Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hydrogel composites based on chitosan and CuAuTiO2 photocatalysts for hydrogen production under simulated sunlight irradiation

  • Ramírez, Oscar
  • Baldovi, Herme G.
  • Saldías, Cesar
  • Leiva, Angel
  • Díaz, David
  • López-Francés, Antón|||0000-0002-1639-592X
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] This study explored the photocatalytic hydrogen evolution reaction (HER) using novel biohydrogel composites comprising chitosan, and a photocatalyst consisting in TiO2 P25 decorated with Au and/or Cu mono- and bimetallic nanoparticles (NPs) to boost its optical and catalytic properties. Low loads of Cu and Au (1 mol%) were incorporated onto TiO2 via a green photodeposition methodology. Characterization techniques confirmed the incorporation of decoration metals as well as improvements in the light absorption properties in the visible light interval (lambda > 390 nm) and electron transfer capability of the semiconductors. Thereafter, Au and/or Cu NP- supported TiO2 were incorporated into chitosan-based physically crosslinked hydrogels revealing significant interactions between chitosan functional groups (hydroxyls, amines and amides) with the NPs to ensure its encapsulation. These materials were evaluated as photocatalysts for the HER using water and methanol mixtures under simulated sunlight and visible light irradiation. Sample CuAuTiO2/ChTPP exhibited a maximum hydrogen generation of 1790 mu mol g(-1) h(-1) under simulated sunlight irradiation, almost 12-folds higher compared with TiO2/ChTPP. Also, the nanocomposites revealed a similar tendency under visible light with a maximum hydrogen production of 590 mu mol g(-1) h(-1) . These results agree with the efficiency of photoinduced charge separation revealed by transient photocurrent and EIS., O.R. acknowledges ANID doctoral scholarship number 21191002. H. G. thanks Ayuda RYC2022-037287-I financiada por MCIN/AEI/10.13039/501100011033 y por El FSE invierte en tu futuro. C.S. thanks FONDECYT project 121022. S.N. thanks the support of grant PID2021-123856OBI00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. A.L. thanks to FONDECYT project number 1211122 and FONDAP 1522A006, for financial support for the research. D.D.D. thanks the Spanish Government for the following projects: TED2021-132847B I00/AEI/10.13039/501100011033/Union Europea NextGenerationEU/PRTR and PID2022-142118OB-I00/MCIN/AEI/10.13039/501100011033/UE. D.D.D. also thanks Nanotec, INTech, Cabildo de Tenerife and ULL for laboratory facilities.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hetero-functionalization of polyitaconates for developing improved polymer dielectrics: Merging sulfones with bulky/rigid cycles

  • Bonardd, Sebastián
  • Maiz, Jon
  • Alegría, Ángel
  • Pomposo, José A.
  • Verde-Sesto, Ester
  • Kortaberria, Galder
  • Díaz Díaz, David
This work addresses the preparation of new polymer dielectrics working under the dipolar glass polymer (DGP) concept. Herein, we report the synthesis and characterization of four hetero-functionalized polyitaconates bearing sulfones as high dipole moment entities and norbornane or adamantane structures responsible for increasing the glass transition temperature (Tg) and thus the range of temperatures where they can work without degrading or showing high energy dissipation. As a result, all obtained polymers exhibited dielectric constants (εr’) between 5.1 and 6.2 while presenting low loss factors (Tan(δ) < 0.01), reaching the status of high-dielectric polymers with a low dissipative behavior. In addition, it was demonstrated that including bulky structures into their polymer backbone allows for an increase of up to 80 °C in their working temperature ranges, expanding the temperature range where they behave as DGPs in an outstanding manner. A complete structural, thermal and dielectric characterization was carried out in terms of infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), thermogravimetry (TGA), differential scanning calorimetry (DSC) and broad dielectric spectroscopy (BDS). Overall, these materials seem to fulfill the basic requirements to be considered good candidates for dielectric applications such as energy storage, confirming the versatility of polyitaconate-based materials., The Polymers & Soft Matter team acknowledges the funding provided by Grant No. PID2021-123438NB-I00 from MCIN/AEI/10.13039/501100011033, as well as the support from “ERDF A way of making Europe,” Grant No. TED2021-130107 A-I00, also funded by MCIN/AEI/10.13039/501100011033, and Unión Europea “NextGenerationEU/PRTR.” Additionally, we acknowledge the financial support from Eusko Jaurlaritza under code: IT1566-22 and Gipuzkoako Foru Aldundia, Programa de Red Guipuzcoana de Ciencia,Tecnología e Innovación, code: 2023-CIEN-000069-01. G. K. thanks to Ministerio de Ciencia, Innovacion y Universidades, grant number PID2021-126417NB-I00 and by the Gobierno Vasco/Eusko Jaurlaritza, grant number IT1690-22. D. D. D. thanks the Spanish Ministry of Science, Innovation and Universities for the grants TED2021-132847B-I00 and PID2019-105391GB-C21 funded by MCIN/AEI/10.13039/501100011033 and NANOtec, INTech, Cabildo de Tenerife and ULL for laboratory facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unlocking the potential of Opuntia species mucilage in chemistry

  • García Martín, Cristina del Mar
  • Ramírez, Óscar
  • Bonardd, Sebastián
  • López-Darias, Marta
  • Franco, Lourdes
  • M'Rabet, Yassine
  • Khwaldia, Khaoula
  • Díaz Díaz, David
Herein, we describe a detailed protocol to extract the mucilage from different species of the genus Opuntia spp. (i.e., Opuntia Ficus (OFi), Opuntia Dillenii (ODi) and Opuntia Robusta (ORo)). The extracted mucilage was characterized by NMR, FTIR-ATR, HPLC, and TGA. OFi was found to have the highest phenolic content, 7.84 ± 1.93 mg catechol/g mucilage. The mucilage from the three species were characterized by having a high content of monosaccharides, being mannose and glucose the most abundant components (ca. 48–73 % and 23–35 %, respectively). In the context of biomass revalorization, the mucilage was proven to serve as a reducing and stabilizing agent in the synthesis of gold nanoparticles (AuNP/mucilage). The synthesis was optimized with a mucilage concentration of 2 mg/mL using 12.5 μL of KAuCl4 and was carried out at 80 °C for 90 min. This protocol afforded spherical nanoparticles with an average size of 9.7 ± 4.0 nm that were stable for at least 14 days, as demonstrated by TEM. Synthesized AuNP/mucilage was evaluated as a plasmonic catalyst for the reduction of 4-nitrophenol as model reaction, showing a considerable enhancement in its kapp of 97 % under white light and a decrease of 24.8 % in its activation energy., D. D. D. thanks the Spanish Ministry of Science, Innovation and Universities for the projects TED2021-132847B I00/AEI/10.13039/501100011033/Unión Europea NextGenerationEU/PRTR and PID2022-142118OB-I00/MCIN/AEI/10.13039/501100011033/UE, and NANOtec, INTech, Cabildo de Tenerife and ULL for laboratory facilities. The authors thank José Ignacio Hernández García (ULL) for assistance during the collection and trituration of OFi, Dr. Beatriz Gil Hernández (ULL) for assistance with IR equipment, Ms. Rachel Torkhani (INRAP, Tunisia) for technical support during HPLC-RID analysisand Dr. Jordi Puggali (UPC) for preliminary thermal analyses., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combining linear and cyclic sulfones as a strategy for elaborating more efficient high-dielectric polymer materials: A second case of dipolar glass copolymers

  • Bonardd, Sebastián
  • Alegría, Ángel
  • Maiz, Jon
  • Díaz Díaz, David
Motivated by the excellent features exhibited by sulfone functional groups in the development of high-dielectric polymer materials, this work assesses the combination of linear and cyclic sulfone structures through copolymerization to prepare novel polymer materials exhibiting high dielectric constants (ԑr'), low dissipative behavior, and improved thermal properties. Five new polymethacrylate-based copolymers with varying compositions were synthesized through reversible addition-fragmentation chain transfer (RAFT) polymerization. The correct structure and macromolecular nature of the devised materials were confirmed by infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (1H/13C NMR), and gel permeation chromatography (GPC), while their thermal properties were evaluated using thermogravimetry analysis (TGA) and differential scanning calorimetry (DSC). All specimens exhibited adequate thermal properties for most capacitor applications in terms of onset degradation (Ti) and glass transition (Tg) temperatures. All materials degraded well above 250 °C, with increased Ti and Tg values depending on the final composition of the cyclic sulfone monomer in the material. The incorporation of cyclic sulfones not only increased the thermal robustness of the specimens but also raised their Tg values to as high as 189 °C, notably expanding the range of temperatures where these systems can operate without dissipative phenomena. More importantly, broadband dielectric spectroscopy (BDS) revealed that all samples exhibited dielectric properties notably superior to those of conventional polymer materials, with high ԑr' values between 6.0 and 8.9 (at 25 °C and 1 Hz) and low loss factors (Tan(δ) < 0.018). Overall, the present work successfully demonstrates the advantages of including cyclic structures with high dipole moments in polymeric backbones, offering a new strategy to enhance the thermal and dielectric properties of high-dielectric polymer materials., D. D. D. and S. B. thanks the Spanish Government for the projects TED2021-132847B I00/AEI/10.13039/501100011033/Unión Europea NextGenerationEU/PRTR and PID2022-142118OB-I00/MCIN/AEI/10.13039/501100011033/UE. D.D.D. also thanks Nanotec, INTech, Cabildo de Tenerife and ULL for laboratory facilities. Grant No. TED2021-130107A-I00 funded by MICIU/AEI/10.13039/501100011033 and “European Union NextGenerationEU/PRTR” is acknowledged by J. M. and S. B. Additionally, financial support from Gipuzkoako Foru Aldundia through the Programa de Red Guipuzcoana de Ciencia, Tecnología e Innovación (code: 2023-CIEN-000069-01) is also acknowledged by J. M. and S. B. Also, A.A. and J. M. gratefully acknowledge the Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe and the Grant IT-1566-22 from Eusko Jaurlaritza (Basque Government)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing light energy harvesting and storage properties of cellulose acetate/azobenzene films through perylene photosensitization

  • Castillo, Pablo
  • Ramos, Felipe
  • Kremer-Seitz, Constanza
  • Ramírez, Óscar
  • Bonardd, Sebastián
  • Díaz Díaz, David
  • Leiva, Ángel
  • Saldías, César
This study presents a straightforward approach to enhancing the light energy capture and storage properties of cellulose acetate/azobenzene (CA/Azb) films through photosensitization with a perylene derivative (Py). The films' photoisomerization (trans-to-cis) and reverse isomerization (cis-to-trans) behaviors were evaluated under cold white LED light. Incorporating varying concentrations of perylene significantly improved the films' optical performance and energy storage capacity. Notably, the photoisomerization time of CA/Azb/Py films decreased by up to 30% compared to CA/Azb films. Furthermore, the energy storage half-life for films with the highest perylene content reached 70 minutes, substantially longer than that of CA/Azb films (24 minutes). Remarkably, the energy density of the film with the highest perylene content reached 240 J g⁻¹, which is more than 1.7 times higher than that of the CA/Azb film (138 J g⁻¹)., The authors thank FONDECYT projects 1211022 (C.S.). D.D.D. thanks the Spanish Government for the following projects: TED2021-132847B-I00/AEI/10.13039/501100011033/Unión Europea NextGenerationEU/PRTR and PID2022-142118OB-I00/MCIN/AEI/10.13039/501100011033/UE. D. D. D. also thanks NANOtec, INTech, Cabildo de Tenerife and ULL for laboratory facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrasound-enhanced gelation of stimuli-responsive and biocompatible phenylalanine-derived hydrogels

  • Buxaderas, Eduardo
  • Moglie, Yanina
  • Figueroa Baz, Aarón
  • Alegre-Requena, Juan V.
  • Grijalvo, Santiago
  • Saldías, César
  • Herrera, Raquel P.
  • Marqués-López, Eugenia
  • Díaz Díaz, David
This article belongs to the Special Issue Gels: 10th Anniversary., Stimuli-responsive materials, particularly supramolecular hydrogels, exhibit a dynamic adaptability to external factors such as pH and ultrasound. Among these, phenylalanine (Phe)-derived hydrogels are promising due to their biocompatibility, biodegradability, and tunable properties, making them ideal for biomedical applications. This study explores the effects of pH and ultrasound on the gelation properties of <i>N</i>-substituted Phe derivatives, with a primary focus on the role of ultrasound in optimizing the gelation process. A series of <i>N</i>-substituted Phe derivatives were synthesized via reductive amination and hydrolysis. Hydrogel formation was possible with two of these compounds, namely <b>G1</b> and <b>G2</b>, using the following two methods: heating–cooling (H–C) and heating–ultrasound–cooling (H–US–C). The critical gelation concentration (CGC), gelation kinetics, thermal stability (<i>T</i><sub>gel</sub>), and viscoelastic properties were assessed. Morphological and cytotoxicity analyses were performed to confirm the suitability of these gels for biomedical applications. Both <b>G1</b> and <b>G2</b> derivatives demonstrated enhanced gelation under the H–US–C protocol compared to H–C, with notable reductions in CGC (up to 47%) and gelation time (by over 90%). Ultrasound-induced gels led to an improved network density and stability, while maintaining thermal reversibility and mechanical properties comparable to those of hydrogels formed without ultrasound. Cytotoxicity studies confirmed a high biocompatibility, with cell viability rates above 95% across the tested concentrations. Given the similar rheological and morphological properties of the hydrogels regardless of the preparation method, drug release experiments were performed with representative gel samples and demonstrated the efficient encapsulation and controlled release of 5-fluorouracil and methotrexate from the hydrogels, supporting their potential as pH-responsive drug delivery platforms. This study highlights the role of ultrasound as a powerful tool for accelerating and optimizing the gelation process of supramolecular hydrogels, which is particularly relevant for applications requiring rapid gel formation. The developed Phe-based hydrogels also demonstrate promising characteristics as drug delivery systems., The authors thank Ministerio de Ciencia, Innovación y Universidades and Agencia Estatal de investigación for the projects TED2021-132847B-I00/AEI/10.13039/501100011033/Unión Europea NextGenerationEU/PRTR, PID2022-142118OB-I00/MCIN/AEI/10.13039/501100011033/UE, PID2020-117455GB-I00 and PID2023-147471NB-I00 funded by MICIU/AEI10.13039/501100011033, and Gobierno de Aragón-Fondo Social Europeo (Research Group E07_23R). Y.M. thanks the Spanish Government for a María Zambrano postdoctoral grant. D.D.D. thanks Y.M.M.-T. for preliminary experiments and NANOtec, INTech, Cabildo de Tenerife and ULL for laboratory facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Poly(ionic liquid)-based hydrogel for emerging pollutant removal and controlled drug delivery

  • Ramírez, Óscar
  • Castillo, Sebastián
  • Bonardd, Sebastián
  • Saldías, César
  • Díaz Díaz, David
  • Leiva, Ángel
In this study, we report the synthesis and characterization of a set of poly(ionic liquid) (PIL)-based gel membranes formed by the reaction of poly(4-vinylpyridine) (P4VPy) with a terminal dibrominated poly(ethylene glycol) (PEG), which led to the formation of quaternized pyridines as cross-linking joints. First, for hydrogel synthesis, PEG terminal hydroxyls were brominated and subsequently reacted with P4VPy, resulting in the formation of ionic liquid (IL)-like moieties within the hydrogel network. Modified PEG and PIL-based membranes were characterized by Nuclear Magnetic Resonance (NMR), Fourier-Transform Infrared (FT-IR), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC), as well as their swelling and adsorption properties. FT-IR spectroscopy confirmed the quaternization of the pyridine pendant groups of P4VPy by the appearance of a band at 1639 cm–1 due to the presence of pyridinium units. Thermal characterization revealed a decrease in the thermal stability of the membranes with respect to the starting materials, probably ascribed to the presence of charged species inside the cross-linked matrix. Furthermore, DSC characterization revealed that the P4VPy:PEG ratio and degree of cross-linking strongly affected the amount of non-freezable water. Swelling experiments of the hydrogels revealed a swelling ratio value (% SW) near 297% after 2 h of hydration, showing remarkable recyclability over multiple hydration and drying cycles. Finally, sodium diclofenac (DCl) and methyl orange (MO) adsorption experiments revealed the remarkable ability of the hydrogels to remove pollutants from water, with qmax values of 166.7 and 218.8 mg/g, respectively. Finally, a hydrogel loaded with DCl was used as a model system for drug release experiments, in which the hydrogel was able to release almost 70% of DCl to the medium within 1 day of exposure. This process is controlled mainly by a polymer relaxation mechanism and influenced by the temperature of the experiment, showing great potential for reuse in further experiments and also as an interesting platform for controlled drug release., O.R. and S.C. are thankful for the ANID doctoral scholarships 21191002 and 21220998, respectively. S.B. is thankful for the financial support from Gipuzkoako Foru Aldundia through the Programa de Red Guipuzcoana de Ciencia, Tecnología e Innovación (code: 2023-CIEN-000069-01). C.S. and A.L. are thankful for projects ANID FONDECYT 1211022 and 1211124, respectively. D.D.D. thanks the Spanish Government for the following projects: TED2021-132847BI00/AEI/10.13039/501100011033/Unión Europea NextGenerationEU/PRTR and PID2022-142118OB-I00/MCIN/AEI/103039/501100011033/UE. D.D.D. also thanks Nanotec, INTech, Cabildo de Tenerife, and ULL for laboratory facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Easy formation of AuPt nanoalloys on chitosan films and their synergistic effects in the catalyzed reduction of p-nitrophenol and hydrolysis of ammonia-borane

  • Ramírez, Óscar
  • Abarca, Gabriel
  • Mejías, Nayara
  • Leiva, Ángel
  • Saldías, César
  • Díaz Díaz, David
  • Bonardd, Sebastián
AuPt bimetallic nanoparticles supported on chitosan films were successfully obtained via a co-adsorption and co-reduction approach, supported by the excellent ability of chitosan to interact with and retain Au3+ and Pt2+ ions. The protocol enables the production of mostly spherical mono- and bimetallic nanoparticles, featuring average diameters ranging between 2.0 and 3.0 nm while maintaining narrow size distributions. The catalytic properties of nanocomposites were tested via the reduction of 4-nitrophenol (4-NP) and confirmed by the hydrolysis of ammonia borane (AB). The catalytic response of bimetallic samples was significantly higher than monometallic ones, with kinetic constants 5.0 and 3.0 times greater for 4-NP reduction and AB hydrolysis, respectively, alongside higher conversions (> 95 %) and turn-over frequency (TOF) values. Since all specimens exhibited similar metal content (⁓10 w/w %) and comparable nanoentities in size, morphology, and dispersion, the above results could be associated with an electronic synergism originating from the alloying process, enhancing the rate of limiting steps in both reactions. Additionally, the use of chitosan as support facilitates easy catalyst recovery, enabling its use for up to five successive catalytic runs without showing a noticeable decline in performance., S. B thanks the financial support from Gipuzkoako Foru Aldundia through the Programa de Red Guipuzcoana de Ciencia, Tecnología e Innovación (code: 2023-CIEN-000069-01). C. S. gratefully thanks to ANID-Fondecyt grant N°1211022. A. L. thanks to ANID-Fondecyt grant N°1211124. D. D. D. and S. B. thank the Spanish Government for the projects TED2021–132847B I00/AEI/10.13039/501100011033/Unión Europea NextGenerationEU/PRTR and PID2022-142118OB-I00/MCIN/AEI/10.13039/501100011033/UE, and Nanotec, INTech, Cabildo de Tenerife and ULL for laboratory facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

LED-induced photoactivity of self-supporting chitosan-azobenzene films for light energy harvesting/storage

  • Kremer-Seitz, Constanza
  • Castillo, Pablo
  • Tundidor-Camba, Alain
  • Ramírez, Óscar
  • Bonardd, Sebastián
  • Díaz Díaz, David
  • Leiva, Ángel
  • Saldías, César
In this report, we conducted the synthesis, fabrication, and characterization of chitosan-azobenzene films using the solvent evaporation method. The samples were characterized through thermogravimetric analysis, differential scanning calorimetry, contact angle measurements, atomic force microscopy, and ultraviolet‒visible spectroscopy. The main goal of this study was to investigate the photoactivity of chitosan-azobenzene films utilizing LED light as a radiation source. Remarkably, employing both ultraviolet and visible light allowed us to witness the photoisomerization phenomenon of azobenzene, i.e., the direct process (trans → cis), in the films. Moreover, we investigated the reverse process (cis → trans) in the absence of light. Interestingly, this step can be executed in darkness, indicating zero energy demand for this phase of the process. The results indicated that these self-supporting materials are capable of harvesting and storing light energy., The authors thank FONDECYT projects 1211022 (C.S.) and 1230077 (A. T-C.). FONDAP project 1523A0006 is also acknowledged (A.L.). D. D. D. thanks the Spanish Government for the following projects: TED2021-132847B-I00/AEI/https://doi.org/10.13039/501100011033/Unión Europea Next Generation EU/PRTR and PID2022-142118OB-I00/MCIN/AEI/https://doi.org/10.13039/501100011033/UE. D. D. D. also thanks NANOtec, INTech, Cabildo de Tenerife and ULL for laboratory facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reversible supramolecular hydrogel for air-tolerant photon upconversion: Key development for photocatalyst recovery and product extraction in aqueous medium

  • Domínguez Domínguez, Paola
  • Kuge, Keita
  • Shoyama, Hayato
  • Mizukami, Kiichi
  • Sasaki, Yoichi
  • Bonardd, Sebastián
  • Kimizuka, Nobuo
  • Díaz Díaz, David
The development of upconversion hydrogels that operate in water and under aerobic conditions remains a significant challenge, especially when postreaction separation and component recovery are needed. Here, we present the first supramolecular photocatalytic hydrogel based on a low-molecular-weight gelator (LMWG) that enables green-to-blue triplet–triplet annihilation upconversion (TTA-UC) in aerated water. The hydrogel forms through the coassembly of the LMWG, surfactant, and a sensitizer/emitter pair (PtOEP/DPAS), giving rise to nanostructured compartments that protect long-lived excited triplet states from oxygen quenching. Unlike previous systems based on biopolymers or covalent networks, this supramolecular gelation is fully reversible, allowing the photochemical reaction to be carried out in situ, followed by gel disassembly for the easy extraction of reaction products without the need for heat. Notably, up to 77% of the precious Pt-based sensitizer can be recovered from the gel matrix. This modular, recyclable platform offers an approach to performing photochemical transformations under mild and environmentally friendly conditions, with advantages over previous air-stable UC hydrogels in terms of reusability, extractability, and operational simplicity., D.D.D. acknowledges the Ministry of Science and Innovation projects PID2019-105391GB-C21/AEI/10.13039/501100011033, TED2021-132847BI00/AEI/10.13039/501100011033/Unión Europea NextGenerationEU/PRTR and PID2022-142118OB-I00/MCIN/AEI/10.13039/501100011033/UE, Cátedra de Medioambiente y Sostenibilidad (Cabildo de Tenerife-ULL), and Fundación Ramón Areces for financial support. P.D.D. thanks the Ministry of Science and Innovation for a predoctoral fellowship PRE2020-094108. S.B. acknowledges the Canarian Agency for Research, Innovation and Information Society (ACIISI) for funding his “Viera y Clavijo” postdoctoral contract. D.D.D. also thanks Nanotec, INTech, Cabildo de Tenerife and ULL for laboratory facilities. N.K. acknowledges the financial support of JSPS KAKENHI grant number JP20H05676., Peer reviewed