Pasar al contenido principal

REDES DINAMICAS EN MATERIA BLANDA: DE LAS MOLECULAS PEQUEÑAS A LOS POLIMEROS COMPLEJOS

PID2021-123438NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DEL PAIS VASCO EUSKAL HERRIKO UNIBERTSITATEA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 60
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of composition on the crystal texture and on the dynamics of P(THF-co-ECH) copolymers

  • Maiz, Jon
  • Verde-Sesto, Ester
  • Asenjo-Sanz, Isabel
  • Juranyi, Fanni
  • Pomposo, José A.
  • Arbe, Arantxa
  • Colmenero de León, Juan
QENS/WINS 2022 – 15th Edition of the QENS Series and 10th of the WINS Workshops., We present a combined study by quasielastic neutron scattering (QENS), differential scanning calorimetry (DSC) and wide angle X-ray scattering (WAXS) on poly(tetrahydrofuran-co-epichlorohydrin) copolymers, to see how their composition can be used to tune their crystallizability and to elucidate the impact of this factor on the dynamical properties. QENS reveals a strong effect on the local dynamics upon cooling down, where the local motions of a sample that remains in the supercooled state at lower temperatures are less Gaussian and slower than those in a sample that crystallizes a few degrees below. This can be attributed to the enhancement of local heterogeneities in the former, which could be a determining factor preventing crystallization., We acknowledge the Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. We also acknowledge the financial support of Eusko Jaurlaritza, code : IT-1566-22 and from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and the Materials Physics Center on behalf of the Department of Education of the Basque Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microscopic versus macroscopic glass transition(s) in blends of industrial interest

  • Shafqat, Numera
  • Alegría, Ángel
  • Malicki, Nicolas
  • Dronet, Séverin
  • Mangin-Thro, Lucile
  • Frick, Bernhard
  • Colmenero de León, Juan
  • Arbe, Arantxa
QENS/WINS 2022 – 15th Edition of the QENS Series and 10th of the WINS Workshops., We investigate by neutron scattering and calorimetry a mixture of styrene-butadiene rubber (SBR) and a commercial resin. The neat materials present a large dynamic contrast, having SBR a much lower glass-transition temperature than the resin. The focus is to exploit neutron scattering selectivity in an isotopically labelled sample where deuterated SBR is the majority component. This direct insight into the resin atomic motions within the mixture allows determining the ‘microscopic’ glass transition of the resin in the presence of the a priori much more mobile SBR. This transition takes place in the vicinity of the initial calorimetric glass transition temperature, mainly dictated by the majority component., We acknowledge the Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. We also acknowledge financial support of Eusko Jaurlaritza, code: and IT1566-22, as well as from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and the Materials Physics Center on behalf of the Department of Education of the Basque Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Neat protein single-chain nanoparticles from partially denatured BSA

  • Malo de Molina, Paula
  • Le, Thu Phuong
  • Iturrospe, Amaia
  • Gasser, Urs
  • Arbe, Arantxa
  • Colmenero de León, Juan
  • Pomposo, José A.
The main challenge for the preparation of protein single-chain nanoparticles (SCNPs) is the natural complexity of these macromolecules. Herein, we report the suitable conditions to produce “neat” bovine serum albumin (BSA) single-chain nanoparticles (SCNPs) from partially denatured BSA, which involves denaturation in urea and intramolecular cross-linking below the overlap concentration. We use two disuccinimide ester linkers containing three and six methylene spacer groups: disuccinimidyl glutarate (DSG) and disuccinimidyl suberate (DSS), respectively. Remarkably, the degree of internal cross-linking can be followed simply and efficiently via 1H NMR spectroscopy. The associated structural changes─as probed by small-angle neutron scattering (SANS)─reveal that the denatured protein has a random-like coil conformation, which progressively shrinks with the addition of DSG or DSS, thus allowing for size control of the BSA-SCNPs with radii of gyration down to 5.4 nm. The longer cross-linker exhibits slightly more efficiency in chain compaction with a somewhat stronger size reduction but similar reactivity at a given cross-linker concentration. This reliable method is applicable to a wide range of compact proteins since most proteins have appropriate reactive amino acids and denature in urea. Critically, this work paves the way to the synthesis of “neat”, biodegradable protein SCNPs for a range of applications including nanomedicine., The authors acknowledge the financial support received from the IKUR Strategy under the collaboration agreement between the Ikerbasque Foundation and the Materials Physics Center on behalf of the Department of Education of the Basque Government. Financial support by MCIN/AEI/10.13039/ 501100011033 and “ERDF−A way of making Europe” (grant PID2021-123438NB-I00), Eusko Jaurlaritza−Basque Government (grantIT-1566-22) and the Gipuzkoako Foru Aldundia, Programa Red Gipuzkoana de Ciencia, Tecnología e Innovación (2021-CIEN-000010-01) is gratefully acknowledged. A.I. thanks MICINN for a Personal Técnico de Apoyo contract (PTA2017-14359-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Statistical thermodynamics in reversible clustering of gold nanoparticles. A first step towards nanocluster heat engines

  • Mezzasalma, Stefano Antonio
  • Kruse, Joscha
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Grzelczak, Marek
A statistical thermodynamics variational criterion is propounded to study thermal hysteresis in reversible clustering of gold (Au) nanoparticles. Experimentally, a transient equilibrium mapping analysis is employed to characterize it thermodynamically, further measurements being performed at the nanostructural and electrochemical levels (UV-Vis-NIR spectra, SLS/SAXS, zeta potential). Theoretically, it is successfully interpreted as a thermodynamic cycle, prompting that nanoclusters has potential to produce useful work from heat and paving the way to nanoclustering heat engines. By taking into account the virial expansion of hysteretic pressure, an entropy measure is deduced for a dilute system with given virial coefficients. This allows us to figure out the role of relevant interparticle potential parameters (i.e. surface potential, nanoparticle size, Debye’s length, Hamaker energy) in both isothermal and isochoric variations at the onset of hysteresis. Application to spherical Au nanoparticles in watery salt solution (NaCl) is developed when an ad-hoc (DLVO) pairwise potential governs the second virial coefficient at the nanoscale. In particular, the variational criterion predicts a pressure drop between heating and cooling paths which is likely at the base of some energy redistribution (e.g. ordering/restructuring of electric double layers). We found an integrating factor that is able to numerically predict the existence of a critical value for the initial salt concentration maximizing the hysteretic area, and the effect of nanoparticle size on the cycle extent., A.A. and A.I acknowledge the Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, as well as financial support of Eusko Jaurlaritza, code: IT-1566-22 and from the IKUR Strategy. A. I. thanks MICINN for a Personal Técnico de Apoyo contract (PTA2017-14359-I). Correspondence of one of the authors (S.A.M.) with Dezső Boda (IASK/UP - Hungary) is kindly acknowledged. This work was supported by grant PID2019-111772RB-I00 funded by MCIN/AEI/ 10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding the coherent dynamic structure factor of liquid water measured by neutron spectroscopy with polarization analysis: a Molecular Dynamics simulations study

  • Álvarez González, Fernando
  • Arbe, Arantxa
  • Colmenero de León, Juan
QENS/WINS 2022 – 15th Edition of the QENS Series and 10th of the WINS Workshops., This work is focused on atomistic molecular dynamics (MD) simulations of water carried out at 300 K. The main goal is to better understand the experimental results of the coherent dynamic structure factor S(Q,ν) of D2O that were obtained by means of neutron scattering with polarization analysis and previously reported by us [A. Arbe et al. Phys. Rev. Res. 2, 022015 (2020)]. From the simulations, we have calculated the coherent dynamic structure factor in the time domain S(Q,t) as well as its selfand distinctcontributions. We have also calculated S(Q,t) corresponding to a H2O sample. The main results obtained are: (i) The Q-independent relaxation process identified in S(Q,ν) in the mesoscopic range (Q0-mode) is the responsible of the restructuring of the hydrogen bond (HB) network at times shorter than that corresponding to the molecular diffusion; (ii) the vibrational contribution identified at high frequency in S(Q,ν) corresponds to a hydrodynamic-like mode propagating in an elastic medium (fixed HB bonding pattern); (iii) in the crossover range from mesoscopic to intermolecular scales, diffusion also progressively contributes to the decay of density fluctuations; (iv) MD-simulations suggest that it would be basically impossible to measure S(Q,ν,) of H2O in the mesoscopic range with the current neutron scattering capabilities., We acknowledge the Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. We also acknowledge financial support of Eusko Jaurlaritza, code: and IT1566-22, as well as from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and the Materials Physics Center on behalf of the Department of Education of the Basque Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Disentangling the calorimetric glass-transition trace in polymer/oligomer mixtures from the modeling of dielectric relaxation and the input of small-angle neutron scattering

  • Shafqat, Numera
  • Alegría, Ángel
  • Arbe, Arantxa
  • Malicki, Nicolas
  • Dronet, Séverin
  • Porcar, Lionel
  • Colmenero de León, Juan
We have disentangled the contributions to the glass transition as observed by differential scanning calorimetry (DSC) on simplified systems of industrial interest consisting of blends of styrene–butadiene rubber (SBR) and polystyrene (PS) oligomer. To do this, we have started from a model previously proposed to describe the effects of blending on the equilibrium dynamics of the α-relaxation as monitored by broadband dielectric spectroscopy (BDS). This model is based on the combination of self-concentration and thermally driven concentration fluctuations (TCFs). Considering the direct insight of small-angle neutron scattering on TCFs, blending effects on the α-relaxation can be fully accounted for by using only three free parameters: the self-concentration of the components φselfSBR and φselfPS) and the relevant length scale of segmental relaxation, 2Rc. Their values were determined from the analysis of the BDS results on these samples, being that obtained for 2Rc ≈ 25Å in the range usually reported for this magnitude in glass-forming systems. Using a similar approach, the distinct contributions to the DSC experiments were evaluated by imposing the dynamical information deduced from BDS and connecting the component segmental dynamics in the blend above the glass-transition temperature Tg (at equilibrium) and the way the equilibrium is lost when cooling toward the glassy state. This connection was made through the α-relaxation characteristic time of each component at Tg, τg. The agreement of such constructed curves with the experimental DSC results is excellent just assuming that τg is not affected by blending., A. Alegría, A. Arbe, and J. Colmenero acknowledge the Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, as well as financial support of Eusko Jaurlaritza, codes IT-1175-19 and IT-1566-22, and from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and the Materials Physics Center on behalf of the Department of Education of the Basque Government., Open Access funding provided by University of Basque Country., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of the TrFE content on the crystallization and SSA thermal fractionation of P(VDF-co-TrFE) copolymers

  • María, Nicolás
  • Le Goupil, Florian
  • Cavallo, Dario
  • Maiz, Jon
  • Müller, Alejandro J.
This article belongs to the Collection State-of-the-Art Macromolecules in Spain., In this contribution, we study the effect of trifluoro ethylene (TrFE) comonomer content (samples with 80/20, 75/25, and 70/30 VDF/TrFE molar ratios were used) on the crystallization in P(VDF-co-TrFE) in comparison with a PVDF (Poly(vinylidene fluoride)) homopolymer. Employing Polarized Light Optical Microscopy (PLOM), the growth rates of spherulites or axialites were determined. Differential Scanning Calorimetry (DSC) was used to determine overall crystallization rates, self-nucleation, and Successive Self-nucleation and Annealing (SSA) thermal fractionation. The ferroelectric character of the samples was explored by polarization measurements. The results indicate that TrFE inclusion can limit the overall crystallization of the copolymer samples, especially for the ones with 20 and 25% TrFE. Self-nucleation measurements in PVDF indicate that the homopolymer can be self-nucleated, exhibiting the classic three Domains. However, the increased nucleation capacity in the copolymers provokes the absence of the self-nucleation Domain II. The PVDF displays a monomodal distribution of thermal fractions after SSA, but the P(VDF-co-TrFE) copolymers do not experience thermal fractionation, apparently due to TrFE incorporation in the PVDF crystals. Finally, the maximum and remnant polarization increases with increasing TrFE content up to a maximum of 25% TrFE content, after which it starts to decrease due to the lower dipole moment of the TrFE defect inclusion within the PVDF crystals., This research was funded by the Basque Government, grant number IT 1503-22. J.M. acknowledges the Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. J.M. also acknowledges the financial support of Eusko Jaurlaritza, code: IT-1566-22., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stars, combs and bottlebrushes of elastic single-chain nanoparticles

  • Arena, Davide
  • Verde-Sesto, Ester
  • Pomposo, José A.
Hierarchical self-assembly of structural elements gives rise to superstructures often with outstanding properties when compared to individual elements, as first observed in nature. While folding of individual synthetic chains leads to discrete single-chain nanoparticles (SCNPs) of significant interest for a number of applications, its full potential utility through integration into well-defined superstructures is recently being recognized. Remarkably, SCNPs in good solvent resemble randomly branched polymers with ideal connectivity in a theta-solvent or percolating clusters with screened excluded-volume interactions. Herein we consider the integration of SCNPs into star, comb and bottlebrush topologies and investigate the dimensions of the resulting superstructures under different conditions (good solvent, ideal conformations, 1D- and 2D-confinement in nanopores and nanoslits, anchored to flat surfaces). A detailed comparison of the equilibrium conformational properties of star, comb and bottlebrush polymers composed of elastic SCNPs to those of equivalent topologies based on linear chains is provided. This analysis reveals the effect of hierarchical topology on superstructure dimensions in several relevant environments, as well as how the structural parameters of the SCNPs influence the location of the comb-to-bottlebrush transition as a function of grafting density. The degree of intra-chain cross-linking arises as an additional parameter for controlling the local and global dimensions of stars, combs and bottlebrushes of SCNPs., Financial support by MCIN/AEI/10.13039/501100011033 and “ERDF – A way of making Europe” (PID2021-123438NB-I00), Eusko Jaurlaritza –Basque Government (IT1566-22) and Gipuzkoako Foru Aldundia, Programa Red Gipuzkoana de Ciencia, Tecnología e Innovación (2021-CIEN-000010-01) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular mobility of polymers at the melting transition

  • Wang, Bao
  • Sanviti, Matteo
  • Alegría, Ángel
  • Napolitano, Simone
Melting of crystals is an archetypical first order phase transition. Albeit extensive efforts, the molecular origin of this process in polymers is still not clear. Experiments are complicated by the tremendous change in mechanical properties and the occurrence of parasitic phenomena masking the genuine material response. Here, we present an experimental procedure permitting to circumvent these issues by investigating the dielectric response of thin polymer films. Extensive measurements on several commercially available semicrystalline polymers allowed us to identify a genuine molecular process associated with the newly formed liquid phase. In line with recent observations of amorphous polymer melts, we show this mechanism─known as the slow Arrhenius process (SAP)─involves time scales longer than those characteristics of segmental mobility and has the same energy barrier of the flow of the melt., B.W. and S.N. acknowledge financial support from Action de Recherche Concertée─ULB under grant ARC 20061 “SADI”. M.S. and A.A. acknowledge funding from the Basque Government, project code: IT-1566-22 and the Spanish Ministry of Science and Innovation, project code: PID2021-123438NB-I00 (MCIU/AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Toward long-term-dispersible, metal-free single-chain nanoparticles

  • Blázquez-Martín, Agustín
  • Ruiz-Bardillo, Ainara
  • Verde-Sesto, Ester
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Pomposo, José A.
This article belongs to the Section Nanofabrication and Nanomanufacturing., We report herein on a new platform for synthesizing stable, inert, and dispersible metal-free single-chain nanoparticles (SCNPs) via intramolecular metal-traceless azide–alkyne click chemistry. It is well known that SCNPs synthesized via Cu(I)-catalyzed azide–alkyne cycloaddition (CuAAC) often experience metal-induced aggregation issues during storage. Moreover, the presence of metal traces limits its use in a number of potential applications. To address these problems, we selected a bifunctional cross-linker molecule, sym-dibenzo-1,5-cyclooctadiene-3,7-diyne (DIBOD). DIBOD has two highly strained alkyne bonds that allow for the synthesis of metal-free SCNPs. We demonstrate the utility of this new approach by synthesizing metal-free polystyrene (PS)-SCNPs without significant aggregation issues during storage, as demonstrated by small-angle X-ray scattering (SAXS) experiments. Notably, this method paves the way for the synthesis of long-term-dispersible, metal-free SCNPs from potentially any polymer precursor decorated with azide functional groups., We gratefully acknowledge Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033; “ERDF A way of making Europe”, Grant TED2021-130107A-I00 funded by MCIN/AEI/10.13039/501100011033; Unión Europea “NextGenerationEU/PRTR” and Grant IT-1566-22 from Eusko Jaurlaritza (Basque Government)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Macrocyclic polymers: Synthesis, purification, properties and applications

  • Ochs, Jordan
  • Pagnacco, Carlo Andrea
  • Barroso-Bujans, Fabienne
Cyclic polymers present a topology that differ significantly from their linear counterparts due to their circular structure and therefore, the lack of chain ends. These simple characteristics are responsible for important unique properties (e.g. lower intrinsic and melt viscosity, lower hydrodynamic volumes, slower degradation profiles, increased blood circulation times and more selective bioaccumulation) thanks to which the cyclic polymers are today a vanguard in macromolecular chemistry. However, the preparation of cyclic polymers with high topological purity and in large quantities is challenging, therefore demanding the continuous development of synthetic methods. Advances in organic chemistry and the development of new catalytic systems has allowed the field of cyclic polymers to expand enormously in recent decades. In this review, ring closure and ring expansion polymerization strategies are described along the milestones that have characterized the evolution of cyclic (bio)polymer chemistry over the years. We also focus on very recent advances and state-of-the-art techniques for the synthesis and purification of cyclic polymers and provide an overview of properties and applications of cyclic polymers in different fields., We gratefully acknowledge the grants PID2021-123438NB-I00, funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”; IT-1566-22 and PIBA 2021_1_0034, funded by the Basque Government; and RED 2021:ID44, funded by Diputación Foral de Guipúzcoa., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reactivity of B(C6F5)3 towards glycidol: The formation of branched cyclic polyglycidol structures

  • Al Assiri, Mohammed Ali
  • Gómez Urreizti, Eric
  • Pagnacco, Carlo Andrea
  • González de San Román, Estíbaliz
  • Barroso-Bujans, Fabienne
B(C6F5)3 is a strong electrophilic catalyst that promote the ring-opening polymerization of a number of epoxides via the formation of zwitterionic growing chains. Cyclic chains frequently are the major component of the reaction, which makes this synthetic route a viable strategy for the generation of cyclic polyethers in large quantities. We present a systematic study on the bulk and quasi-bulk polymerization of glycidol with B(C6F5)3, including kinetic experiments that evidences an abrupt chain growth at high monomer conversions. Ring fusion and branching mechanisms are invoked to explain such phenomenology. Branched cyclic polyglycidols (bcPG) are the major compounds with Mn up to 8 kg/mol and Ð ∼ 2. The glass transition temperature of bcPG exhibits lower values than that of reference linear PG samples likely associated to the dominating effect of branches., We gratefully acknowledge support from the Spanish Ministry “Ministerio de Ciencia e Innovación” (PID2021-123438NB-I00, MICINN/FEDER, UE), Basque Government (IT-1175-19, IT1566-22 and PIBA 2021-1-0034) and Diputación Foral de Guipúzcoa (RED 2021:ID44)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microscopic versus macroscopic glass transitions and relevant length scales in mixtures of industrial interest

  • Shafqat, Numera
  • Alegría, Ángel
  • Malicki, Nicolas
  • Dronet, Séverin
  • Natali, Francesca
  • Mangin-Thro, Lucile
  • Porcar, Lionel
  • Arbe, Arantxa
  • Colmenero de León, Juan
We have combined X-ray diffraction, neutron diffraction with polarization analysis, small-angle neutron scattering (SANS), neutron elastic fixed window scans (EFWS), and differential scanning calorimetry (DSC) to investigate polymeric blends of industrial interest composed by isotopically labeled styrene–butadiene rubber (SBR) and polystyrene (PS) oligomers of size smaller than the Kuhn length. The EFWS are sensitive to the onset of liquid-like motions across the calorimetric glass transition, allowing the selective determination of the “microscopic” effective glass transitions of the components. These are compared with the “macroscopic” counterparts disentangled by the analysis of the DSC results in terms of a model based on the effects of thermally driven concentration fluctuations and self-concentration. At the microscopic level, the mixtures are dynamically heterogeneous for blends with intermediate concentrations or rich in PS, while the sample with highest content of the fast SBR component looks as dynamically homogeneous. Moreover, the combination of SANS and DSC has allowed determining the relevant length scale for the α-relaxation through its loss of equilibrium to be ≈30 Å. This is compared with the different characteristic length scales that can be identified in these complex mixtures from structural, thermodynamical, and dynamical points of view because of the combined approach followed. We also discuss the sources of the non-Gaussian effects observed for the atomic displacements and the applicability of a Lindemann-like criterion in these materials., The authors acknowledge Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, as well as financial support of Eusko Jaurlaritza (code: IT1566-22) and from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and the Materials Physics Center on behalf of the Department of Education of the Basque Government., We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Non-simple flow behavior in a polar van der Waals liquid: Structural relaxation under scrutiny

  • Arrese-Igor, Silvia
  • Alegría, Ángel
  • Colmenero de León, Juan
The non-exponential character of the structural relaxation is considered one of the hallmarks of the glassy dynamics, and in this context, the relatively narrow shape observed by dielectric techniques for polar glass formers has attracted the attention of the community for long time. This work addresses the phenomenology and role of specific non-covalent interactions in the structural relaxation of glass-forming liquids by the study of polar tributyl phosphate. We show that dipole interactions can couple to shear stress and modify the flow behavior, preventing the occurrence of the simple liquid behavior. We discuss our findings in the general framework of glassy dynamics and the role of intermolecular interactions., We acknowledge the financial support of Grant No. PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe,” and Grant No. IT1566-22 funded by the Basque Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mitigation of efflorescence, drying shrinkage and water demand of calcined clay-based geopolymers with biological waste ashes as activator and hardener

  • Oladele, Olajumoke L.
  • Adesanya, Elijah D.
  • Arbe, Arantxa
  • Iturrospe, Amaia
  • Ogundiran, Mary B.
Uncertainties associated with durability and sustainability of geopolymer due to formation of efflorescence, shrinkage and activator cost are setbacks for its real-life applications. Therefore, the aim of this study was to produce geopolymers with improved durability and sustainability using local kaolin clay as precursor, cocoa-pods-ash (CPA) as alternative alkali hydroxide activator, periwinkle-shells-ash (PSA) as hardener and quarry-dust (QD) as filler. Local kaolin clay calcined at 700 °C (M7C), was replaced with some fractions of CPA and activated with only Na2SiO3 to produce binders (CPAG). The PSA was added to the best fit of M7C/CPA as fast-setting-agent, while QD was added to the best fit of M7C/CPA/PSA to produce mortars. 100% kaolin clay activated with 8MNaOH/Na2SiO3 was used as reference geopolymer. The geopolymers were cured at R.T for 7 and 28 days and characterised for physical, mechanical and durability properties. Clay, CPA, PSA, QD and geopolymers were characterised using XRF, ATR-FTIR and XRD. Reactivity was studied using isothermal conduction calorimetry. The ATR-FTIR and XRD results indicated transformation of kaolinite to metakaolinite in the clay, presence of K-C-O bond in CPA and O-C-O bond in PSA. Reference geopolymers set at 4 h while CPAG ranged from 14 to 19 h. With the addition of PSA, setting time reduced to values between 4 and 11 h. The compressive strength of reference geopolymer was 18.1 ± 0.3 MPa at 28 days, while CPAGs values ranged from 23.5 ± 0.3 to 35.6 ± 0.3 MPa. Best compressive strength was achieved with 2% PSA addition. No shrinkage in CPA-containing geopolymers while reference geopolymer had value of 0.03%. Efflorescence tendencies of the CPA-containing geopolymers reduced by 25–75% when compared with reference. Application of CPA as alternative activator improved the mechanical property, durability and sustainability of geopolymers., A. A. And A. I. acknowledge the Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe, as well as financial support of Eusko Jaurlaritza, code: and IT1566-22., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metamorphosis of a commodity plastic like PVC to efficient catalytic single-chain nanoparticles

  • Blázquez-Martín, Agustín
  • Verde-Sesto, Ester
  • Arbe, Arantxa
  • Pomposo, José A.
We perform the conversion of a commodity plastic of common use in pipes, window frames, medical devices, flexible hoses, etc. like polyvinyl chloride (PVC) to single-chain nanoparticles (SCNPs). SCNPs are versatile, protein-mimetic soft nano-objects of growing interest for catalysis, sensing, and nanomedicine, among other uses. We demonstrate that the metamorphosis process -as induced through metal-free click chemistry- leads to well-defined, uniform SCNPs that are stable during storage in the solid state for months. All the conversion process (from PVC isolation to PVC-SCNPs synthesis) can be run in a green, dipolar aprotic solvent and involving, when required, a simple mixture of ethanol and water (1/1 vol.) as non-solvent. The resulting PVC-SCNPs are investigated as recyclable, metalloenzyme-mimetic catalysts for several representative Cu(II)-catalyzed organic reactions. The method could be valid for the metamorphosis and valorization of other commodity plastics in which it is feasible to install azide functional groups in their linear polymer chains., We gratefully acknowledge Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”, Grant TED2021-130107A-I00 funded by MCIN/AEI/10.13039/501100011033 and Unión Europea “NextGenerationEU/PRTR” and Grant IT-1566-22 from Eusko Jaurlaritza (Basque Government)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microscopic evidence for the topological transition in model vitrimers

  • Arbe, Arantxa
  • Alegría, Ángel
  • Colmenero de León, Juan
  • Bhaumik, Saibal
  • Ntetsikas, Konstantinos
  • Hadjichristidis, Nikos
In addition to the glass transition, vitrimers undergo a topological transition from viscoelastic liquid to viscoelastic solid behavior when the network rearrangements facilitated by dynamic bond exchange reactions freeze. The microscopic observation of this transition is elusive. Model polyisoprene vitrimers based on imine dynamic covalent bonds were synthesized by reaction of α,ω-dialdehyde-functionalized polyisoprenes and a tris(2-aminoethyl)amine. In these dynamic networks nanophase separation of polymer and reactive groups leads to the emergence of a relevant length scale characteristic for the network structure. We exploited the scattering sensitivity to structural features at different length scales to determine how dynamical and topological arrests affect correlations at segmental and network levels. Chains expand obeying the same expansion coefficient throughout the entire viscoelastic region, i.e., both in the elastomeric regime and in the liquid regime. The onset of liquid-like behavior is only apparent at the mesoscale, where the scattering reveals the reorganization of the network triggered by bond exchange events. The such determined “microscopic” topological transition temperature is compared with the outcome of “conventional” methods, namely viscosimetry and differential scanning calorimetry. We show that using proper thermal (aging-like) protocols, this transition is also nicely revealed by the latter., A. Arbe, A. Alegría, and J. Colmenero acknowledge the Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, Grant TED2021-130107A-I00 funded by MCIN/AEI/10.13039/501100011033 and Unión Europea “NextGenerationEU/PRTR”, as well as financial support of Eusko Jaurlaritza, code: IT1566-22. S. Bhaumik, K. Ntetsikas, and N. Hadjichristidis gratefully acknowledge the support of King Abdullah University of Science and Technology (KAUST)., Open Access funding is provided by University of Basque Country., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Physical aging in molecular glasses beyond the α relaxation

  • Di Lisio, Valerio
  • Stavropoulou, Vasiliki-Maria
  • Cangialosi, Daniele
The description of kinetics of physical aging, namely the slow evolution of a glass thermodynamic state toward equilibrium, generally relies on the exclusive role of the main α relaxation. Here, we study the kinetics of physical aging over a wide temperature range in five small molecules interacting via van der Waals forces monitoring the time evolution of the glass enthalpic state. To this aim, we employ fast scanning calorimetry, which permits exploring a wide range of aging times. To challenge the role of the α relaxation in the description of physical aging, we employ a model-independent approach, based on the time to reach equilibrium, and a modified version of the single parameter aging model. The latter accounts for the non-linearity of aging making use of the so-called density scaling approach to describe the dependence of the α relaxation time on the glass thermodynamic state. We show that the α relaxation is generally adequate to describe aging at temperatures close to the glass transition and, for lower temperatures, the latest stages of equilibration. In contrast, at low aging temperatures, it fails to catch a wide portion of the time-dependent evolution of the glass thermodynamic state, which is found to be much faster than predicted considering only the α relaxation. Hence, our results and analysis provide compelling arguments that the description of glass equilibration under a wide range of aging conditions is conveyed by different molecular mechanisms, beyond the mere role of the α relaxation., We acknowledge Grant No. PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/5011000 11033 and by “ERDF A way of making Europe”; the financial support of Eusko Jaurlaritza, code: IT1566-22; Grant No. PID2020-114506GB-I00 funded by the Spanish Ministry of Science and Innovation; and Grant No. TED2021-129457B-I00 funded by the Spanish Ministry of Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Segmental dynamics of poly(tetrahydrofuran) cross-linked by click-chemistry: Single-chain nanoparticles vs cross-linked networks

  • Sharifi, Soheil
  • Asenjo-Sanz, Isabel
  • Verde-Sesto, Ester
  • Maiz, Jon
  • Pomposo, José A.
  • Alegría, Ángel
Cross-linked poly(tetrahydrofuran) (PTHF) networks are useful as organic solvent/oil sorbents with high swelling capacity and mechanically robust solid polymer electrolyte membranes for lithium-ion batteries, as well as solid-state calcium ion batteries. Recently, the control of intra-vs intermolecular interactions has attracted significant interest to modulate the properties of dynamic networks involving non-covalent and dynamic covalent bonds. However, to the best of our knowledge, a comparison of the segmental dynamics in polymeric materials prepared exactly from the same precursor polymer through intra-vs intermolecular covalent bonds is still lacking. In this work, we report the dissimilar dynamic properties of PTHF-based materials prepared through intra-vs intermolecular click chemistry (i.e., films of PTHF-based single-chain nanoparticles (SCNPs) vs cross-linked networks). Particularly we observed remarkable similarities in the segmental relaxation time and glass transition temperature value but evident differences in the dynamic heterogeneities. These differences are attributed to the peculiar morphology of the intra-chain collapsed polymer chains (i.e., SCNPs)., We gratefully acknowledge Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”; Grant TED2021-130107A-I00 funded by MCIN/AEI/10.13039/501100011033 and Unión Europea “NextGenerationEU/PRTR”, and Grant IT-1566-22 from Eusko Jaurlaritza (Basque Government). I. A.-S. acknowledges grant PTA2021-021175-I funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Size-dependent vitrification in metallic glasses

  • Di Lisio, Valerio
  • Gallino, Isabella
  • Riegler, Sascha Sebastian
  • Frey, Maximilian
  • Neuber, Nico
  • Kumar, Golden
  • Schroers, Jan
  • Busch, Ralf
  • Cangialosi, Daniele
Reducing the sample size can profoundly impact properties of bulk metallic glasses. Here, we systematically reduce the length scale of Au and Pt-based metallic glasses and study their vitrification behavior and atomic mobility. For this purpose, we exploit fast scanning calorimetry (FSC) allowing to study glassy dynamics in an exceptionally wide range of cooling rates and frequencies. We show that the main α relaxation process remains size independent and bulk-like. In contrast, we observe pronounced size dependent vitrification kinetics in micrometer-sized glasses, which is more evident for the smallest samples and at low cooling rates, resulting in more than 40 K decrease in fictive temperature, Tf, with respect to the bulk. We discuss the deep implications on how this outcome can be used to convey glasses to low energy states., This work has received funding from the projects PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” (D.C.); PID2020-114506GB-I00 funded by the Spanish Minister of Science and Innovation (D.C.); Eusko Jaurlaritza, code: IT-1566-22 funded by The Basque Government (D.C.); TED2021-129457B-I00 funded by the Spanish Minister of Science and Innovation (D.C.); US National Science Foundation through CAREER Award #1921435 (G.K.); the Office of Naval Research under grant N00014-20-1-2200 (J.S.); the German Federation of Industrial Research Associations through grant IGF 21469N (R.B., I.G., and N.N.); and the German Research Foundation through grant DGF GA1721/4-1 (R.B., I.G., and N.N.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of a luminescent cyclic poly(ethylene oxide)-polypyridyl ruthenium complex

  • Aboudzadeh, M. Ali
  • Rodríguez-Fanjul, Vanessa
  • Terenzi, Alessio
  • González de San Román, Estíbaliz
  • Miranda, José Ignacio
  • Pizarro, Ana M.
  • Salassa, Luca
  • Barroso-Bujans, Fabienne
We report the synthesis of a macrocyclic poly(ethylene oxide) (PEO) connected by one [Ru(bpy)3]2+ unit (where bpy = 2,2'-bipyridine), a photoactive metal complex that provides photosensitivity and potential biomedical applications to this polymer structure. The PEO chain provides biocompatibility, water solubility, and topological play. The macrocycles were successfully synthesized by copper-free click cycloaddition between a bifunctional dibenzocyclooctyne (DBCO)-PEO precursor and 4,4'-diazido-2,2'-bipyridine, followed by complexation with [Ru(bpy)2Cl2]. The cyclic product accumulated efficiently in MCF7 cancer cells and exhibited a longer fluorescence lifetime than its linear analogue, likely due to differences in the accessibility of the ligand-centered/intraligand states of Ru polypyridyls in both topologies., We acknowledge financial support from MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” (PID2021-123438NB-I00), the MICINN (PID2020-117766GB-I00), the Basque Government (Eusko Jaurlaritza grants IT1566-22 and PIBA 2021-1-0034), and Diputación Foral de Gipuzkoa (RED 2021:ID44). DIPC and IMDEA Nanociencia received support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (MINECO, Grants CEX2018-000867-S and CEX2020-001039-S, respectively). L.S. thanks the Spanish Multi-MetDrugs network (RED2018-102471-T) for fruitful discussion., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2018-000867-S and CEX2020-001039-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Debye’s model for the dielectric relaxation of liquid water and the role of cross-dipolar correlations. A MD-simulations study

  • Álvarez González, Fernando
  • Arbe, Arantxa
  • Colmenero de León, Juan
By means of massive (more than 1.2 · 106 molecules) molecular dynamics simulations at 300 K we have disentangled self- and cross-dipolar contributions to the dielectric relaxation of liquid water that cannot be experimentally resolved. We have demonstrated that cross dipolar correlations are of paramount importance. They amount for almost a 60% of the total dielectric amplitude. The corresponding relaxation function is a one-step Debye-like function with a characteristic time, τcross, of the order of the phenomenological Debye time, τD. In contrast, the relaxation function corresponding to the self-contribution is rather complex and contains a fast decay related to dipolar librations and a second relaxation step that can be well described by two exponentials: a low-amplitude fast process (τ0 = 0.31 ps) and a main slow process (τself = 5.4 ps) that fully randomizes the dipolar orientation. In addition to dipolar relaxation functions, we have also calculated scattering-like magnitudes characterizing translation and rotation of water molecules. Although these processes can be considered as "jump" processes in the short time range, at the time scale of about τD-τcross, at which the cross-dipolar correlations decay to zero, the observed behavior cannot be distinguished from that corresponding to uncoupled Brownian translational and rotational diffusion. We propose that this is the reason why the Debye model, which does not consider intermolecular dipolar interactions, seems to work at time t ≳ τD., We acknowledge the Grant No. PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe,” Grant No. TED2021-130107A-I00 funded by MCIN/AEI/10.13039/501100011033 and Unión Europea “NextGenerationEU/PRTR,” as well as financial support of Eusko Jaurlaritza, code: IT1566-22 and from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and the Materials Physics Center on behalf of the Department of Education of the Basque Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cool concrete incorporating carbonated Periwinkle Shell: a sustainable solution for mitigating urban heat island effects

  • Goracci, Guido
  • Saeed, Ebtisam
  • Ogundiran, Mary B.
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Aymonier, Cyril
  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
The urban heat island effect has become a critical issue in urban areas, intensifying heat-related problems and increasing energy consumption. A sustainable cement formulation that combines ordinary Portland cement (OPC) with a carbonated aggregate derived from Periwinkle shell powder for the development of an efficient cool material is presented. Through a carbonation process, the aggregate undergoes a transformation, capturing carbon dioxide (CO2) and converting it into calcite. The resulting cement mixture exhibits high solar reflective properties, making it a potential candidate for cool pavement and roof applications. In this study, the raw materials, including the Periwinkle shell powder, were characterized, and the carbonation process was evaluated to quantify the CO2 capture efficiency. Additionally, a real test of the efficiency of this new cement on a roof demonstrated that the material achieved a significant cooling effect, being 6 °C cooler than that with standard OPC at the peak of solar radiation., The project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement no. 964450 (MIRACLE project). Moreover, this work is part of the project TED2021-132074B–C31, funded by MCIN/AEI/10.13039/501100011033 and the EU “NextGenerationEU”/PRTR. A.I. and A.A. acknowledge the grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, grant TED2021-130107A-I00 funded by MCIN/AEI/10.13039/501100011033 and Unión Europea “NextGenerationEU/PRTR”, as well as the financial support of Eusko Jaurlaritza, code: IT1566-22. MBO acknowledges the financial support from the Women for Africa Foundation (Fundación Mujeres por frica), Marid, Spain for the research visit and is grateful to the Director, Centro de Fsica de Materiales, CSIC-UPV/EHU, San Sebastián, Spain for making available the research facilities for the study. We also thank the LTC Green Concrete and the UPV/EHU for the funding of an E. Saeed PhD grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure of single-chain nanoparticles under crowding conditions: A random phase approximation approach

  • Robles-Hernández, Beatriz
  • González-Burgos, Marina
  • Malo de Molina, Paula
  • Asenjo-Sanz, Isabel
  • Radulescu, Aurel
  • Pomposo, José A.
  • Arbe, Arantxa
  • Colmenero de León, Juan
The conformation of poly(methyl methacrylate) (PMMA)-based single-chain nanoparticles (SCNPs) and their corresponding linear precursors in the presence of deuterated linear PMMA in deuterated dimethylformamide (DMF) solutions has been studied by small-angle neutron scattering (SANS). The SANS profiles were analyzed in terms of a three-component random phase approximation (RPA) model. The RPA approach described well the scattering profiles in dilute and crowded solutions. Considering all the contributions of the RPA leads to an accurate estimation of the single chain form factor parameters and the Flory–Huggins interaction parameter between PMMA and DMF. The value of the latter in the dilute regime indicates that the precursors and the SCNPs are in good solvent conditions, while in crowding conditions, the polymer becomes less soluble., Financial support by MCIN/AEI/10.13039/501100011033 and “ERDF─A way of making Europe” (grant PID2021-123438NB-I00), Eusko Jaurlaritza─Basque Government (IT-1566-22), Gipuzkoako Foru Aldundia, Programa Red Gipuzkoana de Ciencia, Tecnología e Innovación (2021-CIEN-000010-01), and from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and the Materials Physics Center on behalf of the Department of Education of the Basque Government is gratefully acknowledged. I.A.-S. acknowledges grant PTA2021-021175-I financed by MCIN/AEI/10.13039/501100011033 and “El FSE invierte en tu futuro”., We acknowledge the Open Access funding provided by University of Basque Country., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gold nanoclusters synthesized within single-chain nanoparticles as catalytic nanoreactors in water

  • Pinacho-Olaciregui, Jokin
  • Verde-Sesto, Ester
  • Taton, Daniel
  • Pomposo, José A.
This article belongs to the Section Polymer Chemistry., Metalloenzymes are able to catalyze complex biochemical reactions in cellular (aqueous) media with high efficiency. In recent years, a variety of metal-containing single-chain nanoparticles (SCNPs) have been synthesized as simplified metalloenzyme-mimetic nano-objects. However, most of the metal-containing SCNPs reported so far contained complexed metal ions but not metal nanoclusters (NCs) with diameter <5 nm, which could be used as powerful, emerging catalysts. Herein, we report the synthesis of gold nanoclusters (Au-NCs) within SCNPs and the further use of Au-NCs/SCNPs as catalytic nanoreactors in water. We demonstrate that a common motif contained in several drugs (i.e., the aminophenyl–oxazolidinone fragment present in Rivaroxaban, Sutezolid, and Linezolid) can be efficiently prepared in water from a hydrophobic precursor compound by using the Au-NCs/SCNPs as efficient catalytic nanoreactors. In summary, this work paves the way forthe synthesis of metal–NCs/SCNPs for advanced catalysis in aqueous media., We gratefully acknowledge Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”, Grant TED2021-130107A-I00 funded by MCIN/AEI/10.13039/501100011033 and Unión Europea “NextGenerationEU/PRTR”, and Grant IT-1566-22 from Eusko Jaurlaritza (Basque Government). J. P.-O. acknowledges a predoctoral contract for the completion of his PhD thesis under joint supervision between the University of the Basque Country (UPV/EHU) and the University of Bordeaux (UB)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hetero-functionalization of polyitaconates for developing improved polymer dielectrics: Merging sulfones with bulky/rigid cycles

  • Bonardd, Sebastián
  • Maiz, Jon
  • Alegría, Ángel
  • Pomposo, José A.
  • Verde-Sesto, Ester
  • Kortaberria, Galder
  • Díaz Díaz, David
This work addresses the preparation of new polymer dielectrics working under the dipolar glass polymer (DGP) concept. Herein, we report the synthesis and characterization of four hetero-functionalized polyitaconates bearing sulfones as high dipole moment entities and norbornane or adamantane structures responsible for increasing the glass transition temperature (Tg) and thus the range of temperatures where they can work without degrading or showing high energy dissipation. As a result, all obtained polymers exhibited dielectric constants (εr’) between 5.1 and 6.2 while presenting low loss factors (Tan(δ) < 0.01), reaching the status of high-dielectric polymers with a low dissipative behavior. In addition, it was demonstrated that including bulky structures into their polymer backbone allows for an increase of up to 80 °C in their working temperature ranges, expanding the temperature range where they behave as DGPs in an outstanding manner. A complete structural, thermal and dielectric characterization was carried out in terms of infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), thermogravimetry (TGA), differential scanning calorimetry (DSC) and broad dielectric spectroscopy (BDS). Overall, these materials seem to fulfill the basic requirements to be considered good candidates for dielectric applications such as energy storage, confirming the versatility of polyitaconate-based materials., The Polymers & Soft Matter team acknowledges the funding provided by Grant No. PID2021-123438NB-I00 from MCIN/AEI/10.13039/501100011033, as well as the support from “ERDF A way of making Europe,” Grant No. TED2021-130107 A-I00, also funded by MCIN/AEI/10.13039/501100011033, and Unión Europea “NextGenerationEU/PRTR.” Additionally, we acknowledge the financial support from Eusko Jaurlaritza under code: IT1566-22 and Gipuzkoako Foru Aldundia, Programa de Red Guipuzcoana de Ciencia,Tecnología e Innovación, code: 2023-CIEN-000069-01. G. K. thanks to Ministerio de Ciencia, Innovacion y Universidades, grant number PID2021-126417NB-I00 and by the Gobierno Vasco/Eusko Jaurlaritza, grant number IT1690-22. D. D. D. thanks the Spanish Ministry of Science, Innovation and Universities for the grants TED2021-132847B-I00 and PID2019-105391GB-C21 funded by MCIN/AEI/10.13039/501100011033 and NANOtec, INTech, Cabildo de Tenerife and ULL for laboratory facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Length scale of molecular motions governing glass equilibration in hyperquenched and slow-cooled polystyrene

  • Luo, Jintian
  • Wang, Xiang
  • Tong, Ben
  • Li, Zhiqiang
  • Rocchi, Lorenzo Augusto
  • Di Lisio, Valerio
  • Cangialosi, Daniele
  • Zuo, Biao
Polymer glasses attain thermodynamic equilibrium owing to structural relaxation at various length scales. Herein, calorimetry experiments were conducted to trace the macroscopic relaxation of slow-cooled (SC) and hyperquenched (HQ) polystyrene (PS) glasses and based on detailed comparisons with molecular dynamics probed by dye reorientation, we discussed the possible molecular process governing the equilibration of PS glasses near the glass transition temperatures (Tg). Both SC and HQ glasses equilibrate owing to the cooperative segment motion above a characteristic temperature (Tc) slightly lower than the Tg. In contrast, below the Tc, the localized backbone motion with an apparent activation energy of 290 ± 20 kJ/mol, involving approximately six repeating units, assists equilibrium recovery of PS glasses on the experimentally accessible time scales. The results possibly indicate the presence of an alternative mechanism other than the α-cooperative process controlling physical aging of materials in their deep glassy states., We acknowledge financial support from National Natural Science Foundation of China (Grants 22122306, 22303084, 52373025, and 21973083). D.C. acknowledges Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/5011000 11033 and by “ERDF A Way of Making Europe”; the financial support of Eusko Jaurlaritza, Code IT1566-22; Grant PID2020-114506GB-I00 funded by the Spanish Minister of Science and Innovation; and Grant TED2021-129457B-I00 funded by the Spanish Minister of Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Temperature-modulated reversible clustering of gold nanorods driven by small surface ligands

  • Kruse, Joscha
  • Rao, Anish
  • Sánchez-Iglesias, Ana
  • Montaño-Priede, José Luis
  • Iturrospe, Amaia
  • Lopez, Eneko
  • Seifert, Andreas
  • Arbe, Arantxa
  • Grzelczak, Marek
Temperature-modulated colloidal phase of plasmonic nanoparticles is a convenient playground for resettable soft-actuators or colorimetric sensors. To render reversible clustering under temperature change, bulky ligands are required, especially if anisotropic morphologies are of interest. This study showcases thermoresponsive gold nanorods by employing small surface ligands, bis (p-sulfonatophenyl) phenyl-phosphine dihydrate dipotassium salt (BSPP) and native cationic surfactant. Temperature-dependent analysis in real-time allowed to describe the structural features (interparticle distance and cluster size) as well as thermal parameters, melting and freezing temperatures. These findings suggest that neither covalent Au-S bonds nor bulky ligands are required to obtain a robust thermoresponsive system based on anisotropic gold nanoparticles, paving the way to stimuli-responsive nanoparticles with a wide range of sizes and geometries., MG acknowledges financial support from Spanish MCIN/AEI/ 10.13039/501100011033 (Grant PID2019-111772RB−I00), Department of Education of the Basque Government under project IT1526-22. AS acknowledges financial support by grant CEX2020-001038-M funded by MCIN/AEI/ 10.13039/501100011033. AR acknowledges funding from the Spanish MICIU for Juan de la Cierva (FJC2021-047710-I) fellowship. AII and AA acknowledge the grant PID2021-123438NB−I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”, as well as financial support of Eusko Jaurlaritza, code: IT1566-22. The authors acknowledge the financial support received from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and Materials Physics The authors acknowledge the financial support received from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and Materials Physics Center (MPC) on behalf of the Department of Education of the Basque Government., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2020-001038-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Trimethylsilanol cleaves stable azaylides as revealed by unfolding of robust “Staudinger” single-chain nanoparticles

  • Blázquez-Martín, Agustín
  • Bonardd, Sebastián
  • Verde-Sesto, Ester
  • Arbe, Arantxa
  • Pomposo, José A.
Herein, we disclose a unique and selective reagent for the cleavage of stable azaylides prepared by the nonhydrolysis Staudinger reaction, enabling the on-demand unfolding of robust single-chain nanoparticles (SCNPs). SCNPs with promising use in catalysis, nanomedicine, and sensing are obtained through intrachain folding of discrete synthetic polymer chains. The unfolding of SCNPs involving reversible interactions triggered by a variety of external stimuli (e.g., pH, temperature, light, and redox potential) or substances (e.g., competitive reagents, solvents, and anions) is well known. Conversely, methods for the unfolding (i.e., intrachain disassembly) of SCNPs with stronger covalent interactions are scarce. We show that trimethylsilanol (Me3SiOH) triggers the efficient unfolding of robust “Staudinger” SCNPs with stable azaylide (−N═P−) moieties as intrachain cross-linking units showing exceptional stability toward water, air, and CS2, a standard reagent for azaylides. As a consequence, Me3SiOH arises as a rare, exceptional, and valuable reagent for the cleavage of stable azaylides prepared by the nonhydrolysis Staudinger reaction., We gratefully acknowledge Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”, Grant TED2021-130107A-I00 funded by MCIN/AEI/10.13039/501100011033 and Unión Europea “NextGenerationEU/PRTR” and Grant IT-1566-22 from Eusko Jaurlaritza (Basque Government)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Physical aging and vitrification in polymers and other glasses: Complex behavior and size effects

  • Cangialosi, Daniele
The paradigmatic view on the transformation of a supercooled liquid into a glass, so-called vitrification or glass transition, and the subsequent time evolution of the non-equilibrium glass, addressed as physical aging, relies on the exclusive role of the main α relaxation with super-Arrhenius temperature dependence. The aim of the present review is to carefully scrutinize the wealth of recent experimental results, above all in polymeric glasses, showing the relevance of other relaxational mechanisms in both vitrification and physical aging. While the α relaxation bears dominant role in both phenomena in proximity of the glass transition temperature, Tg, a broad view on a much wider temperature range indicates that vitrification and physical aging are mediated by non-mechanisms of equilibration. This review also shows that a reduction of the typical time scale of equilibration can be achieved in glasses with large free interface, namely with reduced sample size. In this way, fast non-mechanisms of equilibration can be exploited to convey glasses to low energy states in experimentally feasible time scales, thereby attaining information on the existence of the so-called “ideal glass” in small sized samples., We acknowledge the Grant No. PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/5011000 11033 and by “ERDF A way of making Europe,”; the financial support of Eusko Jaurlaritza, code: IT1566-22; the Grant No. PID2020-114506GB-I00 funded by the Spanish Minister of Science and Innovation; and TED2021-129457B-I00 funded by the Spanish Minister of Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Consecutive one-pot alkyne semihydrogenation/alkene dioxygenation reactions by Pt(ii)/Cu(ii) single-chain nanoparticles in green solvent

  • Pinacho-Olaciregui, Jokin
  • Verde-Sesto, Ester
  • Taton, Daniel
  • Pomposo, José A.
This article is part of the themed collection: Nanocatalysis., Heterobimetallic Pt(II)/Cu(II) single-chain polymer nanoparticles (SCNPs) were sequentially synthesized from a polymeric precursor featuring both α-diazo-β-ketoester and naked β-ketoester functional groups. Photoactivated carbene generation at λexc = 365 nm from α-diazo-β-ketoester moieities was triggered for bonding Pt(II) ions from dichloro(1,5-cyclooctadiene)Pt(II) to the polymeric precursor, whereas Cu(II) ions were subsequently incorporated via Cu(II)-(β-ketoester)2 complex formation using Cu(II) acetate. Both intrachain Pt(II) bonding and Cu(II) complexation were found to contribute to the folding of the polymeric precursor generating Pt(II)/Cu(II)-SCNPs as evidenced by infrared spectroscopy, size exclusion chromatography and dynamic light scattering. These heterobimetallic SCNPs proved highly efficient as soft nanocatalysts for the consecutive one-pot alkyne semihydrogenation/alkene dioxygenation reactions at room temperature in N-butylpyrrolidone, as a non-toxic alternative solvent to N,N-dimethylformamide., We gratefully acknowledge Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”, Grant TED2021-130107A-I00 funded by MCIN/AEI/10.13039/501100011033 and Unión Europea “NextGenerationEU/PRTR” and Grant IT-1566-22 from Eusko Jaurlaritza (Basque Government). E.V.-S. acknowledges financial support from RyC program (RYC2022-037590-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Revealing dynamic behavior in high dielectric poly(thiourethane)-based vitrimer-like materials

  • Guerrero-Ruiz, Federico
  • Otaegi, Itziar
  • Verde-Sesto, Ester
  • Bonardd, Sebastián
  • Maiz, Jon
Here, we have explored covalent adaptable networks (CANs) comprising poly(thiourethane)-based systems (PTUs). The PTUs were synthesized through the combination of thiol and isocyanate monomers in stoichiometric proportions, in the presence of dibutyltin dilaurate (DBTDL) as catalyst. Dynamic mechanical analysis (DMA) provided detailed insight into the vitrimeric behavior. Through these investigations, we evaluated the viscoelastic, thermomechanical, and vitrimeric properties. Additionally, broadband dielectric spectroscopy (BDS) revealed the various relaxation processes inherent in such vitrimer-like materials. We methodically examined the evolution of each relaxation in every prepared sample to comprehend the operational mechanisms in these vitrimer-like systems. Our findings underscore that depending on the PTU formulation, the glass transition temperature (Tg) and the topology freezing transition temperature (Tv) can be effectively distinguished and studied. Considering the high dipole moment of the dynamic bonds present in these systems, there is potential for utilizing them as dielectric materials working under the concept of dipolar glass polymers. Furthermore, the reversibility exhibited by their inner chemical structures positions them as promising candidates for active layers in capacitor devices, particularly for energy-related applications, with the ability to be recyclable while maintaining almost invariant both their mechanical and dielectric properties, thus promoting the extension of the lifespan of electronic devices., Grant No. PID2021-123438NB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU, Grant No. TED2021-130107A-I00 funded by MICIU/AEI/10.13039/501100011033, and “European Union NextGenerationEU/PRTR” are acknowledged. Additionally, financial support from Eusko Jaurlaritza (code: IT1566-22) and Gipuzkoako Foru Aldundia through the Programa de Red Guipuzcoana de Ciencia, Tecnología e Innovación (code: 2023-CIEN-000069-01) is acknowledged. E. V.-S. thanks the “Ramón y Cajal” Program Grant No. RYC2022-037590-I funded by MICIU/AEI/10.13039/501100011033 and ESF+ for support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamics of single-chain nanoparticles under crowding: A neutron spin echo study

  • Robles-Hernández, Beatriz
  • Malo de Molina, Paula
  • Asenjo-Sanz, Isabel
  • González-Burgos, Marina
  • Pasini, Stefano
  • Pomposo, José A.
  • Arbe, Arantxa
  • Colmenero de León, Juan
We present a neutron spin echo (NSE) investigation to examine the impact of macromolecular crowding on the dynamics of single-chain nanoparticles (SCNPs), serving as synthetic models for biomacromolecules with flexibility and internal degrees of freedom, such as intrinsically disordered proteins (IDPs). In particular, we studied the dynamics of a medium-size poly(methyl methacrylate) (PMMA)-based SCNP (33 kDa) in solutions with low- (10 kDa) and high- (100 kDa) molecular weight analogous deuterated PMMA linear crowders. The dynamic structure factors of the SCNPs in dilute solution show certain degrees of freedom, yet the analysis in terms of the Zimm model reveals high internal friction that effectively stiffens the chain─a phenomenon also observed for IDPs. Under crowding conditions, the internal dynamics remains essentially unchanged, but the center-of-mass diffusion slows down. The effective viscosity felt by the SCNPs at the timescales probed by NSE is lower than the macroscopic viscosity of the crowder solution, and it does not depend significantly on the molecular weight., Financial support by MCIN/AEI/10.13039/501100011033 and “ERDF–A way of making Europe” (Grant PID2021-123438NB-I00), Eusko Jaurlaritza–Basque Government (IT-1566-22), Gipuzkoako Foru Aldundia, Programa Red Gipuzkoana de Ciencia, Tecnología e Innovación (2021-CIEN-000010-01), and from the IKUR Strategy under the collaboration agreement between the Ikerbasque Foundation and the Materials Physics Center on behalf of the Department of Education of the Basque Government is gratefully acknowledged. I.A.-S. acknowledges grant PTA2021-021175-I financed by MCIN/AEI/10.13039/501100011033 and “El FSE invierte en tu futuro”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Artificial photosynthases: Single-chain nanoparticles with manifold visible-light photocatalytic activity for challenging “in water” organic reactions

  • Arena, Davide
  • Verde-Sesto, Ester
  • Rivilla, Iván
  • Pomposo, José A.
Photocatalyzed reactions of organic substances in aqueous media are challenging transformations, often because of scarce solubility of substrates and catalyst deactivation. Herein, we report single-chain nanoparticles, SCNPs, capable of efficiently catalyzing four different “in water” organic reactions by employing visible light as the only external energy source. Specifically, we decorated a high-molecular-weight copolymer, poly(OEGMA300-r-AEMA), with iridium(III) cyclometalated complex pendants at varying content amounts. The isolated functionalized copolymers demonstrated self-assembly into noncovalent, amphiphilic SCNPs in water, which enabled efficient visible-light photocatalysis of two reactions unprecedentedly reported in water, namely, [2 + 2] photocycloaddition of vinyl arenes and α-arylation of N-arylamines. Additionally, aerobic oxidation of 9-substituted anthracenes and β-sulfonylation of α-methylstyrene were successfully carried out in aqueous media. Hence, by merging metal-mediated photocatalysis and SCNPs for the fabrication of artificial photoenzyme-like nano-objects─i.e., artificial photosynthases (APS)─our work broadens the possibilities for performing challenging “in water” organic transformations via visible-light photocatalysis., We gratefully acknowledge Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”, Grant TED2021-130107A-I00 funded by MCIN/AEI/10.13039/501100011033 and Unión Europea “NextGenerationEU/PRTR,” and Grant IT-1566-22 from Eusko Jaurlaritza (Basque Government). E.V.-S. acknowledges financial support from RyC program (RYC2022-037590-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In vitro biocompatibility and endothelial permeability of branched polyglycidols generated by ring-opening polymerization of glycidol with B(C6F5)3 under dry and wet conditions

  • Pagnacco, Carlo Andrea
  • Kravicz, Marcelo H.
  • Saverio Sica, Francesco
  • Fontanini, Veronica
  • González de San Román, Estíbaliz
  • Lund, Reidar
  • Re, Francesca
  • Barroso-Bujans, Fabienne
Polyglycidol or polyglycerol (PG), a polyether widely used in biomedical applications, has not been extensively studied in its branched cyclic form (bcPG), despite extensive research on hyperbranched PG (HPG). This study explores the biomedical promise of bcPG, particularly its ability to cross the blood–brain barrier (BBB). We evaluate in vitro biocompatibility, endothelial permeability, and formation of branched linear PG (blPG) as topological impurities in the presence of water. Small angle X-ray scattering in solution revealed a fractal dimension of approximately two for bcPG and the mixture bc+blPG, suggesting random branching. Comparisons of cytotoxicity and endothelial permeability between bcPG, bc+blPG, and HPG in a BBB model using hCMEC/D3 cells showed different biocompatibility profiles and higher endothelial permeability for HPG. bcPG showed a tendency to accumulate around cell nuclei, in contrast to the behavior of HPG. This study contributes to the understanding of the influence of polymer topology on biological behavior., We gratefully acknowledge support from MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” (grant number PID2021-123438NB-I00), Basque Government (IT1566-22 and PIBA 2021-1-0034) and Diputación Foral de Guipúzcoa (RED 2023-CIEN-000047-01). R.L. acknowledges support from the Norwegian Research Council (grant number 315666). The authors are grateful to the European Synchrotron Radiation Facility, ESRF, for allocating beamtime at BM29 through the block allocation group proposal system (”Norwegian BAG”). We would like to thank Dr. Petra Pernot for assistance at the beamline at ESRF, and the Partnership for Soft Condensed Matter (PSCM) lab for their support. We acknowledge the use of the Norwegian Centre for X-ray Diffraction, Scattering and Imaging (RECX), supported by the Norwegian Research Council (NRC). This research was partially funded by Fondazione Regionale per la Ricerca Biomedica, research project “New frontiers of engineered nanovectors to improve treatment efficacy and safety in neurological–NEVERMIND Project”, project number CP2_16/2018 to F.R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unified understanding of the structure, thermodynamics, and diffusion of single-chain nanoparticle fluids

  • Mei, Baicheng
  • Moreno Segurado, Ángel J.
  • Schweizer, Kenneth S.
Single-chain nanoparticles (SCNPs) are a fascinating class of soft nano-objects with promising properties and relevance to protein condensates, polymer nanocomposites, nanomedicine, bioimaging, catalysis, and drug delivery. We combine molecular dynamics simulations and equilibrium and time-dependent statistical mechanical theory to construct a unified understanding of how the internal conformational structure of SCNPs, of both a simple fractal globule-like form and more complex objects with multiple internal intermediate length scales, determines nm-scale intermolecular packing correlations, thermodynamic properties, and center-of-mass diffusion over a wide range of concentrations up to dense melts. The intermolecular pair correlations generically exhibit a distinctive deep correlation hole form due to SCNP internal connectivity structure and repulsive interparticle interactions associated with a globular-like conformation on the macromolecular scale, with concentration-dependent deviations at small separations. Unanticipated exponential-like dependences of the equation-of-state, osmotic compressibility, and center-of-mass diffusion constant on SCNP macromolecular packing fraction are theoretically predicted and confirmed via simulations. System-specific behaviors are found associated with SCNP internal structure, but overarching regularities are identified and understood based on a generalized effective globule conformation on macromolecular scales. Diffusivity slows down by 2–3 decades with increasing concentration and is understood as a consequence of a nonactivated excluded volume-driven weak-caging process associated with space-time correlated intermolecular forces experienced by the SCNP. Good agreement between the theory and simulations is established, testable predictions are made, and a quantitative comparison with viscosity measurements on a specific SCNP fluid is carried out. The basic theoretical approach can potentially be extended to treat the chemical and physical consequences of varying the structure of other classes of soft nanoparticles with distinctive internal nanoscale organization relevant in nanotechnology and nanomedicine, and the possible emergence of macromolecular kinetically arrested glasses., B.M. and K.S.S. were supported by the U.S. Department of Energy, Office of Basic Energy Sciences, Division of Materials Sciences and Engineering under Award #DE-SC0020858, through the Materials Research Laboratory at UIUC. A.J.M acknowledges the projects PID2021-123438NB-I00 (MCIN/AEI/10.13039/501100011033, ERDF A way of making Europe) and IT1566-22 (Basque Government)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Zwitterionic ring expansion polymerization of tert-butyl glycidyl ether with B(C6F5)3 towards the generation of cyclic chains

  • Pagnacco, Carlo Andrea
  • Gastearena, Xuban
  • González de San Román, Estíbaliz
  • Matxain, Jon M.
  • Barroso-Bujans, Fabienne
The synthesis of cyclic polymers via zwitterionic ring expansion polymerization is limited to a few number of monomer and catalyst pairs. Herein we report the synthesis of cyclic poly(tert-butyl glycidyl ether) through the polymerization of tert-butyl glycidyl ether (tBGE) with B(C6F5)3 in different reaction conditions that include different solvents, monomer to initiator ratio, monomer concentration and temperature. We found that bimodal molecular weight distribution is formed in almost all reaction conditions caused by cyclization of short chains. Subsequent chain elongation leads to the formation of cycles of higher molecular weight, particularly in cyclohexane and under bulk conditions. The formation of non-cyclic byproducts is common in all the systems investigated. Low molecular weight cyclic chains (Mn = 0.7 kDa, Ð = 1.1) of high topological purity were successfully isolated by preparative gel permeation chromatography. By using a click scavenging protocol, the non-cyclic byproducts were eliminated from the high molecular weight fraction (Mn = 3 kDa, Ð = 1.3) generating pure cyclic chains. Mechanistic investigation using density functional theory calculations was performed on the formation of zwitterionic intermediates and the transfer reaction to the monomer, which notably affects chain growth by the attack of the glycidyl oxygen of the monomer on the growing chain., We gratefully acknowledge support from MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” (PID2021-123438NB-I00), and Basque Government (IT1584-22, IT1566-22 and PIBA 2021-1-0034). Xuban Gastearena thanks the Basque Government for funding through the Fellowship Number PRE_2022_1_0235., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combining linear and cyclic sulfones as a strategy for elaborating more efficient high-dielectric polymer materials: A second case of dipolar glass copolymers

  • Bonardd, Sebastián
  • Alegría, Ángel
  • Maiz, Jon
  • Díaz Díaz, David
Motivated by the excellent features exhibited by sulfone functional groups in the development of high-dielectric polymer materials, this work assesses the combination of linear and cyclic sulfone structures through copolymerization to prepare novel polymer materials exhibiting high dielectric constants (ԑr'), low dissipative behavior, and improved thermal properties. Five new polymethacrylate-based copolymers with varying compositions were synthesized through reversible addition-fragmentation chain transfer (RAFT) polymerization. The correct structure and macromolecular nature of the devised materials were confirmed by infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (1H/13C NMR), and gel permeation chromatography (GPC), while their thermal properties were evaluated using thermogravimetry analysis (TGA) and differential scanning calorimetry (DSC). All specimens exhibited adequate thermal properties for most capacitor applications in terms of onset degradation (Ti) and glass transition (Tg) temperatures. All materials degraded well above 250 °C, with increased Ti and Tg values depending on the final composition of the cyclic sulfone monomer in the material. The incorporation of cyclic sulfones not only increased the thermal robustness of the specimens but also raised their Tg values to as high as 189 °C, notably expanding the range of temperatures where these systems can operate without dissipative phenomena. More importantly, broadband dielectric spectroscopy (BDS) revealed that all samples exhibited dielectric properties notably superior to those of conventional polymer materials, with high ԑr' values between 6.0 and 8.9 (at 25 °C and 1 Hz) and low loss factors (Tan(δ) < 0.018). Overall, the present work successfully demonstrates the advantages of including cyclic structures with high dipole moments in polymeric backbones, offering a new strategy to enhance the thermal and dielectric properties of high-dielectric polymer materials., D. D. D. and S. B. thanks the Spanish Government for the projects TED2021-132847B I00/AEI/10.13039/501100011033/Unión Europea NextGenerationEU/PRTR and PID2022-142118OB-I00/MCIN/AEI/10.13039/501100011033/UE. D.D.D. also thanks Nanotec, INTech, Cabildo de Tenerife and ULL for laboratory facilities. Grant No. TED2021-130107A-I00 funded by MICIU/AEI/10.13039/501100011033 and “European Union NextGenerationEU/PRTR” is acknowledged by J. M. and S. B. Additionally, financial support from Gipuzkoako Foru Aldundia through the Programa de Red Guipuzcoana de Ciencia, Tecnología e Innovación (code: 2023-CIEN-000069-01) is also acknowledged by J. M. and S. B. Also, A.A. and J. M. gratefully acknowledge the Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe and the Grant IT-1566-22 from Eusko Jaurlaritza (Basque Government)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of the protein chain conformation on the collapse into nanoparticles

  • Le, Thu Phuong
  • Cavalcanti, Leide P.
  • Tellam, James P.
  • Malo de Molina, Paula
Protein single-chain nanoparticles can outperform synthetic nanoparticles in biomedical applications due to enhanced biocompatibility. Compared to synthetic (co)polymers, the chemical complexity of proteins challenges chain conformation control. Here, we investigate the impact of the precursor chain conformation of bovine serum albumin (BSA) on the nanoparticle structure after intramolecular cross-linking. We explore the urea concentration (denaturant), pH, salt, cross-linker length, and concentration. Small-angle neutron scattering and dynamic light scattering experiments reveal a shrinking chain conformation upon cross-linking. However, the ability to collapse depends on solvent conditions: more expanded chains collapse more, whereas proteins that are already compact barely change in size upon cross-linking. Static light scattering measurements demonstrate that binding is primarily intramolecular. The use of a shorter cross-linker does not lead to collapse of extended chains. Overall, BSA exhibits a similar behavior to that of polymer nanoparticles, which then allows to harness the precursor conformation for morphological control., The authors acknowledge the financial support received from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and Materials Physics Center on behalf of the Department of Education of the Basque Government. Financial support by MCIN/AEI/10.13039/501100011033 and “ERDF–A way of making Europe” (Grant PID2021-123438NB-I00), Eusko Jaurlaritza–Basque Government (Grant IT-1566-22)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lanthanide-based single-chain nanoparticles as “visual” pass/fail sensors of maximum permissible concentration of Cu2+ ions in drinking water

  • Pinacho-Olaciregui, Jokin
  • Verde-Sesto, Ester
  • Taton, Daniel
  • Pomposo, José A.
The maximum permissible concentration (m.p.c.) of Cu2+ ions in drinking water, as set by the World Health Organization (WHO) is m.p.c. (Cu2+)WHO = 30 × 10-6 m, whereas the US Environmental Protection Agency (EPA) establishes a more restrictive value of m.p.c. (Cu2+)EPA = 20 × 10-6 m. Herein, for the first time ever, a family of m.p.c. (Cu2+) "visual" pass/fail sensors is developed based on water-soluble lanthanide-containing single-chain nanoparticles (SCNPs) exhibiting an average hydrodynamic diameter less than 10 nm. Both europium (Eu)- and terbium (Tb)-based SCNPs allow excessive Cu2+ to be readily detected in water, as indicated by the red-to-transparent and green-to-transparent changes, respectively, under UV light irradiation, occurring at 30 × 10-6 m Cu2+ in both cases. Complementary, dysprosium (Dy)-based SCNPs show a yellow color-to-transparent transition under UV light irradiation at ≈15 × 10-6 m Cu2+. Eu-, Tb-, and Dy-containing SCNPs prove to be selective for Cu2+ ions as they do not respond against other metal ions, such as Fe2+, Ag+, Co2+, Ba2+, Ni2+, Hg2+, Pb2+, Zn2+, Fe3+, Ca2+, Mn2+, Mg2+, or Cr3+. These new m.p.c. (Cu2+) "visual" pass/fail sensors are thoroughly characterized by a combination of techniques, including size exclusion chromatography, dynamic light scattering, inductively coupled plasma-mass spectrometry, as well as infrared, UV, and fluorescence spectroscopy., The authors gratefully acknowledge Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”, Grant TED2021-130107A-I00 funded by MCIN/AEI/10.13039/501100011033 and Unión Europea “NextGenerationEU/PRTR” and Grant IT-1566-22 from Eusko Jaurlaritza (Basque Government). J. P.-O. acknowledges a predoctoral contract for the completion of his Ph.D. thesis under a joint supervision between University of the Basque Country (UPV/EHU) and University of Bordeaux (UB). The authors thank for technical and human support provided by SGIker of UPV/EHU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nonmonotonic composition dependence of viscosity upon adding single-chain nanoparticles to entangled polymers

  • Pyromali, Christina
  • Patelis, Nikolaos
  • Cutrano, Marta
  • Gosika, Mounika
  • Glynos, Emmanouil
  • Moreno Segurado, Ángel J.
  • Sakellariou, Georgios
  • Smrek, Jan
  • Vlassopoulos, Dimitris
Well-characterized single-chain nanoparticles (SCNPs), synthesized from a linear polystyrene precursor through an intramolecular [4 + 4] thermal cycloaddition cross-linking reaction in dilute conditions, were added to entangled polystyrene melts at different concentrations. Starting from the pure linear melt, which is much more viscous than the melt of SCNPs, the zero-shear viscosity increased upon the addition of nanoparticles and reached a maximum before eventually dropping to the value of the SCNP melt. Molecular simulations reveal the origin of this unexpected behavior, which is the interplay of the very different compositional dependences of the dynamics of the two components. The SCNPs become much slower than the linear chains as their concentration decreases because they are threaded by the linear chains, reaching a maximum viscosity which is higher than that of the linear chains at a fraction of about 20%. This behavior is akin to that of single-loop ring polymers when added to linear matrices. This finding provides insights into the design and use of SCNPs as effective entropic viscosity modifiers of polymers and contributes to the discussion of the physics of loopy structures., This research was partially supported by the European Union’s Horizon 2020 Programme for Research and Innovation under the Marie Skłodowska-Curie grant agreement number 765811 (DoDyNet) and by the Hellenic Foundation for Research and Innovation (H.F.R.I.) under the “Second Call for H.F.R.I. Research Projects to support Faculty members and Researchers” (project number: 4632). The computational results presented have been achieved in part using the Vienna Scientific Cluster (VSC). A.J.M. acknowledges support from MCIN/AEI/10.13039/501100011033 and “ERDF-A way of making Europe” (grant PID2021-123438NB-I00), and from Basque Government (grant IT-1566-22)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Twofold facet of kinetics of glass aging

  • Di Lisio, Valerio
  • Rocchi, Lorenzo Augusto
  • Cangialosi, Daniele
We employ fast scanning calorimetry to monitor the isothermal aging kinetics in glassy polymers, complemented with measurements on other glasses. Apart from following the time evolution of the glass enthalpic state, we monitor the aging kinetics of the devitrification width on heating, ΔT_{dev}. We find that significantly below the glass transition temperature, T_{g}, the glass enthalpy attains equilibrium earlier than ΔT_{dev}, which evolves at long aging times toward enhanced heterogeneity. Hence, our results indicate that the description of time dependent evolution in glassy materials requires information beyond the mere description of its enthalpic state., We wish to acknowledge Grant No. PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/5011000 11033 and by “ERDF A way of making Europe”; the financial support of Eusko Jaurlaritza, code IT1566-22; Grant No. PID2020–114506 GB-I00 funded by the Spanish Minister of Science and Innovation; and TED2021-129457B-I00 funded by the Spanish Minister of Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Probing the influence of composition and cross-linking degree on single-chain nanoparticles from poly(tetrahydrofuran-ran-epichlorohydrin) copolymers: Insights from neutron scattering, calorimetry, and dielectric spectroscopy

  • Verde-Sesto, Ester
  • Asenjo-Sanz, Isabel
  • Juranyi, Fanni
  • Pomposo, José A.
  • Maiz, Jon
The industrial sector has made significant strides in the development of multicomponent and multiphasic polymer materials, including polymer blends, composites (such as nanocomposites), and various copolymers. Random copolymers, characterized by their statistical arrangement of repeating units, are particularly noteworthy due to their tunability from amorphous to semicrystalline states. In this study, we focus on poly(tetrahydrofuran-ran-epichlorohydrin) (P(THF-ran-ECH)) copolymers, which serve as precursors for single-chain nanoparticles (SCNPs). These SCNP-based materials are of particular interest as they bridge the gap between traditional polymers and colloids. This research comprehensively investigates how the type and degree of internal cross-linking influence the structure and dynamics of P(THF-ran-ECH) copolymers and their SCNPs. Techniques such as quasielastic neutron scattering (QENS), differential scanning calorimetry (DSC), and broadband dielectric spectroscopy (BDS) were employed to study copolymers with varying compositions and levels of cross-linking. By analyzing two samples with different epichlorohydrin (ECH) contents (13 mol% and 27 mol%), we aim to control crystallization and explore its effects on dynamic behavior. Our results show that both the composition and the degree of cross-linking significantly impact the dynamics of the SCNPs, with SCNPs exhibiting slower dynamics compared to their precursor copolymers. Furthermore, semicrystalline samples display faster dynamics in SCNPs than amorphous samples. These findings provide valuable insights for the design and optimization of advanced multicomponent polymer systems., Grant No. PID2021-123438NB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU, Grant No. TED2021-130107A-I00 funded by MICIU/AEI/10.13039/501100011033 and “European Union NextGenerationEU/PRTR” are acknowledged. Additionally, financial support from Eusko Jaurlaritza (code: IT1566-22) and Gipuzkoako Foru Aldundia through the Programa de Red Guipuzcoana de Ciencia, Tecnología e Innovación (code: 2023-CIEN-000069-01) is acknowledged. E. V-S thanks the support from the “Ramón y Cajal” Program Grant No. RYC2022-037590-I funded by MICIU/AEI/10.13039/501100011033 and ESF+. I. A-S. acknowledges grant PTA2021-021175-I financed by MICIU/AEI/10.13039/501100011033 and ESF+., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Probing the remarkable vitrimeric performance of Poly(dithiourethanes): A comprehensive investigation into the dynamic behavior

  • Guerrero-Ruiz, Federico
  • Bonardd, Sebastián
  • Otaegi, Itziar
  • Verde-Sesto, Ester
  • Maiz, Jon
Vitrimers and vitrimer-like systems are renowned for their exceptional mechanical and thermal characteristics, coupled with their inherent recyclability. In this study, a novel class of vitrimer-like systems is introduced, wherein a tetrathiol and diisothiocyanate are blended to create poly(dithiourethanes), catalyzed by a basic catalyst. An innovative covalent adaptable network (CAN) is synthesized, featuring a glass transition temperature (Tg) of 332 K as determined by calorimetry, with a tensile modulus of 2240 MPa. The material’s properties are investigated through solubility, stress-relaxation, and creep experiments, revealing relaxation times as short as 0.7 min at 363 K, indicative of its robust dynamic behavior. Dielectric spectroscopy is employed to analyze the various relaxation processes characteristic of such materials, particularly when the topology freezing transition (Tv) occurs below the Tg. This technique complements the findings of dynamic thermomechanical analysis (DMA), enhancing our understanding of the material’s behavior. Furthermore, the materials exhibit recyclability through a grinding and compression molding cycle without significant mechanical damage. Their dielectric constant and low loss factor, combined with the reversibility of their chemical structures, position them as promising candidates for energy-related applications., Grant No. PID2021-123438NB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU, Grant No. TED2021-130107A-I00 funded by MICIU/AEI/10.13039/501100011033 and “European Union NextGenerationEU/PRTR” are acknowledged. Additionally, financial support from Eusko Jaurlaritza (code: IT1566-22) and Gipuzkoako Foru Aldundia through the Programa de Red Guipuzcoana de Ciencia, Tecnología e Innovación (code: 2023-CIEN-000069-01) is acknowledged. E. Verde-Sesto thanks the support from the “Ramón y Cajal” Program Grant No. RYC2022-037590-I funded by MICIU/AEI/10.13039/501100011033 and ESF + ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Segmental and chain dynamics of polyisoprene-based model vitrimers

  • Alegría, Ángel
  • Arbe, Arantxa
  • Colmenero de León, Juan
  • Bhaumik, Saibal
  • Ntetsikas, Konstantinos
  • Hadjichristidis, Nikos
Polymer vitrimers are a new class of materials that combine the advantages of thermoplastics and thermosets. This is due to the dynamic nature of the chemical bonds linking different chains. However, how this property affects the polymer dynamics at different length scales is still an open question. Here, we investigate the dynamics of model vitrimers based on well-defined polyisoprene (PI) chains using broadband dielectric spectroscopy. In this way, we study the polymer dynamics from the segmental to the whole chain scale, taking advantage of the fact that PI belongs to the class of molecules that exhibit a net dipole moment associated with the end-to-end vector. Three distinct relaxation phenomena are identified. The fastest relaxation is attributed to the segmental PI dynamics with a small influence of the cross-linking. An intermediate relaxation attributed to the dipolar character of the cross-linker is also observed. The slower identified relaxation component, corresponding to limited fluctuations of the end-to-end PI chains, is found to be determined by the dynamics of the clusters formed by the cross-linkers with an average time scale orders of magnitude faster than that of the terminal relaxation as inferred from the viscous flow., A.A., A.A., and J.C. gratefully acknowledge the Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe, the Grant IT-1566-22 from Eusko Jaurlaritza (Basque Government) and the Open Access funding from the University of the Basque Country. S.B., K.N., and N.H. gratefully acknowledge support from the King Abdullah University of Science and Technology (KAUST)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Why single-chain nanoparticles from weak polyelectrolytes can be synthesized at large scale in concentrated solution?

  • Pomposo, José A.
  • Arena, Davide
  • Verde-Sesto, Ester
  • Maiz, Jon
  • Malo de Molina, Paula
  • Moreno Segurado, Ángel J.
Here, the unresolved question of why single-chain nanoparticles (SCNPs) prepared from a weak polyelectrolyte (PE) precursor can be synthesized on a large scale in a concentrated solution is addressed, unlike SCNPs obtained from an equivalent neutral (nonamphiphilic) polymer precursor. The combination of the standard elastic single-chain nanoparticles (ESN) model -developed for neutral chains- with the classical scaling theory of PE solutions provides the key. Essentially, the long-range repulsion between electrostatic blobs in a weak PE precursor restricts the cross-linking process during SCNPs formation to the interior of each blob. Consequently, the maximum concentration at which PE-SCNPs can be prepared without interchain cross-linking is not determined by the full size of the PE precursor but, instead, by the smaller size of its electrostatic blobs. Therefore, PE-SCNPs can be synthesized up to a critical concentration where electrostatic blobs from different chains touch each other. This concentration can be 30 times higher than that for non-PE polymer precursors. Upon progressive dilution, the size of PE-SCNPs synthesized in concentrated solution increases until it reaches the bigger size of PE-SCNPs prepared under highly diluted conditions. PE-SCNPs do not adopt a globular conformation either in concentrated or in diluted solution. It shows that the main model predictions agree with experimental results., The authors gratefully acknowledge Grant PID2021-123438NB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU, Grant TED2021-130107A-I00 funded by MICIU/AEI/10.13039/501100011033 and “European Union NextGenerationEU/PRTR”, and Grant IT-1566-22 from Eusko Jaurlaritza (Basque Government). E.V.-S. acknowledges financial support from the “Ramón y Cajal” Program Grant No. RYC2022-037590-I funded by MICIU/AEI/10.13039/501100011033 and ESF+., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Amphiphilic single-chain polymer nanoparticles as imaging and far-red photokilling agents for photodynamic therapy in zebrafish embryo xenografts

  • Arena, Davide
  • Nguyen, Christophe
  • Ali, Lamiaa M. A.
  • Verde-Sesto, Ester
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • İşci, Ümit
  • Şahin, Zeynel
  • Dumoulin, Fabienne
  • Gary-Bobo, Magali
  • Pomposo, José A.
This work introduces rationally designed, improved amphiphilic single-chain polymer nanoparticles (SCNPs) for imaging and photodynamic therapy (PDT) in zebrafish embryo xenografts. SCNPs are ultrasmall polymeric nanoparticles with sizes similar to proteins, making them ideal for biomedical applications. Amphiphilic SCNPs result from the self-assembly in water of isolated synthetic polymeric chains through intrachain hydrophobic interactions, mimicking natural biomacromolecules and, specially, proteins (in size and when loaded with drugs, metal ions or fluorophores also in function). These ultrasmall, soft nanoparticles have various applications, including catalysis, sensing, and nanomedicine. Initial in vitro experiments with nonfunctionalized, amphiphilic SCNPs loaded with a photosensitizing Zn phthalocyanine with four nonperipheral isobutylthio substituents, ZnPc, showed promise for PDT. Herein, the preparation of improved, amphiphilic SCNPs containing ZnPc as highly efficient photosensitizer encapsulated within the nanoparticle and surrounded by anthracene units is disclosed. The amount of anthracene groups and ZnPc molecules within each single-chain nanoparticle controls the imaging and PDT properties of these nanocarriers. Critically, this work opens the way to improved PDT applications based on amphiphilic SCNPs as a first step toward ideal, long-term artificial photo-oxidases (APO)., The authors gratefully acknowledge Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe,” Grant TED2021-130107A-I00 funded by MCIN/AEI/10.13039/501100011033 and Unión Europea “NextGenerationEU/PRTR”, and Grant IT-1566-22 from Eusko Jaurlaritza (Basque Government). E.V.-S. acknowledges financial support from RyC program (RYC2022-037590-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Topology effects in photodynamic therapy with phthalocyanine nanocarriers

  • Arena, Davide
  • İşci, Ümit
  • Onofre, Mélanie
  • Nguyen, Christophe
  • Şahin, Zeynel
  • Verde-Sesto, Ester
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Gary-Bobo, Magali
  • Pomposo, José A.
  • Dumoulin, Fabienne
Two different amphiphilic copolymers, a random copolymer () and a block copolymer (), have been used to encapsulate a far-red photosensitizing hydrophobic zinc phthalocyanine while forming self-assembled nanocarriers of different topology: self-folded single-chain nanoparticles () and star-like aggregates (), respectively. Different copolymer/phthalocyanine ratios have been tested to assess their effect on structural properties which were determined by small-angle X-ray scattering (SAXS) measurements. The relevance of these materials as photosensitizer nanocarriers for photodynamic therapy (PDT) has been studied against human breast cancer cells (MCF-7). A better PDT effect was found for the (100 μg mL−1) excited at 800 nm with a pulsed laser than for the under identical conditions. Conversely, irradiation at slightly lower wavelengths (740 nm) of MCF-7 cells incubated with resulted in a notorious PDT effect when compared to that observed for MCF-7 cells incubated with the . These systems represent new strategies for the encapsulation of photosensitizers for photodynamic therapy., D. A., E. V.-S., A. I., A. A. and J. A. P. gratefully acknowledge Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”; Grant TED2021-130107A-I00 funded by MCIN/AEI/10.13039/501100011033 and Unión Europea “NextGenerationEU/PRTR”, Grant IT-1566-22 from Eusko Jaurlaritza (Basque Government), and financial support from RyC program (RYC2022-037590-I). We acknowledge the imaging facility MRI, member of the France-BioImaging national infrastructure supported by the French National Research Agency (ANR-10-INBS-04, “Investments for the future”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Kaolin clay-based geopolymer for ionic thermoelectric energy harvesting

  • Goracci, Guido
  • Ogundiran, Mary B.
  • Barzegar, Mohamad
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Dolado, Jorge S.
Geopolymers, a class of sustainable inorganic materials derived from natural and recycled resources, hold promise for various applications, including thermoelectric power generation. This study delves into the thermoelectric properties of Ikere white (IKW)-geopolymer, derived from kaolin clay, by employing rigorous measurements of thermal conductivity, electrical conductivity, and Seebeck coefficient. The investigation elucidates the pivotal role of temperature and ions in shaping the thermoelectric performance of IKW-geopolymer. Electrical conductivity analysis pinpoints ions within the geopolymer’s channels as primary contributors. Beyond a critical temperature, the evaporation of bulk water triggers a transition of charge carriers from one- to three-dimensional motion, resulting in reduced conductivity. The Seebeck coefficient exhibits a range from −182 to 42 μV/K, with its time-dependent profile suggesting that ions potentially drive thermoelectricity in cementitious materials. Notably, a unique transition from n-type to p-type behavior was observed in the geopolymer, opening new avenues for ionic thermoelectric capacitors. These insights advance our understanding of thermoelectric behavior in geopolymers and have the potential to propel the development of novel building materials for energy conversion applications., The authors also acknowledge the support provided by the PoroPCM project (PCI2019-103657), funded by MCIN/AEI/10.13039/501100011033 and cofunded by the European Union through the 2019 International Joint Programming Initiative. Additionally, the authors express gratitude for the funding received from the European Commission for the NRG-STORAGE project (GA 870114). M.B.O. acknowledges the financial support from the Women for Africa Foundation (Fundación Mujeres por África), Marid, Spain, for the research visit and thanks the Director, Centro de Física de Materiales, CSIC-UPV/EHU, San Sebastián, Spain for making available the research facilities for the study. Finally, A.I. and A.A. acknowledge the Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe,” Grant TED2021-130107A-I00 funded by MCIN/AEI/10.13039/501100011033 and Unión Europea “NextGenerationEU/PRTR,” as well as financial support of Eusko Jaurlaritza, code: IT1566-22., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Kinetics of heterogeneous polymerization of glycidol with B(C6F5)3 in toluene in the absence and presence of water

  • Gómez Urreizti, Eric
  • Gastearena, Xuban
  • Lam, Anabel
  • González de San Román, Estíbaliz
  • Miranda, José Ignacio
  • Matxain, Jon M.
  • Barroso-Bujans, Fabienne
The synthesis of polyglycidol (or polyglycerol) using tris-(pentafluorophenyl)borane [B(C6F5)3] as a catalyst produces a branched structure with a cyclic core by a mechanism of zwitterionic ring expansion polymerization. The solvent choice is limited since the polymerization does not occur in good solvents for polyglycidol (e.g. DMF, DMSO). In poor solvents for polyglycidol but good solvent for glycidol (e.g. toluene), the polymerization does occur but in a heterogeneous manner. The polymer precipitates during reaction forming two phases, the solution and precipitated phase. In the presence of water a competitive initiation mechanism consisting in the formation of hydronium ions by reaction between B(C6F5)3 and two water molecules, followed by the protonation of glycidol (Gly) epoxide is the responsible for the formation of analogous linear-core structures. In present study we evaluated the kinetic parameters of the initial stage of polymerization of Gly with B(C6F5)3 in the presence and absence of water by in situ 1H NMR monitoring in toluene-d8 phase. The results indicated first order kinetics with respect to Gly and B(C6F5)3, zero order with respect to water, similar initial rate constants for the polymerization initiated by B(C6F5)3 and H3O+ and similar activation energies for the polymerization in the absence and presence of water. The decrease in intensity of the 19F NMR signal relative to the initial value indicated that B(C6F5)3 goes to a precipitated phase just after the polymerization started due to a change in the solubility of the formed oligomeric active chains that carry the catalyst. In the precipitate, the reaction continued due to chain fusion events that take place increasing the molecular weight and producing a product with identical mass distribution as that of a polyglycidol produced under dry and solvent-free conditions. Density functional theory calculations supported the kinetic data by obtaining similar energy barriers and thermodynamic enthalpies for the reaction of Gly with B(C6F5)3 and H3O+., We gratefully acknowledge support from MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” (grant PID2021-123438NB-I00), Basque Government (IT1584-22, IT1566-22 and PIBA 2021-1-0034) and Diputación Foral de Guipúzcoa (RED 2023-CIEN-000047-01). X.G. thanks the Basque Government for funding through the Fellowship Number PRE_2022_1_0235. A.L. also thanks DIPC program for visitors. Technical and human support provided by IZO-SGI, SGIker (UPV/EHU, MICINN, GV/EJ, ERDF, and ESF), is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Clustering and nanoscale vitrimeric behavior in telechelic polybutadiene model vitrimers

  • Alegría, Ángel
  • Arbe, Arantxa
  • Colmenero de León, Juan
  • Patelis, Nikolaos
  • Bhaumik, Saibal
  • Zhou, Mingtao
  • Hadjichristidis, Nikos
Despite the promise of vitrimeric materials applications, there are many aspects that remain poorly understood. To advance the fundamental knowledge of these materials, model systems of well-controlled composition are needed. Here we report the synthesis of polybutadiene-based model vitrimers, which are further investigated with respect to their structure and dynamic properties. Four vitrimers with different cross-linking concentrations were obtained by modifying the molecular weight of the precursor functionalized polybutadiene precursors. A tetrafunctional aromatic cross-linker was used in all cases. Due to the nature of the cross-linker, the resulting vitrimers exhibit fluorescence indicative of cross-linker association. The structural investigation by small-angle X-ray diffraction showed that the cross-linkers cluster together to form very stable cylindrical structures linked by polybutadiene chains. The dynamic behavior of the vitrimers, as studied by differential scanning calorimetry and broadband dielectric spectroscopy, can be interpreted by the presence of such a cluster structure, where already a few degrees above the glass transition there are significant fluctuations of the dynamic covalent bonds, which remain essentially limited to the intracluster level─i.e., confined in the interphase between the cross-linkers’ clusters and the polymer. This results in rubber-like vitrimeric materials in which the mechanical stability is maintained by the cluster network as long as it is not perturbed by the application of high mechanical stresses, in stark contrast to recently investigated polyisoprene-based model vitrimers with flexible triamine cross-linkers, which also exhibit cluster structure., A.A., A.A. and J.C. gratefully acknowledge the Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe and the Grant IT-1566-22 from Eusko Jaurlaritza (Basque Government). N.P., S.B., M.Z., and N.H. gratefully acknowledge support from the King Abdullah University of Science and Technology (KAUST)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Computational analysis of the Lewis acid-catalyzed Zwitterionic Ring-Expansion Polymerization (ZREP) of monosubstituted ethylene oxide

  • Gastearena, Xuban
  • Barroso-Bujans, Fabienne
  • Ruipérez, Fernando
  • Matxain, Jon M.
This study investigates the reaction mechanism of the zwitterionic ring expansion polymerization (ZREP) of monosubstituted ethylene oxide using boron-based Lewis acids as catalysts to produce cyclic polyethers. The research analyzes various parameters, such as the nature of the substituents (electron-withdrawing, EWG or electron-donating, EDG), the type of catalyst, and the solvent, to understand their influence on the reaction’s kinetics, thermodynamics, and regioselectivity. Key findings include that EDGs lower the kinetic barrier of the rate-determining step and favor the reaction at the substituted carbon, while EWGs increase this barrier, making the reaction less favorable. The study also shows that all catalysts tested efficiently activate the epoxide monomer with similar barriers for the rate-determining step, and the regioselectivity trends align with the substituent’s electronic effects. Steric effects of substituents were found to dominate the competition between monomer addition and cyclization termination, with most catalysts promoting cyclization. Additionally, the solvent had minimal impact on the polymerization mechanism. This computational study provides valuable insights into the synthesis of cyclic polymers and advances the development of catalysts for ZREP of monosubstituted ethylene oxide., The authors acknowledge support from grants PID2021-123438NB-I00 and PID2023-148587NB-I00. funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU, and from the María de Maeztu Excellence Unit CEX2023-001303-M funded by MCIN/AEI/10.13039/501100011033 and Eusko Jaurlaritza (Basque Government, project IT1584-22). X.G. is thankful for financial support from the Basque Government through Fellowship PRE_2024_2_0198., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001303-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Correlation between entropy fluctuations and the dielectric relaxation of glass-forming systems: The central role of dipolar¿dipolar cross correlations

  • Arrese-Igor, Silvia
The premise that the dielectric α relaxation has a one-to-one correspondence with entropy fluctuations in equilibrium near the glass transition was experimentally verified in a systematic and quantitative manner for glass-forming systems in general. Validation of this relation was structured at different levels, taking into account various ingredients as the apolar-polar character, macromolecular structure, the presence of hydrogen bonds, or complex structure and dynamics. The results reclaim the suitability of dielectric spectroscopy to echo the primary structural relaxation of glass-forming systems, demonstrating that the dielectric response effectively captures the structural relaxation by reliably correlating with entropy fluctuations. The correlation with entropy fluctuations holds even when the dielectric strength of the systems is high and the dielectric response is narrow and dominated by cross correlations, proving that dipolar intermolecular interactions are fundamental to the structural relaxation and not a particularity of the dielectric probe. This one-to-one correspondence between structural and dielectric α relaxation does not support the existence of a generic spectral shape for the primary structural relaxation valid for all kinds of susceptibility functions., I acknowledge financial support under Grant No. PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” and Grant No. IT1566-22 by the Basque Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mesoscopic dynamics in molecular liquids: Universality of nondispersive structural mode and its reflection in self-atomic motions

  • Arbe, Arantxa
  • Arrese-Igor, Silvia
  • Ruiz-Martín, María Dolores
  • Farago, Bela
  • Álvarez González, Fernando
  • Nilsen, Gøran J.
  • Colmenero de León, Juan
Neutron spin echo experiments on deuterated and protonated molecular liquids with different interactions have revealed their coherent and incoherent scattering functions at the mesoscale. The coherent one decays by a nondiffusive exponential relaxation process that can be related to stress fluctuations. For self-dynamics, we show that even though diffusion is, as expected, the predominant relaxation channel at the mesoscale, the process observed for collective dynamics also appears at short times, evidencing the influence of stress fluctuations on translational motions even at high temperatures., The authors gratefully acknowledge the Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe and the Grant IT-1566-22 from Eusko Jaurlaritza (Basque Government), as well as the financial support received from the IKUR Strategy under the collaboration agreement between the Ikerbasque Foundation and the Materials Physics Center on behalf of the Department of Education of the Basque Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Varying the core topology in all-glycidol hyperbranched polyglycerols: Synthesis and physical characterization

  • Pagnacco, Carlo Andrea
  • Alvarez-Fernandez, Alberto
  • Maestro, Armando
  • González de San Román, Estíbaliz
  • Lund, Reidar
  • Barroso-Bujans, Fabienne
In the present study, low molecular weight cyclic polyglycidol is used as a macroinitiator for hypergrafting glycidol and producing cyclic graft hyperbranched polyglycerol (cPG-g-hbPG) in the molecular weight range of 103-106 g mol-1. Linear graft hyperbranched polyglycerol (linPG-g-hbPG) and hyperbranched polyglycerol (hbPG) are prepared as reference samples. This creates a family of hbPG structures with cyclic, linear, and star cores, allowing to evaluate their properties in solution and in bulk. The morphology study of the high molecular weight structures using atomic force microscopy revealed a spherical shape for cPG-g-hbPG and hbPG, and a cylindrical shape for linPG-g-hbPG in the nanometric range. Small angle X-ray scattering confirmed the compact particle-like structure of this family of hbPG architectures. Interestingly, the glass transition temperature showed a structure dependence, with cPG-g-hbPG having the highest values and hbPG having the lowest values for the same molecular weight. This study is a step forward in the generation of water-soluble polymers with tailored structure and functionality for advanced applications., The authors gratefully acknowledge support from MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” (grant number PID2021-123438NB-I00), Basque Government (IT1566-22) and Diputación Foral de Guipúzcoa (RED 2023-CIEN-000047-01). R.L. acknowledges support from the Norwegian Research Council (grant number 315666). The authors are grateful to the European Synchrotron Radiation Facility, ESRF, for allocating beamtime at BM29 through the block allocation group proposal system (“Norwegian BAG”). The authors would like to thank Dr. Petra Pernot for assistance at the beamline at ESRF, and the Partnership for Soft Condensed Matter (PSCM) lab for their support. The authors acknowledge the use of the Norwegian Centre for X-ray Diffraction, Scattering and Imaging (RECX), supported by the Norwegian Research Council (NRC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A novel gene delivery approach to face cystic fibrosis by non-viral vectors based on niocarbosomes

  • Maldonado, Iván
  • Gallego, Idoia
  • Enriquez-Rodriguez, Lucia
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Mashal, Mohamed
  • Attia, Noha
  • Puras, Gustavo
  • Pedraz, José Luis
Non-viral vectors are a promising approach to address genetic-based diseases, such as cystic fibrosis (CF), due to their safety profile and lower production costs compared to viral vectors. This study includes the development of conventional niosomes using the oil-in-water (o/w) emulsion technique, which were based on 2,3-di(tetradecyloxy)propan-1-amine (DTPA) cationic lipid and polysorbate 85 as a non-ionic surfactant. Additionally, novel niosomes referred to as niocarbosomes were developed incorporating carboxyl-functionalised single-walled carbon nanotubes (SWNT-COOH) as a helper component. The physicochemical properties of formulations and their complexes obtained upon the addition of genetic material, referred to as nioplexes and niocarboplexes respectively, were thoroughly examined using transmission electron microscopy (TEM), dynamic light scattering (DLS), and small-angle X-ray scattering (SAXS) techniques. Furthermore, the formation of protein corona around the non-viral vectors was investigated upon exposure to human blood plasma. Niocarbosomes complexed with pEGFP reporter gene transfected around 26% of treated cells mainly via the lipid rafts pathway, with a cell viability rate of 85%. Next, these niocarbosomes were complexed with a therapeutic plasmid coding for the cystic fibrosis transmembrane conductance regulator (CFTR) protein (pGM169) for CF treatment. Treated cells showed a 65% increase in CFTR functionality compared to untreated cells, demonstrating the potential of niocarbosome non-viral gene delivery systems to face CF disease., This work was supported by the Basque Country Government (Consolidated Groups, IT1448-22). Authors also wish to thank the intellectual and technical assistance from the ICTS “NANBIOSIS,” more specifically by the Drug Formulation Unit (U10) of the CIBER in Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN) at the University of the Basque Country (UPV/EHU). I.M. thanks the Spanish Ministry of science and innovation (Grant PID2019-106199RB-C21) predoctoral grant PRE2020-092307. L.E.R. thanks the Basque Country Government for the granted pre-doctoral fellowship (PRE_2022_1_0042). N.A. and M.M acknowledge the Spanish Ministry of Universities and the European Union-Next Generation EU for the Margarita Salas grant (MARSA21/98 and MARSA21/97, respectively) at the University of the Basque Country (UPV/EHU). A. I. and A. A. acknowledge the Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, Grant TED2021-130107A-I00 funded by MCIN/AEI/10.13039/501100011033 and Unión Europea “NextGenerationEU/PRTR”, This work benefited from the use of the SasView application, originally developed under NSF award DMR-0520547., SasView contains code developed with funding from the European Union’s Horizon 2020 research and innovation programme under the SINE2020 project, grant agreement No 654000., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chain dynamics in polyisoprene stars with arms linked by dynamic covalent bonds to the central core

  • Robles-Hernández, Beatriz
  • Patelis, Nikolaos
  • Arbe, Arantxa
  • Ntetsikas, Konstantinos
  • Bhaumik, Saibal
  • Hadjichristidis, Nikos
  • Alegría, Ángel
  • Colmenero de León, Juan
This article is part of the themed collection: Soft Matter 20th Anniversary Collection., Although the use of dynamic covalent bonding (DCB) is a promising method to obtain easily recyclable polymer networks, there are many aspects of the incorporation of dynamic covalent bonding into polymer systems that remain poorly understood. In order to gain insight into the fundamentals of these materials, well-controlled model systems are required. Here, we present the synthesis of polyisoprene (PI)-based 3-arm stars containing vinylogous urethane DCBs as linkers of the PI arms to the core of the star. The dynamics of these 3-arm stars, with three different arm sizes, is studied by broadband dielectric spectroscopy. A conventional (static) 3-arm PI star of intermediate size has also been synthesized and studied, and all results are directly compared with those of a linear PI chain. A prominent intermediate relaxation between those identified as the slower normal mode and the faster α-relaxation of PI is found in the stars containing DCBs. This relaxation, which becomes more significant as the molecular mass of the PI arms decreases, seems to originate from the dynamic bond exchange that occurs at the level of the star's core. On the other hand, the arm retraction dynamics responsible for the normal mode relaxation do not show significant differences with respect to that observed in the static star., B. R., A. A., A. A., and J. C. gratefully acknowledge the Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe, the Grant IT-1566-22 from Eusko Jaurlaritza (Basque Government) and the Open Access funding from the University of the Basque Country. N. P., K. N., S. B., and N. H. gratefully acknowledge support from the King Abdullah University of Science and Technology (KAUST) (BAS/1/1342-01-01)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

PRODAN and C120 fluorescent probes to investigate the structure of branched cyclic polyglycerol

  • Pagnacco, Carlo Andrea
  • Barroso-Bujans, Fabienne
  • Calderón, Marcelo
  • Orellano, María Soledad
Hyperbranched polyglycerols have been widely studied in biomedical applications due to their biocompatibility and chemical functionality. Branched cyclic polyglycerols, which have a cyclic structure in their central core, belong to the family of hyperbranched polyglycerols but have not been extensively explored. To better understand the potential of these novel polymers to host small molecules and to elucidate their complex structure, we proposed here the use of environmentally sensitive probes, PRODAN and Coumarin 120 (C120), which undergo changes in their fluorescence intensity and emission maxima in response to changes in the environment. To this end, the photophysical properties of both fluorescent dyes were studied in the presence of aqueous solutions of branched cyclic polyglycerol and a number of compositionally and structurally similar molecules and macromolecules, including hyperbranched polyglycerol, β-cyclodextrin, glycerol, and crown ethers such as 12-crown-4, 15-crown-5, 18-crown-6, and 2-hydroxymethyl 18-crown-6. PRODAN is able to accept hydrogen bonds and C120 is able to accept and donate hydrogen bonds. Consequently, the distinct photophysical response of PRODAN and C120 when interacting with the above molecules and macromolecules, rich in either hydroxyl or ether groups, provided valuable insights into the structure of branched cyclic polyglycerols and their ability to host small molecules., The authors gratefully acknowledge support from the Spanish Research Agency (MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, (grant number PID2021-123438NB-I00);, “María de Maeztu” Programme for Center of Excellence in R&D, grant CEX2023-001303- M funded by MICIU/AEI/ 10.13039/501100011033, the Basque Government (IT1566-22), and the Diputación Foral de Guipúzcoa (RED 2023-CIEN-000047-01), the University of the Basque Country (projects COLLAB22/05 and GIU21/033), and IKERBASQUE-Basque Foundation for Science., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001303-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unveiling the crucial morphological effect of non-conducting polymer binders on inorganic-rich hybrid electrolytes

  • Stankiewicz, Natalia
  • Focks, Leon
  • Cui, Mengyang
  • Fernández, Mercedes
  • Modin, Evgenii
  • Iturrospe, Amaia
  • Pajuelo-Corral, Oier
  • Simon, Erik
  • Arbe, Arantxa
  • Siffalovic, Peter
  • Goward, Gillian R.
  • Chuvilin, Andrey
  • Villaluenga, Irune
The limited fundamental knowledge about polymer binder selection in inorganic-rich hybrid electrolytes (HSEs) hinders their optimization and translation to an industrial scale. Herein, we investigate, for the first time, the crucial morphological effect of non-conducting polymer binders in HSEs based on a halide electrolyte (Li3InCl6). We compared the effect of the ordered nanostructured styrene–ethylene–butylene–styrene (SEBS) block copolymer and disordered polyisobutylene (PIB) homopolymer binders. This work was aimed at understanding ionic conduction transport across halide-based inorganic-rich HSEs with different polymer morphologies to optimize their design. We investigated ionic conductivity via EIS and Li+ diffusion using 7Li PFG-NMR, and the obtained results were supported by 3D reconstruction from cryo-plasma FIB-SEM images, which were further correlated with rheology measurements. PIB HSE presented higher transport properties than SEBS HSE with higher ionic conductivity (0.39 × 10−4 and 0.23 × 10−4 S cm−1 at 30 °C, respectively) and 7Li diffusion (6.3 × 10−13 and 4.3 × 10−13 m2 s−1 at 30 °C, respectively) owing to a less tortuous percolated inorganic network observed via the 3D reconstruction of cryo-plasma FIB-SEM images. Moreover, rheology measurements indicated that HSEs composed of ordered block copolymers should be processed in the disordered state (T > TODT) (in which the ordered microdomains disappear), reaching the terminal flow zone as disordered homopolymers to improve the percolated inorganic network and thereby achieving high transport properties in HSEs. Finally, Li plating/stripping demonstrated a more stable electrochemical performance of PIB HSE and higher critical current density (400 μA cm−2) compared with SEBS HSE (25 μA cm−2), which was in good agreement with the obtained transport and morphological properties., The authors acknowledge the financial support from the Spanish Ministry of Science, Agencia Estatatal de Investigacion (PID2020-115080RA-I00, CNS2023-144408). The Basque Government, Department of Education through PIBA_2024_1_0051 is acknowledged. We acknowledge the support from the María de Maeztu Excellence Unit CEX2023-001303-M funded by MCIN/AEI/10.13039/501100011033. L. F. acknowledges financial support from the German Academic Scholarship Foundation. A. A. and A. I. acknowledge the Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” and financial support from Eusko Jaurlaritza, code: IT1566-22. We acknowledge “Maria de Maeztu” Units of Excellent Programme No. CEX2020-001038-M and project EQC2021-007107-P of “Subprograma Estatal de Infraestructuras de Investigación y Equipamiento Científico-Técnico” of Spanish Ministry of Science and Innovation. We also acknowledge the support of the Slovak Research and Development Agency (APVV-20-0111). We acknowledge the financial support of the Basque Government through the IKUR Strategy. This work has received financial support from the European Union's Horizon Europe research and innovation programme under grant agreement no. 101069726 (SEATBELT project). Finally, we gratefully acknowledge the ALBA synchrotron facility (Proposal number 2024098628) for the funding and help to perform the WAXS experiments at BL11-NCD-SWEET beamline with the collaboration of ALBA staff., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001303-M)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2020-001038-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Poly(ether-imide-ester)s incorporating sulfur-containing amino acids: a first step toward more sustainable high-dielectric polymer materials

  • Bonardd, Sebastián
  • Bratukhin, Maksim
  • Guerrero-Ruiz, Federico
  • Zanchi, Sara
  • Le Goupil, Florian
  • Díaz Díaz, David
  • Pomposo, José A.
  • Maiz, Jon
The development of high-dielectric polymer materials is critical for advancing energy storage and conversion technologies. In this study, we report the synthesis and characterization of novel poly(etherimide-ester) (PEIE) polymers incorporating sulfur-based amino acid residues as dipolar units. Specifically, we designed and synthesized two PEIEs containing methionine (PEIE-Met) and its oxidized form, methionine sulfone (PEIE-Met(O2)), to investigate the impact of pendant thioether and sulfone groups on the dielectric properties. The synthesized polymers were thoroughly characterized via spectroscopic (FTIR, NMR), thermal (TGA, DSC), and dielectric (BDS) techniques. The results confirm the successful incorporation of methionine-based moieties into the polymer backbone, leading to the formation of materials showing high thermal stability, as evidenced by onset degradation temperatures above 300 °C, glass transition temperatures (Tg) in the 162–182 °C range, and excellent dielectric performance. Notably, at room temperature, PEIE-Met(O2) exhibited a higher dielectric constant ð30r ¼ 7:1 at 1 HzÞ than PEIE-Met did ð30r ¼ 5:7 at 1 HzÞ, which was attributed to the increased dipole moment of the sulfone groups. Both polymers maintained low dielectric loss values (tan(d) < 0.01) at room temperature, making them promising candidates for capacitor applications. Notably, the materials developed in this work exhibited discharge efficiency values above 85% at 100 °C under electric fields of 100 and 200 MV m−1,confirming their suitability as dielectric layers for energy storage applications. This study highlights the potential of bioderived amino acid residues as functional building blocks for high-dielectric polymer design. Our findings open new avenues for the development of sustainable, high-performance dielectric materials tailored for next-generation electronic and energy storage applications., S. B., J. A. P. and J. M. acknowledge grant no. TED2021-130107A-I00 funded by MICIU/AEI/10.13039/501100011033 and “European Union NextGenerationEU/PRTR, the grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe and the grant IT-1566-22 from Eusko Jaurlaritza (Basque Government). S. B. and J. M. are also thankful for the financial support from Gipuzkoako Foru Aldundia through the Programa de Red Guipuzcoana de Ciencia, Tecnología e Innovación (code: 2023-CIEN-000069-01). J. M. acknowledges support from the “Ramon y Cajal” Program, grant no. RYC2023-044285-I, funded by MICIU/AEI/10.13039/501100011033 and ESF+. S. Z. and F. L. G. acknowledge the financial support from the Industrial Chair SMILE within the grant agreement no. ANR-19-CHIN-0002 and the Equipex ELORPrintTec ANR-10-EQPX-28-01 with the help of the French State's Initiative d'Excellence IdEx ANR-10-IDEX-003-02. D. D. D. acknowledge Cátedra Fundación CEPSA of the ULL, Cátedra de Medioambiente y Sostenibilidad (Cabildo de Tenerife-ULL), Fundación Ramón Areces and the Ministry of Science and Innovation (project PID2022-142118OB-I00/AE/10.13039/501100011033/UE) for financial support, and Nanotec, INTech, Cabildo de Tenerife and ULL for laboratory facilities., Peer reviewed