-Campos, Pedro
  • Garcia-Baldovi, Hermenegildo
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
[EN] The development of lead-free perovskites as environmentally sustainable materials has gained significant attention for their applications in solar cells and photocatalysis. In this study, Cs2PtCl6 and Cs2PtBr6 vacancy-ordered double perovskites are synthesized via a hydrothermal method and evaluated as ligand-free photocatalysts for solar-driven water splitting, targeting the oxygen evolution reaction (OER). Structural characterization confirms their cubic phase, and ultraviolet-visible diffuse reflectance spectroscopy reveals optical bandgaps of 2.17 eV for Cs2PtCl6 and 1.94 eV for Cs2PtBr6. Theoretical calculations based on density of states analysis confirms their semiconductor behavior. Photocatalytic studies show that Cs2PtBr6 exhibits superior O-2 evolution rates (368.9 mu mol g(-1) h(-1)) compared to Cs2PtCl6 (237.4 mu mol g(-1) h(-1)), attributed to its favorable electronic structure. Also, photoluminescence (PL) studies reveals that Cs2PtBr6 exhibits lower PL intensity and a longer emission lifetime (2.5 mu s) compared to Cs2PtCl6 (1.3 mu s). Long-term stability tests highlight moderate photostability, with Pt4+ reduction due to precipitation of Pt-0 under prolonged irradiation or reuses. This research highlights the potential of Cs2PtX6 perovskites for efficient, sustainable OER catalysis while identifying challenges related to structural stability and charge recombination., This research was funded by the Spanish Ministry of Science and Innovation through MCIN/AEI/10.13039/501100011033/ and FEDER a way of making Europe and Severo Ochoa Centre of Excellence Program (CEX2021-001230-S). K.M. acknowledges the PRE2022-104119 grant for the project Catalytic processes: Catalysis for energy and process intensification by applying instrumental tools to monitor chemical processes. P.A. received funding from the PID2021-123163OB-I00 grant, and H.G.B. was supported by the RYC2022-037287-I grant and PAID06-23. The authors extend their gratitude to the technical team at the Instituto de Tecnología Química (ITQ) for their support in facilitating the characterizations.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Inducing Reactivity by Cluster Strain in Titanium Frameworks

  • Gomez-Oliveira, Eloy P.
  • Castells-Gil, Javier
  • Gandara, Felipe
  • Almora-Barrios, Neyvis
  • Tatay, Sergio
  • Padial, Natalia M.
  • Marti-Gastaldo, Carlos
  • Fernandes-de Almeida, Vitor
  • Garcia-Baldovi, Hermenegildo
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] Despite their potential to control charge separation and redox activity, deliberate strategies to distort metal-oxo clusters in molecular frameworks remain limited. Here we present a proof-of-concept for cluster strain engineering using the titanium-organic framework MUV-10 as a model. Replacing Ca2+ with larger alkaline-earth cations (Sr2+, Ba2+) induces predictable distortions of Ti2M2 clusters and a cubic-to-tetragonal cell transformation while preserving the overall connectivity. This local strain alters Ti-O coordination geometry, enhances ligand-to-metal charge transfer, and promotes the photogeneration of Ti3+ sites, as validated by photocatalytic CO2 methanation under standardized conditions. Importantly, the extent of distortion follows the trend anticipated from the Goldschmidt tolerance factor, a classical descriptor from perovskite chemistry, that we repurpose here to rationalize strain in reticular frameworks. Taken together, these findings establish a conceptual link between oxide catalysis and reticular chemistry, highlighting cluster strain as a potential structural switch to modulate redox reactivity in molecular solids., This work was supported by the EU (ERC-2021-COG-101043428 & ERC-2022-POC-101113106), the Generalitat Valenciana (PROMETEU-2021-054 and MFA/2022/026) and MICIU/AEI/10.13039/501100011033 (CEX2024-001467-M, PID2023-149922OB-I00, PID2023-150383OB-I00 and CNS2022-135677). V.F.A. is thankful for PhD financial support from Conselleria de Innnovacion, Universidades, Ciencia y Sociedad Digital under Santiago Grisolia program (CIGRIS/2021/096). H.G. is thankful for Ayuda RYC2022-037287-I funded by MCIN/AEI/10.13039/501100011033 and by El FSE invierte en tu future. S.N. is thankful for the support received from Grant PID2024-155324OB-I00, and F.G. is thankful for Grant PID2021-123287OB-I00, funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. N.M.P. thanks La Caixa Foundation for a Postdoctoral Junior Leader-Retaining Fellowship (ID100010434, fellowship code LCF/BQ/PR20/11770014), the Generalitat Valenciana (SEJI-GENT/2021/059) and the RYC2022-037132-I funded by MICIU/AEI/10.13039/501100011033 and by the ESF+. J.C.-G. thanks The Leverhulme Trust for an Early Career Fellowship (ECF-2023-129). The authors would also like to thank Clara Chinchilla Garzon for her help with the EPR measurements, the SCSIE of the University of Valencia for providing access to its research facilities, and the X-ray diffraction facility of ICMM-CSIC for access to SCXRD. BSC-RES (QHS-2025-1-0029 and 2025-2-0035) and Synchrotron ALBA (beamline BL13-XALOC, 2024098672 and beamline BL04-MSPD, 2024028209) are also acknowledged for access to their facilities and technical support.